M E M O R A N D U M. NFPA 270 First Draft Technical Committee FINAL Ballot Results (F2017)

Size: px

Start display at page:

Download "M E M O R A N D U M. NFPA 270 First Draft Technical Committee FINAL Ballot Results (F2017)"

Randolf Rich
5 years ago
Views:

National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.

1 National Fire Protection Association 1 Batterymarch Park, Quincy, MA Phone: Fax: M E M O R A N D U M TO: FROM: Technical Committee on Fire Tests Kelly Carey, Project Administrator DATE: July 1, 2016 SUBJECT: NFPA 270 First Draft Technical Committee FINAL Ballot Results (F2017) According to the final ballot results, all ballot items received the necessary affirmative votes to pass ballot. 30 Members Eligible to Vote 9 Members Not Returned (Burns, Damant, Dillon, Janssens, Parker, J. Roberts, K. Roberts, Sheppard, Stoliarov) 21 Members Voted Affirmative on All Revisions 0 Members Voted Affirmative with Comment on one or more Revisions 0 Members Voted Negative on one or more Revisions 0 Members Abstained on one or more Revisions The attached report shows the number of affirmative, negative, and abstaining votes as well as the explanation of the vote for each revision. To pass ballot, each revision requires: (1) a simple majority of those eligible to vote and (2) an affirmative vote of 2 /3 of ballots returned. See Sections (c) and of the Regulations Governing the Development of NFPA Standards.

2 First Revision No. 1-NFPA [ Chapter 2 ] Chapter 2 Referenced Publications 2.1 General. The documents or portions thereof listed in this chapter are referenced within this standard and shall be considered part of the requirements of this document. 2.2 NFPA Publications. (Reserved) 2.3 Other Publications ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA ASTM E176, Standard Terminology of Fire Standards, 2010 ae1 2015ae ISO Publications. International Standards Organization, 1 rue de Varembé, Case Postale 56, CH-1211 Genève 20, Switzerland. ISO Central Secretariat, BIBC II, 8, Chemin de Blandonnet, CP 401, 1214 Vernier, Geneva, Switzerland. ISO , Determination of Specific Optical Density by a Single-Chamber Test Plastics Smoke Generation Part 2: Determination of Optical Density by a Single-Chamber Test,, rd edition, ISO 13943, Fire Safety Vocabulary, Other Publications. Merriam-Webster's Collegiate Dictionary, 11th edition, Merriam-Webster, Inc., Springfield, MA, References for Extracts in Mandatory Sections. (Reserved) Submitter Information Verification Submitter Full Name: Tracy Vecchiarelli Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Fri Apr 08 11:18:07 EDT 2016 Committee Statement Committee Statement: Referenced current SDO names, addresses, standard names, numbers, and editions. Response Message: Public Input No. 1-NFPA [Chapter 2] Public Input No. 3-NFPA [Section No. 2.3] Public Input No. 6-NFPA [Section No ] Ballot Results This item has passed ballot 30 Eligible Voters 9 Not Returned 21 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Burns, James A. Damant, Gordon H.

3 Dillon, Scott E. Janssens, Marc L. Parker, Arthur J. Roberts, Kenneth Roberts, Jillian Sheppard, David T. Stoliarov, Stanislav I. Affirmative All Adams, Scott W. Alfawakhiri, Farid Badders, Jr., Barry L. Caldwell, Benjamin H. Davis, Richard J. Davis, Rick D. Fitch, William E. Gann, Richard G. Hirschler, Marcelo M. Hough, Paul A. Koffel, William E. Levchik, Sergei V. Long, Jr., Richard T. Lynch, James Andrew Martell, John Newman, Kathleen A. Savage, Sr., Michael L. Schmeida, Michael Sloan, Dwayne E. Sumathipala, Kuma Van Zeeland, Ineke

