1 Instruction Manual AcuRite Atlas Indoor Display model 06061
2 How It Works AcuRite Atlas is an environmental monitoring station that delivers key information on current outdoor conditions in your exact location. The outdoor device contains sensors that read temperature, humidity, wind speed and direction, rainfall, UV, light intensity, and optionally lightning (requires optional Lightning Detection Sensor; may be purchased separately). These readings are transmitted over a 433 MHz wireless radio frequency (RF) to be received by the AcuRite Atlas indoor touch screen display. Package Contents AcuRite Atlas TM Indoor HD Display AC Power Adapter for Display Wall Mounting Bracket (optional) NOTE: To view your outdoor readings online from My AcuRite an AcuRite Access is required; may be purchased separately. 2
3 Copyright Chaney Instrument Co. Set Up Your Indoor Display 1 Plug In Plug in the power adapter. Once the display is powered on, it will help guide you through the next steps. POWER ON 2 Lift Antenna On the top of the display, lift the antenna for optimal signal reception. 3 Install Batteries In the battery compartment of the AcuRite Atlas TM outdoor device, install four AA alkaline or lithium batteries. Lithium batteries are recommended in low temperature conditions, especially below -4 o F / -20 o C. Note: Heavy duty or rechargeable batteries are not recommended. 3
4 4 Mount Outdoor Device 5 For more details on outdoor device setup and placement, see the outdoor device instruction manual. Set Up Display Follow the on-screen prompts to set the time, date, and units of measurement. 1. Find a suitable place to mount the outdoor device: At least 5 feet (1.5 meters) off the ground Rear solar panel facing south Away from heat and humidity sources SOUTH OR Select Your Time Zone U.S. - Central Standard next Level for accurate rain reporting 2. Remove rain gauge stabilizer from outdoor device. REMOVE 4
5 How To Add An Outdoor Device To view your AcuRite outdoor device readings from an indoor display, the device must be added to the display. Note: This procedure is also required to be completed if you are replacing an outdoor device. 1. Verify the outdoor device is powered on. 2. From the top-left section of the indoor display, select the Menu icon ( ) 3. Select Sensors. Note: If you re replacing an outdoor device, select Remove A Sensor and remove the batteries and power from the outdoor device that is being replaced. 4. Select Add A New Sensor. The indoor display searches for any outdoor devices in wireless range. This may take a couple minutes. 5. Once the outdoor device has been located, select Add A Sensor. If more than one outdoor device has been detected, you may need to scroll up and down to select the appropriate device. 5
6 Features & Settings Outdoor temperature Wind last reading, wind direction arrow, two minute average, today s peak Ticker Menu Select to view monthly records, configure alarms, or set preferences 12 to 24 Hour Animated Weather Forecast Records Rainfall today s rainfall, rainfall rate, accumulated rainfall for current week, and month, and year to date SD card indicator Indicates an SD card is currently inserted in the display to log data 6 Display settings volume, brightness, sleep mode Indoor temperature & humidity Current date & time
7 Time And Date Settings You can set the indoor display s time and date settings, including the time zone, Daylight Saving Time, and the time and date format. How To Set Time and Date Formats 1. From the top-left section, select the Menu icon ( ). 2. Select Setup. 3. From the time and date setting section, set the settings. Follow the on-screen instructions. 4. Select Save. Note: The selected hour determines whether the time is a.m. or p.m. Unit Of Measurement Settings You can set the unit of measurement displayed for barometric pressure, temperature, wind direction, wind speed, rainfall, and lightning distance. How To Change Unit Of Measurement Settings 1. From the top-left section, select the Menu icon ( ). 2. Select Units. 3. Select the unit setting(s). 4. Select Save. Display Appearance Settings You can set the indoor display s brightness, contrast and tint levels, backlight dimming and sleep mode, and how often the display rotates between the main screen and records. How To Change Display Appearance Settings 1. From the top-left section, select the Menu icon ( ). 2. Select Display. 3. Adjust the display settings: Adjust Display set the display s brightness, contrast and tint levels. Display Mode set how often the display rotates between the main screen and the records screen. Backlight set the backlight, auto-dim, and sleep mode settings. 7
8 Charts & Monthly Records The indoor display stores in its local memory the last 48 hours of readings that are displayed in charts and the monthly reading records. Charts Available for Indoor and Outdoor Temperature and Humidity, Barometric Pressure, Light Intensity, UV, Wind Speed, Lightning, and Rainfall. Monthly Reading Records Shows high, low, and accumulation reading records by month. How To View A 6 Or 48-Hour Reading Chart 1. From the main screen, select a reading type. 2. From the top-section of the screen, select last 48 hours or last 6 hours. How To View Monthly Reading Records 1. From the top-left section, select the Menu icon ( ). 2. Select Records > Calendar. 3. To change the month displayed, use the left or right arrow to select a month. How To Delete Today s Records You can delete the current day s readings this feature is commonly accessed when inaccurate readings occur during the setup procedure or due to outdoor device mounting changes. 1. From the top-left section, select the Menu icon ( ). 2. Select Records. 3. Select Clear Today s Records. Today s records for all reading types are permanently deleted. Save Extended Historical Readings (Optional SD Card) The indoor display stores the last 48 hours of readings in its local memory. If you want to save detailed historical readings, you can automatically log the readings on an SD Card (not supplied). The indoor display can use an SD Card with up to 32 GB of space. Readings are saved to the SD Card every 10 seconds. Calibrations made to readings on the 8 readings sent to the SD Card.
