Intermediate report of the Secretariat on activities of CEN/TC 305 "Potentially explosive atmospheres Explosion prevention and protection"

Size: px
Start display at page:

Download "Intermediate report of the Secretariat on activities of CEN/TC 305 "Potentially explosive atmospheres Explosion prevention and protection""

Transcription

1 N 926 "Potentially explosive atmospheres Explosion prevention and protection" Intermediate report of the Secretariat on activities of 305 "Potentially explosive atmospheres Explosion prevention and protection" 1 Constitution Scope Standardisation in the field of explosion prevention and protection. Drawing up of standards relating to test methods for determining the flammability characteristics of substances, equipment and protective systems for use in potentially explosive atmospheres, equipment and systems for explosion prevention and protection and terminology and methodology in the field of potentially explosive atmospheres. Members of 305 are the 32 member bodies of CEN, the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. NOTE: Turkey became member of CEN and CENELEC on Chairman of 305: Prof. Dr.-Ing. Siegfried Radandt, Germany Secretariat of 305: Dipl.-Phys. Thomas von Hoegen, DIN, Germany. Liaisons: Commission of the European Communities (CEC) European Chemical Industry Council (CEFIC) European Trade Union Technical Bureau for Health and Safety (TUTB) CENELEC/TC 31 Electrical apparatus for explosive atmospheres: General requirements Industrial valves Industrial trucks Food processing machinery - Safety and hygiene specifications Conveyor belts Fixed fire fighting systems Machines for underground mines Safety SECRETARIAT DIN DEUTSCHES INSTITUT FÜR NORMUNG e.v. mailing address: Berlin Tel: Fax:

2 Pumps Internal combustion engines Liquefied petroleum gas equipment and accessories 2 Organization The following working groups are set up under 305: WG 1 WG 2 WG3 WG4 WG5 Test methods for determining the flammability characteristics of substances Convener: Dr. Sheila Beattie, United Kingdom Secretariat: Dr. Stephen Puttick, Syngenta, UK Equipment for use in potentially explosive atmospheres Convener: Alan Tyldesley, United Kingdom Secretariat: DIN, Anke Sachtleben, DE Devices and systems for explosion prevention and protection Convener: Dr. Kees van Wingerden, Norway Secretariat: DIN, Anke Sachtleben, DE Terminology and Methodology Convener: Dr. Albrecht Vogl, DE Secretariat: DIN, Anke Sachtleben, DE Equipment and protection systems for mining Convener: Dr. Elmar Fuchs, Germany Secretariat: DIN, Hans Georg Blasgude, DE 3 Plenary meetings 1 st Mannheim, Germany /06 Report: N 19 2 nd St. Denijs, Belgium /23 Report: N 43 3 rd Antwerp, Belgium /07 Report: N 70 4 th Bergen, Norway /22 Report: N th Lucerne, Switzerland /08 Report: N th Paris, France Report: N th London, United Kingdom /26 Report: N th Berlin, Germany /07 Report: N th Mannheim, Germany Report: N th Oslo, Norway Report: N th Berlin, Germany Report: N th Stockholm, Sweden Report: N th Prague, Czech Republic /05 Report: N 663 (meeting together with CENELEC/TC 31) 14 th Berlin, Germany /16 Report: N 729 (meeting together with CENELEC/TC 31) 15 th Dublin, Ireland /30 Report: N 783 (meeting together with CENELEC/TC 31) 2

