Adjustable Range Reflective Photoelectric Sensor. General terms and conditions... F-17 Glossary of terms / General precautions...p.1359~ / P.

Size: px
Start display at page:

Download "Adjustable Range Reflective Photoelectric Sensor. General terms and conditions... F-17 Glossary of terms / General precautions...p.1359~ / P."

Transcription

1 69 Adjustable Range Reflective Photoelectric EQ-5 SERIES Related Information General terms and conditions... F-7 Glossary of terms / General precautions...p.59~ / P.5 Multi-voltage selection guide... P.8~ China s CCC mark... P.9 PHOO PHOO OPIS Conforming to ow Voltage and EMC Directive DC-voltage type conforms to EMC directive only ( ) Certified (Multi-voltege type only) Recognition MEASUREMEN CRO panasonic-electric-works.net/sunx ong range sensing capability to.5 m 8. ft Stable sensing unaffected by color or gloss CSUMPI VISUAIZAI COMPENS COMPENS VISI ong sensing range An adjustable range to.5 m 8. ft allows plenty of space for installation. m.8 ft sensing range type also available. Adjust the volume easily to suit your needs when using at close range. Hardly affected by background objects Because the sensor doesn t detect objects outside the preset sensing field by using the -segment photodiode adjustable range system, it will not malfunction even if someone walks behind the sensing object or machines or conveyors are in the background. Note: Please note that malfunction may occur when there are specular objects or objects with a mirror-like surface in the background. Refer to the PRECAUIS FOR PROPER section. Impervious to variations color or angle he optical system has been optimized. Since the sensor is hardly influenced at all by angles or the gloss of objects compared to the previous model, it is possible to detect both white objects and black objects at almost a constant distance. he difference in sensing range between and gray non-glossy (lightness: 5) is approx 5% when set at a distance of m 6.56 ft. CX- EX- EX- EX- EX- CX- EQ- EQ-5 -S R-6 MOUNING Convenient terminal block type Cabling enabled by way of a terminal block that eliminates waste. erminal block Conduit connector OPERABIIY An easy to set adjuster with indicator Equipped with a -turn adjuster with indicator, making it easy to set for short or long distances. Distance adjuster (-turn) -delay timer adjuster (Note) Adjuster indicator -delay timer adjuster (Note) Note: For EQ-5 only. Ramco Innovations

2 Adjustable Range Reflective Photoelectric EQ-5 SERIES 7 APPICAIS evel check within the hopper he distance to the object can be set to enable residual amount sensing in the hopper regardless of color. Confirmation of the passage of packages on a conveyor belt Can accurately detect packages even if they vary in size and color. PHOO PHOO VARIEIES Equipped with both NPN and PNP outputs EQ-5 We ve added a DC-voltage type with NPN and PNP transistor outputs all in one sensor. Its BGS / FGS function controls any background effects f stable sensing. FUNCIS Multi-voltage EQ-5 Because it can function with to V AC and to V DC, almost any power supply anywhere in the world will do. Convenient timer function models ypes with an -delay / -delay timer available. -delay, e.g. useful when the response of the connected device is slow, -delay, e.g. useful to detect objects that take a long time to move. BGS / FGS functions make even the most challenging settings possible! he BGS function is best suited for background not present Background Moving object in the back ight received at element B or light not received When object and background are separated BGS (Background suppression) function he sensor judges that an object is present when light is received at position A of the light-receiving element (-segment element). his is useful if the object and background are far apart. Not affected if the background color changes or someone passes behind the conveyor. Object Setting distance ight received at element A Element A Element B Operation: -delay, -delay imer period:. to 5 sec. (individual setting possible) in this condition only Element A Element B ens Object absent Emitting element Conveyor ight received at element B A conveyor or other background must be present. When object and background are close together When the object is glossy or uneven FGS (Foreground suppression) function he sensor judges that no object is present when light is received at position B of the light receiving element (-segment element) (he conveyor is detected). his function is useful if the object and the background are close together or if the object is glossy or uneven. However, sensing is impossible if there is no background (conveyor, etc.). Object present Conveyor ight received at element A Note: Refer to BGS / FGS function of PRECAUIS FOR PROPER for operation of BGS / FGS function. in all other conditions For glossy object EQ-5 he FGS function is best suited for background present Setting distance Conveyor ight is not received at element B, so an object is judged to be present Ramco Innovations OPIS MEASUREMEN CRO CSUMPI VISUAIZAI COMPENS COMPENS VISI CX- EX- EX- EX- EX- CX- EQ- EQ-5 -S R-6

3 7 Adjustable Range Reflective Photoelectric EQ-5 SERIES ENVIRMENA RESISANCE ittle affected by contamination on lens Even if the lens surface gets somewhat dirty from dust particles, there is very little change in the operation field, by usage adjustable range system. ORDER GUIDE Waterproof IP67 protection permits use in environments where water may splash. Note: However, take care that if it is exposed to water splashes during operation, it may detect a water drop itself. OPIS ype Appearance Sensing range Model No. Supply voltage Output imer function MEN CRO Multi-voltage With timer With timer. to. m.8 to.8 ft. to.5 m.8 to 8. ft EQ-5 EQ-5 to V AC ± % or to V DC ± % Relay contact a -delay / -delay timer (imer period:. to 5 sec.) EQ-5 EQ-5 -delay / -delay timer (imer period:. to 5 sec.) CSUMPI VISUAIZAI COMPENS COMPENS VISI DC-voltage With timer With timer. to. m.8 to.8 ft. to.5 m.8 to 8. ft EQ-5 EQ-5 NPN open-collector transistor -delay / -delay timer (imer period:. to 5 sec.) to V DC PNP ± % open-collector EQ-5 transistor Equipped with outputs EQ-5 -delay / -delay timer (imer period:. to 5 sec.) OPI Designation Model No. Description mounting bracket MS-EQ5- CX- mounting bracket MS-EQ5- Foot / back angled mounting bracket EX- EX- EX- EX- wo M5 (length mm.8 in) screws with washers and two nuts are attached. CX- EQ- EQ-5 -S R-6 Ramco Innovations

