Power Supplies. Overview

Transcription

1 Power Supplies Overview Access control provides enhanced security, audit trails, and custom credentials. The power supply is necessary to make the entire system operational. Power supplies offer accurate and reliable power for all types of access control. In selecting a power supply, you must assess the application. Linear power supplies offer low noise across frequencies, making them ideal for sensitive electronics. However, they tend to be physically heavier and less efficient. Switching power supplies are physically lighter, and are more energy-efficient and cost effective. Unless the application specifically necessitates a linear power supply, a switching power supply is an excellent option. A variety of power transfers and electrified hinges are available to assist in the secure transfer of power and data from the frame to electrified hardware on the door. an ASSA ABLOY Group company. All rights reserved. 215

2 Products Available 1 SECURITRON BPS 12/24-1 Dual-Voltage Linear 2 SECURITRON BPS Linear 3 SECURITRON AQD3 Dual-Voltage Switching 4 SECURITRON AQD5 Dual-Voltage Switching 5 SECURITRON AQD6 Dual-Voltage Switching 6 SECURITRON EcoPower 7 SECURITRON AQM20 Multi-Voltage Switching Note: For selection of PoE power supplies, please see the Power over Ethernet section beginning on page an ASSA ABLOY Group company. All rights reserved.

3 SECURITRON BPS 12/24-1 Dual-Voltage Linear Power Supply Overview The BPS Series of power supplies delivers linear technology recommended by most manufacturers of sensitive electronic access control and security components. Safe for use with readers, electric strikes, and maglocks, these units interface to fire alarm systems and provide battery backup. Features and Benefits Dual output, field-selectable 12 or 24VDC via clearly marked toggle switch Supplies 1 full amp continuous current output, even while charging backup batteries Linear regulated power supply provides the cleanest power available UL Class 2 power-limited output SPDT AC monitoring output allows for remote monitoring of the power supply s 110VAC input External LED indicator (AC and DC) easily determines power status UL listed, low-current fire alarm disconnect requires only a minimum size fire alarm relay and wire gauge Poly switch 2A breaker allows for large, short duration inrush current if batteries are installed (approx. 20A for 1 second) Line voltage and DC fuses Sealed lead acid or gel battery charging capability (battery sold separately) MagnaCare lifetime replacement, no-fault warranty an ASSA ABLOY Group company. All rights reserved. 217

4 ELECTROMECHANICAL Electronic Specifications Input Voltage Output Voltage Indicators Operating Temperature 120VAC 1A at 12 or 24VDC, field-selectable with toggle switch External LED indicators for AC and DC 32 to 105 F (0 to 40 C) Certifications UL Class 2; UL 294; ULC Securitron BPS 12/24-1 Dual-Voltage Linear Power Supply How to Order Model BPS-12/24-1 Description Dual Voltage Power Supply 12/24VDC, 1A Dimensions 12" (305 mm) 4" (102 mm) 9" (229 mm) 218 an ASSA ABLOY Group company. All rights reserved.

5 SECURITRON BPS Linear Power Supply Overview The BPS Series single-voltage power supplies deliver linear technology recommended by most manufacturers of sensitive electronic access control and security components. Safe for use with readers, electric strikes, and maglocks, these units interface to fire alarm systems and provide battery backup. The BPS power supplies provide 12VDC or 24VDC output with a variety of amp sizes that support small or large power needs. Features and Benefits 1, 4 or 8 outputs protected with poly switch (PTC) 2A circuit breakers LEDs provide an easy-to-read voltage indicator for output zone status (voltage, no voltage) Slide switches connect or disconnect load from power (excludes 1A) Battery charging and backup capability (battery sold separately) Rugged steel enclosure Fire alarm relay connection for release of all devices upon fire alarm activation Clean linear power for flawless operation with all sensitive active electronic components MagnaCare lifetime replacement, no-fault warranty an ASSA ABLOY Group company. All rights reserved. 219

6 ELECTROMECHANICAL Electronic Specifications Input Voltage Output Voltage Indicators Operating Temperature Certifications 120VAC Various depending on model LED voltage indicators 32 to 105 F (0 to 40 C) ANSI/UL 294 listed; MEA City of New York; CSA-C22.2 No. 205 listed Securitron BPS Linear Power Supply How to Order Model Description Capacity Cabinet Size Outputs BPS-12-1 BPS-12-3 BPS BPS-12-6 BPS-12-9 BPS BPS-24-1 BPS-24-2 BPS-24-3 BPS-24-4 BPS-24-6 BPS Power Supply 12VDC, 1A Power Supply 12VDC, 3A Power Supply 12VDC, 4.5A Power Supply 12VDC, 6A Power Supply 12VDC, 9A Power Supply 12VDC, 15A Power Supply 24VDC, 1A Power Supply 24VDC, 2A Power Supply 24VDC, 3A Power Supply 24VDC, 4A Power Supply 24VDC, 6A Power Supply 24VDC, 10A 1A 3A 4.5A 6A 9A 15A 1A 2A 3A 4A 6A 10A 12" x 9" x 4" 14" x 14" x 4" 14" x 14" x 4" 15" x 18" x 6" 15" x 18" x 6" 15" x 18" x 6" 12" x 9" x 4" 14" x 14" x 4" 14" x 14" x 4" 15" x 18" x 6" 15" x 18" x 6" 15" x 18" x 6" an ASSA ABLOY Group company. All rights reserved.

