10 White 13 Statuary Bronze 21 Black 28 Metalized Grey RAL Custom Color (specify RAL #) F Frosted S Solite (provided standard) RETROFIT

Transcription

1 Beve RETROFIT PROJECT INFORMATION PROJECT DATE TYPE 1" Regress Beve Retrofit Recessed Adjustable with Warm Glow Dimming - provides maximum delivered lumens and optical performance through the optimization of thermal, optical and science without compromising existing construction, while Warm Glow dimming gradually transitions from 2700K, 3000K or 3500K down to 2200K as you dim - creating intimacy and enhancing the mood of the space. DELIVERED PERFORMANCE 1" Regress 1" Regress Dimmed Color Analysis Dimmed Color Full on Dimmed to Dimmed to Dimmed to Analysis 100% 50% 20% 1% Warm Glow Dimming 2700K 2600K 2450K 2200K Incandescent 100W A K 2600K 2400K 2000K 32W Warm Glow Dimming Adjustable Performance Summary Beve Full on Dimmed to Dimmed to Dimmed to 100% 50% 20% 1% Warm Glow Dimming TM 16W 32W 16W 32W 16W 32W 16W 32W Source Lumens Delivered Lumens Wattage Delivered Lumens Per Watt Source Lumens Per Watt Performance based on 3000K Bevel Finish Color area (B1) Retrofit Flange Finish (10, 13, 21, 28, RAL) 3 1 2" Ø 4 1 2" Ø " Ø s Warm Glow Dimming Curves vs. 's Warm Glow Dimming Curves Actual Incandescent Dimming Curve 100% 90% 80% 70% 2700K 3000K 3500K Incandescent 60% 50% 40% 30% 20% 10% % % LIGHT OUTPUT HOW TO SPECIFY Ordering Example: Specify trim code and housing code to order: Example : - B1- S LRTA WGD1-2722KS RT10-120V - DIML4 0% CORRELATED COLOR TEMPERATURE (KELVIN) TRIM ORDERING INFORMATION TRIM OPTION BEVEL STYLE B1 LENS BEVEL FINISH Round Retrofit Adjustable 1" Regress w/ Warm Glow Dimming LRTA4 W Wet Location HOUSING ORDERING INFORMATION RETROFIT HOUSING CODE WATTAGE ENGINE CODE COLOR REFLECTOR* FLANGE FINISH VOLTAGE LRTA4 WGD1 RT W, 725 lumens W, 1225 lumens WGD1 B1 1" Regress Bevel, Die Cast 2722KS K-2200K, 80+ CRI 3022KS K-2200K, 80+ CRI 3522KS 3500K-2200K, 80+ CRI 2 Step MacAdam ellipse is standard for all F Frosted S Solite (provided standard) beam beam * Note: For other beam options, see Accessories 10 White 13 Statuary Bronze 21 Black 28 Metalized Grey RAL Custom Color (specify RAL #) 10 White 13 Statuary Bronze 21 Black 28 Metalized Grey RAL Custom Color (specify RAL #) 120V 277V DIMMING OPTIONS DIML2 0-10V dim, 15% (provided standard) DIML4 Lutron Hi-Lume 1% 3-wire/ECO DIML6A ELDO 0-10V 0.1%, logarithmic DIML6B ELDO 0-10V 0.1%, linear DIML7 ELDO DALI 0.1% OPTICAL ACCESSORIES (Order separately) AL10E Refer to optical AL15E accessories AL30E matrix on next page for AS61E resulting AL20F beamspreads AL30F when AL40F accessory lens is AL55F combined AL80F with 10 and AS61F 30 optics Clearly specify quantity in your order 2014., LLC.

