TRADEWINDS NATURAL SHADES AND DRAPES

Transcription

1 TRADEWINDS NATURAL SHADES AND DRAPES TABLE OF CONTENTS Features And Size Considerations Summary Nature's Beauty of Natural Shades Unique Characteristics of Natural Shades Material Styles and Information: Natural Shades and Natural Drapes Light Control and Privacy Size Considerations: Natural Shades and Natural Drapes Options Shade Options... 6 Standard Cord Control, Continuous-loop Lift and Cordless Lift: Natural Shades... 7 Motorized Lift: Natural Shades Standard Cord Control and Optional Wand Control: Natural Drapes... 9 Edge Banding and Colors: Natural Shades and Natural Drapes Liners: Natural Shades and Natural Drapes Fullness: Natural Drapes Bottom Up/Top Down, Cut-outs: Natural Shades Multiple Shades on One Headrail: Natural Shades Bay and Corner Windows Valance Options: Natural Shades and Drapes Accent Gimp: Natural Shades Deco-Pocket Hem: Natural Shades Angle Top: Natural Shades Turned Headrail: Natural Shades General Information Suggested Privacy and Liner Color Coordination Stack Charts: Natural Shades and Drapes Standard Roman and Looped Shade Product Detail: Natural Shades Continuous-loop Lift Control and Cordless Lift Product Detail: Natural Shades Cordless Shades Product Detail: Natural Shades Bottom Up/Top Down Corded Shades Product Detail: Natural Shades Control Options Product Detail: Natural Drapes Price Charts And Option Pricing Natural Shades Price Group A: Anyi, Revelry Natural Shades Price Group B: Chencun, Escape, Lipo, Ningtu, Serenity Natural Shades Price Group C: Lutan, Toushan II, Yunnan Natural Shades Price Group D: Ascot, Beachfront, Boardwalk, Inan, Majian, Saterra, Terrestrial Natural Shades Price Group E: Amour, Dalan, Liren, Meilin, Merino, Taima, Zishan Natural Shades Price Group F: Beikan, Shatian, Wuxi Natural Shades Options Pricing Natural Drape Price Group G: Anyi, Revelry Natural Drape Price Group H: Chencun, Escape, Lipo, Ningtu Natural Drape Price Group I: Lutan, Toushan II, Yunnan Natural Drape Price Group J: Boardwalk, Inan, Majian Natural Drape Price Group K: Amour, Dalan, Merino UNITED STATES PRICE LIST JULY 2015

2 Natural Shades Features Graber Natural Shades are crafted from bamboo reed, slit bamboo, sisal, grass and jute materials. They add natural color, texture and dimension to your windows and create a comfortable atmosphere of casual elegance or simple sophistication. Standard Roman, Old Style Roman or Looped Roman Shade designs Wide selection of colors, textures and unique weaves Standard Cord Control, Cordless Lift, Continuous-loop Lift System, Bottom Up/Top Down and Motorized Lift available 6" (15.3 cm) valance with horizontally oriented material is standard on shades except for Motorized Lift and Continuous-loop Lift 9" (22.8 cm) valance with horizontally oriented material is standard on shades with Motorized Lift and Continuous-loop Lift Premiere valance is standard on shades with Cordless Lift Natural Drapes Natural Drapes feature the rolling qualities of drapery in vertically oriented Natural Shade material Features corded control in single or split stack; optional wand control available at no charge Choose from standard fullness (when closed, waves slightly) or a 60% fullness (when closed, features drapery-like appearance) Premiere Valance included with drape with vertical material orientation Shade without valance (optional at no charge) is not recommended, as aluminum headrail and hardware will be visible. Suggested when ordering wood cornice. Valance and returns will extend 1 2" (1.3 cm) further than drape width Edge Banding is required on the drapes and valance. Select from 1" (2.6 cm) or 2" (5.1 cm) Solid Edge Banding for the drapes Valance uses matching 1" (2.6 cm) Edge Banding NOTE: Not available with Ascot, Beachfront, Beikan, Liren, Meilin, Saterra, Serenity, Shatian, Taima, Terrestrial, Wuxi and Zishan. 2

3 Features Nature's Beauty Of Natural Shades There is simply no substitute for the beauty of the materials used in Natural Shades. The colors and textures of bamboo, reeds, grass and jute have a distinct character and one-of-akind look that synthetic materials can t match. With character, however, comes inherent natural properties that may influence the appearance of the finished shade. Recognizing and understanding the characteristic traits of natural materials will provide more satisfaction and enjoyment by knowing why each shade is truly unique! Unique Characteristics Of Natural Shades Asymmetry Materials used in Natural Shades are grown and harvested naturally. Variations in shape, thickness, texture and graining are to be expected from Mother Nature. While adding personality, these variations create asymmetry in the weave that may alter the appearance of the finished shades. Specifically, you may notice: Uneven spacing or gaps differences in bamboo or reed shapes and thicknesses can create uneven spacing or gaps in the weave Pattern changes or gaps varying thickness of grassy materials, tied knots and splices can create visual disruptions in the weave pattern or gaps in the weave Length differences variations in thickness, bamboo joints or reed sizes can create length differences from both sides of the shades Bowing or arching different drying rates of bamboo fibers on one side and skin on the other side of the bamboo slat can create a bowing or arching effect on the finished shades To minimize variations, all materials used are hand selected to strict specifications. These variations are not considered flaws, but rather are normal characteristics to be expected from naturally-grown materials. Stretching The natural elasticity of yarns, combined with the weight of the woven material may cause shades to stretch from 1" (2.6 cm) to 1½" (3.9 cm), and for sliding panels to stretch from 1" (2.6 cm) to 2" (5.1 cm) after installation. This is particularly noticeable on inside mount shades or shades that extend from ceiling to floor. Ordering shades shorter than needed will help compensate for stretching over time. Adding edge banding not only gives your shades a truly personal touch, but also helps to control the stretching. Tips During the shipping process, the natural material may have shifted slightly due to its woven construction, causing slight shortening or uneven edges. Height If after installation, the shades are slightly shorter than ordered, grasp the bottom of the shades and gently pull to stretch to the preferred height. Some materials will also stretch by themselves over time. Uneven Edges Lightly tap edge of the shades with a flat edge (for example, a ruler) until even. Frayed Edges If threads come loose near the edges, use a sharp scissors to trim off stray threads. Color Mellowing with age, the color of bamboo, reeds, jute, grasses and other natural materials will change slightly. Depending on material composition, they may lighten or darken due to direct sunlight or other climatic conditions. Uncolored bamboo will experience the most color shift, changing from a green color at harvest to a yellow-brown color over three to six months. Color matching of shades cannot be guaranteed as these are natural reactions to aging. Natural Shades may have variations and visual inconsistencies in color, weave, grain and texture. They may also crack or split, twist or bow, shrink or stretch, and change color over time due to aging, direct sunlight or other climatic conditions. These unique characteristics are inherent in natural materials and are not considered defects in material or workmanship. Exact color matches cannot be guaranteed. 3

