Test Report. Report No.: AGC SS01. Attestation of Global Compliance (Shenzhen) Co., Ltd.

Size: px
Start display at page:

Download "Test Report. Report No.: AGC SS01. Attestation of Global Compliance (Shenzhen) Co., Ltd."

Transcription

1 age 1 of 14 Test Report Report o.: AGC SS01 RODUCT DESIGATIO : Laser pointer touch pen BRAD AME : /A MODEL AME : MO8097, MO8193 CLIET : Mid Ocean Brands B.V DATE OF ISSUE : Aug.18, 2017 STADARD(S) : E :2014 REORT VERSIO : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd. CAUTIO: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context.

2 Report o.: AGC SS01 age 2 of 14 TEST REORT E Safety of laser products art 1:Equipment classification and requirements Report reference o... : AGC SS01 Tested by (+ signature)... : Kangta Kang Review by (+ signature)... : Vicky Lv Approved by (+ signature)... : Matte He (Authorized officer) Date of issue... : Aug.18, 2017 Contents... : Total 14 pages Testing laboratory ame... : Attestation of Global Compliance (Shenzhen) Co., Ltd. Address... : 2/F., Building 2, o.1-o.4, Chaxi Sanwei Technical Industrial ark, Gushu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Testing location... : Same as above Applicant ame... : Mid Ocean Brands B.V Address... : Hermesweg D Barneveld The etherlands Manufacturer ame... : Address... : Test specification Standard... : E :2014 Test procedure... : type test rocedure deviation... : /A on-standard test method... : /A Test Report Form/blank test report Test Report Form o.... : AGC A2 TTRF originator... : AGC Master TTRF... : Dated

3 Report o.: AGC SS01 age 3 of 14 Test item roduct designation... : Laser pointer touch pen Brand name... : /A Model ame... : MO8097, MO8193 Rating(s)... : 4.5V (Built-in 3 pcs button cell) rotection Class of equipment... : Class 2 Test case verdicts Test case does not apply to the test object : (/A) Test item does meet the requirement... : (ass) Test item does not meet the requirement.. : F(ail) Testing Date of receipt of test item... : Aug.09, 2017 Date(s) of performance of test... : Aug.16, 2017 Attachments Attachment A... : hotos of product General remarks This report shall not be reproduced except in full without the written approval of the testing laboratory. The test results presented in this report relate only to the item tested. Clause numbers between brackets refer to clauses in IEC (E ). "(see remark #)" refers to a remark appended to the report. "(see Annex #)" refers to an annex appended to the report. Throughout this report a comma is used as the decimal separator. Report Revise Record Report Version Revise Time Issued Date Valid Version otes V1.0 / Aug.18, 2017 Valid Original report General product information The two models have the same laser module, just the apperance is different. Summary of testing The test part of product was classified as Class 2 product. Copy of marking plate

4 Report o.: AGC SS01 age 4 of 14 E EGIEERIG SECIFICATIOS 4.1 General remarks Modification 4.2 rotective housing General Service Removable laser system 4.3 Access panels and safety interlocks Access panels of protective housing roduct Class...: Accessible emission during removal of access panel...: The removal of the panel gives access to laser radiation levels designated by X in the table Accessible emissions after removal...: Deliberate override mechanism 4.4 Remote interlock connector 4.5 Manual reset 4.6 Key control 4.7 Laser radiation emission warning Class 3R (λ<400 nm; λ>700 nm), 3B and Audible or visible warning Operational control and laser aperture Laser emission distributed through more than one output 4.8 Beam stop or attenuation 4.9 Controls 4.10 Viewing optics a) Human access to laser radiation in excess of Class 1M prevented when the shutter is opened or attenuation varied b) Opening of the shutter or variation of the attenuation prevented when exposure to laser radiation in excess of Class 1M is possible

5 Report o.: AGC SS01 age 5 of 14 E Scanning safeguard 4.12 Walk-in access a) Means provided so that any person inside the housing can prevent activation of a Class 3B or 4 laser hazard b) A warning device provides adequate warning of emission to any person within the housing c) Where walk-in access during operation is intended or reasonably foreseeable, emission of laser radiation that is equivalent to Class 3B or Class 4 while someone is present inside the enclosure of Class 1, Class 2 or Class 3R product shall be prevented by engineering means 4.13 Environmental conditions - climatic conditions - vibration and shock 4.14 rotection against other hazards on-optical hazards (product safety standard) - electrical hazards; - excessive temperature; - spread of fire from the equipment; - sound and ultrasonic; - harmful substances; - explosion; Collateral radiation 5 LABELLIG 5.1 General LASER RODUCT CLASS...: Class 2 Labelling location (roduct / User instruction / ackage) Warning label Hazard symbol (Figure 1) Explanatory label (Figure 2) Text on explanatory label...: See copy of marking plate 5.7 Aperture label 5.8 Radiation output and standards information

6 Report o.: AGC SS01 age 6 of 14 E Max output of laser radiation...: ulse duration...: -- Emitted wavelength...: The name and publication date of the standard...: 5.9 Labels for access panels a) f) Warning wording used...: Labels for safety interlocked panels Warning wording used...: 5.10 Warning for invisible laser radiation...: 5.11 Warning for visible laser radiation...: 6 OTHER IFORMATIOAL REQUIREMETS 6.1 Information for the user a) adequate instructions for proper assembly, maintenance and safe use and description of the classification limitations, if appropriate b) warning for Class 1M and 2M c) laser beam parameters for radiation above the AEL of Class 1 Wavelength...: 655nm Beam divergence...: 50 ulse duration...: Maximum power or energy output...: 0.496mW d) embedded laser products and other incorporated laser products e) ME and OHD for Class 3B and Class 4 laser products For collimated beam Class 1M and 2M lasers the extended OHD (EOHD) f) information for the selection of eye protection g) reproduction of labels h) location of laser apertures i) listing of controls, adjustment of procedures and warning statement j) information about laser energy source if not incorporated in the manual

