American National Standards

Size: px
Start display at page:

Download "American National Standards"

Transcription

1 PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY VOL. 48, #9 March 3, 2017 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 8 Final Actions Project Initiation Notification System (PINS) ANS Maintained Under Continuous Maintenance ANSI-Accredited Standards Developers Contact Information International Standards ISO and IEC Draft Standards ISO and IEC Newly Published Standards Proposed Foreign Government Regulations Information Concerning American National Standards Call for comment on proposals listed This section solicits public comments on proposed draft new American National Standards, including the national adoption of ISO and IEC standards as American National Standards, and on proposals to revise, reaffirm or withdraw approval of existing American National Standards. A draft standard is listed in this section under the ANSI-accredited standards developer (ASD) that sponsors it and from whom a copy may be obtained. Comments in connection with a draft American National Standard must be submitted in writing to the ASD no later than the last day of the comment period specified herein. Such comments shall be specific to the section(s) of the standard under review and include sufficient detail so as to enable the reader to understand the commenter's position, concerns and suggested alternative language, if appropriate. Please note that the ANSI Executive Standards Council (ExSC) has determined that an ASD has the right to require that interested parties submit public review comments electronically, in accordance with the developer s procedures. Ordering Instructions for "Call-for-Comment" Listings 1. Order from the organization indicated for the specific proposal. 2. Use the full identification in your order, including the BSR prefix; for example, Electric Fuses BSR/SAE J Include remittance with all orders. 4. BSR proposals will not be available after the deadline of call for comment. Comments should be addressed to the organization indicated, with a copy to the Board of Standards Review, American National Standards Institute, 25 West 43rd Street, New York, NY Fax: ; psa@ansi.org * Standard for consumer products 2017 by American National Standards Institute, Inc. ISSN ANSI members may reproduce for internal distribution. Journals may excerpt items in their fields

2 Comment Deadline: April 2, 2017 EMAP (Emergency Management Accreditation Program (30-Day Public Comment Period: Announcement of Limited Substantive Changes to an Approved American National Standard)) BSR/EMAP US&R 1-201x, Urban Search and Rescue Standards (revision and redesignation of ANSI/EMAP US&R-2016) Annex A-2 is a annex to the US&R Standard. The Standard outlines 7 programmatic areas with standards underneath that outline the necessary components of a comprehensive US&R team. The Annex A-2 is the only portion of the standard that is open for public comment. Click here to view these changes in full Send comments (with copy to psa@ansi.org) to: Nicole Ishmael, (859) , nishmael@csg.org NSF (NSF International) BSR/NSF 3-201x (i12r2), Commercial Warewashing Equipment (revision of ANSI/NSF ) This Standard applies to commercial dishwashing; glasswashing; and pot, pan, and utensil washing machines that wash their contents by applying sprays of detergent solutions with or without blasting media granules, and sanitize their contents by applying sprays of hot water or chemical sanitizing solutions. Stationary rack and conveyor machines are covered under this Standard. Click here to view these changes in full Send comments (with copy to psa@ansi.org) to: Allan Rose, (734) , arose@nsf.org RESNET (Residential Energy Services Network, Inc.) BSR/RESNET/ICC Addendum A-201x, Attics & Crawlspaces (revision of ANSI/RESNET/ICC Addendum A-201x) Revise Standard ANSI/RESNET/ICC to clarify the treatment of attics and crawlspaces in testing and calculations and to provide other clarifications essential to the implementation of the Standard. Click here to view these changes in full Send comments (with copy to psa@ansi.org) via RESNET's online comment form. See the links from webpage: TIA (Telecommunications Industry Association) BSR/TIA 606-C-201x, Administration Standard for Telecommunications Infrastructure (revision and redesignation of ANSI/TIA 606-B-2012) This Standard specifies administration systems for telecommunications infrastructure within buildings (including commercial, industrial, residential, and data center premises) and between buildings. This infrastructure may range in size from a building requiring a single telecommunications space (TS) and associated elements, to many TSs and associated elements in multiple campus locations. This Standard applies to administration of telecommunications infrastructure in existing, renovated, and new buildings. Click here to view these changes in full Send comments (with copy to psa@ansi.org) to: standards@tiaonline.org UL (Underwriters Laboratories, Inc.) BSR/UL X, Standard for Safety for Electric Signs (revision of ANSI/UL ) The following changes in requirements to the Standard for Electric Signs, UL 48, are being proposed: (1) New requirements for shipment of sign sections; (2) Standard reference for LED components and LED retrofit kits; (3) Revise title of section Click here to view these changes in full Send comments (with copy to psa@ansi.org) to: Heather Sakellariou, (847) , Heather.Sakellariou@ul.com Comment Deadline: April 17, 2017 ABYC (American Boat and Yacht Council) Standards Action - March 3, Page 2 of 37 pages BSR/ABYC H x, Jet Boats - Light Weight (revision of ANSI/ABYC H ) This standard is a guide for the design, construction, and maintenance of inboard water jet-propelled boats. Single copy price: $50.00 Obtain an electronic copy from: Order from: Send comments (with copy to psa@ansi.org) to: comments@abycinc.org ABYC (American Boat and Yacht Council) BSR/ABYC P x, Manual Hydraulic Steering Systems (revision of ANSI/ABYC P ) This standard is a guide for the design, construction, and installation for remote manual hydraulic steering systems, and their major components. Single copy price: $50.00 Obtain an electronic copy from: Order from: Send comments (with copy to psa@ansi.org) to: comments@abycinc.org ABYC (American Boat and Yacht Council) BSR/ABYC S x, Outboard Engine and Related Equipment Weights (revision of ANSI/ABYC S ) This industry conformity standard is a guide for outboard engine and related equipment weights for use in determining vessel capacity and flotation. Single copy price: $50.00 Obtain an electronic copy from: Order from: Send comments (with copy to psa@ansi.org) to: comments@abycinc.org

3 Standards Action - March 3, Page 3 of 37 pages ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.) BSR/ASHRAE Standard x, Methods for Performance Testing Positive Displacement Refrigerant Compressors and Condensing Units that Operate at Subcritical Pressures of the Refrigerant (revision of ANSI/ASHRAE Standard ) The scope of ASHRAE Standard R has been expanded to cover (a) multi-stage compressors in addition to single-stage compressors and (b) intermediate cooling or refrigerant injection in addition to liquid injection. The descriptions, equations, and figures have been revised to clarify the steps required to apply this standard. Single copy price: $35.00 Obtain an electronic copy from: technology/public-review-drafts Order from: standards.section@ashrae.org Send comments (with copy to psa@ansi.org) to: org/standards-research--technology/public-review-drafts ASPE (American Society of Plumbing Engineers) BSR/WQA/ASPE/NSF S x, Sustainable Treatment Media for Drinking Water Applications (revision and redesignation of ANSI/WQA/ASPE/NSF S ) The scope of this voluntary product sustainability certification standard includes activated carbon and ion exchange resin (or blends thereof) commonly utilized in the treatment of drinking water for any of the following end-use applications: point of use (POU) systems or products, point of entry (POE) systems, commercial/industrial systems, and municipal supplies. The requirements of this standard shall be applicable to all production facilities, owned or controlled by the applicant company, encompassing all phases of production. This standard will be applicable globally, and may be applied to certification of applicable products by any qualified certification body. Single copy price: Free Order from: Gretchen Pienta, (708) , gpienta@aspe.org Send comments (with copy to psa@ansi.org) to: Same ASQ (ASC Z1) (American Society for Quality) New National Adoption BSR/ASQ/ISO/TS 9002:2016, Quality management systems - Guidelines for the application of ISO 9001:2015 (identical national adoption of ISO/TS 9002:2016) Provides guidance on the intent of the requirements in ISO 9001:2015, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements. This document does not prescribe mandatory approaches to implementation, or provide any preferred method of interpretation. Single copy price: $ Obtain an electronic copy from: standards@asq.org Order from: Julie Sharp, (414) , standards@asq.org Send comments (with copy to psa@ansi.org) to: Same ASSE (Safety) (American Society of Safety Engineers) BSR/ASSE Z X, Safe Practices for Motor Vehicle Operations (revision of ANSI/ASSE Z ) This standard sets forth practices for the safe management and operation of motor vehicles owned or operated by organizations. These practices are designed for use by those having the responsibility for the administration and operation of motor vehicles for organizational business. Single copy price: $77.00 Order from: Lauren Bauerschmidt, (847) , lbauerschmidt@asse.org Send comments (with copy to psa@ansi.org) to: Same AWS (American Welding Society) Reaffirmation BSR/AWS A5.7/A5.7M-2007 (R201x), Specification for Copper and Copper- Alloy Bare Welding Rods and Electrodes (reaffirmation of ANSI/AWS A5.7/A5.7M-2007) This specification prescribes requirements for the classification of copper and copper-alloy bare welding rods and electrodes for plasma arc, gas metal arc, and gas tungsten arc welding. It includes compositions in which the copper content exceeds that of any other element. Single copy price: $36.50 Obtain an electronic copy from: gupta@aws.org Order from: Rakesh Gupta, (305) , x 301, gupta@aws.org Send comments (with copy to psa@ansi.org) to: Same AWS (American Welding Society) BSR/AWS G2.3M/G x, Guide for the Joining of Solid Solution Austenitic Stainless Steels (revision of ANSI/AWS G2.3M/G ) This guide presents a description of solid solution austenitic stainless steels and the processes and procedures that can be used for the joining of these materials. This standard discusses the welding processes and welding parameters, qualifications, inspection and repair methods, cleaning, and safety considerations. Single copy price: $46.00 Obtain an electronic copy from: sborrero@aws.org Order from: sborrero@aws.org Send comments (with copy to psa@ansi.org) to: adavis@aws.org BOMA (Building Owners and Managers Association) BSR/BOMA Z x, Office Buildings: Standard Methods of Measurement (revision of ANSI/BOMA Z ) Since 1915, BOMA International has published the office floor measurement standard. The standard has evolved over time and is known as the preeminent standard for calculating areas in Office Buildings. The application of the standard produces areas vital to lease transactions and building valuation in a consistent manner, regardless of geographic location, building architecture, or the practitioner who applies it. The BOMA 2017 Office Standard features two distinct methods of measurement called Method A - Multiple Load Factor Method and Method B - Single Load Factor Method. Single copy price: Free Obtain an electronic copy from: tjohnston@boma.org Order from: Tanner Johnston, (202) , tjohnston@boma.org Send comments (with copy to psa@ansi.org) to: Same