4 Features Material Styles And Information: Natural Shades And Natural Drapes Price Group (Shades) Price Group (Drapes) Amour E K Anyi A G Ascot D N/A Beachfront D N/A Beikan F N/A Boardwalk D J Chencun B H Dalan E K Escape B H Inan D J Lipo B H Liren E N/A Lutan C I Majian D J Meilin E N/A Merino E K Ningtu B H Revelry A G Saterra D N/A Serenity B N/A Shatian F N/A Taima E N/A Terrestrial D N/A Toushan II C I Wuxi F N/A Yunnan C I Zishan E N/A Max Fabric Width 72" (182.9 cm) 72" (182.9 cm) Privacy Light Control* Material Content Street side Appearance Light Filtering Slit Bamboo, Bamboo Reed, Curly Jute Same front and back Sheer Bamboo Reed Same front and back Sheer to Light Filtering Bamboo Reed, Cellulose Same front and back Sheer Bamboo Reed, Ramie Same front and back Sheer to Light Filtering Sheer to Light Filtering Sheer to Light Filtering Bamboo Reed, Grasses, Jute Braid Bamboo Reed, Grass, Jute Slit Bamboo, Bamboo Reed Same front and back Same front and back Same front and back Light Filtering Bamboo Reed, Jute Braid Same front and back Light Filtering Bamboo Reed Same front and back Sheer to Light Filtering Sheer to Light Filtering Sheer to Light Filtering Sheer to Light Filtering Sheer to Light Filtering Slit Bamboo, Bamboo Reed, Jute Rope Slit Bamboo, Bamboo Reed Bamboo Reed, Hollow Bamboo, Jute Braid Slit Bamboo, Bamboo Reed Bamboo Reed Same front and back Same front and back Same front and back Same front and back Same front and back Light Filtering Jute, Jute Braid, Bamboo Reed Same front and back Light Filtering Bamboo Reed, Jute, Jute Braid Same front and back Sheer to Light Filtering Sheer to Light Filtering Slit Bamboo, Bamboo Reed Bamboo Reed Same front and back Same front and back Sheer Jute Same front and back Light Filtering Bamboo Reed Same front and back Sheer Sheer to Light Filtering Grass, Hollow Bamboo, Jute Braid, Bamboo Reed Jute, Bamboo Reed Same front and back Same front and back Light Filtering Grass Same front and back Light Filtering Slit Bamboo, Bamboo Reed Same front and back Sheer to Light Filtering Bamboo Reed, Hollow Bamboo, Cellulose Same front and back Light Filtering Bamboo Reed Same front and back Light Filtering Grass, Bamboo Reed Same front and back *Privacy and Light Control without liner; addition of Privacy or Liner improves Privacy and Light Control N/A: Not Available Light Control And Privacy Sheer: Allows the most amount of light into the room for a minimum amount of privacy and a view to the outside. Objects in the room can be seen quite clearly through shades. Light Filtering: Allows light to gently filter through and provides privacy. Images and shapes may be seen through these shades. 4

5 Natural Shades Standard Roman Old Style Roman Looped Roman Bottom Up/Top Down Continuous Cord Loop Cordless Lift Size Considerations WIDTH Minimum Maximum Minimum Maximum 10" (25.4 cm) Outside Mount " (26.7 cm) Inside Mount 10" (25.4 cm) Outside Mount " (26.7 cm) Inside Mount 12" (30.5 cm) Outside Mount " (31.8 cm) Inside Mount 14" (35.6 cm) Outside Mount " (36.9 cm) Inside Mount 24" (61.0 cm) Outside Mount " (62.3 cm) Inside Mount 12" (30.5 cm) Outside Mount " (31.8 cm) Inside Mount Single 144" (365.8 cm) Multiple 72" (182.9 cm) with Deco-pocket Hem and Accent Rod Single 144" (365.8 cm) Multiple 10" (25.4 cm) 16" (40.6 cm) with Deco-Pocket Hem 10" (25.4 cm) 120" (304.8 cm) 108" (274.4 cm) 86" (218.5 cm) See Price Charts Multiple Shades on One Headrail " (52.1 cm) 144" (365.8 cm) 10" (25.4 cm) See Price Charts Motorized Lift Determined by square feet. See Motorization Tab for more details. * Except Shatian, Wuxi: maximum width 72" (182.9 cm) Depth Requirements For Inside Mount Partially recessed headrail in window casing/ molding Fully recessed headrail in window casing/ molding Type of Shade and Headrail Dimensions Minimum Depth Mount Flush with Casing Standard Roman 5 8" x 1 Bottom Up/Top Down 1 2" (1.6 cm x 3.8 cm) Standard Valance: 2 1 2" (6.4 cm) Continuous-loop Lift 5 8" x 2 Motorized Lift 1 4" (1.6 cm x 5.8 cm) 3 Standard Valance: 3 3 8" (8.6 cm) 4" (2.0 cm) Cordless Lift 1 1 2" x 2 1 8" (3.9 cm x 5.4 cm) Premiere Valance: 4 1 4" (10.8 cm) Turned Headrail 1 1 2" x 5 8" (3.9 cm x 1.6 cm) Standard Valance: 3 4" (2.0 cm) Natural Drapes Standard Drapery Fullness 60% Drapery Fullness Depth Requirements For Inside Mount WIDTH Minimum Maximum Minimum Maximum 16" (40.6 cm) Outside Mount 17" (43.2 cm) Inside Mount NOTE: Minimum surface for outside mount: 3" (7.7 cm) 192" (487.7 cm) 20" (50.8 cm) Partially recessed headrail in window casing/ molding* Fully recessed headrail in window casing/ molding* Headrail Dimensions Minimum Depth Mount Valance Flush with Casing 7 8" x 1 Cord 7 Standard Drapery 8" 3 Fullness 5 8" (9.2 cm) 8" (20.4 cm) (2.3 cm x Control 60% Drapery 4.8 cm) 4 Fullness 1 2" (11.5 cm) 8" (20.4 cm) 7 8" x 1 1 Standard Drapery 2" 3 Fullness 5 8" (9.2 cm) 8" (20.4 cm) Wand Control (2.3 cm x 60% Drapery 3.8 cm) 4 Fullness 1 2" (11.5 cm) 8" (20.4 cm) *Shown without valance; aluminum headrail will be covered by valance. 5

