NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

Transcription

1 Official Journal of the European Union C 209 English edition Information and Notices Volume June 2018 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European Commission 2018/C 209/01 Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) /C 209/02 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council, Decision No 768/2008/EC of the European Parliament and of the Council, Regulation (EC) No 1221/2009 of the European Parliament and of the Council (Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) /C 209/03 Commission communication in the framework of the implementation of Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment and repealing Council Directive 89/686/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) /C 209/04 Commission communication in the framework of the implementation of Directive 2014/35/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) /C 209/05 Commission communication in the framework of the implementation of Directive 2013/53/EU of the European Parliament and of the Council on recreational craft and personal watercraft and repealing Directive 94/25/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) EN ( 1 ) Text with EEA relevance.

2

3 EN Official Journal of the European Union C 209/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/01) ESO ( 1 ) Reference and title of the standard (and reference document) First publication OJ Reference of superseded standard Date of cessation of presumption of conformity of superseded standard Note 1 CEN EN :2004+A1:2010 Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 1: Common requirements CEN EN :2006+A1:2010 Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 2: Printing and varnishing machines including pre-press machinery CEN EN :2011 Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology CEN EN :2014 Explosive atmospheres Explosion prevention and protection Part 2: Basic concepts and methodology for mining

4 C 209/2 EN Official Journal of the European Union CEN EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines EN 1710:2005+A1:2008/AC:2010 CEN EN 1755:2015 Industrial Trucks Safety requirements and verification Supplementary requirements for operation in potentially explosive atmospheres CEN EN :2000 Reciprocating internal combustion engines Safety requirements for design and construction of engines for use in potentially explosive atmospheres Part 1: Group II engines for use in flammable gas and vapour atmospheres CEN EN :2000 Reciprocating internal combustion engines Safety requirements for design and construction of engines for use in potentially explosive atmospheres Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust CEN EN :2000 Reciprocating internal combustion engines Safety requirements for design and construction of engines for use in potentially explosive atmospheres Part 3: Group II engines for use in flammable dust atmospheres CEN EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours EN 1839:2012 EN 14756: CEN EN 1953:2013 Atomising and spraying equipment for coating materials Safety requirements CEN EN 12581:2005+A1:2010 Coating plants Machinery for dip coating and electrodeposition of organic liquid coating material Safety requirements CEN EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure Safety requirements

5 EN Official Journal of the European Union C 209/3 CEN EN :2005+A1:2010 Mixing machinery for coating materials Safety requirements Part 1: Mixing machinery for use in vehicle refinishing CEN EN 13012:2012 Petrol filling stations Construction and performance of automatic nozzles for use on fuel dispensers CEN EN :2003 Leak detection systems Part 1: General principles CEN EN 13237:2012 Potentially explosive atmospheres Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres CEN EN :2004 Non-electrical equipment for use in potentially explosive atmospheres Part 2: Protection by flow restricting enclosure fr CEN EN :2005 Non-electrical equipment for use in potentially explosive atmospheres Part 3: Protection by flameproof enclosure d CEN EN :2016 Overfill prevention devices for static tanks for liquid fuels Part 1: Overfill prevention devices with closure device EN 13616: CEN EN :2012 Petrol filling stations Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units CEN EN :2012 Petrol filling stations Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers CEN EN :2012 Petrol filling stations Part 3: Safety requirements for construction and performance of shear valves

6 C 209/4 EN Official Journal of the European Union CEN EN :2012 Petrol filling stations Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers CEN EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles Nozzle, test requirements and dimensions CEN EN :2013 Cranes Offshore cranes Part 1: Generalpurpose offshore cranes CEN EN :2004+A1:2011 Determination of explosion characteristics of dust clouds Part 1: Determination of the maximum explosion pressure pmax of dust clouds CEN EN :2006+A1:2011 Determination of explosion characteristics of dust clouds Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt) max of dust clouds CEN EN :2006+A1:2011 Determination of explosion characteristics of dust clouds Part 3: Determination of the lower explosion limit LEL of dust clouds CEN EN :2004+A1:2011 Determination of explosion characteristics of dust clouds Part 4: Determination of the limiting oxygen concentration LOC of dust clouds CEN EN 14373:2005 Explosion suppression systems CEN EN 14460:2018 Explosion resistant equipment This is the first publication EN 14460: CEN EN 14491:2012 Dust explosion venting protective systems CEN EN :2006+A1:2009 Cranes Power driven winches and hoists Part 1: Power driven winches EN :2006+A1:2009/AC:2010

7 EN Official Journal of the European Union C 209/5 CEN EN :2006+A1:2009 Cranes Power driven winches and hoists Part 2: Power driven hoists EN :2006+A1:2009/AC:2010 CEN EN 14522:2005 Determination of the auto ignition temperature of gases and vapours CEN EN :2004 Explosion prevention and protection in underground mines Protective systems Part 1: 2- bar explosion proof ventilation structure EN :2004/AC:2006 CEN EN :2007 Explosion prevention and protection in underground mines Protective systems Part 2: Passive water trough barriers EN :2007/AC:2008 CEN EN :2007 Explosion prevention and protection in underground mines Protective systems Part 4: Automatic extinguishing systems for road headers EN :2007/AC:2008 CEN EN 14677:2008 Safety of machinery Secondary steelmaking Machinery and equipment for treatment of liquid steel CEN EN :2013 LPG equipment and accessories Construction and performance of LPG equipment for automotive filling stations Part 1: Dispensers CEN EN 14681:2006+A1:2010 Safety of machinery Safety requirements for machinery and equipment for production of steel by electric arc furnaces CEN EN 14797:2006 Explosion venting devices CEN EN 14973:2015 Conveyor belts for use in underground installations Electrical and flammability safety requirements

8 C 209/6 EN Official Journal of the European Union CEN EN 14983:2007 Explosion prevention and protection in underground mines Equipment and protective systems for firedamp drainage CEN EN 14986:2017 Design of fans working in potentially explosive atmospheres EN 14986: CEN EN 14994:2007 Gas explosion venting protective systems CEN EN 15089:2009 Explosion isolation systems CEN EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations CEN EN 15198:2007 Methodology for the risk assessment of nonelectrical equipment and components for intended use in potentially explosive atmospheres CEN EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres CEN EN 15268:2008 Petrol filling stations Safety requirements for the construction of submersible pump assemblies CEN EN 15794:2009 Determination of explosion points of flammable liquids CEN EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours CEN EN 16009:2011 Flameless explosion venting devices CEN EN 16020:2011 Explosion diverters CEN EN 16447:2014 Explosion isolation flap valves

9 EN Official Journal of the European Union C 209/7 CEN EN ISO 16852:2016 Flame arresters Performance requirements, test methods and limits for use (ISO 16852:2016) EN ISO 16852: CEN EN ISO/IEC :2016 Explosive atmospheres Part 20-2: Material characteristics Combustible dusts test methods (ISO/IEC :2016) EN 13821: EN ISO/IEC :2016/AC:2017 CEN EN ISO :2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements (ISO :2016) EN : CEN EN ISO :2016 Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Nonelectrical type of protection constructional safety 'c ', control of ignition sources 'b ', liquid immersion 'k ' (ISO :2016) EN :2011 EN :2005 EN : Cenelec EN :2013 Electrostatic hand-held spraying equipment Safety requirements Part 1: Hand-held spraying equipment for ignitable liquid coating materials EN 50050: Cenelec EN :2013 Electrostatic hand-held spraying equipment Safety requirements Part 2: Hand-held spraying equipment for ignitable coating powder EN 50050: Cenelec EN :2013 Electrostatic hand-held spraying equipment Safety requirements Part 3: Hand-held spraying equipment for ignitable flock EN 50050: Cenelec EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen Performance requirements and test methods Cenelec EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material Safety requirements

10 C 209/8 EN Official Journal of the European Union Cenelec EN 50177:2009 Stationary electrostatic application equipment for ignitable coating powders Safety requirements EN 50177:2009/A1: Note Cenelec EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material Safety requirements EN 50223: Cenelec EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen Requirements and tests for apparatus using software and/or digital technologies Cenelec EN :1998 Electrical apparatus for use in the presence of combustible dust Part 2-1: Test methods Methods for determining the minimum ignition temperatures of dust EN :1998/AC:1999 Cenelec EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust Cenelec EN 50381:2004 Transportable ventilated rooms with or without an internal source of release EN 50381:2004/AC:2005 Cenelec EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks Cenelec EN :2012 Explosive atmospheres Part 0: Equipment General requirements IEC :2011 (Modified) + IS1: EN :2012/A11: Note Cenelec EN :2014 Explosive atmospheres Part 1: Equipment protection by flameproof enclosures d IEC : EN :

11 EN Official Journal of the European Union C 209/9 Cenelec EN :2014 Explosive atmospheres Part 2: Equipment protection by pressurized enclosure p IEC : EN :2007 EN : EN :2014/AC:2015 Cenelec EN :2015 Explosive atmospheres Part 5: Equipment protection by powder filling q IEC : EN : Cenelec EN :2015 Explosive atmospheres Part 6: Equipment protection by liquid immersion o IEC : EN : Cenelec EN :2015 Explosive atmospheres Part 7: Equipment protection by increased safety e IEC : EN : EN IEC :2015/A1:2018 IEC :2015/A1:2017 This is the first publication Note Cenelec EN :2012 Explosive atmospheres Part 11: Equipment protection by intrinsic safety i IEC : EN : Cenelec EN :2010 Explosive atmospheres Part 15: Equipment protection by type of protection n IEC : Cenelec EN :2015 Explosive atmospheres Part 18: Equipment protection by encapsulation m IEC : EN : EN :2015/A1:2017 IEC :2014/A1: Note Cenelec EN :2010 Explosive atmospheres Part 20-1: Material characteristics for gas and vapour classification Test methods and data IEC : Cenelec EN :2010 Explosive atmospheres Part 25: Intrinsically safe electrical systems IEC :

12 C 209/10 EN Official Journal of the European Union EN :2010/AC:2013 Cenelec EN :2015 Explosive atmospheres Part 26: Equipment with Equipment Protection Level (EPL) Ga IEC : EN : Cenelec EN :2015 Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiation IEC : Cenelec EN :2016 Explosive atmospheres Part 29-1: Gas detectors Performance requirements of detectors for flammable gases IEC :2016 (Modified) EN : Cenelec EN :2010 Explosive atmospheres Part 29-4: Gas detectors Performance requirements of open path detectors for flammable gases IEC :2009 (Modified) Cenelec EN :2007 Explosive atmospheres Part 30-1: Electrical resistance trace heating General and testing requirements IEC : Cenelec EN :2017 Explosive atmospheres Part 30-1: Electrical resistance trace heating General and testing requirements IEC/IEEE :2015 (Modified) EN : Cenelec EN :2014 Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure t IEC : EN : Cenelec EN :2011 Explosive atmospheres Part 35-1: Caplights for use in mines susceptible to firedamp General requirements Construction and testing in relation to the risk of explosion IEC : EN :2011/AC:2011

13 EN Official Journal of the European Union C 209/11 Cenelec EN ISO/IEC :2011 Explosive atmospheres Part 34: Application of quality systems for equipment manufacture (ISO/ IEC :2011) ( 1 ) ESO: European standardisation organisation: CEN: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel Fax ( CENELEC: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel Fax ( ETSI: 650, route des Lucioles, Sophia Antipolis, FRANCE. Tel Fax ( Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal ( dow ), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. : The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. Note 3: NOTE: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 ( 1 ). Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. References to Corrigenda /AC:YYYY are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. More information about harmonised standards and other European standards on the Internet at ( 1 ) OJ C 338, , p. 31.

14 C 209/12 EN Official Journal of the European Union Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council, Decision No 768/2008/EC of the European Parliament and of the Council, Regulation (EC) No 1221/2009 of the European Parliament and of the Council (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02) ESO ( 1 ) Reference and title of the standard (and reference document) First publication OJ Reference of superseded standard Date of cessation of presumption of conformity of superseded standard Note 1 CEN EN ISO 9000:2015 Quality management systems Fundamentals and vocabulary (ISO 9000:2015) EN ISO 9000: CEN EN ISO 9001:2015 Quality management systems Requirements (ISO 9001:2015) EN ISO 9001: CEN EN ISO 14001:2015 Environmental management systems Requirements with guidance for use (ISO 14001:2015) EN ISO 14001: CEN EN ISO 14004:2016 Environmental management systems General guidelines on implementation (ISO 14004:2016) EN ISO 14004: CEN EN ISO 14015:2010 Environmental management Environmental assessment of sites and organizations (EASO) (ISO 14015:2001) CEN EN ISO 14020:2001 Environmental labels and declarations General principles (ISO 14020:2000) CEN EN ISO 14021:2016 Environmental labels and declarations Selfdeclared environmental claims (Type II environmental labelling) (ISO 14021:2016) EN ISO 14021: CEN EN ISO 14024:2018 Environmental labels and declarations Type I environmental labelling Principles and procedures (ISO 14024:2018) This is the first publication EN ISO 14024:

15 EN Official Journal of the European Union C 209/13 CEN EN ISO 14031:2013 Environmental management Environmental performance evaluation Guidelines (ISO 14031:2013) EN ISO 14031: CEN EN ISO 14040:2006 Environmental management Life cycle assessment Principles and framework (ISO 14040:2006) CEN EN ISO 14044:2006 Environmental management Life cycle assessment Requirements and guidelines (ISO 14044:2006) EN ISO 14044:2006/A1:2018 This is the first publication Note CEN EN ISO 14050:2010 Environmental management Vocabulary (ISO 14050:2009) CEN EN ISO 14063:2010 Environmental management Environmental communication Guidelines and examples (ISO 14063:2006) CEN EN ISO :2012 Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO :2006) CEN EN ISO :2012 Greenhouse gases Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO :2006) CEN EN ISO :2012 Greenhouse gases Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO :2006) CEN EN ISO 14065:2013 Greenhouse gases Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) EN ISO 14065:

16 C 209/14 EN Official Journal of the European Union CEN EN ISO 15189:2012 Medical laboratories Requirements for quality and competence (ISO 15189:2012, Corrected version ) EN ISO 15189: CEN EN ISO 15195:2003 Laboratory medicine Requirements for reference measurement laboratories (ISO 15195:2003) CEN EN ISO/IEC 17000:2004 Conformity assessment Vocabulary and general principles (ISO/IEC 17000:2004) CEN EN ISO/IEC 17011:2017 Conformity assessment Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017) EN ISO/IEC 17011: CEN EN ISO/IEC 17020:2012 Conformity assessment Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) EN ISO/IEC 17020: CEN EN ISO/IEC :2015 Conformity assessment Requirements for bodies providing audit and certification of management systems Part 1: Requirements (ISO/IEC :2015) EN ISO/IEC 17021: CEN EN ISO/IEC 17024:2012 Conformity assessment General requirements for bodies operating certification of persons (ISO/ IEC 17024:2012) EN ISO/IEC 17024: CEN EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) EN ISO/IEC 17025: CEN EN ISO 17034:2016 General requirements for the competence of reference material producers (ISO 17034:2016) CEN EN ISO/IEC 17040:2005 Conformity assessment General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005)

17 EN Official Journal of the European Union C 209/15 CEN EN ISO/IEC 17043:2010 Conformity assessment General requirements for proficiency testing (ISO/IEC 17043:2010) CEN EN ISO/IEC :2010 Conformity assessment Supplier's declaration of conformity Part 1: General requirements (ISO/IEC :2004, corrected version ) EN ISO/IEC : CEN EN ISO/IEC :2004 Conformity assessment Supplier's declaration of conformity Part 2: Supporting documentation (ISO/IEC :2004) CEN EN ISO/IEC 17065:2012 Conformity assessment Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) EN 45011: CEN EN ISO/IEC 17067:2013 Conformity assessment Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC 17067:2013) CEN EN ISO 19011:2011 Guidelines for auditing management systems (ISO 19011:2011) EN ISO 19011: CEN EN ISO 22870:2016 Point-of-care testing (POCT) Requirements for quality and competence (ISO 22870:2016) EN ISO 22870: ( 1 ) ESO: European standardisation organisation: CEN: Rue de la Science 23, 1040 Brussels, Belgium, Tel ; Fax ( CENELEC: Rue de la Science 23, 1040 Brussels, Belgium, Tel ; Fax ( ETSI: 650, route des Lucioles, Sophia Antipolis, France, Tel ; Fax ( Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal ( dow ), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. : The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

18 C 209/16 EN Official Journal of the European Union Note 3: NOTE: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 ( 1 ). Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. References to Corrigenda /AC:YYYY are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. More information about harmonised standards and other European standards on the Internet at ( 1 ) OJ C 338, , p. 31.