7 Report o.: AGC SS01 age 7 of 14 E urchasing and service information a) safety classification of each laser product stated in descriptive material b) adequate instructions for servicing available 7 ADDITIOAL REQUIREMETS FOR SECIFIC LASER RODUCTS 7.1 Applicable other parts of the standard series IEC/E IEC (Safety of optical communication systems) IEC (Laser guards) IEC (Safety of free space optical communication systems used for transmission of information) Further information may be found in: IEC/TR (Guidance for laser displays and shows) IEC/TR (Manufacturer s checklist for IEC ) IEC/TR (Guidelines for the safe use of laser beams on humans) IEC/TR (Compilation of maximum permissible exposure to incoherent optical radiation) IEC/TR (Application guidelines and explanatory notes to IEC ) IEC/TR (Measurements for classification of laser products) IEC/TR (A user s guide) IEC (CIE S 009) (hotobiological safety of lamps and lamp system) 7.2 Medical laser products Class 3B and Class 4 medical laser products comply with IEC Laser processing machines Comply with IEC/ISO Electric toys Comply with IEC Consumer electronic products

8 Report o.: AGC SS01 age 8 of 14 E Complying with IEC or IEC CLASSIFICATIO 8.2 Classification responsibilities 8.3 Classification rules 8.3a Radiation of a single wavelength 8.3b Radiation of multiple wavelengths 1) Laser product emission two or more wavelengths in spectral regions shown as additive in Table 5... : 2) Laser product emission two or more wavelengths in spectral regions not shown as additive in Table 5... : 8.3c Radiation from extended sources...: 1.5mrad (assumed) Value of angular subtense (mrad)... : min. 8.3d on-uniform retinal image radiance profile, noncircular and multiple sources 8.3e Time basis 1) 0.25s 2) 100s 3) 30000s 8.3f Repetitively pulsed or modulated lasers 1) Exposure from any single pulse not exceeding the AEL for a single pulse 2) Average power for a pulse train 3a) Constant pulse energy and pulse duration 3b) Varying pulse widths or varying pulse durations 9 DETERMIATIO OF ACCESSIBLE EMISSIO LEVELS 9.1 Tests Single fault eliminated Housing material withstanding degradation Fault detection 9.2 Measurement conditions... : a, b, c, d, e, f, h

9 Report o.: AGC SS01 age 9 of 14 E Measured laser radiation... : See table measured laser radiation, calculations and comparison with AEL limits 9.3 Measurement geometry General, evaluation scheme a) Simplified (default) method b) Increased AEL by parameter C Default (simplified) evaluation Condition applied... : Condition 2 Aperture stop diameter (mm)... : 7mm Measurement distance (mm)... : 70mm Extended sources C 6... : C 6= a Aperture diameters Condition applied... : Aperture stop diameter (mm).... : Angular subtense of the apparent source... : 9.3.3b Angle of acceptance Condition applied... : 1) hotochemical retinal limits... : Angel of acceptance... : 2) All other retinal limits... : Angel of acceptance... :

10 Report o.: AGC SS01 age 10 of 14 E TABLE: Calculation of Accessible emission limit (AEL) Class 2 Time base t: 0.25s Wavelength λ : 655.0nm Beam shape Angular Subtense α: 1,5mrad osition of app. source: Distance r (Rth): 70mm Distance r (hc): Aperture d (Rth): 7mm Aperture d (hc): Angle of acc. γp (Rth): Angle of acc. γ p (hc): Breakpoint T1: ulse width t pw: Breakpoint T2: eriod duration: C1: umber of pulses : C2: C 5: C3: C 6: 1 C4: C 7: AEL limits: = 1mW ote(s): TABLE: Radiant power under normal and fault condition Ambient temperature: 25 C Ambient radiation: 0.397µW compensated with zero function of power meter Measurement condition: Condition 2 according to standard. Measurement Input current Measured radiant power ormal condition* mw Fault condition : Resistor short circuit mw ote(s): *: Under normal operation, the output light shape of the product as a line. Conclusion: The measured emission level of the product did not exceed the accessible emission level of Class 2; the test subject was classified as Class 2 Laser product. Appended table EQUIMET MAUFACTURE IFORMATIO ( DATA SHEET ) ABOUT THE COTAIIG LASER COMOET/S Manufacturer... : Symbol technologies Inc.

11 Report o.: AGC SS01 age 11 of 14 E Type designation... : -- Structure... : -- Wavelength... : 655nm Output power (min. and max.)... : -- Radiation is Continuous... : Yes ulsed... : o ulse time... : o ulse repetition frequency... : o Others... : o IC U UIT Manufacturer... : Type designation... : Others... : TRASMITTER/TRASCIEVER UIT Manufacturer... : Type designation... : Others... :

12 Report o.: AGC SS01 age 12 of 14 Attachment A hotos of product Fig.1 Overall view Fig.2 art view

13 Report o.: AGC SS01 age 13 of 14 Fig.3 art view Fig.4 art view

14 Report o.: AGC SS01 age 14 of 14 Fig.5 art view ---End of Report---

TEST REPORT IEC , 2 nd Edition Part 1: Equipment classification and requirements

TEST REPORT IEC , 2 nd Edition Part 1: Equipment classification and requirements Test Report issued under the responsibility of: TEST REORT IEC 60825-1, 2 nd Edition art 1: Equipment classification and requirements Report Reference No....: EFSH15041135-IE-01-L01 Date of issue...: May

More information

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS1611293204S TEST REORT Safety of laser products - art 1: Equipment classification and requirements Report Number.... : LCS1611293204S Date of

More information

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements. TÜV Rheinland Shanghai Co., Ltd.

