PolyGard 2-channel Gas Controller MGC-03

Transcription

1 PolyGard 2-channel Gas Controller MGC-03 DESCRIPTION Gas measuring and monitoring controller based on state-ofthe-art micro-technology with integrated buzzer for continuous monitoring of the ambient air and detecting toxic and combustible gases and vapours as well as oxygen and Freon refrigerants. Other physical values with analog output signal can be connected as well. The MGC-03 is equipped with two analog inputs for the connection of external transmitters including detection of wire break and short-circuits. Up to four alarm thresholds are free programmable per input. Two alarm relays and one open collector output are available for the alarm messages. Configuration and operation are possible via the logical, simple system menu structure without specific programming knowledge. APPLICATION The MGC-03 is suitable for a wide range of commercial and industrial applications. Free programmable parameters and set-points enable the individual adaptation to a variety of possible applications in the field of gas measuring and monitoring. Standard enclosure FEATURES Suitable for toxic and combustible gases and vapours, oxygen, refrigerants, temperature, pressure, humidity etc. Logical menu structure in different languages Simple, fast commissioning due to pre-configuration with standard parameters and set-points Comfortable calibration and maintenance Four free programmable alarm thresholds per channel Modular design (plug-in technology) Two analog inputs for transmitters with standard current/ voltage signals Two alarm relays, potential-free, max. 3AC/DC, 0,5 A One open collector output, max. 3DC, 50 ma (0) 4 20 ma / (0) 2 10V analog signal output, freely configurable IP 65 version Enclosure fire-resistant according to UL 94V2 Integrated warning buzzer with reset function Approved according to EN ; ANSI/UL ; CAN/CSA-C22.2 No AC operating voltage (option) Up to three power relays (potential-free, max. 25AC, 5 A) (option) Uninterruptible emergency power supply (option) LED flash light red (option) 3 x warning lights, colours green red orange selectable (option) External warning horn (87 db) mounted on the housing (option) External multi-sound horn mounted on the housing (option) Heating (option) MSR Electronic GmbH Würdingerstr. 27a Pocking GERMANY 1 Mar 13

2 SPECIFICATIONS Electrical VDC/AC, reverse polarity protected 1 Power consumption (without options) 100 ma, max. (2.5 VA) Analog input (2) 4 20 ma, input resistance 200, (0) 2 10V, input resistance 25 k, overloadproof and short-circuit-proof Tension for external analog transmitter max. charge 50 ma Analog output, current or voltage selectable (0) 4 20 ma, charge 500 Ω (0) 2 1, charge 50 kω overload-proof and short-circuit-proof Alarm relay (1) 3AC/DC 0.5 A, potential-free, SPDT Alarm relay (1) 3AC/DC 0.5 A, potential-free, SPNO/SPNC Binary output (1) 3DC /50 ma open collector output Visualisation Display Two lines, 16 characters each Status LED (4) Normal operation- Fault- Alarm1- Alarm 2 Operation 4 push-buttons menu-driven Buzzer Acoustic pressure 83 db (A) (distance 200 mm/ 0.6 ft ) Frequency 2300 Hz Monitored medium Toxic, combustible, refrigerant gases with 4-20 ma / (0) 2-1 signal and vapours, oxygen, temperature, humidity, pressure, etc. Operating environment Humidity % RH non-condensing Working temperature -10 C to + 50 C (14 F to 122 F) Storage temperature 5 C to 30 C (41 F to 86 F) Pressure range Atmospheric ± 10 % Physical Enclosure: Type C and E Polycarbonate Flammability UL 94 V2 Enclosure colour RAL 7032 (light grey) Dimensions (W x H x D) type C 130 x 130 x 75 mm (5.12 x 5.12 x 2.95 inch.) Dimensions (W x H x D) type E 130 x 130 x 99 mm (5.12 x 5.12 x 3.90 inch.) Weight Approx. 0.6 kg (1.32 Ibs.) Installation Wall mounting Cable entry Standard 6 x M 20 Wire connection Screw type terminal, min mm 2 (24 AWG) max. 2.5 mm 2 (14 AWG) Guidelines EMC Directives 2004/108/EC Low Voltage Directive 2006/95/EC EN :2010 ANSI/UL CAN/CSA-C22.2 No CE Warranty 1 year on material 1 For option heating only VDC! MSR Electronic GmbH Würdingerstr. 27a Pocking GERMANY 2 Mar 13

