Energy, Environment and Sustainable Development. Publishable Final Report (Deliverable 18)

Transcription

1 Energy, Environment and Sustainable Development Ecocity URBAN DEVELOPMENT TOWARDS APPROPRIATE STRUCTURES FOR SUSTAINABLE TRANSPORT Publishable (Deliverable 18) Contract number: Project title: Project acronym: EU-Research Programme Key Action Project co-ordinator: EVK4-CT Urban Development towards Appropriate Structures for Sustainable Transport Ecocity 5 th Framework Programme City of Tomorrow and Cultural Heritage Prof. Dr. Uwe Schubert Tel: Fax: uwe.schubert@wu-wien.ac.at Project Homepage:

2 Contents 6.1. Background Scientific/technological and socio-economic objectives Applied methodology, scientific achievements and main deliverables... 5 Methodology... 5 Planning process... 5 Evaluation... 7 Ecocity Consultancy Strategy... 7 Scientific achievements... 7 The vision of an ECOCITY... 8 The importance of interrelations and context... 9 ECOCITY Objectives...12 Location of new development...21 Location of facilities...23 Concepts for ECOCITY model settlements...24 Bad Ischl...24 Barcelona...25 Gyoer...26 Tampere...28 Trnava...29 Tuebingen...30 Umbertide...31 Implementation and Maintenance...33 Evaluation...35 Main deliverables...35 The ECOCITY handbook consists of two parts:...35 Presentation on the website Conclusions including socio-economic relevance, strategic aspects and policy implications...36 Conclusions:...36 Socio-economic relevance and policy implications: Dissemination and exploitation of results Main literature produced...37 IUW 2

3 DETAILED REPORT (Section 6) URBAN DEVELOPMENT TOWARDS APPROPRIATE STRUCTURES FOR SUSTAINABLE TRANSPORT 6.1. Background According to the Communication from the Commission, Sustainable urban development in the European Union: a framework for action, around 20% of the EU population live in large conurbations of more than 250,000 inhabitants, a further 20% in medium-sized cities of 50,000 to 250,000 inhabitants, and 40% in smaller towns of 10,000 to 50,000 people 1. This means that 80% of the European population live in urban areas and the majority of these people live in small to medium-sized towns and cities. The EU-funded ECOCITY project looked at the sustainable development of just such urban areas with a strong ecological perspective. The challenges in urban development differ somewhat with the size of the settlement (in small towns it can be more difficult to establish an attractive public transport system, for example), but one problem is common to all: During recent decades, urban growth usually happened in ways contradictory to the concept of sustainable settlement development, although this concept is theoretically agreed upon in many of the relevant policies. Suburbanisation produced spatially diffused and functionally segregated settlement structures sprawl in belts around cities and towns, while the population of the generally more compact historic parts declined. This continuing trend causes growth in traffic volumes, resulting in increased pressures on the environment (such as pollution from exhaust fumes or climate problems due to carbon dioxide). It also compromises the effects of many measures aimed at promoting sustainable transport modes. As a result of these growth patterns, resources such as land and energy, which should be preserved for future generations, are used excessively. Large areas are occupied by the structures of sprawl and the consumption of limited fossil fuels continues to increase, especially for transport. The environment, which should provide a basis for the life of future generations, as well as human health and overall quality of life are impaired by the effects of this excessive use of resources. In contrast to these trends, a broad consensus on basic principles of sustainable urban (settlement) development, such as decentralised concentration (polycentric structure) and a balanced mix of different land uses (residential, working, shopping, leisure, etc.) in a compact structure implying short distances, is to be found from global (United Nations, HABITAT Agenda) down to the national and even municipal level. The objectives of the European Union for the development of sustainable settlements and for the improvement of urban environments specifically include to support a polycentric, balanced urban system and to promote resource-efficient settlement patterns that minimise land-take and urban sprawl. 1. Such patterns are further described in the Communication from the Commission Towards a thematic strategy on the urban environment (and in other EU policy documents on this topic) as, the favoured vision of high-density, mixed-use settlements with reuse of brownfield land and empty property, and planned expansions of urban areas rather than ad hoc urban sprawl 2. 1 Commission of the European Communities (1998): Sustainable Urban Development in the European Union: A Framework for Action, p.2 as well as pp. 6 and 15 respectively; Communication from the Commission to the Council, the European Parliament, the Economic and Social Committee and the Committee of the Regions. Brussels. 2 Commission of the European Communities (2004): Towards a Thematic Strategy on the Urban Environment, p. 30; Communication from the Commission to the Council, the European Parliament, the Economic and Social Committee and the Committee of the Regions. Brussels. IUW 3