6 Options Shade Options: For Surcharges And Pricing Refer To Pricing Section The following is a list of options for Natural Shades. Most options are available in all styles and colors. Limitations will be based on fabric width and fabric type. See detailed descriptions on the following pages. Control Type Options: Natural Shades see Price Charts for applicable cost and/or surcharges Standard Cord Controls Continuous-loop Lift Cordless Lift (Standard Roman Shades) Motorized Lift (See Motorization Tab) Shade Options: Natural Shades No Charge Bay or Corner Window Clear Cord Cleats: Included with Bottom Up/Top Down Optional with Standard Cord Control Hem options: Standard hem Hold-down brackets Projection Brackets: 3 1 8" (7.9 cm) Returns 2" (5.1 cm) short Turned Headrail Valances included at time of order: Standard 6" (15.3 cm): Standard Cord Control; BUTD Standard 9" (22.8 cm): Continuous-loop Lift and Motorized Lift Premiere 6" (15.3 cm): Cordless Lift No Valance: Optional Shade Options: Natural Shades Surcharge Angle Top Bottom Up/Top Down: Corded Continuous Cord/Chain Loop Cord Cleats: Antique or Solid Brass Cordless Lift Fabric Edge Banding* Cut-outs Hem options: Deco-Trim Hem Deco-Pocket Hem Liners: Privacy and Motorized Lift: Standard and Old Style Roman Shades Multiple Shades on One Headrail Valance options: Standard 9" (22.8 cm): Standard Cord Control; BUTD Premiere 6" (15.3 cm): Standard Cord Control; BUTD Horizontal material orientation,edge banding is optional Vertical material orientation, edge banding top and bottom mandatory Premiere 9" (22.8 cm): All Control Types Horizontal material orientation, edge banding is optional Vertical material orientation, edge banding top and bottom mandatory Deco-Trim Valance 9" (22.8 cm): horizontal material orientation, edge banding or liner not available Wood Cornice: See Cornices and Valances Cost and Product Information Guide Control Type Options: Natural Drapes Standard Cord Controls Wand Control Shade Options: Natural Drapes No Charge Ceiling Mount Brackets Fabric Edge Banding for top, bottom and valance: Standard Fabric Edge Banding for Drape side: Optional No Valance: Optional Stack Right, Left or Split Valances (included at the time of order): Premiere 6" (15.3 cm): Horizontal material orientation, edge banding is optional Vertical material orientation, edge banding top and bottom mandatory Premiere 9" (22.8 cm): Horizontal material orientation, edge banding is optional Vertical material orientation, edge banding top and bottom mandatory Deco-Trim Valance 9" (22.8 cm): horizontal material orientation, edge banding or liner not available Shade Options: Natural Drapes Surcharge Fullness: Standard or 60% Privacy or Liner for Drape (optional at time of order) Wood Cornice: See Cornices and Valances Price List and Product Information Guide * Fabric Edge Banding: Optional on shades, drapes or valances with horizontally oriented material; required on valances with vertically oriented material Hold-down Brackets: Only available at time of order. Cannot be retrofitted. Not available with Edge Banding, Deco-Trim or Deco-Pocket Hem. Natural Shades may have variations and visual inconsistencies in color, weave, grain and texture. They may also crack or split, twist or bow, shrink or stretch, and change color over time due to aging, direct sunlight or other climatic conditions. These unique characteristics are inherent in natural materials and are not considered defects in material or workmanship. Exact color matches cannot be guaranteed. 6

7 Standard Cord Control: Natural Shades Options No charge Color coordinated cord and tassels Controls can be on the right or left of the shade Optional safety cord cleat, provides the ability to keep the cord out of reach for children and pets Standard cord length length is approximately 2 3 of the shade height Continuous-Loop Lift: Natural Shades Cord shown; Bead Chain is used on shades over 30 sq. ft. (2.8 m²). Cordless Lift: Natural Shades For surcharge, see Options Pricing Available on Standard Roman, Old Style Roman and Looped Roman Shades Continuous Cord Loop Control raises and lowers the shade and is color coordinated to the shade material Shades under 30 square feet (2.8 m²) have color coordinated cord Shades over 30 square feet (2.8 m²) will use a nickel-plated steel bead chain loop in place of cord When ordering different size shades for the same room, specify if bead chain is preferred for all shades Allows for easier operation of larger shades 9" (22.8 cm) valance is standard with the Continuous Cord Loop option; (6" (15.3 cm) valance not available) Not available with Bottom Up/Top Down or Angle Top shades For surcharge and size restrictions, see Price Charts Available on Standard Roman Shades Cordless shades offer a safer alternative for homes with children and pets Easy to use: To lower shade, pull down; to raise, simply guide the shade into the desired location by gently lifting the hemrail Not available with Cut-outs, Bottom Up/Top Down, Deco-Trim or Deco-Pocket Hems or Angle Top shades Premiere Valance included at time of order; see valance options for available styles Standard return size is 3 1 8" (7.9 cm) For shades less than 17" (43.2 cm) in width: If finished shade width is: Maximum height of shade is: equal to 12" (30.5 cm) but less than 12½" (31.7 cm) 231/4" (59.1 cm) equal to 12½" (31.7 cm) but less than 13" (33.0 cm) 29½" (74.9 cm) equal to 13" (33.0 cm) but less than 13½" (34.3 cm) 353/4" (90.8 cm) equal to 13½" (34.3 cm) but less than 14" (35.6 cm) " (107 cm) equal to 14" (35.6 cm) but less than 14½" (36.8 cm) " (122.9 cm) equal to 14½" (36.8 cm) but less than 15" (38.1 cm) " (138.8 cm) equal to 15" (38.1 cm) but less than 15½" (39.4 cm) 61" (155.0 cm) equal to 15½" (39.4 cm) but less than 16" (40.6 cm) 671/4" (170.8 cm) equal to 16" (40.6 cm) but less than 16½" (42.0 cm) 73½" (186.7 cm) equal to 16½" (42.0 cm) but less than 17" (43.2 cm) 793/4" (202.6 cm) equal to 17" (43.2 cm) or more 86" (218.5 cm) 7

