2017 Review. Michael Greer Principal Airworthiness Surveyor 28 March 2018

Size: px
Start display at page:

Download "2017 Review. Michael Greer Principal Airworthiness Surveyor 28 March 2018"

Transcription

1 2017 Review Michael Greer Principal Airworthiness Surveyor 28 March 2018

2 Workload Currently 158 EASA Part 21 Production Organisations 6 Pending / under initial investigation

3 Findings Analysis Total Level 1

4 Findings Analysis 2017 / 2016 Comparison Total Level Total Level

5 What have we been doing? New EASA Form 4 Focus on Root Cause Analysis More risk based conversations with Accountable Managers Global Manufacturing Conference; EASA Regulatory Capture PAMG / SME working groups

6 New EASA Form 4 We recently updated the Form 4 as part of the postholder performance project. The changes to the form will allow the following to be captured: New Postholder positions within other regulation types Declaration from the applicant that they have the knowledge and experience as required in the regulation. Requirement to provide a man-hour/resource plan from the applicant to support he has enough capacity to perform the role. Declaration from the Accountable Manager that the applicant is competent to perform the role and he has capacity. Other minor amendments around giving examples for each of the sections for completion.

7 Root Cause Analysis We are producing a guidance document for organisations Initially all CAA Surveyors will be trained on RCA

8 Root Cause Analysis Many aviation organisations operate under Quality systems certified to standards such as ISO 9001, AS9100, AS13000 or participate in accreditation programmes such as PRI Nadcap or UKAS. These standards offer additional guidance on root cause and corrective action methodology to ensure compliance with their requirements. This document is intended to build on their documentation and offer some additional airworthiness guidance, as such there should be little or no additional burden to organisations as they should seek to follow one consistent internal approach to root cause.

9 The Performance Conversation Specific meetings with Accountable Manager established with Entities as part of the CAA Performance Based Regulation (PBR) process. As the prime purpose of the POA is to manufacture to the approved Design Data, a Quality Escape or Concession is an important indicator of performance. Includes specifics of company performance in complying to POA requirements, trends in Occurrence Reporting, Concessions, First Time Pass Rates, Scrap Costs etc. Entities concept currently restricted to larger organisations approvals with multiple approvals, but we need an understanding of overall POA performance in this area to support surveillance planning. 9

10 2017 Global Manufacturer s Conference Global production oversight Methods for reducing duplication in oversight of organisations approved by multiple Authorities; Introducing a single Database for reporting the relevant Suppliers information. Innovative Production Methods - Challenges and Opportunities for Industry and Regulators (e.g. ALM). 10

11 New Developments Changes to Basic Regulation Embodiment of risk-based compliance verification into Part-21 Opinion 08/2016 Halon - Update of Part-26 to comply with ICAO Standards (RMT.0560) Parts without a Form 1 (RMT.0018) Regular update of AMC/GM to Part-21 Update of AMC-20 - In flight entertainment (IFE), lead-free soldering, harmonisation of safety and software criteria (RMT.0561)

12 Changes to Basic Regulation Text agreed Currently being translated into EU languages Likely date for implementation August 2018 This initiative is part of the 2015 European Commission s 'Aviation Strategy to Enhance the Competitiveness of the EU Aviation Sector. For this purpose the present initiative proposes to introduce a risk and performance based approach to safety regulation. Safe integration of unmanned aircraft into the European airspace. The possibility to transfer responsibilities from Member States to the Agency (which today exists for production facilities and flight simulation training devices) is extended to all types of activities. Cyber security.

13 NPA Installation of parts and appliances that are released without an EASA Form 1 or equivalent. Extension for comments to 30/03/2018 Aim: More proportionate and efficient requirements Current requirements all new spare parts except standard parts accompanied by an Easa Form 1 in the airworthiness field, in particular to introduce commensurate manufacturing requirements for new spare parts and appliances. The requirement mandates that parts and appliances to be installed during maintenance need to be accompanied by a European Aviation Safety Agency (EASA) Form 1 to attest manufacturing in accordance with Annex I (Part 21) to Regulation (EU) No 748/2012, which is considered, in certain cases, disproportionate. The so-called commercial parts are an example of that. Since these parts are often not designed exclusively for aviation use, parts manufacturers are not necessarily interested in achieving manufacturing recognition in accordance with Part 21 manufacturing standards (e.g. production organisation approval (POA)). Not only for commercial parts, but also for other parts and appliances a release certificate other than an EASA Form 1 may also be sufficient to guarantee adequate manufacturing quality. In order to ease the manufacturing requirements for some of the parts, this NPA proposes to assign a criticality level (CL) for each part based on the safety consequences should the part fail to meet its design standards. This NPA proposes that only the design holder (for instance, the type certificate holder) can establish the CL for each part, with the default option of assigning the most stringent CL to all parts. In certain cases, the possibility to assign CLs is also given to EASA. This NPA also establishes minimum manufacturing and release certificate requirements based on industry standards depending on the CL assigned to each part. Different marking requirements also apply for each part depending on its assigned CL. Once the implementing rule and related AMC/GM are in place, by alleviating the effective requirements for the manufacture of parts not being critical, the manufacturing costs would decrease without affecting the safety of the air operations. The requirements proposed by this NPA may very positively impact on general aviation (GA), since often certain parts of the aircraft have not been designed with an aviation intent and not manufactured by a POA.