4 Standards Action - March 3, Page 4 of 37 pages CSA (CSA Group) New Standard BSR/CSA NGV x, Standard for Compressed Natural Gas Vehicle (NGV) fueling appliances (new standard) This Standard details mechanical, physical, and electrical requirements for a newly manufactured appliance that dispenses natural gas for vehicles directly into the vehicle natural gas fuel storage systems from natural gas distribution systems or supply systems other than residential gas systems, referred to as vehicle fueling appliances (VFA). (NOTE: Residential fueling appliances (RFA) are addressed in CSA Standard NGV 5.1.) These requirements apply to compressed natural gas appliances for installation in commercial, non-residential locations and non-retail fueling facilities. Single copy price: Free Obtain an electronic copy from: cathy.rake@csagroup.org Order from: Julie Cairnes, (216) x8213, julie.cairns@csa-america. org Send comments (with copy to psa@ansi.org) to: Cathy Rake, (216) x88321, cathy.rake@csagroup.org NEMA (ASC C78) (National Electrical Manufacturers Association) BSR C X, Electric Lamps: Specifications for the Chromaticity of Solid-State Lighting Products (revision of ANSI C ) The purpose of this standard is to specify the range of chromaticities recommended for general lighting with solid state lighting (SSL) products, as well as to ensure that the white light chromaticities of the products can be communicated to consumers. This standard applies to LED lamps, LED light engines and LED luminaires for general indoor lighting applications. This document does not apply to lighting fixtures sold without a light source. This standard does not apply to SSL products for outdoor applications. This standard also does not apply to SSL products for some indoor applications that intentionally produce tinted or colored light. This document does not include OLED products. Single copy price: $ Order from: Michael Erbesfeld, , Michael.Erbesfeld@nema.org Send comments (with copy to psa@ansi.org) to: Same EOS/ESD (ESD Association, Inc.) BSR/ESD S x, ESD Association Standard for the Protection of Electrostatic Discharge Susceptible Items - Symbols - ESD Awareness (revision of ANSI/ESD S ) Three symbols are covered in this document. The first indicates that an electrical or electronic device or assembly is susceptible to damage from an ESD event if not properly handled. The second indicates that the material or product on which the symbol is displayed is intended to provide some level of protection to ESD susceptible devices or assemblies. The third indicates the location of an ESD common point ground terminal or connection point. The application of these ESD symbols on products is at the discretion of the supplier and does not constitute or imply a specific level of product performance. Single copy price: $ (List)/$75.00 (ESD Members) [Hardcopy]; $ (List)/$ (ESD Members) [Softcopy] Obtain an electronic copy from: cearl@esda.org Order from: Christina Earl, (315) , cearl@esda.org Send comments (with copy to psa@ansi.org) to: Same ISEA (International Safety Equipment Association) New Standard BSR/ISEA x, Secondary Single-Use Flame Resistant Protective Clothing for Use Over Primary Flame Resistant Protective Clothing (new standard) This standard establishes minimum performance and labeling requirements for single-use secondary flame-resistant protective clothing, designed for use in industrial settings where flame hazards may exist and such clothing will not negatively impact the thermal performance afforded by the primary flame resistant protective clothing worn underneath. Protective clothing covered by this standard includes items such as, but not limited to, encapsulating suits, coveralls, jackets, pants, lab coats, aprons, and sleeves. Single copy price: Free Obtain an electronic copy from: cfargo@safetyequipment.org Order from: Cristine Fargo, (703) , cfargo@safetyequipment.org Send comments (with copy to psa@ansi.org) to: Same SCTE (Society of Cable Telecommunications Engineers) BSR/SCTE x, Modular Head End Architecture - Part 2: M-CMTS Downstream External PHY Interface (revision of ANSI/SCTE ) This specification is part of the DOCSIS family of specifications, and in particular, is part of a series of specifications that define a Modular Cable Modem Termination System (M-CMTS ) architecture for head-end components that comply with DOCSIS. This specification was developed for the benefit of the cable industry, and includes contributions by operators and vendors from North America, Europe, and other regions. Single copy price: $50.00 Obtain an electronic copy from: Order from: Kim Cooney, (800) , kcooney@scte.org Send comments (with copy to psa@ansi.org) to: standards@scte.org SCTE (Society of Cable Telecommunications Engineers) BSR/SCTE x, Modular Head End Architecture - Part 3: Operations Support System Interface (revision of ANSI/SCTE ) This specification defines the Network Management requirements to support a Modular Cable Modem Termination System (M-CMTS ) for headend components compliant to DOCSIS. The purpose of this document is to define the management requirements for the M-CMTS architecture that enables an effective operation of the M-CMTS components. Single copy price: $50.00 Obtain an electronic copy from: Order from: Global Engineering Documents, (800) , ihs.com Send comments (with copy to psa@ansi.org) to: standards@scte.org

5 Standards Action - March 3, Page 5 of 37 pages SCTE (Society of Cable Telecommunications Engineers) BSR/SCTE x, Modular Head End Architecture - Part 4: Edge Resource Manager Interface (revision of ANSI/SCTE ) This document specifies interfaces that are used by Edge QAM devices (EQAMs), Edge Resource Managers (ERMs) and M-CMTS Cores within the context of a Modular Cable Modem Termination System (M CMTS). Single copy price: $50.00 Obtain an electronic copy from: Order from: Global Engineering Documents, (800) , ihs.com Send comments (with copy to psa@ansi.org) to: standards@scte.org SCTE (Society of Cable Telecommunications Engineers) BSR/SCTE x, Modular Head End Architecture - Part 5: Edge QAM Provisioning and Management Interface (revision of ANSI/SCTE ) This specification is a component of the Modular Headend Architecture; in particular, it defines the Provisioning and Management requirements for the EQAM device. Single copy price: $50.00 Obtain an electronic copy from: Order from: Global Engineering Documents, (800) , ihs.com Send comments (with copy to psa@ansi.org) to: standards@scte.org SCTE (Society of Cable Telecommunications Engineers) BSR/SCTE x, Modular Head End Architecture - Part 6: Edge QAM Video Stream Interface (revision of ANSI/SCTE ) This specification is a component of the Modular Headend Architecture. In particular, it defines the data plane requirements for receiving, processing, and transmitting MPEG transport streams in EQAMs, compliant with the Video EQAM or Universal EQAM profiles described in the Architectural Overview of the Modular Headend Architecture. Single copy price: $50.00 Obtain an electronic copy from: Order from: Global Engineering Documents, (800) , ihs.com Send comments (with copy to psa@ansi.org) to: standards@scte.org SCTE (Society of Cable Telecommunications Engineers) BSR/SCTE x, Modular Head End Architecture - Part 7: EQAM Architectural Overview Technical Report (revision of ANSI/SCTE ) This Architectural Overview Technical Report is intended to provide an introduction to the Modular Headend Architecture, with particular emphasis on the EQAM as a key component. This document describes the various architectural entities and the interfaces that connect them, provides an overview of the various profiles of EQAM devices and their operations, and discusses the various specifications that contain normative requirements pertaining to the Modular Headend Architecture. Single copy price: $50.00 Obtain an electronic copy from: Order from: Global Engineering Documents, (800) , ihs.com Send comments (with copy to psa@ansi.org) to: standards@scte.org TIA (Telecommunications Industry Association) New National Adoption BSR/TIA x, Automated Infrastructure Management (AIM) Systems - Requirements, Data Exchange and Applications (national adoption with modifications of ISO/IEC 18598) This standard specifies the requirements and recommendations for the attributes of Automated Infrastructure Management (AIM) systems, explains how AIM systems can contribute to operational efficiency, and specifies a framework of requirements and recommendations for data exchange with other systems. Single copy price: $99.00 Obtain an electronic copy from: TIA Order from: TIA, standards@tiaonline.org Send comments (with copy to psa@ansi.org) to: standards@tiaonline.org UAMA (ASC B7) (Unified Abrasives Manufacturers' Association) BSR B x, Safety Requirements for the Use, Care and Protection of Abrasive Wheels (revision of ANSI B ) This safety standard sets forth requirements for the safe use, care and protection of abrasive wheels and the machines for which they are designed. Included in this standard are the requirements for wheel guards; flanges; chucks; and proper storage, handling and mounting techniques. Single copy price: $3.00 (UAMA Members); $75.00 (non-members) Obtain an electronic copy from: sab@wherryassoc.com Order from: sab@wherryassoc.com Send comments (with copy to psa@ansi.org) to: jjw@wherryassoc.com UL (Underwriters Laboratories, Inc.) Reaffirmation BSR/UL (R201x), Standard for Safety for Hybrid Personal Flotation Devices (reaffirmation of ANSI/UL ) UL proposes a reaffirmation for UL Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: Order from: comm2000 Send comments (with copy to psa@ansi.org) to: Griff Edwards, , griff.edwards@ul.com UL (Underwriters Laboratories, Inc.) Reaffirmation BSR/UL (R201x), Standard for Safety for Explosive Atmospheres - Part 15: Equipment Protection by Type of Protection "n" (Proposal dated ) (reaffirmation of ANSI/UL ) Reaffirmation and Continuance of the Fourth Edition of the Standard for Explosive Atmospheres - Part 15: Equipment Protection by Type of Protection n, UL , as an American National Standard. Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: Order from: comm2000 Send comments (with copy to psa@ansi.org) to: Vickie Hinton, (919) , Vickie.T.Hinton@ul.com