4 Adjustable Range Reflective Photoelectric EQ-5 SERIES 7 ype Multi-voltage DC-voltage With timer With timer With timer With timer Item Model No. EQ-5 EQ-5 EQ-5 EQ-5 EQ-5 EQ-5 EQ-5 EQ-5 Adjustable range (Note,). to.5 m.656 to 8. ft. to. m.656 to.8 ft. to.5 m.656 to 8. ft. to. m.656 to.8 ft Sensing range (at max. setting distance) (Note ). to.5 m.8 to 8. ft. to. m.8 to.8 ft. to.5 m.8 to 8. ft. to. m.8 to.8 ft Hysteresis (Note ) % of operation distance Supply voltage to V AC ± % or to V DC ± % Ripple P-P % to V DC ± % Ripple P-P % Power / Current consumption Output SPECIFICAIS Output operation AC: VA DC: W AC: 5 VA DC: W AC: VA DC: W AC: 5 VA DC: W Relay contact a Switching capacity: 5 V AC A (resistive load) V DC A (resistive load) Electrical life:, switching operations (switching frequency, operations/hour) Mechanical life: 5 million switching operations (switching frequency 8, operations/hour) Switchable either Detection- or Detection- 5 ma NPN open-collector transistor Maximum sink current: ma Applied voltage: V DC (between output and V) Residual voltage: V (at ma sink current). V (at 6 ma sink current) PNP open-collector transistor Maximum source current: ma Applied voltage: V DC (between output and +V) Residual voltage: V (at ma source current). V (at 6 ma source current) Short-circuit protection Incorporated Response time ms (For EQ-5 depends on the setting timer period) ms (For EQ-5 depends on the setting timer period) Operation indicator Stability indicator Distance adjuster Orange ED (lights up when the output is ) Green ED (lights up under stable operating condition) -turn mechanical adjuster with indicator Sensing mode Switchable either BGS or FGS function imer function Incorporated with variable (. to 5 sec.) -delay / -delay timer Incorporated with variable (. to 5 sec.) -delay / -delay timer Automatic interference prevention function Incorporated (Note ) Protection IP67 (IEC) Incorporated with variable (. to 5 sec.) -delay / -delay timer Incorporated with variable (. to 5 sec.) -delay / -delay timer OPIS MEN CRO CSUMPI VISUAIZAI COMPENS COMPENS Environmental resistance Ambient temperature to +55 C to + F (No dew condensation or icing allowed), Storage: to +7 C to +58 F Ambient humidity Ambient illuminance Voltage withstandability Insulation resistance Vibration resistance Shock resistance, V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals,, V AC for one min. between relay contacts MΩ,, with 5 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts 5 to 85 % RH, Storage: 5 to 85 % RH Incandescent light:, lx at the light-receiving face, V AC for one min. between all supply terminals connected together and enclosure MΩ,, with 5 V DC megger between all supply terminals connected together and enclosure to 55 Hz frequency,.5 mm.59 in amplitude in X, Y and Z directions for two hours each 5 m/s acceleration (5 G approx.) in X, Y and Z directions for three times each VISI Emitting element Receiving element Material Connection method Cable Cable length Infrared ED (Peak emission wavelength: 855 nm. mil, modulated) -segment photodiode Enclosure: ABS, Front cover: Polycarbonate, Display cover: Polycarbonate Screw-on terminal connection Suitable for round cable ø9 to ø mm ø.5 to ø. in otal length up to m 8.8 ft is possible with. mm,, cabtyre cable. Weight Net weight: g approx. Net weight: 85 g approx. Accessory Adjusting screwdriver: pc. Notes: ) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of + C +7. F. ) he adjustable range stands for the maximum sensing range which can be set with the distance adjuster. he sensor can also detect an object. m.8 ft,, away. ) he adjustable range, sensing range and hysteresis are specified for ( mm in) as the object. ) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. Refer to Automatic interference function of PRECAUIS FOR PROPER for details. CX- EX- EX- EX- EX- CX- EQ- EQ-5 -S R-6 Ramco Innovations

5 7 Adjustable Range Reflective Photoelectric EQ-5 SERIES I/O CIRCUI AND WIRING DIAGRAMS EQ-5() EQ-5() I/O circuit diagram circuit Multi-voltage circuit Output relay erminal No. Supply voltage to V AC ± % or to V DC ± % Relay contact output (a) erminal arrangement diagram Internal circuit OPIS MEN CRO EQ-5() EQ-5() I/O circuit diagram circuit D r r Internal circuit ZD ZD erminal No. +V Output (PNP) Output (NPN) V ma max. ma max. Users circuit oad oad + to V DC ± % erminal arrangement diagram CSUMPI VISUAIZAI COMPENS COMPENS VISI CX- EX- EX- EX- EX- CX- EQ- EQ-5 -S R-6 SENSING CHARACERISICS (YPICA) EQ-5() EQ-5() Sensing fields Setting distance: m.8 ft Setting distance (m ft) mm in Non-glossy l Gray non-glossy ightness: eft Center Right Operating point l (mm in).787 Setting distance (m ft) Setting distance:.5 m 8. ft l Gray non-glossy ightness: 5 mm in Non-glossy.9.9 eft Center Right Operating point l (mm in).787 Correlation between color ( mm in non-glossy ) and sensing range Emitted beam Sensing range (m ft) Symbols... D: Reverse supply polarity protection diode ZD, ZD: Surge absorption zener diode r: NPN output transistor r: PNP output transistor White Yellow Orange Red Brown Green Blue Gray (ightness: 8) Gray (ightness: 5) hese bars indicate the sensing range with the respective colors when the distance adjuster is set to a sensing range of.5 m 8. ft / m.8 ft long, respectively, with. he sensing range also varies depending on material..5 m 8. ft m.8 ft Distance (m ft) Correlation between material ( mm in) and sensing range Sensing range (m ft) ø7 mm ø.756 in ø56 mm ø.5 in ø mm ø.65 in ø6 mm ø. in ø mm ø.787 in Gray non-grossy (ightness: 5) Cardboard Plywood Black rubber.5 m 8. ft m.8 ft hese bars indicate the sensing range with the respective objects when the distance adjuster is set to a sensing range of.5 m 8. ft / m.8 ft long, respectively, with. Correlation between sensing object size and sensing range Sensing range (m ft).8 Setting distance:.5 m 8. ft White non-glossy White non-glossy side length a (mm in) his curve shows the characteristics with the maximum sensing range set to.5 m 8. ft, with white non-glossy ( mm in) Ramco Innovations

6 Adjustable Range Reflective Photoelectric EQ-5 SERIES 7 SENSING CHARACERISICS (YPICA) EQ-5 () EQ-5 () Sensing fields Setting distance:.5 m.6 ft Setting distance (m ft) Sensing range (m ft) Gray non-glossy ightness: 5 mm in Non-glossy.9.9 eft Center Right Operating point l (mm in) l.787 Setting distance (m ft) Setting distance: m.8 ft mm in Non-glossy l Gray non-glossy ightness: eft Center Right Operating point l (mm in) Correlation between material ( mm in) and sensing range Sensing range (m ft) Gray non-grossy (ightness: 5) Cardboard Plywood Black rubber m.8 ft.5 m.6 ft hese bars indicate the sensing range with the respective objects when the distance adjuster is set to a sensing range of m.8 ft /.5 m.6 ft long, respectively, with. Correlation between color ( mm in non-glossy ) and sensing range Emitted beam Correlation between sensing object size and sensing range White Yellow Orange Red Brown Green Blue Gray (ightness: 8) Gray (ightness: 5) hese bars indicate the sensing range with the respective colors when the distance adjuster is set to a sensing range of m.8 ft /.5 m.6 ft long, respectively, with. he sensing range also varies depending on material. m.8 ft.5 m.6 ft Distance (m ft) PRECAUIS FOR PROPER Mounting he tightening torque should be.8 N m. Care must be taken regarding the sensor mounting direction with respect to the object s direction of movement. Sensing object Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. M5 nut M5 (length mm.8 in) screw with washers mounting blacket MS-EQ5- (Optional) Correct Correct Incorrect Sensing object Sensing object Do not make the sensor detect an object in this direction because it may cause unstable operation. When detecting a specular object (aluminum or copper foil, etc.) or an object having a glossy surface or coating, please note that there are cases when the object may not be detected due to a change in angle, wrinkles on the object surface, etc. If a specular body is present in the background, faulty operation may be caused due to a small change in the angle of the background body. In that case, install the sensor at an inclination and confirm the operation with the actual sensing object. ø6 mm ø. in ø mm ø.787 in Sensing range (m ft) Setting distance: m.8 ft White non-glossy side length a (mm in) his curve shows the characteristics with the maximum sensing range set to m.8 ft, with ( mm in) Refer to General precautions. When a specular body is present below the sensor, use the sensor by tilting it slightly upwards to avoid faulty operation. Specular face Specular face his product is not easily affected by the reflected light intensity since this sensor is the adjustable range reflective type. When the reflected light intensity is remarkably low, the sensing range may be affected. In that case, mount the sensor, while checking light-up of the stable indicator (green). he mounting screws of the terminal cover and display cover should certainly be tightened to maintain water-resistance; the tightening torque of the screws should be. to.5 N m. Automatic interference prevention function Setting distance (m ft) When the sensors are mounted closely, use them in the interference prevented area, as shown below Incorrect mm in Interference prevented area Mounting interval (mm in) 8.5 mm in Correct mm in mm in Setting distance (m ft) ilt Interference prevented area Mounting interval (mm in) Note that the detection may be unstable depending on the mounting conditions or the sensing object to be used. In the state that this product is mounted, be sure to check the operation with the actual sensing object to be used. Ramco Innovations OPIS MEN CRO CSUMPI VISUAIZAI COMPENS COMPENS VISI CX- EX- EX- EX- EX- CX- EQ- EQ-5 -S R-6