14 MORs CAP ype=65&appid=11&mode=list&type=search&search=cap%20382 AVIATION REPORTING PORTAL CURRENT BLOG

15 Thank you

16 Supplementary Slides

17 SMS Task RMT.0251 (ex MDM.055) will introduce SMS in the airworthiness domain. Phase I CAMO Phase II Part 21 & Part 145 Minimum changes to Part-21. Human Factors requirements to be added.

18 SMS Terms of Reference for rulemaking task RMT.0251(b) (MDM.055-MDM.060) Phase II - SMS for EASA Part-21 design organisations, EASA Part-21 production organisations and EASA Part-145 maintenance organisations DD /Q1 2019/Q2 2020/Q4 2020/Q4

19 SMS Nomination of a person or group of persons fulfilling the role of safety manager Documented processes for hazard identification Processes for safety risk assessment, analysis, including incident investigation, risk mitigation and follow-up of actions Implementation of an internal safety reporting scheme Safety action planning, including the establishment of a safety review board (SRB), composed of line managers, the accountable manager and the safety manager

20 ALM Additive Layer Manufacturing (ALM), also known as 3-D printing, refers to a range of manufacturing methods where the as-purchased material (i.e. metallic powder, wire, etc.) is consolidated by a machine into a nearfinished part by deposition in layers then fused. I.e. the material is created at the same time as the part. There are 7 categories Current CAA position is to adopt the EASA certification memo EASA CM No.: CM-S-008 Issue 01 Process variability is currently an issue so each part is at present subject to individual qualification. Implementation of an AM process by a POA holder is controlled through the applicable design data. Implementation of ALM is considered a change and should be reviewed by the CAA. Depending on part criticality such a change may not necessarily be a significant change. DO / PO Arrangement is key. PO should submit Quality Plan / Project Plan for review and acceptance prior to implementation of change.

21 Opinion 08/2016 Halon - Update of Part-26 to comply with ICAO Standards (RMT.0560) Halon cut-off dates Commission Regulation (EU) No 744/20108 ICAO standards9 Purpose Type of extinguisher Type of halon Dates Cut-off10 End New Dates Cut-off12 products11 Normally unoccupied cargo compartments Cabins and crew compartments Fixed Portable (Handheld) N.A. N.A. Thank you N.A. Engine nacelles and APU Fixed N.A Lavatory waste receptacles Fixed

22 b) AMC on lead-free soldering In 2003, the European Parliament and the Council issued Directive 2002/95/EC (later replaced by Directive 2011/65/EU6), which required that all new electrical and electronic equipment and systems put on the market after 1 July 2006 do not contain lead (Pb) or other environmentally hazardous materials. Lead was used as surface plating for soldering purposes (e.g. tin/lead solder alloys) on discrete electrical and electronic components, including integrated circuits, semiconductors, capacitors, resistors, and other electronic circuitry, widely used on aircraft. 6 Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (OJ L 174, , p. 88) ( Pb-free solders and finishes inappropriate to withstand the extreme aviation operating environment may decrease the reliability of systems or subsystems, and ultimately have a negative impact on safety and system performance. The objective of this NPA is hence to provide guidance for the transition to lead-free soldering, considering applications for new type certificates as well as changes to existing type certificates.

23 (c) AMC on IFE systems Aircraft IFE systems pose, due to their nature and the technologies used, several challenges which should be addressed in order to minimise safety issues during certification as well as operation of these systems. If these systems suffer a malfunction, this could lead to electrical arcing posing a fire hazard. The development of IFE systems towards open platforms interacting with portable electronic devices (PEDs), either deployed by the aircraft operator or carried on board by the passengers, also leads to more electromagnetic emissions than before. Since the first inception of IFE systems, technology has shifted away from simple systems towards more complex ones, which are now becoming increasingly mobile and interactive. As the IFE technology is constantly evolving, the regulatory framework should keep the pace and be updated accordingly. Therefore, the objective of this NPA is to provide guidance for the approval of installation of IFE systems.

