AN-3100D Annunciator

Transcription

1 AN-3100D Annunciator FOR POWER GENERATION, TRANSMISSION & DISTRIBUTION, PETROLEUM, PETROCHEMICAL, AND OTHER PROCESS INDUSTRIES INNOVATIVE ANNUNCIATOR Continuing with the widely successful AN-3100 series of annunciators, AMETEK s new AN-3100D brings alarm monitoring to new levels. Time stamped alarms and more communication options are now available. Installation and setup have been simplified making this an ideal fit for new projects or system replacements. The unique software configuration provides more features and functions a mouse click away. Time Stamped Alarms (SER) All of your alarms can include a time stamp, synchronized by IRIG-B or our internal clock. This can be presented through Modbus, DNP, OPC or to a local printer or terminal for viewing. Communications Transmit or receive alarms using our RS-232/485 serial or Ethernet port. The AN-3100D supports Modbus and DNP protocols. Communicate via OPC using our OPC Server Software. Software Configuration While all systems are pre-configured to your specifications, the software configuration tool unleashes the true power of the AN-3100D. You can select any operational sequence, sort alarms by group, configure your relay outputs and more. There is never any reason to pull out the front accessible input cards as changes can be made via software. Compact Size The annunciator and all electronics including the communication options are self contained within a compact frame less than seven inches deep. In most cases, the power supply is included inside the system simplifying installation and wiring. Reliability Every AN-3100D annunciator is equipped with low power, long life LEDs. The brightness exceeds standard incandescent bulbs and they last years longer. If a LED needs replacement, our automatic detector provides notice so critical alarms are not missed. A built-in ground fault detector is available for indicating ground faults in your field wiring. Flexible Design The window legends are printed on standard transparency film, making it easy to change legends at any time. The annunciator capacity can be increased with built-in expansion. All features and options are field selectable and upgradeable. FEATURES AND BENEFITS Timed Stamped Alarms (SER) LED Illumination (Standard) Serial and Ethernet Communications: Modbus, DNP, OPC Protocols Software Configurable Laser Printed Legends Internal Self Diagnostics Compact Size Experience the Power

2 SPECIFICATIONS INPUT Field Contacts Normally Open (N.O.) or Normally Closed (N.C.) input selection through software or hardware Wetted (voltage supplied) or dry (voltage free) contacts Field Contact Voltage 12, 24, 48, 125 VDC, 120 VAC jumper selectable (.0018mA per input) Input Isolation Each input is optically isolated Input Response 50 milliseconds (standard) 1 millisecond fast response (opt) 50 milliseconds to 250 seconds software adjustable DISPLAY LED White LED, minimum 2 per window Window Sizes (h x w) Quad: 1.5 x 1.5 inch (38 x 38 mm) Third: 1.0 x 3.0 inch (25 x 76 mm) Half: 1.5 x 3.0 inch (38 x 76 mm) Full: 3.0 x 3.0 inch (76 x 76 mm) Window Color White, red, yellow, amber, green, blue Legends Laser printed on transparency film or engraved windows ALARM SEQUENCE Sequence Selections A, A4, M, R, R12, F1A, F3A, F2M1, FFAM2, F3C and R12C Software configurable - Dual color sequences - Customized flash rates - Up to 4 first out groups CONTROLS Integral test, acknowledge, silence and reset with LED status lights External push button inputs Configurable switch inputs (inhibit LEDs, horns, relays) OUTPUTS Auxiliary Relay Option Individual or dual relay per point Follows field contact or alarm sequence Software configurable Energized/de-energized operation Form A or form B (N.O. or N.C.) Form C (SPDT) Common Relays 2 relays included for: critical