NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date

Transcription

1 NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od do Documents Title Closing date 1/2358/CD IEC ED2: International Electrotechnical Vocabulary - Part 195: Earthing and protection against electric shock 2/1906/FDIS IEC ED4: Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity 3/1357/CDV IEC ED2: Marking of electrical equipment with ratings related to electrical supply - Safety requirements 7/676/CD IEC TR ED2: Overhead electrical conductors - Calculation methods for stranded bare conductors 9/2412/FDIS IEC ED1: Railway applications - Energy measurement on board trains - Part 5: Conformance test 10/1058/CDV IEC ED3: Specification for re-use of SF6 and its mixtures in electrical equipment 14/964/FDIS IEC ED2: Power transformers - Part 11: Dry-type transformers 17A/1183/CD IEC/IEEE ED2: High-voltage switchgear and controlgear - Part : Alternating-current generator circuit-breakers 44/819/FDIS IEC ED2: Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above V AC or V DC and not exceeding 36 kv 45/849/CD IEC ED1: Mobile unmanned automated systems for nuclear and radiological applications - General requirements 46F/415/CD IEC ED1: Balanced-type circular disk resonator method to measure the complex permittivity of low-loss dielectric substrates 46F/416/CD IEC TS ED1: Radio frequency connectors - Part 1-51: Uncertainty specification of frequency domain test for return loss 46F/418/CD IEC ED1: Radio frequency connectors Part 63: Sectional specification RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock Characteristic impedance 75 ohms (type BNC) 47/2482/FDIS IEC ED1: Electronic components - Long-term storage of electronic semiconductor devices - Part 6: Packaged or finished devices 47E/602/CDV IEC ED1: Semiconductor devices - Part 16-6: Microwave integrated circuits - Frequency multipliers 56/1775/FDIS IEC ED3: Failure modes and effects analysis (FMEA and FMECA) 62D/1587/CDV IEC ED1: Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment 65/697/CD IEC TS ED2: Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid 65C/924/FDIS IEC X ED4: Industrial communication networks - Profiles - Part 5-x: Installation of fieldbuses - Installation profiles for CPF x 86A/1867/FDIS IEC ED2: Optical fibre cables - Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (all dielectric self-supported) optical cables Page 1 of 6

2 87/682/CDV Cancelled and withdrawn 110/981/CD IEC ED1: Laser display devices Part 5-5: Optical measuring methods of raster-scanning retina direct projection devices 113/426/CD IEC TS Ed.1.0: Nanomanufacturing - Key control characteristics Part 6-5: Two-dimensional materials - Measurement of contact and sheet resistance of 2D materials by transfer line measurement 113/427/CD IEC TS ED1: Nanomanufacturing - Material specifications, Part 1 - Basic concept 119/222/CD IEC ED1: Printed electronics Part : Materials - Conductive ink Measurement of peel strength for printed conductive layer on flexible substrate 122/60/DTS IEC TS ED1: UHV AC transmission systems - Part 101: Voltage regulation and insulation design for UHV AC transmission systems JTC1-SC25/2804/CD ISO/IEC TR 29106/AMD2 ED1: Information technology - Generic cabling - Introduction to the MICE environmental classification 2/1911/CD IEC TS ED1: Rotating electrical machines - Part 16-2: Excitation systems for synchronous machines - Models for power system studies 2/1912/CD IEC TS ED2: Rotating electrical machines - Part 16-3: Excitation systems for synchronous machines - Dynamic performance 9/2405/CDV IEC ED1: Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements specifications 23A/851/FDIS IEC 62275/AMD1 ED2: Cable management systems - Cable ties for electrical installations 31G/279/CD IEC ED3: Explosive atmospheres - Part 25: Intrinsically safe electrical systems 31M/130/FDIS ISO/IEC ED2: Explosive atmospheres - Part 34: Application of quality management systems for Ex Product manufacture 34/523/FDIS IEC /AMD1 ED2: Amendment 1 - Digital addressable lighting interface - Part 102: General requirements - Control gear 34/524/FDIS IEC /AMD1 ED1: Amendment 1 - Digital addressable lighting interface - Part 103: General requirements - Control devices 45A/1196/CDV IEC ED2: Nuclear power plants - Instrumentation, control, and electrical power systems important to safety - Requirements for electromagnetic compatibility testing 46/689/FDIS IEC ED1: Metallic cables and other passive components - Test methods Part 4-17: Electromagnetic compatibility (EMC) - Reduction factor 47E/605/CDV IEC ED3: Semiconductor devices - Part 9: Discrete devices - Insulated-gate bipolar transistors (IGBTs) 69/598/CD IEC TS ED1: Electric Vehicles conductive power supply system - Part 3-1: General Requirements for EV supply equipment where protection relies on double or reinforced insulation - AC and DC conductive power supply systems 69/599/CD IEC TS ED1: Electric Vehicles conductive power supply system - Part 3-2: Particular requirements EV supply equipment where protection relies on double or reinforced insulation - Voltage converter unit 69/600/CD IEC TS ED1: Electric Vehicles conductive power supply system - Part 3-2: Particular requirements EV supply equipment where protection relies on double or reinforced insulation - General definitions and requirements for CANopen communications 69/601/CD IEC TS ED1: Electric Vehicles conductive power supply system - Part 3-5: Particular requirements EV supply equipment where protection relies on double or reinforced insulation - Pre-defined communication parameters and general application objects Page 2 of 6