9 ALARMS Alarms provide a quick and easy way to know when a condition you are monitoring has reached a certain threshold. When a condition set in an alarm is reached, the indoor display activates an an audible alarm and a display. About The Alarm Features Alarms can be set for temperature, humidity, rainfall, wind speed, time, and forecasted storms. Set the audible alarm volume or set the volume to off. Set a single alarm or all alarms to be disabled for those times you do not want to be disturbed. How To Set An Alarm 1. From the top-left section, select the Menu icon ( ). 2. Select Alarms. 3. Select Indoor on readings taken by the display. Select Outdoor readings taken by the outdoor device. 4. Using the left and right arrows, select an alarm type > select Next. 5. Set the condition that activates the alarm. When the condition is reached, 6. Verify the alarm icon is set to ON. 7. Select Save and Exit. low alarm ON How To Adjust The Alarm Volume 1. From the bottom-left of the display, locate the alarm volume icon. 2. To adjust the alarm volume, press the alarm volume icon to the desired level. To turn off the audible alarm, adjust the level until X is displayed. When set to alarm is active. How To Silence An Active Alarm 1. Push anywhere on screen to clear the trigger again the next time the parameter is reached. 2. Press the button twice to disable the alarm. The alarm press TWO TIMES to turn off alarm will not trigger again unless it is turned back on in Alarm Settings. 9
10 How To Disable A Single Alarm 1. From the top-left section, select the Menu icon ( ). 2. Select Alarms. 3. Select Indoor alarms on readings taken by the display. Select Outdoor alarms on readings taken by the outdoor device. 4. Using the left and right arrows, select the reading type of the alarm to be disabled > select Next. 5. Select the alarm icon until it displays OFF. OFF How To Disable All Alarms 1. Select Alarms. 2. Select Indoor alarms on readings taken by the display. Select Outdoor alarms on readings taken by the outdoor device. 3. Using the left and right arrows, select Turn All Alarms Off. 4. Select Next. All alarms are disabled. 5. Select Save and exit. 10
11 READING CALIBRATIONS When placement or an environmental factor may impact temperature, humidity, or barometric pressure readings, setting a calibration adjustment can improve accuracy. Note: Calibration adjustments are only applied to readings displayed on the indoor display and stored on the optional SD card. If your outdoor device readings are also sent to My AcuRite, the calibration adjustments set in the indoor display are not sent to My AcuRite or Weather Underground. How To Set A Reading Calibration 1. From the top-left section, select the Menu icon ( ). 2. Select Calibrate. 3. Select Indoor to adjust readings taken by the display. Select Outdoor to adjust readings taken by the outdoor device. 4. Using the up and down arrows, select the reading type to be calibrated > select next. 5. Using the up and down arrows, set an adjustment. 6. To save the calibration adjustment, select done. Indoor Display Sensors TEMPERATURE RANGE Indoor : 32ºF to 122ºF; 0ºC to 50ºC HUMIDITY RANGE Indoor : 1-100% RH BAROMETRIC PRESSURE 16 to inhg 11
12 HAVING PROBLEMS? We re Here to Help. Visit us online Get more information or download the full AcuRite Atlas product manual. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit for details. Limited One (1) Year Warranty A We warrant that the AcuRite Atlas Environmental Monitoring station premium product we manufacture and cover under this warranty is of good material and workmanship and, when properly installed and operated, will be free of defects for a period of one (1) year from the date of purchase. The AcuRite Atlas Environmental Monitoring station which, under normal use and service, is proven to breach the warranty contained herein within ONE (1) YEAR from date of sale will, upon examination by us, and at our sole option, be repaired or replaced by us. Transportation costs and charges for returned goods shall be paid for by the purchaser. We hereby disclaim all responsibility for such transportation costs and charges. This warranty does not cover normal wear and tear not affecting the functionality of the product, or products that have been damaged (including by acts of nature), tampered with, abused, improperly installed, or repaired or altered by anyone other than our authorized representatives. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). If we determine that repair or replacement is not feasible, we may, at our option, refund the amount of the original purchase price (excluding shipping). THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY FOR THE ACURITE ATLAS ENVIRONMENTAL MONITORING STATION PREMIUM PRODUCT AND IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED TO THE EXTENT PERMITTED BY LAW. We expressly disclaim all liability for special, consequential, or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. We further disclaim liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of our products, the purchaser assumes all any other obligation or liability in connection with the sale of our pr is authorized to modify or waive the terms of this warranty unless done in writing and signed by a duly authorized agent of ours. In no case shall our liability for any claim relating to our products, your purchase or your use thereof, exceed the original purchase price paid for the product. WARRANTY CLAIMS T 1. Contact AcuRite Support at and provide opportunity for Customer Support to resolve any issue 2. In the event that an issue cannot be resolved over the phone, customer shall send the product(s) in for evaluation to AcuRite at the contact address (see below) 3. Chaney Instrument Service department will repair or replace product as necessary after evaluation The terms of this Limited Warranty shall be governed in all respects by and construed in accordance with the laws of the State out of this Limited Warranty or your use of the product shall be in the state court located in Walworth County, Wisconsin. You agree to submit to the jurisdiction of such court. Contact Information If you have questions about this Limited Warranty, please contact us at: AcuRite Attn: Warranty Inquiry 965 Wells St, Lake Geneva, WI Printed in China INST
Instruction Manual AcuRite Atlas Indoor Display model 06061 How It Works AcuRite Atlas is an environmental monitoring station that delivers key information on current outdoor conditions in your exact location.
Instruction Manual Display for 5-in-1 Weather Sensor model 06005RM/1010RX Package Contents 1. Display unit with tabletop stand 2. Instruction manual This product requires an AcuRite 5-in-1 Weather Sensor
Instruction Manual Weather Station model 02099 / 4409999 CONTENTS Unpacking Instructions... 2 Package Contents... 2 Product Registration... 2 Features and Benefits: Sensor... 2 Features and Benefits: Display...
Instruction Manual Weather Station model 02086 / 1440601 CONTENTS Unpacking Instructions... 2 Package Contents... 2 Product Registration... 2 Features and Benefits: Sensor... 2 Features and Benefits: Display...
Instruction Manual Display for 5-in-1 Weather Sensor model 06022RM Package Contents 1. Display unit with tabletop stand 2. Power adapter 3. Instruction Manual This product requires an AcuRite 5-in-1 Weather
1 PACKAGE CONTENTS 1. Flip-Up Antenna 2. Power Adapter Port 3. Ethernet Port 4. Network Status Light 5. Sensor Status Light 6. Ethernet Cable 7. Power Adapter 1 2 3 smarthub 5 6 WHAT YOU NEED (not included)
Instruction Manual Professional Weather Display model 06086 This product requires an AcuRite 5-in-1 Weather Sensor (sold separately) to be operational. CONTENTS Unpacking Instructions... 2 Package Contents...
Instruction Manual Display for 5-in-1 Weather Sensor model 06006 Package Contents 1. Display with Tabletop Stand 2. Power Adapter 3. USB Cable 4. Instruction Manual This product requires an AcuRite 5-in-1
Wireless Color Weather Station For online video support: http://bit.ly/laxtechtalk Model: M84282 DC: 071117 Table of Contents Button Function Explanation... Setup... Settings Menu... Fahrenheit Celsius...