6 Standards Action - March 3, Page 6 of 37 pages UL (Underwriters Laboratories, Inc.) BSR/UL 746C-201x, Standard for Safety for Polymeric Materials - Use in Electrical Equipment Evaluations (revision of ANSI/UL 746C-2016) This proposal represents a clarification of HWI PLC-0 Determination in Table 6.1. Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: Order from: comm2000 Send comments (with copy to psa@ansi.org) to: Derrick Martin, (510) , Derrick.L.Martin@ul.com UL (Underwriters Laboratories, Inc.) BSR/UL x, Standard for Residential Sprinklers for Fire-Protection Service (revision of ANSI/UL ) (1) to allow for a rated coverage area of 15 ft. by 15 ft; (2) s to more closely align text with NFPA and other sprinkler standards, clarify requirement, and update testing details; (3) New air bath test for glass bulb sprinklers; (4) Protection of glass bulb tips. Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: Order from: comm2000 Send comments (with copy to psa@ansi.org) to: Mark Ramlochan, (613) , Mark.Ramlochan@ul.com Comment Deadline: May 2, 2017 ITI (INCITS) (InterNational Committee for Information Technology Standards) New National Adoption INCITS/ISO/IEC 27010:2015, Information technology - Security techniques - Information security management for inter-sector and inter-organizational communications (identical national adoption of ISO/IEC 27010:2015 and revision of INCITS/ISO/IEC 27010:2012 [2014]) Provides guidelines in addition to the guidance given in the ISO/IEC family of standards for implementing information security management within information sharing communities. Provides controls and guidance specifically relating to initiating, implementing, maintaining, and improving information security in inter-organizational and inter-sector communications. It provides guidelines and general principles on how the specified requirements can be met using established messaging and other technical methods. Single copy price: $ Obtain an electronic copy from: Order from: Send comments (with copy to psa@ansi.org) to: comments@standards. incits.org ITI (INCITS) (InterNational Committee for Information Technology Standards) New National Adoption INCITS/ISO/IEC 27039:2015, Information technology - Security techniques - Selection, deployment and operations of intrusion detection and prevention systems (IDPS) (identical national adoption of ISO/IEC 27039:2015) Provides guidelines to assist organizations in preparing to deploy intrusion detection and prevention systems (IDPS). In particular, it addresses the selection, deployment, and operations of IDPS. It also provides background information from which these guidelines are derived. Single copy price: $ Obtain an electronic copy from: Order from: Send comments (with copy to psa@ansi.org) to: comments@standards. incits.org ITI (INCITS) (InterNational Committee for Information Technology Standards) New National Adoption INCITS/ISO/IEC 27040:2015, Information technology - Security techniques - Storage security (identical national adoption of ISO/IEC 27040:2015) Provides detailed technical guidance on how organizations can define an appropriate level of risk mitigation by employing a well-proven and consistent approach to the planning, design, documentation, and implementation of data storage security. Storage security applies to the protection (security) of information where it is stored and to the security of the information being transferred across the communication links associated with storage. Storage security includes the security of devices and media, the security of management activities related to the devices and media, the security of applications and services, and security relevant to end-users during the lifetime of devices and media and after end of use. Single copy price: $ Obtain an electronic copy from: Order from: Send comments (with copy to psa@ansi.org) to: comments@standards. incits.org ITI (INCITS) (InterNational Committee for Information Technology Standards) New National Adoption INCITS/ISO/IEC 27041:2015, Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method (identical national adoption of ISO/IEC 27041:2015) Provides guidance on mechanisms for ensuring that methods and processes used in the investigation of information security incidents are "fit for purpose". It encapsulates best practice on defining requirements, describing methods, and providing evidence that implementations of methods can be shown to satisfy requirements. It includes consideration of how vendor and third-party testing can be used to assist this assurance process. Single copy price: $ Obtain an electronic copy from: Order from: Send comments (with copy to psa@ansi.org) to: comments@standards. incits.org

7 Standards Action - March 3, Page 7 of 37 pages ITI (INCITS) (InterNational Committee for Information Technology Standards) New National Adoption INCITS/ISO/IEC 27043:2015, Information technology - Security techniques - Incident investigation principles and processes (identical national adoption of ISO/IEC 27043:2015) Provides guidelines based on idealized models for common incident investigation processes across various incident investigation scenarios involving digital evidence. This includes processes from pre-incident preparation through investigation closure, as well as any general advice and caveats on such processes. The guidelines describe processes and principles applicable to various kinds of investigations, including, but not limited to, unauthorized access, data corruption, system crashes, or corporate breaches of information security, as well as any other digital investigation. Single copy price: $ Obtain an electronic copy from: Order from: Send comments (with copy to psa@ansi.org) to: comments@standards. incits.org ITI (INCITS) (InterNational Committee for Information Technology Standards) New Standard BSR INCITS x, Information technology - Fibre Channel - Link Services - 3 (FC-LS-3) (new standard) Fibre Channel Extended Link Services provide a invaluable service for management and control of Fibre Channel systems. This project proposal recommends the development of additional and enhanced Extended Link Services functions to the Extended Link Services defined in the FC-LS standard. The specific goals of the FC-LS-3 standard are: Incorporate new ELSs required for FC-BB-6 (FCoE and other protocols), and FCEE. Single copy price: Free Obtain an electronic copy from: org/apps/group_public/document.php?document_id=85668&wg_abbrev=eb Order from: document_id=85668&wg_abbrev=eb Send comments (with copy to psa@ansi.org) to: comments@standards. incits.org Projects Withdrawn from Consideration An accredited standards developer may abandon the processing of a proposed new or revised American National Standard or portion thereof if it has followed its accredited procedures. The following projects have been withdrawn accordingly: ITI (INCITS) (InterNational Committee for Information Technology Standards) BSR INCITS x, Information technology - SCSI over PCIe (R) architecture-2 (new standard) Inquiries may be directed to Lynn Barra, (202) , comments@itic.org

8 Standards Action - March 3, Page 8 of 37 pages Call for Members (ANS Consensus Bodies) Directly and materially affected parties who are interested in participating as a member of an ANS consensus body for the standards listed below are requested to contact the sponsoring standards developer directly and in a timely manner. ASHRAE (American Society of Heating, Refrigerating and Air- Conditioning Engineers, Inc.) Office: 1791 Tullie Circle NE Atlanta, GA Phone: Fax: Tanisha Meyers-Lisle (678) (678) tmlisle@ashrae.org BSR/ASHRAE Standard X, Standard Methods for Pressure Measurement (revision of ANSI/ASHRAE Standard ) BSR/ASHRAE Standard X, Standard Methods for Measurement of Proportion of Lubricant in Liquid Refrigerant (revision of ANSI/ASHRAE Standard ) BSR/ASHRAE Standard X, Standard Methods for Humidity Measurement (revision of ANSI/ASHRAE Standard ) BSR/ASHRAE Standard X, Standard Methods for Power Measurement (revision of ANSI/ASHRAE Standard ) B11 (B11 Standards, Inc.) Office: Phone: PO Box Houston, TX Chris Felinski (571) cfelinski@b11standards.org BSR B X, Safety Requirements for ElectroDischarge Machines (national adoption with modifications of ISO 28881) IESNA (Illuminating Engineering Society of North America) Office: Phone: 120 Wall St. 17th Floor New York, NY Patricia McGillicuddy (212) pmcgillicuddy@ies.org BSR/IES/ALA RP x, Lighting for Interior and Exterior Environments (new standard) ASQ (ASC Z1) (American Society for Quality) Office: Phone: 600 N Plankinton Ave Milwaukee, WI Julie Sharp (414) standards@asq.org BSR/ASQ/ISO/TS 9002:2016, Quality management systems - Guidelines for the application of ISO 9001:2015 (identical national adoption of ISO/TS 9002:2016) ASSE (Safety) (American Society of Safety Engineers) Office: Phone: 520 N. Northwest Hwy Park Ridge, IL Lauren Bauerschmidt (847) lbauerschmidt@asse.org BSR/ASSE Z X, Safe Practices for Motor Vehicle Operations (revision of ANSI/ASSE Z ) BSR/ASSE Z X, Accepted Practices for Virtual Training in Occupational Safety, Health, and Environmental Management. (new standard) ISEA (International Safety Equipment Association) Office: Phone: Fax: 1901 North Moore Street Suite 808 Arlington, VA Cristine Fargo (703) (703) cfargo@safetyequipment.org BSR/ISEA x, Secondary Single-Use Flame Resistant Protective Clothing for Use Over Primary Flame Resistant Protective Clothing (new standard) ITI (INCITS) (InterNational Committee for Information Technology Standards) Office: 1101 K Street NW Suite 610 Washington, DC Phone: Fax: Rachel Porter (202) comments@itic.org BSR INCITS x, Information technology - Fibre Channel - Link Services - 3 (FC-LS-3) (new standard) BSR INCITS x, Information technology - SCSI Enclosure Services - 4 (SES-4) (new standard)

9 Standards Action - March 3, Page 9 of 37 pages INCITS/ISO/IEC 27010:2015, Information technology - Security techniques - Information security management for inter-sector and inter-organizational communications (identical national adoption of ISO/IEC 27010:2015 and revision of INCITS/ISO/IEC 27010:2012 [2014]) INCITS/ISO/IEC 27039:2015, Information technology - Security techniques - Selection, deployment and operations of intrusion detection and prevention systems (IDPS) (identical national adoption of ISO/IEC 27039:2015) INCITS/ISO/IEC 27040:2015, Information technology - Security techniques - Storage security (identical national adoption of ISO/IEC 27040:2015) INCITS/ISO/IEC 27041:2015, Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method (identical national adoption of ISO/IEC 27041:2015) INCITS/ISO/IEC 27043:2015, Information technology - Security techniques - Incident investigation principles and processes (identical national adoption of ISO/IEC 27043:2015) TIA (Telecommunications Industry Association) Office: Phone: Fax: 1320 North Courthouse Road Suite 200 Arlington, VA Teesha Jenkins (703) (703) standards@tiaonline.org BSR/TIA 606-C-201x, Administration Standard for Telecommunications Infrastructure (revision and redesignation of ANSI/TIA 606-B-2012) BSR/TIA x, Automated Infrastructure Management (AIM) Systems - Requirements, Data Exchange and Applications (national adoption with modifications of ISO/IEC 18598) UAMA (ASC B7) (Unified Abrasives Manufacturers' Association) Office: Phone: Fax: Detroit Road Cleveland, OH Donna Haders (440) (440) djh@wherryassoc.com BSR B x, Safety Requirements for the Use, Care and Protection of Abrasive Wheels (revision of ANSI B )

10 Standards Action - March 3, Page 10 of 37 pages Call for Members (ANS Consensus Bodies) Call for Committee Members ASC O1 Safety Requirements for Woodworking Machinery Are you interested in contributing to the development and maintenance of valuable industry safety standards? The ASC O1 is currently looking for members in the following categories: o General Interest o Government o Producer o User If you are interested in joining the ASC O1, contact WMMA Associate Director Jennifer Miller at jennifer@wmma.org.

