Measuring Guide for Wood Valances and Faux Wood Valances

Transcription

1 Measuring Guide for Wood Valances and Faux Wood Valances Choose a Mount Type: or Outside Mount Tools and Tips Steel tape measure do not use cloth tape Pencil Round measurements to the nearest / Double-check your work always measure twice to ensure accuracy. / /4" 3/ /" 5/ 3/4" 7/ : Flush Window treatments are installed completely inside the window casing. n Valance is manufactured with straight-cut edges on both ends and looks best when it is mounted flush to the window casing. Use the charts on the following pages to determine if your window is deep enough for a Full Recess Valance. Flush Mount : Partial Recess Window treatments extend beyond the window casing. n Valance is manufactured with straight-cut edges on both ends. Depending how far the valance extends beyond the window casing, returns (side pieces) can be ordered to cover the ends of the headrail and valance for a more finished look. Use the charts and instructions on the following pages to determine the special valance return length needed, if necessary. Valance returns are available from /" to. Note: Returns and valances are measured and cut from the INSIDE of the miter () to ensure the most accurate fit when installed over the headrail or window frame. For example, a 3" valance with returns: 3" would be the CKSIDE/INSIDE measurement. The front side measurement would be greater than 3" (which is correct). Returns would also be measured and cut on the CKSIDE of the miter. Partial Recess Exposed Straight Cut Edge : Inside Measurement : Outside Measurement Partial Recess Valance with Returns Outside Mount Window treatments installed outside the window casing. n Outside Mount Valance is manufactured with standard returns (side pieces) sized to cover the ends of the headrail and valance for a more finished look. See the charts on the following pages for standard outside mount return lengths. Valance returns are available from /" to. Note: Returns and valances are measured and cut from the INSIDE of the miter () to ensure the most accurate fit when installed over the headrail or window frame. For example, a 3" valance with returns: 3" would be the CKSIDE/INSIDE measurement. The front side measurement would be greater than 3" (which is correct). Returns would also be measured and cut on the CKSIDE of the miter. Outside Mount Valance If your Outside Mount Valance does not require returns, please specifiy at the time of order. : Inside Measurement : Outside Measurement 7/4

2 VLNCE RETURNS: HORIZONTL LINDS VLNCE TYPE " Classic Valance " to ": glued 6" to 4 5 : optional glued 4 6" and greater: not glued keystone not available 3" Classic Valance " to ": glued 6" to 4 5 : optional glued 4 6" and greater: not glued 3 " Legacy Valance LIND TYPE Maximum Continuous Width* INSIDE MOUNT** OUTSIDE MOUNT " Traditions amboo and arnwood 94 4" " " Traditions Composite TILT TYPE RETURN LENGTH FULL RECESS DEPTH cord 7 3¼" wand 3 9 6" 3 7 cordless " cord 7 3¼" wand 3 9 6" 3 7 cordless " ½" Traditions Double evel Composite cord 3 5 6" 4 4" " Lake Forest Premium Faux Wood " Lake Forest Faux Wood ½" Lake Forest Premium Faux Wood ½" Lake Forest Faux Wood cord 7 3¼" wand 3 9 6" 3 7 cordless " cord 3 5 6" 4 4" cordless 3 3 4" 4 " Traditions Wood ¼" 98 3 wand 6" 3 " Traditions Elite Wood ¼" 98 3 wand ¾" 6" " Grandeur luminum " Horizontal Vinyl " Traditions and Elite Wood ¼" Traditions and Elite Wood ¼" 98 3 ½" Traditions Wood Shutter Style ¼" 97¾" cord 7 3¼" wand 3 9 6" 3 7 cordless 3 3 3¾" cord 3 3 4" 4 6" cordless 3 9 6" 3 5 6" cord 3 5 6" 4 4" cordless 3 3 4" 4 " Traditions Wood ¼" 98 3 wand 6" 7 6" " Traditions Elite Wood ¼" 98 3 wand 3 4" " Grandeur luminum " Horizontal Vinyl " Traditions and Elite Wood ¼" Traditions and Elite Wood ¼" 98 3 cord " wand 3 9 6" 4" cordless " cord 3¾" 4 6" cordless 3 9 6" 4" " to ": glued 6" to 4 5 : optional glued 4 6" and greater: not glued " Traditions Elite uthentic merican Hardwoods* ¼" 98 3 " Traditions Distressed* ¼" 98 3 ½" Traditions Shutter Style ¼" 98 3 cord " wand 3 9 6" 4" cordless " cord " wand 3 9 6" 4" cordless " cord 3 5 6" 4 3 cordless 3 3 4" 4 3 6" * Continuous valances wider than sizes shown above will have two or more sections spliced together. Maximum width for spliced valances is 3". Keystones not available with Elite uthentic Hardwood, Distressed, arnwood, amboo, Composite or Faux Wood Valances. **ssumes no returns on inside mount. 7/4