Halon: Update of Part-26 to comply with ICAO Standards

Halon: Update of Part-26 to comply with ICAO Standards Rulemaking Directorate Terms of Reference for a rulemaking task Halon: Update of Part-26 to comply with ICAO Standards ISSUE 1 15/05/2013 Applicability Process map Affected regulations and decisions: Part-26

More information

EASA Halon Replacement Status. presented by Enzo Canari Cabin Safety Expert IASFPWG Meeting Atlantic City,1-2 November 2017

EASA Halon Replacement Status. presented by Enzo Canari Cabin Safety Expert IASFPWG Meeting Atlantic City,1-2 November 2017 EASA Halon Replacement Status presented by Enzo Canari Cabin Safety Expert IASFPWG Meeting Atlantic City,1-2 November 2017 Halon Replacement Dates Purpose End date Mandatory Retrofit Forward fit New applications

More information

DOA Workshop - Jakarta. Sharing experiences in the field of DOA. Wendell Lynch EASA International Cooperation Officer (DOATL)

DOA Workshop - Jakarta. Sharing experiences in the field of DOA. Wendell Lynch EASA International Cooperation Officer (DOATL) DOA Workshop - Jakarta Sharing experiences in the field of DOA Wendell Lynch EASA International Cooperation Officer (DOATL) Contents! Why DOA?! DOA Rulemaking development General Why DOA? Rela-onship with

More information

COMMISSION REGULATION (EU)

COMMISSION REGULATION (EU) L 218/2 Official Journal of the European Union 19.8.2010 REGULATIONS COMMISSION REGULATION (EU) No 744/2010 of 18 August 2010 amending Regulation (EC) No 1005/2009 of the European Parliament and of the

More information

DRAFT COMMISSION DELEGATED REGULATION (EU) / of XXX

DRAFT COMMISSION DELEGATED REGULATION (EU) / of XXX DRAFT COMMISSION DELEGATED REGULATION (EU) / of XXX on making available on the market of unmanned aircraft intended for use in the open category and on third-country UAS operators THE EUROPEAN COMMISSION,

More information

ASSEMBLY 37TH SESSION

ASSEMBLY 37TH SESSION International Civil Aviation Organization WORKING PAPER 20/9/10 (Information paper) English only ASSEMBLY 37TH SESSION TECHNICAL COMMISSION Agenda Item 33: Halon replacement HALON REPLACEMENT CHALLENGES

More information

COMMISSION DELEGATED REGULATION (EU) /... of

COMMISSION DELEGATED REGULATION (EU) /... of EUROPEAN COMMISSION Brussels, 8.3.2018 C(2018) 1392 final COMMISSION DELEGATED REGULATION (EU) /... of 8.3.2018 establishing common safety methods on safety management system requirements pursuant to Directive

More information

EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY

EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY Brussels, 23 October 2018 REV1 Replaces the Q&A document published on 13 September 2017 QUESTIONS AND ANSWERS RELATED TO THE UNITED KINGDOM'S

More information

A Notification under Article 12 of Regulation (EU) No 1025/2012 1

A Notification under Article 12 of Regulation (EU) No 1025/2012 1 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation

More information

DGE 2 EUROPEAN UNION. Brussels, 20 September 2017 (OR. en) 2016/0287 (COD) PE-CONS 28/17 TELECOM 158 FC 54 CODEC 1008

DGE 2 EUROPEAN UNION. Brussels, 20 September 2017 (OR. en) 2016/0287 (COD) PE-CONS 28/17 TELECOM 158 FC 54 CODEC 1008 EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 20 September 2017 (OR. en) 2016/0287 (COD) PE-CONS 28/17 TELECOM 158 FC 54 CODEC 1008 LEGISLATIVE ACTS AND OTHER INSTRUMTS Subject: REGULATION

More information

CE Marking and Technical Standardisation

CE Marking and Technical Standardisation EDITION 3.0 CE Marking and A G A M B I C A T E C H N I C A L G U I D E Technical Standardisation Guidelines for application to Electrical Power Drive Systems CE Marking and Technical Standardisation Guidelines

More information

(recast) (Text with EEA relevance) out the conformity assessment procedure. Conformity 20 February 2014.

(recast) (Text with EEA relevance) out the conformity assessment procedure. Conformity 20 February 2014. 29.3.2014 Official Journal of the European Union L 96/357 DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating

More information

EUROPEAN UNION. Brussels, 13 February 2014 (OR. en) 2011/0357 (COD) PE-CONS 54/13 ENT 190 MI 550 CONSOM 128 COMPET 470 CODEC 1481

EUROPEAN UNION. Brussels, 13 February 2014 (OR. en) 2011/0357 (COD) PE-CONS 54/13 ENT 190 MI 550 CONSOM 128 COMPET 470 CODEC 1481 EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 13 February 2014 (OR. en) 2011/0357 (COD) PE-CONS 54/13 T 190 MI 550 CONSOM 128 COMPET 470 CODEC 1481 LEGISLATIVE ACTS AND OTHER INSTRUMTS Subject:

More information

ODS Licensing System. Information Document

ODS Licensing System. Information Document EUROPEAN COMMISSION DIRECTORATE-GENERAL CLIMATE ACTION Directorate C - Mainstreaming Adaptation and Low Carbon Technology CLIMA.C.2 - Transport and Ozone ODS Licensing System Information Document MEANS

More information

Guidance Note EC Regulation No 842/2006 on Certain Fluorinated Greenhouse Gases. BFPSA Guidance for the Fire Protection Industry

Guidance Note EC Regulation No 842/2006 on Certain Fluorinated Greenhouse Gases. BFPSA Guidance for the Fire Protection Industry Guidance Note EC Regulation No 842/2006 on Certain Fluorinated Greenhouse Gases BFPSA Guidance for the Fire Protection Industry 1 of 9 Contents 1. Introduction...3 2. Background...3 3. Definitions (Article

More information

1. Terms defined in the Construction Products Regulation (CPR)

1. Terms defined in the Construction Products Regulation (CPR) CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction

More information

FAQs Radio Equipment Directive (RE-D)

FAQs Radio Equipment Directive (RE-D) FAQs Radio Equipment Directive (RE-D) What is the objective of the RE-D? The Radio Equipment Directive (2014/53/EU) was adopted in 2014 and Member States had to transpose it into their national law before

More information

Implementing the Construction Products Regulation (EU) 305/2011

Implementing the Construction Products Regulation (EU) 305/2011 Implementing the Construction Products Regulation (EU) 305/2011 G. Katsarakis European Commission, DG Enterprise and Industry Unit B-1: Sustainable Industrial Policy and Construction THE EU CONSTRUCTION

More information

Role of CE Marking in the Placing on the Market of Electronic Components

Role of CE Marking in the Placing on the Market of Electronic Components Explanatory Leaflet Role of CE Marking in the Placing on the Market of Electronic Components New Legislative Framework Component Industries RoHs Directive CE Marking Low Voltage Directive Electronic Components

More information

BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY

BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management

More information

(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland

(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland Electrical Safety Act (1135/2016) By decision of Parliament, the following is enacted:

More information

DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL 29.3.2014 Official Journal of the European Union L 96/309 DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating

More information

COMMISSION DELEGATED REGULATION (EU) /... of

COMMISSION DELEGATED REGULATION (EU) /... of EUROPEAN COMMISSION Brussels, 1.7.2015 C(2015) 4394 final COMMISSION DELEGATED REGULATION (EU) /... of 1.7.2015 on the classification of the reaction to fire performance of construction products pursuant

More information

EN transition from BS 1387 Structural & Conveyance Business

EN transition from BS 1387 Structural & Conveyance Business Corus Tubes EN 10255 transition from BS 1387 Structural & Conveyance Business EN 10255 A smooth transition with Corus Install Contents 1 Introduction 2 The new standard 4 Detailed comparison 7 Comparison

More information

[Docket No. FAA ; Product Identifier 2017-NE-02-AD; Amendment ; AD ]

[Docket No. FAA ; Product Identifier 2017-NE-02-AD; Amendment ; AD ] [Federal Register Volume 82, Number 189 (Monday, October 2, 2017)] [Rules and Regulations] [Pages 45710-45712] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc

More information

COMMISSION IMPLEMENTING DECISION

COMMISSION IMPLEMENTING DECISION 25.3.2014 Official Journal of the European Union L 89/45 COMMISSION IMPLEMENTING DECISION of 21 March 2014 amending Decision 2005/381/EC as regards the questionnaire for reporting on the application of

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02) 12.2.2016 EN Official Journal of the European Union C 54/9 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council

More information

BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02) C 209/12 EN Official Journal of the European Union 15.6.2018 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council,

More information

Official Journal of the European Union. (Non-legislative acts) REGULATIONS

Official Journal of the European Union. (Non-legislative acts) REGULATIONS 19.6.2015 L 154/1 II (Non-legislative acts) REGULATIONS COMMISSION DELEGATED REGULATION (EU) 2015/942 of 4 March 2015 amending Delegated Regulation (EU) No 529/2014 supplementing Regulation (EU) No 575/2013

More information

Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU

Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU GNB-CPR AG Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU NB-CPR/AG/03/002r3 Issued: 24 May 2013 APPROVED GUIDANCE GNB-CPR AG position paper Guidance to

More information

REDCA update on the RED. Days to go. 17 May 2017

REDCA update on the RED. Days to go. 17 May 2017 REDCA update on the RED Days to go 17 May 2017 Replaces Radio & Telecommunication Terminal Equipment Directive (RTTED) 1999/5/EC, repealed with effect from 13 June 2016 RED applied from 13 June 2016 (+