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements. TÜV Rheinland Shanghai Co., Ltd. Test Report issued under the responsibility of: TEST REORT IEC 60825-1 Safety of laser products - art 1: Equipment classification and requirements Report Number.... : 50089797 001 Date of issue... : 2017.07.25

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60825-1 1993 AMENDMENT 2 2001-01 PUBLICATION GROUPÉE DE SÉCURITÉ GROUP SAFETY PUBLICATION Amendment 2 Safety of laser products Part 1: Equipment classification, requirements

More information

AS/NZS IEC :2014

AS/NZS IEC :2014 AS/NZS IEC 60825.1:2014 (IEC 60825-1, Ed. 3.0:2014, IDT) Australian/New Zealand Standard Safety of laser products Part 1: Equipment classification and requirements Superseding AS/NZS IEC 60825.1:2011 AS/NZS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT IEC TR 60825-14 First edition 2004-02 Safety of laser products Part 14: A user's guide Reference number IEC/TR 60825-14:2004(E) Publication numbering As from 1 January 1997 all IEC publications

More information

TEST REPORT IEC and/or EN Photobiological safety of lamps and lamp systems

TEST REPORT IEC and/or EN Photobiological safety of lamps and lamp systems Test Report issued under the responsibility of: TEST REORT IEC 62471 and/or EN 62471 hotobiological safety of lamps and lamp systems Report Reference No.... : GZES130300236831 Tested by (name + signature)...

More information

GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO., LTD

GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO., LTD CONSUMER PRODUCTS SERVICES DIVISION Date Received: May 25, 2016 Page 1 of 7 GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO., LTD LAIMEI INDUSTRIAL ZONE,CHENGHAI DISTRICT, SHANTOU, GUANGDONG Sample Description:

More information

Photobiological safety of lamps and lamp systems

Photobiological safety of lamps and lamp systems Test Report issued under the responsibility of: Intertek Testing Services, NA Inc. TEST REORT hotobiological safety of lamps and lamp systems Report Reference No.... : 103125175CRT-001 Date of issue...

More information

Contains Nonbinding Recommendations. Draft Not for Implementation

Contains Nonbinding Recommendations. Draft Not for Implementation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Classification and Requirements for Laser Illuminated Projectors (LIPs) (Laser Notice No. 57) Draft Guidance

More information

*For inquiries and questions about lasers, see the Yellow-Page.

*For inquiries and questions about lasers, see the Yellow-Page. 13. Lasers *For inquiries and questions about lasers, see the Yellow-Page. Since lasers have high energy densities, not only the direct but also the scattered light may cause burns, fires or damage to

More information

TEST REPORT IEC Safety of household and similar electrical appliances Part 2: Particular requirements for massage appliance

TEST REPORT IEC Safety of household and similar electrical appliances Part 2: Particular requirements for massage appliance Test Report issued under the responsibility of: SGS- CSTC TEST REORT Safety of household and similar electrical appliances art 2: articular requirements for massage appliance Report Reference No....: GZES100800181503

More information

American National Standard for Safe Use of Lasers

American National Standard for Safe Use of Lasers ANSI Z136.1-2007 Revision of ANSI ZI36.1-2000 American National Standard for Safe Use of Lasers Secretariat Laser Institute of America Approved March 16, 2007 American National Standards Institute, Inc.

More information

Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual. EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6

Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual. EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6 Title: Laser Safety Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6 PURPOSE: SCOPE: To protect University

More information

Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7

Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7 Environmental Health and Safety Manual Policy Number: EH&S 6-8 Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7 PURPOSE: SCOPE: To protect University employees against health

More information

G4 Pulsed Fiber Laser

G4 Pulsed Fiber Laser G4 Pulsed Fiber Laser OEM Safety and System Integration Manual Module types C1 and C2 Module type C1 - fitted with IBeam1 delivery optic Module type C2 - fitted with IBeam2 delivery optic 1 1 Preface Definition

More information

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements Test Report issued under the responsibility of: TEST REPORT IEC 60825-1 Safety of laser products - Part 1: Equipment classification and requirements Report Number.... : 102254161MPK-001L Date of issue...

More information

Policy Redesign Project. Laser safety. Table of Contents

Policy Redesign Project. Laser safety. Table of Contents Policy Redesign Project All policies and procedures are being reviewed as part of this project. This document is pending review, but remains in effect until the review is carried out. Laser safety Establishment:

More information

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6 Applicant: Y. Lin Electronics Co., Ltd. No. 3 Xinguang Road, Jinhe The third Industrial Zone, Zhangmutou Town, Dongguan,. Guangdong, China. Number: Date: 11 Feb 2015 15020100HKG-001 Sample Description

More information

Laser Use at Subaru Telescope (NAOJ) Laser Safety Policy

Laser Use at Subaru Telescope (NAOJ) Laser Safety Policy Laser Use at Subaru Telescope (NAOJ) Laser Safety Policy 1. Introduction This program applies to all lasers and laser systems operated by Subaru Telescope. This program maintains compliance with ANSI Z136.1-2007

More information

Laser Safety. This Laser Safety Program applies to the acquisition, use, transfer, and disposal of all Class 3B and 4 lasers at UNC Asheville.