and noncritical horn; ringback audible 2 relays available for: critical and noncritical reflash, common alarm; watchdog, power fail, ground fault Software configurable Energized or de-energized operation Form A or form B (N.O. or N.C.) Relay Ratings amps amps amps Audible Internal 30cm audible device external horns available COMMUNICATION Serial Modbus Master or slave Transmit or receive alarms RS-232/485 or Ethernet Pushbutton controls DNP 3.0 Slave mode Transmit alarms RS-232/485 or Ethernet Pushbutton controls OPC Server Software Ver. 2.0 OPC DA Serial ASCII RS-232/485 or Ethernet For local terminal/printer TIME STAMPED ALARMS 1 or 4 msec time stamp resolution IRIG-B time sync input or internal clock Point #, alarm status, time and date Modbus, DNP, ASCII outputs 500 event storage CONNECTIONS Input/Output Terminals Fixed barrier terminal block, 12 GA (2.5mm) maximum, ring, spade or bare wire termination. Communication Ports Serial: 9 pin female D connector Ethernet: RJ45 connector IRIG-B: BNC connector POWER REQUIREMENTS Internal or External Power Supplies 230 VAC ( VAC 50 Hz) 120 VAC ( VAC 60 Hz) 125 VDC ( VDC) 48 VDC (38-58 VDC) 24 VDC (19-29 VDC) Max. 1.7 power input MECHANICAL Mounting Semi-flush panel mounting 19 inch rack mounting Wall (surface) mounting NEMA enclosures Weight 1.2 lbs per cell (0.34 kg per cell) ENVIRONMENT Operating Temperature Range: -4 to 122 O F (-20 to 50 O C) Humidity: 20-95% RH Surge Withstand: ANSI C (oscillatory) Fast Transient: IEC Surge Immunity: IEC EMI/RFI/ESD: IEC , 4-6, 6-3, 4-8, 4-2 Isolation: 1950 VDC or 1400 VAC input to output, logic, case CERTIFICATIONS CE, FM Class 1, Div 2, FMC UL, ULC, CSA Pending Semi-flush Mounting Details inches (mm) Cells Overall Panel Cut-Out H or W H or W H or W (127) 4.06 (103) (215) 7.53 (191) (303) (279) (391) (368) (479) (456) (568) (544) (656) (632) (744) (720) (832) (808) (920) (896) (1008) (984) (1096) (1072) (1184) (1160) Depth behind panel: 6.75", 8" with rear cover Example: 2 H x 3 W has a cut-out height of 7.53 (191) and a cut-out width of 11.0 (279) For customer support call: POWER INSTRUMENTS 255 North Union Street Rochester, NY Tel: Fax: HEADQUARTERS AMETEK Power Instruments 50 Fordham Road Wilmington, MA Tel: Fax: EUROPEAN HEADQUARTERS Unit 20, Ridgeway Donibristle Industrial Estate Dalgety Bay, Dunfermline, KY119JN Scotland U.K. Tel: Fax: ASIA PACIFIC HEADQUARTERS 10 Ang Mo Kio Street 65 #05-12 Techpoint Singapore Tel: Fax: ISO 9001 Certified 2005, by AMETEK, Inc. All rights reserved. 3M804A (210075)

3 D I S T R I B U T E D A L A R M M A N A G E M E N T DMS-3000 Modular Alarm System FOR SAFETY CRITICAL ALARM AND EVENT LOGGING ON PROCESS AND POWER PLANTS MODULAR ALARM SYSTEM The AMETEK DMS-3000 Alarm Management System is a flexible remote alarm monitoring system.it can operate as a remote annunciator, with all inputs connected to our compact card rack and the lamp displays installed wherever convenient. Or it can combine the annunciation with sequential events recording and provide a 1 msec time stamp on all alarms. All of this alarm inform-ation can be transmitted through our serial ports using Modbus and OPC. Each input card rack can accept analog or digital contact inputs. Any of these inputs or groups of inputs can be used to drive an annunciator lamp, repeat relay, horn, or common alarm output. The DMS-3000 works well in distributed applications as each input card rack can be located close to the field inputs. All of these card racks are connected to a Data Concentrator via long length RS-422 cables up to 1,000 meters. The Data Concentrator provides a common time synchronization for all inputs and collects all the alarm information at one common point, for transmission to other systems using serial modbus. Managing these alarms is easily accomplished with our RiSCue Alarm