Programming Worksheets

Transcription

1 WARNING This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. NT9010 v1.1a Programming Worksheets

2 Table of Contents Section 1: Basic Programming 1 Account Information... 1 Zone Summary... 1 Central Station Telephone Number... 1 NT9010 Account Code... 1 Section 2: Advanced Programming 2 Zone Definitions... 2 System Times and Codes... 2 Zone Attributes...5 System Timers... 6 Section 3: Advanced Communicator Programming 7 Telephone Numbers... 7 Account Codes...7 Reporting Codes... 7 [360] Communicator Format Options...10 Call Direction Options [370] Communication Variables Section 4: Downloading Options 13 Section 5: International Programming 14 Section 6: Talk/Listen-in Programming 15 [802] Audio Interface Programming Section 7: Wireless Receiver Programming 18 [804] Wireless Receiver Programming Wireless Key Function Button Options Zone Supervision Section 8: Function Keys, Voice Prompt Interface, and Special Zone Programming 22 [807] Voice Prompt Interface Programming Programming the System and Zone Labels Section 9: Special Installer Functions 26 Appendix A: Audio Label Library 27 Limited Warranty Digital Security Controls Ltd. warrants the original purchaser that for a period of twelve months from the date of purchase, the product shall be free of defects in materials and workmanship under normal use. During the warranty period, Digital Security Controls Ltd. shall, at its option, repair or replace any defective product upon return of the product to its factory, at no charge for labour and materials. Any replacement and/or repaired parts are warranted for the remainder of the original warranty or ninety (90) days, whichever is longer. The original owner must promptly notify Digital Security Controls Ltd. in writing that there is defect in material or workmanship, such written notice to be received in all events prior to expiration of the warranty period. International Warranty The warranty for international customers is the same as for any customer within Canada and the United States, with the exception that Digital Security Controls Ltd. shall not be responsible for any customs fees, taxes, or VAT that may be due. Warranty Procedure To obtain service under this warranty, please return the item(s) in question to the point of purchase. All authorized distributors and dealers have a warranty program. Anyone returning goods to Digital Security Controls Ltd. must first obtain an authorization number. Digital Security Controls Ltd. will not accept any shipment whatsoever for which prior authorization has not been obtained. Conditions to Void Warranty This warranty applies only to defects in parts and workmanship relating to normal use. It does not cover: damage incurred in shipping or handling; damage caused by disaster such as fire, flood, wind, earthquake or lightning; damage due to causes beyond the control of Digital Security Controls Ltd. such as excessive voltage, mechanical shock or water damage; damage caused by unauthorized attachment, alterations, modifications or foreign objects; damage caused by peripherals (unless such peripherals were supplied by Digital Security Controls Ltd.); defects caused by failure to provide a suitable installation environment for the products; damage caused by use of the products for purposes other than those for which it was designed; damage from improper maintenance; damage arising out of any other abuse, mishandling or improper application of the products. Digital Security Controls Ltd. s liability for failure to repair the product under this warranty after a reasonable number of attempts will be limited to a replacement of the product, as the exclusive remedy for breach of warranty. Under no circumstances shall Digital Security Controls Ltd. be liable for any special, incidental, or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability, or any other legal theory. Such damages include, but are not limited to, loss of profits, loss of the product or any associated equipment, cost of capital, cost of substitute or replacement equipment, facilities or services, down time, purchaser s time, the claims of third parties, including customers, and injury to property. Disclaimer of Warranties This warranty contains the entire warranty and shall be in lieu of any and all other warranties, whether expressed or implied (including all implied warranties of merchantability or fitness for a particular purpose) And of all other obligations or liabilities on the part of Digital Security Controls Ltd. Digital Security Controls Ltd. neither assumes nor authorizes any other person purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability concerning this product. This disclaimer of warranties and limited warranty are governed by the laws of the province of Ontario, Canada. WARNING: Digital Security Controls Ltd. recommends that the entire system be completely tested on a regular basis. However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical disruption, it is possible for this product to fail to perform as expected. Installer s Lockout Any products returned to DSC which have the Installer s Lockout option enabled and exhibit no other problems will be subject to a service charge. Out of Warranty Repairs Digital Security Controls Ltd. will at its option repair or replace out-of-warranty products which are returned to its factory according to the following conditions. Anyone returning goods to Digital Security Controls Ltd. must first obtain an authorization number. Digital Security Controls Ltd. will not accept any shipment whatsoever for which prior authorization has not been obtained. Products which Digital Security Controls Ltd. determines to be repairable will be repaired and returned. A set fee which Digital Security Controls Ltd. has predetermined and which may be revised from time to time, will be charged for each unit repaired. Products which Digital Security Controls Ltd. determines not to be repairable will be replaced by the nearest equivalent product available at that time. The current market price of the replacement product will be charged for each replacement unit. Products which Digital Security Controls Ltd. determines not to be repairable will be replaced by the nearest equivalent product available at that time. The current market price of the replacement product will be charged for each replacement unit.

3 Section 1: Basic Programming If you are programming the system using the Flash Programming, record your programming choices here. If you need to perform more advanced programming, record your choices in the space provided in the rest of this booklet. NOTE: All programming sections of this manual are applicable to the NT9010 and NT9010A. Account Information Customer: Address: Telephone: Installation Date: Installer s Code: Zone Summary Use this area to record a summary of your zone set up. You can use the NT9010 Flash Programming to enroll zones and program zone labels. You can perform more advanced zone programming in programming sections [001] - [004] and [101] - [132]. Zone Serial Number Label Zone Serial Number Label 1 I I I I I I I I I 17 I I I I I I I I I 2 I I I I I I I I I 18 I I I I I I I I I 3 I I I I I I I I I 19 I I I I I I I I I 4 I I I I I I I I I 20 I I I I I I I I I 5 I I I I I I I I I 21 I I I I I I I I I 6 I I I I I I I I I 22 I I I I I I I I I 7 I I I I I I I I I 23 I I I I I I I I I 8 I I I I I I I I I 24 I I I I I I I I I 9 I I I I I I I I I 25 I I I I I I I I I 10 I I I I I I I I I 26 I I I I I I I I I 11 I I I I I I I I I 27 I I I I I I I I I 12 I I I I I I I I I 28 I I I I I I I I I 13 I I I I I I I I I 29 I I I I I I I I I 14 I I I I I I I I I 30 I I I I I I I I I 15 I I I I I I I I I 31 I I I I I I I I I 16 I I I I I I I I I 32 I I I I I I I I I Central Station Telephone Number I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I NT9010 Account Code I I I I I 1