2 Beve RETROFIT TRIM INFORMATION 3 1 2" Ø 4 1 2" Ø " Ø 1" Regress Bevel Finish Color area Flange Finish Color area (10, 13, 21, 28 RAL) HOUSING INFORMATION 10 HOUSING 30 HOUSING Beve Optical Accessories Matrix if you want and you have beam AL10E N/A 20 beam AL15E N/A 25 beam AL30E N/A 35 beam N/A AL20F 40 beam N/A AL30F 45 beam N/A AL40F 55 beam N/A AL55F 60 beam N/A AL80F 20x60 beam AS61E N/A 40x60 beam N/A AS61F size E size F " " 5 1 8" 5 1 8" 5 1 4" " 17" 17" Adjustable trim requires minimum of 5-1/4" radius clearance for full functional range. Driver and j-box remain in a fixed position " 8 1 8" 1 Max. Ceiling Thickness 1 Max. Ceiling Thickness " " SPECIFICATIONS TRIM: 4-1/2" round aperture with a 1" regressed bevel, THERMAL MANAGEMENT: Proprietary high performance retained by three ball plungers. Die cast aluminum bevel aluminum die cast heatsink for maximum life. Ambient is available in white, statuary bronze, black, and metalized temperatures at fixture location should not exceed 40 C grey finishes. Custom color flanges available (provide RAL#). during normal operation. TRIM LENS: Trim is shipped with integral solite lens standard; frosted lens available as an option. REFLECTOR: Interchangeable precision injection molded specular polycarbonate reflector optimized for 10 or 30 beam distribution. Note: 10 optic requires dedicated 10 light engine. ADJUSTMENT: True hot aiming with center beam optics is adjustable, with a completely tool-less mechanism lockable vertical tilt with 362 lockable rotation. FIELD REPLACEABLE LIGHT ENGINE: Available in 2 lumen packages: 16W (725 lm) or 32W (1225 lm). Engine is field replaceable through the aperture without tools. COLOR: Beve with Warm Glow dimming is available in 3 color temperatures with Warm Glow dimming. All color options gradually warm to 2200K as you dim and are tightly binned for fixture-to-fixture color consistency within a 2-Step MacAdam Ellipse. 80+ color rendering index provided standard. RATED LIFE: Based on IESNA LM ,000 hours at 70% lumen maintenance (L70). FIELD REPLACEABLE : 0-10V, 10% DIML2 dimming driver (with a high power factor) provided standard and sources 2mA. Specify 120V or 277V. Driver complies with IEEE C62.41 surge protection. DIMMING OPTIONS: Multiple dimming drivers available. See compatibility chart attached. Note: DIML6A logarithmic control is intended for use with Lutron control systems; DIML6B linear control is intended for use with non-lutron controls. DIML6 dimming drivers source 2mA. EMERGENCY: No emergency options available. MOUNTING: Installs from below. Fixture is held in place with (2) leaf springs attached to flanged die cast aluminum mounting collar, powder-coated with finish color of choice (specify color). If no color is selected, white will be provided. HOUSING: Flanged die cast aluminum mounting collar is attached to die cast aluminum heatsink with 20 gauge black powder-coated steel sleeve. 16 gauge galvanized steel junction box contains driver and has (2) 7/8 knock outs. ACCESSORY HOLDER: Snap in accessory holder shipped with fixture. 10 accepts E size lens, maximum accepts F size lens, maximum 2. CEILING CUT OUT: 5-1/2 Ø MAXIMUM CEILING THICKNESS: As per drawing above. LISTINGS: Dry/Damp. Wet location option available with B1 trim only. NRTL/CSAUS tested to UL standards. IBEW union made. WARRANTY: 5 years NOTES: Not for use in corrosive environment. Use of pressure washer voids warranty. Not for use with acoustical ceiling tiles. PHOTOMETRICS: Consult factory or website for IES files. Tested in accordance with IESNA LM , LLC.

