Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Date of issue: Holder of certificate: TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch, 3-13F, No. 151 Heng Tong Road SHANGHAI , P. R. CHINA Test location: No Duhui Road, Shanghai , P.R. China Tests in the fields: Electrical Safety, Energy Efficiency, Mechanical Safety, Industrial Machinery, Furniture and Luminaires The laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standard test methods listed here with different issue dates or revision status updates The testing laboratory maintains a current list of all testing within the flexible scope of accreditation A. Electrical Safety / Energy efficiency 1/41

2 1. Power Tools and Machinery IEC :2006 EN : A11:2010 DIN EN : A11:2011 VDE : A11:2011 IEC : A1:2008 EN :2010 DIN EN :2011 VDE :2011 IEC : A1:2008 EN :2010 DIN EN :2011 VDE :2011 IEC : A1:2010 EN :2011 DIN EN :2012 VDE :2012 IEC : A1:2008 EN : A11:2011 DIN EN :2012 VDE :2012 IEC :2010 EN :2010 DIN EN :2011 VDE :2011 Hand-held motor-operated electric tools Safety. Hand-held motor-operated electric tools Safety Part 2-1: Particular requirements for drills and impact drills. Hand-held motor-operated electric tools Safety Part 2-2: Particular requirements for screwdrivers and impact wrenches. Hand-held motor-operated electric tools Safety Part 2-3:Particular requirements for grinders, polishers and disk-type sanders. Hand-held motor-operated electric tools Safety Part 2-4: Particular requirements for sanders and polishers other than disk type. Hand-held motor-operated electric tools Safety Part 2-5: Particular requirements for circular saws. Period of validity: to Date of issue: /41

3 IEC : A1: A2:2008 EN :2010 DIN EN :2011 VDE :2011 EN :2000 DIN EN :2001 VDE :2001 EN 50580:2012+ A1:2013 DIN EN 50580:2014 VDE :2014 IEC :1989 IEC : A1:2008 EN :2010 DIN EN :2011 VDE :2011 IEC : A1:2009 EN : A1:2010 DIN EN :2011 VDE :2011 IEC : A1: A2:2010 EN : A2:2010 DIN EN :2011 VDE :2011 Hand-held motor-operated electric tools Safety Part 2-6: Particular requirements for hammers. Hand-held motor-operated electric tools Safety Part 2-7: Particular requirements for spray guns. Safety of hand-held electric motor operated tools - Particular requirements for spray guns Hand-held motor-operated electric tools Safety Part 2-7: Particular requirements for spray guns for non-flammable liquids. Hand-held motor-operated electric tools Safety Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws). Hand-held motor-operated electric tools Safety Part 2-13: Particular requirements for chain saws. Hand-held motor-operated electric tools Safety Part 2-14: Particular requirements for planers. Period of validity: to Date of issue: /41

4 IEC : A1:2009 EN : A1:2010 DIN EN :2010 VDE :2010 IEC :2008 EN :2010 DIN EN :2011 VDE :2011 IEC :2010 EN :2010 DIN EN :2011 VDE :2011 IEC : A1:2010 EN : A1:2010 DIN EN :2011 VDE :2011 IEC :2011 EN :2011 DIN EN :2012 VDE :2012 IEC :2012 EN :2013 DIN EN :2013; VDE :2013 Hand-held motor-operated electric tools Safety Part 2-15: Particular requirements for hedge trimmers. Hand-held motor-operated electric tools Safety Part 2-16: Particular requirements for tackers. Hand-held motor-operated electric tools Safety Part 2-17: Particular requirements for routers and trimmers. Hand-held motor-operated electric tools Safety Part 2-19: Particular requirements for jointers. Hand-held motor-operated electric tools Safety Part 2-22: Particular requirements for cut-off machine. Hand-held motor-operated electric tools Safety Part 2-23: Particular requirements for die grinders and small rotary tools. Period of validity: to Date of issue: /41

5 IEC :1990 EN : A11:2010 DIN EN :2011 VDE :2011 IEC : A1: A2:2001 EN :2010 DIN EN :2010 VDE :2010 IEC :1993 IEC : A1:2001 EN :2011 DIN EN :2012 VDE :2012 IEC : A1:2001 EN :2011 DIN EN :2011 VDE :2011 IEC : A1:2001 EN :2011 DIN EN :2012 VDE :2012 IEC :1993 EN :2010 DIN EN :2011 VDE :2011 IEC :1993 Safety of transportable motor-operated electric tools Part 1: General requirements. Safety of transportable motor-operated electric tools Part 2-1: Particular requirements for circular saw benches. Safety of transportable motor-operated electric tools Part 2-2: Particular requirements for radial arm saws. Safety of transportable motor-operated electric tools Part 2-3: Particular requirements for planers and thicknessers. Safety of transportable motor-operated electric tools Part 2-4: Particular requirements for bench grinders. Safety of transportable motor-operated electric tools Part 2-5: Particular requirements for band saws. Safety of transportable motor-operated electric tools Part 2-6: Particular requirements for diamonds drills with water supply. Safety of transportable motor-operated electric tools Part 2-7: Particular requirements for diamonds saws with water supply. Period of validity: to Date of issue: /41