4 Section 2: Advanced Programming Zone Definitions 00 Null Zone (Not Used) Hour Supervisory Buzzer Hour Freeze 01 Delay Hour Burglary Hour Latching Tamper 02 Delay Hour Holdup 22 Momentary Keyswitch Arm 03 Instant Hour Gas 23 Maintained Keyswitch Arm 04 Interior Hour Heating (N/C zone) 24 For future use 05 Interior, Stay/Away Hour Medical 25 Interior Delay 06 Delay, Stay/Away Hour Panic 87 Delay 24 Hour Fire (Wireless) 07 For future use Hour Emergency 88 Standard 24 Hour Fire (Wireless) 08 For future use Hour Sprinkler 09 For future use Hour Water NOTE: You can also program zone definitions using the NT9010 Flash Programming. NOTE: Zone Attributes are assigned in sections [101] - [132]. Section # Zone # Default Zone Defn. Section # Zone # Default Zone Defn. [001] I I I [003] I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I [002] I I I [004] I I I I I I I I I System Times and Codes I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I NOTE: A 2-second steady tone indicates an invalid entry or selection. [005] System Times] Default Valid entries: [ ] 030 I I I I Entry Delay 1 (in seconds) (2.2.7 Entry and Exit Delay Options on page 24 ) 045 I I I I Entry Delay 2 (in seconds) (2.2.7 Entry and Exit Delay Options on page 24 ) 030 I I I I Exit Delay (in seconds) (2.2.7 Entry and Exit Delay Options on page 24 ) 005 I I I I Bell Cut-off (in minutes) (2.2.8 Bell Options on page 25 ) 2 Refer to section xx and page xx in the Installation Guide.

5 Section 2: Advanced Programming [006] Installer s Code (2.2.2 Access Codes on page 19 ) Default: 5555 I I I I I [007] Master Code (2.2.2 Access Codes on page 19 ) Default: 1234 I I I I I [008] Maintenance Code (2.2.2 Access Codes on page 19 ) NOTE: Valid codes are Enter AAAA to disable maintenance code. Default: AAAA I I I I I [012] Keypad Lockout Options ( Keypad Options on page 33 ) NOTE: If Keypad Lockout is active, the panel cannot be disarmed with a keyswitch. Default 000 I I I I Number of Invalid Codes Before Lockout ( codes) 000 I I I I Lockout Duration ( minutes) [013] First System Option Code Section/ Page # OFF I I 1 Hardwired Zones are Normally Closed Hardwired Zones use End-of-Line Resistors / 5 OFF I I 2-3 For future use OFF I I 4 Tampers/Faults Do Not Sound as Open Tampers/Faults Sound as Open / 25 OFF I I 5 For future use ON I I 6 Audible Exit Fault Enabled Audible Exit Fault Disabled / 24 ON I I 7 Event Buffer Follows Swinger Shutdown Event Buffer Logs Events Past shutdown / 50 OFF I I 8 Temporal Three Fire Signal Enabled** Standard Pulsed Fire Signal / 25 **The Temporal Three Fire Signal option must be used for Household Fire installations. [014] Second System Option Code Section/ Page # OFF I I 1 Arm / Disarm Bell Squawk enabled Arm / Disarm Bell Squawk disabled / 22 OFF I I 2 Bell Squawk During Auto Arm No Bell Squawk During Auto Arm / 24 OFF I I 3 Bell Squawk On Exit Delay No Bell Squawk On Exit Delay / 24 OFF I I 4 Bell Squawk On Entry Delay No Bell Squawk On Entry Delay / 24 OFF I I 5 Bell Squawk On Trouble No Bell Squawk On Trouble / 25 ON I I 6 Audible Exit with Urgency Silent Exit Delay / 24 OFF I I 7 Exit Delay Termination Enabled Exit Delay Termination Disabled / 24 OFF I I 8 Fire Bell is Continuous Fire Bell Follows Bell Cut-off / 25 Refer to section xx and page xx in the Installation Guide. 3

6 Programming Worksheets [015] Third System Option Code Section/ Page # ON I I 1 Fire Keys Enabled Fire Keys Disabled / 32 OFF I I 2 Panic Keys Audible (Bell / Beeps) Panic Keys Silent / 32 ON I I 3 Quick Exit Enabled Quick Exit Disabled / 25 ON I I 4 [017] Fifth System Option Code Quick Arming Enabled/Function keys do not require code Quick Arming Disabled/Function keys require code / 25 OFF* I I 5 Code Required For Bypassing No Code Required / 25 OFF I I 6 Master Code Not Changeable Master Code Changeable / 19 ON I I 7 TLM Enabled TLM Disabled / 49 ON I I 8 TLM Audible (Bell) When Armed TLM Trouble Beeps When Armed / 49 *If option [5] is ON, function keys programmed as [08] Bypass will require an access code when used, even if Option [4] is also on. [016] Fourth System Option Code Section/ Page # OFF I I 1-2 For future use OFF I I 3 Blank Keypad When Not Used Keypad Active Always / 33 OFF I I 4 Code Required to Remove Kypd Blanking No Code Required / 33 ON I I 5 Keypad Backlighting is enabled Keypad Backlighting is disabled / 33 OFF I I 6 For future use OFF I I 7 Bypass Status Displayed While Armed Bypass Status Not Displayed While Armed / 33 OFF I I 8 For future use Section/ Page # ON I I 1 WLS Key Does Not Use Access Codes WLS Key Uses Access Codes / 22 ON I I 2 Verbal Chime is Enabled Verbal Chime is Disabled (Beeps Only) / 21 ON I I 3 Verbal Alarm is Enabled Verbal Alarm is Disabled (Siren Only) / 21 ON * I I 4 Local Annunciation is Enabled Local Annunciation is Disabled / 5 OFF I I 5 Remote Annunciation is Enabled Remote Annunciation is Disabled / 5 OFF I I 6 For future use OFF I I 7 For future use OFF I I 8 Squawk on Away Arming/Disarming Only Bell Squawk on All Arming/Disarming / 22 NOTE: All programming should be done with local annunciation enabled. 4 Refer to section xx and page xx in the Installation Guide.