4 First Revision No. 2-NFPA [ Section No ] A manometer, pressure sensor (such as a manometer or pressure transducer) with a range of up to 1.5 kpa 5 kpa shall be provided for connection to a to monitor chamber pressure regulator and to a tube in the top of the chamber. and leakage. Submitter Information Verification Submitter Full Name: Tracy Vecchiarelli Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Fri Apr 08 11:20:24 EDT 2016 Committee Statement Committee Statement: Response Message: This section requires an update to reflect modern technology incorporated into smoke density chambers. Manufacturers typically use an electronic pressure transducer where a manometer was used in the past. This update allows for any type of pressure sensor. The language about the location and connection to a pressure regulator is unnecessary, as pressure regulation is covered by the preceding section. Public Input No. 5-NFPA [Section No ] Ballot Results This item has passed ballot 30 Eligible Voters 9 Not Returned 21 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Burns, James A. Damant, Gordon H. Dillon, Scott E. Janssens, Marc L. Parker, Arthur J. Roberts, Kenneth Roberts, Jillian Sheppard, David T. Stoliarov, Stanislav I. Affirmative All Adams, Scott W. Alfawakhiri, Farid Badders, Jr., Barry L. Caldwell, Benjamin H. Davis, Richard J.

5 Davis, Rick D. Fitch, William E. Gann, Richard G. Hirschler, Marcelo M. Hough, Paul A. Koffel, William E. Levchik, Sergei V. Long, Jr., Richard T. Lynch, James Andrew Martell, John Newman, Kathleen A. Savage, Sr., Michael L. Schmeida, Michael Sloan, Dwayne E. Sumathipala, Kuma Van Zeeland, Ineke

6 First Revision No. 3-NFPA [ Chapter E ] Annex E Informational References E.1 Referenced Publications. The documents or portions thereof listed in this annex are referenced within the informational sections of this standard and are not part of the requirements of this document unless also listed in Chapter 2. E.1.1 NFPA Publications. (Reserved) E.1.2 Other Publications. E ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA ASTM D 2843 D2843, Test Method for Density of Smoke from the Burning or Decomposition of Plastics, ASTM D 4100 D4100, Test Method for Gravimetric Determination of Smoke Particulates from Combustion of Plastic Materials, 1982 (reapproved 1989 with editorial change, discontinued withdrawn 1997). ASTM D 5424 D5424, Test Method for Standard Test Method For Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration, Caused by Burning Cables in a Vertical Configuration ASTM E 84 E84, Test Method for Surface Burning Characteristics of Building Materials, b. ASTM E 603 E603, Standard Guide for Room Fire Experiments, ASTM E 662 E662, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials, ASTM E 906/ E906/ E906M, Test Method for Heat and Visible Smoke Release Rates for Materials and Products, ASTM E 1354 E1354, Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter, 2011b ASTM E 1474 E1474, Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter, ASTM E 1537 E1537, Test Method for Fire Testing of Real Scale Upholstered Furniture Items, ASTM E 1590 E1590, Test Method for Fire Testing of Real Scale Mattresses, E British Publications. BSI British Standards, 389 Chiswick High Road, London W4 4AL, United Kingdom. BS 6809, Method of Calibration of Radiometers for Use in Fire Testing, 1987, reaffirmed E ISO Publications. International Organization for Standardization, 1 rue de Varembé, Case Postale 56, CH-1211 Genève 20, Switzerland. ISO Central Secretariat, BIBC II, 8, Chemin de Blandonnet, CP 401, 1214 Vernier, Geneva, Switzerland. ISO , Determination of Specific Optical Density by a Single-Chamber Test Plastics Smoke Generation Part 2: Determination of optical density by a single-chamber test, 3rd edition, ISO , Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions, 1994 (with Cor 1: 1998), Technical Corrigendum 1, ISO , Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method, 1994, Technical Corrigendum 1, 2002.