6 IEC : A1: A2:2001 EN :2010 DIN EN :2010 VDE :2010 IEC :1995 EN :2009 DIN EN :2010 VDE :2010 IEC :1998 EN :2010 DIN EN :2010 VDE :2010 IEC :2001 EN :2009 DIN EN :2010 VDE :2010 Safety of transportable motor-operated electric tools Part 2-8: Particular requirements for single spindle vertical moulders. Safety of transportable motor-operated electric tools Part 2-9: Particular requirements for mitre saws. Safety of transportable motor-operated electric tools Part 2-10: Particular requirements for cutting-off grinders. Safety of transportable motor-operated electric tools Part 2-11: Particular requirements for combined mitre and bench saws. IEC :2014+ Corrigendum1:2014 EN :2015 DIN EN :2016; VDE :2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety IEC :2014 Electric motor-operated hand-held tools, EN :2014 transportable tools and lawn and garden machinery. DIN EN :2015 Safety Part 2-2: Particular requirements for VDE :2015 screwdrivers and impact wrenches. IEC :2014 Electric motor-operated hand-held tools, EN :2014 transportable tools and lawn and garden machinery. DIN EN :2015 Safety Part 2-4: Particular requirements for handheld sanders and polishers other than disc VDE :2015 type IEC :2014 EN :2014 DIN EN :2015 VDE :2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Part 2-5: Particular requirements for handheld circular saws Period of validity: to Date of issue: /41

7 IEC :2015 EN :2016 DIN EN :2014 VDE :2014 IEC :2015 EN :2015 DIN EN :2016 VDE :2016 IEC :2014 EN :2014 DIN EN :2015 VDE :2015 IEC :2014 EN :2014 DIN EN :2015 VDE :2015 IEC :2014+ Corrigendum1:2015 EN :2015 DIN EN :2016 VDE :2016 IEC :2015 EN :2015 DIN EN :2016 VDE :2016 ISO 10517:2009 EN ISO 10517:2009 DIN EN ISO 10517:2010 ISO 8437: A1:1997 EN 12151:2007 DIN EN 12151:2008 EN 12418: A1:2009 DIN EN 12418:2010 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Part 2-11: Particular requirements for handheld reciprocating saws Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Part 2-14: Particular requirements for handheld planers Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Part 3-1: Particular requirements for transportable table saws Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Part 3-6: Particular requirements for diamond drills with liquid system Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Part 3-9: Particular requirements for transportable mitre saws Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Part 3-10: Particular requirements for transportable cut-off machines Powered hand-held hedge trimmers Safety. Snowthrowers Safety requirements and test procedures. Machinery and plants for the preparation of concrete and mortar Safety requirements. Masonry and stone cutting-off machines for job site Safety. Period of validity: to Date of issue: /41

8 EN 12717: A1:2009 DIN EN 12717:2009 EN 13898: A1:2009 DIN EN 13898:2009 ISO 19432:2006 EN ISO 19432:2008 DIN EN ISO 19432:2010 IEC : A1:2008 EN : A1:2009 DIN EN : A1:2009 VDE : A1:2009 EN 809: A1: AC:2010 DIN EN 809:2012 Safety of machine tools Drilling machines. Machine tools Safety Sawing machines for cold metal. Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements and testing. Safety of machinery Electrical equipment of machines Part 1: General requirements. Pumps and pump units for liquids Common safety requirements. 2. Household appliances IEC :2010+A1:2013+A2:20 16 EN :2012+A11:2014 DIN EN :2012 VDE :2012 IEC : A1:2012 +A2:2016 EN : A11 :2012+A1:2013 2:2014 VDE :2014 Household and similar electrical appliances Safety Part 1: General requirements. Limitation: Excluding tests according to Annex J: Coated printed circuit boards. Household and similar electrical appliances Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances. Limitation: Excluding tests of current carrying hoses according to clause 21. Period of validity: to Date of issue: /41

9 IEC :2012+ A1:2015 EN :2016 3:2016 VDE :2016 IEC :2008+A1:2012 EN :2010+A1:2015 4:2015 VDE :2015 IEC :2014 EN :2015 6:2016 VDE :2016 IEC : A1:2011+A2:2016 EN :2010+A1:2013+A11: :2014 VDE :2014 IEC :2012+ A1:2015 EN : A1:2016 8:2016 VDE :2016 IEC :2008+ A1: A2:2016 EN : A1: A2: A12: A13: AC:2011 9:2011 VDE :2011 Household and similar electrical appliances Safety Part 2-3: Particular requirements for electric irons. Part 2-4: Particular requirements for spin extractors. Household and similar electrical appliances Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances. Part 2-7: Particular requirements for washing machines. Household and similar electrical appliances Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances. Household and similar electrical appliances Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances. Period of validity: to Date of issue: /41

10 IEC : A1:2008 EN : A1: :2009 VDE :2009 IEC : A1:2012+A2:2015 EN :2010+A11:2012+A1: :2015 VDE :2015 IEC : A1:2008 EN : A1: :2009 VDE :2009 IEC : A1:2016 EN :2010+ A11: :2013 VDE :2013 IEC :2016 EN : A1:2008+ A11: A12: :2012 VDE :2012 IEC :2012+ A1:2016 EN : :2012 VDE :2012 Household and similar electrical appliances Safety Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines. Part 2-11: Particular requirements for tumble dryers. Part 2-12: Particular requirements for warming plates and similar appliances. Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances. Part 2-14: Particular requirements for kitchen machines. Part 2-15: Particular requirements for appliances for heating liquids. Period of validity: to Date of issue: /41