8 Motorized Lift: Natural Shades Options Refer to motorization Cost and Reference guide for additional options, sizes and pricing Window treatments can be operated from virtually anywhere in the home Provides easy operation of hard-to-reach or large window coverings Efficiently manages energy (heat gain and loss) Operate multiple window treatments simultaneously or individually A safer alternative to accessible cords that are traditionally used to operate window coverings; ideal for homes with children and pets Easily integrated with home automation systems Low voltage motorization requires no costly electrical hard-wiring Multiple control options available NOTE: Motorization components and accessories have a five-year limited warranty, excluding batteries. 8

9 Standard Cord Control: Natural Drapes Options No charge Standard Cord and heavy duty tension pulley hidden behind drape Stack right, left or split Optional Wand Control: Natural Drapes No charge Optional Ivory fiberglass baton is positioned behind the drape Stack right, left or split Split Stack will have two wands Wand Control Chart Finished Blind Length Cord Control Length Baton Length Up to 30" (76.2 cm) 14" (35.6 cm) 12" (30.5 cm) " (76.4 cm) to 48" cm) " (122.1 cm) to 77" (195.6 cm) " (195.8 cm) to 92" (233.7 cm) " (233.8 cm) to 108" (274.4 cm) 26" (66.0 cm) 24" (61.0 cm) 38" (96.6 cm) 36" (91.5 cm) 50" (127.0 cm) 48" (122.0 cm) 62" (157.5 cm) 60" (152.4 cm) 9

10 Edge Banding And Colors: Natural Shades Options For surcharge, see Options Pricing 1" (2.6 cm) or 2" (5.1 cm) fabric banding frames the shade Fabric Edge Banding not available on Deco-Trim or Deco-Pocket Hems, Angle Top Shades, Cut-outs, or with Hold-down Brackets Deco-Trim valance may be ordered with Fabric Edge Banded shades, but this valance will not have Fabric Edge Banding See chart for colors 2" (5.1 CM) EDGE BANDING NATURAL SHADES NATURAL DRAPES Black 1000 x x Bordeaux 2000 x Chocolate 1005 x x Cocoa 1001 x x Dark Beige 1003 x x Denim 2002 x Duck White 1006 x x Maroon 1004 x x Pecan 1010 x x Taupe 1007 x x Toffee 1002 x x Wheat 1009 x x Briar Cocoa 3005 x Briar Toffee 3006 x Infinity Butterscotch 3001 x Infinity Moss 3002 x Infinity Pompeii 3000 x Serpentine Cocoa 3003 x Serpentine Toffee 3004 x 1" ( 2.6 CM) EDGE BANDING NATURAL SHADES NATURAL DRAPES Black 7000 x x Chocolate 7006 x x Cocoa 7001 x x Dark Beige 7005 x x Duck White 7007 x x Maroon 7004 x x Moss 7009 x x Pecan 7011 x x Taupe 7008 x x Toffee 7002 x x Wheat 7010 x x Edge Banding and Colors: Natural Drapes 1" (2.6 cm) or 2" (5.1 cm) colors required on top and bottom of drapes: No charge Optional 1" (2.6 cm) or 2" (5.1 cm) colors available on sides of drapes sides: No charge 1" (2.6 cm) Edge banding of same color will be on edges of valance: On Premiere valance with vertical material orientation, edge banding top and bottom mandatory On Premiere valance with horizontal material orientation, edge banding optional Use above chart for colors. 10

11 Liners: Natural Shades and Natural Drapes Options For surcharge, see Price Charts Liners are an 80/20 poly/cotton blend Available up to wide on shades and 192" (487.7 cm) on drapes Privacy Liner colors available (same color front and back): Black Coffee Cocoa White Room-darkening Liner colors available (neutral to street, color to material side)*: Black Coffee Cocoa * Liner reversal available on shades only. Fullness: Natural Drapes Standard Fullness Right Stack For surcharge, see Price Charts Standard fullness (when closed, waves slightly) 60% fullness (when closed, features drapery-like appearance) Premiere Valance included at time of order; see valance options for available styles 60% Fullness Right Stack 11

12 Bottom Up/Top Down: Natural Shades Options For surcharge, see Options Pricing Allows shades to be raised from the bottom up like a conventional shade, or from the top down Provides privacy while still allowing light in from the top of the window Ideal for bedrooms Fabric Edge Banding and liner options available; liner recommended for valances Right control will raise the bottom; left control will lower the top (standard control locations only) Available as Multiple Shades on One Headrail (maximum width of all shades 144" (365.8 cm)) 4" (10.2 cm) seclusion strip will be applied on blinds that are inside mount to conceal the headrail componentry (N/A on outside mount) Available with all valance options Not available with Looped Roman, Old Style, Angle Top Shades, Turned Headrail, Continuous-loop Lift, Motorized or Cordless Lift. Not available with Cut-outs Cut-Outs: Natural Shades For surcharge, see Options Pricing Available with Standard and Old Style Roman Shades Bottom corner Cut-out (Diagram A): maximum width: 6" (15.3 cm) cut-out any height (up to the headrail) Bottom center cut-out (Diagram B): maximum height: 5" (12.7 cm) Cut-out maximum width must leave 3" (7.7 cm) on each side of the cut-out Not available with: Hold-down Brackets, Fabric Edge Banding, Deco-Trim hems, Deco-Pocket Hems, Bottom Up/Top Down Shades, Cordless Lift, Continuous Lift or Looped Roman Shades W W H Cut-out H Cut-out Diagram A W W Diagram B 12