3 VLNCE RETURNS: HORIZONTL LINDS VLNCE TYPE 4 " Symphony Valance " to ": glued 6" to 4 5 : optional glued 4 6" and greater: not glued 3" Majestic Valance LIND TYPE Maximum Continuous Width* INSIDE MOUNT** OUTSIDE MOUNT TILT TYPE RETURN LENGTH FULL RECESS DEPTH " Traditions Wood ¼" 98 3 wand 6" 3 6" " Traditions Elite Wood ¼" 98 3 wand 3 4" " " Grandeur luminum " Horizontal Vinyl " Traditions and Elite Wood ¼" Traditions and Elite Wood ¼" 98 3 ½" Traditions Shutter Style ¼" 98 3 " Traditions Composite cord wand 3 9 6" 4 5 6" cordless cord 3¾" 4 " cordless 3 9 6" 4 5 6" cord 3 5 6" 4 6" cordless 3 3 4" 4 " cord wand 3 9 6" 4 6" cordless ½" Traditions Double evel Composite cord 3 5 6" 4 7 6" " to ": glued 6" to 4 5 : optional glued 4 6" and greater: not glued Keystone not available " Lake Forest Premium Faux Wood " Lake Forest Faux Wood ½" Lake Forest Premium Faux Wood ½" Lake Forest Faux Wood cord wand 3 9 6" 4 6" cordless cord 3 5 6" 4 7 6" cordless 3 3 4" 4 4" 3 eaded Valance " Traditions Wood ¼" 98 3 wand 6" 3 " Traditions Elite Wood ¼" 98 3 wand 3 4" 6" " Grandeur luminum " Horizontal Vinyl " Traditions and Elite Wood ¼" 98 3 cord 7 3 4" wand 3 9 6" 3 7 cordless " " to ": glued 6" to 4 5 : optional glued 4 6" and greater: not glued 3 Traditions and Elite Wood ¼" 98 3 ½" Traditions Shutter Style ¼" 98 3 cord 3¾" 4 6" cordless 3 9 6" 3 5 6" cord 3 5 6" 4 4" cordless 3 3 4" 4 * Continuous valances wider than sizes shown above will have two or more sections spliced together. Maximum width for spliced valances is 3". Keystones not available with Elite uthentic Hardwood, Distressed, arnwood, amboo, Composite or Faux Wood Valances. **ssumes no returns on inside mount. 7/4