11 IEC : A1: A2:2011 EN : A1: A2: :2012 VDE :2012 Part 2-16: Particular requirements for food waste disposers. IEC :2012 EN : A1:2005+ A2: :2009 VDE :2009 IEC :2016 EN : A1: A11:2010 +AC : A2 : :2015 VDE :2015 IEC : A1:2012 EN : :2010 VDE :2010 IEC :2010+A1:2014+A2:201 5 EN :2012+A1:2015+A2: :2016 VDE :2016 Part 2-21: Particular requirements for storage water heaters. Part 2-23: Particular requirements for appliances for skin or hair care. Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers. Limitation: Excluding tests according to Annex CC: Non-sparking n electrical apparatus. Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens. IEC :2009+A1:2012+A2:2 015 EN : :2014 VDE :2014 Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation. Period of validity: to Date of issue: /41

12 IEC : A1:2008 EN : A1: :2009 VDE :2009 IEC :2016 EN : A2: : 2010 VDE :2010 IEC :2009 EN : A11: :2013 VDE :2013 IEC :2012 EN : :2015 VDE :2015 IEC : A1:2008+A2 :2013 EN : A1:2008+A2 : : 2015 VDE :2015 IEC :2012+A1:2015+A2:2 016 EN : :2013 VDE :2013 Part 2-28: Particular requirements for sewing machines. Part 2-29: Particular requirements for battery chargers. Part 2-30: Particular requirements for room heaters. Household and similar electrical appliances Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors. Part 2-32: Particular requirements for massage appliances. Part 2-34: Particular requirements for motorcompressors. Period of validity: to Date of issue: /41

13 IEC :2012+A1:2016 EN : :2012 VDE :2012 IEC :2012 EN : A1: A2: :2010 VDE :2010 IEC : A1: A2:2008 EN : A1: A2: :2009 VDE :2009 IEC : A1: A2:2011 EN : A1: A2: :2012 VDE :2012 IEC : A1: A2:2011 EN : A1: A2: :2012 VDE :2012 Part 2-35: Particular requirements for instantaneous water heaters. Part 2-41: Particular requirements for pumps. Part 2-43: Particular requirements for clothes dryers and towel rails. Household and similar electrical appliances Safety Part 2-44: Particular requirements for ironers. Household and similar electrical appliances Safety Part 2-45: Particular requirements for portable heating tools and similar appliances. Period of validity: to Date of issue: /41

14 IEC : A1:2008 EN : A1: A11:2010+ AC : :2012 VDE :2012 IEC :2008+ A1:2015 EN :2008 +A11:2012+AC:2015+A 1: :2013 VDE :2013 IEC : A1: A2:2009 EN : A1: A2: :2010 VDE :2010 IEC : A1: A2:2008 EN : A1: A2: A11: A12: :2010 VDE :2010 IEC : A1:2008+ A2:2015 EN : A1: A11: :2013 VDE :2013 Household and similar electrical appliances Safety Part 2-52: Particular requirements for oral hygiene appliances. Household and similar electrical appliances Safety Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam. Limitation: Excluding tests of current carrying hoses according to clause 21. Household and similar electrical appliances Safety Part 2-59: Particular requirements for insect killers. Part 2-60: Particular requirements for whirlpool baths and whirlpool spas. Part 2-65: Particular requirements for air-cleaning appliances. Limitation: Excludig tests according to clause 32: Radiation, toxidity and similar hazards. Period of validity: to Date of issue: /41

15 IEC :2016 EN : :2015 VDE :2015 IEC :2016 EN : :2014 VDE :2014 IEC :2002 EN : :2011 VDE :2011 IEC : A1:2008 EN : A1: :2009 VDE :2009 IEC :2016 EN : :2015 VDE :2015 IEC :2015 EN : A1: A2: :2009 VDE :2009 Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use. Limitation: Excluding tests of current carrying hoses according to clause 21. Part 2-72: Particular requirements for automatic machines for floor treatment for commercial and industrial use. Household and similar electrical appliances Safety Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers. Household and similar electrical appliances Safety Part 2-78: Particular requirements for outdoor barbecues. Household and similar electrical appliances Safety Part 2-79: Particular requirements for high pressure cleaners and steam cleaners. Limitation: Excluding tests according to clauses , , , , and : Tests for high-pressure cleaner with water heater of gas-fired or oil-fired type. Part 2-80: Particular requirements for fans. Period of validity: to Date of issue: /41