7 75 Adjustable Range Reflective Photoelectric EQ-5 SERIES PRECAUIS FOR PROPER Refer to General precautions. OPIS MEN CRO CSUMPI VISUAIZAI COMPENS COMPENS VISI Wiring Check all wiring before applying power since incorrect wiring may damage the internal circuit. Also, carefully tighten the terminal screws so that the wires of adjacent terminals do not touch. he mounting hole for the terminal cover fixing screws inclines 7 degrees to the terminal cover, as shown in the figure below. o avoid damaging this product or screw, take care when tightening or loosening a screw. o maintain water-resistance, the cable should have an outer diameter between ø9 to ø mm ø.5 to ø. in with a smooth covering material that allows the attached conduit connector to be securely tightened; the tightening torque of the screw should be of.5 to. N m. If an external surge voltage exceeding kv is impressed (DC-voltage type: kv), the internal circuit will be damaged, and a surge suppressing element should be used. Prepare the cable end as shown below. Dimensions of the suitable crimp terminals Round type Screw for terminal cover fixing Screwdriver Conduit connector construction and cabling 7 mm.57 in Power supply Conduit connector Output Gland packing (Note) Gland 5 mm.98 in Note: When assembling the conduit connector, pay attention to the direction of the gland packing. Furthermore, in order to maintain water-resistance, fit the gland packing such that the seating surface of the gland packing contacts the packing holder part of the terminal cover evenly. he size of conduit is M.5 mm.787 in. If pressure terminals are to be used, affix the connected pressure terminals to a terminal (M.5 screw). Y-shaped type (Unit: mm in) Part description Stability indicator (Green) Distance adjuster (-turn) Adjuster indicator -delay timer adjuster (Note ) Operation indicator (Orange) Operation mode switch (Note ) Notes: ) he operation mode switch of the DC-voltage type is the DIP switch. Refer to DC-voltage type of Operation mode switch for details. ) Incorporated on EQ-5 only. Operation mode switch Multi-voltage type (- / D- mode only) Operation mode switch Note: urn the operation mode switch gradually and lightly with the attached screwdriver. urning with excessive strength will cause damage to the adjuster. DC-voltage type - / D- mode BGS / FGS mode imer mode Not used -delay timer adjuster (Note ) Description Detection- mode is obtained when the switch is turned fully clockwise ( side). Detection- mode is obtained when the switch is turned fully counterclockwise (D side). BGS N.C. D FGS imer N.C. BGS / FGS function (DC-voltage type only) DC-voltage type sensor incorporates BGS / FGS function. Select either the BGS or FGS function depending on the positions of the background and sensing object. BGS / FGS function is set with the operation mode switch. FGS function is used when the sensing object contacts the background (conveyor, etc). Depends on a selection of either BGS or FGS function, the output operation changes as follows. Detectable range CX- EX- EX- EX- EX- CX- EQ- EQ-5 -S ø.6 ø (After crimping) (After crimping) Note: Use crimp terminals with insulating sleeves. Recommended crimp terminal: Nominal size he tightening torque for the terminal screws should be. to.5 N m. BGS FGS Non-detectable area - D- - D- Setting distance R-6 Ramco Innovations

8 Adjustable Range Reflective Photoelectric EQ-5 SERIES 76 PRECAUIS FOR PROPER Refer to General precautions. imer function (EQ-5 only) EQ-5 incorporates an -delay timer, which is useful when the response of the connected device is slow, etc., and an -delay timer, which is useful for detecting objects that move slowly, for example. he -delay and -delay timers can be used simultaneously. For DC-voltage type, set the DIP switch for the timer mode to imer side. ime chart Operation Detection normal operation Detection -delay Detection -delay DIMENSIS (Unit: mm in) EQ-5() EQ-5() EQ-5() EQ-5() Beamreceiving part Center of beamemitting (Center of sensing) Sensing condition Detection / -delay Non-detection normal operation Non-detection -delay Non-detection -delay Non-detection / -delay Stability indicator (Green) Operation mode switch (Note ) Distance adjuster (-turn) -delay timer adjuster (Note ) Adjuster indicator Operation indicator (Orange) M5 nut seats (on both sides) delay timer adjuster (Note ) ø5. ø. mounting holes Notes: ) he operation mode switch of the DC-voltage type is the DIP switch. ) For EQ-5 only. Detection Nondetection imer period: =. to 5 sec. (variable) Stability indicator Since the EQ-5 series uses a -segment photodiode as its receiving element, and sensing is done based on the difference in the incident beam angle of the reflected beam from the sensing object, the output and the operation indicator (orange) operate according to the object distance. Furthermore, the stability indicator (green) shows the margin of the setting distance. Output (Operation indicator) (In case of Detection-) Stability indicator Setting distance Stable operating condition Sensing object Stable operating condition Unstable operating condition (ights up) (ights off) ights up ights off Others Do not use during the initial transient time (5 ms) after the power supply is switched on. Its distance adjuster is mechanically operated. Do not drop; avoid other shocks. he CAD data in the dimensions can be downloaded from our website. Assembly dimensions with sensor mounting bracket MS-EQ5- (Optional) (Foot angled mounting) Center of beamemitting (Center of sensing) ø ø () ().8 (.9) (.9) -M5 (length.8) screws t 78 t.79.7 Material: Cold rolled carbon steel (SPCC) wo M5 (length mm.8 in) screws with washers and two nuts are attached. (.5) (.) OPIS MEN CRO CSUMPI VISUAIZAI COMPENS COMPENS VISI CX- EX- EX- EX- EX- CX- EQ- EQ-5 -S R-6 Ramco Innovations

Adjustable Range Reflective Photoelectric Sensor. panasonic.net/id/pidsx/global

Adjustable Range Reflective Photoelectric Sensor. panasonic.net/id/pidsx/global 9 Adjustable Range Reflective Photoelectric EQ-5 SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ Multi-voltage guide... P.~ China s

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 1129 PHOTO PHOTO PARTICUR Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.193~ guide... P.121~ General precautions... P.19 Conforming to FDA regulations (-11

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 13 Sensor SERIES Related Information General terms and conditions... F-17 About laser beam... P.13~ Sensor selection guide... P.967~ General precautions... P.1 PHOTO PHOTO Conforming to EMC Directive Conforming

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 113 Sensor SERIES Related Information General terms and conditions... F-7 About laser beam... P.199~ Sensor selection guide... P.1~ General precautions... P.11 PHOTO PHOTO PARTICUR MEASURE ITY panasonic.net/id/pidsx/global

More information

panasonic.net/id/pidsx/global Gentle start-up switches in accordance with ergonomics Reduces load on hands and fingers

panasonic.net/id/pidsx/global Gentle start-up switches in accordance with ergonomics Reduces load on hands and fingers 687 Optical Touch Switch SW-1 SERIES Related Information General terms and conditions... F-3 General precautions... P.1595 PHOTO PHOTO Conforming to OSHA / ANSI Listing MEASURE panasonic.net/id/pidsx/global

More information

ER-TF SERIES. Wide-area Ionizer Steady-state DC Method. Slim in shape, Wide in charge removal area, An evolutionary form in expression.