3 69/602/CD 69/603/CD IEC TS ED1: Electric Vehicles conductive power supply system - Part 3-6: Particular requirements for EV supply equipment where protection relies on double or reinforced insulation - Voltage converter and communication IEC TS ED1: Electric vehicles conductive power supply system - Part 3-7: Particular requirements for EV supply equipment where protection relies on double or reinforced insulation Battery system communication 81/586/CDV IEC ED2: Lightning density based on lightning location systems (LLS) - General principles 81/586/CDV IEC ED2: Lightning density based on lightning location systems (LLS) - General principles 86B/4130/FDIS IEC ED1: Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High power qualification of passive optical components for environmental category C 86B/4131/FDIS IEC ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance 104/801/CDV IEC ED3: Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations 115/186/CD IEC TS 61973/AMD1 ED1: High voltage direct current (HVDC) substation audible noise /88/CD IEC TS ED1: Solar thermal electric plants - Part 3-3: Systems and components - General requirements and test methods for solar receivers 119/212/CDV IEC ED1: Printed Electronics - Part 101: Terminology - Vocabulary 121A/215/CDV IEC ED4: Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches 121A/224/FDIS IEC Ed. 4: Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters JTC1-SC41/41/FDIS ISO/IEC ED1: Information technology - Internet of Things Reference Architecture (IoT RA) F/486/CD IEC TR 62757/AMD1 ED1: Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible AC transmission systems (FACTS) and their valve halls 22F/487/CD IEC 62823/AMD1 ED1: Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing 23A/851A/FDIS IEC ED3: Cable management systems - Cable ties for electrical installations 25/624/CD IEC ED2: Quantities and units - Part 6: Electromagnetism /986/CDV IEC ED3: Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems 49/1281/CDV IEC ED1: Quartz crystal units of assessed quality - Part 4: Crystal units with thermistors 59A/217/CD IEC ED1: Electric dishwashers for commercial use - Test methods for measuring the performance C/732(F)/CDV IEC ED3: Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor 65E/588/CDV IEC ED2: Field device integration (FDI) - Part 1: Overview 65E/589/CDV IEC ED2: Field Device Integration (FDI) - Part 2: FDI Client 65E/590/CDV IEC ED2: Field Device Integration (FDI) - Part 3: FDI Server 65E/591/CDV IEC ED2: Field Device Integration (FDI) - Part 4: FDI Packages 65E/592/CDV IEC ED2: Field Device Integration (FDI) - Part 5: FDI Information Model 65E/593/CDV IEC ED2: Field Device Integration (FDI) - Part 6: FDI Technology Mapping 65E/594/CDV IEC ED2: Field Device Integration (FDI) - Part 7: FDI Communication Devices 82/1427/CD IEC ED1: Solar trackers - Safety requirements Page 3 of 6

4 90/404/FDIS IEC ED1: Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires 90/405/CD IEC ED3: Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies 115/187/CD IEC TS 62344/AMD1 ED1: Design of earth electrode stations for high-voltage direct current (HVDC) links - General guidelines 121A/227/CD IEC TR ED1: Low-voltage switchgear and controlgear - Guidance for the developement of embedded software CIS/I/587/CD Amendment 1 - CISPR 32: Electromagnetic compatibility of multimedia equipment - Emission requirements - Fragment 6 SyCSmartEnergy/85/ IEC TS ED1: SRD: Generic Smart Grid Requirements - Part 2-4: Electric Transportation Domain DTS JTC1-SC25/2808/CD ISO/IEC ED1: Information technology -- Small Computer System Interface (SCSI) -- Part 224: Fibre Channel Protocol for SCSI, Fourth Version (FCP-4) 17A/1185/CD IEC ED3: High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kv up to and including 52 kv 21A/658/CD IEC ED1: Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium batteries for use in road vehicles not for the propulsion 29/994/CD IEC ED3: Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration /529/CD IEC ED3: Equipment for general lighting purposes - EMC immunity requirements 34/530/CD IEC ED2: Digital addressable lighting interface - Part 202: Particular requirements for control gear - Selfcontained emergency lighting (device type 1) 46F/414/CDV IEC ED1: Radio-frequency connectors Part 1-2: Electrical test methods - insertion loss 47/2474/CDV IEC ED1: Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices - Part 1: Classification of defects 47/2475/CDV IEC ED1: Semiconductor devices Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices - Part 2: Test method for defects using optical inspection 48B/2663/CD IEC ED1: Connectors for electronic equipment Part 1: Copper LC style connector for use with 1-pair balanced twisted pair cabling 48D/678/CD IEC ED1: Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC and IEC Series - Part 6: Air recirculation and bypass of indoor cabinets 55/1649/CDV IEC ED1: Specifications for particular types of winding wires Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, with a bonding layer 55/1650/CDV IEC /AMD1 ED4: Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire 55/1651/CDV IEC /AMD2 ED3: Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire 57/1997/CD IEC ED2: Communication networks and systems for power utility automation - Part 7-420: Basic communication structure - Distributed energy resources and distribution automation logical nodes 59F/349/CD IEC ED1: Surface cleaning appliances - Part 8: Dry vacuum cleaners for commercial use - Methods for measuring the performance Page 4 of 6