More information

COMMISSION DELEGATED REGULATION (EU) /... of XXX

COMMISSION DELEGATED REGULATION (EU) /... of XXX Ref. Ares(2017)4156968-24/08/2017 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX establishing common safety methods on safety management system requirements

More information

Controlled Door Closing Devices

Controlled Door Closing Devices Controlled Door Closing Devices to BS EN 1154: 1997 + A1:2003 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Controlled Door Closing Devices to BS EN 1154: 1997 + A1:2003 dhf Best Practice

More information

The ATEX Directive 94/9/EC

The ATEX Directive 94/9/EC The ATEX Directive 94/9/EC operation and perspectives in Europe and the World The ATEX sector in the European Union From the Market description, competitiveness analysis in the field of products and protective

More information

L'HOTELLIER

L'HOTELLIER Page 1 2011-11-04 L'HOTELLIER Amendment 39-16703 Docket No. FAA-2011-0506; Directorate Identifier 2010-SW-020-AD PREAMBLE Applicability: Portable Halon 1211 fire extinguisher, part number 863520-00, with

More information

Resource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes. Tokyo, 15 February 2016

Resource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes. Tokyo, 15 February 2016 Resource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes Tokyo, 15 February 2016 Policy context Europe 2020 Strategy: objectives on employment,

More information

ETICS and the EU Internal Market The European framework. G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products

ETICS and the EU Internal Market The European framework. G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products ETICS and the EU Internal Market The European framework G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products 1 THE EU CONSTRUCTION SECTOR The importance of the construction

More information

Building Standards Division. Whisky Maturation Warehouses Storage Buildings (Class 1) Automatic Fire Suppression Systems

Building Standards Division. Whisky Maturation Warehouses Storage Buildings (Class 1) Automatic Fire Suppression Systems Building Standards Division Whisky Maturation Warehouses Storage Buildings (Class 1) Automatic Fire Suppression Systems Crown Copyright 2015 Produced by the Buildings Standards Division February 2015 Version

More information

Council of the European Union Brussels, 5 September 2017 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union

Council of the European Union Brussels, 5 September 2017 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union Council of the European Union Brussels, 5 September 2017 (OR. en) 11882/17 COVER NOTE From: date of receipt: 4 September 2017 To: No. Cion doc.: Subject: ENV 727 MI 607 AGRI 443 CHIMIE 78 SAN 319 CONSOM

More information

Record of Amendments. Version Date Amendment Section/page affected

Record of Amendments. Version Date Amendment Section/page affected Industry support for effective compliance BTHA Guidance - The Low Voltage Directive (LVD) Directive 2014/35/EU On the harmonisation of the laws of the Member States relating to the making available on

More information

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,

More information

Airworthiness Directives; Kidde Aerospace Part Number (P/N) Hand-Held Halon Fire Extinguishers

Airworthiness Directives; Kidde Aerospace Part Number (P/N) Hand-Held Halon Fire Extinguishers [Federal Register: January 7, 2004 (Volume 69, Number 4)] [Rules and Regulations] [Page 864-867] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr07ja04-4] DEPARTMENT OF TRANSPORTATION

More information

The results of the impact assessment and of the workshop will be considered in the final proposal of the new directive.

The results of the impact assessment and of the workshop will be considered in the final proposal of the new directive. EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Conformity and standardisation, new approach, industries under new approach Mechanical and electrical equipment (including telecom terminal equipment)

More information

The New EU-Regulation on Construction Products

The New EU-Regulation on Construction Products The New EU-Regulation on Construction Products Dr. Rainer Mikulits Managing Director Austrian Institute of Construction Engineering (OIB) IRCC Meeting 12-14 May 2010, Tokyo, Japan Contents European Construction

More information

Technical Bulletin CE marking: from 1st July 2013

Technical Bulletin CE marking: from 1st July 2013 Technical Bulletin CE marking: from 1st July 2013 New regulation New obligations Same CE mark We are facing the most significant change for a decade in the way that construction products are manufactured

More information

BUSINESS PLAN CEN/TC 249 PLASTICS

BUSINESS PLAN CEN/TC 249 PLASTICS Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or

More information

Regulation (EC) 1272/2008 on Classification, labelling and packaging. (CLP Regulation) DG Environment

Regulation (EC) 1272/2008 on Classification, labelling and packaging. (CLP Regulation) DG Environment Regulation (EC) 1272/2008 on Classification, labelling and packaging of substances and mixtures (CLP Regulation) DG Environment GHS Global Context Rio, 1992 Chapter 19 of UNCED Agenda 21 Development by

More information

European Technical Approval ETA-08/0035 This ETA replaces ETA-08/0035 with validity from till

European Technical Approval ETA-08/0035 This ETA replaces ETA-08/0035 with validity from till SINTEF Building and Infrastructure P.O.Box 124 Blindern N-0314 Oslo Tel. 47 22 96 55 55 Fax 47 22 69 54 38 Authorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December