Management Software. RiSCue organizes all of the alarms in a descriptive text format or can even simulate the annunciator windows used. RiSCue also provides automatic notification through the phone, pager, public address system, , fax, and more. Critical alarms are easily sorted by priority or time of occurrence making it easy to determine the root cause of any disturbance. FEATURES AND BENEFITS Remote Annunciator - Ideal when alarm inputs remote are separate from the control room display Sequence of Events Recorder - Time stamping of alarms with 1 msec resolution Multifunction capability from single alarm input - Saves on installation, wiring, hardware cost High Density System - Up to 128 digital or 32 analog inputs per 19 inch rack Multiplex inputs to outputs - Multiple inputs can drive a single display window Distributed Architecture - Input card racks can be located up to 1,000 meters away Modbus and OPC Outputs - Communicate alarm information to other systems RiSCue Alarm Management Software - Windows-based, network ready Experience the Power

4 D I S T R I B U T E D A L A R M M A N A G E M E N T SPECIFICATIONS INPUTS Digital Contacts N.O. or N.C., field selectable via internal DIP switches Input Current Approximately 2mA per input Field Contact Voltage 24 VDC nominal 48 VDC nominal 125 VDC nominal Analog Inputs 4-20mA and 1-5 VDC Input Loop Resistance N.O. 200K ohm minimum N.C. 1K ohm maximum Time Stamp Resolution 1mS on occurrence and 1mS on clearance between digital events when accessed with a data concentrator or Modbus Input Response Digital input: 16mS Analog input: 40mS System Capacity 128 digital inputs per remote unit or 32 analogs or combination of both OUTPUTS Lamp Drive 24 VDC, 5 watts Power Relays S.P.D.T contact rating 24 VDC 2.0 amp resistive. 240 VAC 1.0 amp resistive Reed Relays S.P.S.T contact rating 100 VDC 0.25 amp maximum resistive Capacity 224 outputs per remote unit Diagnostic Watchdog output COMMUNICATIONS CPU for Remote Annunciator Systems used for system configuration, optional Modbus CPU for Combined Annunciator and Sequential Events Recording Systems used for communication to Data Concentrator Serial Data RS232/RS422 Baud Rates Up to (9600 standard) Communications Full duplex, 8 bit, 1 stop bit, no parity Distance between Input Card Rack and Data Concentrator RS ft./15 M RS-422 4,000 ft./1,200 M CONFIGURABLE FEATURES Editor Onboard accessed through RS232 port Input Time Delays 0.04 seconds to 40 minutes in approximately 40mS increments Flash Rates Fast 80/140 per minute Slow 15/25 per minute Sequences All sequences to IAS-S Pushbutton Controls 16 Groups can be assigned and configured for controls functions. - Alarm Accept - Lamp Test - First Up Accept - Reset - Function Test - Horn Silence Audible 16 alarm audibles 1 ringback audible General Groups 1 global group 15 individual groups Inhibit Individual and group available DATA CONCENTRATOR Time Synchronization IRIG-B, PPS Serial Inputs RS-232/422 serial link from input card racks 2048 inputs per data concentrator Up to 16 input card racks Outputs RS-232/422/485 Serial Output Single or dual outputs Protocols TADS (Timed Alarm Data System) Serial Modbus (through converter) OPERATING VOLTAGES Prime Power 24,48 and 125 Volts +12% 120/240 Volts AC 50/60 Hz MECHANICAL Input Card Rack Single Chassis, 10 card slots 5.5" H x 7.25" D x 19.0" W Dual Chassis, 23 card slots 11.5" H x 7.25" D x 19.0" W Data Concentrator Single Chassis, 10 card slots 5.5" H x 7.25" D x 19.0" W Mounting Front or rear optional Terminals Combined edge connector with terminal block - up to 1.5 sq mm VOLTAGE WITHSTAND Isolation IEC255-5 Surge Withstand IEC Impulse Withstand IEC Burst Immunity IEC RFI IEC ESD IEC Emissions EN ENVIRONMENTAL Operating Temperature 32 O to 140 O F (0 O to 60 O C) Storage Temperature -13 O to 185 O F (-25 O to 85 O C) Humidity 0 to 90% non-condensing For customer support call: POWER INSTRUMENTS 255 North Union Street Rochester, NY Tel: Fax: power.industrial@ametek.com HEADQUARTERS AMETEK Power Instruments 50 Fordham Road Wilmington, MA Tel: Fax: power.industrial@ametek.com EUROPEAN HEADQUARTERS Unit 20, Ridgeway Donibristle Industrial Estate Dalgety Bay, Dunfermline, KY119JN Scotland U.K. Tel: Fax: sales@ametekuk.com ASIA PACIFIC HEADQUARTERS 10 Ang Mo Kio Street 65 #05-12 Techpoint Singapore Tel: Fax: ISO 9001 Certified 2003, by AMETEK, Inc. All rights reserved. XM1002 (XXXXXX)

5 AN-6150 Modular Display Unit FOR POWER GENERATION, TRANSMISSION AND DISTRIBUTION, PETROLEUM, PETROCHEMICAL, AND OTHER PROCESS INDUSTRIES COMPACT LAMP-BOX The Model AN-6150 is a compact, modular lamp display used for connection to remote logic annunciators, PLC s or other equipment. It can be configured in any matrix up to 5 cells high and 4 cells wide. It has four standard window sizes allowing you to compact as many alarms as needed in your allowable panel space. Six window colors are available which can be back lighted by incandescent lamps. Alternatively, LED lamps are available to meet long life requirements. Legends are laser printed on clear transparencies to allow changes to be done by the customer. Pushbutton membrane switches can also be added for Silence, Test, Acknowledge, and Reset functions. These units come standard with flush panel mounting, including hardware and rear terminal block field connections. Please refer to ordering information for additional options. WINDOW COLORS Red, amber, yellow, green, blue, white illuminated by incandescent lamps. Red, amber, green illuminated by LED clusters. LEGEND Laser printed on clear film or engraved filters. Secret window until lit and secret legends optional. ILLUMINATION #656 wedge type bulb, long life, 28 volt, 0.06 Amp filament lamp or equivalent. Dual lamps in all window sizes. Dual lamps are optional in small window size. Optional illumination by LED cluster each 24 volt, amp with limited colors. WINDOW SIZES Four standard sizes. Small: 0.98 in. x 1.14 in. (25 mm x 29 mm) Medium: 0.98 in. x 2.40 in. (25 mm x 61 mm) Large: 2.13 in. x 2.40 in. (54 mm x 61 mm) Ex Large: 2.13 in. x 4.96 in. (54 mm x 126 mm) FEATURES AND BENEFITS Low Cost Visual Display Configurable in 4 Standard Window Sizes Compact High-density Design Laser Printed Legends Easy Installation and Maintenance Sizing Details: in. (mm) Number of Cells Wide Bezel Width (144) (274) (404) (534) - Cut-out Width (138) (268) (398) (528) - Number of Cells High Bezel Height (72) (130) (188) (246) (305) Cut-out Height (66) (124) (182) (241) (299) Allow 2.25 depth behind panel Experience the Power

6 SPECIFICATIONS CONSTRUCTION Modular interlocking matrix configuration, multiples of standard DIN size 72 mm x 144 mm (2.83 in. x 5.67 in.) cells up to 5 cells high by 4 cells wide MOUNTING Flush panel mount or standard 19 inch rack panel mount for 3 cell wide display only CONNECTIONS Ribbon cable or terminal block accepting maximum wire size 16 AWG AMBIENT WORKING TEMPERATURE 14 O to 122 O F (-10 O to 50 O C) RECOMMENDED WORKING VOLTAGE 24 volts +10% for increased lamp life with 28 volt lamp POWER REQUIREMENTS Each cell has a total of 8 plug-in filament lamps or LED clusters. Power required per cell: 28 volt lamp Working at 24 volts: 0.5 amp, 12 watts, 24 volt LED cluster working at 24 volts: 0.2 amp, 4.8 watts CONTROL MODULE SILENCE, TEST, ACKNOWLEDGE, and RESET membrane pushbuttons within a large size window (54 mm x 61 mm 1/2 cell size) (2.13 in. x 2.40 in.) including internal audible device and visual power on indicator WEIGHT 0.48 lbs. (0.22 kg) per cell AN6150 Ordering Information TYPICAL MODEL NUMBER (coded by color) AN6150-3H-5W INTB S VW 48A R STH Code Description AN6150-X-Y