13 Options Multiple Shades On One Headrail: Natural Shades 1 2" (1.3 cm) gap For surcharges, see Options Pricing How to Measure 1. Measure overall width of area to be covered 2. Measure width of the area each shade is to cover; measure and specify left shade first, continuing to the right NOTE: minimum of 1 2" (1.3 cm) between shades for operating clearance 3. Total width of all shades, plus clearance (gap), must equal the overall headrail width 4. Use standard inside or outside measuring directions for height 5. For patio doors, measure height to within 1" (2.6 cm) of the floor either from the ceiling or a point high enough above door to provide clearance; cords should be on outside edges of shades; outside mount (wall) installation is recommended for patio doors NOTES: Shades operate separately Controls can be on the right or left at no charge Standard for two on one headrail: Left panel left control and right panel right control Standard for three on one headrail: Left panel left control; middle panel right control; and right panel right control Horizontal material alignment between panels is not guaranteed Liner options available Fabric Edge Banding is available will be attached around each panel Shades up to the maximum material width will have a continuous valance (see Shade Style and Option Availability Grid) Shades over maximum material width will have a valance with each panel which are butted in between each panel gap For Cordless Shades less than 17" (43.2 cm) in width: If finished shade width is: equal to 12" (30.5 cm) but less than 12½" (31.7 cm) equal to 13" (33 cm) but less than 13½" (34.3 cm) equal to 13½" (34.3 cm) but less than 14" (35.6 cm) equal to 14" (35.6 cm) but less than 14½" (36.8 cm) equal to 14½" (36.8 cm) but less than 15" (38.1 cm) equal to 15" (38.1 cm) but less than 15½" (39.4 cm) equal to 15½" (39.4 cm) but less than 16" (40.6 cm) equal to 16" (40.6 cm) but less than 16½" (42.0 cm) equal to 16½" (42.0 cm) but less than 17" (43.2 cm) equal to 17" (43.2 cm) but less than 17½" (44.5 cm) equal to 17½" (44.5 cm) but less than 18" (45.8 cm) equal to 18" (45.8 cm) or more Maximum height of shade is: " (39.1 cm) " (54.9 cm) 28" (71.1 cm) " (87.0 cm) " (102.9 cm) " (118.7 cm) " (134.9 cm) " (150.8 cm) " (166.7 cm) 72" (182.9 cm) " (198.8 cm) 86" (218.5 cm) 13

14 Bay And Corner Windows Available on Standard Roman and Old Style Roman shades Bay and Corner shades are used to butt two shades together in a corner window Pull cords can be on the right or left side of each shade; locating cords opposite of the corner is recommended Depending on the angle, some corner shades cannot be raised to the same height Bay and Corner shades not available with Hold-down brackets, Looped Roman shades and Turned Headrail Options Horizontal pattern alignment between shades cannot be guaranteed Price as standard shades, no additional surcharge Headrails will not be mitered Standard Valances will not be mitered Premiere Valances will be mitered NOTE: Manufacturer will take appropriate deduction for corner/ bay windows. If deductions are not required, do not order as corner/bay. Measuring Information Corner Window Measure: Width of each window from corner to the point you would like to cover. Three-sided Bay Window Measure: Business cards A B A Angle A-B B B C Angle B-C Business cards C A & C: Width of side windows from the corners to the point you would like the blind to cover. B: Width of the center window from corner to corner. Angle A-B: Angle between windows (A) and (B). Angle B-C: Angle between windows (B) and (C). Measure bay angle using protractor or angle finder. Or use two business cards in bay corner as illustrated and fax to customer service. CEILING FRONT VIEW CEILING Four-sided Bay Window Measure: ROOM WALL A B C D ROOM WALL A & D: Width of side windows from the corners to the point you would like the blind to cover. B & C: Width of each window from corner to corner. Angle A-B: Angle between windows (A) and (B). Angle B-C: Angle between windows (B) and (C). Angle C-D: Angle between windows (C) and (D). SIDE WALL SIDE WALL SIDE WALL ANGLE A-B ANGLE B-C ANGLE C-D SIDE WALL Measure bay angle using protractor or angle finder. Or use two business cards in bay corner as illustrated and fax to customer service. CEILING FRONT VIEW CEILING Five-sided Bay Window Measure: ROOM WALL SIDE WALL A E B C D SIDE WALL BACK WALL SIDE WALL SIDE WALL ANGLE B-C ANGLE C-D ANGLE A-B ANGLE D-E ROOM WALL A & E: Width of side windows from the corners to the point you would like the blind to cover. B, C & D: Width of each center window from corner to corner. Angle A-B: Angle between windows (A) and (B). Angle B-C: Angle between windows (B) and (C). Angle C-D: Angle between windows (C) and (D). Angle D-E: Angle between windows (D) and (E). Measure bay angle using protractor or angle finder. Or use two business cards as illustrated and fax to customer service. 14

15 Valance Options 6" (15.3 cm) Standard Valance Horizontal Orientation Options Valance: Natural Shades Standard Cord Controls No Charge Options 6" (15.3 cm) Valance with shade (horizontal orientation) No Valance is optional; unfinished headrail and hardware are visible Continuous-loop Lift and Motorized Lift No Charge Options 9" (22.8 cm) Valance with shade (horizontal orientation) 6" (15.3 cm) Valance is not available Additional Valance Information Edge Banding will be applied to the sides and bottom of the valance if option is chosen for complete finished shades Liner can be added to the valance at the time of order; must specify Privacy or Liner and color; see price chart for surcharge Valance Returns Outside Mount: Standard Standard Control = 1 1 2" (3.9 cm) Continuous-loop Lift and Motorized Lift = 2 1 4" (5.8 cm) Special valance return widths of 1 1 2" (3.9 cm) to 3 1 2" (8.9 cm) are available upon request Special 2" (5.1 cm) valance return length: Available upon request Inside Mount: Available upon request on inside mount shade Standard Control: 1 1 2" (3.9 cm) Special 2" (5.1 cm) valance return length: Available upon request No Liner or Edge Banding on valance returns Premiere Valance Option B Shown Seascape Valance: Natural Drapes No charge option for Premiere Valance at time of order. Must select options. No Valance is optional; aluminum headrail and hardware are visible Valance returns are 6" (15.3 cm) This design is scaled to the width of the shade. Dentil This design will repeat with the width of the shade. Cathedral Deco-Trim Valance Or Hems: Natural Shades For surcharges, see Price Charts Distinctive Valance and Hem designs with accent gimp Deco-Trim Valance or Hem designs are cut into the valance or hem of the shade to a depth of approximately 2 1 2" (6.4 cm). Deco-Trim Valance is 9" (22.8 cm) which is measured from the top of the headrail to the lowest point Deco-Trim Hems allow light through at the bottom of the shade; if complete privacy and light filtering are desired, add 2 1 2" (6.4 cm) to the ordered height Available with 9" (22.8 cm) Valance only Hem not available with Cut-out Must select accent gimp with Deco Valance or Hem This design will repeat with the width of the shade. Horizon This design is scaled to the width of the shade. 15