Laser Safety. This Laser Safety Program applies to the acquisition, use, transfer, and disposal of all Class 3B and 4 lasers at UNC Asheville. Laser Safety The UNC Asheville laser safety program requires that all lasers and laser systems be operated in accordance with the American National Standards Institute (ANSI) Z136.1 2007, American National

More information

Model No.: VS806-6N ( ) V~ 50/60Hz LED 6x4W

Model No.: VS806-6N ( ) V~ 50/60Hz LED 6x4W Reference o.:wtf13f1210249r1s age 2 of 10 Test item description... : Trade Mark... : --- Model/Type reference... : Ratings... : Copy of marking plate: Ceiling Lamp VS806-6(180.003590); VS806-6(180.003591),

More information

G4 Pulsed Fiber Laser

G4 Pulsed Fiber Laser G4 Pulsed Fiber Laser OEM Safety and System Integration Manual Module types B1 and B4 Module type B1 - fitted with ILLK beam delivery optic Module type B4 - fitted with ILOC beam delivery optic 1 1 Preface

More information

A. Administrative. B. Labeling and Posting. C. Control Measures. Laser Safety Self-Audit Checklist. Building Room Principal Investigator Date

A. Administrative. B. Labeling and Posting. C. Control Measures. Laser Safety Self-Audit Checklist. Building Room Principal Investigator Date Laser Safety Self-Audit Checklist Building Room Principal Investigator Date Audit Performed by A. Administrative 1. Lasers are classified appropriately (2, 3a, 3b, 4a, 4b) 2. Standard operating procedures

More information

Important Safety Notice

Important Safety Notice Date: 27 th April 2015 Page 1 of 12 SPI Lasers UK Limited Safety Information High Power OEM Fibre Lasers Important Safety Notice This notice outlines important safety related information and must be read

More information

LUXEON S. Philips Lumileds does not recommend staring directly into any LED lamp or luminaire. LUXEON S Photobiological Safety Report

LUXEON S. Philips Lumileds does not recommend staring directly into any LED lamp or luminaire. LUXEON S Photobiological Safety Report LUXEON S Photobiological Safety Report Application Brief AB81 LUXEON S Photobiological Safety Report Introduction Light Emitting Diodes (LEDs) are incoherent, broad-band optical light sources that span

More information

3kW 6kW, QUBE Fiber Lasers

3kW 6kW, QUBE Fiber Lasers 3kW 6kW, QUBE Fiber Lasers CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 SHARE UNITS 3 1.5 ALIGNMENT LASER 3 1.6 POWER DISTRIBUTION 4 1.7 WATER COOLING REQUIREMENTS

More information

LUXEON Rebel. Philips Lumileds does not recommend staring directly into any LED lamp or luminaire. LUXEON Rebel Photobiological Safety Report

LUXEON Rebel. Philips Lumileds does not recommend staring directly into any LED lamp or luminaire. LUXEON Rebel Photobiological Safety Report LUXEON Rebel Photobiological Safety Report Application Brief AB60 LUXEON Rebel Photobiological Safety Report Introduction Light Emitting Diodes (LEDs) are incoherent, broad-band optical light sources that

More information

LASER SAFETY BARRIER

LASER SAFETY BARRIER LASER SAFETY BARRIER 5' x 6' Portable Laser Barrier No-Trip Base Design High CW and Pulsed Damage Thresholds SB5X6 All Contents Stored In Base OVERVIEW Features Portable 5' x 6' (1.5 m x 1.8 m) Barrier

More information

Hazard Analysis, Mitigation, and Operating Procedures for (Laser name) Laser

Hazard Analysis, Mitigation, and Operating Procedures for (Laser name) Laser Hazard Analysis, Mitigation, and Operating Procedures for (Laser name) Laser Prepared by: Date: Rev. 6/24/2016 Page 1 of 6 Table of contents Summary of identified hazards and hazards mitigation: 1. General

More information

Laser Safety Program

Laser Safety Program Laser Safety Program Revised December 14, 2017 Prepared by: Brandon S. Chance, MS, CCHO Associate Director of Environmental Health and Safety Office of Risk Management Table of Contents Introduction...

More information

North Dakota State University Laser Safety

North Dakota State University Laser Safety North Dakota State University Laser Safety I. Introduction The laser represents a class of light emitting devices with unique characteristics. Some of these characteristics can result in significant hazards.

More information

LASER SAFETY PROGRAM

LASER SAFETY PROGRAM LASER SAFETY PROGRAM GUIDE FOR THE SAFE USE OF LASERS FOR CALIFORNIA STATE UNIVERSITY, LOS ANGELES (CSULA) December 2012 PROGRAM APPROVAL AND AUTHORIZATION James M. Rosser, President Date Contents 1.0.

More information

Laser Safety and Classification Full Version (CA-1110) Advanced Version (CA-1111) Basic Version (CA-1112)

Laser Safety and Classification Full Version (CA-1110) Advanced Version (CA-1111) Basic Version (CA-1112) Laser Safety and Classification Full Version (CA-1110) Advanced Version (CA-1111) Basic Version (CA-1112) The spectral range of lasers vary from a few nanometer up to some hundred micrometers and is mostly

More information

Test Report. Shenzhen Longsin Intelligence Technology Co.Ltd.

