SYSTEM. field cuttable. lipleds 8200 Series

Transcription

1 lipleds 8200 Series Replaceable LED Boards 24V CRI > 90 field cuttable SYSTEM DIMMING Forward Phase (TRA) 0-10V (TRA-E) Hi-Lume 1% A Series (2 Wire) Hi-Lume 1% (3 Wire) Title 24 JA8 (JA8) EFFICACY 108 Lumens Per Watt L70 LED LIFE 60,000 hrs. DRY OR WET (IP65 or IP67) LOCATION UL2108, CSA C22.2#9 UL8750, CSA250 lipleds TM Series is a field cuttable system designed with long life, energy efficient LEDs that result in low maintenance installations. lipleds TM is excellent to illuminate areas for cove lighting, accent lighting, backlighting, and other indirect lighting applications. MADE IN USA 10-DAY Lighting for the Professional Designer

2 Applications VOLTAGE Lamp Type Accent, Decorative Lighting 24VDC Modular LEDs lipleds 8200 SERIES FEATURES lipleds 8200 series is a 24 volt system that requires a 24VDC (secondary side) transformer. The standard primary side voltage on our transformers is 120V or 277V. Consult factory for other primary side voltages. See transformer brochure for additional information. DIMMING Length CONSTRUCTION MOUNTING CRI > 90 efficacy VIEWING ANGLE Forward Phase (TRA) 0-10V (TRA-E) Hi-Lume 1% A Series (2 Wire) Hi-Lume 1% (3 Wire) Title 24 JA8 (JA8) Built to Order LED Modules (Field Cuttable - Dry Location Only) Mounting Clips or Mounting Channel 108 Lumens per Watt 120 Degrees L70 LED LIFE MAXIMUM RUN *1 (5 Amps) LISTING 60,000 hrs. 20' (6W) 30 (4W) 36 (2W) Dry or Wet (IP65 or IP67) Location UL2108, CSA C22.2#9 UL8750, CSA250 2 lipleds LLED8200 California Accent Lighting, Inc CALI

3 PERFORMANCE Color Vector Graphic TM-30 METRIC RESULT NOTES R f 92 IES TM Fidelity Index Rg 101 IES TM Gamut Index CIE R a 96 CIE Test Color Method General Index R 9 72 CIE Test Color Method Sample Nine Score R f, skin 95 Average of CES15 and CES18 (skin) CCT 3423 Correlated Color Temperature D uv Distance from blackbody locus Reference Illuminant x CIE 1931 chromaticity coordinate y CIE 1931 chromaticity coordinate Polar Graph u CIE 1960 chromaticity coordinate v CIE 1960 chromaticity coordinate 158 u CIE 1976 chromaticity coordinate v CIE 1976 chromaticity coordinate Maximum Candela = Located At Horizontal Angle = 0, Vertical Angle = 0 # 1 - Vertical Plane Through Horizontal Angles (0-180) (Through Max. Cd.) # 2 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.) Chromaticity Diagram Y 0.9 LAMP NUMBER Description LED-2.4K 2400K Incandescent White LED-2.7K 2700K Warm White , LED-3.0K LED-3.5K 3000K Warm White 3500K Neutral White X LED-4.0K LED-4.5K 4000K Neutral White 4500K Cool White calilighting.com California Accent Lighting, Inc. lipleds LLED8200 3