Instruction Manual Professional Weather Center models 01502 / 01514 Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Clocks C C AcuRite offers an extensive assortment
WIRELESS MULTI-ZONE DIGITAL THERMOMETER WITH RADIO CONTROLLED CLOCK Model No. 91049-1 (SF Version) Instruction Manual BASE STATION REMOTE SENSOR FEATURES AND SPECIFICATIONS BASE STATION Indoor / RF outdoor
Model: T83653v2 Instruction manual DC: 012916 WIRELESS COLOR FORECAST STATION Mold Risk for Forecast Station & Indoor Remote Sensor Location FRONT VIEW Time, Alarm + Calendar Indoor Humidity & Temperature
Model: 308-1412S Manual DC: 080217 WIRELESS COLOR FORECAST STATION SENSOR TX141TH-Bv2 LED TX Sensor Battery 2 AA Buttons 3 AAA AC Power USB PORT Model: 308-1412S www.lacrossetechnology.com/support Page
PRECISE TEMP WIRELESS MULTI-ZONE THERMOMETER and HYGROMETER With CLOCK Model No. 91756 User's Manual BASE STATION REMOTE SENSOR FEATURES AND SPECIFICATIONS BASE STATION Indoor / wireless outdoor temperature,
Ambient Weather RC-8487 ClearView Radio Controlled Travel Alarm Clock with Indoor Temperature User Manual Table of Contents 1. Introduction... 1 2. Getting Started... 2 2.1 Display Features... 2 2.2 Parts
Ambient Weather RC-9362 Atomic Digital Wall Clock with Temperature User Manual Table of Contents 1. Introduction... 1 2. Getting Started... 2 2.1 Product and Display Features... 2 2.2 Parts List... 2 2.3
WIRELESS TEMPERATURE & HUMIDITY STATION INSTRUCTION MANUAL MODEL: S82967 DC: 071118 FIND MANUALS, FAQS, AND MORE UNDER THE SUPPORT TAB HERE: www.lacrossetechnology.com/s82967 TABLE OF CONTENTS 3. Power
Model: 616-146v2 Quick Setup Guide DC: 090116 Atomic Projection Alarm with Indoor and Outdoor Temperature Snooze/Backlight BUTTONS Time, Alarm with Snooze, & Calendar Projection Arm Rotates 180 Indoor/Outdoor
Color Forecast Station Model: C884 Instructional Manual DC: 01816 View online setup video at: http://bit.ly/laxtechtalk Table of Contents LCD Features... Setup... Atomic Time... Set Language, Time, Date
Model: 308-1425C Instruction Manual DC: 102314 WIRELESS COLOR WEATHER STATION FRONT VIEW Time Calendar + Alarm REMOTE SENSOR TX141TH-Bv2 Color Animated Forecast + Tendency Indoor Humidity & Temperature
READ ME FIRST DIY WIRELESS ALERT Add-on Alert Sensor For Swann Wireless Alert systems EN Instruction Manual 2 About this Manual The content in this manual is for information purposes only and is subject
Model: S88907 Instruction Manual DC: 072314 WIRELESS COLOR WEATHER STATION FRONT VIEW SIDE BUTTONS Time Calendar + Alarm Color Animated Forecast + Tendency Remote Humidity & Temperature with Trend Indoor
Model: 616-143 Quick Setup Guide DC: 072915 Atomic Projection Alarm Clock Snooze/Backlight Projection Lens Projection Arm Rotation (Front and Back) FRONT VIEW Buttons Projection Focus BACK VIEW AC Power
Twin Bell Digital Clock Model: V50-500 Instruction Manual PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE. SPECIFICATIONS... 1 SAFETY INSTRUCTIONS... 2 FUNCTIONS...
TABLE OF CONTENTS INTRODUCTION 3 PRODUCT OVERVIEW 4 REMOTE RAIN GAUGE 7 BEFORE YOU BEGIN 9 BATTERY INSTALLATION 10 LOW BATTERY WARNING 11 HOW TO USE THE TABLE STAND 11 GETTING STARTED 11 Honeywell Wireless
Owner s Manual PIR-1 IR Learner PIR-1 Owner s Manual 2010-2013 Universal Remote Control, Inc. The information in this owner s manual is copyright protected. No part of this manual may be copied or reproduced
User s Guide 2760347 PIR Sensor Thank you for purchasing your PIR Sensor from RadioShack. Please read this user s guide before setting up and using your new sensor. Attention: Observe precautions for handling
Honeywell Temperature & Humidity Sensor with LCD TABLE OF CONTENTS INTRODUCTION 3 PRODUCT OVERVIEW 4 BEFORE YOU BEGIN 5 BATTERY INSTALLATION 7 LOW BATTERY WARNING 7 PLACEMENT OF THE REMOTE SENSOR 7 GETTING
RGR150 manual-final-091908:layout 1 9/19/08 8:59 AM Page 1 RGR150 USER S MANUAL Wireless Rain Gauge with Thermometer and Clock INTRODUCTION Thank you for selecting this Wireless Rain Gauge. This device
View the expanded manual: http://aeotec.com/support GEN5 1 Aeotec by Aeon Labs Door/Window Sensor. The Aeotec by Aeon Labs Door/Window Sensor Gen5 provides your Z-Wave network with the intelligence required
TABLE OF CONTENTS INTRODUCTION 3 PRODUCT OVERVIEW 4 7 BEFORE YOU BEGIN 9 BATTERY INSTALLATION 10 Wireless Rain Gauge with Indoor Temperature LOW BATTERY WARNING 11 HOW TO USE THE TABLE STAND 11 GETTING
PRODUCT DIAGRAM PACKAGE CONTENTS After receiving the product, please inventory the contents to ensure you have all the proper parts, as listed below. If anything is missing or damaged, please contact Monoprice
Ambient Weather RC-8365 ClearView Radio Controlled Projection Clock with Indoor and Outdoor Temperature User Manual Table of Contents 1. Introduction... 1 2. Warnings... 2 3. Getting Started... 2 3.1 Product