Test Report. Shenzhen Longsin Intelligence Technology Co.Ltd. Test Report repared For : Shenzhen Longsin Intelligence Technology Co.Ltd. 4 th floor,building 2,Kaijeda Industrial Area,Huachang Road, Longhua Town,Baoan,Shenzhen. Trade Mark: Longsin roduct Name: Model

More information

Laser Safety Self-Audit Checklist

Laser Safety Self-Audit Checklist Laser Safety Self-Audit Checklist Building Room Principal Investigator Date A. Administrative 1. Lasers are classified appropriately (IIIb, IV) 2. Standard operating procedures are available 3. Alignment

More information

Laser Radiation and High Voltage/Electrical Shock. Disclaimer and Limitation of Liability. Shipping Damage. Trademarks

Laser Radiation and High Voltage/Electrical Shock. Disclaimer and Limitation of Liability. Shipping Damage. Trademarks DANGER Laser Radiation and High Voltage/Electrical Shock The ILRIS-LR is an inherently dangerous system: Follow safety instructions carefully and consider safety issues at all times. Before operating or

More information

NEED FOR LASER SAFETY

NEED FOR LASER SAFETY NEED As our use of lasers increases, we have a tendency to think of them as commonplace, and we begin to forget that these small, often invisible light sources are able to cause permanent damage to our

More information

ANSI Z136.1-CDV Status on Updates for Next Revision & Work by TSC-4 Committee on Control Measures and Training

ANSI Z136.1-CDV Status on Updates for Next Revision & Work by TSC-4 Committee on Control Measures and Training ANSI Z136.1-CDV Status on Updates for Next Revision & Work by TSC-4 Committee on Control Measures and Training American National Standard Z136 Series Z136.1 for Safe Use of Lasers Z136.3 Z136.4 Z136.5

More information

This is a preview - click here to buy the full publication

This is a preview - click here to buy the full publication TECHNICAL REPORT IEC TR 62778 Edition 2.0 2014-06 colour inside Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires INTERNATIONAL ELECTROTECHNICAL COMMISSION

More information

Content. Laser physics Laser treatment parameters Laser safety. by Fotona d.o.o., 2017

Content. Laser physics Laser treatment parameters Laser safety. by Fotona d.o.o., 2017 Laser Physics Content Laser physics Laser treatment parameters Laser safety 2 LASER PHYSICS 3 Light 4 Interaction of the light with tissue REFLECTION ABSORPTION TRANSMISSION 5 Laser light Monochromatic

More information

Laser Safety Management

Laser Safety Management Properties of Laser light Laser Safety Management Danny Fok Monochromatic (single wavelength) Directional (almost parallel low angular divergency) Coherent (in phase) Pulse or continuous Beam can be focused

More information

Optical Measurement Techniques for LED Clusters and LED Safety

Optical Measurement Techniques for LED Clusters and LED Safety Optical Measurement Techniques for LED Clusters and LED Safety Hugh Barton OptiConsulting UK A presentation to EuroLEDs conference 16-May-2006 Stor-Lampe 1 OptiConsulting UK Optical metrology, Optical

More information

LASER SAFETY. Class 2 and 2a - low power, low risk Class 2 and 2a lasers have low power and emit visible light. They will cause harm if viewed

LASER SAFETY. Class 2 and 2a - low power, low risk Class 2 and 2a lasers have low power and emit visible light. They will cause harm if viewed LASER SAFETY Laser is an acronym for light amplification by stimulated emission of radiation. Radiation in this case occurs in the portions of the electromagnetic field with insufficient energy to induce

More information

Provläsningsexemplar / Preview TECHNICAL REPORT. Part 3-1: Conformity verification report for IEC :2001 General requirements

Provläsningsexemplar / Preview TECHNICAL REPORT. Part 3-1: Conformity verification report for IEC :2001 General requirements TECHNICAL REPORT IEC TR 61010-3-1 Second edition 2003-04 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 3-1: Conformity verification report for IEC 61010-1:2001

More information

CATALOGUE LASER POINTERS

CATALOGUE LASER POINTERS CATALOGUE LASER POINTERS SM.PROX SRL Via della Beverara 13/A - 40131 Bologna - Italy Tel. +39 051 6350755 - Fax +39 051 6353462 Edition October 2014 With the publication of this catalogue all former editions

More information

Rice University Laser Safety Manual

Rice University Laser Safety Manual Rice University Laser Safety Manual Environmental Health and Safety MS 123 P.O. Box 1892 Houston, TX 77251-1892 January 2014 RICE UNIVERSITY 1 Introduction The objective of the Rice University Laser Safety

More information

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6 Applicant: Y. Lin Electronics Co., Ltd. No. 3 Xinguang Road, Jinhe The third Industrial Zone, Zhangmutou Town, Dongguan,. Guangdong, China. Number: Date: 11 Feb 2015 15020097HKG-001 Sample Description

More information

Page 2 of 14 Report Ref. No

Page 2 of 14 Report Ref. No age 2 of 14 Summary of testing: Tests performed (name of test and test clause): Clause 6.1, Initial measurements: - MST 01: Visual inspection - 10.2: Maximum power determination - MST 16: Dielectric withstand

More information

Laser Safety Citations

Laser Safety Citations General 1. Lasers are classified appropriately Classify lasers and laser systems according to their relative hazards MSU Laser Safety Manual - Laser Classification, pg 9 2. Beam attenuator present A beam