3 16 th Braunschweig, Germany /29 Report: N 871 (meeting together with CENELEC/TC 31) 17 th Milan, Italy /24 Report: N 921 (meeting together with CENELEC/TC 31) 4 Published European Standards and CEN Technical Reports 4.1 Production of the last five years 2006: 7 documents 2007: 8 documents 2008: 2 documents 2009: 2 documents 2010: 1 document 2011: 10 documents: EN , EN 15967, EN , EN 16020, EN 16009, EN ISO/IEC , amendments to EN to List of all documents published by 305: EN :20011 WG 4 Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology EN :2002+A1:2008 WG 5 Explosive atmospheres Explosion prevention and protection Part 2: Basic concepts and methodology for mining EN 1710:2005+A1:2008 WG 5 Equipment and components intended for use in potentially explosive atmospheres in underground mines EN 1839:2003 WG 1 Determination of explosion limits of gases and vapours EN 13237:2003 WG 4 Potentially explosive atmospheres Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres EN :2009 WG 2 Non-electrical equipment for potentially explosive atmospheres Part 1: Basic method and requirements EN :2004 WG 2 Non-electrical equipment for use in potentially explosive atmospheres Part 2: Protection by flow restricting enclosure "fr" EN :2005 WG 2 Non-electrical equipment for use in potentially explosive atmospheres Part 3: Protection by flame proof enclosure "d" EN :2011 WG 2 Non-electrical equipment for potentially explosive atmospheres Part 5: Protection by constructional safety "c" EN :2005 WG 2 Non-electrical equipment for use in potentially explosive atmospheres Part 6: Protection by control of ignition source "b" 3

4 EN :2003 WG 2 Non-electrical equipment for potentially explosive atmospheres Part 8: Protection by liquid immersion "k" EN 13821:2002 WG 1 Potentially explosive atmospheres Explosion prevention and protection Determination of minimum ignition energy of dust/ air mixtures EN :2004+A1:20011 WG 1 Determination of explosion characteristics of dust clouds Part 1: Determination of the maximum explosion pressure p max of dust clouds EN :2006+A1:20011 WG 1 Determination of explosion characteristics of dust clouds Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt) max of dust clouds EN :2006+A1:20011 WG 1 Determination of explosion characteristics of dust clouds Part 3: Determination of the lower explosion limit LEL of dust clouds EN :2004+A1:20011 WG 1 Determination of explosion characteristics of dust clouds Part 4: Determination of the limiting oxygen concentration LOC of dust clouds EN 14373:2005 WG 3 Explosion suppression systems EN 14460:2006 WG 3 Explosion resistant equipment EN 14491: Corrigendum 2008 Dust explosion venting protective systems WG3 EN 14522:2005 WG 1 Determination of the auto ignition temperature of gases and vapours EN : Corrigendum:2006 WG 5 Explosion prevention and protection in underground mines Protective systems Part 1: 2-bar explosion proof ventilation structure EN : Corrigendum 2008 Explosion prevention and protection in underground mines Protective systems Part 2: Passive water trough barriers EN : Corrigendum 2008 Explosion prevention and protection in underground mines Protective systems Part 4: Automatic extinguishing systems for road headers WG5 WG5 4

5 EN 14756:2006 WG 1 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours EN 14797:2006 WG 3 Explosion venting devices EN 14983:2007 WG 5 Explosion prevention and protection in underground mines Equipment and protective systems for firedamp drainage EN 14986: 2007 WG 2 Design of fans working in potentially explosive atmospheres EN 14994:2007 WG 3 Gas explosion venting protective systems EN 15089:2009 WG 3 Explosion isolation systems EN 15188:2007 WG 1 Determination of the spontaneous ignition behaviour of dust accumulations EN 15198:2007 WG 4 Methodology for the ignition hazard assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres EN 15233:2007 WG 4 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres EN 15967:2011 WG 1 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours EN 16009:2011 WG 3 Flameless explosion venting devices EN 16020:2011 WG 3 Explosion diverters EN ISO 16852:2010 WG 3 Flame arrester Performance requirements, test methods and limits for use (ISO 16852:2008, including Cor 1:2008 and Cor 2:2009) CEN/TR 15281:2006 WG 3 Guidance on inerting for the prevention of explosions EN ISO/IEC :2011 WG 4 Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC DIS :2011) 5 Program of work The projects in the table below are in the order of drafting body (working group), then WI status (active or waiting/preliminary), then ordered by WI number. 5