19 EN Official Journal of the European Union C 209/17 Commission communication in the framework of the implementation of Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment and repealing Council Directive 89/686/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/03) ESO ( 1 ) Reference and title of the standard (and reference document) Date of start of presumption of conformity Note 0 Reference of superseded standard Date of cessation of presumption of conformity of superseded standard Note 1 CEN EN 136:1998 Respiratory protective devices Full face masks Requirements, testing, marking EN 136:1998/AC:2003 CEN EN 137:2006 Respiratory protective devices Self-contained open-circuit compressed air breathing apparatus with full face mask Requirements, testing, marking CEN EN 140:1998 Respiratory protective devices Half masks and quarter masks Requirements, testing, marking EN 140:1998/AC:1999 CEN EN 142:2002 Respiratory protective devices Mouthpiece assemblies Requirements, testing, marking CEN EN 143:2000 Respiratory protective devices Particle filters Requirements, testing, marking EN 143:2000/AC:2005 EN 143:2000/A1:2006 Note 3 CEN EN 144-1:2000 Respiratory protective devices Gas cylinder valves Part 1: Thread connections for insert connector

20 C 209/18 EN Official Journal of the European Union EN 144-1:2000/A1:2003 Note 3 EN 144-1:2000/A2:2005 Note 3 CEN EN 144-2:1998 Respiratory protective devices Gas cylinder valves Part 2: Outlet connections CEN EN 144-3:2003 Respiratory protective devices Gas cylinder valves Part 3: Outlet connections for diving gases Nitrox and oxygen EN 144-3:2003/AC:2003 CEN EN 145:1997 Respiratory protective devices Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type Requirements, testing, marking EN 145:1997/A1:2000 Note 3 CEN EN 148-1:1999 Respiratory protective devices Threads for facepieces Part 1: Standard thread connection CEN EN 148-2:1999 Respiratory protective devices Threads for facepieces Part 2: Centre thread connection CEN EN 148-3:1999 Respiratory protective devices Threads for facepieces Part 3: Tread connection M 45 x 3 CEN EN 149:2001+A1:2009 Respiratory protective devices Filtering half masks to protect against particles Requirements, testing, marking CEN EN 166:2001 Personal eye-protection Specifications CEN EN 169:2002 Personal eye-protection Filters for welding and related techniques Transmittance requirements and recommended use CEN EN 170:2002 Personal eye-protection Ultraviolet filters Transmittance requirements and recommended use

21 EN Official Journal of the European Union C 209/19 CEN EN 172:1994 Personal eye protection Sunglare filters for industrial use EN 172:1994/A1:2000 Note 3 EN 172:1994/A2:2001 Note 3 CEN EN 174:2001 Personal eye-protection Ski goggles for downhill skiing CEN EN 175:1997 Personal protection Equipment for eye and face protection during welding and allied processes CEN EN 207:2017 Personal eye-protection equipment Filters and eye-protectors against laser radiation (laser eyeprotectors) CEN EN 208:2009 Personal eye-protection Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) CEN EN 250:2014 Respiratory equipment Open-circuit selfcontained compressed air diving apparatus Requirements, testing and marking CEN EN 342:2017 Protective clothing Ensembles and garments for protection against cold EN 342:2004 CEN EN 343:2003+A1:2007 Protective clothing Protection against rain EN 343:2003+A1:2007/AC:2009 CEN EN 352-1:2002 Hearing protectors General requirements Part 1: Ear-Muffs CEN EN 352-2:2002 Hearing protectors General requirements Part 2: Ear-plugs CEN EN 352-3:2002 Hearing protectors General requirements Part 3: Ear-muffs attached to an industrial safety helmet

22 C 209/20 EN Official Journal of the European Union CEN EN 352-4:2001 Hearing protectors Safety requirements and testing Part 4: Level-dependent ear-muffs EN 352-4:2001/A1:2005 Note 3 CEN EN 352-5:2002 Hearing protectors Safety requirements and testing Part 5: Active noise reduction earmuffs EN 352-5:2002/A1:2005 Note 3 CEN EN 352-6:2002 Hearing protectors Safety requirements and testing Part 6: Ear-muffs with electrical audio input CEN EN 352-7:2002 Hearing protectors Safety requirements and testing Part 7: Level-dependent ear-plugs CEN EN 352-8:2008 Hearing protectors Safety requirements and testing Part 8: Entertainment audio ear-muffs CEN EN 353-1:2014+A1:2017 Personal fall protection equipment Guided type fall arresters including an anchor line Part 1: Guided type fall arresters including a rigid anchor line EN 353-1:2014 CEN EN 353-2:2002 Personal protective equipment against falls from a height Part 2: Guided type fall arresters including a flexible anchor line CEN EN 354:2010 Personal fall protection equipment Lanyards CEN EN 355:2002 Personal protective equipment against falls from a height Energy absorbers

23 EN Official Journal of the European Union C 209/21 CEN EN 358:1999 Personal protective equipment for work positioning and prevention of falls from a height Belts for work positioning and restraint and work positioning lanyards CEN EN 360:2002 Personal protective equipment against falls from a height Retractable type fall arresters CEN EN 361:2002 Personal protective equipment against falls from a height Full body harnesses CEN EN 362:2004 Personal protective equipment against falls from a height Connectors CEN EN 365:2004 Personal protective equipment against falls from a height General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging EN 365:2004/AC:2006 CEN EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) CEN EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) CEN EN 379:2003+A1:2009 Personal eye-protection Automatic welding filters EN 379:2003 CEN EN 381-5:1995 Protective clothing for users of hand-held chain saws Part 5: Requirements for leg protectors CEN EN 381-7:1999 Protective clothing for users of hand-held chainsaws Part 7: Requirements for chainsaw protective gloves

24 C 209/22 EN Official Journal of the European Union CEN EN 381-9:1997 Protective clothing for users of hand-held chain saws Part 9: Requirements for chain saw protective gaiters CEN EN :2002 Protective clothing for users of hand-held chainsaws Part 11: Requirements for upper body protectors CEN EN 388:2016 Protective gloves against mechanical risks CEN EN 397:2012+A1:2012 Industrial safety helmets CEN EN 402:2003 Respiratory protective devices Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape Requirements, testing, marking CEN EN 403:2004 Respiratory protective devices for self-rescue Filtering devices with hood for escape from fire Requirements, testing, marking CEN EN 404:2005 Respiratory protective devices for self-rescue Filter self-rescuer from carbon monoxide with mouthpiece assembly CEN EN 405:2001+A1:2009 Respiratory protective devices Valved filtering half masks to protect against gases or gases and particles Requirements, testing, marking CEN EN 407:2004 Protective gloves against thermal risks (heat and/ or fire) CEN EN 420:2003+A1:2009 Protective gloves General requirements and test methods CEN EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination

25 EN Official Journal of the European Union C 209/23 CEN EN 443:2008 Helmets for fire fighting in buildings and other structures CEN EN 469:2005 Protective clothing for firefighters Performance requirements for protective clothing for firefighting activities EN 469:2005/A1:2006 Note 3 EN 469:2005/AC:2006 CEN EN 511:2006 Protective gloves against cold CEN EN 564:2014 Mountaineering equipment Accessory cord Safety requirements and test methods CEN EN 565:2017 Mountaineering equipment Tape Safety requirements and test methods EN 565:2006 CEN EN 566:2017 Mountaineering equipment Slings Safety requirements and test methods CEN EN 567:2013 Mountaineering equipment Rope clamps Safety requirements and test methods CEN EN 568:2015 Mountaineering equipment Ice anchors Safety requirements and test methods CEN EN 569:2007 Mountaineering equipment Pitons Safety requirements and test methods CEN EN 659:2003+A1:2008 Protective gloves for firefighters EN 659:2003+A1:2008/AC:2009 CEN EN 795:2012 Personal fall protection equipment Anchor devices

26 C 209/24 EN Official Journal of the European Union Warning: This publication does not concern the equipment described in: type A (anchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure) referred to in clauses 3.2.1, 4.4.1, 5.3; type C (anchor devices employing horizontal flexible anchor lines) referred to in clauses 3.2.3, and 5.5; type D (anchor devices employing horizontal rigid anchor lines) referred to in clauses 3.2.4, and 5.6; any combination of the above. In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA. Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Regulation (EU) 2016/425 because they are not considered to be PPE. CEN EN 812:2012 Industrial bump caps CEN EN 813:2008 Personal fall protection equipment Sit harnesses CEN EN 943-1:2015 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits CEN EN 958:2017 Mountaineering equipment Energy absorbing systems for use in klettersteig (via ferrata) climbing Safety requirements and test methods CEN EN 966:2012+A1:2012 Helmets for airborne sports CEN EN :2002 Protective clothing against radioactive contamination Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination CEN EN 1077:2007 Helmets for alpine skiers and snowboarders CEN EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates

27 EN Official Journal of the European Union C 209/25 CEN EN 1080:2013 Impact protection helmets for young children CEN EN :1996 Protective clothing Gloves and arm guards protecting against cuts and stabs by hand knives Part 1: Chain mail gloves and arm guards CEN EN :2000 Protective clothing Gloves and arm guards protecting against cuts and stabs by hand knives Part 2: Gloves and arm guards made of material other than chain mail CEN EN 1146:2005 Respiratory protective devices Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape Requirements, testing, marking CEN EN :2008 Protective clothing Electrostatic properties Part 5: Material performance and design requirements CEN EN 1150:1999 Protective clothing Visibility clothing for nonprofessional use Test methods and requirements CEN EN 1385:2012 Helmets for canoeing and white water sports CEN EN 1486:2007 Protective clothing for fire-fighters Test methods and requirements for reflective clothing for specialised fire-fighting CEN EN 1497:2007 Personal fall protection equipment Rescue harnesses CEN EN 1731:2006 Personal eye protection Mesh eye and face protectors CEN EN 1827:1999+A1:2009 Respiratory protective devices Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only Requirements, testing, marking

28 C 209/26 EN Official Journal of the European Union CEN EN 1891:1998 Personal protective equipment for the prevention of falls from a height Low stretch kernmantel ropes CEN EN 1938:2010 Personal eye protection Goggles for motorcycle and moped users CEN EN ISO 10819:2013 Mechanical vibration and shock Hand-arm vibration Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) CEN EN ISO 10862:2009 Small craft Quick release system for trapeze harness (ISO 10862:2009) CEN EN 12021:2014 Respiratory equipment Compressed gases for breathing apparatus CEN EN 12083:1998 Respiratory protective devices Filters with breathing hoses, (Non-mask mounted filters) Particle filters, gas filters, and combined filters Requirements, testing, marking EN 12083:1998/AC:2000 CEN EN 12270:2013 Mountaineering equipment Chocks Safety requirements and test methods CEN EN 12275:2013 Mountaineering equipment Connectors Safety requirements and test methods CEN EN 12276:2013 Mountaineering equipment Frictional anchors Safety requirements and test methods CEN EN 12277:2015 Mountaineering equipment Harnesses Safety requirements and test methods

29 EN Official Journal of the European Union C 209/27 CEN EN 12278:2007 Montaineering equipment Pulleys Safety requirements and test methods CEN EN ISO :2013 Eye and face protection Sunglasses and related eyewear Part 1: Sunglasses for general use (ISO :2013) EN ISO :2013/A1:2015 Note 3 CEN EN ISO :2015 Eye and face protection Sunglasses and related eyewear Part 2: Filters for direct observation of the sun (ISO :2015) CEN EN ISO 12401:2009 Small craft Deck safety harness and safety line Safety requirements and test methods (ISO 12401:2009) CEN EN ISO :2006 Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements (ISO :2006) EN ISO :2006/AC:2006 EN ISO :2006/A1:2010 Note 3 CEN EN ISO :2006 Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods (ISO :2006) EN ISO :2006/A1:2010 Note 3 CEN EN ISO :2006 Personal flotation devices Part 8: Accessories Safety requirements and test methods (ISO :2006) EN ISO :2006/A1:2011 Note 3 CEN EN 12477:2001 Protective gloves for welders EN 12477:2001/A1:2005 Note 3

30 C 209/28 EN Official Journal of the European Union CEN EN 12492:2012 Mountaineering equipment Helmets for mountaineers Safety requirements and test methods CEN EN 12841:2006 Personal fall protection equipment Rope access systems Rope adjustment devices CEN EN 12941:1998 Respiratory protective devices Powered filtering devices incorporating a helmet or a hood Requirements, testing, marking EN 12941:1998/A1:2003 Note 3 EN 12941:1998/A2:2008 Note 3 CEN EN 12942:1998 Respiratory protective devices Power assisted filtering devices incorporating full face masks, half masks or quarter masks Requirements, testing, marking EN 12942:1998/A1:2002 Note 3 EN 12942:1998/A2:2008 Note 3 CEN EN 13034:2005+A1:2009 Protective clothing against liquid chemicals Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) CEN EN 13061:2009 Protective clothing Shin guards for association football players Requirements and test methods CEN EN 13158:2018 Protective clothing Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers Requirements and test methods This is the first publication EN 13158:

31 EN Official Journal of the European Union C 209/29 CEN EN 13178:2000 Personal eye-protection Eye protectors for snowmobile users CEN EN :2000 Protective equipment for martial arts Part 1: General requirements and test methods CEN EN :2000 Protective equipment for martial arts Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors CEN EN :2013 Protective equipment for martial arts Part 3: Additional requirements and test methods for trunk protectors CEN EN :2001 Protective equipment for martial arts Part 4: Additional requirements and test methods for head protectors EN :2001/A1:2007 Note 3 CEN EN :2002 Protective equipment for martial arts Part 5: Additional requirements and test methods for genital protectors and abdominal protectors CEN EN :2003 Protective equipment for martial arts Part 6: Additional requirements and test methods for breast protectors for females CEN EN :2009 Protective equipment for martial arts Part 7: Additional requirements and test methods for hand and foot protectors CEN EN :2017 Protective equipment for martial arts Part 8: Additional requirements and test methods for karate face protectors

32 C 209/30 EN Official Journal of the European Union CEN EN 13356:2001 Visibility accessories for non-professional use Test methods and requirements CEN EN 13484:2012 Helmets for users of luges CEN EN 13546:2002+A1:2007 Protective clothing Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players Requirements and test methods CEN EN 13567:2002+A1:2007 Protective clothing Hand, arm, chest, abdomen, leg, genital and face protectors for fencers Requirements and test methods CEN EN 13594:2015 Protective gloves for motorcycle riders Requirements and test methods CEN EN :2002 Protective clothing for professional motorcycle riders Jackets, trousers and one piece or divided suits Part 1: General requirements CEN EN :2002 Protective clothing for professional motorcycle riders Jackets, trousers and one-piece or divided suits Part 3: Test method for determination of burst strength CEN EN 13634:2017 Protective footwear for motorcycle riders Requirements and test methods CEN EN ISO 13688:2013 Protective clothing General requirements (ISO 13688:2013) CEN EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs CEN EN 13794:2002 Respiratory protective devices Self-contained closed-circuit breathing apparatus for escape Requirements, testing, marking

33 EN Official Journal of the European Union C 209/31 CEN EN :2006 Footwear protecting against chemicals Part 2: Requirements for footwear resistant to chemicals under laboratory conditions CEN EN :2006 Footwear protecting against chemicals Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions CEN EN 13949:2003 Respiratory equipment Open-circuit selfcontained diving apparatus for use with compressed Nitrox and oxygen Requirements, testing, marking CEN EN ISO :2004 Protective clothing for use against solid particulates Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO :2004) EN ISO :2004/A1:2010 Note 3 CEN EN ISO 13998:2003 Protective clothing Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) CEN EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris Requirements and test methods CEN EN 14052:2012+A1:2012 High performance industrial helmets EN 14052:2012 CEN EN 14058:2017 Protective clothing Garments for protection against cool environments EN 14058:2004 CEN EN 14120:2003+A1:2007 Protective clothing Wrist, palm, knee and elbow protectors for users of roller sports equipment Requirements and test methods

34 C 209/32 EN Official Journal of the European Union CEN EN 14126:2003 Protective clothing Performance requirements and tests methods for protective clothing against infective agents EN 14126:2003/AC:2004 CEN EN 14143:2013 Respiratory equipment Self-contained rebreathing diving apparatus CEN EN :2017 Diving suits Part 1: Wet suits Requirements and test methods EN :2005 CEN EN :2017 Diving suits Part 2: Dry suits Requirements and test methods EN :2005 CEN EN :2017 Diving suits Part 3: Actively heated or cooled suit systems and components Requirements and test methods EN :2005 CEN EN 14328:2005 Protective clothing Gloves and armguards protecting against cuts by powered knives Requirements and test methods CEN EN 14387:2004+A1:2008 Respiratory protective devices Gas filter(s) and combined filter(s) Requirements, testing, marking CEN EN 14435:2004 Respiratory protective devices Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only Requirements, testing, marking CEN EN ISO 14460:1999 Protective clothing for automobile racing drivers Protection against heat and flame Performance requirements and test methods (ISO 14460:1999)