16 IEC : A1:2008+ A2:2013 EN : A1: :2009 VDE :2009 IEC : A1:2008 EN : A1: :2009 VDE :2009 IEC :2010+A1:2012+A2:2 015 EN : 2010+A1: :2010 VDE :2010 IEC :2015 EN : A1: : 2011 VDE : 2011 IEC :2008 EN : :2004 VDE :2004 EN :2014 DIN EN :2014 VDE :2014 Part 2-84: Particular requirements for toilets. Household and similar electrical appliances Safety Part 2-85: Particular requirements for fabric steamers. Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor. Limitation: Excluding tests according to Annex BB: Non-sparking n electrical apparatus. Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens Limitation: Excluding tests according to Annex BB Requirements for commercial microwave ovens without a cavity door and with conveyor-type means Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers. Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers Period of validity: to Date of issue: /41

17 IEC :2002 EN : :2006 VDE :2006 EN :2014 DIN EN :2014 VDE :2014 IEC : :2010 VDE :2010 EN :2014 DIN EN :2014 VDE :2014 IEC :2011 EN : :2005 VDE :2005 IEC :2011+A1:2015 EN :2015+A1: :2005 VDE :2005 IEC :2016 EN : A11: A2:2010+A12 : :2015 VDE :2015 Part 2-92: Particular requirements for pedestriancontrolled mains-operated lawn scarifiers and aerators. Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestriancontrolled mains-operated lawn scarifiers and aerators Part 2-94: Particular requirements for scissors type grass shears. Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use. Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use. Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment. Period of validity: to Date of issue: /41

18 IEC : A1: A2:2008 EN : A1: A2: :2009 VDE :2009 IEC : :2010 VDE :2010 EN :2014 DIN EN :2014 VDE :2014 IEC : A1:2008 +A2:2014 EN :2002 +A1:2008+A2: : 2009+A2:2016 VDE : A2:2016 IEC :2015 EN : :2016 VDE :2016 Part 2-98: Particular requirements for humidifiers. Part 2-100: Particular requirements for hand-held mains operated garden blowers, vacuums and blower vacuums. Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for handheld mains-operated garden blowers, vacuums and blower vacuums Household and similar electrical appliances Safety Part 2-101: Particular requirements for vaporizers Part 2-103: Particular requirements for drives for gates, doors and windows. 3. Components IEC : A1:2008 IEC :2016 EN : A1: A11: :2010 VDE :2010 EN 50434:2014 DIN EN 50434:2015 IEC :2002 +A1:2006+A2:2013 Part 2-105:Particular requirements for multifunctional shower cabinets. Particular requirements for powered shredders. Plugs and socket-outlets for household and similar purposes Part 1: General requirements. Period of validity: to Date of issue: /41

19 DIN VDE :2016 Plugs and socket-outlets for household and similar purposes Part 1: General requirements. DIN VDE :2016 Plugs and socket-outlets for household and similar purposes Part 2-1: General requirements on plugs and portable socket-outlets AS/NZS 3112:2011+A1:2012 IEC 61242: A1:2008 +A2:2015 EN 61242: A1:2008 +A2:2016 DIN EN 61242:2008 VDE :2008 IEC : A1:2009 EN : A1:2009 DIN EN : A1:2009 VDE : A1:2009 IEC :2009 EN :2009 DIN EN :2009 VDE :2009 IEC :2009 EN :2009 DIN EN :2010 VDE :2010 IEC :2009+A1:2013 EN :2009+A1:2013 DIN EN :2014 VDE :2014 Approval and test specification Plugs and socketoutlets. Electrical accessories Cable reels for household and similar purposes. Safety of power transformers, power supplies, reactors and similar products Part 1:General requirements and tests. Limitation: Excluding tests according to Annexes K: Insulated winding wires for use as multiple layer insulation and W: Coated printed circuit boards. Safety of transformers, reactors, power supply units and similar products for supply voltages up to V Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers. Safety of transformers, reactors, power supply units and similar products for supply voltages up to V Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers. Safety of transformers, reactors, power supply units and similar products for supply voltages up to V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units. Limitation: See part 1. Period of validity: to Date of issue: /41

20 4. IT/AV/MEAS IEC : A1:2009 +A2:2013 EN : A11: A1:2010 +A12:2011+A2:2013 DIN EN :2014 VDE :2014 IEC 60065:2014 EN 60065:2014 DIN EN 60065:2015 VDE 0860:2015 IEC :2010 EN :2010 DIN EN :2011 VDE :2011 IEC :2014 EN :2014 DIN EN :2015 VDE :2015 DIN 72553: Luminiaires IEC :2014 EN :2015 DIN EN :2015; VDE :2015 IEC : A1:1987 EN :1989 DIN VDE :1991; VDE :1991 IEC :2011 EN :2012 DIN EN :2012 VDE :2012 Information technology equipment-safety Part 1:General requirements. Limitation: Excluding tests according to Annex U: Insulated windings wires for use without interleaved insulation. Excluding tests according to Annex Y: UV-light conditioning test. Audio, video and similar electronic apparatus Safety requirements. Limitation: Excluding tests according to Annex H: Insulated windings wires for use without interleaved insulation. Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements. Limitation: Excluding tests with respect to ultrasonic pressure according to clause Excluding tests according to Annex H: Qualification of conformal coatings for protection against pollution. Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials. Battery jumper cable for road vehicles with combustion engines; dimensions, requirements, test. Luminaires Part 1: General requirements and tests. Luminaires Part 2: Particular requirements Section One: Fixed general purpose luminaires. Luminaires Part 2: Particular requirements Section 2: Recessed luminaires. Period of validity: to Date of issue: /41