7 Section 2: Advanced Programming Zone Attributes (2.3.2 Zone Attributes on page 36 ) Zone Attribute Defaults (Y = Option ON; N = Option OFF): Attribute: ON Audible Steady Chime Bypass Force Swing Tx. Delay Wireless Zn. OFF Silent Pulsed No No No No No No Zone Type: 00 Null Zone N N N N N N N Y 01 Delay 1 Y Y Y Y Y Y N Y 02 Delay 2 Y Y Y Y Y Y N Y 03 Instant Y Y Y Y N Y N Y 04 Interior Y Y N Y N Y N Y 05 Int. Stay/Away Y Y N Y Y Y N Y 06 Dly. Stay/Away Y Y N Y Y Y N Y 10 24hr Superv. Buzzer N Y N Y N Y N Y 11 24hr Burglary Y Y N Y N Y N Y 12 24hr Holdup N Y N N N Y N Y 13 24hr Gas Y N N N N Y N Y 14 24hr Heating (N/C zone) Y N N N N Y N Y 15 24hr Medical Y Y N N N Y N Y 16 24hr Panic Y Y N N N Y N Y 17 24hr Emergency Y Y N N N Y N Y 18 24hr Sprinkler Y Y N N N Y N Y 19 24hr Water Y Y N N N Y N Y 20 24hr Freeze Y Y N N N Y N Y 21 24hr Latching Tamper Y Y N N N Y N Y 22 Momentary Keyswitch N N N N Y N N N 23 Maintained Keyswitch N N N N Y N N N 25 Interior Delay Y Y N Y N Y N Y 87 Dly. 24hr Fire (Wireless) Y N N N N N N Y 88 Stand. 24hr Fire (Wireless) Y N N N N N N Y Section Zone # Zone Type** Audible/ Silent Steady/ Pulsed Chime No Bypass No Force No Swing No Tx. Delay No Wireless No [101] 01 ( ) I I I I I I I I I I [102] 02 ( ) I I I I I I I I I I [103] 03 ( ) I I I I I I I I I I [104] 04 ( ) I I I I I I I I I I [105] 05 ( ) I I I I I I I I I I [106] 06 ( ) I I I I I I I I I I [107] 07 ( ) I I I I I I I I I I [108] 08 ( ) I I I I I I I I I I [109] 09 ( ) I I I I I I I I I I [110] 10 ( ) I I I I I I I I I I [111] 11 ( ) I I I I I I I I I I Refer to section xx and page xx in the Installation Guide. 5

8 Programming Worksheets Section Zone # **Record here based on programming in sections [001] - [004] System Timers Zone Type** Audible/ Silent Steady/ Pulsed Chime No [112] 12 ( ) I I I I I I I I I I [113] 13 ( ) I I I I I I I I I I [114] 14 ( ) I I I I I I I I I I [115] 15 ( ) I I I I I I I I I I [116] 16 ( ) I I I I I I I I I I [117] 17 ( ) I I I I I I I I I I [118] 18 ( ) I I I I I I I I I I [119] 19 ( ) I I I I I I I I I I [120] 20 ( ) I I I I I I I I I I [121] 21 ( ) I I I I I I I I I I [122] 22 ( ) I I I I I I I I I I [123] 23 ( ) I I I I I I I I I I [124] 24 ( ) I I I I I I I I I I [125] 25 ( ) I I I I I I I I I I [126] 26 ( ) I I I I I I I I I I [127] 27 ( ) I I I I I I I I I I [128] 28 ( ) I I I I I I I I I I [129] 29 ( ) I I I I I I I I I I [130] 30 ( ) I I I I I I I I I I [131] 31 ( ) I I I I I I I I I I [132] 32 ( ) I I I I I I I I I I [160] Maximum Dialing Attempts to Each Telephone Number (2.3.8 Communicator Dialing on page 39 ) Default: 003 I I I I Valid entries are attempts (do not enter 000). [161] Post Dial Wait for Handshake (All Formats) (2.3.8 Communicator Dialing on page 39 ) Default: 040 I I I I Valid entries are seconds Bypass No Force No Swing No Tx. Delay No Wireless No 6 Refer to section xx and page xx in the Installation Guide.

9 Section 3: Advanced Communicator Programming Telephone Numbers NOTE: For sections [301] to [353], the content of every section by default is [F], except for the first digit of the telephone numbers (sections [301] to [303], which is D ). [301] First Telephone Number (32 Digits) (2.3.9 Communicator Telephone Numbers on page 40 ) I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I [302] Second Telephone Number (32 Digits) (2.3.9 Communicator Telephone Numbers on page 40 ) I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I [303] Third Telephone Number (32 Digits) (2.3.9 Communicator Telephone Numbers on page 40 ) I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I Account Codes ( Communicator Account Codes on page 40 ) NOTE: Use [F] key to terminate phone number programming in sections [301] [303] Section Account Code for Telephone Numbers 1 and 3 [310] I I I I I Section Account Code for Telephone Number 2 [311] I I I I I Reporting Codes Alarm Reporting Codes, Zones ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [320] Zone 01 Zone 02 Zone 03 Zone 04 Zone 05 Zone 06 Zone 07 Zone 08 I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 1 I 1 I [321] Zone 09 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16 I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I [322] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24 I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I [323] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32 I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I Alarm Restoral Reporting Codes, Zones ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [324] Zone 01 Zone 02 Zone 03 Zone 04 Zone 05 Zone 06 Zone 07 Zone 08 I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 1 I 1 I [325] Zone 09 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16 I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I [326] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24 I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I [327] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32 I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I I 3 I A I Refer to section xx and page xx in the Installation Guide. 7

10 Programming Worksheets Miscellaneous Alarm Reporting Codes ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [328] I 2 I 1 I 1. Duress Alarm I I I 4. For Future Use I A I 6 I 2. Opening After Alarm I I I 5. For Future Use I I I 3. Recent Closing I I I 6. Cross Zone Police Code Alarm Priority Alarm and Restoral ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [329] I 1 I 5 I 1. Keypad Fire Alarm I 1 I 5 I 5. Keypad Fire Restoral I A I A I 2. Keypad Auxiliary Alarm* I A I A I 6. Keypad Auxiliary Restoral* I 2 I A I 3. Keypad Panic Alarm I 2 I A I 7. Keypad Panic Restoral I I I 4. For Future Use I I I 8. For Future Use *Also used as Medical Alarm and Restoral for units monitored in medical applications. Tamper Reporting Codes, Zones ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [330] Zone 01 Zone 02 Zone 03 Zone 04 Zone 05 Zone 06 Zone 07 Zone 08 I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I [331] Zone 09 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16 I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I [332] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24 I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I [333] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32 I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I Tamper Restoral Reporting Codes, Zones ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [334] Zone 01 Zone 02 Zone 03 Zone 04 Zone 05 Zone 06 Zone 07 Zone 08 I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I [335] Zone 09 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16 I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I [336] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24 I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I [337] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32 I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I I 4 I 4 I Miscellaneous Tamper Reporting Codes ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [338] I 2 I 1 I Keypad Lockout 8 Refer to section xx and page xx in the Installation Guide.