4 High density and mixed use are characteristic for pedestrian-oriented settlement patterns. The need to design urban patterns which are favourable for sustainable transport is emphasised in many recent concepts and also in the objective of the Key Action City of Tomorrow and Cultural Heritage (under which the ECOCITY project was realised) to reduce radically urban pollution and congestion, while ensuring safe, accessible and affordable mobility, through long-term strategic approaches towards land-use patterns favourable to the development of alternatives to the private car 3. The need for such strategic and long-term approaches is particularly crucial because of the long lifespan of buildings and the resulting slow rate of change in existing building stock. The effects of today s land-use and urban planning measures on travel demand are therefore long-term, meaning that land-use planning measures set the urban patterns upon which mobility patterns are based for generations. Thus unsustainable developments cause long-term problems, but if we can build in sustainability-oriented (e.g. travel-minimising) features into new development, we could expect these to be a worthwhile investment prevailing over decades to come. 4. The ECOCITY project was a component of the Land Use and Transportation Research (LUTR) cluster, which linked 12 synergetic projects looking at sustainable urban mobility in conjunction with land use and environmental issues. The common objective was to develop strategic approaches and methodologies in urban planning which contribute to the promotion of sustainable urban development. This includes the connections between transportation demand and land-use planning, the design and provision of efficient and innovative transportation services, including alternative means of transportation, and the minimisation of negative environmental and socio-economic impacts (more information at: Scientific/technological and socio-economic objectives The overall goal of the project was to develop settlement patterns for sustainable cities, emphasising the implications for an environmentally compatible transport system and furthermore creating a framework for the integration of sustainable solutions across all relevant sectors to generate the model of an ECOCITY with an urban environment promoting sustainable lifestyles implying higher quality of life and reduced consumption of resources. The aim of designing model settlements for specific sites in the seven involved communities was to intensify the implementation of agreed principles and to demonstrate the feasibility and desirability of future urban living compatible with sustainability requirements. As alternative to urban sprawl a strategy for sustainable settlement planning is developed to determine appropriate locations for sustainable urban development in relation with sustainable transport. The settlement structure should be especially determined by an optimal transport network with the shortest paths possible for pedestrians and direct lines for public transport according to the mobility demand of people. The desired result should be, that people choose walking most of the time, cycling and public transport frequently, but the automobile only occasionally. Additionally the requirements of an efficient energy supply (promoting solar architecture and the utilisation of renewable energy sources) should be considered. New settlements should be developed complementary to existing neighbouring settlements in a region (especially the community centre) - planning is co-ordinated, sustainable solutions in new settlements should work as incentive for the improvement of the neighbouring settlements. The concepts for the sustainable model settlements should be evaluated to derive planning tools for sustainable settlement structures. 3 European Commission, DG Research ( ): Guide for Proposers, RTD Priority 4.4.1»Strategic approaches and methodologies in urban planning towards sustainable urban transport«, Key Action 4:»City of Tomorrow and Cultural Heritage«of the Thematic Programme»Energy, Environment and Sustainable Development«within the 5 th Framework Programme. 4 Marshall, S., Lamrani, Y. (2003):»Planning and Urban Mobility in Europe«(PLUME, Cluster LUTR), Synthesis Report: Land Use Planning Measures, p. 1, [accessed: March 2005] IUW 4