3 Options Supply voltage 23AC 90-25AC 50/60 Hz Emergency power supply Supply duration 60 min. (only measuring system) Power relay 25AC, 5 A, potential free, change-over cont. LED flashing light IP65, LED, red, 3500 lm. Warning light VDC/AC 45 ma, max. (1.1 VA) External horn Acoustic pressure 87 db (A) (distance 1000 mm) Frequency 3500 Hz VDC 8 ma, max. (0.15 VA) External multi-sound horn Acoustic pressure db (A) (depending on sound type) Sound types VDC 30 ma, max. (depending on sound type) Heating Temperature controlled 3 C ±2 C (37.5 F ± 3.6 F) Ambient temperature - 30 C (- 22 F) VDC Power consumption 0.5 A; 12 VA Enclosure stainless steel, type 5 Material V2A steel, 1 mm, material corrosion resistant Colour Natural, brushed Dimensions (B x H xd) 113 x 135 x 45 mm (4.45 x 5.31 x 1.77 inch.) Weight ca. 0.5 kg (1.1 lbs.) Mounting Wall mounting, pillar mounting Cable entry Standard 2 x M 20 MSR Electronic GmbH Würdingerstr. 27a Pocking GERMANY 3 Mar 13

4 ORDERING INFORMATION Power Supply 0 24 VAC/DC (Standard) 1 23AC AC & UPS 1 Enclosure C Plastic (standard) 5 Stainless steel (on request) Plastic for option power relays, E warning lights 1 Not in housing type 5 Relay Relay 30V 0.5A 30V 0.5A Intern. buzzer (B) Open Standard configuration Collector alarm outputs Optional config. alarm outputs A Heating B -- Internal buzzer C 2 C 2 External horn, 87 db (max. 1 horn) D 2 D 2 Extern. multi-sound horn (max. 1) LED flashing light red (max. 1 LED) Power relays (max.3 relays) Warning light orange (max.1 orange) Warning light red (max. 1 x red) Power relays & warning light orange Power relays & warning light red Alarm 1 Alarm 2 Alarm 3 Alarm 4 2 not with power relays 3 not with LED flashing light MGC-03-X XXXXX-XXXXX Analog Input ma / 0-1 (Inp. 1 / 2) ma / 2-1 (Inp. 1 / 2) (Inp. 1 / 2) (Inp. 1 / 2) ma (Inp. 1 / 2) standard Warning light green (power) 0 Without 1 With Language 0 German 1 English 2 USA 3 Dutch 4 Danish 5 Czech 6 French 7 Special lang. 4 4 on request Configuration 0 Standard configuration 1 Customer specific config. 5 Power fail flashing light 0 without 1 with 5 Acc. to customer specs. Example: Gas Controller MGC-03, plastic housing, 23AC supply, power relay at alarm 1 and 2, internal buzzer, input 2 x 4-20 ma, power fail flashing light, standard configuration, language English Ordering number: MGC-03-E-122B MSR Electronic GmbH Würdingerstr. 27a Pocking GERMANY 4 Mar 13

5 NC NO CONNECTING DIAGRAM Transmitter MP 01 (0)2-1 DC 4-20 ma DC Transmitter MP 02 Analog Output Analog Output Signal: Adjustable via Jumper (0)4-20mA / (0) X4 (0)2-1 _Inp ma_inp. Analog_Out _Out DC MGC-03 R3 R4 R2 X5 DIO V Digital Input NO_1 NC_1 COM_1 COM_2 NO/NC_ V- V+ 230 R5 R6 R7 VAC L N PE X X X Option Power Supply 90-23AC R Int. Buzzer Ext. Flash Signal R1: SPDT, 3AC/DC, 0,5 A R2: SPNO/SPNC, 3AC/DC, 0,5 A R4: Open Collector, 3DC, 50 ma Option Power Relay max. 25AC / 5 A MSR Electronic GmbH Würdingerstr. 27a Pocking GERMANY 5 Mar 13