11 Standards Action - March 3, Page 11 of 37 pages Final Actions on American National Standards The standards actions listed below have been approved by the ANSI Board of Standards Review (BSR) or by an ANSI-Audited Designator, as applicable. ASC X9 (Accredited Standards Committee X9, Incorporated) Reaffirmation ANSI X (R2017), Cryptographic Message Syntax - ASN.1 and XML (reaffirmation of ANSI X ): 2/14/2017 ANSI X (R2017), Biometric Information Management & Security for the Financial Services Industry (reaffirmation of ANSI X ): 2/14/2017 ASCE (American Society of Civil Engineers) New Standard ANSI/ASCE/EWRI , Management Practices for Control of Erosion and Sediment from Construction Activities (new standard): 2/17/2017 ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.) Addenda ANSI/ASHRAE/ICC/IES/USGBC 189.1i-2017, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/USGBC/IES Standard ): 2/13/2017 ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1ab-2017, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/USGBC/IES Standard ): 2/13/2017 ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1n-2017, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/USGBC/IES Standard ): 2/13/2017 ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1p-2017, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/USGBC/IES Standard ): 2/13/2017 ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1t-2017, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/USGBC/IES Standard ): 2/13/2017 ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1u-2017, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/USGBC/IES Standard ): 2/13/2017 ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1x-2017, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/USGBC/IES Standard ): 2/13/2017 ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1y-2017, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/USGBC/IES Standard ): 2/13/2017 ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1z-2017, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/USGBC/IES Standard ): 2/13/2017 Reaffirmation ANSI/ASHRAE Standard (R2017), Methods of Testing for Efficiency of Space-Conditioning/Water Heating Appliances that Include a Desuperheater Water Heater (reaffirmation of ANSI/ASHRAE Standard ): 2/8/2017 ASME (American Society of Mechanical Engineers) New Standard ANSI/ASME PTC , Air Heaters (new standard): 2/14/2017 Reaffirmation ANSI/ASME B M-2009 (R2017), Threaded Rod (Metric Series) (reaffirmation of ANSI/ASME B M-2009): 2/14/2017 ANSI/ASME B , Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard (revision of ANSI/ASME B ): 2/14/2017 ASSE (Safety) (American Society of Safety Engineers) ANSI ASSE Z , Fundamentals Governing the Design and Operation of Dilution Ventilation Systems in Industrial Occupancies (revision and redesignation of ANSI AIHA Z ): 2/17/2017 ASTM (ASTM International) ANSI/ASTM E , Test Methods for Fire Tests of Roof Coverings (revision of ANSI/ASTM E ): 2/1/2017 ANSI/ASTM E , Test Method for Specific Optical Density of Smoke Generated by Solid Materials (revision of ANSI/ASTM E A): 2/1/2017 ANSI/ASTM E , Terminology for Accreditation and Certification (revision of ANSI/ASTM E ): 2/15/2017 ATIS (Alliance for Telecommunications Industry Solutions) Reaffirmation ANSI/ATIS (R2017), Operations, Administration, Maintenance, and Provisioning Security Requirements for the Public Telecommunications Network: A Baseline of Security Requirements for the Management Plane (reaffirmation of ANSI/ATIS ): 2/14/2017 AWS (American Welding Society) New Standard ANSI/AWS C7.6/C7.6M-2017, Process Specification and Operator Qualification for Laser Hybrid Welding (new standard): 2/16/2017

12 Standards Action - March 3, Page 12 of 37 pages * * * * AWWA (American Water Works Association) ANSI/AWWA C , Installation of Ductile-Iron Mains and Their Appurtenances (revision of ANSI/AWWA C ): 2/14/2017 ANSI/AWWA C151/A , Ductile-Iron Pipe, Centrifugally Cast (revision of ANSI/AWWA C151/A ): 2/14/2017 CPLSO New Standard ANSI/CPLSO , Proximity Warning Devices (new standard): 2/16/2017 MHI (ASC MHC) (Material Handling Industry) New Standard ANSI MH , Item Unique Identification (IUID) Data Matrix Encoding Guideline (new standard): 2/14/2017 MHI (Material Handling Industry) ANSI MH , Design, Testing and Utilization of Welded-Wire Rack Decking (revision of ANSI MH ): 2/17/2017 NSF (NSF International) ANSI/NSF (i12r1), Commercial Powered Food Preparation Equipment (revision of ANSI/NSF (i6)): 2/9/2017 ANSI/NSF (i123r1), Equipment for Swimming Pools, Spas, Hot Tubs and Other Recreational Water Facilities (revision of ANSI/NSF ): 2/10/2017 TCNA (ASC A108) (Tile Council of North America) New Standard ANSI A , Interior Installation of Gauged Porcelain Tiles and Gauged Porcelain Tile Panels/Slabs by the Thin-Bed Method bonded with Modified Dry-Set Cement Mortar or Improved Modified Dry-Set Cement Mortar (new standard): 2/16/2017 ANSI A , Standard Specifications for Gauged Porcelain Tiles and Gauged Porcelain Tile Panels/Slabs (new standard): 2/16/2017 ANSI A , Standard Specifications for Ceramic Tile (revision of ANSI A ): 2/16/2017 TIA (Telecommunications Industry Association) Reaffirmation * * * * * * ANSI/TIA (R2017), Telecommunications - Telephone Terminal Equipment - Receive Volume Control Requirements for Digital and Analog Wireline Terminals (reaffirmation of ANSI/TIA ): 2/16/2017 UL (Underwriters Laboratories, Inc.) New National Adoption ANSI/UL , Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls (national adoption of IEC with modifications and revision of ANSI/UL ): 2/14/2017 Reaffirmation ANSI/UL 497A-2004 (R2017), Standard for Safety for Secondary Protectors for Communications Circuits (reaffirmation of ANSI/UL 497A-2004 (R2012)): 2/10/2017 ANSI/UL 497B-2004 (R2017), Standard for Safety for Protectors for Data Communications and Fire Alarm Circuits (reaffirmation of ANSI/UL 497B-2004 (R2012)): 2/10/2017 ANSI/UL 497C-2004 (R2017), Standard for Safety for Protectors for Coaxial Communications Circuits (reaffirmation of ANSI/UL 497C (R2012)): 2/10/2017 ANSI/UL , Standard for Safety for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances (revision of ANSI/UL ): 2/17/2017 ANSI/UL , Standard for Safety for Commercial-Industrial Gas Burners (revision of ANSI/UL ): 2/8/2017 ANSI/UL a, Standard for Safety for Commercial-Industrial Gas Burners (revision of ANSI/UL ): 2/8/2017 ANSI/UL , Standard for Safety for Refrigerating Units (UL proposal 12/30/16) (revision of ANSI/UL ): 2/10/2017 ANSI/UL , Standard for Safety for Ice Cream Makers (UL proposal 12/09/16) (revision of ANSI/UL ): 2/15/2017 ANSI/UL , Standard for Safety for Household Electric Ranges (revision of ANSI/UL ): 2/8/2017 ANSI/UL a, Standard for Safety for Household Electric Ranges (revision of ANSI/UL ): 2/8/2016 ANSI/UL , Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type (revision of ANSI/UL ): 2/15/2017 ANSI/UL a, Standard for Safety for Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type (revision of ANSI/UL ): 2/15/2017 ANSI/UL , Standard for Safety for Suspended Ceiling Grid Low Voltage Systems and Equipment (revision of ANSI/UL ): 2/16/2017 ANSI/TIA C-2009 (R2017), Test Method for Evaluating Fungus Resistance of Optical Fiber and Cable (reaffirmation of ANSI/TIA C-2009): 2/16/2017 ANSI/TIA 968-B (R2017), Telephone Terminal Equipment - Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 1 (reaffirmation of ANSI/TIA 968-B ): 2/16/2017

13 Project Initiation Notification System (PINS) Standards Action - March 3, Page 13 of 37 pages ANSI Procedures require notification of ANSI by ANSI-accredited standards developers (ASD) of the initiation and scope of activities expected to result in new or revised American National Standards (ANS). Early notification of activity intended to reaffirm or withdraw an ANS and in some instances a PINS related to a national adoption is optional. The mechanism by which such notification is given is referred to as the PINS process. For additional information, see clause 2.4 of the ANSI Essential Requirements: Due Process Requirements for American National Standards. Following is a list of proposed actions and new ANS that have been received recently from ASDs. Please also review the section in Standards Action entitled "American National Standards Maintained Under Continuous Maintenance" for additional or comparable information with regard to standards maintained under the continuous maintenance option. To view information about additional standards for which a PINS has been submitted and to search approved ANS, please visit which is a database of standards information. Note that this database is not exhaustive. Directly and materially affected interests wishing to receive more information or to submit comments are requested to contact the standards developer directly within 30 days of the publication of this announcement. AAMI (Association for the Advancement of Medical Instrumentation) Office: 4301 N. Fairfax Dr., Suite 301 Arlington, VA Fax: Amanda Benedict (703) abenedict@aami.org BSR/AAMI ST79-201x, Comprehensive guide to steam sterilization and sterility assurance in health care facilities (revision of ANSI/AAMI ST (R2014) & A1 & A2 & A3 & A4) Stakeholders: Health-care facility sterile processing personnel, manufacturers of medical devices and sterilization and processing equipment, sterilization science professionals. Project Need: Update ST79 to reflect current technology and processes for steam sterilization and sterility assurance. This document includes guidance for sterile processing facility design, personnel, receiving, transporting, handling, cleaning, decontamination, preparation, packaging, steam sterilization of reusable medical devices, quality process improvement and new product evaluation. ASHRAE (American Society of Heating, Refrigerating and Air- Conditioning Engineers, Inc.) Office: 1791 Tullie Circle NE Atlanta, GA Fax: Tanisha Meyers-Lisle (678) tmlisle@ashrae.org BSR/ASHRAE Standard X, Standard Methods for Pressure Measurement (revision of ANSI/ASHRAE Standard ) Stakeholders: HVAC&R equipment producers and consumers, test labs, instrument manufacturers, and code and regulatory agencies. Project Need: To describe and reference a different uncertainty method. To update the standard as appropriate. To fully comply with ASHRAE's mandatory language requirements. The temperature measurement methods described herein are intended for use in testing heating, refrigerating, and air-conditioning equipment and components. BSR/ASHRAE Standard X, Standard Methods for Measurement of Proportion of Lubricant in Liquid Refrigerant (revision of ANSI/ASHRAE Standard ) Stakeholders: HVAC&R equipment producers and consumers, test labs, instrument manufacturers, and code and regulatory agencies. Project Need: To describe and reference a different uncertainty method. To update the standard as appropriate. To fully comply with ASHRAE's mandatory language requirements. The purpose of this standard is to prescribe methods for the measuring of the proportion of lubricant in liquid refrigerant. BSR/ASHRAE Standard X, Standard Methods for Humidity Measurement (revision of ANSI/ASHRAE Standard ) Stakeholders: HVAC&R equipment producers and consumers, test labs, instrument manufacturers, and code and regulatory agencies. Project Need: To describe and reference a different uncertainty method. To update the standard as appropriate. To fully comply with ASHRAE's mandatory language requirements. This standard prescribes methods for measuring the humidity of moist air with instruments. BSR/ASHRAE Standard X, Standard Methods for Power Measurement (revision of ANSI/ASHRAE Standard ) Stakeholders: HVAC&R equipment producers and consumers, test labs, instrument manufacturers, and code and regulatory agencies. Project Need: To describe and reference a different uncertainty method. To update the standard as appropriate. To fully comply with ASHRAE's mandatory language requirements. This standard applies to power measurements under laboratory and field conditions when testing heating, ventilating, air-conditioning, and refrigerating systems and components. ASME (American Society of Mechanical Engineers) Office: Fax: Two Park Avenue New York, NY Mayra Santiago (212) ansibox@asme.org BSR/ASME B x, Forged Eyebolts (revision of ANSI/ASME B ) Stakeholders: Manufacturers, users. Project Need: The Standard is being revised to address errors in several tables. This Standard is limited to dimensions and capacities for carbon steel and corrosion-resistant stainless steel, forged threaded eyebolts intended primarily for lifting applications. For carbon steel construction, the sizes are limited to 1/4 inch through 2-1/2 inches, and for corrosionresistant stainless steel construction, the sizes are limited to 1/4 inch through 1-1/2 inches.