5 6.3. Applied methodology, scientific achievements and main deliverables Methodology In the following paragraph two aspects of the methodology applied are dealt with: the management of the work on the project in phases and the methods used for planning and evaluation. An additional outcome was a method to improve the quality of planning results by a consultancy strategy. The project was carried out in three phases: in Phase 1 existing concepts, guidelines, criteria and indicators for sustainable settlement development as well as implemented examples of new quarters, public transport oriented linear urban development, car-free housing, etc. (good practice) were collected by Internet-investigation and reviewed to document the state of the art. Based on this input a conceptual framework was defined, including objectives and principles for settlement development towards an ECOCITY, considering the interrelations between different sectors. In Phase 2, based on the above objectives, the concepts for the sustainable model settlements were elaborated in cooperation with the relevant local communities (as local counterparts community committees were established). In Phase 3 a scheme of criteria and indicators was compiled and used to evaluate the concepts. In this project four sectors are regarded as important for urban development: urban structure, transport, energy and material flows, and socio-economy. These sectors each comprise a number of aspects which were used to structure the conceptual framework as well as the concepts for the model settlements. URBAN STRUCTURE Demand for land / density Land use (mixed use) Public space Landscape / green spaces, water Urban comfort Buildings TRANSPORT ENERGY AND MATERIAL FLOWS Energy SOCIO-ECONOMY Transport of persons Slow modes / public transport Transport of persons Individual motorised travel Transport of goods Water (supply, treatment) Waste Building materials Social Issues Economy Costs Sectors and aspects of urban development The most substantial part of the project was the planning process in phase 2. Planning process The complexity of urban development, including a multitude of sectors and especially the consideration of ecological/sustainability aspects require an integrated planning process, which should also be co-ordinated with the subsequent management of buildings and infrastructure. A multidisciplinary planning team, including experts for the above sectors needs to co-operate in such a planning process. The distribution of tasks among the members of the team and the specification of the tasks in a work plan (elaborated in cooperation of the members) was realised to be necessary to organise the work and should be done at the start of the planning work. Continuous communication in meetings or via information technologies was important to exchange information and co-ordinate the work. Interactive and participatory elements need to be integrated in the planning process, which should accompany the work from the beginning of planning and continue beyond the implementation of the project (to involve the inhabitants in further necessary decisions), to achieve both the best possible sustainable urban design quality and the broadest possible consensus. IUW 5

6 Planning was carried out in the following steps: 1 Pre-planning The process started with a site analysis to provide a basis for urban planning. This activity focussed on a survey of landscape, including an inventory of sensitive green areas worth being protected (e.g. forests, big trees) and an analysis of connections with the existing transport networks (pathways, roads) as well as on a survey of the relations with the wider surroundings covering the daily urban system of the future inhabitants of the Ecocity Settlement (community, region), including an inventory of facilities for mixed use in adjacent areas. 2 Urban planning The urban patterns of the model settlements were designed in an iterative process, improving the quality of the plans step by step in co-operation of all partners of the planning team and in co-ordination with the community committee. Scenarios were developed, then detailed and finally merged into a master-plan in meetings of the team. The scenarios also proved to be useful to support the debate in the participation process towards consensus. Strategies for planning the urban patterns of the model settlements gave priority to the requirements of sustainable transport modes. Most important for making an urban structure appropriate for pedestrians (and for cycling) are short distances (requiring a compact city with qualified density, a balanced mixed land use and a limited size of the total area) and attractive pathways through a diversified surrounding in public spaces of high aesthetic quality. Most important for public transport is the appropriate selection of sites for new construction, respectively for a new settlement to achieve a linear polycentric development and a decentralised concentration in walking distance around stops (stations) of public transport lines providing for a high passenger potential. Qualified urban density can be achieved by balancing high building density as a requirement for reducing demand for land achieving short distances promoting the viability of attractive infrastructure facilities and public transport services with the requirements of sufficient distances between buildings for day-lighting and utilisation of solar energy sufficient open and green spaces for social contact and recreation near the apartments to make the structure liveable 3 Detailed planning Planning of the model settlements was detailed in the form of sectoral concepts for urban planning (especially on the facilities for mixed use to be integrated) transport (with focus on a public transport system, pedestrian and cycling networks, efficient distribution logistics), energy as well as social and economic requirements (to provide services for the inhabitants and employment possibilities), which resulted also in adaptations to improve the draft master-plan. As stated above this planning process should be accompanied by: Interaction and citizens participation Exchange of information and opinions in a consultation process is considered a minimum requirement for planning an ECOCITY, but the goal is comprehensive participation including actual influence on the planning process or even direct influence on decision-making. For composing the participation process appropriate tools were selected from the broad range of community planning tools available to be applied in the various stages of planning, e.g.: Community Committees consisting of key representatives of the local administration (planners from the municipality), political parties and members of the city council, and other important interest groups and stakeholders were established in all involved municipalities. IUW 6