11 Section 3: Advanced Communicator Programming Closing (Arming) Reporting Codes, Access Codes 1-32 ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [339] Code 01 Code 02 Code 03 Code 04 Code 05 Code 06 Code 07 Code 08 I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I [340] Code 09 Code 10 Code 11 Code 12 Code 13 Code 14 Code 15 Code 16 I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I [341] Code 17 Code 18 Code 19 Code 20 Code 21 Code 22 Code 23 Code 24 I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I [342] Code 25 Code 26 Code 27 Code 28 Code 29 Code 30 Code 31 Code 32 I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I Miscellaneous Closing (Arming) Reporting Codes ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [343] I A I 2 I 1. Closing by Duress Code 33 I A I 2 I 5. Closing by System Code 42 I A I 2 I 2. Closing by Duress Code 34 I 7 I A I 6. Partial Closing I A I 2 I 3. Closing by System Code 40 I A I A I 7. Special Closing I A I 2 I 4. Closing by System Code 41 Opening (Disarming) Reporting Codes, Access Codes 1-32 ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [344] Code 01 Code 02 Code 03 Code 04 Code 05 Code 06 Code 07 Code 08 I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I [345] Code 09 Code 10 Code 11 Code 12 Code 13 Code 14 Code 15 Code 16 I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I [346] Code 17 Code 18 Code 19 Code 20 Code 21 Code 22 Code 23 Code 24 I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I [347] Code 25 Code 26 Code 27 Code 28 Code 29 Code 30 Code 31 Code 32 I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I I A I 2 I Miscellaneous Opening (Disarming) Reporting Codes ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [348] I A I 2 I 1. Opening by Duress Code 33 I A I 2 I 5. Opening by System Code 42 I A I 2 I 2. Opening by Duress Code 34 I A I 5 I 6. Auto-arm Cancellation I A I 2 I 3. Opening by System Code 40 I A I 2 I 7. Special Opening I A I 2 I 4. Opening by System Code 41 Refer to section xx and page xx in the Installation Guide. 9

12 Programming Worksheets Maintenance Alarm Reporting Codes ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [349] I A I 2 I 1. Battery Trouble Alarm I I I 5. For Future Use I A I 1 I 2. AC Failure Trouble Alarm I I I 6. For Future Use I 2 I 1 I 3. Remote Sounder Trouble Alarm I I I 7. For Future Use I 7 I 3 I 4. Fire Trouble Alarm I I I 8. For Future Use Maintenance Restoral Reporting Codes ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [350] I A I 2 I 1. Battery Trouble Restoral I I I 5. For Future Use I A I 1 I 2. AC Failure Trouble Restoral I 5 I 1 I 6. TLM Restoral I 2 I 1 I 3. Remote Sounder Trouble Restoral I I I 7. For Future Use I 7 I 3 I 4. Fire Trouble Restoral I I I 8. For Future Use Miscellaneous Maintenance Reporting Codes ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [351] I 5 I 4 I 1. Telephone Number 1 FTC Restore I 1 I 2 I 5. DLS Lead Out I 5 I 4 I 2. Telephone Number 2 FTC Restore I 7 I 2 I 6. Zone Fault Alarm I I I 3. Event Buffer 75% Full I 7 I 2 I 7. Zone Fault Restore I 1 I 1 I 4. DLS Lead IN I I I 8. Delinquency Code Test Transmission Reporting Codes ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [352] I A I 2 I 1. Periodic Test Transmission I I I 3. For Future Use I A I 2 I 2. System Test Wireless Maintenance Reporting Codes ( Communicator Reporting Codes on page 44 ) and (Appendix B: Reporting Codes on page 54 ) Section [353] I 8 I 4 I 1. General Zone Low Battery Alarm I 8 I 4 I 2. General Zone Low Battery Restoral [360] Communicator Format Options ( Communicator Reporting Formats on page 41 ) NOTE: The Third telephone number follows the format of the First telephone number. Default 03 I I I 1st/3rd Telephone Number 03 I I I 2nd Telepphone Number BPS, 1400 HZ handshake BPS, 2300 HZ handshake 03 DTMF CONTACT ID 04 SIA FSK 05 Pager 10 Refer to section xx and page xx in the Installation Guide.

13 Section 3: Advanced Communicator Programming Call Direction Options [361] Alarm/Restore Communicator Call Directions (2.3.8 Communicator Dialing on page 39 ) ON I I 1 1st Telephone Number Disabled OFF I I 2 2nd Telephone Number Disabled OFF I I 3-8 For future use [363] Tamper/Restore Communicator Call Directions (2.3.8 Communicator Dialing on page 39 ) ON I I 1 1st Telephone Number Disabled OFF I I 2 2nd Telephone Number Disabled OFF I I 3-8 For future use [365] Opening/Closing Communicator Call Directions (2.3.8 Communicator Dialing on page 39 ) OFF I I 1 1st Telephone Number Disabled OFF I I 2 2nd Telephone Number Disabled OFF I I 3-8 For future use [367] System Maintenance Alarm/Restore Communicator Call Directions (2.3.8 Communicator Dialing on page 39 ) ON I I 1 1st Telephone Number Disabled OFF I I 2 2nd Telephone Number Disabled OFF I I 3-8 For future use [368] System Test Transmissions Communicator Call Directions (2.3.8 Communicator Dialing on page 39 ) ON I I 1 1st Telephone Number Disabled OFF I I 2 2nd Telephone Number Disabled OFF I I 3-8 For future use Refer to section xx and page xx in the Installation Guide. 11

14 Programming Worksheets [370] Communication Variables Default Section/ Page # 003 I I I I Swinger Shutdown (Alarms and Rest) ( Transmissions, 000=disabled) / I I I I Swinger Shutdown (Tampers and Rest) ( Transmissions, 000=disabled) / I I I I Swinger Shutdown (Maint and Rest) ( Transmissions, 000=disabled) / I I I I Communication Delay ( seconds) / I I I I AC Failure Communication Delay ( minutes) / I I I I TLM Trouble Delay (No. of checks required - valid entries ) / I I I I Test Transmission Cycle ( days) / I I I I Zone Low Battery Transmission Delay ( days) / I I I I Delinquency Transmission Cycle ( days/hours) / 44 NOTE: To disable the AC failure communications delay, program [000]. [371] Test Transmission Time of Day ( Test Transmissions on page 49 ) Default 9999 I I I I Valid entries are , 9999 to disable) Communicator Options [380] First Communicator Option Code Section/ Page # ON I I 1 Communications Enabled Communications Disabled / 39 OFF I I 2 Restorals on Bell Time-out Restorals Follow Zones / 44 OFF I I 3 Pulse Dialing DTMF Dialing / 39 ON I I 4 Switch to Pulse Dialing on 5th Attempt DTMF Dial For All Attempts / 39 ON I I 5 3rd Telephone Number enabled 3rd Telephone Number disabled / 40 ON I I 6 Alternate Dial (1st and 3rd) Call 1st Number, Backup to 3rd / 40 OFF I I 7 For future use OFF I I 8 Delinquency Follows Zone Activity (Hours) Delinquency Follows Arming (Days) / 44 [381] Second Communicator Option Code Section/ Page # OFF I I 1 Open After Alarm Kypd Ringback enabled Open After Alrm Kypd Ringback disabled / 22 OFF I I 2 Open After Alarm Bell Ringback enabled Open After Alrm Bell Ringback disabled / 22 OFF I I 3 SIA Sends Programmed Rep. Codes SIA Sends Automatic Rep. Codes / 41 OFF I I 4 Closing Confirmation Enabled Closing Confirmation Disabled / 22 ON I I 5 Talk/Listen on phone lines 1/3 No Talk/Listen on phone lines 1/ / 46 OFF I I 6 Talk/Listen on phone line 2 No Talk/Listen on phone line / 46 ON I I 7 Contact ID Uses Programmed Rep. Codes Contact ID Uses Auto Rep. Codes / 41 OFF I I 8 For future use 12 Refer to section xx and page xx in the Installation Guide.