7 BPS Linear Power Supply Selection Guide Overview Please use the chart on the next page to assist you in selecting the proper BPS Linear Power Supply. an ASSA ABLOY Group company. All rights reserved. 221

8 ELECTROMECHANICAL BPS Linear Power Supply Selection Guide Product Number Input Voltage Connection to AC power is hard wired. Output Voltage Output Current Battery Charger UL Lister # of Outputs AC Loss and Low Battery Status BPS-12/ VAC 12/24 VDC 1A Y Y 1 AC LOSS ONLY W/FAR Manual Reset Option BPS VAC 12 VDC 1A Y Y 1 _ W/FAR-12 BPS VAC 12 VDC 3A Y Y 4 W/PSM-12 W/FAR-12 BPS VAC 12 VDC 4.5A Y Y 4 W/PSM-12 W/FAR-12 BPS VAC 12 VDC 6A Y Y 8 W/PSM-12 W/FAR-12 BPS VAC 12 VDC 9A Y Y 8 W/PSM-12 W/FAR-12 BPS VAC 12 VDC 15A Y Y 8 W/PSM-12 W/FAR-12 BPS VAC 24 VDC 1A Y Y 1 _ W/FAR-24 BPS VAC 24 VDC 2A Y Y 4 W/PSM-24 W/FAR-24 BPS VAC 24 VDC 3A Y Y 4 W/PSM-24 W/FAR-24 BPS VAC 24 VDC 4A Y Y 8 W/PSM-24 W/FAR-24 BPS VAC 24 VDC 6A Y Y 8 W/PSM-24 W/FAR-24 BPS VAC 24 VDC 10A Y Y 8 W/PSM-24 W/FAR-24 BPSM VAC 12 VDC 6A Y Y 8 Y W/FAR-12 BPSM VAC 12 VDC 9A Y Y 8 Y W/FAR-12 BPSM VAC 12 VDC 15A Y Y 8 Y W/FAR-12 BPSM VAC 24 VDC 4A Y Y 8 Y W/FAR-24 BPSM VAC 24 VDC 6A Y Y 8 Y W/FAR-24 BPSM VAC 24 VDC 10A Y Y 8 Y W/FAR an ASSA ABLOY Group company. All rights reserved.

9 SECURITRON AQD3 Dual-Voltage Switching Power Supply Overview The Securitron AccuPower AQD3 Series of switching power supplies are dual-voltage, supervised units with a battery charger. These field-selectable units have a fast battery charge reserve. They provide a maximum 3A at 12VDC or 1.5A at 24VDC, with up to eight (8) independently controlled, power limited outputs. Features and Benefits Rated up to 2.8A/1.4A continuous output Dual-voltage 12VDC/24VDC field-selectable Internal transformer Tolerates brownout or over-voltage input from VAC Thermal shutdown protection comes with auto restart Circuit breaker protects against over-current and reverse-battery faults Includes battery charger and power supervision Low-battery disconnect prevents deep discharge Dedicated voltage enables faster battery charging even under full load MagnaCare lifetime replacement, no-fault warranty an ASSA ABLOY Group company. All rights reserved. 223

10 ELECTROMECHANICAL Electronic Specifications Input Voltage Output Voltage Indicators Operating Temperature Operating Humidity Certifications 120VAC 3A at 12VDC or 1.5A at 24VDC LED voltage indicators -4 to 104 F (-20 to 40 C) 95% RH (non-condensing) ANSI/UL 294 listed; UL603 listed; ULC-S318 listed Securitron AQD3 Dual-Voltage Switching Power Supply How to Order Product Number Output Amps # of Outputs Class 2 Power- Limited Fuse Rating Fuse Type # of Relays Relay Type UL 294 UL 603 ULC S AQD3 3/1.5 1 Y L L L AQD3-1R 3/1.5 1 Y 1 Fire L L L AQD3-4F 3/1.5 4 Y 1A Fuse L L L AQD3-4C 3/1.5 4 Y 0.35A PTC L L L AQD3-8F 3/1.5 8 Y 0.5A Fuse L L L AQD3-8C 3/1.5 8 Y 0.35A PTC L L L AQD3-8C1R 3/1.5 8 Y 1.23A PTC 1 Fire L L L AQD3-8F8R 3/1.5 8 Y 0.5A Fuse 8 Access Control with Fire L L: Listed R: Recognized Dimensions Enclosure: 14" x 9" x 3.5" 224 an ASSA ABLOY Group company. All rights reserved.