4 WOOD CORNICE ND VLNCE RETURN INFORMTION Product and Valance Type Standard Return Inside Width Full Recess Depth Product and Cornice Type Standard Return Full Recess Inside Width Depth " Horizontal linds 4 " Symphony Wood Cornice 5" 5 3 6" 3 eaded Valance See pages and for 5 " Majestic Wood Cornice 5" 6" 3 " Legacy Wood Valance information 7 " Majestic Wood Cornice 5" 6 5 6" 4 " Symphony Wood Valance 5 " Royal Wood Cornice 5" 6 7 6" 7 " Royal Wood Cornice 5" 7" 3 & " Horizontal linds 4 " Symphony Wood Cornice 5" 5 3 6" 3 eaded Valance See pages and for 5 " Majestic Wood Cornice 5" 6" 3 " Legacy Wood Valance information 7 " Majestic Wood Cornice 5" 6 5 6" 4 " Symphony Wood Valance 5 " Royal Wood Cornice 5" 6 7 6" 7 " Royal Wood Cornice 5" 7" Cellular, Pleated and Solar/Roller Shades 3 3 4" 4 /6" 4 " Symphony Wood Cornice 3 3 4" 4 9 6" 3 eaded Valance 3 3 4" 4 /6" 5 " Majestic Wood Cornice 3 3 4" 4 3 4" 3 " Legacy Wood Valance 3 3 4" " Majestic Wood Cornice 3 3 4" 5 6" 4 " Symphony Wood Valance 3 3 4" 4 " 5 " Royal Wood Cornice 3 3 4" 5 3 6" 7 " Royal Wood Cornice 3 3 4" 5 3 4" Dual Shades * 5 " 5 3 6" 4 " Symphony Wood Cornice 5 " 6 5 6" 3 eaded Valance* 5 " 5 3 6" 5 " Majestic Wood Cornice 5 " 6 " 3 " Legacy Wood Valance* 5 " 6 7 " Majestic Wood Cornice 5 " 6 3 6" 4 " Symphony Wood Valance 5 " 6 4" 5 " Royal Wood Cornice 5 " 6 5 6" 7 " Royal Wood Cornice 5 " 7 " Natural Drapes 6" 6 5 6" 4 " Symphony Wood Cornice 6" 6 3 6" 3 eaded Valance 6" 6 5 6" 5 " Majestic Wood Cornice 6" 7" 3 " Legacy Wood Valance 6" " Majestic Wood Cornice 6" 7 5 6" 4 " Symphony Wood Valance 6" 6 3 4" 5 " Royal Wood Cornice 6" 7 7 6" 7 " Royal Wood Cornice 6" Natural Shades " 4 " Symphony Wood Cornice " 3 eaded Valance " 5 " Majestic Wood Cornice " Legacy Wood Valance " 7 " Majestic Wood Cornice " 4 " Symphony Wood Valance " Royal Wood Cornice " 7 " Royal Wood Cornice Slide-Vue " 4 " Symphony Wood Cornice " 3 eaded Valance " 5 " Majestic Wood Cornice " Legacy Wood Valance " 7 " Majestic Wood Cornice " 4 " Symphony Wood Valance " Royal Wood Cornice " 7 " Royal Wood Cornice 3 5 Sliding Panels 5" 5 5 6" 4 " Symphony Wood Cornice 5" 5 3 6" 3 eaded Valance 5" 5 5 6" 5 " Majestic Wood Cornice 5" 6" 3 " Legacy Wood Valance 5" " Majestic Wood Cornice 5" 6 5 6" 4 " Symphony Wood Valance 5" 5 3 4" 5 " Royal Wood Cornice 5" 6 7 6" 7 " Royal Wood Cornice 5" 7" Vertical linds 5 " 5 3 6" 4 " Symphony Wood Cornice 5 " 6 5 6" 3 eaded Valance 5 " 5 3 6" 5 " Majestic Wood Cornice 5 " 6 " 3 " Legacy Wood Valance 5 " 6 7 " Majestic Wood Cornice 5 " 6 3 6" 4 " Symphony Wood Valance 5 " 6 4" 5 " Royal Wood Cornice 5 " 6 5 6" 7 " Royal Wood Cornice 5 " 7 " Note: Minimum return length is "; maximum return length is. Valance returns "-" will be glued, 6"- 4 5 optional glued, 4 6" and greater cannot be glued. Cornices are not available on bay or corner windows. Valances only available on bay or corner windows if bay or corner application is available on entire product line selected. See Pricing and Information Guide of product selected for measuring instructions. If the valance or cornice is to be used alone (no product selected), the return length must be specified at the time of the order. *Not recommended due to the height of the shade. Dual Shades can be configured with 7 " Cornices. 5 " Cornices are available only when Dual Shade has no cassette with inside mount and Cornices are outside mount. 7/4

5 COMPOSITE ND FUX WOOD VLNCE RETURNS Product and Valance Type Standard Return Inside Width Full Recess Depth Cellular, Pleated and Solar/Roller Shades " Classic Composite or Faux Wood Valance 3 3 4" 4 6" 3" Majestic Composite or Faux Wood Valance 3 3 4" 4 4" Dual Shades " Classic Composite or Faux Wood Valance* 5 " 5 3 6" 3" Majestic Composite or Faux Wood Valance* 5 " 6 5 6" Natural Drapes " Classic Composite or Faux Wood Valance 6" 6 5 6" 3" Majestic Composite or Faux Wood Valance 6" 6 7 6" Natural Shades " Classic Composite or Faux Wood Valance " 3" Majestic Composite or Faux Wood Valance Slide-Vue " Classic Composite or Faux Wood Valance " 3" Majestic Composite or Faux Wood Valance " Sliding Panels " Classic Composite or Faux Wood Valance 5" 5 5 6" 3" Majestic Composite or Faux Wood Valance 5" 5 7 6" Vertical linds " Classic Composite or Faux Wood Valance 5 " 5 3 6" 3" Majestic Composite or Faux Wood Valance 5 " 6 5 6" NOTE: Valances only available on bay or corner windows if bay or corner application is available on entire product line selected. See Pricing and Information Guide of product selected for measuring instructions. If the valance is to be used alone (no product selected), the return length must be specified at the time of the order. *Not recommended due to the height of the shade. HOW TO MESURE FOR VLNCE RETURNS Window depths vary considerably depending on the age and style of the window. lways measure the window depth, regardless of the type of window treatment the client is considering. Knowing the depth when the order is placed can help prevent costly errors. Use the information in your Graber Pricing and Information Guide for Wood, Composite & Faux Wood to calculate the needed return length (chart above). To calculate the return length, use this formula: [Standard Return Length] minus [Client Window Depth] = Special Return Length to order for lind Remember: The smallest return width is ½". The length of a return and the width of a valance are measured on the inside (back side ) of the valance, not the outside (face ) of the valance (see diagram at right). : Inside Measurement : Outside Measurement 7/4