16 Valance Options Options Valance Only: Premiere Valance for Natural Shades and Drapes Upgrades A and C Upgrades B and D Upgrade E See price charts for shade or Valance only surcharge No charge option for Natural Drape at time of order Natural Shade material is mounted to a North American hardwood frame with mitered corner returns that attach separately. Valance upgrade options provides stable returns and a clean, uniform appearance Valance can be ordered for use alone or to complement other window treatments Valance material is attached to a hardwood frame. Includes mounting brackets (standard, ceiling, or projection brackets). Valance returns are available Valance returns are standard on outside mount woven wood Premiere Valance based on headrail depth Standard Cord Control Return sizes: Inside/Outside mount; Standard/Ceiling mounting brackets " (7 cm) Inside/Outside mount; Projected mounting brackets " (9.6 cm) Continuous Cord/Chain Loop and Motorization Return Sizes: Inside/Outside mount; Standard/Ceiling mounting brackets " (8.8 cm) Inside/Outside mount; Projected mounting brackets " (11.5 cm) Cordless Control Return sizes: Inside/Outside Mount: Standard bracket " (10.8 cm) Inside/Outside Mount: with 2" (5.1 cm) Extension brackets - 4" (10.2 cm) Inside/Outside Mount: with 2 5 8" (6.7 cm) Extension brackets " (11.6 cm) Inside/Outside Mount: with 3 1 2" (8.9 cm) Extension brackets " (14 cm) Special valance return widths available for outside mounts from 1 1 2" (3.9 cm) to 8" (20.4 cm) or inside mounts from 1 1 2" (3.9 cm) to 3" (7.7 cm) No special return height sizes are available Horizontal valance returns are not edge banded Special return valance widths of 1 1 2" (3.9 cm) to 8" (20.4 cm) available upon request Valances over maximum material width will be butted Fabric Edge Banding is available on 6" (15.3 cm) or 9" (22.8 cm) horizontal or vertical oriented material. Not available on Deco-Trim Options: A: 6" (15.3 cm) Valance with horizontal material orientation; edge banding is optional (not available with Motorized Lift and Continuous-loop Lift) B: 6" (15.3 cm) Valance with vertical material orientation; edge banding top and bottom mandatory (not available with Motorized Lift and Continuous-loop Lift) C: 9" (22.9 cm) Valance with horizontal material orientation; edge banding is optional D: 9" (22.9 cm) Valance with vertical material orientation; edge banding top and bottom mandatory E: 9" (22.9 cm) Deco-Trim Valance; no vertical orientation or liner option F: Wood Cornice: See Cornices and Valances Cost and Product Reference Guide NOTE: Horizontally oriented valances over will be spliced in 1 to 3 places and will not align with shade panels. Vertically oriented material will be one continuous piece. Hardwood frame will be spliced at 94" (238.7 cm) with returns and 95" (241.3 cm) without returns. Valance Summary Control Type/Shade Options Default No Charge Valance Available at Surcharge Standard Cord Control Standard 6" (15.3 cm) Standard 9" (22.8 cm); Premiere 6" (15.3 cm); Premiere 9" (22.8 cm); Deco Trim 9" (22.8 cm) Cordless Lift Premiere 6" (15.3 cm) Premiere 9" (22.8 cm); Deco Trim 9" (22.8 cm) Continuous-loop Lift Standard 9" (22.8 cm) Premiere 9" (22.8 cm); Deco Trim 9" (22.8 cm) Motorized Lift Standard 9" (22.8 cm) Premiere 9" (22.8 cm); Deco Trim 9" (22.8 cm) Bottom Up/Top Down with Cord Control Standard 6" (15.3 cm) Standard 9" (22.8 cm); Premiere 6" (15.3 cm); Premiere 9" (22.8 cm); Deco Trim 9" (22.8 cm) Natural Drape Premiere 6" (15.3 cm) or 9" (22.8 cm) Deco Trim 9" (22.8 cm) No Charge 16

17 Accent Gimp: Natural Shades Options See Price Charts for surcharge Required with 9" (22.8 cm) Deco-Trim Valance; optional on other horizontal material orientation valances Not available with vertically-oriented material 7 16" (1.1 cm) NOTE: Must choose Accent Gimp color when a Deco-Trim style has been selected for the valance or hem. Black Brown Chocolate Cream Dark Beige Maroon Toffee Deco-Pocket Hem: Natural Shades Dentil Hem with Accent Rod Cathedral Hem with Accent Rod For surcharges, see Options Pricing 3 day manufacturing time does not apply Distinctive hem designs with decorative accent rod and accent gimp 5 8" (1.6 cm) diameter metal rods with a classic ball finial, cut to width Accent Rod: maximum width 72" (182.9 cm) Deco-Pocket Hems also available without accent rod to add your own decorative hardware Deco-Pocket Hem designs are cut into the hem of the shades to a depth of approximately 4 1 2" (11.5 cm), allowing light through the bottom of the shades If complete privacy and light filtering are desired, add 4 1 2" (11.5 cm) to the ordered height Not available with Cut-out, Cordless Lift or Motorized Lift Rod Colors available: Espresso...84 Satin Nickel...59 Must select accent gimp with Deco Valance or Hem. 17

18 Angle Top: Natural Shades Options For surcharges, see Options Pricing 3 day manufacturing time does not apply For Angle Top Shades, supply all four measurements (A, B, C, D) as shown in the diagram below Shades will raise only to the bottom edge of the valance; the upper angled portion of the shades and valance cannot be opened and closed 6" (15.3 cm) and 9" (22.8 cm) standard valance only Valance requires gimp trim at the top edge by the headrail (A) Control location on low side only Not available with Looped Roman shades, Old Style Roman Shades, Bottom Up/Top Down, Continuous Cord Loop, Cordless, Motorized, Turned Headrail or Edge Banding Valance returns are not available D A Bottom Edge of Valance B Minimum Width: Maximum Straight Width: Minimum Height: Minimum Height (short side): Maximum Height: Maximum Degree of Angle 60º 18" (45.8 cm) (outside mount) " (47 cm) (inside mount) 60" (152.4 cm) (outside mount) " (153.6 cm) (inside mount) 10" (25.4 cm) 7 1 2" (19.1 cm) 120" (304.8 cm) C Measuring Outside Mount: 1. Measure exact width and height of area to be covered. It is recommened that shades overlap window frame or opening by 1 1 2" (3.9 cm) on each side. 2. Measure height of opening on left side and mark this dimension "left". Allow for overlap as desired: 1 1 2" (3.9 cm) on top and bottom is recommended. 3. Measure height of opening on the right side and mark this dimension "right". Allow for same overlap as left side. 4. Factory will determine the angle from these three dimensions. Turned Headrail: Natural Shades No charge Headrail turned 90 degrees to allow for a smaller inside mount shade or for use on French Doors Available as inside or outside mount; headrail mounted by placing mounting screws through headrail directly into mounting surface Minimum depth required: 3 4" (2.0 cm) Standard Corded Roman option only 6" (15.3 cm) standard or 9" (22.8 cm) Deco trim valance available options; see Price Charts for surcharge Not available with Bay or Corner windows, Bottom Up/Top Down Valance returns are not available 18