7 Community Planning Events (such as Community Conferences or Community Planning Weekends) were organised, starting with listing problems, proceeding with developing ideas for potential solutions (turning criticism into constructive dialogue) and ending with the discussion of possibilities for realisation. Possible elements are: pre-interviews with people from key interest groups for preparation, topic based 'Future Workshops' for collection of ideas (on small cards, which are grouped onto different boards to identify key themes), planning sessions for designing plans on a collaborative basis in groups of non-professional participants assisted by experts, discussion of possibilities for progress of the project, deriving a vision for the future and/or improvements to the previous plans by the planning team based on results of the participation sessions. Community Planning Events can be applied as an instrument in various stages of a project: in the first design phase to support the development of the basic concept, later to achieve quality improvements for the urban design, to create a consensus vision (for a final master-plan) or to create an atmosphere of trust and confidence between the key actors and informal supporters. Resources spent for an efficient participation process may pay off by avoiding delays, by improving the quality of plans through input of local knowledge and/or by creating benefits for all participants in win-win-situations. Evaluation Criteria, selected in relation to the Ecocity-objectives, were combined in an "Ecocity Evaluation Scheme" as a tool for the assessment of the Concepts for the Ecocity Model Settlements developed in this project to check their contribution to sustainable development and the quality of urban living. It is structured following the sectors: urban structure, transport, energy flows, material flows and socio-economic issues. One or several qualitative or quantitative indicators were assigned to each criterion. Benchmarks with a scale from A (best/innovative) to E (worst) were defined for each indicator, with D determined by the state of the art. The necessary data were collected by means of data demand sheets. During the project the necessity arose to develop a method for improving the quality of urban planning: Ecocity Consultancy Strategy To meet the identified need for improving the plans for particular Ecocity-sites some experts were selected among the partners to establish an international multidisciplinary group (especially for the fields of sustainable urban planning, transport planning and interactive group dynamics), the so called "Quality Support Group". Members of this group joined the local planning team in a workshop to identify weak aspects of the plans and develop more appropriate solutions by means of an exchange of experience and knowledge. To involve responsible local planners and stakeholders was considered helpful to increase the chance for acceptance of the plans (interaction). The list of Ecocity-Objectives and -Measures was used to check the compatibility of the developed plans and concepts with the main requirements for an ECOCITY. A Self Assessment Questionnaire was elaborated for a check of the developed plans and concepts, focussing on urban patterns, by the teams themselves. The questions are asking for justification of solutions/measures (e.g.: What makes the urban structure appropriate for pedestrians & cyclists?). The answers turned out to be useful as basic information for the preparation of the external assistance by the "Quality Support Group". The experience in the project showed, that consultancy by external experts can increase the quality of urban planning by providing additional knowledge. Thus the establishment of an international multidisciplinary consultancy group for urban development projects is recommended. Scientific achievements The main results of the project were a conceptual framework for sustainable (urban) settlement development including the vision of an ECOCITY and objectives for the relevant sectors of settlement development (Phase 1) as well as concepts for sustainable model settlements in seven municipalities in the stage of drafting master plans (Phase 2). IUW 7