14 Standards Action - March 3, Page 14 of 37 pages ASSE (Safety) (American Society of Safety Engineers) Office: 520 N. Northwest Hwy Park Ridge, IL Lauren Bauerschmidt lbauerschmidt@asse.org BSR/ASSE Z X, Accepted Practices for Virtual Training in Occupational Safety, Health, and Environmental Management (new standard) Stakeholders: Occupational safety and health professionals or those stakeholders involved with safety, health, and environmental training programs. Project Need: Based upon the consensus of the Z490 ASC, occupational safety and health professionals, and the ASSE leadership. This standard establishes criteria for safety, health, and environmental virtual training programs, including program management, development, delivery, evaluation, and documentation. ASTM (ASTM International) Office: Fax: 100 Barr Harbor Drive West Conshohocken, PA Corice Leonard (610) accreditation@astm.org BSR/ASTM WK x, New Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry (new standard) Stakeholders: General Requirements industry. Project Need: This guide provides injury and illness reporting criteria and terminology for maritime vessels and meets or exceeds U.S. Coast Guard casualty reporting requirements. B11 (B11 Standards, Inc.) Office: PO Box Houston, TX Chris Felinski cfelinski@b11standards.org BSR B X, Safety Requirements for ElectroDischarge Machines (national adoption with modifications of ISO 28881) Stakeholders: Machine users, distributors, and manufacturers. Project Need: There is no American National Standard on this machine type, yet many thousands are used in the United States. This American National Standard specifies safety requirements and/or risk reduction measures, applicable to EDM equipment and EDM systems. This standard deals with all significant hazards, hazardous situations or hazardous events relevant to EDM equipment and EDM systems, where they are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer. FCI (Fluid Controls Institute) Office: 1300 Sumner Avenue Cleveland, OH Jillian Scott fci@fluidcontrolsinstitute.org BSR/FCI x, Control Valve Seat Leakage (revision of ANSI/FCI ) Stakeholders: Manufacturers, users, and specifiers of control valves. Project Need: Industry needs a standard to eliminate present misunderstandings and to assist and guide those people involved in the specification, use, or manufacture of control valves. This standard establishes a series of seat leakage classes for control valves and defines production test procedures. BSR/FCI x, Back Pressure Regulator Capacity (revision of ANSI/FCI ) Stakeholders: Manufacturers, users, and specifiers of backpressure regulators. Project Need: Industry needs a standard to provide a test methodology for measuring and reporting the capacity of direct-acting back-pressure regulators. This standard creates a guideline for establishing and reporting backpressure regulator capacities for use by manufacturers, users, specifiers, and approval bodies in order to promote consistent presentation of backpressure regulator capacities. IEEE (Institute of Electrical and Electronics Engineers) Office: 445 Hoes Lane Piscataway, NJ Lisa Weisser l.weisser@ieee.org BSR/IEEE x, Guide for Communications-Based Protection of Industrial and Commercial Power Systems (new standard) Stakeholders: Stakeholders include engineers, consultants, planners, operators, maintenance staff, and operations staff in the electric power industry. Project Need: Engineers and technicians in power systems are reluctant to use emerging technologies such as IEC (Communication Networks and Systems in Substations). This guide, and subsequent paper presentations, will help familiarize our industry with new techniques. This guide provides a primer for engineers and for those who have little familiarity on communications-based protection such as IEC 61850, DNP3, and Modbus TCP. This work is a simple, easy-to-follow guide on the opportunities and limitations of each protocol and on how to use each protocol effectively. BSR/IEEE x, Standard for Jitter and Phase Noise (new standard) Stakeholders: Engineers within telecommunication industry, electronic systems industry, test and measurement instrumentation industry; academic researchers and teachers in the same fields. Project Need: A single, comprehensive source, guiding the technicians in the fields of signal integrity, and the characterization of electronic components and communication systems would greatly benefit the engineers working in such fields. The standard defines specifications, modeling methods and terminology for the dispersion of the significant instants of repetitive signals in electronics, telecommunications, and measurement referred to as jitter and phase noise.

15 Standards Action - March 3, Page 15 of 37 pages BSR/IEEE C x, Guide for Categorizing Security Needs for Protection and Automation Related Data Files (new standard) Stakeholders: Engineers, technologists, and consultants working with electric power utilities, designers of protection relay and automation systems, programmers of analysis software, and manufacturers of intelligent electronic devices. Project Need: A project for identifying the various types of protection and automation related data files categorized based on risk of disclosure and/or compromise is needed to help guide both utilities and standards development bodies enact appropriate security measures based on category of each file type. Such enactment will help ensure the proper balance between security and functionality as related to maintenance and analysis of protection and automation-related data files. This guide identifies and categorizes protection and automation related data files based on content, use, and risk of disclosure or compromise. Protection- and automation-related data files include, but are not limited to, files used for configuration, management, and analysis of protective relaying systems. BSR/IEEE C62.72a-201x, Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits Amendment: SPD Disconnector Application Considerations and Coordination for Use in Low Voltage AC (1000 V or Less, 50 or 60 Hz) Power Circuits (new standard) Stakeholders: SPD designers, users, and specifiers; Fuse, breaker, and disconnect designers; Surge protective device component designers. Project Need: This project will serve to educate designers, users, and specifiers of surge protective devices (SPDs) regarding application and coordination considerations for SPD Disconnectors. An SPD Disconnector is defined as a device intended to automatically stop the flow of current to the surge protective device or surge protective components (SPCs) in response to an overvoltage, overcurrent, or over temperature event. This guide covers the application of surge-protective devices (SPDs) for installation on the load side of the service equipment for 50 or 60 Hz, ac power circuits rated 1000 V rms or less. BSR/IEEE C x, Guide for Surge Protection of Electric Vehicle Infrastructure (new standard) Stakeholders: EVSE manufacturers, end-users, EV manufacturers, electric utilities, and purchasers of such equipment Project Need: Electric Vehicle Supply Equipment (EVSE) and electric vehicles while charging have sensitive electronics that can be damaged by surges. The guide will assist stake holders in methods of protection for such equipment. The guide encompasses the application of surge protective devices for electric vehicle infrastructure with system voltages of 1000 V (ac) or 1500 V (dc) or less. The document provides guidance for North American types of electric vehicle supply equipment (EVSE) and electric vehicles (EVs) that conform to the SAE J1772, Surface Vehicle Recommended Practice. IESNA (Illuminating Engineering Society of North America) Office: 120 Wall St. 17th Floor New York, NY Patricia McGillicuddy pmcgillicuddy@ies.org BSR/IES/ALA RP x, Lighting for Interior and Exterior Environments (new standard) Stakeholders: Lighting practitioners, architects, interior designers, engineers, electrical contractors, developers. Project Need: Provide lighting practitioners, architects, interior designers, developers with standards for lighting residential spaces. This recommended practice is a guide for designing and for teaching lighting. It covers residential living spaces and other areas intended to impart a residential atmosphere. It describes design objectives, criteria for quantity and quality of illuminance, lighting methods, types and uses of equipment, energy use, and electrical code considerations. Various solutions that address residential lighting problems are also presented. BSR/IESNA LM x, Approved Method for Photometric Testing of Entertainment Luminaires Using HID, Indandescent Filament or LED Illumination Sources (revision of ANSI/IESNA LM (R2009)) Stakeholders: Lighting practitioners, entertainment lighting luminaire manufacturers, lighting testing laboratories. Project Need: Addition of LED light sources to existing standard. Entertainment lighting luminaires usually have much narrower beam distribution than other luminaires, such as those covered by IES LM-35, approved method for photometric testing of floodlights using hid or incandescent filament lamps. Therefore, different test methods and forms of presentation may be used. For example, test data is required in the form of illuminance values on a vertical aiming plane. Data reporting is covered by publication ANSI E , reporting photometric performance data for luminaires used in entertainment lighting, developed by the entertainment services and technology association. IES LM-73 is to be used in conjunction with ANSI E ITI (INCITS) (InterNational Committee for Information Technology Standards) Office: 1101 K Street NW Suite 610 Washington, DC Fax: Lynn Barra (202) comments@itic.org BSR INCITS x, Information technology - SCSI Enclosure Services - 4 (SES-4) (new standard) Stakeholders: ICT industry. Project Need: Recent development of new storage protocols has identified new capabilities that are required for management of enclosures containing devices using those protocols. This standard is the next generation of the current SCSI Enclosure Services. It follows SES, SES-2, and SES-3. The following items should be considered for inclusion in SCSI Enclosure Services-4: new capabilities for support of enclosure elements using new storage protocols; corrections and clarifications; and other capabilities that may fit within the scope of this project.

