ISO NORMAS PUBLICADAS

Transcription

1 ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC : Information technology - Sensor networks: Sensor Network Reference Architecture (SNRA) - Part 7: Interoperability guidelines. ISO/IEC : Information technology - Device control and management - Part 2: Specification of Device Control and Management Protocol. ISO/IEC 33001: Information technology - Process assessment - Concepts and terminology. ISO/IEC 33002: Information technology - Process assessment - Requirements for performing process assessment. ISO/IEC 33004: Information technology - Process assessment - Requirements for process reference, process assessment and maturity models. ISO/IEC 33020: Information technology - Process assessment - Process measurement framework for assessment of process capability. ISO/IEC 33003: Information technology - Process assessment - Requirements for process measurement frameworks. ISO/IEC TS : Information Technology - Programming languages, their environments, and system software interfaces - Floating-point extensions for C - Part 2: Decimal floating-point arithmetic. ISO/IEC 27039: Information technology - Security techniques - Selection, deployment and operations of intrusion detection systems (IDPS). ISO/IEC :2004/Cor 3: Information technology - JPEG 2000 image coding system: Core coding system ISO/IEC 18004: Information technology - Automatic identification and data capture techniques - QR Code bar code symbology specification. ISO/IEC : Information technology - Radio frequency identification for item management - Part 4: Parameters for air interface communications at 2,45 GHz. ISO/IEC 38500: Information technology - Governance of IT for the organization. ISO/IEC TR : Information technology - Service management - Part 9: Guidance on the application of ISO/IEC to cloud services. ISO/TC 10 - Technical product documentation ISO : Technical product documentation - Lettering - Part 1: General requirements.

2 ISO/TS : Industrial systems, installations and equipment and industrial products - Structuring principles and reference designation - Part 10: Power plants. ISO/TC 20 - Aircraft and space vehicles ISO : Aerospace series - Hydraulic filter elements - Test methods - Part 1: Test sequence. ISO : Aerospace series - Hydraulic filter elements - Test methods - Part 4: Verification of collapse/burst pressure rating. ISO : Aerospace series - Hydraulic filter elements - Test methods - Part 2: Conditioning. ISO : Aerospace series - Hydraulic filter elements - Test methods - Part 5: Resistance to flow fatigue. ISO : Aerospace series - Hydraulic filter elements - Test methods - Part 3: Filtration efficiency and retention capacity. ISO : Aerospace series - Hydraulic filter elements - Test methods - Part 6: Initial cleanliness level. ISO/TC 21 - Equipment for fire protection and fire fighting ISO : Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant. ISO : Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant. ISO : Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant. ISO/TC 24 - Particle characterization including sieving ISO 27891: Aerosol particle number concentration - Calibration of condensation particle counters. ISO/ TC 28 - Petroleum products and related products of synthetic or biological origin ISO 3679: Determination of flash no-flash and flash point - Rapid equilibrium closed cup method.

3 ISO/TC 29 - Small tools ISO : Assembly tools for screws and nuts - Technical specifications - Part 1: Handoperated wrenches and sockets. ISO : Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets (impact). ISO/TC 39 - Machine tools ISO : Test conditions for numerically controlled turning machines and turning centres - Part 5: Accuracy of speeds and interpolations. ISO 14137: Test conditions for wire electrical-discharge machines (wire EDM) - Testing of the accuracy. ISO/TC 44 - Welding and allied processes ISO 23278: Non-destructive testing of welds - Magnetic particle testing - Acceptance levels. ISO 5175:1987/Amd 1:2015 Equipment used in gas welding, cutting and allied processes - Safety devices for fuel gases and oxygen or compressed air - General specifications, requirements and tests. ISO/TC 45 - Rubber and rubber products ISO 1823: Rubber hose and hose assemblies for oil suction and discharge service - Specification. ISO 28017:2011/Amd 1: Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications Specification. ISO 1817: Rubber, vulcanized or thermoplastic - Determination of the effect of liquids. ISO 23794: Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance. ISO/TC 59 - Buildings and civil engineering works ISO 16745: Environmental performance of buildings - Carbon metric of a building - Use stage. ISO/TC 61 - Plastics

4 ISO : Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications. ISO : Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications. ISO/TC 72 - Textile machinery and accessories ISO 93-1:2006/Amd 1: Textile machinery and accessories - Cylindrical sliver cans - Part 1: Main dimensions. ISO/TC 76 - Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use ISO : Containers and accessories for pharmaceutical preparations - Part 5: Dropper assemblies. ISO/TC 85 - Nuclear energy, nuclear technologies, and radiological protection ISO : Measurement of radioactivity in the environment - Soil - Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry. ISO 15651: Nuclear energy - Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets - Inert gas extraction and conductivity detection method. ISO/TC Metallic and other inorganic coatings ISO 4528: Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles. ISO/TC Small craft ISO : Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements. ISO : Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2: Non-integrally geared centrifugal and axial compressors. ISO : Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 3: Integrally geared centrifugal compressors. ISO : Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors.

5 ISO/TC Leather ISO 14931: Leather - Guide to the selection of leather for apparel (excluding furs). ISO/TC Anaesthetic and respiratory equipment IEC :2009/Cor 1: Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use. IEC :2009/Cor 2: Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use. ISO/TC Plastics pipes, fittings and valves for the transport of fluids ISO 13845: Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection. ISO 13844: Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation. ISO 3459: Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure. ISO 3503: Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending. ISO/TC Cleaning equipment for air and other gases ISO 15957: Test dusts for evaluating air cleaning equipment. ISO/TC Non-systemic contraceptives and STI barrier prophylactics ISO 7439: Copper-bearing contraceptive intrauterine devices - Requirements and tests. ISO/TC Analysis of gases ISO 6141: Gas analysis - Contents of certificates for calibration gas mixtures.

6 ISO 19229: Gas analysis - Purity analysis and the treatment of purity data. ISO/TC Mechanical testing of metals ISO : Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters. ISO : Metallic materials - Rockwell hardness test - Part 1: Test method. ISO : Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks. ISO/TC Document management applications ISO : Document management - Strategy markup language (StratML) -- Part 1: StratML core elements. ISO/TC Optics and photonics ISO : Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity. ISO : Optics and photonics - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide. ISO : Optics and photonics - Environmental test methods - Part 3: Mechanical stress. ISO : Optics and photonics - Environmental test methods - Part 6: Dust. ISO : Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain. ISO : Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, immersion. ISO/TC Gas turbines ISO 19372: Microturbines applications - Safety. ISO/TC Quality management and corresponding general aspects for medical devices IEC : Medical devices - Part 1: Application of usability engineering to medical devices.

7 ISO/TC Tourism and related services ISO 18065: Tourism and related services - Tourist services for public use provided by Natural Protected Areas Authorities - Requirements. ISO/TC Solid biofuels ISO 16995: Solid biofuels - Determination of the water soluble chloride, sodium and potassium content. ISO/TC Industrial furnaces and associated processing equipment ISO 13574: Industrial furnaces and associated processing equipment - Vocabulary. IIW/IIW - International Institute of Welding ISO 10447: Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds. ISO 14323:2015- Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds. ISO/REMCO - Committee on reference materials ISO Guide 30: Reference materials - Selected terms and definitions. ISO Guide 33: Reference materials - Good practice in using reference materials. IULTCS/IULTCS - International Union of Leather Technologists and Chemists Societies ISO 17228:2015 (IULTCS/IUF 412) - Leather - Tests for colour fastness - Change in colour with accelerated ageing. ISO 17070:2015 (IULTCS/IUC 25) - Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content.