35 EN Official Journal of the European Union C 209/33 EN ISO 14460:1999/A1:2002 Note 3 EN ISO 14460:1999/AC:1999 CEN EN 14529:2005 Respiratory protective devices Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only CEN EN :2005 Respiratory protective devices Compressed air line breathing apparatus with demand valve Part 1: Apparatus with a full face mask Requirements, testing, marking CEN EN 14594:2005 Respiratory protective devices Continuous flow compressed air line breathing apparatus Requirements, testing, marking EN 14594:2005/AC:2005 CEN EN 14605:2005+A1:2009 Protective clothing against liquid chemicals performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) CEN EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) CEN EN ISO :2012 Immersion suits Part 1: Constant wear suits, requirements including safety (ISO :2012) CEN EN ISO :2012 Immersion suits Part 2: Abandonment suits, requirements including safety (ISO :2012)

36 C 209/34 EN Official Journal of the European Union CEN EN 15090:2012 Footwear for firefighters CEN EN :2012 Mountaineering equipment Braking devices Part 1: Braking devices with manually assisted locking, safety requirements and test methods CEN EN :2008 Respiratory equipment Open-circuit umbilical supplied compressed gas diving apparatus Part 1: Demand apparatus EN :2008/AC:2009 CEN EN :2009 Respiratory equipment Open-circuit umbilical supplied compressed gas diving apparatus Part 2: Free flow apparatus CEN EN 15613:2008 Knee and elbow protectors for indoor sports Safety requirements and test methods CEN EN 16027:2011 Protective clothing Gloves with protective effect for association football goal keepers CEN EN 16350:2014 Protective gloves Electrostatic properties CEN EN 16473:2014 Firefighters helmets Helmets for technical rescue CEN EN 16716:2017 Mountaineering equipment Avalanche airbag systems Safety requirements and test methods CEN EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) EN ISO 17249:2013/AC:2014 CEN EN ISO 20345:2011 Personal protective equipment Safety footwear (ISO 20345:2011)

37 EN Official Journal of the European Union C 209/35 CEN EN ISO 20346:2014 Personal protective equipment Protective footwear (ISO 20346:2014) CEN EN ISO 20347:2012 Personal protective equipment Occupational footwear (ISO 20347:2012) CEN EN ISO 20471:2013 High visibility clothing Test methods and requirements (ISO 20471:2013, Corrected version ) EN ISO 20471:2013/A1:2016 Note 3 CEN EN ISO 27065:2017 Protective clothing Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017) Cenelec EN :2018 Live working Footwear for electrical protection Insulating footwear and overboots This is the first publication ( 1 ) ESO: European standardisation organisation: CEN: Rue de la Science 23, 1040 Brussels, Belgium, Tel ; Fax: ( CENELEC: Rue de la Science 23, 1040 Brussels, Belgium, Tel ; Fax: ( ETSI: 650, route des Lucioles, Sophia Antipolis, France, Tel ; Fax ( Note 0: This is the date from which compliance with the harmonised standard or parts thereof confers a presumption of conformity with the relevant requirements of Union legislation Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal ( dow ), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. : The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment.

38 C 209/36 EN Official Journal of the European Union NOTE: Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 ( 1 ). Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. References to Corrigenda /AC:YYYY are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. More information about harmonised standards and other European standards on the Internet at ( 1 ) OJ C 338, , p. 31.

39 EN Official Journal of the European Union C 209/37 Commission communication in the framework of the implementation of Directive 2014/35/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/04) ESO ( 1 ) Reference and title of the standard (and reference document) First publication OJ Reference of superseded standard Date of cessation of presumption of conformity of superseded standard Note 1 CEN EN 13637:2015 Building hardware Electrically controlled exit systems for use on escape routes Requirements and test methods Cenelec HD 308 S2:2001 Identification of cores in cables and flexible cords Cenelec HD 361 S3:1999 System for cable designation HD 361 S3:1999/A1:2006 Note 3 HD 361 S3:1999/AC:1999 Cenelec HD 368 S1:1978 Direct acting recording electrical measuring instruments and their accessories IEC 60258: A1:1976 Cenelec HD 549 S1:1989 Conference systems Electrical and audio requirements IEC 60914:1988 Cenelec HD 603 S1:1994 Distribution cables of rated voltage 0,6/1 kv HD 603 S1:1994/A1:1997 HD 603 S1:1994/A2:2003 HD 603 S1:1994/A3:2007 Note 3 Cenelec HD 604 S1:1994 0,6/1 kv and 1,9/3,3 kv power cables with special fire performance for use in power stations

40 C 209/38 EN Official Journal of the European Union HD 604 S1:1994/A1:1997 HD 604 S1:1994/A2:2002 HD 604 S1:1994/A3:2005 Note 3 Cenelec HD 605 S2:2008 Electric cables Additional test methods HD 605 S2:2008/AC:2010 Cenelec HD 626 S1:1996 Overhead distribution cables of rated voltage Uo/ U(Um): 0,6/1 (1,2) kv HD 626 S1:1996/A1:1997 HD 626 S1:1996/A2:2002 Note 3 Cenelec HD 627 S1:1996 Multicore and multipair cables for installation above and below ground HD 627 S1:1996/A1:2000 HD 627 S1:1996/A2:2005 Note 3 Cenelec HD 639 S1:2002 Electrical accessories Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) IEC 61540:1997 (Modified) + A1:1998 (Modified) HD 639 S1:2002/A1:2003 HD 639 S1:2002/A2:2010 Note 3 HD 639 S1:2002/AC:2003 Cenelec EN 41003:2008 Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system Cenelec EN :2001 Signalling on low-voltage electrical installations in the frequency range 3 khz to 148,5 khz and 1,6 MHz to 30 MHz Part 4-2: Low voltage decoupling filters Safety requirements

41 EN Official Journal of the European Union C 209/39 EN :2001/A1:2003 EN :2001/A2:2005 Note 3 Cenelec EN :2005 Signalling on low-voltage electrical installations in the frequency range 3 khz to 148,5 khz and 1,6 MHz to 30 MHz Part 4-7: Portable low voltage decoupling filters Safety requirements EN :2005/AC:2006 Cenelec EN :2005 Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements EN :2005/A1:2013 Note 3 Cenelec EN :2006 Cable trunking systems and cable ducting systems for electrical installations Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings EN :2006/A1:2011 Note 3 Cenelec EN :2008 Cable trunking systems and cable ducting systems for electrical installations Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor Cenelec EN :2010 Cable trunking systems and cable ducting systems for electrical installations Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets Cenelec EN :2009 Cable trunking systems and cable ducting systems for electrical installations Part 2-4: Particular requirements for service poles and service posts Cenelec EN 50106:2008 Safety of household and similar electrical appliances Particular rules for routine tests referring to appliances under the scope of EN

42 C 209/40 EN Official Journal of the European Union Cenelec EN :2002 Coaxial cables Part 1: Generic specification EN :2002/A1:2006 EN :2002/A2:2013 Note 3 Cenelec EN :2005 Coaxial cables Part 2-1: Sectional specification for cables used in cabled distribution networks Indoor drop cables for systems operating at 5 MHz MHz EN :2005/A1:2008 EN :2005/A2:2013 Note 3 Cenelec EN :2004 Coaxial cables Part 2-2: Sectional specification for cables used in cabled distribution networks Outdoor drop cables for systems operating at 5 MHz MHz EN :2004/A1:2008 EN :2004/A2:2013 Note 3 Cenelec EN :2004 Coaxial cables Part 2-3: Sectional specification for cables used in cabled distribution networks Distribution and trunk cables for systems operating at 5 MHz MHz EN :2004/A1:2008 EN :2004/A2:2013 Note 3 Cenelec EN :2004 Coaxial cables Part 2-4: Sectional specification for cables used in cabled distribution networks Indoor drop cables for systems operating at 5 MHz MHz EN :2004/A1:2008 EN :2004/A2:2013 Note 3

43 EN Official Journal of the European Union C 209/41 Cenelec EN :2004 Coaxial cables Part 2-5: Sectional specification for cables used in cabled distribution networks Outdoor drop cables for systems operating at 5 MHz MHz EN :2004/A1:2008 EN :2004/A2:2013 Note 3 EN :2004/AC:2012 Cenelec EN :2002 Coaxial cables Part 3-1: Sectional specifications for cables used in Telecom applications Miniaturized cables used in digital communication systems Cenelec EN :2008 Coaxial cables Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN Indoor drop cables for systems operating at 5 MHz MHz EN :2008/A1:2013 Note 3 Cenelec EN :2015 Coaxial cables Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks Cenelec EN :2015 Electrical equipment for furnaces and ancillary equipment Part 1: Requirements for application design and installation Cenelec EN :2015 Electrical equipment for furnaces and ancillary equipment Part 2: Requirements for design, development and type approval of safety devices and subsystems Cenelec EN 50178:1997 Electronic equipment for use in power installations

44 C 209/42 EN Official Journal of the European Union Cenelec EN 50214:2006 Flat polyvinyl chloride sheathed flexible cables EN 50214:2006/AC:2007 Cenelec EN 50250:2002 Conversion adaptors for industrial use EN 50250:2002/A1:2015 Note EN 50250:2002/AC:2007 Cenelec EN 50274:2002 Low-voltage switchgear and controlgear assemblies Protection against electric shock Protection against unintentional direct contact with hazardous live parts EN 50274:2002/AC:2009 Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 1: Generic specification Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 2-1: Sectional specification for screened cables characterised up to 100 MHz Horizontal and building backbone cables Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 2-2: Sectional specification for screened cables characterised up to 100 MHz Work area and patch cord cables Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz Horizontal and building backbone cables

45 EN Official Journal of the European Union C 209/43 Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz Work area and patch cord cables Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 4-1: Sectional specification for screened cables characterised up to 600 MHz Horizontal and building backbone cables Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 4-2: Sectional specification for screened cables characterised up to 600 MHz Work area and patch cord cables Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 5-1: Sectional specification for screened cables characterized up to 250 MHz Horizontal and building backbone cables Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 5-2: Sectional specification for screened cables characterized up to 250 MHz Work area and patch cord cables Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz Horizontal and building backbone cables Cenelec EN :2013 Multi-element metallic cables used in analogue and digital communication and control Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz Work area and patch cord cables

46 C 209/44 EN Official Journal of the European Union Cenelec EN :2005 Multi-element metallic cables used in analogue and digital communication and control Part 7: Sectional specification for instrumentation and control cables Cenelec EN :2012 Multi-element metallic cables used in analogue and digital communication and control Part 8: Specification for type 1 cables characterised up to 2 MHz Cenelec EN :2012 Multi-element metallic cables used in analogue and digital communication and control Part 9-1: Sectional specification for screened cables characterised up to MHz Horizontal and building backbone cables Cenelec EN :2015 Multi-element metallic cables used in analogue and digital communication and control Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to MHz for work area, patch cord and data centre applications Cenelec EN :2012 Multi-element metallic cables used in analogue and digital communication and control Part 10-1: Sectional specification for screened cables characterized up to 500 MHz Horizontal floor and building backbone cables Cenelec EN :2015 Multi-element metallic cables used in analogue and digital communication and control Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications Cenelec EN :2012 Multi-element metallic cables used in analogue and digital communication and control Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz Horizontal and building backbone cables

47 EN Official Journal of the European Union C 209/45 Cenelec EN :2015 Multi-element metallic cables used in analogue and digital communication and control Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications Cenelec EN :2001 Communication cables Specifications for test methods Part 1-3: Electrical test methods Dielectric strength Cenelec EN :2001 Communication cables Specifications for test methods Part 1-4: Electrical test methods Insulation resistance Cenelec EN :2005 Communication cables Part 2-1: Common design rules and construction Cenelec EN :2001 Communication cables Part 2-20: Common design rules and construction General Cenelec EN :2001 Communication cables Part 2-21: Common design rules and construction PVC insulation compounds EN :2001/A1:2007 Note 3 EN :2001/A1:2007/AC:2016 EN :2001/AC:2003 Cenelec EN :2001 Communication cables Part 2-22: Common design rules and construction PVC sheathing compounds EN :2001/A1:2007 Note 3 Cenelec EN :2013 Communication cables Part 2-23: Common design rules and construction Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables EN :

48 C 209/46 EN Official Journal of the European Union Cenelec EN :2002 Communication cables Part 2-24: Common design rules and construction PE sheathing EN :2002/A1:2008 Note 3 Cenelec EN :2013 Communication cables Part 2-25: Common design rules and construction Polypropylene insulation compounds EN : Cenelec EN :2002 Communication cables Part 2-26: Common design rules and construction Halogen free flame retardant insulation compounds EN :2002/A1:2007 Note 3 Cenelec EN :2002 Communication cables Part 2-27: Common design rules and construction Halogen free flame retardant thermoplastic sheathing compounds EN :2002/A1:2007 Note 3 EN :2002/A1:2007/AC:2010 Cenelec EN :2002 Communication cables Part 2-28: Common design rules and construction Filling compounds for filled cables Cenelec EN :2002 Communication cables Part 2-29: Common design rules and construction Cross-linked PE insulation compounds Cenelec EN :2002 Communication cables Part 2-30: Common design rules and construction Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing Cenelec EN :2014 Communication cables Part 4-1: General considerations for the use of cables Environmental conditions and safety aspects EN :

49 EN Official Journal of the European Union C 209/47 Cenelec EN :2014 Communication cables Part 4-2: General considerations for the use of cables Guide to use Cenelec EN :2011 Insulating, sheathing and covering materials for low-voltage energy cables Part 0: General introduction Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 1: Cross-linked elastomeric insulating compounds Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 2-1: Crosslinked elastomeric sheathing compounds EN :2005/A1:2011 Note 3 Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 2-2: Crosslinked elastomeric covering compounds Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 3: PVC insulating compounds EN :2005/A1:2011 Note 3 Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 4-1: PVC sheathing compounds Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 4-2: PVC covering compounds

50 C 209/48 EN Official Journal of the European Union Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 5: Halogen-free, cross-linked insulating compounds EN :2005/A1:2011 Note 3 Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 6: Halogen-free, cross-linked sheathing compounds EN :2005/A1:2011 Note 3 Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 7: Halogen-free, thermoplastic insulating compounds Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 8: Halogen-free, thermoplastic sheathing compounds EN :2005/A1:2011 Note 3 Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 9-1: Miscellaneous insulating compounds Cross-linked polyvinyl chloride (XLPVC) Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 10-1: Miscellaneous sheathing compounds Cross-linked polyvinyl chloride (XLPVC) Cenelec EN :2005 Insulating, sheathing and covering materials for low voltage energy cables Part 10-2: Miscellaneous sheathing compounds Thermoplastic polyurethane Cenelec EN 50364:2010 Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications

51 EN Official Journal of the European Union C 209/49 Cenelec EN 50369:2005 Liquid tight sheathing systems for cable management Cenelec EN 50395:2005 Electrical test methods for low voltage energy cables EN 50395:2005/A1:2011 Note 3 Cenelec EN 50396:2005 Non electrical test methods for low voltage energy cables EN 50396:2005/A1:2011 Note 3 Cenelec EN :2004 End user multi-pair cables used in high bit rate telecommunication networks Part 1: Aerial cables Cenelec EN :2004 End user multi-pair cables used in high bit rate telecommunication networks Part 2: Duct and buried cables Cenelec EN :2004 Multi-pair cables used in high bit rate digital access telecommunication networks Part 1: Outdoor cables Cenelec EN :2014 Multi-pair cables used in high bit rate digital access telecommunications networks Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xdsl and applications up to 100 Mbit/s over IP Cenelec EN 50428:2005 Switches for household and similar fixed electrical installations Collateral standard Switches and related accessories for use in home and building electronic systems (HBES) EN 50428:2005/A1:2007 EN 50428:2005/A2:2009 Note 3

52 C 209/50 EN Official Journal of the European Union Cenelec EN :2012 Cables for indoor residential telecommunication installations Part 1: Unscreened cables Grade 1 Cenelec EN :2012 Cables for indoor residential telecommunication installations Part 2: Screened cables Grade 1 Cenelec EN :2006 Cables for indoor residential telecommunication installations Part 3: Screened cables Grade 3 Cenelec EN :2012 Cables for indoor residential telecommunication installations Part 4: Cables up to MHz Grade 3 Cenelec EN 50445:2008 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz 300 GHz) Cenelec EN :2009 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 3: Electrical safety requirements Cenelec EN :2012 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Cenelec EN :2014 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 6-1: HBES installations Installation and planning

53 EN Official Journal of the European Union C 209/51 Cenelec EN 50497:2007 Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables Cenelec EN 50520:2009 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 1: General requirements Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) Part 2-11: Cables for general applications Flexible cables with thermoplastic PVC insulation Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) Part 2-12: Cables for general applications Cables with thermoplastic PVC insulation for extensible leads Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) Part 2-21: Cables for general applications Flexible cables with crosslinked elastomeric insulation EN :2011/AC:2013 Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-22: Cables for general applications High flexibility braided cables with crosslinked elastomeric insulation Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-31: Cables for general applications Single core non-sheathed cables with thermoplastic PVC insulation