21 IEC : A1:2011 EN : A1:2011 DIN EN :2011 VDE :2011 IEC :1997 EN :1997 DIN EN :1998 VDE :1998 IEC :2015 EN :2015 DIN EN :2016 VDE :2016 IEC : A1:1996 EN : A1:1997 DIN EN :1997 VDE :1997 Luminaires Part 2-3: Particular requirements Luminaires for road and street lighting. Luminaires Part 2: Particular requirements Section 4: Portable general purpose luminaires. Luminaires Part 2-5: Particular requirements Floodlights. Luminaires Part 2: Particular requirements Section 6: Luminaires with built-in transformers for filament lamps. IEC : A2:1994 EN : A2:1996 DIN VDE :1997 VDE :1997 Luminaires Part 2: Particular requirements Section Seven: Portable luminaires for garden use. IEC :2013 EN :2013 DIN EN :2014 VDE :2014 IEC :2013 EN :2013 DIN EN :2014 VDE :2014 Luminaires Part 2-8: Particular requirements Handlamps. Luminaires Part 2-11: Particular requirements Aquarium luminaires. Period of validity: to Date of issue: /41

22 IEC :2013 EN :2013 Luminaires Part 2-12: Particular requirements Mains socket-outlet mounted nightlights. DIN EN :2014 VDE :2014 IEC : A1:2011 EN : A1:2012 DIN EN :2012 VDE :2012 Luminaires Part 2-13: Particular requirements Ground recessed luminaires. IEC :2014 EN :2015 Luminaires Part 2-20: Particular requirements Lighting Chains. DIN EN :2015 VDE :2015 IEC :2014 EN :2015 Luminaires Part 2-21: Particular requirements Rope lights DIN EN :2015 VDE :2015 IEC :2014 EN :2014 Luminaires Part 2-22: Particular requirements Luminaires for emergency lighting DIN EN :2015 VDE :2015 IEC 60968:2015 EN 60968:2015 Self-ballasted lamps for general lighting services Safety requirements. DIN EN 60968:2016 VDE :2016 IEC :2015 EN :2015 Lamp control gear Part 1: General and safety requirements. DIN EN :2016 VDE :2016 Period of validity: to Date of issue: /41

23 IEC :2011 EN :2012 DIN EN :2012 VDE :2012 Lamp control gear Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps. IEC :2011 EN : AC:2011 DIN EN :2012 VDE :2012 Lamp control gear Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps. IEC :2001 EN :2001 DIN EN :2002 VDE :2002 Lamp control gear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires. IEC :2014 EN :2014 DIN EN :2015 Lamp control gear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules. VDE :2015 IEC 62031: A1: A2:2014 LED modules for general lighting Safety specifications. EN 62031: A1: A2:2015 DIN EN 62031:2015; VDE :2015 IEC 62471:2006 EN 62471:2008 DIN EN 62471:2009 VDE :2009 Photobiological safety of lamps and lamp systems. IEC/TR :2009 DIN EN Beiblatt 1:2009 VDE Beiblatt 1:2009 Photobiological safety of lamps and lamp systems Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety. Period of validity: to Date of issue: /41

24 6. Energy efficiency IEC/TR 62778:2012 DIN IEC/TR 62778:2014 DIN SPEC 42778:2014 IEC 62560:2011+ A1:2015 EN 62560: A1:2015 DIN EN 62560:2016 VDE :2016 IEC 62838:2015 EN 62838:2016 DIN EN 62838:2016 VDE :2016 IEC 60570:2003 EN 60570:2003 DIN EN 60570:2004 VDE :2004 IEC 60357: A1: A2: A3:2011 EN 60357: A1: A2: A3:2011 DIN EN 60357:2011 AS/NZS :2014 AS/NZS :2011 IEC 61167:2011 EN 61167:2011 DIN EN 61167:2011 Application of IEC for the assessment of blue light hazard to light sources and luminaires (IEC/TR 62778:2012) Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications. LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications Electrical supply track systems for luminaires Tungsten halogen lamps (non-vehicle) Performance specifications Incandescent lamps for general lighting service Part 1: Test methods Energy performance. Incandescent lamps for general lighting service Part 2: Minimum energy performance standards (MEPS) requirements. Metal Halide lamps. Period of validity: to Date of issue: /41

25 IEC ed1.2:2001 EN 60969: A1: A2:2000 DIN EN 60969:2001 AS/NZS :2010 AS/NZS : A1:2011 AS/NZS :2001 AS/NZS :2002 IEC 60064: A4: A5:2009 EN 60064: A2: A3: A4: A11: A5:2009 DIN EN 60064:2010 EN 50285:1999 DIN EN 50285:1999 IEC 62301:2011 EN 62301:2005 DIN EN 62301:2011 EN 50564:2011 DIN EN 50564:2011 VDE :2011 Self-ballasted lamps for general lighting services Performance requirements. Self-ballasted lamps for general lighting services Part 1: Test methods Energy performance. Self-ballasted lamps for general lighting services Part 2: Minimum energy performance standards (MEPS) requirements. Performance of electrical lighting equipment Ballasts for fluorescent lamps Part 1: Method of measurement to determine energy consumption and performance of ballast-lamp circuits. Performance of electrical lighting equipment Ballasts for fluorescent lamps Part 2: Energy labelling and minimum energy performance standards requirement. Tungsten filament lamps for domestic and similar general lighting purposes Performance requirements. Energy efficiency of electric lamps for household use Measurement methods. Household electrical appliances Measurement of standby power. Electrical and electronic household and office equipment Measurement of low power consumption. Period of validity: to Date of issue: /41