11 SECURITRON AQD5 Dual-Voltage Switching Power Supply Overview The Securitron AccuPower AQD5 Series of switching power supplies are dual-voltage supervised units with a battery charger. These units are field-selectable for 5A at 12VDC or 3A at 24VDC, with up to eight (8) independently controlled, power-limited outputs. Features and Benefits Dual-voltage 5A/12VDC or 3A/24VDC field-selectable continuous output Internal transformer included Tolerates brownout or over-voltage input from VAC Thermal shutdown protection with auto restart provided Circuit breaker protects against over-current and reverse-battery faults Battery charger and power supervision Low-battery disconnect prevents deep discharge Dedicated voltage enables faster battery charging even under full load MagnaCare lifetime replacement, no-fault warranty an ASSA ABLOY Group company. All rights reserved. 225

12 ELECTROMECHANICAL Electronic Specifications Input Voltage Output Voltage Indicators Operating Temperature 120VAC 3A at 12VDC or 1.5A at 24VDC LED voltage indicators -4 to 104 F (-20 to 40 C) Operating Humidity 95% RH (non-condensing) Certifications Class 2; ANSI/UL 294 listed; UL603 listed; ULC-S318 listed Securitron AQD5 Dual-Voltage Switching Power Supply How to Order Product Number Output Amps # of Outputs Class 2 Power- Limited Fuse Rating Fuse Type # of Relays Relay Type UL 294 UL 603 ULC S CAN/ULC S533-M87 AQD5 5/3 1 Y L L L L AQD5-1R 5/3 1 Y 1 _ AQD5-4F 5/3 4 Y 2A Fuse L L L L AQD5-4C 5/3 4 Y 1.4A PTC L L L L AQD5-8F 5/3 8 Y 2A Fuse L L L L AQD5-8C 5/3 8 Y 0.72A PTC L L L L AQD5-8C1R 5/3 8 Y 1.23A PTC 1 Fire R _ AQD5-8F8R 5/3 8 Y 0.5A Fuse 8 Access Control with Fire R R R _ L: Listed R: Recognized Dimensions Enclosure: 14" x 9" x 3.5" 226 an ASSA ABLOY Group company. All rights reserved.

13 SECURITRON AQD6 Dual-Voltage Switching Power Supply Overview The Securitron AQD6 Series of switching power supplies are dual-voltage supervised units with a battery charger designed to power magnetic locks, electric strikes, card readers, sensors, access control boards and other devices in access control systems. The AQD6 Series can also be used to power DC cameras and other DC locking equipment. These units provide field-selectable 6A at 12 or 24VDC with up to 16 independently controlled powerlimited outputs. The AQD6 is Securitron s first power supply series that meets UL 294 (6 th Edition) listed. Features and Benefits Dual-voltage 6A at 12 or 24VDC field-selectable continuous output Tolerates brownout or over-voltage input ± 15% of nominal voltage Thermal shutdown protection with auto restart Circuit breaker protects against over-current and reverse-battery faults Dedicated battery charging circuit prevents overvoltage on locking devices Expandable up to 16 outputs; Class 2 power-limited outputs available Available with a single relay fire trigger or individually MagnaCare lifetime replacement, no-fault warranty an ASSA ABLOY Group company. All rights reserved. 227

14 ELECTROMECHANICAL Electronic Specifications Input Voltage Output Voltage Indicators Operating Temperature Certifications 115 or 230VAC/50 or 60Hz input 6A at 12 or 24VDC LED voltage indicators -4 to 122 F (-20 to 50 C) UL 294 (6 th Edition) Listed; UL 603 Listed; ULC S318 Listed; UL 1481 Listed; RoHS compliant; ULC 5533 Securitron AQD6 Dual-Voltage Switching Power Supply How to Order Product Number Output Amps # of Outputs Class 2 Power- Limited Fuse Rating Fuse Type # of Relays Relay Type UL 294 UL 603 ULC S CAN/ULC S533-M87 AQD6 6 1 N L L L L AQD6-8F 6 8 Y 2A Fuse L L L L AQD6-8C 6 8 Y 1.4A PTC L L L L AQD6-8F8R 6 8 Y 2A Fuse 8 Access Control with Fire AQD6-8C1R 6 8 Y 1.04A PTC 1 Access Control with Fire L L L L L L L L AQD6-16F 6 16 Y 2A Fuse L L L L AQD6-16C 6 16 Y 1.4A PTC 0 _ L L L L L: Listed R: Recognized Dimensions Enclosure: 14" x 14" x 4-3/4" 228 an ASSA ABLOY Group company. All rights reserved.