8 The vision of an ECOCITY Considering the long lifespan of buildings, settlement patterns for the future (ECOCITIES) need to be sustainable in the original sense, to ensure a basis of living for future generations. Thus urban development has to meet the main requirements for sustainability, that the rate of resource use is not greater than the rate of their regeneration and that the rate of emission is not greater than the rate at which the pollutants can be absorbed. This can be expressed in the objectives of minimising use of land, energy and materials minimising the impairment of the natural environment. Settlement patterns for the future need also to be liveable, to be attractive for the present generation. The equivalent objective is: maximising human well-being (quality of life) As stated in the project objectives (Chapter 6.2) appropriateness for sustainable transport is an essential requirement for the sustainability of urban patterns. the main objective for this sector is: minimising transport demand Transport is the sector interrelated strongest to the urban patterns and thus the above objectives are also closely linked: A main requirement for minimising transport demand is higher density (city of short distances), which contributes to minimise land demands. Minimised transport demand results in minimising material and energy consumption (for motorised means of transportation) as well as in minimising the impairment of the natural environment and also the impairment of health and safety of the inhabitants (caused by transport, predominantly car-traffic), thus maximising human well-being. And all this also results in economic efficiency, minimising costs. These interrelations show, that an ECOCITY offers many benefits, ranging from personal convenience to global sustainability. All the actors involved individuals, groups and institutions can gain: an ECOCITY offers more space for people in an attractive, safe and quiet environment and also has lower life cycle costs and is less costly in relation to repairing negative impacts on human health and the environment. A vision of the final aim is necessary to be able to direct urban development towards an ECOCITY, promoting awareness of the idea. The envisioned patterns of the ECOCITY must meet the above objectives for sustainability and liveability to provide the above benefits. The most important characteristics of ECOCITY patterns can be summarised in following description: An ECOCITY is composed of compact, pedestrian-oriented, mixed-use quarters or neighbourhoods, which are integrated into a polycentric urban system in public-transportoriented locations. In combination with attractively designed public spaces, integrating green areas and objects of cultural heritage to create varied surroundings, an ECOCITY should be an attractive place to live and work. Such sustainable and liveable structures contribute to the health, safety and well-being of the inhabitants and their identification with the ECOCITY. For this project, an ECOCITY was defined as a vision of a sustainable and liveable city or town to be implemented in a smaller settlement unit, i.e. a model quarter or neighbourhood as an example for the community as a whole. The ECOCITY vision is illustrated by comprising features of a sustainable community from all the relevant sectors of urban development in a graphic. In addition to aspects related to the design of the urban structure and the transport system, there are also features relating to energy and materials, a community s way of life and the urban economy. According to the focus of the ECOCITY project on the context of settlement patterns and transport system the feature City of short distances, which is strongly related to both, occupies a central position. The following graph summarises the elements of the vision. IUW 8

9 City of accessibility for everyone City with public space for everyday life City in balance with nature City with integrated green areas City of bioclimatic comfort City of minimised demand for land Vision of an ECOCITY City for pedestrians, cyclists and public transport City of reduction, re-use and recycling of waste City contributing to closed water cycles City of balanced mixed use City of short distances City with new balance of concentration and decentralisation City as network of urban quarters City as power station of renewable energies City of health, safety and well-being City of sustainable lifestyle City of qualified density City of human scale and urbanity City for strong local economy City built and managed with the inhabitants City of development concentrated at suitable sites City integrated into the surrounding region City of minimised energy consumption City integrated into global communication networks City of cultural identity and social diversity Vision of an ECOCITY The importance of interrelations and context To be able to find appropriate solutions for the complex system of a settlement (ECOCITY) it is useful to consider the multifaceted interrelations between the sectors of the system, but also the context between the settlement and the surrounding area. From the interrelations between the main sectors of urban development - Urban Structure, Transport, Energy and Material Flows, Socio-Economy - the project ECOCITY focussed on the interrelation between Urban Structure and Transport. But to describe the complexity requires to go more into detail, considering the important aspects of these sectors (see table "Sectors and aspects of urban development"), e.g. the aspects density and mixed use of the sector Urban Structure are interrelated to the aspect slow modes of the sector transport. As a more comprehensive (but surely not complete) example the interrelations of one of the aspects - Land use ("Mixed Use") - with all relevant other aspects are described, showing the influence of the selected aspect on the others and vice versa: Influence of Mixed Use on Public Space: Different facilities for mixed use increase the variety and people visiting the facilities result in vitalisation of public space Urban comfort: good accessibility of facilities is comfortable for the inhabitants Slow modes (pedestrians): A balanced mixed use contributes to short distances appropriate for walking Individual motorised travel (car-traffic): Short distances reduce the necessity of car-trips Transport of goods: Short distances facilitate bringing bought goods home Energy (efficient utilisation): Replacing car-trips by walking avoids energy consumption Social Issues: a balanced mixed use provides best access for all inhabitants to the different facilities Costs: Short distances reduce costs IUW 9