X = Display Height Y = Display Width Common Service Module INTB Integral CSM wit Pushbuttons (touch pad mounted in the lower right cells) RPB Remote Panel Mounted CSM (with pushbuttons) NPB No Pushbutton Window Size S Small Window, 8 per Cell (0.98" x 1.14") M Medium Window, 4 per Cell (0.98" x 2.40") L Large Window, 2 per Cell (2.13" x 2.40") EL Extra Large Window, per Cell (2.13" x 4.96") IMW Intermix Window Size, Matrix Must Be Included Window Type VW Legends Are Laser Printed on Transparency Film (standard) SW Laser Printed Legends Are Hidden Until Lit (not available in LEDs) VL Legends Are Engraved on Windows SL Legends Are Hidden Until Lit, Engraved on Windows Lamp Type 24C Incandescent Lamps, 24 VDC 24W White LED Cluster Lamps, 24 VDC 24R Red LED Cluster Lamps, 24 VDC 24A Amber LED Cluster Lamps, 24 VDC 24Y Yellow LED Cluster Lamps, 24 VDC 24B Blue LED Cluster Lamps, 24 VDC 24G Green LED Cluster Lamps, 24 VDC 48W White LED Cluster Lamps, 48 VDC 48R Red LED Cluster Lamps, 48 VDC 48A Amber LED Cluster Lamps, 48 VDC 48Y Yellow LED Cluster Lamps, 48 VDC 48B Blue LED Cluster Lamps, 48 VDC 48G Green LED Cluster Lamps, 48 VDC Window Color R Red Window Y Yellow Window G Green Window A Amber Window W White Window B Blue Window (not available when using LEDs) IMC Intermix Window Color, Matrix Must Be Included Standard Options STD/1 19" Rack Mounting for 1 High x 3 Wide Displays STD/2 19" Rack Mounting for 2 High x 3 Wide Displays STD/3 19" Rack Mounting for 3 High x 3 Wide Displays STD/4 19" Rack Mounting for 4 High x 3 Wide Displays STD/5 19" Rack Mounting for 5 High x 3 Wide Displays STD/6 19" Rack Mounting for 6 High x 3 Wide Displays STD/X 19" Rack Mounting for Units Higher than 6 High STY Integral Plug Connector, 32 Points per Plug STH Integral Control Pushbuttons NR No Options Required For customer support call: POWER INSTRUMENTS 255 North Union Street Rochester, NY Tel: Fax: HEADQUARTERS AMETEK Power Instruments 50 Fordham Road Wilmington, MA Tel: Fax: EUROPEAN HEADQUARTERS Unit 20, Ridgeway Donibristle Industrial Estate Dalgety Bay, Dunfermline, KY119JN Scotland U.K. Tel: Fax: ASIA PACIFIC HEADQUARTERS 10 Ang Mo Kio Street 65 #05-12 Techpoint Singapore Tel: Fax: ISO 9001 Certified 2005, by AMETEK, Inc. All rights reserved. 5M703A (210064)

7 AN-6100C Annunciator FOR POWER GENERATION, TRANSMISSION AND DISTRIBUTION, PETROLEUM, PETROCHEMICAL, AND OTHER PROCESS INDUSTRIES ALARM MONITORING SYSTEM AMETEK s AN-6100C Annunciator has all the features you need for an alarm monitoring system. Simple to install, configure and operate and flexible to change, expand and grow to meet future requirements. The AN-6100C has all these qualities along with reliable operation for your most critical needs. The AN-6100C is maintenance free; once installed, you will never have to worry about it. COMPACT DESIGN With a depth less than 4-1/2", it can be easily installed into control panels, system cabinets and consoles. It is an ideal fit for replacing older systems or for new installations. The high density design provides up to 44 alarms in just 80 square inches of panel space FLEXIBLE CONFIGURATION Create any system size up to 10 rows by 20 columns of windows. Four windows sizes are available in several colors. The large windows can easily be converted into smaller ones, providing instant expansion for the future. HIGH RELIABILITY Each AN-6100C annunciator is equipped with low power, long life white LEDs. Each alarm point uses a pair of LEDs providing ample illumination in all light conditions. You never have to worry about changing a lamp or having it fail when you need it the most. MULTI-FUNCTION All features and options are provided in a single model, making it easy to order or to change in the future. Our innovative software configuration tool is used to change any system parameter, such