54 C 209/52 EN Official Journal of the European Union Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-41: Cables for general applications Single core cables with crosslinked silicone rubber insulation Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-42: Cables for general applications Single core non-sheathed cables with crosslinked EVA insulation Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-51: Cables for general applications Oil resistant control cables with thermoplastic PVC insulation Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-71: Cables for general applications Flat tinsel cables (cords) with thermoplastic PVC insulation Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-72: Cables for general applications Flat divisible cables (cords) with thermoplastic PVC insulation Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-81: Cables for general applications Cables with crosslinked elastomeric covering for arc welding Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-82: Cables for general applications Cables with crosslinked elastomeric insulation for decorative chains

55 EN Official Journal of the European Union C 209/53 Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-83: Cables for general applications Multicore cables with crosslinked silicone rubber insulation Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 3-11: Cables with special fire performance Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 3-21: Cables with special fire performance Flexible cables with halogen-free crosslinked insulation, and low emission of smoke EN :2011/AC:2013 Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 3-31: Cables with special fire performance Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke Cenelec EN :2011 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 3-41: Cables with special fire performance Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke Cenelec EN :2013 Low-voltage surge protective devices Surge protective devices for specific application including d.c. Part 11: Requirements and tests for SPDs in photovoltaic applications EN :2013/A1:2014 Note

56 C 209/54 EN Official Journal of the European Union Cenelec EN 50550:2011 Power frequency overvoltage protective device for household and similar applications (POP) EN 50550:2011/A1:2014 Note EN 50550:2011/AC:2012 Cenelec EN 50556:2011 Road traffic signal systems Cenelec EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-rcbos-rccbs for household and similar uses Cenelec EN :2014 Electric cables Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) Part 1: General guidance HD 516 S2: A1: A2: Cenelec EN :2014 Electric cables Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) Part 2: Specific guidance related to EN cable types HD 516 S2: A1: A2: Cenelec EN 50615:2015 Safety Particular requirements for devices for fire prevention and suppression for electric hobs (cooktops) Cenelec EN 50618:2014 Electric cables for photovoltaic systems Cenelec EN :2010 Rotating electrical machines Part 1: Rating and performance IEC :2010 (Modified) EN :2010/AC:2010 Cenelec EN :2001 Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) Classification IEC :2000

57 EN Official Journal of the European Union C 209/55 EN :2001/A1:2007 IEC :2000/A1:2006 Note 3 Cenelec EN :1993 Rotating electrical machines Part 6: Methods of cooling (IC Code) IEC :1991 Cenelec EN :1993 Rotating electrical machines Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) IEC :1992 EN :1993/A1:2001 IEC :1992/A1:2000 Note 3 Cenelec EN :2007 Rotating electrical machines Part 8: Terminal markings and direction of rotation IEC :2007 EN :2007/A1:2014 IEC :2007/A1:2014 Note Cenelec EN :2005 Rotating electrical machines Part 9: Noise limits IEC :2003 (Modified) EN :2005/A1:2007 IEC :2003/A1:2007 Note 3 Cenelec EN :2004 Rotating electrical machines Part 11: Thermal protection IEC :2004 Cenelec EN :2002 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors IEC :2002 EN :2002/A1:2007 IEC :2002/A1:2007 Note 3 Cenelec EN :2004 Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher Measurement, evaluation and limits of vibration severity IEC :2003

58 C 209/56 EN Official Journal of the European Union EN :2004/A1:2007 IEC :2003/A1:2007 Note 3 Cenelec EN :1989 Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters IEC :1984 Cenelec EN :1989 Direct acting indicating analogue electrical measuring instruments and their accessories Part 3: Special requirements for wattmeters and varmeters IEC :1984 EN :1989/A1:1995 IEC :1984/A1:1994 Note 3 Cenelec EN :1989 Direct acting indicating analogue electrical measuring instruments and their accessories Part 4: Special requirements for frequency meters IEC :1984 Cenelec EN :1989 Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters, power factor meters and synchroscopes IEC :1985 Cenelec EN :1989 Direct acting indicating analogue electrical measuring instruments and their accessories Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters IEC :1984 Cenelec EN :1989 Direct acting indicating analogue electrical measuring instruments and their accessories Part 7: Special requirements for multi-function instruments IEC :1984 Cenelec EN :1989 Direct acting indicating analogue electrical measuring instruments and their accessories Part 8: Special requirements for accessories IEC :1984

59 EN Official Journal of the European Union C 209/57 Cenelec EN :1989 Direct acting indicating analogue electrical-measuring instruments and their accessories Part 9: Recommended test methods IEC :1988 EN :1989/A1:1995 IEC :1988/A1:1994 EN :1989/A2:1995 IEC :1988/A2:1995 Note 3 Cenelec EN :1998 Power capacitors for induction heating installations Part 1: General IEC :1998 Cenelec EN :2006 Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links IEC :2006 EN :2006/A1:2011 IEC :2006/A1:2011 EN :2006/A2:2015 IEC :2006/A2:2015 Note Cenelec EN :2014 Miniature fuses Part 2: Cartridge fuse-links IEC :2014 EN : A1: A2: Cenelec EN :2005 Miniature fuses Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount types IEC :2005 EN :2005/A1:2009 IEC :2005/A1:2008 EN :2005/A2:2013 IEC :2005/A2:2012 Note 3

60 C 209/58 EN Official Journal of the European Union Cenelec EN :2014 Miniature fuses Part 6: Fuse-holders for miniature fuse-links IEC :2014 EN : A1: A2: Cenelec EN :2016 Miniature fuses Part 7: Miniature fuse-links for special applications IEC :2015 Cenelec EN :2013 Series capacitors for power systems Part 2: Protective equipment for series capacitor banks IEC :2012 Cenelec EN 60155:1995 Glow-starters for fluorescent lamps IEC 60155:1993 EN 60155:1995/A1:1995 IEC 60155:1993/A1:1995 EN 60155:1995/A2:2007 IEC 60155:1993/A2:2006 Note 3 Cenelec EN :2006 Safety of machinery Electrical equipment of machines Part 1: General requirements IEC :2005 (Modified) EN :2006/A1:2009 IEC :2005/A1:2008 Note 3 EN :2006/AC:2010 Cenelec EN :2008 Safety of machinery Electrical equipment of machines Part 32: Requirements for hoisting machines IEC :2008 Cenelec EN 60215:1989 Safety requirements for radio transmitting equipment IEC 60215:1987 EN 60215:1989/A1:1992 IEC 60215:1987/A1:1990

61 EN Official Journal of the European Union C 209/59 EN 60215:1989/A2:1994 IEC 60215:1987/A2:1993 Note 3 Cenelec EN 60228:2005 Conductors of insulated cables IEC 60228:2004 EN 60228:2005/AC:2005 Cenelec EN 60238:2004 Edison screw lampholders IEC 60238:2004 EN 60238:2004/A1:2008 IEC 60238:2004/A1:2008 EN 60238:2004/A2:2011 IEC 60238:2004/A2:2011 Note 3 EN 60238:2004/AC:2005 Cenelec EN :2011 AC motor capacitors Part 1: General Performance, testing and rating Safety requirements Guidance for installation and operation IEC :2010 EN :2011/A1:2013 IEC :2010/A1:2013 Note Cenelec EN :2011 AC motor capacitors Part 2: Motor start capacitors IEC :2010 EN :2011/A1:2013 IEC :2010/A1:2013 Note Cenelec EN :2014 Measuring relays and protection equipment Part 27: Product safety requirements IEC :2013 EN :2001 EN : Cenelec EN :2007 Low-voltage fuses Part 1: General requirements IEC :2006 EN :2007/A1:2009 IEC :2006/A1:2009

62 C 209/60 EN Official Journal of the European Union EN :2007/A2:2014 IEC :2006/A2:2014 Note Cenelec HD :2013 Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) Examples of standardized systems of fuses A to K IEC :2013 (Modified) HD : Cenelec HD :2010 Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) Examples of standardized systems of fuses A to F IEC :2010 (Modified) HD :2010/A1:2013 IEC :2010/A1:2013 Note 3 Cenelec EN :2009 Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices IEC :2009 EN :2009/A1:2012 IEC :2009/A1:2012 Cenelec EN :2011 Low-voltage fuses Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems IEC 60 IEC :2010 Cenelec EN :1999 Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements IEC :1999 EN :1999/A1:2007 IEC :1999/A1:2005 (Modified) EN :1999/A2:2012 IEC :1999/A2:2012 Note 3

63 EN Official Journal of the European Union C 209/61 EN :1999/A1:2007/AC:2014 Cenelec EN :1999 Plugs, socket-outlets and couplers for industrial purposes Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories IEC :1999 EN :1999/A1:2007 IEC :1999/A1:2005 (Modified) EN :1999/A2:2012 IEC :1999/A2:2012 Note 3 Cenelec EN :2007 Plugs, socket-outlets and couplers for industrial purposes Part 4: Switched socket-outlets and connectors with or without interlock IEC :2006 (Modified) EN :2007/A1:2012 IEC :2006/A1:2012 Note 3 Cenelec EN :2001 Appliance couplers for household and similar general purposes Part 1: General requirements IEC :2001 EN :2001/A1:2007 IEC :2001/A1:2007 Note 3 Cenelec EN :2000 Appliance couplers for household and similar general purposes Part 2-1: Sewing machine couplers IEC :2000 Cenelec EN :1998 Appliance couplers for household and similar general purposes Part 2-2: Interconnection couplers for household and similar equipment IEC :1998 Cenelec EN :2006 Appliance couplers for household and similar general purposes Part 2-4: Appliance couplers dependent on appliance weight for engagement IEC :2005 EN :2006/A1:2009 IEC :2005/A1:2009 Note 3

64 C 209/62 EN Official Journal of the European Union Cenelec EN :2004 Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable Apparatus IEC :2004 EN :2004/A1:2015 IEC :2004/A1:2015 Note Cenelec EN :2004 Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kw pre-mixed flame IEC :2004 EN :2004/A1:2015 IEC :2004/A1:2015 Note Cenelec EN :2004 Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable Procedure for determination of flaming droplets/ particles IEC :2004 Cenelec EN :2004 Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable Apparatus IEC :2004 Cenelec EN :2004 Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable Procedure for diffusion flame IEC :2004 Cenelec EN :2009 Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables Apparatus IEC : A1:2008

65 EN Official Journal of the European Union C 209/63 Cenelec EN :2009 Tests on electric and optical fibre cables under fire conditions Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables Category A F/R IEC :2000 (Modified) Cenelec EN :2009 Tests on electric and optical fibre cables under fire conditions Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables Category A IEC : A1:2008 Cenelec EN :2009 Tests on electric and optical fibre cables under fire conditions Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables Category B IEC : A1:2008 Cenelec EN :2009 Tests on electric and optical fibre cables under fire conditions Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables Category C IEC : A1:2008 Cenelec EN :2009 Tests on electric and optical fibre cables under fire conditions Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables Category D IEC : A1:2008 Cenelec EN :2012 Safety Part 1: General requirements IEC :2010 (Modified) EN :2012/A11:2014 Note 3 EN :2012/AC:2014 Cenelec EN :2010 Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances IEC :2009

66 C 209/64 EN Official Journal of the European Union EN :2010/A1:2013 IEC :2009/A1:2012 EN :2010/A11:2012 Note 3 Cenelec EN :2016 Safety Part 2-3: Particular requirements for electric irons IEC :2012 (Modified) EN : A11: A1: A2: Cenelec EN :2010 Safety Part 2-4: Particular requirements for spin extractors IEC :2008 (Modified) EN :2010/A1:2015 IEC :2008/A1:2012 (Modified) Note Cenelec EN :2015 Safety Part 2-5: Particular requirements for dishwashers IEC :2012 (Modified) EN : A11: A12: A1: A2: Cenelec EN :2015 Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances IEC :2014 (Modified) EN : A11: A12: A13: A1: A2: Cenelec EN :2010 Safety Part 2-7: Particular requirements for washing machines IEC :2008 (Modified) EN :2010/A1:2013 IEC :2008/A1:2011 (Modified) EN :2010/A11:2013 Note 3 Cenelec EN :2015 Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances IEC :2012 (Modified) EN : A1: A2: EN :2015/A1:2016 IEC :2012/A1:2015 Note

67 EN Official Journal of the European Union C 209/65 Cenelec EN :2003 Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances IEC :2002 (Modified) EN :2003/A1:2004 IEC :2002/A1:2004 EN :2003/A2:2006 IEC :2002/A2:2006 EN :2003/A12:2007 EN :2003/A13: Note 3 EN :2003/A13:2010/AC:2011 EN :2003/A13:2010/AC:2012 Restriction: The application of the following parts of standard EN :2003, as last amended by A13:2010, does not confer a presumption of conformity to the safety objectives laid down in point 1(c) of Annex I to Directive 2014/35/EU, in conjunction with point 2(b) of that Annex: footnote b of Table Z101 in Section 11, the parts of Section 7.1 which refer to footnote b of Table Z101, the parts of Section 11.Z10x which refer to ventilation openings. Cenelec EN :2003 Safety Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 Cenelec EN :2010 Safety Part 2-11: Particular requirements for tumble dryers IEC :2008 (Modified) EN :2010/A1:2015 IEC :2008/A1:2012 (Modified) Note EN :2010/A11:2012 Note 3 Cenelec EN :2003 Safety Part 2-12: Particular requirements for warming plates and similar appliances IEC :2002

68 C 209/66 EN Official Journal of the European Union EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 Cenelec EN :2010 Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances IEC :2009 EN :2010/A11:2012 Note 3 Cenelec EN :2002 Safety Part 2-15: Particular requirements for appliances for heating liquids IEC :2002 EN :2002/A1:2005 IEC :2002/A1:2005 EN :2002/A2:2008 IEC :2002/A2:2008 EN :2002/A11:2012 Note 3 EN :2002/A11:2012/AC:2013 EN :2002/AC:2005 EN :2002/AC:2006 Cenelec EN :2003 Safety Part 2-16: Particular requirements for food waste disposers IEC :2002 (Modified) EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A2:2012 IEC :2002/A2:2011 Note 3 Cenelec EN :2013 Safety Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances IEC :2012

69 EN Official Journal of the European Union C 209/67 Cenelec EN :2003 Safety Part 2-21: Particular requirements for storage water heaters IEC :2002 (Modified) EN :2003/A1:2005 IEC :2002/A1:2004 EN :2003/A2:2008 IEC :2002/A2:2008 Note 3 EN :2003/AC:2007 EN :2003/AC:2010 Cenelec EN :2003 Safety Part 2-23: Particular requirements for appliances for skin or hair care IEC :2003 EN :2003/A1:2008 IEC :2003/A1:2008 EN :2003/A2:2015 IEC :2003/A2:2012 (Modified) Note EN :2003/A11:2010 Note 3 EN :2003/A11:2010/AC:2012 Cenelec EN :2012 Safety Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens IEC :2010 (Modified) EN :2012/A1:2015 IEC :2010/A1:2014 Note EN :2012/A2:2016 IEC :2010/A2:2015 Note Cenelec EN :2003 Safety Part 2-26: Particular requirements for clocks IEC :2002

70 C 209/68 EN Official Journal of the European Union EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 Cenelec EN :2013 Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation IEC :2009 (Modified) Cenelec EN :2003 Safety Part 2-28: Particular requirements for sewing machines IEC :2002 (Modified) EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 Cenelec EN :2004 Safety Part 2-29: Particular requirements for battery chargers IEC : A1:2004 EN :2004/A2:2010 IEC :2002/A2:2009 Note 3 Cenelec EN :2009 Safety Part 2-30: Particular requirements for room heaters IEC :2009 EN :2009/A11:2012 Note 3 EN :2009/AC:2010 EN :2009/AC:2014 Cenelec EN :2014 Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors IEC :2012 (Modified) EN : A1: A2: Cenelec EN :2003 Safety Part 2-32: Particular requirements for massage appliances IEC :2002

71 EN Official Journal of the European Union C 209/69 EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A2:2015 IEC :2002/A2:2013 (Modified) Note Cenelec EN :2013 Safety Part 2-34: Particular requirements for motor-compressors IEC :2012 EN : A11: A1: A2: Cenelec EN :2016 Safety Part 2-35: Particular requirements for instantaneous water heaters IEC :2012 (Modified) EN : A1: A2: Cenelec EN :2002 Safety Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements IEC :2002 EN :2002/A1:2004 IEC :2002/A1:2004 EN :2002/A2:2008 IEC :2002/A2:2008 EN :2002/A11:2012 Note 3 EN :2002/AC:2007 Cenelec EN :2002 Safety Part 2-37: Particular requirements for commercial electric deep fat fryers IEC :2002 EN :2002/A1:2008 IEC :2002/A1:2008 EN :2002/A11:2012 Note 3 EN :2002/AC:2007 Cenelec EN :2003 Safety Part 2-38: Particular requirements for commercial electric griddles and griddle grills IEC :2002