15 Section 4: Downloading Options [401] First Downloading Option Code ( Downloading* on page 47 ) OFF I I 1 Answering Machine/Double Call Enabled Answering Machine/Double Call Disabled ON I I 2 User Can Enable DLS Window User Cannot Enable DLS Window OFF I I 3 Call-Back Enabled Call-Back Disabled OFF I I 4 User-initiated call-up enabled User-initiated call-up disabled OFF I I 5-8 For future use [402] Downloading Computer s Telephone Number (32 Digits) ( Downloading* on page 47 ) I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I [403] Downloading Access Code ( Downloading* on page 47 ) Default: 9010 I I I I I Enter 4 HEX digits [404] Panel Identification Code ( Downloading* on page 47 ) Default: 9010 I I I I I Enter 4 HEX digits [405] Answering Machine Double-call Timer ( Downloading* on page 47 ) Default: 060 I I I I (Valid entries are seconds) [406] Number of Rings to Answer On ( Downloading* on page 47 ) Default: 000 I I I I (Valid entries are rings [499] Initiate PC-Link (Local Downloading) ( Downloading* on page 47 ) To begin PC-Link downloading, enter [499][Installer s Code][499]. Refer to section xx and page xx in the Installation Guide. 13

16 Section 5: International Programming [701] First International Options Code Section/ Page # ON I I 1 For Future Use OFF I I 2 Time Base is Internal Crystal Time Base is AC Line / 50 OFF I I 3 AC/DC Arming Inhibit enabled AC/DC Arming Inhibit disabled / 22 OFF I I 4 All System Tampers Require Installer Reset All System Tampers follow Restore / 39 OFF I I 5 6-Digit User Access Codes 4-Digit User Access Codes / 19 OFF I I 6 Busy tone detection enabled Busy tone detection disabled / 39 OFF I I 7 For Future Use OFF I I 8 Standard Communications Priority UL Communications Priority / 39 [702] Second International Options Code Section/ Page # ON I I 1 Pulse Dialing Make/Break Ratio is 33/67 Pulse Dialing Make/Break Ratio is 40/ / 39 ON I I 2 Force Dialing enabled Force Dialing disabled / 39 OFF I I 3 Land Line Test Transmission in minutes Land Line Test Transmission in days / 49 OFF I I Hz Handshake Standard Handshake / 41 OFF I I 5 ID Tone enabled ID Tone disabled / 39 OFF I I HZ ID Tone 1300 Hz ID Tone / 39 OFF I I 7 Full 1-Hr User enabled DLS Window Full 6-Hr User enabled DLS Window / 47 OFF I I 8 Bell on FTC when armed FTC Trouble only when armed / 39 [703] Delay Between Dialing Attempts (2.3.8 Communicator Dialing on page 39 ) Default: 001 I I I I (Valid entries are Seconds) 14 Refer to section xx and page xx in the Installation Guide.

17 Section 6: Talk/Listen-in Programming NOTE: To program the Talk/Listen-in feature enter programming section [802], then sub-sections [10] through [55], as described below. [802] Audio Interface Programming Port Assignments - Zones ( Talk/Listen-in Programming on page 46 ) Enter the nearest Intercom Station Number (01= NT9010, 02=Remote Sounder, 00 = Not Used); Default = 00 [10] Zone 01 Zone 02 Zone 03 Zone 04 Zone 05 Zone 06 Zone 07 Zone 08 I I I I I I I I I I I I I I I I I I I I I I I I [11] Zone 09 Zone 10 Zone 11 Zone 12 Zone 13 Zone 14 Zone 15 Zone 16 I I I I I I I I I I I I I I I I I I I I I I I I [12] Zone 17 Zone 18 Zone 19 Zone 20 Zone 21 Zone 22 Zone 23 Zone 24 I I I I I I I I I I I I I I I I I I I I I I I I [13] Zone 25 Zone 26 Zone 27 Zone 28 Zone 29 Zone 30 Zone 31 Zone 32 I I I I I I I I I I I I I I I I I I I I I I I I Central Station (Listen-in) Telephone Key Functions ( Talk/Listen-in Programming on page 46 ) [00] Key Not Used [10] For Future Use [01] Talk To All Speakers [11] Cancel First Keypress [02] For Future Use [12] For Future Use [03] Listen to All [13] Zone Select for Listen-In [04] - [06] For Future Use [14] Switch to Next Microphone [07] Extend Time [15] Switch to Previous Microphone [08] For Future Use [16] For Future Use [09] Terminate Session [17] Mode Key Select a function (00-17) for each telephone key that will be used. Contact your central station to determine what functions to program. Program unused keys as [00]. You can program additional functions by setting one telephone key as a Mode key. For example, in section [40], by default the [9] key is programmed as the Mode key [40] Telephone Key Programming [41] Telephone Mode Key Programming Telephone Key Default Telephone Key Default 1 01 I I I [Mode Key] I I I 2 00 I I I [Mode Key] I I I 3 03 I I I [Mode Key] I I I 4 00 I I I [Mode Key] I I I 5 00 I I I [Mode Key] I I I 6 00 I I I [Mode Key] I I I 7 07 I I I [Mode Key] I I I 8 00 I I I [Mode Key] I I I 9 17 I I I [Mode Key] I I I 0 00 I I I [Mode Key] I I I * 00 I I I [Mode Key] + * 00 I I I # 11 I I I [Mode Key] + # 00 I I I Refer to section xx and page xx in the Installation Guide. 15