4 Lens and SINGLE Light Strip 2W 4W 6W LLED8200 lightstrip is field-cuttable every 6 for easy installation without rigorous requirements. Clear Lens (CL) 50% Semi-Frosted Lens (SF) Frosted Lens (F) Dry Location 2W, 4W Wet (IP67) Location 2W, 4W W.42 6W 8' maximum extrusion and lens length (Dry location field cuttable) W (Max 36'), 4W (Max 30').33 6W (Max 20').42 How to Order or Specify Series OPTICS Watts per Foot LLED8200* 6 LLED8200-RPM Clear Lens 2 Watts (2W) Forward Phase LED-2.4K LLED8200-CM* 6 LLED8200-SR* 7 (CL)* 8 (216 Lumens/ft) (DM) LED-2.7K LLED8200-CMC LLED8200-ST 50% Semi-Frosted Lens 4 Watts (4W) 0-10V LED-3.0K LLED8200-CR LLED8200-UC* 6 (SF) (432 Lumens/ft) (10V) LED-3.5K DIMMING LAMP dry OR wet FINISH (CHANNELS) Indoor (DRY) Outdoor IP65 (WET)* 6 LLED8200-HC LLED8200-UCS* 7 LED-4.0K 100% Frosted Lens 6 Watts (6W) Hi-Lume 1% A Outdoor (F) (648 Lumens/ft) (2 Wire)* IP67 LLED8200-L* 3 8 LLED8200-WMC LED-4.5K (WET)* 6 LLED8200-LPG LLED8200-LR LLED8200-OL LLED8200-RC LLED8200-WMR Hi-Lume 1% (3 Wire)* 4 Title 24 JA8 (JA8) Natural Silver (NA)* 2 Polished (PA) White (WH) Satin (SA) Black (BK) Green (GN) Red (RD) Silver (SR) Custom Powder Coat (PC) LLED8200-RCR LLED8200-RME Leave Blank for Non-Dimming EXAMPLE: LLED8200-CL-2W-DM-LED-3.0K-DRY-NA *1 Maximum run based on 5 amps for class II applications: 14 (6W), 24 (4W), 36 (2W) *2 Standard finish - Natural Silver if left blank (Finish does not apply to LLED8200, LLED8200-ST, or LLED8200-ST-F) *3 40 watt max Hi-Lume Lutron 1% A #LTEA4U1UKL-CV240 *4 40 watt max Hi-Lume Lutron 1% #L3DA4U1UKL-CV240 *5 Run lengths required for Wet Location products (To ensure proper seal) *6 No optics available *7 Add.23" to overall height for optics *8 Standard lens Clear if left blank 4 lipleds LLED8200 California Accent Lighting, Inc CALI

5 SURFACE MOUNT ±.015" Tolerance LLED8200 (2W) LLED8200 (4W) LLED8200 (6W) LLED8200-UC LLED8200-ST LLED8200-ST 2W, 4W 6W No Lens LLED8200-WMC.73 LLED8200-L 15, 30, 45, 60 LLED8200-SR 15, 30, 45, RECESS MOUNT LLED8200-UCS 15, 30, 45, LLED8200-CR.96 LLED8200-LPG Walk Over.90 LLED8200-RME LLED8200-LR LLED8200-WMR LLED8200-RCR CORNER MOUNT LLED8200-CM LLED8200-CMC PENDANT MOUNT LLED8200-HC LLED8200-RPM LLED8200-OL Closet Rod LLED8200-RC calilighting.com California Accent Lighting, Inc. lipleds LLED8200 5

6 LLED W 4W 6W MOUNTING CLIP (DRY) #LLED8200-MC MOUNTING CLIP (DRY) #LLED8200-UC MOUNTING CLIP (WET) #LLED8200-MC-WET MOUNTING CLIP (WET) #LLED8200-MC-WET-6W LLED8200-UC No Lens 0.55 LLED8200-SR Specify Length X X = Custom Length LLED8200-L #LLED8200-XX-MC #LLED8200-XX-MC #LLED8200-XX-MC #LLED8200-XX-MC-3 (Adjustable) #LLED8200-XX-MC-4-X (Specify Length Maximum 2').73 LLED8200-WMC LLED8200-ST LLED8200-ST 6W 2W, 4W #LLED8200-XXXX-MC #LLED8200-ST-uc #LLED8200-ST-MC-1 (Mounting Channel) RECESS MOUNT Mounting Options LLED8200-UCS LLED8200-CR LLED8200-LPG Embedded Channel LLED8200-RME LLED8200-WMR.70 Glass (thickness 3/16" ~ 1/4").96 Concrete or Wood Floor.26 Glass Mount Dropped Ceiling Toe Kick Recessed Channel LLED8200-LR 1.19 #LLED8200-SPR-MC LLED8200-RCR lipleds LLED #LLED8200-RCR-MC #LLED8200-RCR-MC-H California Accent Lighting, Inc CALI ACCESSORIES SURFACE MOUNT Mounting Options