6 Drafting Body WI Number Reference 305/WG 1 ' FprEN /WG 1 ' /WG 1 ' /WG 1 ' /WG 1 ' /WG 1 ' /WG 2 ' pren rev pren rev pren rev pren ISO pren ISO/IEC Title WI Status Registration Last Milestone Name Last Realised Milestone Forecast Determination of explosion limits of gases and vapours Active Dispatch of FV draft to CMC Submission to Vote March 2012 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds and Determination of the maximum Circulation of rate of explosion pressure rise WI 1st Working (dp/dt)max of dust clouds Active proposal - Accept Document Determination of the spontaneous ignition behaviour of dust accumulations Combustion propagation behaviour of dust layers by classification into burning classes Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification test methods and data Explosive atmospheres - Nonelectrical equipment for use in explosive atmospheres - Basic method and requirements Active stage Accept stage Accept stage Accept stage Accept ISO-CEN WI proposal - Accept Parallel enquiry May 2012 SECRETARIAT DIN DEUTSCHES INSTITUT FÜR NORMUNG e.v. mailing address: Berlin Tel: Fax:

7 Drafting Body WI Number Reference Title WI Status Registration Explosive atmospheres - Nonelectrical equipment for use in explosive atmospheres - Non electrical type of protection constructional safety, control of ignition source, liquid immersion Active Last Milestone Name Last Realised Milestone Forecast ISO-CEN 305/WG 2 ' pren ISO/IEC WI proposal - Accept Parallel enquiry May 2012 Design of fans working in pren potentially explosive 305/WG 2 ' rev atmospheres stage Accept Circulation of WI 1st Working 305/WG 3 ' Explosion isolation flap valves Active proposal - Accept Document Dust explosion venting Dispatch of FV draft Submission to 305/WG 3 ' FprEN protective systems Active to CMC Vote Explosion prevention and 305/WG 3 ' protection for bucket elevators stage Accept Screw Conveyors and product receivers as explosion 305/WG 3 ' isolation systems stage Accept pren /WG 3 ' rev Explosion resistant equipment stage Accept pren Explosion suppression 305/WG 3 ' rev systems stage Accept pren /WG 3 ' rev Explosion venting devices stage Accept Potentially explosive Dispatch of 305/WG 4 ' pren atmospheres - Terms and Active Closure of enquiry FV draft to

8 Drafting Body WI Number 305/WG 5 ' Reference pren ISO/IEC Title definitions for equipment and protective systems intended for use in potentially explosive atmospheres Explosive atmospheres - Equipment and components in explosive atmospheres in underground mines WI Status Registration Last Milestone Name Last Realised Milestone CMC Forecast ISO/IEC-CEN Parallel stage enquiry May

9 Deleted project from the active program of work: None. 7 Regular review of standards The following standards were up to systematic 5-years review in 2011: EN 14756:2006 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours - confirmed EN 14797:2006 Explosion venting devices - confirmed EN 14491:2006 Dust explosion venting protective systems- confirmed The following standards are up to systematic 5-years review in 2012: EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations EN 14994:2007 Gas explosion venting protective systems EN 14983:2007 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage EN :2007 Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers EN :2007 Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers EN :2002+A1:2008 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines th plenary meeting on /24 Remark from TC secretary In the plenary meeting of 305 the following resolution was taken: RESOLUTION 233/2011 taken by 305 on in principle agrees to the draft Commission mandate for standardisation in the field of equipment used in the offshore oil and gas industry (document 305 N 906) but cannot agree to the proposed timetable. 305 asks WG 2 and WG 3 to propose specific possible projects before the end of The following two projects were proposed and agreed upon by the TC members by postal ballot after the plenary meeting. - Explosion venting devices for compressor buildings and offshore modules. - Explosion testing of passive fire protection systems. A detailed description of the two proposals will be provided to the CCMC by separate mail. 9. Joint meeting of CLC/TC31 and 305 on the 24 th October 2011 Experience with the new format of Annex ZY "State of the art" It was concluded that the 305 and CENELEC/TC 31 are dealing with the issue of the Annex ZY in a satisfactory manner. Whether the concept of Annex ZY will be taken over by IEC/TC 31 is under discussion. SECRETARIAT DIN DEUTSCHES INSTITUT FÜR NORMUNG e.v. mailing address: Berlin Tel: Fax:

10 The draft proposals for projects under draft Commission mandate for standardisation in the field of equipment used in the offshore oil and gas industry were discussed in the joint meeting. There were no objections against the proposals from 305 as mentioned under item 8. 8 Co-operation with IEC/TC 31/SC 31M 8.1 Plenary meetings of IEC/TC 31/SC 31M 1st Kuala Lumpur, Malaysia Report: N 672 2nd Sao Paulo, Brazil Report: N 732 3rd Tel Aviv, Israel Report: N 788 4th Seattle, US Report: N 860 5th Melbourne, AU Report: N List of projects in IEC/TC 31 SC 31M ISO DIS Ed. 1.0: Explosive atmospheres - Non-electrical equipment for use in explosive atmospheres - Basic method and requirements (basis: EN ) The Committee Draft for voting (equal to the DIS stage in ISO) has been prepared by the project team in SC 31M. The enquiry will be launched in the second quarter of 2012 in parallel with 305. NOTE: This document deals primarily with non-electrical issues. Following the agreement between ISO/TMB and IEC/SMB this document will become an ISO-standard. Project leader: Thierry Houeix, France ISO DIS Ed. 1.0: Explosive atmospheres - Non-electrical equipment for use in explosive atmospheres - Non electrical type of protection constructional safety 'c', control of ignition source 'b', liquid immersion 'k' (basis: EN , EN , EN ) The Committee Draft for voting (equal to the DIS stage in ISO) has been prepared by the project team in SC 31M. The enquiry will be launched in the second quarter of 2012 in parallel with 305. NOTE: This document deals primarily with non-electrical issues. Following the agreement between ISO/TMB and IEC/SMB this document will become an ISO-standard. Project leader: Konrad Brehm, Germany. ISO/IEC CDV Explosive atmospheres - Non-electrical equipment for use in explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (basis: EN 1710) The Committee Draft for voting (equal to the DIS stage in ISO) has been prepared by the project team in SC 31M. The enquiry will be launched in the second quarter of 2012 in parallel with 305. NOTE: This document deals with electrical as well as non-electrical issues. Following the agreement between ISO/TMB and IEC/SMB this document will become a double logo ISO/IEC-standard. Project leader: Dr Fuchs, Germany MT Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification test methods and data from TC 31 to SC 31M IEC Ed.1 has been published in January Within this document the old standards and reports IEC , -4, -4A, -12 and -20 have been merged. In its plenary meeting in October 2010 IEC/TC 31 has taken the decision to disband the previous MT and to start the Maintenance Procedure in IEC/SC 31M. Thus a new 10

11 MT has been established to maintain the IEC A call for experts was send out and sufficient experts have been nominated to start the maintenance work. NOTE: In October 2012 a joint meeting of MT and 305/WG 1 will take place within the IEC General Meeting in Oslo Maintenance team leader: Martin Thedens, Germany. MT Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods This project has been transferred from IEC/TC 31/SC 31J. The last meeting of the MT took place in Melbourne (interim convenor Stephen Puttick, secretary 305/WG 1). The main achievement of this meeting was that an agreement could be found on all outstanding issues from the discussion about definitions. Maintenance team leader: Donald W. Ankele, US Under discussion: New project for protective systems The interest in this project has been expressed by individual experts from non-european countries, however there is still a lack of participation from outside of Europe in this group. It is expected that there will be a further meeting in 2012 of the ad-hoc-group 3. Convenor: Kees van Wingerden, Norway Thomas von Hoegen,

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16829 August 2016 ICS 13.220.40; 13.230; 53.040.10 English Version Fire and explosion prevention and protection for bucket elevators Prévention

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 335/02)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 335/02) C 335/10 EN Official Journal of the European Union 9.10.2015 Commission communication in the framework of the implementation of Directive 94/9/EC of the European Parliament and of the Council of 23 March

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 126/02)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 126/02) 8.4.2016 EN Official Journal of the European Union C 126/13 Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the

More information

(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION

(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION 8.4.2016 EN Official Journal of the European Union C 126/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework

More information

(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION

(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION 8.9.2017 EN Official Journal of the European Union C 298/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework

More information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 092/02)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 092/02) 9.3.2018 EN Official Journal of the European Union C 92/87 Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the harmonisation

More information

C 319/6 Official Journal of the European Union

C 319/6 Official Journal of the European Union C 319/6 Official Journal of the European Union 5.11.2013 Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council of 23 March

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1187 January 2012 ICS 13.220.50; 91.060.20 Supersedes ENV 1187:2002 English Version Test methods for external fire exposure

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux

More information

National foreword. Text affected

National foreword. Text affected PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14972 May 2008 ICS 13.220.20 English Version Fixed firefighting systems - Watermist systems - Design and installation Installations

More information

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16411 December 2014 ICS 97.190 Supersedes CEN/TR 16411:2014 English Version Child use and care articles - 2014 compiled interpretations of

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

Report on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1

Report on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1 Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28

More information

English version. Alarm systems Terms and definitions

English version. Alarm systems Terms and definitions TECHNICAL REPORT CLC/TR 50531 RAPPORT TECHNIQUE TECHNISCHER BERICHT June 2009 ICS 01.040.13;13.320 English version Alarm systems Terms and definitions Systèmes d'alarme Termes et définitions Alarmanlagen

More information

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods INTERNATIONAL STANDARD ISO 7458 Second edition 2004-03-01 Glass containers Internal pressure resistance Test methods Récipients en verre Résistance à la pression interne Méthodes d'essai Reference number

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Récipients en verre Bagues à crans pour bouchage sous vide Partie 1: Généralités Reference

More information

Official Journal of the European Union

Official Journal of the European Union C 20/16 27.1.2009 Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council on the approximation of the laws of the Member States

More information

ÍST EN :2015. Gildistaka ICS: 53.06

ÍST EN :2015. Gildistaka ICS: 53.06 ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1749 June 2014 ICS 91.140.40 Supersedes CEN/TR 1749:2009 English Version European scheme for the classification of gas appliances according

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 81-10 November 2008 ICS 91.140.90 Supersedes CEN/TR 81-10:2004 English Version Safety rules for the construction and installation of lifts

More information

Camping tents (ISO 5912:2011)

Camping tents (ISO 5912:2011) Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

ÍST EN :2013. Gildistaka ICS: 75.2

ÍST EN :2013. Gildistaka ICS: 75.2 ÍST EN 14678-3:2013 Gildistaka 1.5.2013 ICS: 75.2 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at private

More information

ALARM SYSTEMS - INTRUSION AND

ALARM SYSTEMS - INTRUSION AND IRISH STANDARD I.S. CLC/TS 50131-4:2006 ICS 13.310 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS -- PART 4: WARNING Tel: +353 1 807 3800

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT CLC/TR 62125 RAPPORT TECHNIQUE TECHNISCHER BERICHT April 2008 ICS 13.020.01; 29.060.20 English version Environmental statement specific to TC 20 - Electric cables (IEC/TR 62125:2007) Déclaration

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the

More information

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions)

English Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions) TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1335-4 October 2009 ICS 97.140 English Version Office furniture - Office work chair - Part 4: Clarifications to EN 1335-1:2000 (Dimensions)

More information

REFRIGERATING SYSTEMS AND HEAT

REFRIGERATING SYSTEMS AND HEAT IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16629 July 2014 ICS 91.140.99 English Version Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards

More information

CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved

CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved CEN/TC 256 Overview Presentation to ISCC January 2017 C Cork Chair CEN/TC 256 Overview of presentation CEN/TC 256 Organisation Developments in 2016 Key outputs Activities for 2017 2 CEN/TC 256 Committee

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties INTERNATIONAL STANDARD ISO 9311-1 First edition 2005-08-15 Adhesives for thermoplastic piping systems Part 1: Determination of film properties Adhésifs pour réseaux de tuyauteries en matières thermoplastiques

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16165 April 2012 ICS 17.040.20; 93.080.10 English Version Determination of slip resistance of pedestrian surfaces - Methods

More information

Founding - Magnetic particle testing

Founding - Magnetic particle testing Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus

More information

English version. Management Centre: Avenue Marnix 17, B Brussels

English version. Management Centre: Avenue Marnix 17, B Brussels TECHNICAL REPORT CLC/TR 62061-1 RAPPORT TECHNIQUE TECHNISCHER BERICHT August 2010 ICS 13.110; 25.040.99; 29.020 English version Guidance on the application of ISO 13849-1 and IEC 62061 in the design of

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 12831-2 April 2017 ICS 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of the design heat load

More information

ILNAS-EN 62560:2012/A1:2015

ILNAS-EN 62560:2012/A1:2015 ILNAS-EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lampes à LED autoballastées pour l'éclairage général fonctionnant à des tensions

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14983:2007 Plahvatuse vältimine ja kaitse allamaakaevanduses. Seadmed ja kaitsesüsteemid kaevandusgaasidest põhjustatud kahjustuste puhuks Explosion prevention and protection in underground

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12921-3:2005 Masinad tööstuslike detailide pindade puhastamiseks ja eeltöötlemiseks vedelike või aurude abil. Osa 3: Süttimisohtlike puhastusvedelikke kasutavate masinate ohutus Machines

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CLC/TR 50670 December 2016 ICS 13.220.50; 27.160; 91.060.20 English Version External fire exposure to roofs in combination with photovoltaic (PV)

More information

CEN/TC 442 Decisions taken /16

CEN/TC 442 Decisions taken /16 CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct

More information

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015

Sýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear Paints and varnishes

More information

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16792 December 2014 ICS 61.020; 97.190 English Version Safety of children's clothing - Recommendations for the design and manufacture of children's

More information

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305

More information

ILNAS-EN ISO 23640:2015

ILNAS-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen

More information

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -

More information

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test INTERNATIONAL STANDARD ISO 22476-3 First edition 2005-01-15 Geotechnical investigation and testing Field testing Part 3: Standard penetration test Reconnaissance et essais géotechniques Essais en place

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance INTERNATIONAL STANDARD ISO 17707 First edition 2005-07-01 Footwear Test methods for outsoles Flex resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la flexion Reference

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18750 May 2015 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - Cooperative systems - Definition

More information

About European Standards

About European Standards About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization

More information

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications

More information

The national standards bodies of:

The national standards bodies of: EN 1317 for Vehicle Restraint Systems (VRS) - overview presented by B. Wolfgang Wink Senior Manager International Division Volkmann & Rossbach Germany 16th World Meeting International Road Federation Lisboa

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1565-2 May 2012 ICS 23.040.20; 91.140.80 Supersedes ENV 1565-2:2001 English Version Plastics piping systems for soil and

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing INTERNATIONAL STANDARD ISO 22777 First edition 2004-12-15 Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing Chaussures Méthodes d'essai pour

More information

Sýnishorn Maintenance - Qualification of maintenance personnel

Sýnishorn Maintenance - Qualification of maintenance personnel ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD

More information

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16429 March 2013 ICS 13.040.40 English Version Stationary source emissions - Sampling and determination of hydrogen chloride

More information

Sýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

Sýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals ÍSLENSKIR STAÐLAR CEN/TS 16244:2018 Gildistaka 15.5.2018 ICS: 91.04 Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50625-3-1 January 2015 ICS 29.100.01; 13.030.99; 31.220.01 English Version Collection, logistics & treatment requirements

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16798-18 June 2017 ICS 91.120.10; 91.140.30 English Version Energy performance of buildings - Ventilation for buildings - Part 18: Interpretation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 60079-30-2:2007 Explosive - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance Explosive - Part 30-2: Electrical resistance

More information

Personal protective equipment - Safety footwear (ISO 20345:2011)

Personal protective equipment - Safety footwear (ISO 20345:2011) Irish Standard Personal protective equipment - Safety footwear (ISO 20345:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16677 May 2014 ICS 11.040.70 English Version Ophthalmic optics - Reference method for the testing of spectacle frames and

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif

More information

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL

More information

Standing Committee ATEX 94/9/EC (Working Group) Brussels, 2 nd December 2004 Draft Meeting Report