More information

Technical Paper. Functional Safety Update IEC Edition 2 Standards Update

Technical Paper. Functional Safety Update IEC Edition 2 Standards Update Technical Paper Functional Safety Update IEC 61511 Edition 2 Standards Update Functional Safety Update Table of Contents 1.0 Introduction 2.0 IEC 61511-1 changes 3.0 IEC 61511-2 changes 4.0 IEC 61511-3

More information

Panic and Emergency Exit Devices

Panic and Emergency Exit Devices Panic and Emergency Exit Devices BS EN 1125: 2008 & BS EN 179: 2008 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Panic and Emergency Exit Devices BS EN 1125: 2008 & BS EN 179: 2008 dhf

More information

HALON ALTERNATIVE FIRE EXTINGUISHER 3

HALON ALTERNATIVE FIRE EXTINGUISHER 3 HALON ALTERNATIVE FIRE EXTINGUISHER 3 4 HALON ALTERNATIVE FIRE EXTINGUISHER 5 MAKING THE IMPOSSIBLE POSSIBLE P3 AND ITS HAFEX BACKGROUND MAKING THE IMPOSSIBLE POSSIBLE Back in November 2014, OEMs were

More information

Council of the European Union Brussels, 21 March 2017 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union

Council of the European Union Brussels, 21 March 2017 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union Council of the European Union Brussels, 21 March 2017 (OR. en) 7528/17 COVER NOTE From: date of receipt: 20 March 2017 To: No. Cion doc.: Subject: MI 257 ENT 75 COMPET 200 DELACT 54 Secretary-General of

More information

Electrical equipment designed for use within certain voltage limits (LVD GUIDE)

Electrical equipment designed for use within certain voltage limits (LVD GUIDE) Electrical equipment designed for use within certain voltage limits (LVD GUIDE) August 2018 INTRODUCTION 1. These Low Voltage Directive Guidelines (LVD Guide) are intended to be a manual for all parties

More information

[Docket No. FAA ; Directorate Identifier 2012-NM-176-AD] Airworthiness Directives; DASSAULT AVIATION Airplanes

[Docket No. FAA ; Directorate Identifier 2012-NM-176-AD] Airworthiness Directives; DASSAULT AVIATION Airplanes This document is scheduled to be published in the Federal Register on 05/21/2013 and available online at http://federalregister.gov/a/2013-12077, and on FDsys.gov [4910-13-P] DEPARTMENT OF TRANSPORTATION

More information

Construction Products Directive

Construction Products Directive Construction Products Directive Evaluation of conformity of Coated glass to he N 1096-4 ( September 2006) G E P V P, T H E E U R O P E A N A S S O C I AT I O N O F F L AT G L A S S M A N U FA C T U R E

More information

BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the

More information

LOW VOLTAGE DIRECTIVE 2014/35/EU GUIDELINES. Electrical equipment designed for use within certain voltage limits

LOW VOLTAGE DIRECTIVE 2014/35/EU GUIDELINES. Electrical equipment designed for use within certain voltage limits LOW VOLTAGE DIRECTIVE 2014/35/EU GUIDELINES Electrical equipment designed for use within certain voltage limits November 2016 INTRODUCTION 1. These LOW VOLTAGE DIRECTIVE guidelines are intended to be a

More information

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the

More information

COMMISSION DELEGATED REGULATION (EU) /... of

COMMISSION DELEGATED REGULATION (EU) /... of EUROPEAN COMMISSION Brussels, 29.6.2017 C(2017) 4408 final COMMISSION DELEGATED REGULATION (EU) /... of 29.6.2017 amending Commission Delegated Regulation (EU) No 151/2013 of 19 December 2012 supplementing

More information

The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles

The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What

More information

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting

More information

SMB/4676/R STRATEGIC BUSINESS PLAN (SBP) Title of TC TC 62: Electrical equipment in medical practice

SMB/4676/R STRATEGIC BUSINESS PLAN (SBP) Title of TC TC 62: Electrical equipment in medical practice SMB/4676/R IEC/TC or SC TC 62 Secretariat Germany STRATEGIC BUSINESS PLAN (SBP) Date 2011-09-23 Please ensure this form is annexed to the Report to the Standardization Management Board if it has been prepared

More information

The products covered by the Regulation can be classified as follows:

The products covered by the Regulation can be classified as follows: Table of Contents 1. Purpose of the guidelines and disclaimer... 3 1.1. The Regulation... 3 2. Scope... 3 3. Product environmental impacts... 4 4. State of play of legislation... 4 4.1. History of the

More information

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - TF N 530 Rev.2 2012-04-13 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 Drafting