26 EN 50563:2011+ A1:2013 DIN EN 50563:2014 VDE :2014 AS/NZS 62301:2005 EN 153:2006 DIN EN 153:2006 ISO 15502:2005 EN ISO 15502: 2005 DIN EN ISO 15502:2005 IEC 62552:2007 EN 62552:2013 DIN EN 62552:2013 VDE :2013 External a.c. d.c. and a.c. a.c. power supplies Determination of no-load power and average efficiency of active modes. Household electrical appliances Measurement of standby power. Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics. Household refrigerating appliances Characteristics and test methods. Household refrigerating appliances Characteristics and test methods. IEC :2015 Household refrigerating appliances Characteristics and test methods Part 1: General requirements. IEC :2015 Household refrigerating appliances Characteristics and test methods Part 2: Performance requirements. IEC :2015 Household refrigerating appliances Characteristics and test methods Part 3: Energy consumption and volume. AS/NZS : A2:2011 AS/NZS :2009 +A1:2011 Performance of household electrical appliances Refrigerating appliances Part 1: Energy consumption and performance. Performance of household electrical appliances Refrigerating appliances Part 2: Energy labelling and minimum energy performance standard requirements. Period of validity: to Date of issue: /41

27 SASO 2664:2013 Energy Performance and Capacity and Labeling of Household Refrigerators, Refrigerator-Freezers and Freezers. IEC 60530:1975 Methods for measuring the performance of electric kettles and jugs for household and similar use. IEC TR 61592:2003 Household electrical appliances Guidelines for consumer panel testing. IEC 61923:1997 Household electrical appliances Method of measuring performance Assessment of repeatability and reproducibility. EN 50301:2001 DIN EN 50301:2001 Methods of measurement for the power consumption of audio, video and related equipment. IEC 62087:2008 EN 62087: 2009 DIN EN 62087:2010 VDE :2010 Methods of measurement for the power consumption of audio, video and related equipment. AS/NZS : A1:2012 Power consumption of audio, video and related equipment Part 2.2: Minimum energy performance standards (MEPS) and energy rating label requirements for television sets. AS/NZS : A1:2009 Performance of external power supplies Part 1: Test method and energy performance mark. AS/NZS : A1:2009 Performance of external power supplies Part 2: Minimum energy performance standards (MEPS) requirements. External Power Supplies Revision 2.0 External Power Supplies IEMP CFR Part 430 External power supplies ENERGY STAR Program Requirements for Single Voltage External Ac-Dc and Ac-Ac Power Supplies. International Efficiency Marking Protocol for External Power Supplies, Version 3.0 Energy Conservation Program: Energy Conservation Standards for External Power Supplies. Audio/Video Version 3.0 ENERGY STAR Program Requirements for Audio/Video. Period of validity: to Date of issue: /41

28 Displays Version 7.0 ENERGY STAR Program Requirements for Displays. IES LM Electrical and Photometric Measurements of Solid- State Lighting Products. CIE S 025/E:2015 EN :2015 IS 16106:2012 IES LM Test Method for LED Lamps, LED Luminaires and LED Modules Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires Method of Electrical and Photometric Measurements of Solid State Lighting (LED) Products Measuring Lumen Maintenance of LED Lighting Sources. IES LM IES TM Approved Method: Measuring Luminous Flux and Color Maintenance of LED Packages, Arrays and Modules Projecting Long Term Lumen Maintenance of LED Light Sources. IES TM IES TM IES Standard Format for the Electronic Transfer of Spectral Data Projecting Long-Term Luminous Flux Maintenance of LED Lamps and Luminaires. IES TM Lamp Version 1.1 IES Method for Evaluating Lighting Source Color Rendition ENERGY STAR Program Requirements Product Specification for Lamp (Light Bulbs) Eligibility Criteria Version 1.1. Lamp Version 2.0 CIE Publication No ENERGY STAR Program Requirements Product Specification for Lamps (Light Bulbs) Eligibility Criteria Version 2.0 Method of Measuring and Specifying Colour Rendering Properties of Light Sources. CIE Publication No CIE Publication No. 84: 1989 Colorimetry The Measurement of Luminous Flux. Period of validity: to Date of issue: /41