7 CORNER MOUNT Mounting Options LLED8200-CM Specify Length X X = Custom Length ACCESSORIES.69 #LLED8200-CM-MC-1.90 #LLED8200-CM-MC-2 1 #LLED8200-CM-MC-3 (Adjustable).90 #LLED8200-CM-MC-4-X (Specify Length Maximum 2').98 LLED8200-CMC.56 Specify Length X=Length #LLED8200-CMC-MC-1 #LLED8200-CMC-MC-2 1 #LLED8200-CMC-MC-3 (Adjustable).96 #LLED8200-CMC-MC-4-X (Specify Length Maximum 2') PENDANT MOUNT Mounting Options.25 LLED8200-HC LLED8200-OL #LLED8200-XX-MC-H LLED8200-RPM Closet Rod mounting Bracket #LLED8200-MB LLED8200-RC #LLED8200-RC-MC #LLED8200-RC-MC-H POWER CONNECTORS - SINGLE ROW CONTINUOUS CONNECTORS - SINGLE ROW Power Connector (#LLED8200-PC) 3 Continuous Connector (#LLED8200-CC) Power Connector White Jacket (#LLED8200-PC-w) Continuous Connector White Jacket (#LLED8200-CC-W) Power Connector Black Jacket (#LLED8200-PC-B) calilighting.com California Accent Lighting, Inc. Continuous Connector Black Jacket (#LLED8200-CC-B) lipleds LLED8200 7

8 transformer Electronic: 0-10V Dimming Transformer (Indoor or Outdoor Rated) Product Code Max. Watts Input Output Input AC Current Power Factor Width (W) Height (H) Depth (D) TRA16-E TRA16-E-UNV-24VDC-10V V-277V 24VDC.2A / 277VAC or.4a / 120VAC TRA25-E TRA25-E-UNV-24VDC-10V V-277V 24VDC.2A / 277VAC or.4a / 120VAC TRA40-E TRA40-E-UNV-24VDC-10V V-277V 24VDC.25A / 277VAC or.6a / 120VAC TRA60-E TRA60-E-UNV-24VDC-10V V-277V 24VDC.3A / 277VAC or.64a / 120VAC TRA80-E TRA80-E-UNV-24VDC-10V V-277V 24VDC.4A / 277VAC or.85a / 120VAC TRA90-E TRA90-E-UNV-24VDC-10V V-277V 24VDC.4A / 277VA or.85a / 120VAC TRA100-E TRA100-E-UNV-24VDC-10V V-277V 24VDC.5A / 277VAC or 1.2A / 120VAC TRA120-E TRA120-E-UNV-24VDC-10V V-277V 24VDC.55A / 277VAC or 1.4A / 120VAC TRA150-E TRA150-E-UNV-24VDC-10V V-277V 24VDC.7A / 277VAC or 1.7A / 120VAC TRA185-E TRA185-E-UNV-24VDC-10V V-277V 24VDC.8A / 277VAC or 2.1A / 120VAC TRA240-E TRA240-E-UNV-24VDC-10V V-277V 24VDC 2A / 277VAC or 4A / 120VAC TRA320-E TRA320-E-UNV-24VDC-10V V-277V 24VDC 1.45A / 277VAC or 3.5A / 120VAC ** Class II 24VDC TRA16-E, TRA25-E, TRA40-E, TRA60-E, TRA-80E, TRA90-E Dimming Protocol (0-10V) TRA-E Compatible Dimmers Technical Requirements For Control Equipment (0-10V Protocol) The output current level of the dimmable driver is controlled by DC voltage (0-10V) applied to the control terminals (blue and white). The light output of LEDs is controlled by the amount of output current from the dimmable driver. The control device must be capable of sinking a DC current flow from the driver. The maximum amount under any condition is 500 microamps (ua) per driver. The control terminals of the dimmable driver are isolated from the power lines and are suitable for use as Class 2 wiring. Multiple drivers are desired for use with same control device, the control terminals may be connected in parallel in a bus configuration. Since the control bus is Class 2 wiring, all control devices that are connected to the power line must have proper isolation between the power line and the control terminals/bus. The control device, which intends to control more than one dimmable driver, must be capable of sinking the total current supplied to control bus by the drivers. If the control terminals/bus is shorted in any case, the current on the control terminals/bus will be 500 microamps (ua) per driver maximum. If the control terminals are opened, the voltage on the control terminals will then be 10V ± 0.5 volt. As a result, dimmable driver supplies maximum output current to LEDs under this condition. The driver is intended for use with control voltages between 0 and 10 VDC. The control equipment must not impose a voltage greater than 11 V peak maximum on the driver control terminals. 120V-277V TRAXXX-E-UNV-24VDC-10V Brown (Hot) Blue (Neutral) Transformer enclosure Red (+) Black (-) TRAXXX-E-UNV-24VDC-10V 24VDC to Lighting White (-) Blue (+) Dimmer (Supplied by others) 0-10V Line 8 lipleds LLED8200 California Accent Lighting, Inc CALI