ER-TF SERIES. Wide-area Ionizer Steady-state DC Method. Slim in shape, Wide in charge removal area, An evolutionary form in expression. 117 Wide-area Ionizer Steady-state DC Method SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.191 No compressed air necessary guide... P.11~ General precautions...

More information

10 to 30 VDC Diffuse 40 mm ±10 mm NPN and PNP, switch-selectable

10 to 30 VDC Diffuse 40 mm ±10 mm NPN and PNP, switch-selectable R Label Detection Sensor E3S-CD68/63 Detect Labels Regardless of Label Color or Luster, Bottle Color or Clarity H High-performance circuitry detects wide variety of labels on clear and colored bottles

More information

Contents. Photoelectric Sensors / Standard Sensors...4. Safety Sensors Photoelectric Sensors / Miniature Sensors... 12

Contents. Photoelectric Sensors / Standard Sensors...4. Safety Sensors Photoelectric Sensors / Miniature Sensors... 12 SHORT FORM SENSORS A new performance class of innovative sensor technology The delivery program: innovative and extensive. Besides throughbeam and retro reflective types, reflective sensors and optical

More information

E3M-V. Mark Sensor. Applications

E3M-V. Mark Sensor. Applications Mark Sensor Detects laminated or light-dispersing objects in stable operation without being influenced by mirror reflection. Double indication of the detection level and threshold level allows easy grasp

More information

Color Mark Sensor. Sensing gdsa distance Spot diameter e. Possible to switch between vertical or horizontal connection using the M12 rotary connector.

Color Mark Sensor. Sensing gdsa distance Spot diameter e. Possible to switch between vertical or horizontal connection using the M12 rotary connector. Color Mark Sensor Detects laminated or light-dispersing objects in stable operation without being influenced by mirror reflection. Double indication of the detection level and threshold level allows easy

More information

Laser Collimated Beam Sensor

Laser Collimated Beam Sensor SERIES Laser Collimated Beam Sensor Class 1 Laser Beam Sensor Safe for Your Eyes Marked Conforming to EMC Directive (Excluding LA-C1) Safe Laser Beam This laser collimated beam sensor conforms to the Class

More information

pre-wired E3FA-TP11-F2 2M E3FB-TP11-F2 2M

pre-wired E3FA-TP11-F2 2M E3FB-TP11-F2 2M PHOTOELECTRIC SENSORS EFA/B_-F Special family with inverted output logic Fully compatible with previous EF family Simple installation due to compact format Wide variety of models Ordering Information EFA/B

More information

High Reliability Of Fiber Optic Amplifier For Convenient Mounting

High Reliability Of Fiber Optic Amplifier For Convenient Mounting Fiber Optic Amplifier Reliability Of Fiber Optic Amplifier For Convenient Mounting Features speed response: Max. 0.5ms Auto sensitivity setting (Button setting)/remote sensitivity setting External synchronization

More information

Ultrasonic Proximity Sensor

Ultrasonic Proximity Sensor Ultrasonic Proximity Sensor Compact, Column-shaped Sensor Capable of Sensing Range Setting Ensures the stable detection of a variety of objects regardless of the color, transparency, or material (metallic

More information

Retroreflective sensor with polarization filter

Retroreflective sensor with polarization filter Dimensions 45 49 Receiver 27 74 Emitter 92 56 23 6 x 9 slots S 23 25 32 Internal thread (1/2-14 NP) External thread (M30 x 1.5) ø 6 mm Cable 10 Model Number Retroreflective sensor with fixed cable Features

More information

BSF4-AH80. Flameproof Type Light Curtain Type 4. Globally-compliant flameproof structure. Ample protective height 1,595 mm 62.

BSF4-AH80. Flameproof Type Light Curtain Type 4. Globally-compliant flameproof structure. Ample protective height 1,595 mm 62. 637 PHOTO PHOTO Flameproof Type Curtain Type 4 General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Sensor selection guide... P.497~ General precautions... P.1458~ Conforming

More information

onlinecomponents.com

onlinecomponents.com Reflective Mapping CSM DS_E_2_1 Ideal for Mapping Liquid Crystal Glass Plates on Cassette Trays Be sure to read Safety Precautions on page 3. Features Detects glass plates without being influenced by the

More information

Emitter. Emitting circuit. Control circuit. Check. Monitoring section (CPU) Emitting element failure. Emitting circuit failure

Emitter. Emitting circuit. Control circuit. Check. Monitoring section (CPU) Emitting element failure. Emitting circuit failure SF-N SERIES Small Diagnosis Self-diagnosis Test input PNP output type available Type We changed unstable incident beam indicator orange LED) to stable incident beam indicator orange / green LED) from the

More information

Background suppression photo sensors

Background suppression photo sensors DA-S series DX-7 series DL-S series DL series DLA series 327 Unlike the conventional diffuse-reflective type photo sensors that operate based on received light intensity, background suppression photo sensors

More information

Selection guide...p.457~ SF-C13...P.663~ Glossary of terms... P.1549~ General precautions... P panasonic.net/id/pidsx/global

Selection guide...p.457~ SF-C13...P.663~ Glossary of terms... P.1549~ General precautions... P panasonic.net/id/pidsx/global 597 Flameproof Type Light Curtain Type 4 General terms and conditions... F-3 Related Information guide...p.457~ SF-C13...P.663~ Glossary of terms... P.1549~ General precautions... P.1595 PHOTO PHOTO Certified

More information

Flameproof Type Light Curtain Type 4

Flameproof Type Light Curtain Type 4 545 PHOTO PHOTO Flameproof Type Curtain Type 4 Sensor selection guide...p.11~ / P.479~ General terms and conditions... P.1 SF4-AH... P.569 ~ Glossary of terms / General precautions... P.983 ~ / P.986 ~

More information

Small diffuse reflective and convergent reflective type BYD50-DDT BYD50-DDT-U 1 BYD100-DDT BYD3M-TDT BYD3M-TDT-P

Small diffuse reflective and convergent reflective type BYD50-DDT BYD50-DDT-U 1 BYD100-DDT BYD3M-TDT BYD3M-TDT-P BYD Series Small diffuse reflective and convergent reflective type Features Easy installation by compact size Superior detection not affected by color of (Convergent reflective type) is located on the

More information

Retroreflective sensor with polarization filter

Retroreflective sensor with polarization filter Dimensions 45 49 Receiver 23 27 74 56 Emitter 92 23 6 x 9 slots External thread (M30 x 1.5) 10 25 32 M12 x 1 Sens Delay IMER Model Number Retroreflective sensor with 4-pin, M12 x 1 connector Electrical

More information

E3FA PHOTOELECTRIC SENSORS

E3FA PHOTOELECTRIC SENSORS EFA PHOTOELECTRIC SENSORS A n e w g e n e r a t i o n i n s e n s i n g p e r f o r m a n c e»» S i m p l i c i t y»» O n e fa m i l y fo r a l l»» N o n - s t o p d e t e c t i o n A new generation in

More information

General terms and conditions... F-7 General precautions... P panasonic.net/id/pidsx/global. Use as a warning. Sensor. Emergency stop.