3 Beve RETROFIT DELIVERED PERFORMANCE 16W 2722KS 10 16W 3022KS , LLC.

4 Beve RETROFIT DELIVERED PERFORMANCE 32W 2722KS 10 32W 3022KS , LLC.

5 Beve RETROFIT DELIVERED PERFORMANCE 16W 2722KS 30 16W 3022KS , LLC.

6 Beve RETROFIT DELIVERED PERFORMANCE 32W 2722KS 30 32W 3022KS , LLC.

7 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY SELECTION GUIDE D2 / DIML2 NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D2 / DIML2 : 0-10V Dimming Driver Wiring (Dims down to 10%) D2 / DIML2 Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V / 277V Use source current per Crestron ilux dimmer expansion module CLS-EXP-DIMFLV 100% - 10% fixture specification Crestron DIN Rail dimmer DIN-4DIMFLV4 100% - 10% sheet to determine Crestron DIN Rail analog output module DIN-A08 100% - 10% number of fixtures per Crestron 8 Channel dimmer module GLX-DIMFLV8 100% - 10% dimmer. Max number Crestron 8 Channel dimmer module GLXP-DIMFLV8 100% - 10% of fixtures is limited by Leviton IllumaTech dimmer IP710-DLX 100% - 10% dimmer load rating. Lightolier (Philips) Vega V2000FAMU 100% - 10% Lutron Diva DVTV-XX 100% - 10% * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIMMER: 0-10V D2 / DIML2 0-10V DIMMING W/RELAY TO SWITCH POWER 0-10V (-) 0-10V (+) SWITCHED HOT GRAY NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. CLASS 2 CONTROL WIRES RELAY DIMMER: 0-10V w/ POWER SWITCHING D2 / DIML2 0-10V DIMMING (NO RELAY) 0-10V (-) 0-10V (+) SWITCHED HOT GRAY NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. GROUND 2016., LLC. I Revised 03/22/2017

8 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY SELECTION GUIDE D4 / DIML4 NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D4 / DIML4 : Lutron Hi-Lume A-Series Driver with 3-Wire FL Control / Dimming Driver Wiring (Dims down to 1%) D4 / DIML4 3-Wire Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V Only 39W and Less 40W - 80W ETC Sensor+ Cabinet D20 Dimming module 100% - 1% ETC Unison DRd Cabinet D20F Dimming module 100% - 1% Lutron Nova T NTF % 1% Lutron Nova T NTF-103P- 100% 1% Lutron Nova NF % 1% Lutron Nova NF-103P- 100% 1% Lutron Vareo VF % 1% Lutron Skylark SF-10P-, SF-103P- 100% 1% Lutron Diva DVF-103P-, DVSCF-103P- 100% 1% Lutron Ariadni AYF-103P- 100% 1% Lutron Vierti VTF-6A- 100% 1% Lutron Maestro MAF-6AM-, MSCF-6AM- 100% 1% Lutron Maestro Wireless MRF2-F6AN-DV- 100% 1% Lutron RadioRA 2 RRD-F6AN-DV- 100% 1% Lutron HomeWorks QS HQRD-F6AN-DV 100% 1% Lutron Interfaces PHPM-3F-120, PHPM-3F-DV 100% 1% Lutron GP Dimming Panels Various 100% 1% V Only 40W and Less 41W - 80W ETC Sensor+ Cabinet D20 Dimming module 100% - 1% ETC Unison DRd Cabinet D20F Dimming module 100% - 1% Lutron Nova T NTF % 1% Lutron Nova T NTF-103P % 1% Lutron Nova NF % 1% Lutron Nova NF-103P % 1% Lutron Skylark SF-12P-277-, SF-12P % 1% Lutron Diva DVF-103P-277-, DVSCF-103P % 1% Lutron Ariadni AYF-103P % 1% Lutron Vierti VTF-6A- 100% 1% Lutron Maestro MAF-6AM-277-, MSCF-6AM % 1% Lutron Maestro Wireless MRF2-F6AN-DV- 100% 1% Lutron RadioRA 2 RRD-F6AN-DV- 100% 1% Lutron HomeWorks QS HQRD-F6AN-DV 100% 1% Lutron Interfaces PHPM-3F-DV 100% 1% Lutron GP Dimming Panels Various 100% 1% * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIML4 wiring diagrams continued on next page 2016., LLC. I Revised 03/22/2017

9 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY SELECTION GUIDE D4 / DIML4 Continued NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D4 / DIML4 : Lutron Hi-Lume A-Series Driver with 3-Wire FL Control / Dimming Driver Wiring (Dims down to 1%) GROUND DIMMER: 3 WIRE PHASE DIMMED HOT SWITCHED HOT D4 / DIML4 3 WIRE PHASE DIMMING CAP UNUSED ECOSYS WIRES GRAY ORANGE D4 / DIML4 : Lutron Hi-Lume A-Series Driver with EcoSystem Control / Dimming Driver Wiring (Dims down to D4 / DIML4 EcoSystem Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V / 277V 39W and Less 40W - 80W Lutron PowPak dimming module RMJ-ECO32-DV-B 100% 1% Lutron Energi Savr Node QSN-1ECO-S, QSN-2ECO-S 100% 1% Lutron GRAFIK Eye QS (120V ONLY) QSGRJ-_E, QSGR-_E 100% 1% Lutron Quantum Various 100% 1% * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. E2 E1 D4 / DIML4 EcoSystem CONTROLS ECOSYS BUS E2 E1 WALL CONTROL CAP UN-USED ORANGE WIRE GRAY ORANGE 2016., LLC. I Revised 03/22/2017