5 64/2280/CD IEC ED1: Low-Voltage electrical installations - Part 7-716: Requirements for special installations or locations DC power distribution over Information Technology Cable Infrastructure 82/1407(F)/CDV IEC ED1: Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 2: Grid connected systems - Maintenance of PV systems 82/1435/CD IEC TS ED1: Measurement procedures for materials used in photovoltaic modules - Part 6-3: Adhesion testing of interfaces within PV modules 86A/1870/DTR IEC TR ED1: Colour coding of optical fibre cables - Guidelines C/1515/CDV IEC ED1: Fibre optic active components and devices - Package and interface standards - Part 19: Photonic chip scale package 86C/1530/CD IEC TR ED2: Fibre optic communication system design guides - Part 5: Accommodation and compensation of chromatic dispersion 108/701/FDIS IEC ED3: Audio/video, information and communication technology equipment - Part 1: Safety requirements /427/CD IEC ED1: Electrical insulation systems - Procedures for thermal evaluation - Part 41: Specific requirements for electrical insulation systems for use in dry-type high-voltage transformers with operating voltages of 1kV and above CIS/A/1256/CDV CISPR /AMD1/FRAG1 ED4: Fragment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements SyCSmartEnergy/85/ IEC TS ED1: SRD: Generic Smart Grid Requirements - Part 2-4: Electric Transportation Domain DTS JTC1- ISO/IEC 30129/AMD1 ED1: Information technology -- Telecommunications bonding networks for buildings and other SC25/2801/CDV structures 17A/1181/CDV IEC ED2: High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kv and above 17A/1187/CD IEC ED2: High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactorbased controllers and motor-starters 22G/377/CD IEC ED1: Adjustable speed electrical power drive systems - Part 5-3: Safety requirements for encoders - Functional, Electrical and Environmental 23B/1262/CD IEC ED5: Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements Electronic switches 29/989/CDV IEC ED2: Electroacoustics Hearing aids Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids 34B/1988/CD IEC /AMD60 ED3: Amendment 60 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps 34B/1990/CD IEC /AMD55 ED3: Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders 34B/1992/CD IEC /AMD57 ED3: Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges 44/826/DTS IEC TS ED1: Safety of machinery - Safety-related sensors used for protection of person 45B/908/FDIS IEC ED1: Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems Page 5 of 6

6 51/1228/CDV IEC ED1: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores 51/1229/CDV IEC ED1: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 14: EFDcores 56/1778/CD IEC ED3: Fault tree analysis (FTA) 59F/350/CD IEC ED1: Surface cleaning appliances - Part 9: Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance 64/2284/DTS IEC TS ED1: Application guide: Residential electrical installation in direct current not intended to be connected to Public Distribution Network 65B/1118/CD IEC TS ED1: Performance Expression of Industrial Water Quality Analyzers Photometry 77B/792/CDV IEC ED4: Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test 86C/1518/CDV IEC ED2: Dynamic modules - Part 1: Performance standards - General conditions 88/675/CDV IEC ED1: Wind energy generation systems - Part 5: Wind turbine rotor blades 94/434/CD IEC ED1: Electromechanical elementary relays Part 4: Reed relays General and safety requirements 101/566/FDIS IEC ED1: Electrostatics - Part 6-1: Electrostatic control for healthcare - General requirements for facilities 105/683/CDV IEC ED1: Fuel cell technologies Part 2-100: Fuel cell modules Safety 112/428/CD IEC ED3: Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics 122/64/DTS IEC TS ED1: UHV AC transmission systems: Part 201: UHV AC substation design SyCSmartEnergy/88/ IEC TS ED1: Generic Smart Grid Requirements - Part 2-2: Market related Domain DTS Page 6 of 6