9 transformer Magnetic: Forward Phase Dimming Transformer (Indoor or Outdoor Rated NEMA 3R) - Primary Fusing Included Product Code Max. Watts Input Output Input Current No Load-Full Load Power Factor Width (W) Height (H) Depth (D) TRA5 TRA5-120V-24VDC 5 120V 24VDC Amps TRA5-277V-24VDC 5 277V 24VDC Amps TRA10 TRA10-120V-24VDC V 24VDC Amps TRA10-277V-24VDC V 24VDC Amps TRA20 TRA20-120V-24VDC V 24VDC Amps TRA20-277V-24VDC V 24VDC Amps TRA35 TRA35-120V-24VDC V 24VDC Amps TRA35-277V-24VDC V 24VDC Amps TRA40 TRA40-120V-24VDC V 24VDC Amps TRA40-277V-24VDC V 24VDC Amps TRA50 TRA50-120V-24VDC V 24VDC Amps TRA50-277V-24VDC V 24VDC Amps TRA60 TRA60-120V-24VDC V 24VDC Amps TRA60-277V-24VDC V 24VDC Amps TRA75 TRA75-120V-24VDC V 24VDC Amps TRA75-277V-24VDC V 24VDC Amps TRA90 TRA90-120V-24VDC V 24VDC Amps TRA90-277V-24VDC V 24VDC Amps TRA100 TRA V-24VDC V 24VDC Amps TRA V-24VDC V 24VDC Amps TRA150 TRA V-24VDC V 24VDC Amps TRA V-24VDC V 24VDC Amps TRA200 TRA V-24VDC V 24VDC Amps TRA V-24VDC V 24VDC Amps TRA250 TRA V-24VDC V 24VDC Amps TRA V-24VDC V 24VDC Amps TRA300 TRA V-24VDC V 24VDC Amps TRA V-24VDC V 24VDC Amps * Class II 24VDC TRA5, TRA10, TRA20, TRA35, TRA40, TRA50, TRA60, TRA75, TRA90 Dimming Protocol (Forward Phase Dimming) TRA Compatible Dimmers Technical Requirements For Control Equipment Magnetic Low Voltage (MLV) - Magnetic (core and coil, toroidal) transformer-supplied low voltage lighting Electrical Characteristics - Inductive Special Requirements - Symmetric cycles (VDC 2), smooth turn off (positive and negative periods are equal for safe MLV transformer operation) TRAXXX-120V-24VDC TRAXXX-277V-24VDC Transformer enclosure Transformer enclosure Red (+) Red (+) Blue (-) Green (Ground) Blue (-) Green (Ground) 24VDC to Lighting 24VDC to Lighting Optional Dimmer (not included) Optional Dimmer (not included) White (Neutral) White (Neutral) Black Dimmed (Hot) Orange (277V) Primary Voltage Line Primary Voltage 277VAC Line 120VAC calilighting.com California Accent Lighting, Inc. Forward Phase Dimming Forward Phase Dimming lipleds LLED8200 9