29 IES LM IES LM IES LM IES LM Approved Method: Life Testing of Compact Fluorescent Lamps. Approved Method: Electrical and Photometric Measurements of Single-Ended Compact Fluorescent Lamps. ANSI C IEEE Recommended Practice on Characterization of Surges in Low Voltage (1000 V and Less) AC Power Circuits. ANSI C American National Standard for electric lamps Specifications for the Chromaticity of Fluorescent Lamps. ANSI C American National Standard for electric lamps Specifications for the Chromaticity of Solid State Lighting Products. ANSI C American National Standard for Lamp Ballasts Method of Measurement of Fluorescent Lamp Ballasts Clause ANSI C American National Standard Harmonic Emission Limits Related Power Quality Requirements for Lighting Equipment. ANSI C :2014 American National Standard for Lighting Equipment Harmonic Emission Limits Related Power Quality Requirements. ENERGY STAR Online CBCP Tool Ambient Temperature Life Test Elevated Temperature Life Test Elevated Temperature Light Output Ratio (ETLOR) Tool for Calculating Minimum Center Beam Intensity. ENERGY STAR Program Requirements for Lamps: Ambient Temperature Life Test Method, September 2015 ENERGY STAR Program Requirements for Lamps: Elevated Temperature Life Test Method, September 2015 ENERGY STAR Program for Lamps: Elevated Temperature Light Output Ratio Test Method, September 2015 Period of validity: to Date of issue: /41

30 Start Time Test ENERGY STAR Program Requirements Product Specification for Lamps Version 1.0: Start Time, September 2015 Start Time Test ENERGY STAR Program Requirements for Lamps and Luminaires: Start Time Test Method, September 2015 Run-Up Time Test ENERGY STAR Program Requirements for Lamps and Luminaires: Run-Up Time Test Method, September 2015 Light Output on a Dimmer Test ENERGY STAR Program Requirements Product Specification for Lamps: Light Output on a Dimmer Recommended Practice, September 2015 Light Source Flicker Test ENERGY STAR Program Requirements Product Specification for Lamps: Light Source Flicker Recommended Practice, September CFR 429 Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment. 10 CFR 430 Appendix W to Subpart B Luminaries Version 1.2 Luminaries Version 2.0 Energy Conservation Program for Consumer Products. ENERGY STAR Program Requirements Product Specification for Luminaires (Light Fixtures) Eligibility Criteria Version 1.2. ENERGY STAR Program Requirements Product Specification for Luminaires (Light Fixtures) Eligibility Criteria Version 2.0. ANSI C American National Standard for electric lamps Specifications for Performance of Self-ballasted Compact Fluorescent Lamps. ANSI C American National Standard for electric lamps High Intensity Discharge Methods of Measuring Characteristics. ANSI C American National Standard for lamp balllasts Ballasts for High Intensity Discharge (HID) Lamps Methods of Measurement. Period of validity: to Date of issue: /41

31 IES LM-9-09 IES Approved Method for the Electrical and Photometric Measurement of Fluorescent Lamps. IES LM IESNA Approved Method for Photometric Testing of Outdoor Fluorescent Luminaires. IES LM IES LM IES LM IES Approved method: Phototometry of reflector type lamps Photometric Testing of Roadway Luminaires Using Incandescent Filament and High Intensity Discharge Lamps. Approved Method: Life Testing of Fluorescent Lamps. IES LM Approved Method: Photometric Testing of Indoor Fluorescent Luminaries. IES LM Approved method: The Electrical and Photometric Measurement of General Service Incandescent Filament lamps; IES LM IESNA Approved Method for Photometric Testing of Indoor Luminaires Using High Intensity Discharge or Incandescent Filament Lamps. IES LM Approved Method: Life Testing of High Intensity Discharge (HID) Lamps. IES LM Approved Method: Life Testing of Incandescent Filament Lamps. IES LM IES Approved Method for the Electrical and Photometric Measurements of High Intensity Discharge Lamps. IES LM Approved Method: Spectroradiometric Measurement Methods for Light Sources. IES LM Approved Method: Characterization of LED Light Engines and LED Lamps for Electrical and Photometric Properties as a Function of Temperature. IES LM Approved Method: Measuring Luminous Flux and Color Maintenance of LED Lamps, Light Engines, and Luminaries. Period of validity: to Date of issue: /41

32 IEEE DOE 81 FR UL 153:2002 UL 153:2014 UL 1574:2004 UL 1598:2008 UL 1598C:2014 IEC 62384:2011 IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers Energy Conservation Program: Test Procedure for Integrated Light-Emitting Diode Lamps Standard for Safety of Portable Electric Luminaires (test section A only) Standard for Safety of Portable Electric Luminaires (test section only) Standard for Safety of Track Lighting system (test section 54 only) Standard for Safety of Luminaires (test section 19.7, only) Lighting-Emitting Diode(LED) Retrofit Luminaire Con Kits DC or AC supplied electronic control gear for LED modules Performance requirements. Limitation: Excluding the measurement of the impedance at audio-frequencies according to clause 11. Clause 9 for Compact Fluorescent Lamp:2014 Hongkong Code of Practice on Energy Efficiency Labelling Test method: IEC IEC 62612:2013 EN 62612:2013 DIN EN 62612:2014 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V -Performance requirements. ABNT IEC/PAS 62612: 2013 IS 16102(Part 2):2012 SASO-2870:2015 CAN/CSA C Self-ballasted LED lamps for general lighting services - Performance requirements. Self-ballasted Led Lamps for General Lighting Services Part 2 Performance Requirements Energy efficiency, functionality and labelling requirements for lighting products Part 1 Performance of Self-Ballasted Compact Fluorescent Lamps and Ballasted Adapters. CAN/CSA C Performance of Incandescent Reflector Lamps. Period of validity: to Date of issue: /41