More information

Copy of marking plate:

Copy of marking plate: DOGGUA EMTEK CO., LTD. REORT O.: ED140115093S Copy of marking plate: Summery of test: 1. The AC/DC ADATER complied with level V (refer to International Efficiency Marking rotocol ). 2. The EUT was tested

More information

Not to be reproduced without the permission of Last date for receipt of BIS or used as a STANDARD comments is: 15 July 2012

Not to be reproduced without the permission of Last date for receipt of BIS or used as a STANDARD comments is: 15 July 2012 For Comments Only Draft Indian Standard Graphic technology -- Safety systems -- Part 1: General requirements ICS 37.100.10 Not to be reproduced without the permission of Last date for receipt of BIS or

More information

order code: EQLA08 user manual

order code: EQLA08 user manual ORION order code: EQLA08 user manual WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and liquids.

More information

9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series

9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series COMMERCIAL LASERS 9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series Key Features Diffraction-limited light delivered through fiber termination module Single transverse mode, collimated beam

More information

Rutgers Environmental Health and Safety (REHS)

Rutgers Environmental Health and Safety (REHS) Rutgers Environmental Health and Safety (REHS) Program Name: Laboratory Laser Safety Program Responsible Executive: Executive Director of REHS Adopted: February 20, 2001 Reviewed/Revised: July 10, 2018

More information

Inspection Detail. General Questions for Laser Labs

Inspection Detail. General Questions for Laser Labs Laser Lab Inspection Checklist Building/Room: Authorized User: Inspection #: Inspection Detail 1 This inspection is General Questions for Laser Labs 2 Laser Users List Verified by Laser Supervisor? 3 Laser

More information

ISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly

ISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly INTERNATIONAL STANDARD ISO 22827-1 First edition 2005-10-15 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly Essais de réception pour

More information

w w w. p r o l i g h t. c o. u k USER MANUAL Order code: EQLA15

w w w. p r o l i g h t. c o. u k USER MANUAL Order code: EQLA15 w w w. p r o l i g h t. c o. u k USER MANUAL Order code: EQLA15 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised

More information

West Virginia University Laser Safety Program

West Virginia University Laser Safety Program I. Statement, Purpose, and Scope A. Statement: The University is committed to providing a safe and healthful workplace; this includes evaluating and taking action to prevent laser related exposures. B.

More information

American National Standard

American National Standard ANSI Z136.9 2013 American National Standard American National Standard for Safe Use of Lasers in Manufacturing Environments ANSI Z136.9 2013 First Printing American National Standard for Safe Use of Lasers

More information

ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. Address...:

ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. Address...: Test Report issued under the responsibility of: TEST REORT IEC 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) art 1: General

More information

PENALTIES. All imported products are required to meet the same standards as domestic goods. National Safety Requirements. Customs Requirements

PENALTIES. All imported products are required to meet the same standards as domestic goods. National Safety Requirements. Customs Requirements 1 of 15 Short Course On: Importation Requirements of Laser Products ICALEO 2006 Version 11-01-06wbkgrd Course Topics Discuss the penalties associated with improperly or illegally importing a laser product.

More information

Provläsningsexemplar / Preview TECHNICAL REPORT. Safety of laser products. Part 8: Guidelines for the safe use of medical laser equipment

Provläsningsexemplar / Preview TECHNICAL REPORT. Safety of laser products. Part 8: Guidelines for the safe use of medical laser equipment TECHNICAL REPORT IEC TR 60825-8 First edition 1999-11 Safety of laser products Part 8: Guidelines for the safe use of medical laser equipment Sécurité des appareils à laser Partie 8: Lignes directrices

More information

NX8601BF-AA. Data Sheet R08DS0109EJ0100 Rev.1.00 Apr 19, 2013 LASER DIODE DESCRIPTION FEATURES

NX8601BF-AA. Data Sheet R08DS0109EJ0100 Rev.1.00 Apr 19, 2013 LASER DIODE DESCRIPTION FEATURES A Business Partner of Renesas Electronics Corporation. NX8601BF-AA LASER DIODE 1 625 nm InGaAsP MQW-DFB LASER DIODE COAXIAL MODULE FOR OTDR APPLICATION Data Sheet R08DS0109EJ0100 Rev.1.00 DESCRIPTION The

More information

Laser Use Registration & Application (L.U.R.)

Laser Use Registration & Application (L.U.R.) College of Science & Engineering San Francisco State University 1600 Holloway Avenue, TH323 San Francisco, California 94132-4163 (415) 338-6892 FAX (415) 338-6136 L.U.R. # COSE- Laser Use Registration

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 113 Sensor SERIES Related Information General terms and conditions... F-7 About laser beam... P.199~ Sensor selection guide... P.1~ General precautions... P.11 PHOTO PHOTO PARTICUR MEASURE ITY panasonic.net/id/pidsx/global

More information

EN50438 TEST REPORT SUMMARY. Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks

EN50438 TEST REPORT SUMMARY. Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks TEST REORT SUMMARY EN 50438 Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks Report reference number... : 12TH0525-EN50438_SUM_0 Date of issue......:

More information

CONTRACTOR WHS HAZARD STANDARD LASER SAFETY EXTERNAL USE ONLY

CONTRACTOR WHS HAZARD STANDARD LASER SAFETY EXTERNAL USE ONLY CONTRACTOR WHS HAZARD STANDARD LASER SAFETY EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition WHS

