Product Brand Standards

Transcription

1 Contents 2 Components 3 Product brand legacy endorsers 4 Sizing 5 Incorrect usage For more information on graphic standards visit UTC Aerospace Systems Brand Center. Product Brand Standards Certain of our products are marketed under a legacy name, e.g., Goodrich or Kidde. These standards explain how to apply this type of product brand effectively. UTC Aerospace Systems Graphic Identity Guidelines ISSUED of 5

2 Components UTC Aerospace Systems uses product brand legacy endorsers to market its legacy series of products. At left are two examples, identified with their key components. Legacy logo Product brand legacy endorser Product brand modifier Legacy logo Product brand modifier Product brand legacy endorser UTC Aerospace Systems Graphic Identity Guidelines ISSUED of 5

3 Product brand legacy endorsers Product brand standards Product brand legacy endorsers Product brand legacy endorsers are graphic lockups that combine our historic logos with the words UTC Aerospace Systems. Use legacy product brand endorsers to market our products only in brochures, sell sheets and trade show graphics. Do not use product brand legacy endorsers in advertisements. Never use legacy endorsers on actual products such as hardware where certified product plates are utilized. Before changing any type of product naming on certified plates, check with your SBU or business unit legal representatives. Examples of the approved endorsers are shown at left. Product brand legacy endorsers are always reproduced in full color on a white background. Product brand legacy endorsers must not be redrawn or recreated from separate graphic and type elements. The correct reproduction of the signatures can only be achieved by using the official master artwork files available on the UTC Aerospace Systems Brand Center. NOTE: When showing two or more product brand legacy endorsers together, they should be sized so that their UTC Aerospace Systems modifiers are the same size. UTC Aerospace Systems Graphic Identity Guidelines ISSUED of 5

4 Minimum size X 1/3X maximum 1/3X maximum 3.5 points 3.5 points Minimum size Product brand standards Sizing All UTC Aerospace Systems material must be clearly branded with the UTC Aerospace Systems brand. When a legacy endorser is added it is displayed in a smaller size. Here is the formula to determine the correct size relationship. Take the cap height of the words UTC Aerospace Systems in the business group brand and call it X. Size the tag line in the product brand legacy endorsers so the cap height does not exceed 1/3X. NOTE: This is the maximum size that the legacy endorser may be sized to in relation to the UTC Aerospace Systems company brand. Product brand legacy endorsers may be sized smaller than these specifications when appropriate. A 3.5 point cap height is the smallest the product brand modifier may be sized to. When the product brand legacy endorser needs to be smaller than this, it is set in type in this manner (Legacy Name) products from UTC Aerospace Systems. Do not redraw or recreate legacy endorsers from separate graphic or type elements. The correct reproduction can only be achieved by using the official master artwork files available on the UTC Aerospace Brand Center. Always respect the clear area around the UTC Aerospace Systems business group brand. Refer to the UTC Aerospace Systems Brand Center for more information. Goodrich products from UTC Aerospace Systems Typeset when used smaller than minimum size Hamilton Sundstrand products from UTC Aerospace Systems Typeset when used smaller than minimum size UTC Aerospace Systems Graphic Identity Guidelines ISSUED of 5

5 Incorrect usage Never distort Never use as a pattern is #1 Never add a phrase or modifier At left are examples of incorrect usage of product brand legacy endorsers. Do not redraw or recreate legacy endorsers from separate graphic or type elements. The correct reproduction can only be achieved by using the official master artwork files available on the UTC Aerospace Brand Center. Never use unauthorized colors Always display against a white background Never add shading, dimensioning or highlights Never place in a shape Use only approved art files Never rotate or place on the vertical axis UTC Aerospace Systems Graphic Identity Guidelines ISSUED of 5