33 Portaria INMETRO No. 389:2014 Ordinance INMETRO No. 143:2015 Ordinance INMETRO No. 144:2015 IEC 60879:1986 Residential Refrigerators and Freezers Version 5.0 Test method: 10 CFR 430 subpart B, Appendix A & B Test method: 10 CFR 430 subpart B, Appendix A1 & B1 Test method: 10 CFR & 64 ANSI/AHAM HRF Commercial Refrigerators and Freezers Version 2.1 INMETRO requirements for safety, energy efficiency and electromagnetic compability of LED Lamps with integrated control device unit. Limitation: Excluding EMC-testing according to clause INMETRO ordinance for safety, energy efficiency and electromagnetic compability of LED Lamps with integrated control device unit. INMETRO ordinance for safety, energy efficiency and electromagnetic compability of LED Lamps with integrated control device unit. Performance and construction of electric circulating fans and regulators. ENERGY STAR Program Requirements Product Specification for Residential Refrigerators and Freezers Eligibility Criteria Version 5.0. Test Method for Measuring the Energy Consumption of Electric Refrigerators and Electric Refrigerator- Freezers. Test Method for Measuring the Energy Consumption of Electric Refrigerators and Electric Refrigerator- Freezers. Test Method for Measuring the Energy Consumption of Commercial Refrigerator Other commercial refrigerators, refrigerator, freezers, and freezers, with doors Other commercial refrigerators, refrigerator, freezers, and freezers, without doors. Uniform Test Method for Measuring the Consumption of Electric Refrigerators and Electric Refrigerator- Freezer Energy and Internal Volume of Refrigerating Appliances. ENERGY STAR Program Requirements Product Specification for Commercial Refrigerators and Freezers Eligibility Criteria Version 2.1. Period of validity: to Date of issue: /41

34 CAN/CAS-C Energy performance and capacity of household refrigerators, refrigerator-freezers, freezers, and wine chillers. CAN/CAS-C Energy performance and capacity of household refrigerators, refrigerator-freezers, freezers, and wine chillers. Clause 8 for Refrigerating Appliances:2010 Hongkong - Clause 8 for Refrigerating Appliances:2014 Clause 11 for Dehumidifier:2010 Hongkong Code of Practice on Energy Efficiency Labelling Test method: EN Hongkong Code of Practice on Energy Efficiency Labelling Test method: EN Hongkong Code of Practice on Energy Efficiency Labelling. ANSI/AHAM DH Association of Home Appliance Manufacturers Dehumidifiers. CEC (u) CAN/CSA-C External Power Supplies Battery Charging Systems Version 1.1 CEC (w- 2) CEC A-1 CEC A-2 CAN/CSA-C Battery Charging Systems CEC External power supplies. Test method for calculating the energy efficiency of single-voltage external ac-dc and ac-ac power supplies. ENERGY STAR Program Requirements Product Specification for Battery Charging Systems Eligibility Criteria Version 1.1. CEC Battery Charger Systems and Self Contained Lighting Controls. Appendix Y to Subpart B of Part 430 Uniform Test Method for Measuring the Energy Consumption of Battery Chargers. Non-Commercial Refrigerator, Refrigerator-Freezer, and Freezer. Commercial Refrigerator, Refrigerator-Freezer, and Freezer. Test method for determining the energy efficiency of battery-charging systems. Period of validity: to Date of issue: /41

35 Imaging Equipment Version 2.0 Computer Version 6.1 Internal Power Supplies Revision 6.6 Test method: 10 CFR 430, Subpart B Appendix Z CAN/CSA-C62301:07 Televisions Version 7.0 ENERGY STAR Program Requirements Product Specification for Imaging Equipment Version 2.0. ENERGY STAR Program Requirements Product Specification for Computer Version 6.1. Calculating the Energy Efficiency of Internal Ac-Dc and Dc-Dc Power Supplies Revision 6.6. Test Method for Measuring the Energy Consumption of External Power Supplies. Household electrical appliances Measurement of standby power. ENERGY STAR Program Requirements Product Specification for Televisions Eligibility Criteria Version 7.0. Limitation: Excluding the CEA procedure for DAM-testing (Download Acquisition Mode). Test method: 10 CFR 430 Subpart B Appendix H Test method for measuring the power consumption of television sets. Limitation: Excluding the CEA procedure for DAM-testing (Download Acquisition Mode). 7. Industrial Machinery B. Mechanical Safety 1. Sport equipment EN 12601:2010 ISO :1995 AS 2790:1989 ISO : 2016 IEC :2012 EN :2012 AS :2006 IEC :2010 EN :2011 AS :2006 EN :2010 EN 913: Reciprocating internal combustion engine driven generating sets Safety Reciprocating internal combustion engine driven alternating current generating sets Part 13: Safety Arc welding equipment Part 1: Welding power sources Arc welding equipment Part 6: Limited duty manual metal arc welding power sources Compressors and vacuum pumps Safety requirements Part 1: Air compressors Gymnastic equipment - General Period of validity: to Date of issue: /41