15 SECURITRON EcoPower Power Supply EFFICIENT FLEXIBLE DEPENDABLE EcoFlex inside CERTIFIED ENERGY SAVINGS A SUSTAINABLE SOLUTION Overview Securitron EcoPower is a highly efficient power supply designed to work with a low-power electrified lock, like EcoFlex from Corbin Russwin and Sargent. Using a patented method, this full-featured access control power supply draws on the battery to power the lock, essentially putting the power supply to sleep and reducing standby power consumption to only 8.5mW (0.0085W). This creates a 99% energy savings compared to current linear and switching power supplies. Features and Benefits Extremely low power consumption, only 8.5mW standby power consumption with a 115V input Included battery provides up to 26 hours of backup Universal voltage input capabilities ( VAC) Aesthetic design allows for convenient installation near the lock Multiple mounting options: - Surface mounted - Recessed into drywall Use either the factory box or an existing UL Listed double-gang junction box Reduced low-current wire runs and wire run length provides additional cost savings Fire alarm input dry contact (NO or NC) One (1) 12V 800 mah battery included* Supports fail safe and fail secure lock configurations LED troubleshooting Built-in battery end-of-life notification system MagnaCare lifetime replacement, no-fault warranty *Battery not covered under MagnaCare warranty an ASSA ABLOY Group company. All rights reserved. 229

16 ELECTROMECHANICAL Electronic Specifications Input Voltage Output Voltage Indicators Operating Temperature VAC 12V LED troubleshooting -4 to 122 F (-20 to 50 C) Operating Humidity 5% to 90%, (non-condensing) Certifications UL 294 (6 th Edition) listed; UL603 listed; ULC-S533 listed; RoHS compliant; GreenCircle certified; EN Class A; EN Securitron EcoPower Power Supply How to Order EPS-05 EPS-05B EcoPower 0.5A Power Supply for Low-Power Locks EcoPower Replacement Circuit Board Dimensions 4" (101.6 mm) 3-3/4" (95.25 mm) 4" (101.6 mm) 230 an ASSA ABLOY Group company. All rights reserved.

17 SECURITRON AQM20 Multi-Voltage Switching Power Supply Overview The Securitron AccuPower AQM20 Series of multivoltage, supervised switching power supplies come with a battery charger, and provide up to 20 total amps of low-voltage DC output. These field-selectable units contain two (2) power modules with the flexibility for delivering 12VDC, 24VDC or 12 and 24VDC at the same time, with up to 16 independently controlled, powerlimited outputs. Features and Benefits Offers output in either 12VDC or 24VDC, or both 12VDC and 24VDC, field-selectable Rated up to 16A continuous output 12VDC, 8A continuous output at 24VDC Two internal transformers included Tolerates brownout and over-voltage input at +30% to -30% of selected line voltage, either 120VAC or 240VAC Includes thermal shutdown protection with auto restart Circuit breaker protects against over-current and reverse-battery faults Battery charger and power supervision included Dedicated voltage enables faster battery charging even under full load MagnaCare lifetime replacement, no-fault warranty an ASSA ABLOY Group company. All rights reserved. 231

18 ELECTROMECHANICAL Electronic Specifications Input Voltage Output Voltage Indicators Operating Temperature Certifications 120/240VAC field-selectable Up to 16A continuous output at 12VDC, 8A continuous output at 24VDC LED indicators and form "C" contacts for supervision -4 to 104 F (-20 to 40 C) UL 294 recognized component Securitron AQM20 Multi-Voltage Switching Power Supply How to Order Product Number Output Amps # of Outputs Class 2 Power- Limited Fuse Rating Fuse Type # of Relays Relay Type UL 294 AQM20 20/10 2 N R AQM20-8F 20/10 8 N 4A Fuse R AQM20-8C 20/10 8 N 3.08A PTC R AQM20-8F8R 20/10 8 N 2A Fuse 8 Access Control with Fire R AQM20-8C8R 20/10 8 Y 1.04A PTC 8 Access Control with Fire R AQM20-16F 20/10 16 N 3A Fuse R AQM20-16C 20/10 16 Y 1.5A PTC R L: Listed R: Recognized Dimensions Enclosure: 14" x 14" x 4-3/4" 232 an ASSA ABLOY Group company. All rights reserved.