72 C 209/70 EN Official Journal of the European Union EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 EN :2003/AC:2007 Cenelec EN :2003 Safety Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans IEC :2002 EN :2003/A1:2004 IEC :2002/A1:2004 EN :2003/A2:2008 IEC :2002/A2:2008 Note 3 EN :2003/AC:2007 Cenelec EN :2003 Safety Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC :2002 (Modified) EN :2003/A1:2006 IEC :2002/A1:2005 (Modified) EN :2003/A2:2009 IEC :2002/A2:2005 (Modified) EN :2003/A11:2004 EN :2003/A12:2005 EN :2003/A13:2012 Note 3 EN :2003/A13:2012/AC:2013 EN :2003/AC:2006 EN :2003/AC:2010 Cenelec EN :2003 Safety Part 2-41: Particular requirements for pumps IEC :2002 EN :2003/A1:2004 IEC :2002/A1:2004 EN :2003/A2:2010 IEC :2002/A2:2009 Note 3

73 EN Official Journal of the European Union C 209/71 Cenelec EN :2003 Safety Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A11:2012 Note 3 EN :2003/AC:2007 Cenelec EN :2003 Safety Part 2-43: Particular requirements for clothes dryers and towel rails IEC :2002 EN :2003/A1:2006 IEC :2002/A1:2005 EN :2003/A2:2008 IEC :2002/A2:2008 Note 3 Cenelec EN :2002 Safety Part 2-44: Particular requirements for ironers IEC :2002 EN :2002/A1:2008 IEC :2002/A1:2008 EN :2002/A2:2012 IEC :2002/A2:2011 Note 3 Cenelec EN :2002 Safety Part 2-45: Particular requirements for portable heating tools and similar appliances IEC :2002 EN :2002/A1:2008 IEC :2002/A1:2008 EN :2002/A2:2012 IEC :2002/A2:2011 Note 3

74 C 209/72 EN Official Journal of the European Union Cenelec EN :2003 Safety Part 2-47: Particular requirements for commercial electric boiling pans IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A11:2012 Note 3 EN :2003/AC:2007 Cenelec EN :2003 Safety Part 2-48: Particular requirements for commercial electric grillers and toasters IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A11:2012 Note 3 EN :2003/AC:2007 Cenelec EN :2003 Safety Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A11:2012 Note 3 EN :2003/AC:2007 Cenelec EN :2003 Safety Part 2-50: Particular requirements for commercial electric bains-marie IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2007 Note 3 EN :2003/AC:2007

75 EN Official Journal of the European Union C 209/73 Cenelec EN :2003 Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A2:2012 IEC :2002/A2:2011 Note 3 Cenelec EN :2003 Safety Part 2-52: Particular requirements for oral hygiene appliances IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A11:2010 Note 3 EN :2003/A11:2010/AC:2012 Cenelec EN :2011 Safety Part 2-53: Particular requirements for sauna heating appliances and infrared cabins IEC :2011 Cenelec EN :2008 Safety Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam IEC :2008 EN :2008/A1:2015 IEC :2008/A1:2015 Note EN :2008/A11:2012 Note EN :2008/A11:2012/AC:2015

76 C 209/74 EN Official Journal of the European Union Cenelec EN :2003 Safety Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 Cenelec EN :2003 Safety Part 2-56: Particular requirements for projectors and similar appliances IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A2:2014 IEC :2002/A2:2014 Note Cenelec EN :2005 Safety Part 2-58: Particular requirements for commercial electric dishwashing machines IEC :2002 (Modified) Cenelec EN :2003 Safety Part 2-59: Particular requirements for insect killers IEC :2002 (Modified) EN :2003/A1:2006 IEC :2002/A1:2006 EN :2003/A2:2009 IEC :2002/A2:2009 Note 3 Cenelec EN :2003 Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool spas IEC :2002

77 EN Official Journal of the European Union C 209/75 EN :2003/A1:2005 IEC :2002/A1:2004 EN :2003/A2:2008 IEC :2002/A2:2008 EN :2003/A11:2010 EN :2003/A12:2010 Note 3 Cenelec EN :2003 Safety Part 2-61: Particular requirements for thermal-storage room heaters IEC :2002 EN :2003/A1:2005 IEC :2002/A1:2005 EN :2003/A2:2008 IEC :2002/A2:2008 Note 3 Cenelec EN :2003 Safety Part 2-62: Particular requirements for commercial electric rinsing sinks IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 EN :2003/AC:2007 Cenelec EN :2003 Safety Part 2-65: Particular requirements for air-cleaning appliances IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A11:2012 Note 3 Cenelec EN :2003 Safety Part 2-66: Particular requirements for water-bed heaters IEC :2002

78 C 209/76 EN Official Journal of the European Union EN :2003/A1:2008 IEC :2002/A1:2008 EN :2003/A2:2012 IEC :2002/A2:2011 Note 3 Cenelec EN :2002 Safety Part 2-70: Particular requirements for milking machines IEC :2002 Cenelec EN :2003 Safety Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals IEC :2002 (Modified) EN :2003/A1:2007 IEC :2002/A1:2007 Note 3 Cenelec EN :2003 Safety Part 2-73: Particular requirements for fixed immersion heaters IEC :2002 (Modified) EN :2003/A1:2006 IEC :2002/A1:2006 EN :2003/A2:2009 IEC :2002/A2:2009 Note 3 Cenelec EN :2003 Safety Part 2-74: Particular requirements for portable immersion heaters IEC :2002 EN :2003/A1:2006 IEC :2002/A1:2006 EN :2003/A2:2009 IEC :2002/A2:2009 Note 3 Cenelec EN :2004 Safety Part 2-75: Particular requirements for commercial dispensing appliances and vending machines IEC :2002 (Modified)

79 EN Official Journal of the European Union C 209/77 EN :2004/A1:2005 IEC :2002/A1:2004 EN :2004/A2:2008 IEC :2002/A2:2008 EN :2004/A11:2006 EN :2004/A12:2010 Note 3 Cenelec EN :2003 Safety Part 2-78: Particular requirements for outdoor barbecues IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 Cenelec EN : Safety Part 2-80: Particular requirements for fans IEC :2002 EN :2003/A1:2004 IEC :2002/A1:2004 EN :2003/A2:2009 IEC :2002/A2:2008 Note 3 Cenelec EN :2003 Safety Part 2-81: Particular requirements for foot warmers and heating mats IEC :2002 EN :2003/A1:2007 IEC :2002/A1:2007 EN :2003/A2:2012 IEC :2002/A2:2011 Note 3 Cenelec EN :2003 Safety Part 2-82: Particular requirements for amusement machines and personal service machines IEC :2002

80 C 209/78 EN Official Journal of the European Union EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 Cenelec EN :2002 Safety Part 2-83: Particular requirements for heated gullies for roof drainage IEC :2001 EN :2002/A1:2008 IEC :2001/A1:2008 Note 3 Cenelec EN :2003 Safety Part 2-84: Particular requirements for toilets IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 Cenelec EN :2003 Safety Part 2-85: Particular requirements for fabric steamers IEC :2002 EN :2003/A1:2008 IEC :2002/A1:2008 Note 3 Cenelec EN :2003 Safety Part 2-86: Particular requirements for electric fishing machines IEC :2002 (Modified) EN :2003/A1:2005 IEC :2002/A1:2005 EN :2003/A2:2016 IEC :2002/A2:2012 Note EN :2003/A11:2016 Note Cenelec EN :2002 Safety Part 2-87: Particular requirements for electrical animal-stunning equipment IEC :2002

81 EN Official Journal of the European Union C 209/79 EN :2002/A1:2007 IEC :2002/A1:2007 Note 3 Cenelec EN :2002 Safety Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems IEC :2002 Cenelec EN :2006 Safety Part 2-90: Particular requirements for commercial microwave ovens IEC :2006 EN :2006/A1:2010 IEC :2006/A1:2010 Note 3 Cenelec EN :2002 Safety Part 2-96: Particular requirements for flexible sheet heating elements for room heating IEC :2002 EN :2002/A1:2004 IEC :2002/A1:2003 EN :2002/A2:2009 IEC :2002/A2:2008 Note 3 Cenelec EN :2006 Safety Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment IEC :2002 (Modified) + A1:2004 (Modified) EN :2006/A2:2010 IEC :2002/A2:2008 (Modified) EN :2006/A11:2008 EN :2006/A12:2015 Note Cenelec EN :2003 Safety Part 2-98: Particular requirements for humidifiers IEC :2002

82 C 209/80 EN Official Journal of the European Union EN :2003/A1:2005 IEC :2002/A1:2004 EN :2003/A2:2008 IEC :2002/A2:2008 Note 3 Cenelec EN :2003 Safety Part 2-99: Particular requirements for commercial electric hoods IEC :2003 Cenelec EN :2002 Safety Part 2-101: Particular requirements for vaporizers IEC :2002 EN :2002/A1:2008 IEC :2002/A1:2008 EN :2002/A2:2014 IEC :2002/A2:2014 Note Cenelec EN :2016 Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC :2004 (Modified) IEC :2004/A1:2008 (Modified) + A1:2008 (Modified) IEC :2004/A2:2012 (Modified) EN : A1: Cenelec EN :2005 Safety Part 2-105: Particular requirements for multifunctional shower cabinets IEC :2004 EN :2005/A1:2008 IEC :2004/A1:2008 EN :2005/A11:2010 Note 3 Cenelec EN :2007 Safety Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings IEC :2007

83 EN Official Journal of the European Union C 209/81 Cenelec EN :2008 Safety Part 2-108: Particular requirements for electrolysers IEC :2008 (Modified) Cenelec EN :2010 Safety Part 2-109: Particular requirements for UV radiation water treatment appliances IEC :2010 Cenelec EN :2012 Coupling capacitors and capacitor dividers Part 1: General rules IEC :2012 EN :2012/AC:2013 Cenelec EN 60360:1998 Standard method of measurement of lamp cap temperature rise IEC 60360:1998 Cenelec EN 60399:2004 Barrel thread for lampholders with shade holder ring IEC 60399:2004 EN 60399:2004/A1:2008 IEC 60399:2004/A1:2008 Note 3 Cenelec EN 60400:2008 Lampholders for tubular fluorescent lamps and starterholders IEC 60400:2008 EN 60400:2008/A1:2011 IEC 60400:2008/A1:2011 EN 60400:2008/A2:2014 IEC 60400:2008/A2:2014 Note Cenelec EN 60423:2007 Conduit systems for cable management Outside diameters of conduits for electrical installations and threads for conduits and fittings IEC 60423:2007

84 C 209/82 EN Official Journal of the European Union Cenelec EN :2000 Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes IEC :1999 (Modified) EN :2000/A1:2005 IEC :1999/A1:2005 EN :2000/A2:2012 IEC :1999/A2:2011 Note 3 Cenelec EN :2000 Incandescent lamps Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes IEC :1999 (Modified) EN :2000/A1:2005 IEC :1999/A1:2005 (Modified) EN :2000/A2:2012 IEC :1999/A2:2012 Note 3 Cenelec EN :2013 Incandescent lamps Safety specifications Part 3: Tungsten-halogen lamps (non-vehicle) IEC :2012 Cenelec EN 60477:1997 Laboratory d.c. resistors IEC 60477:1974 EN 60477:1997/A1:1997 IEC 60477:1974/A1:1997 Note 3 Cenelec EN :1997 Laboratory resistors Part 2: Laboratory a.c. resistors IEC :1979 EN :1997/A1:1997 IEC :1979/A1:1997 Note 3 Cenelec EN :2015 Safety in installations for electroheating and electromagnetic processing Part 1: General requirements IEC :2015 EN :

85 EN Official Journal of the European Union C 209/83 Cenelec EN :2006 Safety in electroheat installations Part 2: Particular requirements for resistance heating equipment IEC :2006 Cenelec EN :2005 Safety in electroheat installations Part 3: Particular requirements for induction and conduction heating and induction melting installations IEC :2005 Cenelec EN :2013 Safety in electroheating installations Part 4: Particular requirements for arc furnace installations IEC :2013 EN : Cenelec EN :2011 Safety in electroheat installations Part 6: Specifications for safety in industrial microwave heating equipment IEC :2011 Cenelec EN :2008 Safety in electroheat installations Part 7: Particular requirements for installations with electron guns IEC :2008 Cenelec EN :2005 Safety in electroheat installations Part 8: Particular requirements for electroslag remelting furnaces IEC :2005 Cenelec EN :2005 Safety in electroheat installations Part 9: Particular requirements for high-frequency dielectric heating installations IEC :2005

86 C 209/84 EN Official Journal of the European Union Cenelec EN :2013 Safety in electroheating installations Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications IEC :2013 Cenelec EN :2013 Safety in electroheating installations Part 12: Particular requirements for infrared electroheating installations IEC :2013 Cenelec EN :2009 Safety in electroheat installations Part 21: Particular requirements for resistance heating equipment Heating and melting glass equipment IEC :2008 Cenelec EN 60523:1993 Direct-current potentiometers IEC 60523: A1:1979 EN 60523:1993/A2:1997 IEC 60523:1975/A2:1997 Note 3 Cenelec EN 60524:1993 Direct-current resistive volt ratio boxes IEC 60524: A1:1981 EN 60524:1993/A2:1997 IEC 60524:1975/A2:1997 Note 3 Cenelec EN 60529:1991 Degrees of protection provided by enclosures (IP Code) IEC 60529:1989 EN 60529:1991/A1:2000 IEC 60529:1989/A1:1999 EN 60529:1991/A2:2013 IEC 60529:1989/A2:2013 Note

87 EN Official Journal of the European Union C 209/85 EN 60529:1991/AC:1993 Cenelec EN 60564:1993 D.C. bridges for measuring resistance IEC 60564: A1:1981 EN 60564:1993/A2:1997 IEC 60564:1977/A2:1997 Note 3 Cenelec EN 60570:2003 Electrical supply track systems for luminaires IEC 60570:2003 (Modified) Cenelec EN :2015 Luminaires Part 1: General requirements and tests IEC :2014 (Modified) EN : A11: EN :2015/AC:2015 EN :2015/AC:2016 Cenelec EN :1989 Luminaires Part 2: Particular requirements Section 1: Fixed general purpose luminaires IEC : A1:1987 Cenelec EN :2012 Luminaires Part 2-2: Particular requirements Recessed luminaires IEC :2011 Cenelec EN :2003 Luminaires Part 2-3: Particular requirements Luminaires for road and street lighting IEC :2002 EN :2003/A1:2011 IEC :2002/A1:2011 Note 3 EN :2003/AC:2005 Cenelec EN :1997 Luminaires Part 2: Particular requirements Section 4: Portable general purpose luminaires IEC :1997

88 C 209/86 EN Official Journal of the European Union Cenelec EN :2015 Luminaires Part 2-5: Particular requirements Floodlights IEC :2015 EN : Cenelec EN :1989 Luminaires Part 2: Particular requirements Section 7: Portable luminaires for garden use IEC :1982 (Modified) + A1:1987 (Modified) EN :1989/A2:1996 IEC :1982/A2:1994 (Modified) EN :1989/A13:1997 Note 3 EN :1989/A2:1996/AC:1999 Cenelec EN :2013 Luminaires Part 2-8: Particular requirements Handlamps IEC :2013 Cenelec EN :1989 Luminaires Part 2: Particular requirements Section 9: Photo and film luminaires (nonprofessional) IEC :1987 EN :1989/A1:1994 IEC :1987/A1:1993 Note 3 Cenelec EN :2003 Luminaires Part 2-10: Particular requirements Portable luminaires for children IEC :2003 EN :2003/AC:2005 Cenelec EN :2013 Luminaires Part 2-11: Particular requirements Aquarium luminaires IEC :2013

89 EN Official Journal of the European Union C 209/87 Cenelec EN :2013 Luminaires Part 2-12: Particular requirements Mains socket-outlet mounted nightlights IEC :2013 Cenelec EN :2006 Luminaires Part 2-13: Particular requirements Ground recessed luminaires IEC :2006 EN :2006/A1:2012 IEC :2006/A1:2011 EN :2006/AC:2006 Cenelec EN :2009 Luminaires Part 2-14: Particular requirements Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment IEC :2009 Cenelec EN :1989 Luminaires Part 2: Particular requirements Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor) IEC : A1:1987 EN :1989/A2:1991 IEC :1984/A2:1990 Note 3 Cenelec EN :1989 Luminaires Part 2: Particular requirements Section 19: Air-handling luminaires (safety requirements) IEC :1981 (Modified) + A1:1987 (Modified) EN :1989/A2:1998 IEC :1981/A2:1997 Note 3 EN :1989/AC:2005 Cenelec EN :2015 Luminaires Part 2-20: Particular requirements Lighting chains IEC :2014 EN :