More information

Regulation 574_2014: Annex III CPR. and. Regulation 568_2014: Annex V CPR

Regulation 574_2014: Annex III CPR. and. Regulation 568_2014: Annex V CPR TF N 635 Regulation 574_2014: Annex III CPR and Regulation 568_2014: Annex V CPR 30-05-2014 28.5.2014 L 159/41 REGULATIONS COMMISSION DELEGATED REGULATION (EU) No 574/2014 of 21 February 2014 amending

More information

Table of Contents for the REGULATION (EU) 2017/745 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5 April 2017

Table of Contents for the REGULATION (EU) 2017/745 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5 April 2017 Chapter I o Scope and definitions Article 1 Subject matter and scope 13 Article 2 Definitions 15 Article 3 Amendment of certain definitions 20 Article 4 Regulatory status of products 20 Chapter II o Making

More information

Cable Ties JULY The electronic pdf version of this document found through is the officially binding version

Cable Ties JULY The electronic pdf version of this document found through  is the officially binding version p pproval roramms for U rcos orasato Mutual coto (M)No. 2.9 STANDARD FOR CERTIFICATION Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E012 Cable

More information

Belcom Cable excellence engineered through quality. CPR Construction Products Regulation

Belcom Cable excellence engineered through quality. CPR Construction Products Regulation CPR Construction Products Regulation Index Construction Products Regulation... 3 What is the Construction Products Regulation (CPR)... 4 What is the objective of the CPR... 4 Who does the application of

More information

COMMISSION DELEGATED REGULATION (EU) /... of

COMMISSION DELEGATED REGULATION (EU) /... of EUROPEAN COMMISSION Brussels, 20.3.2017 C(2017) 1703 final COMMISSION DELEGATED REGULATION (EU) /... of 20.3.2017 on the conditions for classification, without testing, of external renders and internal

More information

SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE)

SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE) SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE) SCS/SF/053-8 Issue 1 Sira Certification Service INTRODUCTION One of the conditions placed on all holders of Sira

More information

ECOS Position Paper: Further recommendations

ECOS Position Paper: Further recommendations Consultation Forum according to Art. 23 of Regulation (EU) No 517/2014 on fluorinated greenhouse gases: Barriers to the uptake of low-gwp alternatives to HFCs related to standards, codes and legislation

More information

Shipboard incinerators with capacities up to 4000 kw

Shipboard incinerators with capacities up to 4000 kw STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for Marine Equipment Directive (MED) No. 431.90 - MED A.1/2.7 Shipboard incinerators with capacities up to 4000 kw JANUARY

More information

Record of Amendments. Version Date Amendment Section/page affected

Record of Amendments. Version Date Amendment Section/page affected Industry support for effective compliance BTHA Guidance on The Restriction Of The Use Of Certain Hazardous Substances In Electrical and Electronic Equipment (recast) (RoHS) Directive 2011/65/EU Comparison

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IEC/TS 62647-21 Edition 1.0 2013-07 Process management for avionics Aerospace and defence electronic systems containing lead-free solder Part 21: Program management Systems engineering

More information

Council of the European Union Brussels, 30 September 2015 (OR. en)

Council of the European Union Brussels, 30 September 2015 (OR. en) Council of the European Union Brussels, 30 September 2015 (OR. en) Interinstitutional File: 2014/0136 (COD) 12298/15 NOTE From: To: General Secretariat of the Council Delegations T 196 MI 579 ECO 113 IND

More information

SOUTH ASIA REGIONAL INITIATIVE

SOUTH ASIA REGIONAL INITIATIVE SOUTH ASIA REGIONAL INITIATIVE 8 th SARI 21 WG meeting Prepared by: ED Kathmandu, 6 to 8 February 2018 MEETING PARTICIPANTS CAA Bangladesh CAA Maldives CAA Nepal Trans Maldivian Airways (1) Yeti Airlines

More information

Airworthiness Directive

Airworthiness Directive Airworthiness Directive AD No.: 2016-0024 Issued: 26 January 2016 EASA AD No.: 2016-0024 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008 on

More information

BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY Page: 1 Business environment BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY The 5 standards published by CEN/TC 208 since 1996 are used throughout the

More information

General safety precautions English

General safety precautions English English 1 1 1.1 About the documentation The original documentation is written in English. All other languages are translations. The precautions described in this document cover very important topics, follow

More information

[Docket No. FAA ; Directorate Identifier 2004-CE-25-AD; Amendment ; AD ]

[Docket No. FAA ; Directorate Identifier 2004-CE-25-AD; Amendment ; AD ] [Federal Register: October 22, 2004 (Volume 69, Number 204)] [Rules and Regulations] [Page 61993-61997] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr22oc04-3] DEPARTMENT