General terms and conditions... F-7 General precautions... P panasonic.net/id/pidsx/global. Use as a warning. Sensor. Emergency stop. 897 Safety Sensor SERIES Related Information General terms and conditions... F-7 General precautions... P.1501 Sensor selection guide... P.885~ Korea s S-mark... P.1506 PHOTO PHOTO Conforming to Machinery

More information

Scanning Laser Range Finder Smart-URG mini UST-10LN Specification

Scanning Laser Range Finder Smart-URG mini UST-10LN Specification Date: 2016.3.24 Scanning Laser Range Finder Smart-URG mini UST-10LN Specification Symbol Amended Reason Pages Date Corrector Amendment No Approved by Checked by Drawn by Designed by UST-10LN Specification

More information

Compact, Photoelectric Sensor with Built-in Amplifier and Teaching Function. Mark Sensor with Stainless Steel Housing

Compact, Photoelectric Sensor with Built-in Amplifier and Teaching Function. Mark Sensor with Stainless Steel Housing Mark Sensor with Stainless Steel Housing Compact, Photoelectric Sensor with Built-in Amplifier and Teaching Function Color Mark Detection a World-standard Size ( x 2 x 32 mm) High speed response (50 µs)

More information

Selectable 2sec., 7sec., 15sec. (selectable by holding time setting switch)

Selectable 2sec., 7sec., 15sec. (selectable by holding time setting switch) Auto Door Auto door Features Stop time selection function (Selectable stop time 2 / 7 / 15sec.) 4 steps variable function for front sensing area (7.5, 14.5, 21.5, 28.5 : 4 steps variable) Right/eft sensing

More information

APS-S/M Series. Polycarbonate Resin Square Type, 2-wire/3-wire DC System. Type. Proximity Sensor. Features

APS-S/M Series. Polycarbonate Resin Square Type, 2-wire/3-wire DC System. Type. Proximity Sensor. Features Sensor INFORMATI Series Features Polycarbonate Resin, -wire/-wire DC System - Front Surface / Upper Surface detection - s of different frequency are available for adjacent installation. - Conformity with

More information

panasonic.net/id/pidsx/global Lights up when conditions are normal (and at incipient liquid leak detection) Use as a warning Sensor

panasonic.net/id/pidsx/global Lights up when conditions are normal (and at incipient liquid leak detection) Use as a warning Sensor 867 Safety Sensor SERIES Related Information General terms and conditions... F-3 General precautions... P.1595 guide... P.865~ Korea s S-mark... P.1602 PHOTO PHOTO Certified by NRTL Conforming to SEMI-S2

More information

Leuze electronic. Dimensioned drawing. Electrical connection. Accessories: 150m ISO 9001

Leuze electronic. Dimensioned drawing. Electrical connection. Accessories: 150m ISO 9001 Throughbeam photoelectric sensors Dimensioned drawing 15m 1-3 V DC A 2 LS Throughbeam photoelectric sensors with high performance reserve in infrared light Robust metal housing with glass cover, protection

More information

Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor

Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor CSM DS_E_4_ Excellent PET Bottle Detection New detection method that is independent of bottle shape, position, and contents. Automatic

More information

Ultrasonic Proximity Sensor

Ultrasonic Proximity Sensor Ultrasonic Proximity Sensor Compact, Cylindrical Ultrasonic Proximity Sensor with Separate Amplifier Unit Stable operation for a variety of objects regardless of color, transparency, or material (metallic

More information

E3FA/E3RA/E3FB/E3RB. Application specific models. Limited-reflective types suitable for detecting transparant film to shiny, mirror film.

E3FA/E3RA/E3FB/E3RB. Application specific models. Limited-reflective types suitable for detecting transparant film to shiny, mirror film. PHOTOELECTRIC SENSORS EFA/ERA/EFB/ERB A new generation in sensing performance Simplicity Simple selection Simple installation One family for all All standard applications covered A wide variety of models

More information

E3FA PHOTOELECTRIC SENSORS

E3FA PHOTOELECTRIC SENSORS EFA PHOTOELECTRIC SENSORS A n e w g e n e r a t i o n i n s e n s i n g p e r f o r m a n c e»» S i m p l i c i t y»» O n e fa m i l y fo r a l l»» N o n - s t o p d e t e c t i o n A new generation in

More information

enproteko.com Specifications Ratings Item voltage to 24 VAC 5/6 Hz 24 VAC 5/6 Hz or 24 VDC Allowable voltage Characteristics 85% to 11% of power suppl

enproteko.com Specifications Ratings Item voltage to 24 VAC 5/6 Hz 24 VAC 5/6 Hz or 24 VDC Allowable voltage Characteristics 85% to 11% of power suppl enproteko.com Temperature Monitoring Relay K8AB-TH Compact and Slim Relay Ideal for Temperature Alarms and Monitoring Excessive increases can be prevented and abnormal s can be monitored. Temperature monitoring

More information

E3FA PHOTOELECTRIC SENSORS

E3FA PHOTOELECTRIC SENSORS Authorised Distributors:Intech Systems Chennai Pvt. Ltd, Chennai-6 2 Ph: +91 44 45 8888 Fax: 44 45 888 E-mail: info@intechchennai.com Website: www.intechchennai.com EFA PHOTOELECTRIC SENSORS A new generation

More information

Ultrasonic Reflective Sensor

Ultrasonic Reflective Sensor Ultrasonic Reflective with an Adjustable Sensing Distance of 0.3 to 3 m Under Stable Operation without Background Interference Ensures a stable operating range with minimal side-lobe areas. Built-in unstable

More information

Exercise 1. Introduction to Sensors EXERCISE OBJECTIVE

Exercise 1. Introduction to Sensors EXERCISE OBJECTIVE Exercise 1 Introduction to Sensors EXERCISE OBJECTIVE When you have completed this exercise, you will be introduced to photoelectric, capacitive and inductive sensors; You will also be introduced to the

More information

MX1A and MX1B: Laser Displacement Detection Sensors. 85% to 110% of the rated voltage MX1A: 15VA, MX1B: 25VA

MX1A and MX1B: Laser Displacement Detection Sensors. 85% to 110% of the rated voltage MX1A: 15VA, MX1B: 25VA MX1A and MX1B: Laser Displacement Detection MX1A and MX1B: Laser Displacement Detection Built-in math capabilities available (MX1B only) Digital display on amplifier; easy setting and monitoring (MX1B

More information

Lights up when conditions are normal (and at incipient liquid leak detection) Use as a warning. Sensor. Ensure productivity. Emergency stop.