90 C 209/88 EN Official Journal of the European Union Cenelec EN :2015 Luminaires Part 2-21: Particular requirements Rope lights IEC :2014 Cenelec EN :2014 Luminaires Part 2-22: Particular requirements Luminaires for emergency lighting IEC :2014 EN : A1: A2: EN :2014/AC:2015 Cenelec EN :1996 Luminaires Part 2-23: Particular requirements Extra low-voltage lighting systems for filament lamps IEC :1996 EN :1996/A1:2000 IEC :1996/A1:2000 Note 3 EN :1996/AC:1997 Cenelec EN :2013 Luminaires Part 2-24: Particular requirements Luminaires with limited surface temperatures IEC :2013 EN : Cenelec EN :1994 Luminaires Part 2-25: Particular requirements Luminaires for use in clinical areas of hospitals and health care buildings IEC IEC :1994 EN :1994/A1:2004 IEC :1994/A1:2004 Note 3 Cenelec EN 60618:1997 Inductive voltage dividers IEC 60618: A1:1981 EN 60618:1997/A2:1997 IEC 60618:1978/A2:1997 Note 3 Cenelec EN :2015 Electroacoustics Audiometric equipment Part 1: Equipment for pure-tone audiometry IEC :2012 EN :2001 EN :

91 EN Official Journal of the European Union C 209/89 Cenelec EN :2007 Electroacoustics Audiometric equipment Part 3: Test signals of short duration IEC :2007 Cenelec EN :2010 Electroacoustics Audiometric equipment Part 6: Instruments for the measurement of otoacoustic emissions IEC :2009 Cenelec EN :2010 Electroacoustics Audiometric equipment Part 7: Instruments for the measurement of auditory brainstem responses IEC :2009 Cenelec EN :1999 Switches for household and similar fixed-electrical installations Part 1: General requirements IEC :1998 (Modified) EN :1999/A1:2002 IEC :1998/A1:1999 (Modified) EN :1999/A2:2008 IEC :1998/A2:2006 (Modified) Note 3 Cenelec EN :2004 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches IEC :2002 (Modified) + IS1: IS2:2012 EN :2004/A1:2009 IEC :2002/A1:2008 (Modified) EN :2004/A12:2010 Note 3 EN :2004/AC:2007

92 C 209/90 EN Official Journal of the European Union Cenelec EN :2006 Switches for household and similar fixed electrical installations Part 2-2: Particular requirements Electromagnetic remote-control switches (RCS) IEC :2006 Cenelec EN :2006 Switches for household and similar fixed electrical installations Part 2-3: Particular requirements Time delay switches (TDS) IEC :2006 Cenelec EN :2005 Switches for household and similar fixed electrical installations Part 2-4: Particular requirements Isolating switches IEC :2004 (Modified) Cenelec EN :2012 Switches for household and similar fixed electrical installations Part 2-6: Particular requirements Fireman's switches for exterior and interior signs and luminaires IEC :2012 (Modified) Cenelec EN :2005 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements IEC :2002 (Modified) EN :2005/A1:2013 IEC :2002/A1:2011 (Modified) Note EN :2005/AC:2007 EN :2005/AC:2010 Cenelec EN :2007 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 21: Particular requirements for boxes and enclosures with provision for suspension means IEC :2004 (Modified)

93 EN Official Journal of the European Union C 209/91 Cenelec EN :2006 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular requirements for connecting boxes and enclosures IEC :2003 (Modified) Cenelec EN :2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 23: Particular requirements for floor boxes and enclosures IEC :2006 (Modified) Cenelec EN :2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment IEC :2011 (Modified) Cenelec EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals IEC IEC 60688:2012 Cenelec EN 60691:2003 Thermal-links Requirements and application guide IEC 60691:2002 EN 60691:2003/A1:2007 IEC 60691:2002/A1:2006 EN 60691:2003/A2:2010 IEC 60691:2002/A2:2010 Note 3 Cenelec EN :2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 1: Cables IEC :2002

94 C 209/92 EN Official Journal of the European Union EN :2002/A1:2015 IEC :2002/A1:2015 Note Cenelec EN :2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: Terminations IEC :2002 EN :2002/A1:2015 IEC :2002/A1:2015 Note Cenelec EN 60715:2001 Dimensions of low-voltage switchgear and controlgear Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations IEC 60715: A1:1995 Cenelec EN 60719:1993 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V IEC 60719:1992 Cenelec EN :2010 Cable networks for television signals, sound signals and interactive services Part 11: Safety IEC :2010 Cenelec EN :2011 Automatic electrical controls for household and similar use Part 1: General requirements IEC :2010 (Modified) Cenelec EN :1995 Automatic electrical controls for household and similar use Part 1: General requirements IEC :1993 (Modified) EN :1995/A1:1997 IEC :1993/A1:1994 (Modified) EN :1995/A2:1998 IEC :1993/A2:1997 EN :1995/A11:1996 EN :1995/A12:1996

95 EN Official Journal of the European Union C 209/93 EN :1995/A14:1998 EN :1995/A15:1998 EN :1995/A16:1999 EN :1995/A17:2000 EN :1995/A18:2003 Note 3 EN :1995/AC:2007 Cenelec EN :2002 Automatic electrical controls for household and similar use Part 2-2: Particular requirements for thermal motor protectors IEC :2001 (Modified) EN :2002/A1:2006 IEC :2001/A1:2005 (Modified) EN :2002/A11:2005 Note 3 Cenelec EN :2007 Automatic electrical controls for household and similar use Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps IEC :2006 (Modified) Cenelec EN :2007 Automatic electrical controls for household and similar use Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type IEC :2006 (Modified) Cenelec EN :2015 Automatic electrical controls Part 2-5: Particular requirements for automatic electrical burner control systems IEC :2013 (Modified) EN : A11: A1: A2: Cenelec EN :2016 Automatic electrical controls Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC :2015 EN :

96 C 209/94 EN Official Journal of the European Union Cenelec EN :2010 Automatic electrical controls for household and similar use Part 2-7: Particular requirements for timers and time switches IEC :2008 (Modified) EN :2010/AC:2011 Cenelec EN :2002 Automatic electrical controls for household and similar use Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements IEC :2000 (Modified) EN :2002/A1:2003 IEC :2000/A1:2002 (Modified) Note 3 Cenelec EN :2010 Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls IEC :2008 (Modified) Cenelec EN :2007 Automatic electrical controls for household and similar use Part 2-10: Particular requirements for motor-starting relays IEC :2006 Cenelec EN :2008 Automatic electrical controls for household and similar use Part 2-11: Particular requirements for energy regulators IEC :2006 Cenelec EN :2006 Automatic electrical controls for household and similar use Part 2-12: Particular requirements for electrically operated door locks IEC :2005 (Modified) EN :2006/A11:2008 Note 3

97 EN Official Journal of the European Union C 209/95 Cenelec EN :2008 Automatic electrical controls for household and similar use Part 2-13: Particular requirements for humidity sensing controls IEC :2006 (Modified) Cenelec EN :1997 Automatic electrical controls for household and similar use Part 2-14: Particular requirements for electric actuators IEC :1995 (Modified) EN :1997/A1:2001 IEC :1995/A1:2001 EN :1997/A2:2008 IEC :1995/A2:2007 (Modified) EN :1997/A11:2005 Note 3 Cenelec EN :2010 Automatic electrical controls for household and similar use Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls IEC :2008 (Modified) Cenelec EN :2002 Automatic electrical controls for household and similar use Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements IEC :1997 (Modified) + A1:2000 (Modified) EN :2002/A2:2008 IEC :1997/A2:2007 EN :2002/A11:2005 Note 3 Cenelec EN :2014 Test on gases evolved during combustion of materials from cables Part 1: Determination of the halogen acid gas content IEC :2011 EN :1998 EN :1998 EN :1998 EN :

98 C 209/96 EN Official Journal of the European Union Cenelec EN :2014 Test on gases evolved during combustion of materials from cables Part 2: Determination of acidity (by ph measurement) and conductivity IEC :2011 EN :1998 EN :1998 EN :1998 EN : Cenelec EN 60799:1998 Electrical accessories Cord sets and interconnection cord sets IEC 60799:1998 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 100: General IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 201: General tests Measurement of insulation thickness IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 202: General tests Measurement of thickness of nonmetallic sheath IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 203: General tests Measurement of overall dimensions IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 301: Electrical tests Measurement of the permittivity at 23 o C of filling compounds IEC :2012

99 EN Official Journal of the European Union C 209/97 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 302: Electrical tests Measurement of the d.c. resistivity at 23 o C and 100 o C of filling compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 401: Miscellaneous tests Thermal ageing methods Ageing in an air oven IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 402: Miscellaneous tests Water absorption tests IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 403: Miscellaneous tests Ozone resistance test on crosslinked compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 404: Miscellaneous tests Mineral oil immersion tests for sheaths IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 405: Miscellaneous tests Thermal stability test for PVC insulations and PVC sheaths IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 406: Miscellaneous tests Resistance to stress cracking of polyethylene and polypropylene compounds IEC :2012

100 C 209/98 EN Official Journal of the European Union Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 407: Miscellaneous tests Measurement of mass increase of polyethylene and polypropylene compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 408: Miscellaneous tests Long-term stability test of polyethylene and polypropylene compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 409: Miscellaneous tests Loss of mass test for thermoplastic insulations and sheaths IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 410: Miscellaneous tests Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 411: Miscellaneous tests Low-temperature brittleness of filling compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 412: Miscellaneous tests Thermal ageing methods Ageing in an air bomb IEC :2012

101 EN Official Journal of the European Union C 209/99 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 501: Mechanical tests Tests for determining the mechanical properties of insulating and sheathing compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 502: Mechanical tests Shrinkage test for insulations IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 503: Mechanical tests Shrinkage test for sheaths IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 504: Mechanical tests Bending tests at low temperature for insulation and sheaths IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 505: Mechanical tests Elongation at low temperature for insulations and sheaths IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 506: Mechanical tests Impact test at low temperature for insulations and sheaths IEC :2012

102 C 209/100 EN Official Journal of the European Union Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 507: Mechanical tests Hot set test for cross-linked materials IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 508: Mechanical tests Pressure test at high temperature for insulation and sheaths IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 509: Mechanical tests Test for resistance of insulations and sheaths to cracking (heat shock test) IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 510: Mechanical tests Methods specific to polyethylene and polypropylene compounds Wrapping test after thermal ageing in air IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 511: Mechanical tests Measurement of the melt flow index of polyethylene compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 512: Mechanical tests Methods specific to polyethylene and polypropylene compounds Tensile strength and elongation at break after conditioning at elevated temperature IEC :2012

103 EN Official Journal of the European Union C 209/101 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 513: Mechanical tests Methods specific to polyethylene and polypropylene compounds Wrapping test after conditioning IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 601: Physical tests Measurement of the drop point of filling compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 602: Physical tests Separation of oil in filling compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 603: Physical tests Measurement of total acid number of filling compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 604: Physical tests Measurement of absence of corrosive components in filling compounds IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 605: Physical tests Measurement of carbon black and/or mineral filler in polyethylene compounds IEC :2012

104 C 209/102 EN Official Journal of the European Union Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 606: Physical tests Methods for determining the density IEC :2012 Cenelec EN :2012 Electric and optical fibre cables Test methods for non-metallic materials Part 607: Physical tests Test for the assessment of carbon black dispersion in polyethylene and polypropylene IEC :2012 Cenelec EN :2014 Safety of laser products Part 1: Equipment classification and requirements IEC :2014 Cenelec EN :2004 Safety of laser products Part 2: Safety of optical fibre communication systems (OFCS) IEC :2004 EN :2004/A1:2007 IEC :2004/A1:2006 EN :2004/A2:2010 IEC :2004/A2:2010 Note 3 Cenelec EN :2006 Safety of laser products Part 4: Laser guards IEC :2006 EN :2006/A1:2008 IEC :2006/A1:2008 EN :2006/A2:2011 IEC :2006/A2:2011 Note 3 Cenelec EN :2004 Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information IEC :2004

105 EN Official Journal of the European Union C 209/103 Cenelec EN :2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including V Part 1: General Performance, testing and rating Safety requirements Guide for installation and operation IEC :2014 EN : A1: EN :2014/AC:2014 Cenelec EN :2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including V Part 2: Ageing test, selfhealing test and destruction test IEC :2014 EN : Cenelec EN :2004 Miscellaneous lampholders Part 1: General requirements and tests IEC :2004 EN :2004/A1:2008 IEC :2004/A1:2008 EN :2004/A2:2011 IEC :2004/A2:2011 Note 3 Cenelec EN :1996 Miscellaneous lampholders Part 2: Particular requirements Section 1: Lampholders S14 IEC :1994 EN :1996/A1:1998 IEC :1994/A1:1998 EN :1996/A2: :1994/A2:2004 Note 3 Cenelec EN :2006 Miscellaneous lampholders Part 2-2: Particular requirements Connectors for LED-modules IEC :2006 EN :2006/A1:2012 IEC :2006/A1:2012 Note 3

106 C 209/104 EN Official Journal of the European Union Cenelec EN :2003 Electrical accessories Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation IEC :2002 (Modified) EN :2003/A1:2004 IEC :2002/A1:2002 (Modified) EN :2003/A11:2005 EN :2003/A13:2012 Note 3 EN :2003/AC:2004 Cenelec EN :2006 Electrical accessories Circuit-breakers for overcurrent protection for household and similar installations Part 2: Circuit-breakers for a.c. and d.c. operation IEC :2000 (Modified) + A1:2003 (Modified) Cenelec EN :1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kv Part 1: General Performance, testing and rating Safety requirements Guide for installation and operation IEC :1996 EN :1996/A1:2003 IEC :1996/A1:2002 Note 3 Cenelec EN :1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kv Part 2: Ageing test and destruction test IEC :1995 Cenelec EN :1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kv Part 3: Internal fuses IEC :1996

107 EN Official Journal of the European Union C 209/105 Cenelec EN 60934:2001 Circuit-breakers for equipment (CBE) IEC 60934:2000 EN 60934:2001/A1:2007 IEC 60934:2000/A1:2007 EN 60934:2001/A2:2013 IEC 60934:2000/A2:2013 Note 3 Cenelec EN :2007 Low-voltage switchgear and controlgear Part 1: General rules IEC :2007 EN :2007/A1:2011 IEC :2007/A1:2010 EN :2007/A2:2014 IEC :2007/A2:2014 Note Cenelec EN :2006 Low-voltage switchgear and controlgear Part 2: Circuit-breakers IEC :2006 EN :2006/A1:2009 IEC :2006/A1:2009 EN :2006/A2:2013 IEC :2006/A2:2013 Note 3 Cenelec EN :2009 Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units IEC :2008 EN :2009/A1:2012 IEC :2008/A1:2012 EN :2009/A2:2015 IEC :2008/A2:2015 Note Cenelec EN :2010 Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters Electromechanical contactors and motor-starters IEC :2009 EN :2010/A1:2012 IEC :2009/A1:2012 Note 3

108 C 209/106 EN Official Journal of the European Union Cenelec EN :2012 Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters AC semiconductor motor controllers and starters IEC :2011 Cenelec EN :2014 Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters AC semiconductor controllers and contactors for nonmotor loads IEC :2014 EN : A1: A2: Cenelec EN :2004 Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical control circuit devices IEC :2003 EN :2004/A1:2009 IEC :2003/A1:2009 Note 3 EN :2004/AC:2004 EN :2004/AC:2005 Cenelec EN :2007 Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements Proximity switches IEC :2007 EN :2007/A1:2012 IEC :2007/A1:2012 Note 3 Cenelec EN :2003 Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements Method of assessing the performance of low-energy contacts Special tests IEC :2002 Cenelec EN :1997 Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements Electrical emergency stop device with mechanical latching function IEC :1997

109 EN Official Journal of the European Union C 209/107 EN :1997/A1:2005 IEC :1997/A1:2005 EN :1997/A11:2013 Note 3 Cenelec EN :2003 Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for proximity devices with analogue output IEC :2003 Cenelec EN :2006 Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements Three-position enabling switches IEC :2006 Cenelec EN :2007 Low-voltage switchgear and controlgear Part 5-9: Control circuit devices and switching elements Flow rate switches IEC :2006 Cenelec EN :2005 Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment Transfer switching equipment IEC :2005 EN :2005/A1:2014 IEC :2005/A1:2013 Note Cenelec EN :2003 Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment Control and protective switching devices (or equipment) (CPS) IEC :2002 EN :2003/A1:2007 IEC :2002/A1:2007 Note 3 Cenelec EN :2009 Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors IEC :2009 Cenelec EN :2009 Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment Protective conductor terminal blocks for copper conductors IEC :2009