7 E Articles Other Publications. ASTM Committee E 05.2, Interlaboratory Test Data for the Smoke Chamber Test Method, RR: E , Babrauskas, V. Application of Predictive Smoke Measurements, Journal of Fire and Flammability 12, 1981, pp Bartosic, A. J., and F. J. Rarig. Evaluation of the XP2 Smoke Density Chamber, Symposium on Fire Test Methods Restraints and Smoke, ASTM STP 422, American Society of Testing and Materials, Philadelphia, PA, 1966, p Breden, L. H., and M. Meisters. The Effect of Sample Orientation in the Smoke Chamber, Journal of Fire and Flammability 7, 1976, pp Brenden, J. J. Usefulness of a New Method for Smoke Yield from Species and Panel Products, Forest Products Journal, FPJOA, Vol. 21, 1971, pp Chien, W. P., and J. D. Seader. Prediction of Specific Optical Density for a Smoke Obscuration in an NBS Smoke Density Chamber, Fire Technology, FITCA, Vol. 11, August 1975, pp Cornelissen, A. A. Smoke Release Rates: Modified Smoke Chamber Versus Cone Calorimeter Comparison of Results, Journal of Fire Sciences 10, 1992, pp Gaskill, J. R. Smoke Development in Polymers During Pyrolysis or Combustion, Journal of Fire and Flammability, July 1970, pp Grand, A. F. Defining the Smoke Density Hazard of Plastics, Journal of Fire and Flammability 7, 1976, pp Gross, D., J. J. Loftus, T. G. Lee, and V. E. Gray. Smoke and Gases Produced by Burning Aircraft Interior Materials, NBS Bldg. Sci. Series, BSS 18, U.S. Government Printing Office, Washington, DC, February Gross, D., J. J. Loftus, and A. F. Robertson. Method for Measuring Smoke from Burning Materials, Symposium on Fire Test Methods Restraints and Smoke, ASTM STP 422, American Society for Testing and Materials, Philadelphia, PA, 1966, pp. 166 Hirschler, M. M. Analysis of an Attachment for Use with the National Bureau of Standards Smoke Density Chamber to Enable Measurements of Smoke Obscuration to Be Done at Different Orientations, Fire and Materials 17, 1993, pp Hirschler, M. M. Can Heat Release Really Predict the Flame Spread of Electrical Cables? 2nd International Fire Materials Conference and Exhibition, Crystal City, VA, September 23 24, 1993, pp Hirschler, M. M. Comparison of Smoke Release Data from Full Scale Room Tests with Results in the Cone Calorimeter and the NBS Smoke Chamber, Proc. Interflam 93, Oxford, U.K., March 30 April 1, 1993, Interscience Communications, London, U.K. 1993, pp Hirschler, M. M. How to Measure Smoke Obscuration in a Manner Relevant to Fire Hazard Assessment: Use of Heat Release Calorimetry Test Equipment, Journal of Fire Sciences 9, 1991, pp Lee, T. G. Interlaboratory Evaluation of Smoke Density Chamber, NBS Tech. Note 708, December Lee, T. G. The Smoke Density Chamber Method for Evaluating the Potential Smoke Generation of Materials, NBS Tech. Note 757, January Quintiere, J. G. Smoke Measurements: An Assessment of Correlations Between Laboratory and Full-Scale Experiments, Fire and Materials 6, 1982, pp E.2 Informational References. (Reserved) E.3 References for Extracts. (Reserved) Submitter Information Verification Submitter Full Name: Tracy Vecchiarelli Organization: [ Not Specified ] Street Address: City: State: Zip: Submittal Date: Fri Apr 08 11:20:47 EDT 2016 Committee Statement Committee Statement: Referenced current SDO names, addresses, standard names, numbers, and editions. Response Message: Public Input No. 2-NFPA [Chapter E] Public Input No. 4-NFPA [Section No. E.1.2.1] Public Input No. 7-NFPA [Section No. E.1.2.1] Ballot Results This item has passed ballot

8 30 Eligible Voters 9 Not Returned 21 Affirmative All 0 Affirmative with Comments 0 Negative with Comments 0 Abstention Not Returned Burns, James A. Damant, Gordon H. Dillon, Scott E. Janssens, Marc L. Parker, Arthur J. Roberts, Kenneth Roberts, Jillian Sheppard, David T. Stoliarov, Stanislav I. Affirmative All Adams, Scott W. Alfawakhiri, Farid Badders, Jr., Barry L. Caldwell, Benjamin H. Davis, Richard J. Davis, Rick D. Fitch, William E. Gann, Richard G. Hirschler, Marcelo M. Hough, Paul A. Koffel, William E. Levchik, Sergei V. Long, Jr., Richard T. Lynch, James Andrew Martell, John Newman, Kathleen A. Savage, Sr., Michael L. Schmeida, Michael Sloan, Dwayne E. Sumathipala, Kuma Van Zeeland, Ineke

NFPA Technical Committee on Fire Tests FALL 2011 ROC MEETING MINUTES

National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org NFPA Technical Committee on Fire Tests FALL 2011 ROC MEETING MINUTES 1.