Lights up when conditions are normal (and at incipient liquid leak detection) Use as a warning. Sensor. Ensure productivity. Emergency stop. 843 Safety Liquid Leak Sensor SQ4 SERIES FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS Related Information General terms and conditions... F-17 General precautions... P.1405 Sensor selection guide... P.831~

More information

SENSORS. S8 Series HIGHLIGHTS APPLICATIONS. Phone: Fax: Web: -

SENSORS. S8 Series HIGHLIGHTS APPLICATIONS. Phone: Fax: Web:  - The sensor is designed for frequent washdowns with a corrosion-resistant AISI316L stainless steel case IP69K rated, compliant to test environments like indicated by Diversey and Ecolab. However, all models

More information

Ultrasonic Reflective Sensor

Ultrasonic Reflective Sensor Ultrasonic Reflective with an Adjustable Sensing Distance of 0.3 to 3 m Under Stable Operation without Background Interference Ensures a stable operating range with minimal side-lobe areas. Built-in unstable

More information

F3UV. Monitoring output state of UV (ultraviolet light)/illumination light source. Ultraviolet power monitor/illumination monitor.

F3UV. Monitoring output state of UV (ultraviolet light)/illumination light source. Ultraviolet power monitor/illumination monitor. Ultraviolet power monitor/illumination monitor Monitoring output state of UV (ultraviolet light)/illumination light source Features Optical Fiber Type Can be used as ultraviolet power monitor/illumination

More information

Improved productivity Two-stage detection

Improved productivity Two-stage detection Control Category 4 PLe SIL3 SAFETY LIQUID LEAK SENSOR SQ4 SERIES Conforming to Machinery & EMC Directive Certified Certified Certified by NRTL Conforming to SEMI-S2 Industry first* Improved productivity

More information

Improved productivity Two-stage detection

Improved productivity Two-stage detection Control Category 4 PLe SIL3 SAFETY LIQUID LEAK SENSOR SQ4 SERIES Conforming to Machinery & EMC Directive Certified Certified Certified by NRTL Conforming to SEMI-S2 Industry first* Improved productivity

More information

A new performance class of innovative sensor technology

A new performance class of innovative sensor technology Short form SENSORS 2 A new performance class of innovative sensor technology The delivery program: innovative and extensive. Besides through-beam and retro reflective types, reflective sensors and optical

More information

Series Description. Features. Available Models. Specifications. Specifications for All Models. Specifications for Standard Models

Series Description. Features. Available Models. Specifications. Specifications for All Models. Specifications for Standard Models Series 9000 Description The Series 9000 photoelectric sensors are designed to perform in the harshest of industrial environments. The sensor will withstand 1200 psi high-pressure washdown and IP69K, which

More information

PHOTOELECTRIC AMPLIFIER SERIES

PHOTOELECTRIC AMPLIFIER SERIES PHOTOELECTRIC AMPLIFIER SERIES Telco s photoelectric amplifier series performs as good today as it did when it first appeared almost 25 years ago. But while the simple design of this iconic product has

More information

XUBLAPCNL2 photo-electric sensor - XUB - thru beam - laser - Sn 100m VDC - cable 2m

XUBLAPCNL2 photo-electric sensor - XUB - thru beam - laser - Sn 100m VDC - cable 2m Characteristics photo-electric sensor - XUB - thru beam - laser - Sn 100m - 12..24VDC - cable 2m Buy online Complementary Enclosure material Lens material Blind zone Output type Status LED [Us] rated supply

More information

Proximity Sensors Capacitive Thermoplastic Polyester Housing Types CA18CAN/CAF...

Proximity Sensors Capacitive Thermoplastic Polyester Housing Types CA18CAN/CAF... Proximity Sensors Capacitive Thermoplastic Polyester Housing Types CA18CAN/CAF... 4 TH Generation TRIPLESHIELD TM Adjustable sensing distance: 2-10 mm Flush or 3- mm Non-flush Protection: short-circuit,

More information

Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor

Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor CSM DS_E_4_4 Excellent PET Bottle Detection New detection method that is independent of bottle shape, position, and contents. Automatic

More information

XUM0APSAM8 photo-electric sensor - XUM - multi - Sn 0..10m VDC - M8

XUM0APSAM8 photo-electric sensor - XUM - multi - Sn 0..10m VDC - M8 Characteristics photo-electric sensor - XUM - multi - Sn 0..10m - 12..24VDC - M8 Main Range of product Series name Electronic sensor type Sensor name Sensor design Detection system Material Type of output

More information

Proximity Sensors Capacitive Thermoplastic Polyester Housing Types CA30CAN/CAF...

Proximity Sensors Capacitive Thermoplastic Polyester Housing Types CA30CAN/CAF... Proximity Sensors Capacitive Thermoplastic Polyester Housing Types CA30CAN/CAF... 4TH Generation TRIPLESHIELD TM Adjustable sensing distance: 2-20 mm flush or 4-30 mm non-flush Protection: short-circuit,

More information

IR FLAME DETECTOR RIV-601/F

IR FLAME DETECTOR RIV-601/F IR FLAME DETECTOR EN 54-10 class 2 VdS approval G 205044 application manual CONTROL LOGIC rev. 4 DEC07 MAFE DEC07 IR FLAME DETECTORS SUMMARY Page general notions...3 description...4. Electrical and general

More information

IQ-Sense. 2/2 Introduction. 2/3 IQ-Sense photoelectric sensors. 2/5 IQ-Sense ultrasonic sensors. 2/6 4 IQ-Sense sensor module for ET 200S

IQ-Sense. 2/2 Introduction. 2/3 IQ-Sense photoelectric sensors. 2/5 IQ-Sense ultrasonic sensors. 2/6 4 IQ-Sense sensor module for ET 200S / Introduction /3 photoelectric sensors /5 ultrasonic sensors /6 4 sensor module for ET 00S /6 8 sensor module for ET 00M/S7-300 Introduction Configuration/parameterization Uniform configuration tools

More information

POINT HELIDECK LIGHTS PRL-LSM LED LOW SURFACE MOUNT LIGHT

POINT HELIDECK LIGHTS PRL-LSM LED LOW SURFACE MOUNT LIGHT Compliances: ETL Listed to UL 98 US & CSA C22.2 No..-4 Canada ETL Listed to UL 98A Marine Vessels IMO 9 MODU Code () paragraph 13.. FAA AC /39-2B Heliport Design Guide ICAO Annex 14, Volume II UK CAA CAP

More information

Table of Contents. Page Quick Set-up Instructions 1. Theory of Operation 2. Specifications 3. TM 1003W Controls and Connections 4

Table of Contents. Page Quick Set-up Instructions 1. Theory of Operation 2. Specifications 3. TM 1003W Controls and Connections 4 Table of Contents Page Quick Set-up Instructions 1 Theory of Operation 2 Specifications 3 TM 1003W Controls and Connections 4 1. Power Source Connector 5 2. Alarm Output Connector 5 3. Variation Detection

More information

UNIVERSAL COMPACT SENSORS

UNIVERSAL COMPACT SENSORS HIGH-PERFORMANCE SENSORS UNIVERSAL COMPACT SENSORS High-resolution sensors with LED or Laser emission Background suppression models ranging from 30 cm to m Polarised retroreflex with operating distance

More information

POINT ROLLOVER LIGHTS PRL LED HELIDECK SEMIFLUSH LIGHT

POINT ROLLOVER LIGHTS PRL LED HELIDECK SEMIFLUSH LIGHT Compliances: ETL Listed to UL 98 & UL 98A Marine Vessels USA CSA C22.2 No..-4 Canada FAA AC /39-2B Heliport Design Guide ICAO Annex 14, Volume II UK CAA CAP 437, Chapter 4, paragraph 3.1 IMO 9 MODU Code