16 Standards Action - March 3, Page 16 of 37 pages American National Standards Maintained Under Continuous Maintenance The ANSI Essential Requirements: Due Process Requirements for American National Standards provides two options for the maintenance of American National Standards (ANS): periodic maintenance (see clause 4.7.1) and continuous maintenance (see clause 4.7.2). Continuous maintenance is defined as follows: The standard shall be maintained by an accredited standards developer. A documented program for periodic publication of revisions shall be established by the standards developer. Processing of these revisions shall be in accordance with these procedures. The published standard shall include a clear statement of the intent to consider requests for change and information on the submittal of such requests. Procedures shall be established for timely, documented consensus action on each request for change and no portion of the standard shall be excluded from the revision process. In the event that no revisions are issued for a period of four years, action to reaffirm or withdraw the standard shall be taken in accordance with the procedures contained in the ANSI Essential Requirements. The Executive Standards Council (ExSC) has determined that for standards maintained under the Continuous Maintenance option, separate PINS announcements are not required. The following ANSI Accredited Standards Developers have formally registered standards under the Continuous Maintenance option. - AAMI (Association for the Advancement of Medical Instrumentation) - AAMVA (American Association of Motor Vehicle Administrators) - AGA (American Gas Association) - AGSC (Auto Glass Safety Council) - ASC X9 (Accredited Standards Committee X9, Incorporated) - ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.) - ASME (American Society of Mechanical Engineers) - ASTM (ASTM International) - GBI (The Green Building Initiative) - GEIA (Greenguard Environmental Institute) - HL7 (Health Level Seven) - IESNA (The Illuminating Engineering Society of North America) - MHI (ASC MH10) (Material Handling Industry) - NAHBRC (NAHB Research Center, Inc.) - NBBPVI (National Board of Boiler and Pressure Vessel Inspectors) - NCPDP (National Council for Prescription Drug Programs) - NISO (National Information Standards Organization) - NSF (NSF International) - PRCA (Professional Ropes Course Association) - RESNET (Residential Energy Services Network) - TIA (Telecommunications Industry Association) - UL (Underwriters Laboratories, Inc.) To obtain additional information with regard to these standards, including contact information at the ANSI Accredited Standards Developer, please visit ANSI Online at select Standards Activities, click on Public Review and Comment and American National Standards Maintained Under Continuous Maintenance. This information is also available directly at Alternatively, you may contact the Procedures & Standards Administration department (PSA) at psa@ansi.org or via fax at If you request that information be provided via , please include your address; if you request that information be provided via fax, please include your fax number. Thank you.

17 Standards Action - March 3, Page 17 of 37 pages ANSI-Accredited Standards Developers Contact Information The addresses listed in this section are to be used in conjunction with standards listed in PINS, Call for Comment and Final Actions. This section is a list of developers who have submitted standards for this issue of Standards Action it is not intended to be a list of all ANSI-Accredited Standards Developers. Please send all address corrections to Standards Action Editor at standact@ansi.org. AAMI Association for the Advancement of Medical Instrumentation 4301 N. Fairfax Dr., Suite 301 Arlington, VA Phone: (703) Fax: (703) Web: ABYC American Boat and Yacht Council 613 Third Street, Suite 10 Annapolis, MD Phone: (410) Web: ASC X9 Accredited Standards Committee X9, Incorporated 275 West Street Suite 107 Annapolis, MD Phone: (410) Web: ASCE American Society of Civil Engineers 1801 Alexander Bell Dr Reston, VA Phone: Web: ASHRAE American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc Tullie Circle NE Atlanta, GA Phone: (678) Fax: (678) Web: ASME American Society of Mechanical Engineers Two Park Avenue New York, NY Phone: (212) Fax: (212) Web: ASPE American Society of Plumbing Engineers 6400 Shafer Court Suite 350 Rosemont, IL Phone: (847) Fax: (847) Web: ASQ (ASC Z1) American Society for Quality 600 N Plankinton Ave Milwaukee, WI Phone: (414) Web: ASSE (ASC Z9) American Society of Safety Engineers 520 N. Northwest Highway Park Ridge, IL Phone: (847) Web: ASSE (Safety) American Society of Safety Engineers 520 N. Northwest Hwy Park Ridge, IL Phone: (847) Web: ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA Phone: (610) Fax: (610) Web: ATIS Alliance for Telecommunications Industry Solutions 1200 G Street NW Suite 500 Washington, DC Phone: (202) Web: AWS American Welding Society 8669 NW 36th Street # 130 Miami, FL Phone: (305) , x 301 Fax: (305) Web: AWWA American Water Works Association 6666 W. Quincy Ave. Denver, CO Phone: (303) Fax: (303) Web: B11 B11 Standards, Inc. PO Box Houston, TX Phone: (571) BOMA Building Owners and Managers Association th Street, NW Washington, DC Phone: (202) Web: CPLSO CPLSO The Marchioness Building, Commercial Road Bristol BS16TG, UK BS1 6TG Phone: (078) CSA CSA Group 8501 East Pleasant Valley Rd. Cleveland, OH Phone: (216) x88321 Fax: (216) Web: EOS/ESD ESD Association 7900 Turin Rd., Bldg. 3 Rome, NY Phone: (315) Fax: (315) Web: FCI Fluid Controls Institute 1300 Sumner Avenue Cleveland, OH Phone: (216) Web: IEEE Institute of Electrical and Electronics Engineers 445 Hoes Lane Piscataway, NJ Phone: (732) Web: IESNA Illuminating Engineering Society of North America 120 Wall St. 17th Floor New York, NY Phone: (212) Web: ISEA International Safety Equipment Association 1901 North Moore Street Suite 808 Arlington, VA Phone: (703) Fax: (703) Web: ITI (INCITS) InterNational Committee for Information Technology Standards 1101 K Street NW Suite 610 Washington, DC Phone: (202) Fax: (202) Web: MHI Material Handling Industry 8720 Red Oak Blvd. - Ste. 201 Suite 201 Charlotte, NC Phone: (704) Fax: (704) Web: NEMA (ASC C78) National Electrical Manufacturers Association 1300 N 17th St Rosslyn, VA Phone: Web: NSF NSF International 789 N. Dixboro Road Ann Arbor, MI Phone: (734) Fax: (734) Web: RESNET Residential Energy Services Network, Inc Patina Court Oceanside, CA Phone: (760) Fax: (760) Web: SCTE Society of Cable Telecommunications Engineers 140 Philips Rd Exton, PA Phone: (800) Fax: (800) Web:

18 Standards Action - March 3, Page 18 of 37 pages TCNA (ASC A108) Tile Council of North America 100 Clemson Research Blvd. Anderson, SC Phone: (864) Fax: (864) Web: TIA Telecommunications Industry Association 1320 North Courthouse Road Suite 200 Arlington, VA Phone: (703) Fax: (703) Web: UAMA (ASC B7) Unified Abrasive Manufacturers' Association Detroit Road Cleveland, OH Phone: (440) Fax: (440) Web: UL Underwriters Laboratories, Inc. 12 Laboratory Drive Research Triangle Park, NC Phone: Web:

19 Standards Action - March 3, Page 19 of 37 pages ISO & IEC Draft International Standards This section lists proposed standards that the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) are considering for approval. The proposals have received substantial support within the technical committees or subcommittees that developed them and are now being circulated to ISO and IEC members for comment and vote. Standards Action readers interested in reviewing and commenting on these documents should order copies from ANSI. Comments Comments regarding ISO documents should be sent to ANSI s ISO Team (isot@ansi.org); those regarding IEC documents should be sent to Tony Zertuche, General Secretary, USNC/IEC, at ANSI's New York offices (tzertuche@ansi.org). The final date for offering comments is listed after each draft. Ordering Instructions ISO and IEC Drafts can be made available by contacting ANSI s Customer Service department. Please your request for an ISO or IEC Draft to Customer Service at sales@ansi.org. When making your request, please provide the date of the Standards Action issue in which the draft document you are requesting appears. ISO Standards AGRICULTURAL FOOD PRODUCTS (TC 34) ISO /DAmd2, Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Technique using Baird-Parker agar medium - Amendment 2: Inclusion of an alternative confirmation procedure - 3/15/2017, $33.00 ISO/DIS , Microbiology of the food chain - Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli - Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-d-glucuronide - 3/15/2017, $46.00 AIRCRAFT AND SPACE VEHICLES (TC 20) ISO/DIS 22431, Aerospace series - Pipe coupling Dynamic beam seal end for ferrule, welded - Geometric configuration - 5/12/2017, $33.00 ISO/DIS 22433, Aerospace series - Pipe coupling Dynamic beam seal end for elbows, tees and crosses - Geometric configuration - 5/12/2017, $33.00 ISO/DIS 22436, Aerospace series - Pipe coupling Thread end - Geometric configuration - 5/12/2017, $46.00 ISO/DIS 22437, Aerospace series - Pipe coupling 8 30 in titanium alloy - Nut for welded ferrule - 5/12/2017, $33.00 ISO/DIS 22438, Aerospace series - Pipe coupling 8 30 in titanium alloy - Thrust wires - 5/12/2017, $33.00 BIOLOGICAL EVALUATION OF MEDICAL AND DENTAL MATERIALS AND DEVICES (TC 194) ISO/DIS , Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process - 3/15/2017, $ CORROSION OF METALS AND ALLOYS (TC 156) ISO/DIS 20728, Corrosion of metal and alloys - Determination of resistance of magnesium alloys to stress corrosion cracking - 5/18/2017, $53.00 CRANES (TC 96) DENTISTRY (TC 106) ISO/DIS 20569, Dentistry - Trephine burs - 5/14/2017, $46.00 ISO/DIS 20570, Dentistry - Oral surgical scalpel handle - 5/18/2017, $40.00 ISO/DIS 20608, Dentistry - Powder jet handpieces and powders - 5/13/2017, $71.00 GAS CYLINDERS (TC 58) ISO 11515/DAmd1, Gas cylinders - Refillable composite reinforced tubes of water capacity between 450 L and 3000 L - Design, construction and testing - Amendment 1-5/13/2017, $33.00 IMPLANTS FOR SURGERY (TC 150) ISO/DIS 19090, Tissue-engineered medical products - Bioactive ceramics - Cell migration ability test for porous body - 3/18/2017, $98.00 ISO/DIS 19227, Implants for surgery - Cleanliness of orthopedic implants - General requirements - 4/20/2017, $67.00 INDUSTRIAL TRUCKS (TC 110) ISO/DIS 6055, Industrial trucks - Overhead guards - Specification and testing - 3/18/2017, $62.00 MATERIALS, EQUIPMENT AND OFFSHORE STRUCTURES FOR PETROLEUM AND NATURAL GAS INDUSTRIES (TC 67) ISO/DIS , Petroleum and natural gas industries - Specific requirements for offshore structures - Part 9: Structural integrity management - 5/19/2017, $ MECHANICAL VIBRATION AND SHOCK (TC 108) ISO/DIS , Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 6: Time-temperature superposition - 5/10/2017, $82.00 NICKEL AND NICKEL ALLOYS (TC 155) ISO/DIS 7529, Nickel alloys - Determination of chromium content - Potentiometric titration method with ammonium iron(ii) sulfate - 3/15/2017, $46.00 ISO/DIS 11437, Nickel alloys - Determination of lead - Electrothermal atomic absorption spectrometric method - 3/16/2017, $67.00 ISO/DIS , Cranes - Design principles for loads and load combinations - Part 2: Mobile cranes - 5/19/2017, $77.00

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 46, #30 July 24, 2015 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 46, #43 October 23, 2015 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards VOL. 48, #36 September 8, 2017 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 23 Final Actions... 26 Project Initiation Notification

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #7 February 12, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards VOL 48, #27 July 7, 2017 Contents American National Standards Call for Comment on Standards Proposals 2 Call for Members (ANS Consensus Bodies) 13 Final Actions 19 Project Initiation Notification System

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #32 August 5, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #30 July 22, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 46, #4 January 23, 2015 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 48, #21 May 26, 2017 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #22 May 27, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #31 July 29, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards VOL. 49, #5 February 2, 2018 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 11 Final Actions... 16 Project Initiation Notification

More information

American National Standards

American National Standards VOL. 49, #31 August 3, 2018 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 12 Final Actions... 15 Project Initiation Notification

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #12 March 18, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards VOL. 50, #5 February 1, 2019 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 13 Final Actions... 16 Project Initiation Notification

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 44, #11 March 15, 2013 Contents American National Standards Call for Comment on Standards Proposals...