as: ISA alarm sequence, alarm grouping, input delays, or relay operation. SERIAL COMMUNICATION Alarm information is easily transmitted or received with the bi-directional serial Modbus communications. The RS-232/485 serial communications can act as a slave or master providing control or monitoring of the alarm information. FIELD CHANGEABLE The window legends are printed on standard transparency film, making it easy to change legends at any time. Even options like serial Modbus can be added in the future through a factory supplied password. FEATURES AND BENEFITS Compact design Minimal depth behind panel Bi-directional serial communications LED illumination Multi-function Software configured Laser printed legends Removable terminal blocks Experience the Power

8 SPECIFICATIONS INPUT Field Contacts Normally Open (N.O.) or Normally Closed (N.C.) input selection through DIP Switch Wet (voltage supplied) or dry (voltage free) contacts Field Contact Voltage 5, 24, 48, 125 VDC, 120 VAC/DC 24 VDC open collector 24 VDC provided by annunciator power supply. Other voltage customer supplied. Input Isolation Each input is optically isolated Inputs share common return* *120 VAC/125 VDC input option provides isolation input to input Input Response 50 milliseconds (nominal) Adjustable to 2 seconds DISPLAY LED Dual white LED, 24 VDC Window Sizes Small: 0.98 x 1.14 in. (25 x 30 mm) Medium: 0.98 x 2.40 in. (25 x 60 mm) Large: 2.13 x 2.40 in. (55 x 60 mm) Extra Large: 2.13 x 4.96 in. (55 x 125 mm) Window Color White, red, yellow, amber, green, blue Legends Laser printed on transparency film OUTPUTS Auxiliary Relay Option Individual relay per point Follows field contact or alarm sequence Energized or de-energized Form A or Form B (N.O. or N.C.) Common Relays Four relays selectable for: - Critical and non-critical: horn, reflash, common alarm - Ringback audible, watchdog Energized or de-energized Form A or Form B (N.O. or N.C.) Relay Ratings amps amps amps Audible Internal 80db audible device SERIAL MODBUS OPTION RS-232 or RS-485 Modbus RTU or ASCII Master or slave mode Monitor mode (alarm information transmitted externally) Actuate mode (alarm information received externally) Pushbutton controls CONNECTIONS Input/Output Terminals Two-part removable screw type Maximum wire size: 12 AWG (2.5 mm) Communication Port 9 Pin Female D connector POWER REQUIREMENTS Operating Range: 24 VDC +15% Burden: 7.5 VA per 8 inputs External Power Supply Options: VAC 50/60 Hz VDC VDC MECHANICAL Display Module (cell) 2.83 H x 5.67 W (72 x 144 mm) 1, 2, 4, 8 windows per cell Weight 0.85 lb. per cell (0.4 kg per cell) ENVIRONMENT Operating Temperature Range: -4 to 122 O F (-20 TO 50 O C) Humidity: 20-95% RH Surge Withstand: ANSI C Isolation: 1950 VDC or 1400 VAC input to output/ case/common, output to case/common CERTIFICATIONS CE, UL, ULC ALARM SEQUENCE Sequence Selections ISA-A, A4, A456, M, R12, F1A, F2M, FFAM2, F3A, R12C, F3C Dual color sequences Customized flash rates Up to 4 first out groups CONTROLS Integral Test, Acknowledge, Silence and Reset External Pushbutton Inputs Annunciator Mounting Details in. (mm) Number of Cells Wide Bezel Width (148) (279) (410) (541) (671) Cut-out Width (140) (270) (401) (532) (663) Number of Cells High Bezel Height (76) (134) (193) (251) (310) Cut-out Height (68) (126) (184) (243) (301) Allow 4.5" depth behind panel For customer support call: POWER INSTRUMENTS 255 North Union Street Rochester, NY Tel: Fax: HEADQUARTERS AMETEK Power Instruments 50 Fordham Road Wilmington, MA Tel: Fax: EUROPEAN HEADQUARTERS Unit 20, Ridgeway Donibristle Industrial Estate Dalgety Bay, Dunfermline, KY119JN Scotland U.K. Tel: Fax: ASIA PACIFIC HEADQUARTERS 10 Ang Mo Kio Street 65 #05-12 Techpoint Singapore Tel: Fax: ISO 9001 Certified 2005, by AMETEK, Inc. All rights reserved. 5M405CW (210063)