More information

Laser Safety Products. Edition 20

Laser Safety Products. Edition 20 Laser Safety Products Edition 20 Frequently Asked Questions How long will my glasses protect me? There is no simple answer to this question. Some glasses are worn-out after only one year, while others

More information

Lasers and Laser Safety

Lasers and Laser Safety Lasers and Laser Safety A short course taught as part of module PY3108 Department of Physics 1 Contents Basics of Lasers and Laser Light Laser Beam Injuries Laser Hazard Classes Laser Safety Standards

More information

LASER DIODE NX7637BF-AA

LASER DIODE NX7637BF-AA 1 625 nm InGaAsP MQW-FP LASER DIODE COAXIAL MODULE FOR OTDR APPLICATION LASER DIODE NX7637BF-AA DESCRIPTION The NX7637BF-AA is a 1 625 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode

More information

FIRERAY 5000 range USER GUIDE

FIRERAY 5000 range USER GUIDE FIRERAY 5000 range USER GUIDE 0044-003-04 IMPORTANT PLEASE NOTE: The beam path MUST be kept clear of obstructions at all times! Failure to comply may result in the Detector initiating a Fire or Fault signal.

More information

SECTION 1: STARTING 1.1 UNPACKING AND INSPECTION

SECTION 1: STARTING 1.1 UNPACKING AND INSPECTION SECTION 1: STARTING 1.1 UNPACKING AND INSPECTION Upon receipt of the laser system, inspect the shipping containers for gross external damage. Unpack the unit and inspect for internal damage. If any damage

More information

THE UNIVERSITY OF TEXAS RIO GRANDE VALLEY LASER SAFETY MANUAL. August 2016

THE UNIVERSITY OF TEXAS RIO GRANDE VALLEY LASER SAFETY MANUAL. August 2016 THE UNIVERSITY OF TEXAS RIO GRANDE VALLEY LASER SAFETY MANUAL August 2016 Table of Contents A. Introduction 4 B. Definitions 5 C. Applicability of 25 TAC 289.301 8 D. Responsibilities 1. Laser Safety Officer

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 13 Sensor SERIES Related Information General terms and conditions... F-17 About laser beam... P.13~ Sensor selection guide... P.967~ General precautions... P.1 PHOTO PHOTO Conforming to EMC Directive Conforming

More information

Annex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems

Annex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems Annex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems 1 st Edition, November 2009 www.celma.org www.elcfed.org Document CELMA LED(FR)003A TABLE

More information

TEST REPORT IEC MEDICAL ELECTRICAL EQUIPMENT

TEST REPORT IEC MEDICAL ELECTRICAL EQUIPMENT Test Report issued under the responsibility of: TEST REORT MEDICAL ELECTRICAL EQUIMENT art 1-11: General requirements for basic safety and essential performance Collateral Standard: Requirements for medical

More information

American National Standard

American National Standard ANSI Z136.5 2009 American National Standard American National Standard for Safe Use of Lasers in Educational Institutions Contents SECTION PAGE 1. General...1 1.1 Scope...1 1.2 Purpose...1 2. Definitions...4

More information

Basic Laser Safety Training

Basic Laser Safety Training The University of Dayton Research Institute Basic Laser Safety Training Created by: john.murphy@udri.udayton.edu L.A.S.E.R. is the acronym for LIGHT AMPLIFICATION BY STIMULATED EMISSION OF RADIATION Introduction

More information

All personnel working in experimental areas at Jefferson Lab must have completed the EH&S Orientation at Jefferson Lab.

All personnel working in experimental areas at Jefferson Lab must have completed the EH&S Orientation at Jefferson Lab. 1. Introduction Room 206A of the Free-electron laser Facility at Jefferson Lab (hereafter referred to as the Drive Laser Enclosure, or DLE) contains a Class IV laser 1 which drives the IR Demo injector

More information

Order code: EQLA21 user manual

Order code: EQLA21 user manual TAURUS Order code: EQLA21 user manual Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and

More information

Report reference No...: 10TH0052_AS4777_+_ISR_3 Tested by (printed name and signature)...: Urs Seifert. Approved by (printed name and signature)...

Report reference No...: 10TH0052_AS4777_+_ISR_3 Tested by (printed name and signature)...: Urs Seifert. Approved by (printed name and signature)... TEST REORT AS 4777.2:2005 and AS 4777.3:2005 with additional deviations for Israel Grid connection of energy systems via inverters Grid protection requirements Report reference No...: 10TH0052_AS4777_+_ISR_3

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 60825-1:2014 Lasertoodete ohutus. Osa 1: Seadmete klassifikatsioon ja nõuded Safety of laser products - Part 1: Equipment classification and requirements EESTI STANDARDI EESSÕNA NATIONAL

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 1129 PHOTO PHOTO PARTICUR Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.193~ guide... P.121~ General precautions... P.19 Conforming to FDA regulations (-11

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60601-2-50 First edition 2000-07 Medical electrical equipment Part 2-50: Particular requirements for the safety of infant phototherapy equipment Appareils électromédicaux Partie

More information

Apollo Intelligent Auto Aligning Beam Detector. User Guide

Apollo Intelligent Auto Aligning Beam Detector. User Guide Apollo Intelligent Auto Aligning Beam Detector User Guide EN 1. General Information 50cm 50cm 8-100m Ensure clear line of sight from Detector to Reflector Mount on solid surfaces (structural wall or girder)