6 SIZE CONSIDERTIONS: CORNICE ND VLNCE Type of Valance or Cornice 3 eaded Wood Valance 3 " Legacy Wood Valance Minimum Width Outside Mount Maximum Width Without Splicing NO Returns Outside Mount or with Returns Maximum Width With Splicing Outside Mount 4" " " Symphony Wood Valance 8 ¼" " Classic Composite or Faux Wood Valance + 3" Majestic Composite or " " Faux Wood Valance + 4 " Symphony Wood Cornice* 5 " Majestic Wood Cornice ^ 9 7 " Majestic Wood Cornice ^ 8 ¼" " Royal Wood Cornice ^ 9 7 " Royal Wood Cornice ^ 9" 9 ½" 9½" 366" 366" Note: Cornices and Valances wider than the widths shown in the chart above will be manufactured in multiple sections. The sections must be assembled during installation. Customer may request specific locations for the splices as long as it does not exceed our maximum single piece size. ll requests for additional Cornice or Wood Valance splices require a keystone. The keystone surcharge applies to each additional splice. *4 " Symphony Cornices cannot be spliced and keystones are not available. ^Inside mount Wood Cornices that require a keystone cannot be mounted flush to the top of the window casing. There will be approximately a 4" gap at the top and the installation brackets may be visible with this application. +Keystones are not available with Composite and Faux Wood Valances. These formulas are used to calculate CKSIDE Valance measurements. These formulas are used to calculate CKSIDE Cornice measurements. with NO Returns Ordered Width - 6" with Returns Ordered Width +¾" Outside Mount with NO Returns Ordered Width + " Outside Mount with Returns Ordered Width + 3 4" ll except Soft Vertical and Sliding Panels with NO Returns Ordered Width - 6" Outside Mount with Returns Soft Vertical and Sliding Panels Ordered Width +¾" with NO Returns Ordered Width - 6" Outside Mount with Returns Ordered Width +½" If the product option of OTHER is selected during entry, the CKSIDE cornice/valance measurement will be the exact width entered. There will be no additions or deductions taken. Cornice or valance return size must be specified. HOW TO MESURE SPECIL SPLICE LOCTION keystone is supplied for valance widths that require a splice. Keystones will be equally spaced unless a special splice location is requested at time of order. The placement of the splice will be calculated by the factory using an INSIDE measurement from the mitered corner to the location specified on the order. SECTION SECTION SECTION 3 3" 5" 8" Each splice location should be recorded starting from the LEFT CKSIDE corner. Example: Overall valance width = 8" backside measurement First splice from left = 3" backside measurement Second splice from left = 5" backside measurement For keystone pricing, see pricing pages. NOTE: ll measurements need to be from backside. 7/4

7 DECORTIVE KEYSTONES Decorative Keystones are required on Wood Cornices and Valances that require splicing The keystones will be equally spaced unless special splice locations are requested at time of order Keystones can be requested on Wood Cornices or Valances without a splice Minimum width with a keystone: " Maximum number of keystones: 3 Keystones will be stained or painted to match the Valance or Cornice ordered as standard; optional different color selection available Keystones not available on uthentic Hardwood, amboo Wood, arnwood Wood, Distressed Wood, Composite or Faux Wood Valances Keystones not available in Sandblast SPLICE REQUIREMENTS Profile 3 eaded Wood Valance 3 " Legacy Wood Valance 4 " Symphony Wood Valance No Returns With Returns (Inside Dimensions) Number of Sections Number of Keystones Minimum Maximum Minimum Maximum 4" " " " " 3" 98 6" " Majestic Cornice 94 6" 87 6" 9 3 6" " " 78 4" " 366" " 366" 7 " Majestic Cornice 94 6" 86 6" 9 7 6" " " " " 366" " 366" 5 " Royal Cornice 94 6" " 9 3 6" " " 76 4" " 366" " 366" 7 " Royal Cornice 94 6" 86" 9 6" 9" 8" " 7 8 6" 74" " 366" 74 6" 366" Outside Mount Wood Cornices and Valances requiring a splice will include a keystone (see chart above for details) Keystones are not available on Composite or Faux Wood Valances Keystones will be equally spaced unless special splice locations are requested Optional keystones can be ordered with single piece cornices or valances or in addition to required keystones Minimum width with a keystone is " Maximum number of keystones is 3 Wood Valances 4" or wider and Cornices exact or wider will require a keystone Keystones are not available on Composite or Faux Wood Valances Keystones will be equally spaced unless special splice locations are requested Optional keystones can be ordered with single piece cornices or valances or in addition to required keystones Minimum width with a keystone " Maximum number of keystones is 3 MXIMUM WIDTH MXIMUM WIDTH SECTION SECTION SECTION SECTION SECTION SECTION SECTION 3 SECTION SECTION SECTION 3 SECTION SECTION SECTION 3 SECTION 4 SECTION SECTION SECTION 3 SECTION 4 *NOTE: Inside mount cornices with a keystone do not mount flush at the top, there will be a slight gap. 7/4