110 C 209/108 EN Official Journal of the European Union Cenelec EN :2009 Low-voltage switchgear and controlgear Part 7-3: Ancillary equipment Safety requirements for fuse terminal blocks IEC :2009 Cenelec EN :2003 Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines IEC :2003 EN :2003/A1:2006 IEC :2003/A1:2006 EN :2003/A2:2012 IEC :2003/A2:2011 Note 3 Cenelec EN :2003 Information technology equipment Safety Part 21: Remote power feeding IEC :2002 Cenelec EN :2006 Information technology equipment Safety Part 22: Equipment installed outdoors IEC :2005 (Modified) EN :2006/AC:2008 Cenelec EN :2006 Information technology equipment Safety Part 23: Large data storage equipment IEC :2005 EN :2006/AC:2008 Cenelec EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services Safety requirements IEC 60968:2015 (Modified) IEC 60968:2015/COR1:2015 (Modified) EN 60968: A11: Cenelec EN :2012 Arc welding equipment Part 1: Welding power sources IEC :2012

111 EN Official Journal of the European Union C 209/109 Cenelec EN :2013 Arc welding equipment Part 2: Liquid cooling systems IEC :2013 Cenelec EN :2014 Arc welding equipment Part 3: Arc striking and stabilizing devices IEC :2013 EN : Cenelec EN :2013 Arc welding equipment Part 5: Wire feeders IEC :2013 Cenelec EN :2016 Arc welding equipment Part 6: Limited duty equipment IEC :2015 EN : Cenelec EN :2013 Arc welding equipment Part 7: Torches IEC :2013 Cenelec EN :2009 Arc welding equipment Part 8: Gas consoles for welding and plasma cutting systems IEC :2009 Cenelec EN :2010 Arc welding equipment Part 11: Electrode holders IEC :2010 Cenelec EN :2011 Arc welding equipment Part 12: Coupling devices for welding cables IEC :2011 Cenelec EN :2011 Arc welding equipment Part 13: Welding clamp IEC :2011 Cenelec EN :2004 Connecting devices for low-voltage circuits for household and similar purposes Part 1: General requirements IEC :2002 (Modified)

112 C 209/110 EN Official Journal of the European Union Cenelec EN :2004 Connecting devices for low-voltage circuits for household and similar purposes Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units IEC :2002 (Modified) Cenelec EN :2004 Connecting devices for low-voltage circuits for household and similar purposes Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units IEC :2002 (Modified) Cenelec EN :2004 Connecting devices for low-voltage circuits for household and similar purposes Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units IEC :2002 (Modified) Cenelec EN :2005 Connecting devices for low voltage circuits for household and similar purposes Part 2-4: Particular requirements for twist-on connecting devices IEC :2004 (Modified) Cenelec EN :2000 Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm 2 up to 35 mm 2 (included) IEC :1999 Cenelec EN :2003 Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units Part 2: Particular requirements for clamping units for conductors above 35 mm 2 up to 300 mm 2 (included) IEC :2003

113 EN Official Journal of the European Union C 209/111 Cenelec EN :2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) Part 1: General rules IEC :2010 (Modified) EN : A11: A12: A13: EN :2012/A1:2014 IEC :2010/A1:2012 (Modified) Note EN :2012/A2:2014 IEC :2010/A2:2013 (Modified) Note EN :2012/A11:2015 Note Cenelec EN :1994 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage IEC :1990 EN :1994/A11:1998 Note 3 EN :1994/A11:1998/AC:1999 Cenelec EN :2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) Part 1: General rules IEC :2010 (Modified) EN : A11: A12: A13: A14: EN :2012/A1:2014 IEC :2010/A1:2012 (Modified) Note EN :2012/A2:2014 IEC :2010/A2:2013 (Modified) Note EN :2012/A11:2015 Note Cenelec EN :1994 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage IEC :1991 EN :1994/A11:1998 Note 3

114 C 209/112 EN Official Journal of the European Union EN :1994/A11:1998/AC:1999 Cenelec EN :2010 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements IEC 61 IEC :2010 Cenelec EN :2014 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of Materials IEC :2014 Cenelec EN :2006 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-020: Particular requirements for laboratory centrifuges IEC :2006 Cenelec EN :2010 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-030: Particular requirements for testing and measuring circuits IEC IEC :2010 Cenelec EN :2012 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement IEC :2012 Cenelec EN :2012 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage IEC :2012

115 EN Official Journal of the European Union C 209/113 Cenelec EN :2005 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials IEC :2005 Cenelec EN :2015 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring IEC :2015 Cenelec EN :2003 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization IEC :2003 Cenelec EN :2013 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-201: Particular requirements for control equipment IEC :2013 EN :2013/AC:2013 Cenelec EN :2015 Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test IEC :2015 Cenelec EN 61028:1993 Electrical measuring instruments X-Y recorders IEC 61028:1991 EN 61028:1993/A2:1997 IEC 61028:1991/A2:1997 Note 3

116 C 209/114 EN Official Journal of the European Union Cenelec EN :2005 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus IEC :2005 EN :2005/A1:2014 IEC :2005/A1:2013 Note Cenelec EN :2005 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements IEC :2005 EN :2005/A1:2013 IEC :2005/A1:2013 Note 3 Cenelec EN 61048:2006 Auxiliaries for lamps Capacitors for use in tubular fluorescent and other discharge lamp circuits General and safety requirements IEC 61048:2006 EN 61048:2006/A1:2016 IEC 61048:2006/A1:2015 Note Cenelec EN 61050:1992 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kv (generally called neon-transformers) General and safety requirements IEC 61050:1991 (Modified) EN 61050:1992/A1:1995 IEC 61050:1991/A1:1994 (Modified) Note 3 Cenelec EN :2002 Switches for appliances Part 1: General requirements IEC :2000 (Modified) + A1:2001 EN :2002/A2:2008 IEC :2000/A2:2007 Note 3 Cenelec EN :2011 Switches for appliances Part 2-1: Particular requirements for cord switches IEC :2010

117 EN Official Journal of the European Union C 209/115 Cenelec EN :2005 Switches for appliances Part 2-4: Particular requirements for independently mounted switches IEC : A1:2003 Cenelec EN :2011 Switches for appliances Part 2-5: Particular requirements for change-over selectors IEC :2010 Cenelec EN 61071:2007 Capacitors for power electronics IEC 61071:2007 Cenelec EN 61095:2009 Electromechanical contactors for household and similar purposes IEC 61095:2009 Cenelec EN :2007 Programmable controllers Part 2: Equipment requirements and tests IEC :2007 Cenelec EN 61138:2007 Cables for portable earthing and short-circuiting equipment IEC 61138:2007 (Modified) Cenelec EN 61140:2002 Protection against electric shock Common aspects for installation and equipment IEC 61140:2001 EN 61140:2002/A1:2006 IEC 61140:2001/A1:2004 (Modified) Note 3 Cenelec EN :1994 Electrical measuring instruments X-t recorders Part 1: Definitions and requirements IEC :1992 EN :1994/A1:1997 IEC :1992/A1:1997 Note 3 Cenelec EN :1994 Electrical measuring instruments X-t recorders Part 2: Recommended additional test methods IEC :1992

118 C 209/116 EN Official Journal of the European Union Cenelec EN 61184:2008 Bayonet lampholders IEC IEC 61184:2008 EN 61184:2008/A1:2011 Note 3 Cenelec EN 61187:1994 Electrical and electronic measuring equipment Documentation IEC 61187:1993 (Modified) EN 61187:1994/AC:1995 Cenelec EN 61195:1999 Double-capped fluorescent lamps Safety specifications IEC 61195:1999 EN 61195:1999/A1:2013 IEC 61195:1999/A1:2012 EN 61195:1999/A2:2015 IEC 61195:1999/A2:2014 Note Cenelec EN 61199:2011 Single-capped fluorescent lamps Safety specifications IEC 61199:2011 EN 61199:2011/A1:2013 IEC 61199:2011/A1:2012 EN 61199:2011/A2:2015 IEC 61199:2011/A2:2014 Note Cenelec EN 61204:1995 Low-voltage power supply devices, d.c. output Performance characteristics IEC 61204:1993 (Modified) Cenelec EN :2006 Low voltage power supplies, d.c. output Part 7: Safety requirements IEC :2006 EN :2006/A11:2009 Note 3 Cenelec EN 61210:2010 Connecting devices Flat quick-connect terminations for electrical copper conductors Safety requirements IEC 61210:2010 (Modified)

119 EN Official Journal of the European Union C 209/117 Cenelec EN 61242:1997 Electrical accessories Cable reels for household and similar purposes IEC 61242:1995 (Modified) EN 61242:1997/A1:2008 IEC 61242:1995/A1:2008 EN 61242:1997/A2:2016 IEC 61242:1995/A2:2015 Note EN 61242:1997/A1:2008/AC:2010 Cenelec EN :2014 Live working Voltage detectors Part 3: Twopole low-voltage type IEC :2014 EN : EN :2014/AC:2015 EN :2014/AC:2015 Cenelec EN :1996 Capacitors for microwave ovens Part 1: General IEC :1996 Cenelec EN 61293:1994 Marking of electrical equipment with ratings related to electrical supply Safety requirements IEC 61293:1994 Cenelec EN :2008 Safety of machinery Indication, marking and actuation Part 1: Requirements for visual, acoustic and tactile signals IEC :2007 Cenelec EN :2008 Safety of machinery Indication, marking and actuation Part 2: Requirements for marking IEC :2007 Cenelec EN :2008 Safety of machinery Indication, marking and actuation Part 3: Requirements for the location and operation of actuators IEC :2007

120 C 209/118 EN Official Journal of the European Union Cenelec EN 61316:1999 Industrial cable reels IEC 61316:1999 Cenelec EN :2015 Lamp controlgear Part 1: General and safety requirements IEC :2015 EN : A1: A2: Cenelec EN :2012 Lamp controlgear Part 2-2: Particular requirements for d.c. or a.c. supplied electronic stepdown convertors for filament lamps IEC :2011 Cenelec EN :2011 Lamp control gear Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps IEC 6134 IEC :2011 EN :2011/AC:2011 Cenelec EN :2012 Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) IEC :2011 Cenelec EN :2001 Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps IEC :2000 EN :2001/A1: :2000/A1:2006 Note 3 EN :2001/AC:2003 EN :2001/AC:2010 Cenelec EN :2013 Lamp controlgear Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) IEC :2012

121 EN Official Journal of the European Union C 209/119 Cenelec EN :2001 Lamp controlgear Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) IEC :2000 EN :2001/A1:2009 IEC :2000/A1:2008 Note 3 EN :2001/AC:2010 Cenelec EN :2001 Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires IEC :2001 EN :2001/AC:2002 EN :2001/AC:2010 Cenelec EN :2005 Lamp controlgear Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) IEC :2005 EN :2005/A1:2010 IEC :2005/A1:2010 Note 3 EN :2005/AC:2010 Cenelec EN :2014 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules IEC :2014 EN : Cenelec EN :2008 Conduit systems for cable management Part 1: General requirements IEC :2008 Cenelec EN :2004 Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems IEC :2002

122 C 209/120 EN Official Journal of the European Union EN :2004/A11:2010 Note 3 EN :2004/AC:2004 Cenelec EN :2004 Conduit systems for cable management Part 22: Particular requirements Pliable conduit systems IEC :2002 EN :2004/A11:2010 Note 3 EN :2004/AC:2004 Cenelec EN :2004 Conduit systems for cable management Part 23: Particular requirements Flexible conduit systems IEC :2002 EN :2004/A11:2010 Note 3 EN :2004/AC:2004 Cenelec EN :2010 Conduit systems for cable management Part 24: Particular requirements Conduit systems buried underground IEC :2004 Cenelec EN :2011 Conduit systems for cable management Part 25: Particular requirements Conduit fixing devices IEC :2011 Cenelec EN :2011 Low-voltage switchgear and controlgear assemblies Part 1: General rules IEC :2011 Cenelec EN :2011 Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies IEC :2011 Cenelec EN :2012 Low-voltage switchgear and controlgear assemblies Part 3: Distribution boards intended to be operated by ordinary persons (DBO) IEC :2012

123 EN Official Journal of the European Union C 209/121 Cenelec EN :2013 Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS) IEC :2012 Cenelec EN :2015 Low-voltage switchgear and controlgear assemblies Part 5: Assemblies for power distribution in public networks IEC :2014 EN :2015/AC:2015 Cenelec EN :2012 Low-voltage switchgear and controlgear assemblies Part 6: Busbar trunking systems (busways) IEC :2012 Cenelec EN :2011 Powertrack systems Part 1: General requirements IEC 61 IEC :2011 EN :2011/A1:2014 IEC :2011/A1:2014 Note Cenelec EN :2014 Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting IEC :2014 EN : Cenelec EN :2014 Powertrack systems Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation IEC :2014 EN : Cenelec EN 61535:2009 Installation couplers intended for permanent connection in fixed installations IEC 61535:2009 (Modified) EN 61535:2009/A1:2013 IEC 61535:2009/A1:2012 Note 3

124 C 209/122 EN Official Journal of the European Union Cenelec EN 61537:2007 Cable management Cable tray systems and cable ladder systems IEC 61537:2006 Cenelec EN 61549:2003 Miscellaneous lamps IEC 61549:2003 EN 61549:2003/A1:2005 IEC 61549:2003/A1:2005 EN 61549:2003/A2:2010 IEC 61549:2003/A2:2010 EN 61549:2003/A3:2012 IEC 61549:2003/A3:2012 Note 3 Cenelec EN :2007 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 1: General requirements IEC :2007 Cenelec EN :2007 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 2: Insulation resistance IEC :2007 Cenelec EN :2007 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 3: Loop impedance IEC :2007 Cenelec EN :2007 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 4: Resistance of earth connection and equipotential bonding IEC :2007

125 EN Official Journal of the European Union C 209/123 Cenelec EN :2007 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 5: Resistance to earth IEC :2007 Cenelec EN :2007 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems IEC :2007 Cenelec EN :2007 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 7: Phase sequence IEC :2007 Cenelec EN :2013 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures IEC :2013 Cenelec EN :2009 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems IEC :2009 Cenelec EN :2008 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 12: Performance measuring and monitoring devices (PMD) IEC :2007

126 C 209/124 EN Official Journal of the European Union Cenelec EN :2011 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems IEC :2011 Cenelec EN :2013 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. Equipment for testing, measuring or monitoring of protective measures Part 14: Equipment for testing the safety of electrical equipment of machinery IEC :2013 Cenelec EN :2005 Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests IEC :2005 EN :2005/A1:2009 IEC :2005/A1:2009 Note 3 EN :2005/AC:2006 Cenelec EN :2007 Safety of power transformers, power supplies, reactors and similar products Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications IEC :2007 Cenelec EN :2007 Safety of power transformers, power supplies, reactors and similar products Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers IEC :2007

127 EN Official Journal of the European Union C 209/125 Cenelec EN :2010 Safety of transformers, reactors, power supply units and combinations thereof Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners IEC :2010 Cenelec EN :2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to V Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers IEC :2009 Cenelec EN :2010 Safety of transformers, reactors, power supply units and combinations thereof Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units IEC :2010 Cenelec EN :2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to V Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers IEC :2009 Cenelec EN :2007 Safety of power transformers, power supplies, reactors and similar products Part 2-7: Particular requirements and tests for transformers and power supplies for toys IEC :2007 (Modified) Cenelec EN :2010 Safety of transformers, reactors, power supply units and combinations thereof Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes IEC :2010

128 C 209/126 EN Official Journal of the European Union Cenelec EN :2011 Safety of transformers, reactors, power supply units and combinations thereof Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps IEC :2010 Cenelec EN :2011 Safety of transformers, reactors, power supply units and combinations thereof Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage IEC :2011 Cenelec EN :2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to V Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers IEC :2009 Cenelec EN :2013 Safety of transformers, reactors, power supply units and combination thereof Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers IEC :2012 Cenelec EN :2012 Safety of transformers, reactors, power supply units and combinations thereof Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations IEC :2011 Cenelec EN :2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units IEC :2009

129 EN Official Journal of the European Union C 209/127 EN :2009/A1:2013 IEC :2009/A1:2013 Note Cenelec EN :2011 Safety of transformers, reactors, power supply units and combinations thereof Part 2-20: Particular requirements and tests for small reactors IEC :2010 Cenelec EN :2010 Safety of transformers, reactors, power supply units and combinations thereof Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites IEC :2010 Cenelec EN :2013 Safety of transformers, reactors, power supply units and combinations thereof Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes IEC :2013 Cenelec EN :2012 Low-voltage surge protective devices Part 11: Surge protective devices connected to low-voltage power systems Requirements and test methods IEC :2011 (Modified) Cenelec EN :2001 Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks Performance requirements and testing methods IEC 616 IEC :2000 EN :2001/A1:2009 IEC :2000/A1:2008 (Modified) EN :2001/A2:2013 IEC :2000/A2:2012 Note 3 Cenelec EN :2007 Photovoltaic (PV) module safety qualification Part 1: Requirements for construction IEC :2004 (Modified)