10 Influence on Mixed Use of Land-demands / Density: Higher density provides larger potential of users to make facilities of mixed use economical Public Space: social meeting points in areas with priority for pedestrians provide synergies Buildings: Flexible buildings allow adaptation for different uses Transport of goods: The location of facilities should be appropriate for efficient delivery (logistics) Social Issues: The behaviour of people is important for the success of a balanced mixed use Economy: An increasing number of working places (tertiary sector) is compatible for a mix with residential use Costs: Low transport costs allow longer trips to facilities promoting large monofunctional facilities outside residential areas (sprawl) The particular aspects can have positive or negative impacts on interrelated aspects. To know these interrelations helps to strengthen positive and to avoid negative impacts. The context between urban development and its natural and built environment concerns the integration of new built structures into the existing surrounding, considering the characteristic of the region. The natural environment, including natural (without conscious human intervention) and agricultural parts, provides the basis for human settlements. Therefore the protection of the surrounding landscapes and their natural elements, avoiding destructive impacts and using the natural resources only in a sustainable way, is an essential objective for ECOCITY planning. Considering the context with urban development means to provide convenient access to the surrounding landscape (as nearby recreation area) to supply the settlement from the regional and preferably also organic food production and to preserve natural, green areas within the development area - especially those worth being protected - and integrate them into the settlement. To provide habitat networks it is important to maintain or create green corridors connecting green zones within the settlement and with the surrounding landscape. The natural environment also comprises the climatic, topographical and geological setting, which is an important framework condition for planning. The built environment includes existing parts of settlements and ensembles of buildings as well as networks (especially for transport). It is important to use historical urban grain, traditional for the region, as basis for the design of new structures, considering cultural heritage and to derive the design of new buildings from characteristic regional building forms or constructions for preserving and creating a local identity. For the accessibility it is essential to integrate new pathways within the settlement into the pathway network of adjacent neighbourhoods and to integrate new transport routes into the existing regional network (external cycling paths, local, regional and supra-regional public transport). The regional and municipal energy and material flows should also be considered. The context of social and economic development in existing and newly planned structures concerns the integration of new inhabitants into the existing population in the neighbouring areas, striving for better human relations by creating contacts between them, and the integration of new facilities into the economic structure, considering the facilities existing in the community and in the region. To respect this natural and anthropogenic context is an important requirement for planning an ECOCITY. In this project objectives for the surrounding (landscape, neighbouring parts of a municipality, region) in context with a new structure were formulated and specified. IUW 10