More information

Committee Input No NFPA [ Global Input ] Submitter Information Verification. Committee Statement. 1 of /20/ :02 AM

Committee Input No NFPA [ Global Input ] Submitter Information Verification. Committee Statement. 1 of /20/ :02 AM 1 of 213 10/20/2016 11:02 AM Committee Input No. 2505-NFPA 72-2016 [ Global Input ] Change the term visible to visual where appropriate Submitter Information Verification Submitter Full Name: SIG-NAS Organization:

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 48, #3 January 20, 2017 Contents American National Standards Call for Comment on Standards Proposals...

More information

Safety Standard for Refrigeration Systems

Safety Standard for Refrigeration Systems BSR/ASHRAE Addendum a ANSI/ASHRAE Standard 15-2016 First Public Review Draft Safety Standard for Refrigeration Systems First Public Review (April 2017) (Draft shows Proposed Changes to Current Standard)

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 48, #4 January 27, 2017 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards VOL. 48, #29 July 21, 2017 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 7 Final Actions... 10 Project Initiation Notification

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 48, #16 April 21, 2017 Contents American National Standards Call for Comment on Standards Proposals...

More information

Australian Standard. Functional safety Safety instrumented systems for the process industry sector

Australian Standard. Functional safety Safety instrumented systems for the process industry sector AS IEC 61511.2 2004 IEC 61511-2:2003 AS IEC 61511.2 Australian Standard Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of AS IEC 61511.1

More information

American National Standards

American National Standards VOL. 48, #45 November 10, 2017 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 15 Final Actions... 18 Project Initiation Notification

More information

A NATIONAL SET OF HYDROGEN CODES AND STANDARDS FOR THE US

A NATIONAL SET OF HYDROGEN CODES AND STANDARDS FOR THE US A NATIONAL SET OF HYDROGEN CODES AND STANDARDS FOR THE US Rivkin, C. 1, Blake, C. 1, Burgess, R. 1, Buttner, W. 1, and Post, M. 1 1 Hydrogen Technologies and Systems Center, National Renewable Energy Laboratory,

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #26 June 24, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL 45, #9 February 28, 2014 Contents American National Standards Call for Comment on Standards Proposals

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 46, #6 February 6, 2015 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standard

American National Standard American National Standard Approved : 06/19/2014 Secretariat: National Electrical Manufacturers Association for Electric Lamps Assigned LED Lamp Codes ANSI C78.50-2014 An American National Standard implies

More information

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT COMMITTEE: EL-002 Safety of Household and Similar Electrical Appliances and Small Power Transformers ATTENTION: Bev Harniss DR 18925 CP DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #38 September 16, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

Second Revision No. 5-NFPA [ Section No ] Supplemental Information. Submitter Information Verification. Committee Statement

Second Revision No. 5-NFPA [ Section No ] Supplemental Information. Submitter Information Verification. Committee Statement 1 of 7 3/4/2016 12:02 PM Second Revision No. 5-NFPA 56-2016 [ Section No. 1.1.2 ] 1.1.2 Nonapplication of Standard. This standard shall not apply to the following items: (1)* Piping systems covered by

More information

American National Standards

American National Standards VOL. 49, #49 December 7, 2018 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 13 Final Actions... 18 Project Initiation Notification

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #29 July 15, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #14 April 1, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3.

7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3. Rev. 1 03/05/2015 ANNEX A to the Yokogawa Corporation of America Quality Assurance Manual For Additional Requirements selectively applied to ATEX and IECEx certified products CONTENTS 1. Scope 2. Purpose

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 40, #35 August 28, 2009 Contents American National Standards Call for Comment on Standards Proposals...

More information

Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ]

Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ] Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ] Chapter 2 Referenced Publications 2.1 General. The documents or portions thereof listed in this chapter are referenced within this standard and shall be considered

More information

American National Standards

American National Standards VOL 48, #47 November 24, 2017 Contents American National Standards Call for Comment on Standards Proposals 2 Call for Members (ANS Consensus Bodies) 16 Final Actions 18 Project Initiation Notification

More information

American National Standards

American National Standards VOL 48, #51 December 22, 2017 Contents American National Standards Call for Comment on Standards Proposals 2 Call for Members (ANS Consensus Bodies) 9 Final Actions 12 Project Initiation Notification System

More information

American National Standards

American National Standards VOL. 48, #52 December 29, 2017 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 7 Final Actions... 10 Project Initiation Notification

More information

Performance Rating of Refrigerant Pressure Regulating Valves

Performance Rating of Refrigerant Pressure Regulating Valves ANSI/AHRI Standard 771 (SI) 2014 Standard for Performance Rating of Refrigerant Pressure Regulating Valves Approved by ANSI on May 19, 2015 IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #18 April 29, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 43, #32 August 10, 2012 Contents American National Standards Call for Comment on Standards Proposals...

More information

Public Comment No. 23-NFPA [ Section No ] Statement of Problem and Substantiation for Public Comment Related Item

Public Comment No. 23-NFPA [ Section No ] Statement of Problem and Substantiation for Public Comment Related Item Public Comment No. 23-NFPA 96-2015 [ Section No. 2.3.1 ] 2.3.1 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM E84, Standard Test Method

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #8 February 19, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 46, #26 June 26, 2015 Contents American National Standards Call for Comment on Standards Proposals...

More information

FACT SHEET 2018 National Fuel Gas Code Summary List of Revisions rev

FACT SHEET 2018 National Fuel Gas Code Summary List of Revisions rev This fact sheet provides an overview of the significant revisions in the 2015 National Fuel Gas Code approved by the National Fuel Gas Code Committee, ANSI ASC Z223 and NFPA 54. These revisions are published

More information

Type 5 Certifications:

Type 5 Certifications: : What are they and how do you use them for compliance? Intertek Cleeve Road, Leatherhead, Surrey KT22 7SB UK info.uk@intertek.com 01372 370900 www.intertek.com Contents Contents... 1 Introduction... 1

More information

Performance Rating of Heat Pump Pool Heaters

Performance Rating of Heat Pump Pool Heaters ANSI/AHRI Standard 1161 (SI) 2014 Standard for Performance Rating of Heat Pump Pool Heaters Approved by ANSI on 20 November 2014 IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does

More information

2018 National Fuel Gas Code Summary List of Revisions Updated: 7/27/17

2018 National Fuel Gas Code Summary List of Revisions Updated: 7/27/17 The following list contains a summary of the significant revisions in the 2015 National Fuel Gas Code approved by the National Fuel Gas Code Committee, ANSI ASC Z223 and NFPA 54. 1.1.1.1 (B), (C), & (D)

More information

4/18/2017. *2012 edition of NFPA 99 has gone through a major overhaul. *This document is now a Code.

4/18/2017. *2012 edition of NFPA 99 has gone through a major overhaul. *This document is now a Code. Carsten Lunde, ASSE 6050 Instructor April 20, 2017 Carsten s Yearly Analysis, Inc. Any opinions expressed verbally by the speaker before you and all text in this presentation should be considered the speakers

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL 46, #45 November 6, 2015 Contents American National Standards Call for Comment on Standards Proposals

More information

American National Standard for Electrical Lamp Bases Specifications for Bases (Caps) for Electric Lamps

American National Standard for Electrical Lamp Bases Specifications for Bases (Caps) for Electric Lamps American National Standard for Electrical Lamp Bases Specifications for Bases (Caps) for Electric Lamps Secretariat: National Electrical Manufacturers Association Approved December 12, 2014 American National

More information

Fire Pump Specification

Fire Pump Specification GPS Amsterdam Phase 2 Expansion Project No: 1703 Fire Pump Specification Rev. Description Date Issued by 00 First Issue 10-09-2017 1703-F02-403-001 GPS Amsterdam Phase 2 Expansion Table of Contents 1 F02-403-001

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 46, #52 December 25, 2015 Contents American National Standards Call for Comment on Standards Proposals...