19 Style Name Amour Anyi Ascot Beachfront Color Name and Color Number Radiant Regal Royal Rye Taupe Cashmere Kersey Surf Thatch Privacy Liner Color and Number Cocoa Cocoa Cocoa Liner Color and Number **NOTE: The Privacy Liner is colored front and back; please order White if a neutral color is needed facing the street. All Liner colors are neutral facing the street. Liners can be reversed upon request; when reversed, the colored side of the liner will face the street with the neutral side of the liner facing the shades Cocoa 0297 White Cocoa Cocoa Cocoa Cocoa Beikan Amber Boardwalk Pier Promenade Chencun Merlot Cocoa 0297 Cocoa 5297 White White Dalan Amaretto Saddle Cocoa 0297 Cocoa 5297 Escape Forest Cocoa 0297 Cocoa 5297 Island Inan Umber Agate Black Coffee 0632 Black Coffee 5632 Lipo Ambrosia Earthtones Cocoa 0297 Cocoa 5297 Java Black Coffee 0632 Black Coffee 5632 Liren Butternut Lutan Pecan Majian Meilin Merino Driftwood Natural Toffee Truffle Camel Chroma Henna Onyx Burgos Castilla Cocoa Black Coffee 0632 Cocoa 0297 Black Coffee 0632 Black Coffee 0632 White 0417 Cocoa Black Coffee 5632 Cocoa 5297 Black Coffee 5632 Black Coffee Ningtu Tortoise Revelry Birdnest Dusk Cocoa Cocoa Sand Piper Saterra Azure Dunes Terrain Cocoa Cocoa Serenity Haze White Shatian Raisin Cocoa 0297 Cocoa 5297 Umber Taima Chestnut Cocoa 0297 Cocoa 5297 Terrestrial Toushan II Alpaca Angora Camel Mocha Taupe General Information Suggested Privacy And Liner Color Coordination White Cocoa Cocoa Wuxi Zebra Yunnan Chocolate Cocoa 0297 Cocoa 5297 Zishan Auburn Stardust Toast Cocoa Cocoa

20 Stack Charts: Natural Shades General Information NOTE: For shades, stack height is measured from the top of the headrail to the lowest point of the shades when completely raised. Stack heights are approximate and will vary by material. Stack Height: Natural Shades Standard Cord Lift Standard Roman Old Style Roman Turned Headrail Roman Continuous-loop Lift Motorized Lift Standard Roman Old Style Roman Standard Cord Lift Looped Roman Continuous-loop Lift Looped Roman Standard Cord Lift Bottom Up/Top Down Roman Cordless Lift Standard Roman Height of Shade Up to No Liner STANDARD HEM Privacy or Liner No Liner DECO-TRIM HEM DECO-POCKET HEM Privacy or Liner 30 (76.2) ( ) ( ) ( ) ( ) 50 (127.0) ( ) ( ) ( ) ( ) 70 (177.8) ( ) ( ) ( ) ( ) 90 (228.6) ( ) ( ) ( ) ( ) 110 (279.4) ( ) ( ) ( ) ( ) 120 (304.8) ( ) ( ) ( ) ( ) 30 (76.2) ( ) ( ) ( ) ( ) 50 (127.0) ( ) ( ) ( ) ( ) 70 (177.8) ( ) ( ) ( ) ( ) 90 (228.6) ( ) ( ) ( ) ( ) 110 (279.4) ( ) ( ) ( ) ( ) 120 (304.8) ( ) ( ) ( ) ( ) 30 (76.2) ( ) ( ) ( ) ( ) 50 (127.0) ( ) ( ) ( ) ( ) 70 (177.8) ( ) ( ) ( ) ( ) 90 (228.6) ( ) ( ) ( ) ( ) 110 (279.4) ( ) ( ) ( ) ( ) 120 (304.8) ( ) ( ) ( ) ( ) 30 (76.2) ( ) ( ) ( ) ( ) 50 (127.0) ( ) ( ) ( ) ( ) 70 (177.8) ( ) ( ) ( ) ( ) 90 (228.6) ( ) ( ) ( ) ( ) 110 (279.4) ( ) ( ) ( ) ( ) 120 (304.8) ( ) ( ) ( ) ( ) 30 (76.2) ( ) ( ) ( ) ( ) 50 (127.0) ( ) ( ) ( ) ( ) 70 (177.8) ( ) ( ) ( ) ( ) 90 (228.6) ( ) ( ) ( ) ( ) 110 (279.4) ( ) ( ) ( ) ( ) 120 (304.8) ( ) ( ) ( ) ( ) 30 (76.2) ( ) ( ) 50 (127.0) ( ) ( ) 70 (177.8) ( ) ( ) 90 (228.6) ( ) ( ) 110 (279.4) ( ) ( ) 120 (304.8) ( ) ( ) N/A N/A 20