More information

Diode-Pumped Solid-State Blue Lasers

Diode-Pumped Solid-State Blue Lasers Diode-Pumped Solid-State Blue s 58 BLD Series 58 BSD Series Our diode-pumped solid-state blue lasers provide high power output in a compact air-cooled package. They are ideal for use in semiconductor,

More information

Laser Safety Program Manual

Laser Safety Program Manual Laser Safety Program Manual Environmental Health and Safety University of Maryland, Baltimore Introduction The University of Maryland, Baltimore (UMB) Laser Safety Program Manual sets forth controls and

More information

OWNERS MANUAL OPERATION GUIDE

OWNERS MANUAL OPERATION GUIDE OWNERS MANUAL OPERATION GUIDE Built in Redmond Oregon USA www.laserlinemfg.com P/N 1700-0041 REV. 7.24.17 PRODUCT OVERVIEW The GL1700 Laser Guide was designed from the ground up to provide precise start-stop

More information

SYRACUSE UNIVERSITY S LASER SAFETY PROGRAM

SYRACUSE UNIVERSITY S LASER SAFETY PROGRAM SYRACUSE UNIVERSITY S LASER SAFETY PROGRAM Syracuse University s Laser Safety Program provides guidelines for ensuring compliance with applicable regulations and standards of care. The program is established

More information

Laser Safety for Laboratory Users

Laser Safety for Laboratory Users Laser Safety for Laboratory Users Dr Mike Green D Phil (Oxon) F Inst P Member of BSI EPL/76 laser products, PH2/3 laser eye protection and IEC TC/76 laser products. Pro Laser Consultants Pro Laser Oxford

More information

University of North Florida Laser Safety Manual. Environmental Health and Safety Department

University of North Florida Laser Safety Manual. Environmental Health and Safety Department University of North Florida Laser Safety Manual Environmental Health and Safety Department Table of Contents PURPOSE 3 DEFINITIONS 3 RESPONSIBILITIES 4 REGISTRATION 5 EXPOSURE INCIDENTS 6 PERSONAL PROTECTIVE

More information

IECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements

IECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements ExTR Reference Number...: ExTR Free Reference Number...: 223531 Compiled by + signature (ExTL)...: Reviewed by + signature (ExTL)...: NO/NEM/ExTR12.0018/00 Stig André Norheim Arne Hortman Date of issue...:

More information

Self-Leveling Five-Beam Laser Pointer Model No Instruction Manual

Self-Leveling Five-Beam Laser Pointer Model No Instruction Manual 40-6680 English 5/23/05 9:24 AM Page 1 Self-Leveling Five-Beam Laser Pointer Model No. 40-6680 Instruction Manual Congratulations on your choice of this Self-Leveling Five-Beam Laser Pointer. We suggest

More information

CALIFORNIA INSTITUTE OF TECHNOLOGY LASER SAFETY MANUAL. January, 1998

CALIFORNIA INSTITUTE OF TECHNOLOGY LASER SAFETY MANUAL. January, 1998 CALIFORNIA INSTITUTE OF TECHNOLOGY LASER SAFETY MANUAL January, 1998 A Publication of the Caltech Safety Office 1200 E. California Boulevard Mail Code 25-6 Pasadena, CA 91125 (626) 395-6727 safety@caltech.edu

More information

NX7363JB-BC. Data Sheet R08DS0009EJ0200 Rev.2.00 LASER DIODE. Sep 19, 2010 DESCRIPTION FEATURES

NX7363JB-BC. Data Sheet R08DS0009EJ0200 Rev.2.00 LASER DIODE. Sep 19, 2010 DESCRIPTION FEATURES A Business Partner of Renesas Electronics Corporation. NX7363JB-BC LASER DIODE InGaAsP MQW DC-PBH PULSED LASER DIODE MODULE 1 310 nm OTDR APPLICATION Data Sheet DESCRIPTION The NX7363JB-BC is a 1 310 nm

More information

Consumer Products Services Germany GmbH Türkheim Germany

Consumer Products Services Germany GmbH Türkheim Germany TEST REORT SUMMARY EN 50438 Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks Report reference number... : 11TH0290-EN50438_SUM_2 Date of issue......:

More information

Laser Safety Manual. Environmental Health & Safety Office 500 Summit Avenue Box Arlington, TX Phone Fax

Laser Safety Manual. Environmental Health & Safety Office 500 Summit Avenue Box Arlington, TX Phone Fax THE UNIVERSITY OF TEXAS AT ARLINGTON Laser Safety Manual E & H S Environmental Health & Safety Office 500 Summit Avenue Box 19257 Arlington, TX 76019 Phone 817.272.2185 Fax 817.272.2144 January 2014 Table

More information

INTERNATIONAL STANDARD NORME INTERNATIONALE

INTERNATIONAL STANDARD NORME INTERNATIONALE INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 60825-1 Edition 3.0 2014-05 colour inside GROUP SAFETY PUBLICATION PUBLICATION GROUPÉE DE SÉCURITÉ Safety of laser products Part 1: Equipment classification

More information

This is to certify that the optical output of the: SENSORNET LR-DTS Temperature Sensing System: (Variants Mark 1, Mark 2a and Mark 2b)

This is to certify that the optical output of the: SENSORNET LR-DTS Temperature Sensing System: (Variants Mark 1, Mark 2a and Mark 2b) Optical Services Ltd. This is to certify that the optical output of the: SENSORNET LR-DTS Temperature Sensing System: (Variants Mark 1, Mark 2a and Mark 2b) Meets the requirements stated in IEC 60825-1:2001

More information