Standing Committee ATEX 94/9/EC (Working Group) Brussels, 2 nd December 2004 Draft Meeting Report EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Conformity and standardisation, new approach, industries under new approach Mechanical and electrical equipment (including telecom terminal equipment)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 13443:2005 Natural gas - Standard reference conditions Natural gas - Standard reference conditions EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-6 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy

More information

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135. TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1366-7:2004 Fire resistance tests for service installations - Part 7: Conveyor systems and their closures Fire resistance tests for service installations - Part 7: Conveyor systems

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This

More information

Sýnishorn Safety of woodworking machines - One side thickness planing machines

Sýnishorn Safety of woodworking machines - One side thickness planing machines EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16244 April 2018 ICS 91.040.10; 91.140.30 English Version Ventilation in hospitals - Coherent hierarchic structure and common

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12215:2005 Pindamisseadmed. Pihustuskambrid orgaaniliste vedelate kattematerjalide pealekandmiseks. Ohutusnõuded Coating plants - Spray booths for application of organic liquid coating

More information

English version. Railway applications Systematic allocation of safety integrity requirements

English version. Railway applications Systematic allocation of safety integrity requirements TECHNICAL REPORT CLC/TR 50451 RAPPORT TECHNIQUE TECHNISCHER BERICHT May 2007 ICS 45.020;93.100 Supersedes R009-004:2001 English version Railway applications Systematic allocation of safety integrity requirements

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16422 October 2012 ICS 59.080.30 English Version Classification of thermoregulatory properties Classement des propriétés de thermorégulation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14470-1:2004 Fire safety storage cabinets - Part 1: Safety storage cabines for flammable liquids Fire safety storage cabinets - Part 1: Safety storage cabines for flammable liquids

More information

SANS 21-1:2009 Edition 1 EN 115-1:2008

SANS 21-1:2009 Edition 1 EN 115-1:2008 ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15310-4 November 2006 ICS 13.030.10; 13.030.20 English Version Characterization of waste - Sampling of waste materials - Part 4: Guidance on

More information

Personal protective equipment - Test methods for footwear (ISO 20344:2011)

Personal protective equipment - Test methods for footwear (ISO 20344:2011) Irish Standard Personal protective equipment - Test methods for footwear (ISO 20344:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national

More information

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code IRISH STANDARD I.S. EN 62382:2007 ICS 25.040.01 ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1401-2 May 2012 ICS 23.040.01; 93.030 Supersedes ENV 1401-2:2000 English Version Plastics piping systems for non-pressure

More information

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system Resistance welding - Welding current measurement for resistance

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular INTERNATIONAL STANDARD ISO 9100-12 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 12: 89 regular Récipients en verre Bagues à crans pour bouchage sous vide Partie 12: 89 regular Reference

More information

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) Irish Standard Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) NSAI 2011 No copying without NSAI permission except as permitted

More information

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.

More information

Contents. EN :2012 (E) Issue 5 ( ) Page

Contents. EN :2012 (E) Issue 5 ( ) Page Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...

More information

ICS Supersedes CLC/TS 62046:2005. English version

ICS Supersedes CLC/TS 62046:2005. English version TECHNICAL SPECIFICATION CLC/TS 62046 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION May 2008 ICS 13.110 Supersedes CLC/TS 62046:2005 English version Safety of machinery - Application of protective equipment

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16798-4 June 2017 ICS 91.120.10; 91.140.30 English Version Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15316-6-7 April 2017 ICS 27.160; 91.120.10; 91.140.10 English Version Energy performance of buildings - Method for calculation of system energy

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1395-7:2007 Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed system Thermal spraying - Acceptance inspection of thermal spraying equipment

More information

ILNAS-EN ISO :2017

ILNAS-EN ISO :2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13842:2004 Oil fired forced convection air heaters - Stationary and transportable for space heating Oil fired forced convection air heaters - Stationary and transportable for space

More information

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005.

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005. IRISH STANDARD I.S. EN 10298:2005 ICS 23.040.10 23.040.40 25.220.99 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL

More information