More information

FINAL DRAFT RTS CORRECTING DELEGATED REGULATION (EU) 528/2014 & 604/2014 EBA/RTS/2015/ July Final Report

FINAL DRAFT RTS CORRECTING DELEGATED REGULATION (EU) 528/2014 & 604/2014 EBA/RTS/2015/ July Final Report FINAL DRAFT RTS CORRECTING DELEGATED REGULATION (EU) 528/2014 & 604/2014 EBA/RTS/2015/09 16 July 2015 Final Report Final Draft Regulatory Technical Standards correcting Delegated Regulation (EU) No 528/2014

More information

Georgios Katsarakis European Commission

Georgios Katsarakis European Commission Georgios Katsarakis European Commission Single Market Strategy of the European Commission G. Katsarakis (DG GROW/C.1) The Single Market strategy of the European Commission In January 1985, the President

More information

BUSINESS PLAN CEN/TC 124 TIMBER STRUCTURES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 124 TIMBER STRUCTURES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 124 TIMBER STRUCTURES EXECUTIVE SUMMARY Business environment The wood and wood products industry is faced with cyclic demands from other industrial activities, such as construction,

More information

The New EMC Directive 2004/108/EC

The New EMC Directive 2004/108/EC The New EMC Directive 2004/108/EC In the process of the review I have tried to spell out in words what is often referred to as a section number. This helps reduce the need to flip pages as one reads this.

More information

GUIDANCE DOCUMENT ON THE ATEX DIRECTIVE TRANSITION FROM 94/9/EC TO 2014/34/EU

GUIDANCE DOCUMENT ON THE ATEX DIRECTIVE TRANSITION FROM 94/9/EC TO 2014/34/EU EUROPEAN COMMISSION Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Industrial Transformation and Advanced Value Chains Advanced Engineering and Manufacturing Systems GUIDANCE

More information

Circuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version

Circuit Breakers JANUARY The electronic pdf version of this document found through   is the officially binding version STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E001 Circuit Breakers JANUARY 2013 The electronic pdf version

More information

COMMISSION DELEGATED REGULATION (EU) /... of XXX

COMMISSION DELEGATED REGULATION (EU) /... of XXX EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX amending Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010,

More information

The European Radio Equipment Directive 2014/53/EU

The European Radio Equipment Directive 2014/53/EU TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing

More information

Lloyd s Register Type Approval System Test Specification Number 3

Lloyd s Register Type Approval System Test Specification Number 3 Working together for a safer world Lloyd s Register Type Approval System Test Specification Number 3 July 2015 Performance Test Specification for Equipment to be used in Marine Applications: Electric Cables

More information

RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY

RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY ("Official Gazette of RS, issue No. 13/2010) I INTRODUCTION Scope Article 1 This Rulebook stipulates the essential requirements that shall be met with regard to

More information

BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY Business Environment CEN/TC 239 is engaged in the standardization of ambulances as emergency medical vehicles and/or crafts and their associated

More information

Implementation Guidance for ISO 9001:2008

Implementation Guidance for ISO 9001:2008 Document: ISO/TC 176/SC 2/N 836 Our ref Secretariat of ISO/TC 176/SC 2 Date: 15 October 2008 Implementation Guidance for ISO 9001:2008 CONTENTS 1.0 INTRODUCTION 2.0 BACKGROUND ON ISO 9001:2008 REVISION

More information

This is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)

This is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System) QC 080000 Edition 3.0 2012-05 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Hazardous Substance Process Management System Requirements (HSPM) INTERNATIONAL ELECTROTECHNICAL

More information

Guidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014

Guidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014 Guidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014 11 July 2017 ESMA70-151-435 Table of Contents 1 Scope... 3 2 Purpose... 5 3 Compliance and reporting obligations...

More information

Council Directive 93/68/EEC of 22 July 1993 amending Directives

Council Directive 93/68/EEC of 22 July 1993 amending Directives Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility),

More information

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group Pressure D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design

More information

HazLoc Essential Guides:

HazLoc Essential Guides: HazLoc Essential Guides: Intertek Deeside Lane, Chester, CH1 6DD UK hazloc@intertek.com 01244 882590 www.intertek-hazloc.com Introduction This white paper aims to clarify ATEX Technical Files. As a Notified

More information

Guided Learning Hours (GLH) 4 Invigilated Assessment (IA) 1 Total Qualification Time (5)

Guided Learning Hours (GLH) 4 Invigilated Assessment (IA) 1 Total Qualification Time (5) Qualification: Date Completed: 31 Jan 17 Unit: FIA AO Level 2 Environmental for Field Service Technicians Development Group: FD&A Development Group Guided Learning Hours (GLH) 4 Invigilated Assessment

More information

Investigation Report

Investigation Report Bundesstelle für Flugunfalluntersuchung German Federal Bureau of Aircraft Accident Investigation Investigation Report Identification Type of Occurrence: Serious incident Date: 15 August 2011 Location:

More information