10 IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIMMING COMPATIBILITY SELECTION GUIDE D6A / DIML6A and D6E / DIML6E D6B / DIML6B and D6F / DIML6F D6A / DIML6A and D6E / DIML6E Dimming Compatibility Table D6A / DIML6A and D6E / DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below) D6A / DIML6A = Eldo SOLOdrive 0-10V control dims from 100% to 0.1% D6E / DIML6E = Eldo ECOdrive 0-10V control dims from 100% to 1% D6A / DIML6A and D6E / DIML6E Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6A 6E Refer to manufacturer's Lutron Diva DVTV/NFTV with PP-20 99% - 0.1% 1% dimmer load rating for Lutron Nova T NTFTV with PP-20 99% - 0.1% 1% maximum and minimum Lutron Energi Savr Node QSN-4T16-S 100% - 0.1% 1% fixture quantities per Lutron GP Dimming Panels TVM2 Module 99% - 0.1% 1% dimmer. Lutron Interfaces GRX-TVI w/ GRX % - 0.1% 1% Enlighted compatible. Sensor Switch nio nio EZ 100% - 0.1% 1% enlighted Control Unit CU-3E-1R 100% - 0.1% 1% D6B / DIML6B and D6F / DIML6F Dimming Compatibility Table D6B / DIML6B and D6F / DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-lutron and others listed below) D6B / DIML6B = Eldo SOLOdrive 0-10V control dims from 100% to 0.1% D6F / DIML6F = Eldo ECOdrive 0-10V control dims from 100% to 1% D6B / DIML6B and D6F / DIML6F Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6B 6F Bush-Jaeger Electronic potentiometer 2112U % - 0.1% 1% Jung Electronic potentiometer % - 0.1% 1% Leviton Iluma Tech dimmer IP710-DLX 100% - 0.1% 1% Lightolier (Philips) Momentum (120V ONLY) ZP600FAM % - 0.1% 1% Merten Electronic potentiometer % - 0.1% 1% Pass & Seymour Titan CD4FB-W 100% - 0.1% 1% Watt Stopper Miro DCLV1 100% - 0.1% 1% Synergy Wallbox Dimmers ISD BC 100% - 0.1% 1% ABB i-bus SD/S % - 0.1% 1% Crestron Modules GLX-DIMFLV8, GLXP-DIMFLV8 100% - 0.1% 1% Crestron Green Light GLPAC-DIMFLV4-, GLPAC-DIMFLV8-100% - 0.1% 1% Crestron Green Light Power Pack GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM, GLPP-1DIMFLV3EX-PM 100% - 0.1% 1% Crestron DIN Rail Analog Output Module DIN-A08 100% - 0.1% 1% Crestron DIN Rail 0-10V Fluorescent Dimmer DIN-4DIMFLV4 100% - 0.1% 1% Crestron ilux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV 100% - 0.1% 1% enlighted Control Unit CU-3E-1R 100% - 0.1% 1% Refer to manufacturer's dimmer load rating for maximum and minimum fixture quantities per dimmer. Enlighted compatible. DIMMING WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D6 / DIML6 D6 / DIML6 0-10V DIMMING W/RELAY TO SWITCH POWER 0-10V DIMMING (NO RELAY) CLASS 2 CONTROL WIRES DIMMER: 0-10V RELAY 0-10V (-) 0-10V (+) SWITCHED HOT GRAY GROUND DIMMER: 0-10V w/ POWER SWITCHING 0-10V (-) 0-10V (+) SWITCHED HOT GRAY DIMMER: 0-10V w/ POWER SWITCHING DIML6A, 6B 0-10V DIMMING (NO RELAY) 2016., LLC. I Revised 08/14/2017

11 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY SELECTION GUIDE D7 / DIML7 and D7E NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D7 / DIML7 and D7E Dimming Driver Wiring D7 / DIML7 and D7E are linearly programmed dimming drivers. D7 / DIML7 = Eldo SOLOdrive DALI control dims from 100% to 0.1% D7E = Eldo ECOdrive DALI control dims from 100% to 1% D7 / DIML7 / D7E DALI CONTROLS DALI BUS DA DA WALL CONTROL ORANGE (-) ORANGE/ (+) 2016., LLC. I Revised 08/14/2017