More information

American National Standards

American National Standards VOL 48, #48 December 1, 2017 Contents American National Standards Call for Comment on Standards Proposals 2 Call for Members (ANS Consensus Bodies) 9 Final Actions 12 Project Initiation Notification System

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL 46, #17 April 24, 2015 Contents American National Standards Call for Comment on Standards Proposals 2

More information

2013 ASHRAE. Standards & Guidelines CD. Contents

2013 ASHRAE. Standards & Guidelines CD. Contents 2013 ASHRAE Standards & Guidelines CD Contents ANSI/ARI/ASHRAE ISO Standard 13256-1:1998 (RA 2012) Water-source heat pumps testing and rating for performance Part 1: Water-to-air and brine-to-air heat

More information

Second Revision No. 1-NFPA 90A-2016 [ Section No ] Submitter Information Verification. Committee Statement

Second Revision No. 1-NFPA 90A-2016 [ Section No ] Submitter Information Verification. Committee Statement Second Revision No. 1-NFPA 90A-2016 [ Section No. 2.3.2 ] 2.3.2 ASTM International Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM C411, Standard

More information

ANSI/AHRI Standard 620 (I-P) 2014 Standard for Performance Rating of Self-contained Humidifiers for Residential Applications

ANSI/AHRI Standard 620 (I-P) 2014 Standard for Performance Rating of Self-contained Humidifiers for Residential Applications ANSI/AHRI Standard 620 (I-P) 2014 Standard for Performance Rating of Self-contained Humidifiers for Residential Applications Approved by ANSI on 19 November 2014 IMPORTANT SAFETY DISCLAIMER AHRI does not

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #27 July 1, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

Standard for tests for flammability of plastic materials for parts in devices and appliances

Standard for tests for flammability of plastic materials for parts in devices and appliances IAS Accreditation Number TL-212 Company Name Address 3933 U.S. Route 11 Cortland, NY 13045 Contact Name Terence J. O'Beirne, Quality Manager Telephone (607)758-6316 Effective Date of Scope September 25,

More information

IAS Accreditation Number Applied Research Laboratories of South Florida, LLC 5371 Northwest 161st Street Miami, Florida 33014

IAS Accreditation Number Applied Research Laboratories of South Florida, LLC 5371 Northwest 161st Street Miami, Florida 33014 IAS Accreditation Number Company Name Address Contact Name TL-222 of South Florida, LLC 5371 Northwest 161st Street Miami, Florida 33014 John Lewczak Director of Quality Assurance Telephone (305) 624-4800

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #21 May 20, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

NOTICE. (Formulated under the cognizance of the CTA R3 Audio Systems Committee.)

NOTICE. (Formulated under the cognizance of the CTA R3 Audio Systems Committee.) CTA Bulletin Recommended Loudspeaker Safety Practices An Industry Guideline CTA-CEB19 W-2014 (Formerly CEA-CEB19 W-2014) September 2014 NOTICE Consumer Technology Association (CTA) Standards, Bulletins

More information

BSR/ASHRAE Addendum b to ANSI/ASHRAE Standard FORWORD

BSR/ASHRAE Addendum b to ANSI/ASHRAE Standard FORWORD (This foreword is for information only and is not part of this addendum) FORWORD Changes in this addendum to ANSI/ASHRAE 15-1994 are made to add water as a refrigerant, include absorption refrigeration

More information

NEW YORK CITY FIRE DEPARTMENT. Notice of Public Hearing and Opportunity to Comment on Proposed Rule

NEW YORK CITY FIRE DEPARTMENT. Notice of Public Hearing and Opportunity to Comment on Proposed Rule NEW YORK CITY FIRE DEPARTMENT Notice of Public Hearing and Opportunity to Comment on Proposed Rule What are we proposing? The Fire Department is proposing to comprehensively update Section 3004-01 of Title

More information

Performance Rating of Unit Ventilators

Performance Rating of Unit Ventilators AHRI Standard 840 (I-P) 1 2015 Standard for Performance Rating of Unit Ventilators Price $10.00 (M) $20.00 (NM) Printed in U.S.A. Office Copyright 2009, by Air-Conditioning and Refrigeration Institute

More information

Australian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529

Australian Standard. Degrees of protection provided by enclosures (IP Code) AS IEC Ed 2.1:2001 AS 60529 AS 60529 2004 IEC 60529 Ed 2.1:2001 AS 60529 Australian Standard Degrees of protection provided by enclosures (IP Code) This Australian Standard was prepared by Committee EL-026, Protective Enclosures

More information

American National Standards

American National Standards VOL. 49, #43 October 26, 2018 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 12 Final Actions... 15 Project Initiation Notification

More information

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site Australian/New Zealand Standard (ISO 5149-3:2014, MOD) Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site Superseding in part AS/NZS 1677.2:1998 This joint

More information

American National Standards

American National Standards VOL. 49, #51 December 21, 2018 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 15 Final Actions... 18 Project Initiation Notification

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 46, #22 May 29, 2015 Contents American National Standards Call for Comment on Standards Proposals...

More information

Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.

Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No. AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,

More information

CHAPTER 5 REFERENCED STANDARDS. American Architectural Manufacturers Association 1827 Walden Office Square Suite 550 Schaumburg, IL

CHAPTER 5 REFERENCED STANDARDS. American Architectural Manufacturers Association 1827 Walden Office Square Suite 550 Schaumburg, IL CHAPTER 5 REFERENCED STANDARDS This chapter lists the standards that are d in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 47, #41 October 7, 2016 Contents American National Standards Call for Comment on Standards Proposals...

More information

Specifications for Fluorocarbon Refrigerants

Specifications for Fluorocarbon Refrigerants ANSI/AHRI Standard 700 with Addenda 1 and 2 2006 Standard for Specifications for Fluorocarbon Refrigerants Approved by ANSI on 8 August 2011 WITH ADDENDUM 1, Specifications for Fluorocarbon Refrigerants

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 48, #6 February 10, 2017 Contents American National Standards Call for Comment on Standards Proposals...

More information

CHAPTER 17 STANDARDS STANDARDS Broadway, New York, NY 10018,

CHAPTER 17 STANDARDS STANDARDS Broadway, New York, NY 10018, STANDARDS Chapter 17, Part II CHAPTER 17 STANDARDS 1701.0 Scope Part I of this chapter covers standards that are hereby declared to be part of this code. Part II of this chapter lists standards which relate

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 35, #31 July 30, 2004 Contents American National Standards Call for Comment on Standards Proposals...

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61511-2 First edition 2003-07 Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1 Reference number

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10438-1 Second edition 2007-12-15 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 1: General requirements

More information

Design and Construction Standards SECTION PLUMBING EQUIPMENT

Design and Construction Standards SECTION PLUMBING EQUIPMENT SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES: A. Water heaters. B. Packaged water heating systems. C. Water storage tanks. D. Water softeners. E. Pumps. F. Circulators. 1.2 REFERENCES

More information

American National Standard. for Roadway and Area Lighting Equipment Solid State Light Sources Used in Roadway and Area Lighting ANSI C136.

American National Standard. for Roadway and Area Lighting Equipment Solid State Light Sources Used in Roadway and Area Lighting ANSI C136. This is a preview of "". Click here to purchase the full version from the ANSI store. American National Standard for Roadway and Area Lighting Equipment Solid State Light Sources Used in Roadway and Area

More information

American National Standards

American National Standards VOL. 49, #41 October 12, 2018 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Members (ANS Consensus Bodies)... 11 Final Actions... 14 Project Initiation Notification

More information

Throughout standard remove references to the following and replace with the following:

Throughout standard remove references to the following and replace with the following: of 35 12/3/2015 7:13 AM Public Input No. 1-NFPA 90A-2015 [ Global Input ] Throughout standard remove references to the following and replace with the following: (1) ANSI/UL and replace with UL. (2) ANSI/ASHRAE

More information

Australian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508

Australian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508 AS 61508.0 2006 IEC/TR 61508-0:2005 AS 61508.0 2006 Australian Standard Functional safety of Part 0: Functional safety and AS 61508 This Australian Standard was prepared by Committee IT-006, Industrial

More information

Specifications for Fluorocarbon Refrigerants

Specifications for Fluorocarbon Refrigerants AHRI Standard 700 with Addendum 0 Standard for Specifications for Fluorocarbon Refrigerants WITH ADDENDUM, Specifications for Fluorocarbon Refrigerants June 0 AHRI Standard 700-0 with Addendum, Specifications

More information

SECTION PLUMBING EQUIPMENT

SECTION PLUMBING EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Water heaters B. Packaged water heating systems C. Water storage tanks D. Water softeners E. Pumps F. Circulators 1.2 REFERENCES SECTION 22 30 00 PLUMBING EQUIPMENT

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 35, #34 August 20, 2004 Contents American National Standards Call for Comment on Standards Proposals...

More information

FIRE & LIFE SAFTEY STANDARD

FIRE & LIFE SAFTEY STANDARD Title: Effective Date: 01/01/14 Revised Date: 1/1/14 Code References: Title 16, Chapter 16.16 of the Roseville Municipal Code, NFPA 72 Note: This standard is a summary of Fire Department clarifications

More information

Sound Performance Rating of Non-ducted Indoor Airconditioning

Sound Performance Rating of Non-ducted Indoor Airconditioning AHRI Standard 350 2015 Standard for Sound Performance Rating of Non-ducted Indoor Airconditioning and Heat Pump Equipment IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does not certify

More information

EU RO Mutual Recognition Technical Requirements

EU RO Mutual Recognition Technical Requirements Adoption 1 April 2016 1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 6. APPROVAL DATE AND REVISION NUMBER... 7 7. BACKGROUND INFORMATION

More information

To: All SAAS Accredited Certification Bodies Subject: Clarification to Emergency and Health & Safety Requirements in the SA8000 Standard

To: All SAAS Accredited Certification Bodies Subject: Clarification to Emergency and Health & Safety Requirements in the SA8000 Standard SOCIAL ACCOUNTABILITY ACCREDITATION SERVICES To: All SAAS Accredited Certification Bodies Subject: Clarification to Emergency and Health & Safety Requirements in the SA8000 Standard Background: After an

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL 45, #43 October 24, 2014 Contents American National Standards Call for Comment on Standards Proposals

More information

ELECTRIC and NEON SIGN STANDARDS. By Randy Wright RKW CONSULTING

ELECTRIC and NEON SIGN STANDARDS. By Randy Wright RKW CONSULTING SEMINAR 301 Part 1: Changes in the 2005 NEC SEMINAR RULES: There are no Rules All Questions need to be asked Stop at any time for an explanation SEMINAR PARTS: ELECTRIC and NEON SIGN STANDARDS By Randy

More information

American National Standards

American National Standards PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 48, #5 February 3, 2017 Contents American National Standards Call for Comment on Standards Proposals...

More information

Sound Performance Rating of Outdoor Unitary Equipment

Sound Performance Rating of Outdoor Unitary Equipment 2015 Standard for Sound Performance Rating of Outdoor Unitary Equipment AHRI Standard 270 WITH ADDENDUM 1, Sound Performance Rating of Outdoor Unitary Equipment March 2016 Note: This addendum is not ANSI

More information

Update all extract references to NFPA documents (including NFPA 72) in Chapter 3 and related annex material to the latest editions.

Update all extract references to NFPA documents (including NFPA 72) in Chapter 3 and related annex material to the latest editions. 11/16/12 TerraView First Revision No. 15-NFPA 720-2012 [ Global Input ] Update all extract references to NFPA documents (including NFPA 72) in Chapter 3 and related annex material to the latest editions.

More information