130 C 209/128 EN Official Journal of the European Union EN :2007/A1:2012 IEC :2004/A1:2011 EN :2007/A2:2013 IEC :2004/A2:2013 EN :2007/A11:2014 Note Cenelec EN :2007 Photovoltaic (PV) module safety qualification Part 2: Requirements for testing IEC :2004 (Modified) EN :2007/A1:2012 IEC :2004/A1:2011 Note 3 Cenelec EN 61770:2009 Electric appliances connected to the water mains Avoidance of backsiphonage and failure of hose-sets IEC 61770:2008 EN 61770:2009/AC:2011 Cenelec EN :2007 Adjustable speed electrical power drive systems Part 5-1: Safety requirements Electrical, thermal and energy IEC :2007 Cenelec EN :2011 Time relays for industrial and residential use Part 1: Requirements and tests IEC :2011 Cenelec EN :2011 Electric vehicle conductive charging system Part 1: General requirements IEC :2010 Cenelec EN :2002 Electric vehicle conductive charging system Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply IEC :2001

131 EN Official Journal of the European Union C 209/129 Cenelec EN :2002 Electric vehicle conductive charging system Part 22: AC electric vehicle charging station IEC :2001 Cenelec EN :2014 Electric vehicle conductive charging system Part 23: DC electric vehicle charging station IEC :2014 Cenelec EN :2014 Electric vehicle conductive charging system Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging IEC :2014 EN :2014/AC:2015 Cenelec EN :2009 Instrument transformers Part 1: General requirements IEC :2007 (Modified) Cenelec EN :2012 Instrument transformers Part 2: Additional requirements for current transformers IEC :2012 Cenelec EN :2011 Instrument transformers Part 3: Additional requirements for inductive voltage transformers IEC :2011 Cenelec EN :2014 Instrument transformers Part 4: Additional requirements for combined transformers IEC :2013 EN :2014/AC:2014

132 C 209/130 EN Official Journal of the European Union Cenelec EN :2011 Instrument transformers Part 5: Additional requirements for capacitor voltage transformers IEC :2011 EN :2011/AC:2015 Cenelec EN 61914:2016 Cable cleats for electrical installations IEC 61914:2015 EN 61914: Cenelec EN 61921:2003 Power capacitors Low-voltage power factor correction banks IEC 61921:2003 Cenelec EN :2008 Devices for the connection of luminaires for household and similar purposes Part 1: General requirements IEC :2005 (Modified) Cenelec EN :2009 Devices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCL IEC :2009 Cenelec EN 62020:1998 Electrical accessories Residual current monitors for household and similar uses (RCMs) IEC 62020:1998 EN 62020:1998/A1:2005 IEC 62020:1998/A1:2003 (Modified) Note 3 Cenelec EN :2007 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 1: General rules IEC :2007 Cenelec EN :2013 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 2: Actuator sensor interface (AS-i) IEC :2008 (Modified)

133 EN Official Journal of the European Union C 209/131 Cenelec EN :2015 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 3: Device- Net IEC :2014 IEC :2014/COR1:2015 EN : Cenelec EN :2013 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 7: CompoNet IEC :2010 (Modified) Cenelec EN 62031:2008 LED modules for general lighting Safety specifications IEC 62031:2008 EN 62031:2008/A1:2013 IEC 62031:2008/A1:2012 EN 62031:2008/A2:2015 IEC 62031:2008/A2:2014 Note Cenelec EN 62035:2014 Discharge lamps (excluding fluorescent lamps) Safety specifications IEC 62035:2014 (Modified) EN 62035: A1: A2: Cenelec EN :2008 Uninterruptible power systems (UPS) Part 1: General and safety requirements for UPS IEC 62 IEC :2008 EN :2008/A1:2013 IEC :2008/A1:2013 Note 3 EN :2008/AC:2009 Cenelec EN 62080:2009 Sound signalling devices for household and similar purposes IEC 62080: A1:2008

134 C 209/132 EN Official Journal of the European Union Cenelec EN :2003 Indicator light units for household and similar fixed-electrical installations Part 1: General requirements IEC :2002 EN :2003/A11:2003 Note 3 Cenelec EN :2010 Safety of power converters for use in photovoltaic power systems Part 1: General requirements IEC :2010 Cenelec EN :2011 Safety of power converters for use in photovoltaic power systems Part 2: Particular requirements for inverters IEC :2011 Cenelec EN :2015 Resistance welding equipment Part 1: Safety requirements for design, manufacture and installation IEC :2015 EN : Cenelec EN :2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 1: General requirements IEC :2014 (Modified) EN : A11: A12: Cenelec EN :2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories IEC :2011 EN :2012/A11:2013 Note EN :2012/A12:2014 Note Cenelec EN :2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./ d.c. pin and contact-tube vehicle couplers IEC :2014

135 EN Official Journal of the European Union C 209/133 Cenelec EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies General requirements IEC 62208:2011 Cenelec EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure IEC 62233:2005 (Modified) EN 62233:2008/AC:2008 Cenelec EN 62253:2011 Photovoltaic pumping systems Design qualification and performance measurements IEC 62253:2011 Cenelec EN 62275:2015 Cable management systems Cable ties for electrical installations IEC 62275:2013 (Modified) EN 62275: Cenelec EN :2012 Fuel cell technologies Part 3-100: Stationary fuel cell power systems Safety IEC :2012 Cenelec EN :2012 Fuel cell technologies Part 3-300: Stationary fuel cell power systems Installation IEC :2012 Cenelec EN :2012 Fuel cell technologies Part 5-1: Portable fuel cell power systems Safety IEC :2012 Cenelec EN :2005 Static transfer systems (STS) Part 1: General and safety requirements IEC :2005 Cenelec EN 62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz 300 GHz) IEC 62311:2007 (Modified)

136 C 209/134 EN Official Journal of the European Union Cenelec EN :2014 Audio/video, information and communication technology equipment Part 1: Safety requirements (IEC :2014, modified) IEC :2014 (Modified) EN 60065:2014 EN : A11: A12: A1: A2: EN :2014/AC:2015 Cenelec EN :2013 Electrical resistance trace heating systems for industrial and commercial applications Part 1: General and testing requirements IEC :2013 Cenelec EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses IEC 62423:2009 (Modified) EN 62423: Cenelec EN 62444:2013 Cable glands for electrical installations IEC 62444:2010 (Modified) Cenelec EN 62471:2008 Photobiological safety of lamps and lamp systems IEC 62471:2006 (Modified) Cenelec EN :2012 Safety requirements for power electronic converter systems and equipment Part 1: General IEC :2012 EN :2012/A11:2014 Note Cenelec EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) IEC 62479:2010 (Modified) Cenelec EN 62493:2010 Assessment of lighting equipment related to human exposure to electromagnetic fields IEC 62493:2009 Cenelec EN 62532:2011 Fluorescent induction lamps Safety specifications IEC 62532:2011

137 EN Official Journal of the European Union C 209/135 Cenelec EN 62549:2011 Articulated systems and flexible systems for cable guiding IEC 62549:2011 Cenelec EN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications IEC 62560:2011 (Modified) EN 62560:2012/A1:2015 IEC 62560:2011/A1:2015 (Modified) Note EN 62560:2012/A1:2015/AC:2015 EN 62560:2012/AC:2015 Cenelec EN 62606:2013 General requirements for arc fault detection devices IEC IEC 62606:2013 (Modified) Cenelec EN :2014 Low-voltage switchgear and controlgear enclosed equipment Part 1: Enclosed switch-disconnectors outside the scope of IEC to provide isolation during repair and maintenance work IEC :2014 Cenelec HD 62640:2015 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses IEC 62640:2011 (Modified) Cenelec EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps Safety specifications IEC 62776:2014 IEC 62776:2014/COR1:2015 Cenelec EN 62868:2015 Organic light emitting diode (OLED) panels for general lighting Safety requirements IEC 62868:2014 ( 1 ) ESO: European standardisation organisation: CEN: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel Fax ( Cenelec: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel Fax ( ETSI: 650, route des Lucioles, Sophia Antipolis, FRANCE. Tel Fax ( Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal ( dow ), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

138 C 209/136 EN Official Journal of the European Union : The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. Note 3: NOTE: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 ( 1 ). Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. References to Corrigenda /AC:YYYY are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. More information about harmonised standards and other European standards on the Internet at ( 1 ) OJ C 338, , p. 31.

139 EN Official Journal of the European Union C 209/137 Commission communication in the framework of the implementation of Directive 2013/53/EU of the European Parliament and of the Council on recreational craft and personal watercraft and repealing Directive 94/25/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/05) ESO ( 1 ) Reference and title of the standard (and reference document) First publication OJ Reference of superseded standard Date of cessation of presumption of conformity of superseded standard Note 1 CEN EN ISO :2001 Inflatable boats Part 1: Boats with a maximum motor power rating of 4,5 kw (ISO :2001) CEN EN ISO :2001 Inflatable boats Part 2: Boats with a maximum motor power rating of 4,5 kw to 15 kw inclusive (ISO :2001) CEN EN ISO :2014 Inflatable boats Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kw and greater (ISO :2014) CEN EN ISO :2011 Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kw and greater (ISO :2011, Corrected version ) CEN EN ISO 7840:2013 Small craft Fire-resistant fuel hoses (ISO 7840:2013) CEN EN ISO :2018 Small craft Waste systems Part 1: Waste water retention (ISO :2018) This is the first publication EN ISO 8099: CEN EN ISO 8469:2013 Small craft Non-fire-resistant fuel hoses (ISO 8469:2013) CEN EN ISO 8665:2017 Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations (ISO 8665:2006) EN ISO 8665:

140 C 209/138 EN Official Journal of the European Union CEN EN ISO 8846:2017 Small craft Electrical devices Protection against ignition of surrounding flammable gases (ISO 8846:1990) EN 28846: CEN EN ISO 8847:2017 Small craft Steering gear Cable and pulley systems (ISO 8847:2004) EN ISO 8847: CEN EN ISO 8848:2017 Small craft Remote steering systems (ISO 8848:1990) EN 28848: CEN EN ISO 8849:2003 Small craft Electrically operated direct-current bilge-pumps (ISO 8849:2003) CEN EN ISO :1997 Small craft Seacocks and through-hull fittings Part 1: Metallic (ISO :1994) CEN EN ISO :2002 Small craft Seacocks and through-hull fittings Part 2: Non-metallic (ISO :2002) CEN EN ISO 9094:2017 Small craft Fire protection (ISO 9094:2015) CEN EN ISO 9097:2017 Small craft Electric fans (ISO 9097:1991) EN ISO 9097: CEN EN ISO 9775:2017 Small craft Remote steering systems for single outboard motors of 15 kw to 40 kw power (ISO 9775:1990) EN 29775: CEN EN ISO 10088:2017 Small craft Permanently installed fuel systems (ISO 10088:2013) EN ISO 10088: CEN EN ISO 10133:2017 Small craft Electrical systems Extra-lowvoltage d.c. installations (ISO 10133:2012) EN ISO 10133: CEN EN ISO 10239:2017 Small craft Liquefied petroleum gas (LPG) systems (ISO 10239:2014) EN ISO 10239:

141 EN Official Journal of the European Union C 209/139 CEN EN ISO 10592:2017 Small craft Hydraulic steering systems (ISO 10592:1994) EN ISO 10592: CEN EN ISO 11105:2017 Small craft Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997) EN ISO 11105: CEN EN ISO 11192:2005 Small craft Graphical symbols (ISO 11192:2005) CEN EN ISO 11547:1995 Small craft Start-in-gear protection (ISO 11547:1994) EN ISO 11547:1995/A1: Note 3 CEN EN ISO :2016 Small craft Determination of maximum propulsion power rating using manoeuvring speed Part 1: Craft with a length of hull less than 8 m (ISO :2016) EN ISO 11592:2001 CEN EN ISO 11812:2001 Small craft Watertight cockpits and quickdraining cockpits (ISO 11812:2001) CEN EN ISO :2000 Small craft Hull construction and scantlings Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO :2000) CEN EN ISO :2002 Small craft Hull construction and scantlings Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO :2002) CEN EN ISO :2002 Small craft Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO :2002) CEN EN ISO :2002 Small craft Hull construction and scantlings Part 4: Workshop and manufacturing (ISO :2002)

142 C 209/140 EN Official Journal of the European Union CEN EN ISO :2008 Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO :2008) EN ISO :2008/A1: Note 3 CEN EN ISO :2008 Small craft Hull construction and scantlings Part 6: Structural arrangements and details (ISO :2008) CEN EN ISO :2009 Small craft Hull construction and scantlings Part 8: Rudders (ISO :2009) EN ISO :2009/AC: CEN EN ISO :2012 Small craft Hull construction and scantlings Part 9: Sailing craft appendages (ISO :2012) CEN EN ISO 12216:2002 Small craft Windows, portlights, hatches, deadlights and doors Strength and watertightness requirements (ISO 12216:2002) CEN EN ISO :2017 Small craft Stability and buoyancy assessment and categorization Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO :2015) EN ISO : CEN EN ISO :2017 Small craft Stability and buoyancy assessment and categorization Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO :2015) EN ISO : CEN EN ISO :2017 Small craft Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6 m (ISO :2015) EN ISO : CEN EN ISO 13297:2014 Small craft Electrical systems Alternating current installations (ISO 13297:2014)

143 EN Official Journal of the European Union C 209/141 CEN EN ISO 13590:2003 Small craft Personal watercraft Construction and system installation requirements (ISO 13590:2003) EN ISO 13590:2003/AC: CEN EN ISO 13929:2017 Small craft Steering gear Geared link systems (ISO 13929:2001) EN ISO 13929: CEN EN ISO :2008 Small craft Airborne sound emitted by powered recreational craft Part 1: Pass-by measurement procedures (ISO :2008) CEN EN ISO :2009 Small craft Airborne sound emitted by powered recreational craft Part 3: Sound assessment using calculation and measurement procedures (ISO :2009) CEN EN ISO 14895:2016 Small craft Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016) EN ISO 14895:2003 CEN EN ISO 14946:2001 Small craft Maximum load capacity (ISO 14946:2001) EN ISO 14946:2001/AC: CEN EN ISO 15083:2003 Small craft Bilge-pumping systems (ISO 15083:2003) CEN EN ISO 15084:2003 Small craft Anchoring, mooring and towing Strong points (ISO 15084:2003) CEN EN ISO 15085:2003 Small craft Man-overboard prevention and recovery (ISO 15085:2003) This is the first publication EN ISO 15085:2003/A1:2009 This is the first publication EN ISO 15085:2003/A2:2018 This is the first publication CEN EN ISO 15584:2017 Small craft Inboard petrol engines Enginemounted fuel and electrical components (ISO 15584:2001) EN ISO 15584:

144 C 209/142 EN Official Journal of the European Union CEN EN 15609:2012 LPG equipment and accessories LPG propulsion systems for boats, yachts and other craft CEN EN ISO 15652:2017 Small craft Remote steering systems for inboard mini jet boats (ISO 15652:2003) EN ISO 15652: CEN EN ISO 16147:2017 Small craft Inboard diesel engines Enginemounted fuel and electrical components (ISO 16147:2002, including Amd 1:2013) EN ISO 16147: CEN EN ISO 16180:2013 Small craft Navigation lights Installation, placement and visibility (ISO 16180:2013) CEN EN ISO 16315:2016 Small craft Electric propulsion system (ISO 16315:2016) CEN EN ISO 18854:2015 Small craft Reciprocating internal combustion engines exhaust emission measurement Testbed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) CEN EN ISO 19009:2015 Small craft Electric navigation lights Performance of LED lights (ISO 19009:2015) CEN EN ISO 21487:2012 Small craft Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) EN ISO 21487:2012/A1: Note 3 EN ISO 21487:2012/A2: Note 3 CEN EN ISO 25197:2012 Small craft Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012) EN ISO 25197:2012/A1: Note 3 Cenelec EN :2015 Electrical installations in ships Part 507 Small vessels IEC : ( 1 ) ESO: European standardisation organisation: CEN: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel Fax ( Cenelec: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel Fax ( ETSI: 650, route des Lucioles, Sophia Antipolis, FRANCE. Tel Fax , (

145 EN Official Journal of the European Union C 209/143 Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal ( dow ), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. : The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. Note 3: NOTE: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 ( 1 ). Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. References to Corrigenda /AC:YYYY are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. More information about harmonised standards and other European standards on the Internet at: ( 1 ) OJ C 338, , p. 31.

146

147

148 ISSN X (electronic edition) ISSN (paper edition) EN