18 Programming Worksheets [50] First Audio Control Option Code ( Talk/Listen-in Programming on page 46 ) OFF I I 1 Zone 1 Alarm Enabled Zone 1 Alarm Disabled OFF I I 2 Zone 2 Alarm Enabled Zone 2 Alarm Disabled OFF I I 3 Zone 3 Alarm Enabled Zone 3 Alarm Disabled OFF I I 4 Zone 4 Alarm Enabled Zone 4 Alarm Disabled OFF I I 5 Zone 5 Alarm Enabled Zone 5 Alarm Disabled OFF I I 6 Zone 6 Alarm Enabled Zone 6 Alarm Disabled OFF I I 7 Zone 7 Alarm Enabled Zone 7 Alarm Disabled OFF I I 8 Zone 8 Alarm Enabled Zone 8 Alarm Disabled [51] Second Audio Control Option Code ( Talk/Listen-in Programming on page 46 ) OFF I I 1 Zone 9 Alarm Enabled Zone 9 Alarm Disabled OFF I I 2 Zone 10 Alarm Enabled Zone 10 Alarm Disabled OFF I I 3 Zone 11 Alarm Enabled Zone 11 Alarm Disabled OFF I I 4 Zone 12 Alarm Enabled Zone 12 Alarm Disabled OFF I I 5 Zone 13 Alarm Enabled Zone 13 Alarm Disabled OFF I I 6 Zone 14 Alarm Enabled Zone 14 Alarm Disabled OFF I I 7 Zone 15 Alarm Enabled Zone 15 Alarm Disabled OFF I I 8 Zone 16 Alarm Enabled Zone 16 Alarm Disabled [52] Third Audio Control Option Code ( Talk/Listen-in Programming on page 46 ) OFF I I 1 Zone 17 Alarm Enabled Zone 17 Alarm Disabled OFF I I 2 Zone 18 Alarm Enabled Zone 18 Alarm Disabled OFF I I 3 Zone 19 Alarm Enabled Zone 19 Alarm Disabled OFF I I 4 Zone 20 Alarm Enabled Zone 20 Alarm Disabled OFF I I 5 Zone 21 Alarm Enabled Zone 21 Alarm Disabled OFF I I 6 Zone 22 Alarm Enabled Zone 22 Alarm Disabled OFF I I 7 Zone 23 Alarm Enabled Zone 23 Alarm Disabled OFF I I 8 Zone 24 Alarm Enabled Zone 24 Alarm Disabled 16 Refer to section xx and page xx in the Installation Guide.

19 Section 6: Talk/Listen-in Programming [53] Fourth Audio Control Option Code ( Talk/Listen-in Programming on page 46 ) OFF I I 1 Zone 25 Alarm Enabled Zone 25 Alarm Disabled OFF I I 2 Zone 26 Alarm Enabled Zone 26 Alarm Disabled OFF I I 3 Zone 27 Alarm Enabled Zone 27 Alarm Disabled OFF I I 4 Zone 28 Alarm Enabled Zone 28 Alarm Disabled OFF I I 5 Zone 29 Alarm Enabled Zone 29 Alarm Disabled OFF I I 6 Zone 30 Alarm Enabled Zone 30 Alarm Disabled OFF I I 7 Zone 31 Alarm Enabled Zone 31 Alarm Disabled OFF I I 8 Zone 32 Alarm Enabled Zone 32 Alarm Disabled [54] Fifth Audio Control Option Code ( Talk/Listen-in Programming on page 46 ) OFF I I 1 Tampers Enabled Tampers Disabled OFF I I 2 Openings and Closings Enabled Openings and Closings Disabled OFF I I 3 Aux. Key Alarm Enabled Aux. Key Alarm Disabled OFF I I 4 Panic Key Alarm Enabled Panic Key Alarm Disabled OFF I I 5 Duress Alarm Enabled Duress Alarm Disabled OFF I I 6 For future use OFF I I 7 Opening After Alarm Enabled Opening After Alarm Disabled OFF I I 8 For future use NOTE: If any event is enabled for Talk/Listen-in, Communications MUST also be enabled (2.3.8 Communicator Dialing on page 39 ). [55] Audio Duration ( Talk/Listen-in Programming on page 46 ) Default Valid entries: seconds 90 I I I Refer to section xx and page xx in the Installation Guide. 17

20 Section 7: Wireless Receiver Programming NOTE: To program the NT9010 Wireless Receiver, enter programming section [804], then sub-sections [01] through [93], as described below. [804] Wireless Receiver Programming Wireless Device Serial Number Programming (2.3.4 Wireless Device Serial Numbers on page 37 ) NOTE: You can also program wireless device serial numbers using the NT9010 Flash Programming. Please see the NT9010 Quick Set Up Guide for more information. All wireless devices must pass the placement test, even if the serial number is entered in section [804]. 6-digit hexadecimal entry is required. When enrolling devices with 5-digit serial numbers, the first digit must be zero (0), followed by the 5-digit serial number (6-digits total). For example, to enter the serial number 42345, enter [042345]. Zone Serial Numbers Default = Section Zone Serial Number Section Zone Serial Number [01] 01 I I I I I I I [17] 17 I I I I I I I [02] 02 I I I I I I I [18] 18 I I I I I I I [03] 03 I I I I I I I [19] 19 I I I I I I I [04] 04 I I I I I I I [20] 20 I I I I I I I [05] 05 I I I I I I I [21] 21 I I I I I I I [06] 06 I I I I I I I [22] 22 I I I I I I I [07] 07 I I I I I I I [23] 23 I I I I I I I [08] 08 I I I I I I I [24] 24 I I I I I I I [09] 09 I I I I I I I [25] 25 I I I I I I I [10] 10 I I I I I I I [26] 26 I I I I I I I [11] 11 I I I I I I I [27] 27 I I I I I I I [12] 12 I I I I I I I [28] 28 I I I I I I I [13] 13 I I I I I I I [29] 29 I I I I I I I [14] 14 I I I I I I I [30] 30 I I I I I I I [15] 15 I I I I I I I [31] 31 I I I I I I I [16] 16 I I I I I I I [32] 32 I I I I I I I NOTE: When deleting any panic pendant, the supervision must be re-enabled in sections [82] to [85]. 18 Refer to section xx and page xx in the Installation Guide.

21 Section 7: Wireless Receiver Programming Wireless Key Serial Numbers Section Wireless Key Serial Number Section Wireless Key Serial Number [41] 01 I I I I I I I [49] 09 I I I I I I I [42] 02 I I I I I I I [50] 10 I I I I I I I [43] 03 I I I I I I I [51] 11 I I I I I I I [44] 04 I I I I I I I [52] 12 I I I I I I I [45] 05 I I I I I I I [53] 13 I I I I I I I [46] 06 I I I I I I I [54] 14 I I I I I I I [47] 07 I I I I I I I [55] 15 I I I I I I I [48] 08 I I I I I I I [56] 16 I I I I I I I Wireless Key Function Button Options ( Programming Wireless Keys on page 31 ) Entry Description 00 Null Key (Key not used) 03 Stay Arm 04 Away Arm 06 Door Chime On/Off 07 System Test 16 Quick Exit 17 Activate Stay/Away Zones 27 Disarm (Off) 28 FIre Alarm 29 Auxiliary or Medical Alarm 30 Panic Alarm NOTE: If using Wireless Keys for any arming function, you must enable the Quick Arming option in section [015], option [4]. Refer to section xx and page xx in the Installation Guide. 19