More information

CARLO GAVAZZI Automation Components. CA18/30 CAN/CAF - Capacitive Sensors

CARLO GAVAZZI Automation Components. CA18/30 CAN/CAF - Capacitive Sensors CARLO GAVAZZI Automation Components CA18/30 CAN/CAF - Capacitive Sensors CA18/30 CAN/CAF Capacitive sensors Carlo Gavazzi is renowned for the TRIPLESHIELD TM capacitive proximity sensors with an outstanding

More information

Extreme High-Intensity Sensors Thru-Beam and Fiberoptic Penetrates Many Packaging Materials for Content Verification

Extreme High-Intensity Sensors Thru-Beam and Fiberoptic Penetrates Many Packaging Materials for Content Verification SPECIALTY APPLICATION PHOTOELECTRIC SENSORS Extreme High-Intensity Sensors Thru-Beam and Fiberoptic Penetrates Many Packaging Materials for Content Verification -104 High-Intensity Sensors The Model HSLS-1

More information

XUX0AKSAM12 photo-electric sensor - XUX - multi - Sn 0..40m VDC - M12

XUX0AKSAM12 photo-electric sensor - XUX - multi - Sn 0..40m VDC - M12 Characteristics photo-electric sensor - XUX - multi - Sn 0..40m - 12..24VDC - M12 Complementary Enclosure material Lens material Maximum sensing distance Output type Add on output Status LED [Us] rated

More information

SPACEMOTION SERIES SMM 01

SPACEMOTION SERIES SMM 01 SPACEMOTION SERIES SMM 01 Description K-Band motion and direction detection Max sensing range: 3 metres Adjustable sensing field range Adjustable slow speed zone Selectable background suppression Selectable

More information

Original operating instructions Photoelectric safety sensors (safety light curtain / safety light grid) Protected area width (range) 0...

Original operating instructions Photoelectric safety sensors (safety light curtain / safety light grid) Protected area width (range) 0... Original operating instructions Photoelectric safety sensors (safety light curtain / safety light grid) Protected area width (range) 0...12 m OY UK 704555 / 05 02 / 2018 Contents 1 Preliminary note...4

More information

2 General Application Photoelectric Sensors

2 General Application Photoelectric Sensors 2 General Application Photoelectric Sensors General Purpose Photoelectric Sensor 2-49 General Application Photoelectric Sensors 2 Designed for Trouble-Free Operation Many design features have been incorporated

More information

2 General Application Photoelectric Sensors

2 General Application Photoelectric Sensors SMARTEYE PRO/PRO 2 General Application Photoelectric Sensors Self-Adjusting General Purpose Sensor www.ttco.com 800-237-0946 2-7 General Application Photoelectric Sensors 2 SMARTEYE PRO/PRO The SMARTEYE

More information

Cat. N. Cat. N (s) 1. DESCRIPTION - USE 3. OVERALL DIMENSIONS. Technology : 4. PREPARATION - CONNECTION 2. PRODUCT RANGE

Cat. N. Cat. N (s) 1. DESCRIPTION - USE 3. OVERALL DIMENSIONS. Technology : 4. PREPARATION - CONNECTION 2. PRODUCT RANGE Cat. N STOP & GO automatic resetting 87045 LIMOGES Cedex - FRANCE Telephone : + 33 5 55 06 87 87 Fax: + 33 5 55 06 88 88 Cat. N (s) : 4 062 88 / 4 062 89 CONTENTS PAGE 1. Description - Use... 1 2. Product

More information

Vacuum unit ideal for controlling large flow rates Vacuum unit VSQ/VSQP series

Vacuum unit ideal for controlling large flow rates Vacuum unit VSQ/VSQP series Vacuum unit ideal for controlling large flow rates Vacuum unit VSQ/VSQP series Features This 1.5 mm width vacuum unit is ideal for controlling large flow rates. A vacuum ejector unit and vacuum switching

More information

2 General Application Photoelectric Sensors

2 General Application Photoelectric Sensors SMARTEYE PRO/PRO REMOTE General Purpose Photoelectric Sensor 2 General Application Photoelectric Sensors 2-7 General Application Photoelectric Sensors 2 SMARTEYE PRO/PRO REMOTE The SMARTEYE PRO is not

More information

Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor

Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor CSM DS_E_4_7 Excellent PET Bottle Detection New detection method that is independent of bottle shape, position, and contents. Automatic

More information

POINT ROLLOVER LIGHTS PRL LED HELIPORT INSET LIGHT

POINT ROLLOVER LIGHTS PRL LED HELIPORT INSET LIGHT Compliances: ETL Listed to UL 98 ETL Listed to UL 98A Marine Vessels ETL Listed to CSA C22.2 No..-4 Canada FAA AC /39-2B Heliport Design Guide ICAO Annex 14, Volume II UK CAA CAP 437, Chapter 4, paragraph

More information

2 General Application Photoelectric Sensors

2 General Application Photoelectric Sensors MITY EYE General Purpose Photoelectric Sensor 2 General Application Photoelectric Sensors 2-49 General Application Photoelectric Sensors 2 MITY EYE Designed for Trouble-Free Operation Many design features

More information

culus and CE Marked for all applicable directives Operating Environment Operating Temperature [C (F)]

culus and CE Marked for all applicable directives Operating Environment Operating Temperature [C (F)] 8 mm Cylindrical Description The 8 mm cylindrical family of general purpose photoelectric sensors is intended for light to medium duty industrial applications. The family provides an indication if the

More information

English. Series. Installation and Use Manual

English. Series. Installation and Use Manual English Series FOSTER Installation and Use Manual FOSTER Rev.13 03/2015 MITECH srl reserves the right to change the information in this document without warning. Index Anti-intrusion barrier 3 Main components

More information

IEC UC3 compliant (short current 3,000 A) 1 Form A 120A power latching relays

IEC UC3 compliant (short current 3,000 A) 1 Form A 120A power latching relays To Be Discontinued IEC62055-31 UC3 compliant (short current 3,000 A) 1 Form A 120A power latching relays DZ RELAYS (ADZ) New New Horizontal terminal type FEATURES 1. IEC62055-31 UC3 compliant (short current

More information

Table of Contents. Protective Relays

Table of Contents. Protective Relays Table of Contents KILOVAC WD Series, DIN Rail or Screw Mounted Introduction..........................................................11-2 KILOVAC WD25 Paralleling Relays........................................11-3

More information

Communications None RS-232C RS-422* RS-485* BCD Transmission output*/** (4 to 20 ma) E5AX- E5AX- L(M)A02 L(M)A03

Communications None RS-232C RS-422* RS-485* BCD Transmission output*/** (4 to 20 ma) E5AX- E5AX- L(M)A02 L(M)A03 Digital Controller A 96 x 96-mm (DIN) Digital Process Controller Optimum PID control with feed-forward control circuitry. High accuracy (+0.3% FS +1 digit max.). Replaceable Output Units. Models with communications

More information

E2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information

E2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information Liquid Level Sensor EK-L CSM_EK-L_DS_E_4_ Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid Mount to bypass pipes. Fit a wide range of pipe diameters: 8 to 11 mm or 1 to mm Built-in

More information

MODEL: 47LCT. Digital Panel Meters 47 Series. [3] DISPLAY COLOR R: Red YR: Orange G: Green BG: Bluegreen B: Blue W: White