21 Stack Charts: Natural Drapes General Information NOTE: For drapes, stack width is measured from the outside of the drapes to the inside of the drapes. Stack widths are approximate and will vary by material. Natural Drapes 10% Standard Fullness Stack Chart Width of Shade Up to 27 (68.6) 40 (101.6) 51 (129.6) 63 (160.0) 75 (190.5) 88 (223.6) 102 (259.1) 115 (292.1) 128 (325.1) 141 (358.1) 157 (398.8) 170 (431.8) 183 (464.8) 192 (487.7) Minimum Range Thinner Fabrics 5-7 ( ) 7-9 ( ) 9-11 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) CORD CONTROL WAND CONTROL Single Stack Split Stack, Each Side Single Stack Split Stack, Each Side Minimum Range Thicker Fabrics 7-9 ( ) 9-13 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thinner Fabrics 3-4 ( ) 4-5 ( ) 5-6 ( ) 6-7 ( ) 7-8 ( ) 8-9 ( ) 9-10 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Natural Drapes 60% Fullness Stack Chart CORD CONTROL Minimum Range Thicker Fabrics 5-6 ( ) 6-7 ( ) 7-8 ( ) 8-9 ( ) 9-10 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thinner Fabrics 6½ - 9 ( ) 9-11 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thicker Fabrics 9-12 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thinner Fabrics 5½ - 7½ ( ) 7½ - 9 ( ) 9-10½ ( ) 10½ - 12 ( ) 12-13½ ( ) 13½ - 14½ ( ) 14 ½ - 15" ( ) 15½ - 16½ ( ) 16½ - 18 ( ) ( ) ( ) ( ) ( ) ( ) WAND CONTROL Minimum Range Thicker Fabrics 7½ - 9½ ( ) 9½ - 11½ ( ) 11½ - 13½ ( ) 13½ - 15 ( ) 15-16½ ( ) 16½ - 18 ( ) 18-19½ ( ) 19½ - 21 ( ) 21-22½ ( ) 22½ - 24 ( ) ( ) ( ) ( ) ( ) Single Stack Split Stack, Each Side Single Stack Split Stack, Each Side Width of Shade Up to 27 (68.6) 40 (101.6) 51 (129.6) 63 (160.0) 75 (190.5) 88 (223.6) 102 (259.1) 115 (292.1) 128 (325.1) 141 (358.1) 157 (398.8) 170 (431.8) 183 (464.8) 192 (487.7) Minimum Range Thinner Fabrics 6-8½ ( ) 8½ - 13 ( ) ½ ( ) 15½ - 18 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thicker Fabrics 8½ - 14 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thinner Fabrics 3½ - 6 ( ) 6-8 ( ) 8-10 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thicker Fabrics 6-9 ( ) 9-12 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 21 Minimum Range Thinner Fabrics 8-12 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thicker Fabrics ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thinner Fabrics 7-9 ( ) 9-11 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Minimum Range Thicker Fabrics 9-12 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )

22 General Information Standard Roman And Looped Shade Product Detail: Natural Shades Standard Roman Standard Roman Turned Headrail (Direct mount shade: no returns available) 2 2" (5.1 cm) Short Return Standard Return Old Style Roman Looped Roman Standard cord control (lift cords are behind the shade; outside mount shown). 4" (10.2 cm) seclusion strip is used on inside mount Hardwood Headrail Made from sustainable hardwood resources 2. Standard Installation Brackets / Turned Headrail Screws Steel 3. Lift Cord Color coordinated 1.8 mm cord with filler for durability 4. Safety Cord Cleat (optional) Prevents cord from twisting and provides the ability to enhance safety in homes with children and pets Standard clear cord cleat (shown) Decorative cord cleat (solid brass or antique brass) 5. Hold-down Brackets (optional) Secure bottomrail to door, wall, or window sill; must be specified at time of order 6. Wood Tassel Color coordinated to the shade 7. Valance 6" (15.3 cm) valance standard 5 Full Recessed Depth Type of Mounting Bracket Standard or Deco-Finish Valances 3 4 Standard and Ceiling Brackets Projection Brackets Decorative Cord Cleats 2 1 2" (166.7 cm) 3 1 2" (166.7 cm) 6 5 Solid Brass Antique Brass 22

23 General Information Continuous-Loop Lift Control And Cordless Lift Product Detail: Natural Shades Hardwood Headrail Made from sustainable hardwood resources 2. Standard Installation Brackets Steel 3. Continuous-loop Lift Cord Color coordinated to the shade Length stays consistent regardless of shade height Over 30 square feet (2.7 m 2 ), metal bead chain is required, optional for shades under that size Safety Cord Guide Prevents cord from twisting and enhances safety in homes with children and pets 5. Hold-down Brackets (optional) Secure bottomrail to door, wall, or window sill; must be specified at time of order 6. Valance 9" (22.8 cm) valance standard 4 Full Recess Depth Type of Mounting Bracket Standard and Ceiling Brackets Projection Brackets Standard or Deco-Finish Valances 3 3 8" (166.7 cm) 4 3 8" (166.7 cm) 5 Safety Cord Guide Safety Chain Guide Cordless Shades Product Detail: Natural Shades Durable Headrail with Natural Material Valance Classic 1 1 2" (3.9 cm) high x 2 1 8" (5.4 cm) deep 2. Mounting Brackets Designed for easy and trouble-free installation 5 3. Clear Hand Grips Guide to raise and lower blinds 4. Hold-down Bracket (optional) Secures blind to door, wall or window sills 5. Valance Full Recess Depth - Cordless 3 4 Type of Mounting Bracket Mounting Bracket Standard or Deco-finish Valances 4 1 4" (10.8 cm) 2" (5.1 cm) Projection Bracket 5" (12.7 cm) 2 5 8" (6.7 cm) Projection Bracket " (14.1 cm) 3 1 2" (8.9 cm) Projection Bracket 6" (15.3 cm) 23

24 General Information Bottom Up/Top Down Corded Shades Product Detail: Natural Shades Durable Headrail with Natural Material Valance Made from sustainable hardwood resources 2. Mounting Brackets Designed for easy and trouble-free installation 3. Hold-down Bracket (optional) Secures blind to door, wall or window sills 4. Safety Cord Cleat Prevents cord from twisting and provides the ability to enhance safety in homes with children and pets Standard clear cord cleat (shown) included Decorative cord cleat (solid brass or antique brass) optional 5. Valance 3 Full Recessed Depth Type of Mounting Bracket Standard and Ceiling Brackets Projection Brackets Standard or Deco-Finish Valances 2 1 2" (6.4 cm) 3 1 2" (8.9 cm) Decorative Cord Cleats (optional) Solid Brass Antique Brass 24

25 General Information Control Options Product Detail: Natural Drapes Standard Cord Control Aluminum Headrail Rust-resistant 2. Headrail and Valance Installation Brackets 3. Cord and Tension Pulley Hidden by drape 60% Fullness Standard Fullness Optional Wand Control Aluminum Headrail Rust Resistant 2. Headrail and Valance Installation Brackets 3. Slimline Wand Hangs from back of shade 3 Standard Fullness NOTE: Natural materials are vertically oriented on the Natural Drapes and Valance. 60% Fullness 25