22 Programming Worksheets Wireless Key Function Buttons Section Button # Default [61] 1 03 I I I [62] 2 04 I I I [63] 3 27 I I I [64] 4 30 I I I Zone Supervision [81] Wireless Supervisory Window (2.3.5 Wireless Zone Supervision on page 38 ) Default 03 I I I Valid entries: hours NOTE: Do not program the supervisory window to 01. NOTE: Hardwired zones and RF Jam Detect zones should NOT be supervised, and must be disabled in the following sections. [82] Zone Transmitter Supervision Options (1-8) (2.3.5 Wireless Zone Supervision on page 38 ) ON I I 1 Zone 1 Supervision Enabled Zone 1 Supervision Disabled ON I I 2 Zone 2 Supervision Enabled Zone 2 Supervision Disabled ON I I 3 Zone 3 Supervision Enabled Zone 3 Supervision Disabled ON I I 4 Zone 4 Supervision Enabled Zone 4 Supervision Disabled ON I I 5 Zone 5 Supervision Enabled Zone 5 Supervision Disabled ON I I 6 Zone 6 Supervision Enabled Zone 6 Supervision Disabled ON I I 7 Zone 7 Supervision Enabled Zone 7 Supervision Disabled ON I I 8 Zone 8 Supervision Enabled Zone 8 Supervision Disabled [83] Zone Transmitter Supervision Options (9-16) (2.3.5 Wireless Zone Supervision on page 38 ) ON I I 1 Zone 9 Supervision Enabled Zone 9 Supervision Disabled ON I I 2 Zone 10 Supervision Enabled Zone 10 Supervision Disabled ON I I 3 Zone 11 Supervision Enabled Zone 11 Supervision Disabled ON I I 4 Zone 12 Supervision Enabled Zone 12 Supervision Disabled ON I I 5 Zone 13 Supervision Enabled Zone 13 Supervision Disabled ON I I 6 Zone 14 Supervision Enabled Zone 14 Supervision Disabled ON I I 7 Zone 15 Supervision Enabled Zone 15 Supervision Disabled ON I I 8 Zone 16 Supervision Enabled Zone 16 Supervision Disabled 20 Refer to section xx and page xx in the Installation Guide.

23 Section 7: Wireless Receiver Programming [84] Zone Transmitter Supervision Options (17-24) (2.3.5 Wireless Zone Supervision on page 38 ) ON I I 1 Zone 17 Supervision Enabled Zone 17 Supervision Disabled ON I I 2 Zone 18 Supervision Enabled Zone 18 Supervision Disabled ON I I 3 Zone 19 Supervision Enabled Zone 19 Supervision Disabled ON I I 4 Zone 20 Supervision Enabled Zone 20 Supervision Disabled ON I I 5 Zone 21 Supervision Enabled Zone 21 Supervision Disabled ON I I 6 Zone 22 Supervision Enabled Zone 22 Supervision Disabled ON I I 7 Zone 23 Supervision Enabled Zone 23 Supervision Disabled ON I I 8 Zone 24 Supervision Enabled Zone 24 Supervision Disabled [85] Zone Transmitter Supervision Options (25-32) (2.3.5 Wireless Zone Supervision on page 38 ) ON I I 1 Zone 25 Supervision Enabled Zone 25 Supervision Disabled ON I I 2 Zone 26 Supervision Enabled Zone 26 Supervision Disabled ON I I 3 Zone 27 Supervision Enabled Zone 27 Supervision Disabled ON I I 4 Zone 28 Supervision Enabled Zone 28 Supervision Disabled ON I I 5 Zone 29 Supervision Enabled Zone 29 Supervision Disabled ON I I 6 Zone 30 Supervision Enabled Zone 30 Supervision Disabled ON I I 7 Zone 31 Supervision Enabled Zone 31 Supervision Disabled ON I I 8 Zone 32 Supervision Enabled Zone 32 Supervision Disabled Refer to section xx and page xx in the Installation Guide. 21

24 Section 8: Function Keys, Voice Prompt Interface, and Special Zone Programming NOTE: To program the NT9010 Voice Prompt Interface, Function Keys, Hardwired Zones, or the RF Jamming Detection zone, enter programming section [807], then sub-sections [000] through [705], as described below. NOTE: All entries in this section are in decimal. Valid digits are 0-9, A-F are invalid. [807] Voice Prompt Interface Programming [000] NT9010 Function Key Programming ( Function Keys on page 29 ) Function Key Options: 00 Null Key 08 [*][1] Bypass Mode 17 [*][1] Reactivate Stay/Away Zones For future use 09 [*][2] Trouble Display For future use 03 Stay Arm 10 [*][3] Alarm Memory 27 Status 04 Away Arm 11 [*][5] User Programming 28 Volume Control 05 [*][9] No-Entry Arm 12 [*][6] User Functions 29 Memo Record 06 [*][4] Chime On / Off For future use 30 Memo Playback 07 [*][6][ ][4] System Test 16 [*][0] Quick Exit NT9010 Defaults: Function Key 1 Function Key 2 Function Key 3 Function Key 4 Function Key 5 Function Key 6 Function Key 7 Function Key I I I I I I I I I I I I I I I I I I I I I I I I [002] First Voice Prompt Option Code (2.2.3 Voice Prompt Interface on page 21 ) ON I I 1 Clock is AM/PM Clock is 24 Hour ON I I 2 Verbal Chime for Zone Openings Verbal Chime Disabled for Zone Openings OFF I I 3 Verbal Chime for Zone Closings Verbal Chime Disabled for Zone Closings OFF I I 4-8 For future use [003] Status Prompt Mask (2.2.3 Voice Prompt Interface on page 21 ) ON I I 01 Warning, Bypass On Prompt enabled Prompt disabled ON I I 02 System Trouble... Prompt enabled Prompt disabled ON I I 03 System Open, Zone... Prompt enabled Prompt disabled ON I I 04 Alarms in Memory Prompt enabled Prompt disabled ON I I 05 Service Required Prompt enabled Prompt disabled ON I I 06 AC Power Trouble Prompt enabled Prompt disabled ON I I 07 Phone Line Trouble Prompt enabled Prompt disabled ON I I 08 Communication Trouble Prompt enabled Prompt disabled ON I I 09 Zone Fault Prompt enabled Prompt disabled ON I I 10 Zone Tamper Prompt enabled Prompt disabled ON I I 11 Zone Low Battery Prompt enabled Prompt disabled ON I I 12 Time and Date Incorrect Prompt enabled Prompt disabled 22 Refer to section xx and page xx in the Installation Guide.