MODEL: 47LCT. Digital Panel Meters 47 Series. [3] DISPLAY COLOR R: Red YR: Orange G: Green BG: Bluegreen B: Blue W: White Digital Panel Meters 47 Series CT DIGITA PANE METER (4½ digit, ED display type, true RMS sensing) Functions & Features 4 ½ digit CT input digital panel meter 1/8 DIN size Moving average function to suppress

More information

Reliable Detection of Transparent Objects

Reliable Detection of Transparent Objects NEW Transparent Object Detection Photoelectric Sensor Reliable Detection of Transparent Objects These Photoelectric Sensors Contribute to the Food and Packaging Industries by Detecting the Objects Regardless

More information

Safety Light Curtains Area Access Control

Safety Light Curtains Area Access Control Presence Sensing Safety Devices Description The AAC photoelectric safety switch is a single-beam, noncontact presence sensing safety device consisting of separate transmitter and receiver units. The light

More information

5.0. Photoelectric Sensors. Technical Reference. Introduction

5.0. Photoelectric Sensors. Technical Reference. Introduction .0 Technical Reference Photoelectric sensors use light to detect the presence or absence of an object. The main advantages of photoelectric sensors are noncontact sensing of objects and greatly extended

More information

FT10Aseries. Self-check feature provided. Fiber type / CMD. Within detecting distance 40 m

FT10Aseries. Self-check feature provided. Fiber type / CMD. Within detecting distance 40 m series Fiber type / CMD Self-check feature provided Within detecting distance 40 m with fiber length 2 m Transmitter and receiver as a set; dimensions same for both The sensor is composed of an optical

More information

Tubular Optical Sensors. BOS S18 Economical Series Applications. Description. Features

Tubular Optical Sensors. BOS S18 Economical Series Applications. Description. Features BOS S8 Description Features Applications The BOS S8 is the answer for applications requiring simple part presence detection. The BOS S8 family contains the most popular models used in industry today. Manufactured

More information

Datasheet: K-22 LO Sensor

Datasheet: K-22 LO Sensor Datasheet: K-22 LO Sensor The K- 22 LO is a CO2 sensor module designed to be built- in into stationary ventilation equipment, such as window vent or duct exhaust actuators, serving as a linear transmitter

More information

EE-SX91. Meeting Customer Needs with Compact Sensors that Mount with M3 Screws

EE-SX91. Meeting Customer Needs with Compact Sensors that Mount with M3 Screws Compact Pre-wire Photomicrosensor with Built-in Amplifier (Non-moulate) EE-SX9 Meeting Customer Nees with Compact Sensors that Mount with M Screws Both light- an ark- outputs (antivalent outputs) provie.

More information

for relative humidity and temperature with calibration certificates

for relative humidity and temperature with calibration certificates 1 859 1859P01 1859P02 QFA4160 AQF4150 Symaro Room Sensor for relative humidity and temperature with calibration certificates QFA4160 Operating voltage AC 24 V or DC 13.5...3 Signal output DC 0...10 V for

More information

ISIS SAFETY SYSTEM Installation guide

ISIS SAFETY SYSTEM Installation guide ISIS SAFETY SYSTEM Installation guide CAUTION This information is designed to help suitably qualified personnel install and operate Mechan Safety equipment. Before using this product, read this guide thoroughly

More information

Laser Distance Sensor Type M Analog-Output

Laser Distance Sensor Type M Analog-Output Laser Distance Sensor Type M Analog-Output Operating Manual Version 2.3, May 2009 ELAG Elektronik AG l Stegackerstrasse 14 l CH-8409 Winterthur Contents 1. Safety 1.1 Laser safety 1.2 Electrical safety

More information

This symbol indicates prohibition. The specific prohibited action is provided in and/or around the figure.

This symbol indicates prohibition. The specific prohibited action is provided in and/or around the figure. No. 59-88-0 INSTALLATION INSTRUCTIONS PHOTOELECTRIC DETECTOR Smart Line series Model SL-00QN SL-50QN SL-650QN Detection range 60m/00ft. 00m/50ft. 00m/650ft. FEATURES Quad high power beams Smart design

More information

Description. Optex Incorporated

Description. Optex Incorporated Optex Incorporated Description 1845 W. 205 th St. Torrance, CA 90501-1510 USA TEL (310) 533-1500 and (800) 966-7839 FAX (310) 533-5910 Doc: Model: Desc: Architect/ Engineer Specifications CX-502 PIR Intrusion

More information

Advanced Ultraviolet Burner Controller

Advanced Ultraviolet Burner Controller No. CP-SS-7E Advanced Ultraviolet Burner Controller Model AUR300C/AUR30C Overview The AUR300C Advanced Ultraviolet Burner Controller and AUR30C Advanced Ultraviolet Burner Controller with Communication

More information

TLS 600. Installation and Operation Manual. English Pages CEDES AG is certified according to ISO 9001: V 1.0.

TLS 600. Installation and Operation Manual. English Pages CEDES AG is certified according to ISO 9001: V 1.0. Installation and Operation Manual RoHS CEDES AG is certified according to ISO 9001: 2008 English Pages 2-12 111 189 130208 V 1.0 Contents 1. About this manual 2 1.1 Measurements 2 1.2 Related documents

More information

Automatic Self-Adjusting General Purpose Sensor

Automatic Self-Adjusting General Purpose Sensor SMARTEYE EZ-PRO 2 General Application Photoelectric Sensors Automatic Self-Adjusting General Purpose Sensor 2-1 General Application Photoelectric Sensors 2 SMARTEYE EZ-PRO The SMARTEYE EZ-PRO is a high

More information

2 Specialty Application Photoelectric Sensors

2 Specialty Application Photoelectric Sensors SMARTEYE HIGH INTENSITY 2 Specialty Application Photoelectric Sensors High Intensity Through Beam Sensor www.ttco.com 800-237-0946 2-121 Specialty Application Photoelectric Sensors 2 SMARTEYE HIGH INTENSITY

More information

AUR300C, AUR350C. Advanced Ultraviolet Burner Controller

AUR300C, AUR350C. Advanced Ultraviolet Burner Controller No. CP-SS-7E Overview The AUR300C is a burner controller with a dynamic selfchecking function and is used in combination with the AUD300C or AUD00C Advanced Ultraviolet Flame Detector. This AUR300C controls

More information

BOS 23K. Photoelectric Sensors BOS 23K

BOS 23K. Photoelectric Sensors BOS 23K The new photoelectric series stands for precise switching behavior with exact positioning tasks. Its high ranges and compact design provide for great freedom in designing the system. The laser variants

More information

TLS 500. Installation and Operation Manual. English Pages CEDES AG is certified according to ISO 9001: V 1.1.

TLS 500. Installation and Operation Manual. English Pages CEDES AG is certified according to ISO 9001: V 1.1. Installation and Operation Manual RoHS CEDES AG is certified according to ISO 9001: 200808 English Pages 2-12 110 605 130208 V 1.1 Contents 1. About this manual 2 1.1 Measurements 2 1.2 Related documents

More information

Laser retro-reflective photoelectric sensor with polarization filter. Dimensioned drawing

Laser retro-reflective photoelectric sensor with polarization filter. Dimensioned drawing Dimensioned drawing en 1-214/7 5122143 3 Hz.5 26m We reserve the right to make changes DS_PRKL2566P_en_5122143.fm 1-3 V D 2 LS Laser class 1 acc. to EN 6825-1 Polarized retro-reflective photoelectric sensor

More information