10 transformer Lutron: Hi-Lume A Series Lutron: Hi-Lume 1% Transformer (Indoor) Product Code Max. Watts Input Output Input Current No Load-Full Load Power Factor Width (W) Height (H) Depth (D) TRA40-E-1%-2 TRA40-E-UNV-24VDC-FP-1%-2WIRE V-277V 24VDC 0.37A / 120VAC or 0.17 / 277 VAC 0.9 4" 2.62" 4" TRA40-E-1%-3 TRA40-E-UNV-24VDC-FP-1%-3WIRE V-277V 24VDC 0.37A / 120VAC or 0.17 / 277 VAC 0.9 4" 2.62" 4" DIMMING PROTOCOL (2 Wire - 40 Watt Max Hi-Lume A Series Lutron #LTEA4U1UKL-CV240) Compatible with Energi Savr Node unit with EcoSystem, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem, and Quantum systems, allowing for integration into a planned or existing EcoSystem lighting control solution. Meets ANSI C62.41 category A surge protection standards up to and including 4 kv. FCC Part 15 compliant for commercial applications at 120 V~ or 277 V~ Dimming Range: 100% to 1%. Operating Voltage: V~ at 50/60 Hz. Lifetime: 50,000 tc = 149 F (65 C)1 for 40 W drivers. For rated warranty, tc not to exceed the maximum rated temperatures listed here. Patented thermal foldback protection. LEDs turn on to any dimmed level without going to full brightness. Non-volatile memory restores all driver settings after power failure. Power Factor: > 0.90 for loads greater than 25 W Standby Power Consumption: < 1.0 W Total Harmonic Distortion (THD): < 20% for loads greater than 25 W. Inrush Current: < 2 A. Inrush Current Limiting Circuitry: eliminates circuit breaker tripping, switch arcing and relay failure. Open circuit protected. Short circuit protected. Turn-on time: 1.5 seconds.2 PWM Dimming Frequency: 550 Hz. DIMMING PROTOCOL (3 Wire - 40 Watt Max Hi-Lume 1% Lutron #L3DA4U1UKL-CV240 Compatible with Energi Savr Node unit with EcoSystem, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem, and Quantum systems, allowing for integration into a planned or existing EcoSystem lighting control solution. Meets ANSI C62.41 category A surge protection standards up to and including 4 kv. FCC Part 15 compliant for commercial applications at 120 V~ or 277 V~ Dimming Range: 100% to 1%. Operating Voltage: V~ at 50/60 Hz. Lifetime: 50,000 tc = 149 F (65 C)1 for 40 W drivers. For rated warranty, tc not to exceed the maximum rated temperatures listed here. Patented thermal foldback protection. LEDs turn on to any dimmed level without going to full brightness. Non-volatile memory restores all driver settings after power failure. Power Factor: > 0.90 for loads greater than 25 W Standby Power Consumption: < 1.0 W Total Harmonic Distortion (THD): < 20% for loads greater than 25 W. Inrush Current: < 2 A. Case type KL Inrush Current Limiting Circuitry: eliminates circuit breaker tripping, switch arcing and relay failure. Open circuit protected. Short circuit protected. Turn-on time: 1.5 seconds.2 PWM Dimming Frequency: 550 Hz. 10 lipleds LLED8200 California Accent Lighting, Inc CALI

11 Design Guidelines Option A - Straight Runs Detail A Power Connector (#LLED8200-PC) 33" 1.5" Option B - Rectangular Runs Detail A Detail A Power Connector (#LLED8200-PC) 33" 1.5" 33" 1.5" Power Connector (#LLED8200-PC) 36" total length Detail B Detail B Continuous Connector (LLED8200-CC) 3" Continuous Connector (#LLED8200-CC) Option C - Runs with Custom Continuous Connector XX" Length Detail B Continuous Connector (#LLED8200-CC-XX) (XX - Specify Length) Option D - Curvable Runs Circular Runs Semi-Circular Runs Curved Runs 10" Minimum Radius 10" Minimum Radius calilighting.com California Accent Lighting, Inc. lipleds LLED

12 APPLICATIONS Accent Lighting LLED8200-UC LLED8200-CM LLED8200-L Cove Lighting Field Curveable Lighting LLED8200 LLED8200 LLED8200 LLED8200 Wall Grazing LLED8200-SR-30D LLED8200-SR-15D LLED8200-SR-45D LLED8200-SR-60D Mirror Lighting LLED8200-STF LLED8200-L-F LLED8200-SR-F LLED8200-OL-F Direct View Lighting Recessed to wall LLED8200-RCR-F Recess to Ceiling LLED8200-RCR-F Closet Mount LLED8200-RPM Pendant Mount LLED8200-RC-F 12 lipleds LLED8200 California Accent Lighting, Inc CALI

13 APPLICATIONS Accent Lighting Back Lighting LLED8200-UC LLED8200-UC LLED8200-UC Panel Lighting Side View Front View Cornice Lighting LLED8200-L Toe Kick Lighting LLED8200-ST-F Underbench Lighting LLED8200-SR Step Lighting LLED8200-ST-F Undercounter Lighting LLED8200-CMC-F LLED8200-SR-F LLED8200-CMC-F Bartop Lighting LLED8200-ST Back Bartop Lighting LLED8200-SR-F calilighting.com California Accent Lighting, Inc. lipleds LLED

14 Irvine Spectrum, Irvine, CA. Designed by LPA, Inc. California Accent Lighting, Inc E. Lincoln Ave. #431, Anaheim, CA ph CALI or fx calilighting.com CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice. MADE IN USA 14 lipleds LLED8200 California Accent Lighting, Inc CALI