25 Section 8: Function Keys, Voice Prompt Interface, and Special Zone Programming [004] Star Function Prompt Mask (2.2.3 Voice Prompt Interface on page 21 ) ON l l 01 For Zone Bypassing Prompt enabled Prompt disabled ON l l 02 For System Troubles Prompt enabled Prompt disabled ON l l 03 For Alarm Memory Prompt enabled Prompt disabled ON l l 04 For Door Chime Control Prompt enabled Prompt disabled OFF l l 05 For future use ON l l 06 For Special Functions Prompt enabled Prompt disabled OFF l l 07 For Memo Prompt enabled ON l l 08 For Arming Without Entry Prompt enabled Prompt disabled ON l l 09 For Quick Arming Prompt enabled Prompt disabled ON l l 10 For Quick Exit Prompt enabled Prompt disabled ON l l 11 To Arm Interior Zones Prompt enabled Prompt disabled ON l l 12 For Volume Control Prompt enabled Prompt disabled OFF l l 13 For future use OFF l l 14 For future use OFF l l 15 For future use ON l l 16 For User Programming Prompt enabled Prompt disabled [020] Local/Remote Telephone Access Code (2.2.1 Accessing the NT9010 System Using a Telephone on page 18 ) Default *** l l l l Enter 3 digits (0,1,2,3,4,5,6,7,8,9,*,#) NOTE: Avoid Codes that interfere with any local telephone equipment (e.g. fax machines, etc.), or that coincide with local telephone company 3-digit telephone numbers and services. Also do not exit this section by pressing [#], it will be accepted as a valid digit. [021] Telephone Access Options (2.2.1 Accessing the NT9010 System Using a Telephone on page 18 ) OFF l 01 Local Access Only Remote and Local Access enabled OFF l 02 Access code always req d for local access No code req d for local access NOTE: Local Access Only must be ON for UL Listed applications. [030] Alarm Tone Period for Verbal Alarm (2.2.4 Alarm Announce-ments on page 22 ) Default 015 l l l l Valid entries are seconds. Hardwired Loop Zone Assignment (2.3.3 Enrolling Hardwired Zones on page 37 ) Section Loop # Default Zone # [091] 1 00 I I I [092] 2 00 I I I Refer to section xx and page xx in the Installation Guide. 23

26 Programming Worksheets [093] RF Jamming Detection Zone (2.3.6 RF Jamming Detection Zone* on page 38 ) NOTE: Programming RF Jam Zone will automatically program the corresponding label as RF Jam. Please be sure that the corresponding serial number is (000000). RF Jam will not work properly otherwise. Default 00 I I I Select an unused zone that will go open when a jamming signal is present. Valid entries 01-32, 00 = disabled NOTE: Zone supervision must be disabled for RF Jam Detect zones and hardwired zones. Programming the System and Zone Labels (2.1.5 Programming Audio Labels on page 16 ) You can program labels for the system and for the zones through the NT9010 Flash Programming, or through the following programming sections. To program the labels using these programming sections: 1. Enter the 3-digit sub-section for the label ([601] to [633]). 2. Enter the 3-digit code for each word you want to program. You can enter up to six words for each label. Please see Audio Label Library on page 27 for a list of the 3-digit codes for each available word. To add numbers to a label, see Programming Audio Labels on page 16. If your label is less than six words, press [#] at the end of the label. 3. If you want to use a recorded label, in place of the first word of the label, enter [244] then the number of the label [001] to [005]. The recorded label will replace all six words in the section. To record a label, see Programming Audio Labels on page When you have entered the label, the system will recite it. 5. If the label is correct, press [#]. To change the label, repeat steps 1-4, above. 24 Refer to section xx and page xx in the Installation Guide.

27 Section 8: Function Keys, Voice Prompt Interface, and Special Zone Programming. Section Label For: Default Label [601] Zone 1 l l l l l l l l l l l l l l l l l l l l l l l l Zone 1 [602] Zone 2 l l l l l l l l l l l l l l l l l l l l l l l l Zone 2 [603] Zone 3 l l l l l l l l l l l l l l l l l l l l l l l l Zone 3 [604] Zone 4 l l l l l l l l l l l l l l l l l l l l l l l l Zone 4 [605] Zone 5 l l l l l l l l l l l l l l l l l l l l l l l l Zone 5 [606] Zone 6 l l l l l l l l l l l l l l l l l l l l l l l l Zone 6 [607] Zone 7 l l l l l l l l l l l l l l l l l l l l l l l l Zone 7 [608] Zone 8 l l l l l l l l l l l l l l l l l l l l l l l l Zone 8 [609] Zone 9 l l l l l l l l l l l l l l l l l l l l l l l l Zone 9 [610] Zone 10 l l l l l l l l l l l l l l l l l l l l l l l l Zone 10 [611] Zone 11 l l l l l l l l l l l l l l l l l l l l l l l l Zone 11 [612] Zone 12 l l l l l l l l l l l l l l l l l l l l l l l l Zone 12 [613] Zone 13 l l l l l l l l l l l l l l l l l l l l l l l l Zone 13 [614] Zone 14 l l l l l l l l l l l l l l l l l l l l l l l l Zone 14 [615] Zone 15 l l l l l l l l l l l l l l l l l l l l l l l l Zone 15 [616] Zone 16 l l l l l l l l l l l l l l l l l l l l l l l l Zone 16 [617] Zone 17 l l l l l l l l l l l l l l l l l l l l l l l l Zone 17 [618] Zone 18 l l l l l l l l l l l l l l l l l l l l l l l l Zone 18 [619] Zone 19 l l l l l l l l l l l l l l l l l l l l l l l l Zone 19 [620] Zone 20 l l l l l l l l l l l l l l l l l l l l l l l l Zone 20 [621] Zone 21 l l l l l l l l l l l l l l l l l l l l l l l l Zone 21 [622] Zone 22 l l l l l l l l l l l l l l l l l l l l l l l l Zone 22 [623] Zone 23 l l l l l l l l l l l l l l l l l l l l l l l l Zone 23 [624] Zone 24 l l l l l l l l l l l l l l l l l l l l l l l l Zone 24 [625] Zone 25 l l l l l l l l l l l l l l l l l l l l l l l l Zone 25 [626] Zone 26 l l l l l l l l l l l l l l l l l l l l l l l l Zone 26 [627] Zone 27 l l l l l l l l l l l l l l l l l l l l l l l l Zone 27 [628] Zone 28 l l l l l l l l l l l l l l l l l l l l l l l l Zone 28 [629] Zone 29 l l l l l l l l l l l l l l l l l l l l l l l l Zone 29 [630] Zone 30 l l l l l l l l l l l l l l l l l l l l l l l l Zone 30 [631] Zone 31 l l l l l l l l l l l l l l l l l l l l l l l l Zone 31 [632] Zone 32 l l l l l l l l l l l l l l l l l l l l l l l l Zone 32 [633] Fire Alarm l l l l l l l l l l l l l l l l l l l l l l l l Fire Zone Recording Custom Labels You can record up to five custom labels for the system and for the zones using programming sections [701] to [705]. You can use any of these labels for the system or zone labels, instead of the words available on the Audio Label Library. To record a custom label: 1. Enter one of sub-sections [701] to [705]. 2. Press the Record function key on the NT Speak into the NT9010 microphone. Each label can be up to 1.5 seconds long. To stop recording, press [#]. 4. When you are finished recording, press the Playback function key. The NT9010 plays your recorded label back to you. To listen to the label again, press Playback again. 5. If you want to re-record the label, press the Record function key again. 6. To record more labels, repeat steps 1 to 5. NOTE: If the NT9010 is completely powered down (both AC and battery power are lost), the recorded labels will be lost. 25