11 Table: Objectives and Specifications for the Proper Consideration of the Context NATURAL ENVIRONMENT > Strive for the protection of the surrounding landscape Preserve bio-diversity and habitats in the surrounding landscape Minimise impact of harmful substances on vegetation, wildlife and water systems Preserve or re-establish green corridors on the regional and municipal scale as open space connections Consider the boundaries of the city as a zone for an exchange between city and landscape (water cycle, vegetation, wildlife, recreation) and create conditions for the penetration of the surrounding landscape into the city Establish sound measures to avoid unplanned future extensions of settlements Strive for a recultivation of landscape in areas with a declining population or industry ( shrinking cities ) > Make sustainable use of the surrounding landscape as social and economic resource Offer recreation areas in the surrounding landscape with attractive connections from neighbourhoods to support the relation of people to the surrounding nature and to avoid weekend recreation away from home Use the surrounding landscape as an economic resource (regional and municipal agriculture, forestry, tourism, etc.) Seek new tasks for urban agriculture (direct marketing of regional food, energy production, maintenance of cultural landscape, events, etc.) > Plan in accordance with the climatic, topographical and geological setting Preserve important surfaces for the urban climate and avoid barriers in air exchange corridors (forests as cold air source areas, lakes as climatic balancing elements, valleys and mountain sides as air exchange corridors), avoid industry and highly polluting roads especially in climatic sensible areas, consider the main wind direction for the spatial expansion of settlement areas) Consider the local climate conditions for the design of public spaces (wind protection, roofs as rain protection, exposure to the sun, shadowing elements) and for building design (shape, materials, energy concept, etc.) Take the local topography into account for the transport systems (e.g. for walking and cycling pathways), for energy-efficiency (e.g. by avoiding settlements on shadowy north inclinations) and for water systems (e.g. rainwater management on the surface) Plan with the geological conditions (soil, groundwater, etc.) e.g. for urban greenery, rainwater management and constructing buildings BUILT ENVIRONMENT > Strive for a poly-centric, compact and transit-oriented structure of the city Strive for a poly-centric structure of the city with good accessibility of basic needs, of the city centre as culmination of (higher) infrastructures and of working places Organise the city as a network of mixed use urban quarters with individual characters and identities Strive for a compact city using all possibilities of internal development Concentrate urban development at sites with a high potential for public transport (Transit oriented Development) Promote connectivity in the local, metropolitan and global scale by the integration of new and existing developments in superior transport and communication networks Strive for a land management on regional and municipal scale Organise the price system to achieve changes in the transportation system (taxes, subsidies, fares, etc. differentiated by place and time) IUW 11

12 > Promote use, re-use and revitalisation of the cultural heritage Respect the cultural heritage of the region and the city regarding historical development of cities (e.g. phases of growth), mobility, geology, climate, topography, water structures and agricultural field structure Refer to the historical urban grain (street network hierarchy and design, texture of building lots, land-use patterns, open space elements) Strive for maintaining and re-using of existing elements such as buildings, open space elements and infrastructure (also contribution to a genius loci based on the continuity of the urban cultural heritage) Correspond to the consolidated regional and local building typologies regarding weather protection (sun, wind, rain, snow), regional culture for living, aesthetics based on local handcrafts, etc. ECOCITY Objectives Based on the objectives for sustainable and liveable settlement patterns (see "The vision of an ECOCITY") and the generally agreed principles for sustainable urban development (decentralised concentration, balanced mix of different land uses, compact, dense structure) a list of more detailed objectives for an ECOCITY was compiled. The four sectors of urban development (urban structure, transport, energy and material flows, and socio-economy) and their important aspects were used to structure the presentation of the objectives, focussing on the core themes urban structure and transport. The objectives are complemented by the subsequent specifications, which are relevant for their achievement. Objectives and Specifications for the Sectors of Urban Development URBAN STRUCTURE LAND-DEMAND > Increase re-use of land and built structures to reduce land and new building demand Give priority to the reuse of existing sites (brown field developments) Increase density of existing sites (e.g. in gaps between blocks or buildings) Minimise stock of vacant dwellings, buildings and plots by municipal management (e.g. register of available plots within the city, activities for inner city developments) > Develop structures of qualified high density in ecological, economic and social context Strive for high density to reduce land consumption and to contribute to soil conservation Plan for high building density to promote a high social and spatial-visual density Plan for high density as a precondition for economic public transport, community heating systems and provision of basic facilities Consider requirements for passive and active use of solar energy, good day-lighting conditions, sufficient open spaces, surfaces for water management, air exchange corridors..., which are limiting the density Concentrate structures with high density around stops of public transport Plan for compact and multi-storey typologies for residential housing and commercial uses Consider increasing of density by minimising land-demand for motorised traffic and parking IUW 12

13 LAND USES - MIXED USE > Organise a balance of residential, employment and educational uses as well as distribution, supply and recreational facilities Integrate a balanced ratio of residential housing, commercial uses, cultural facilities, sciences and education Integrate retail for basic daily necessities Offer social infrastructure (kindergarten, primary, secondary schools, general practitioner) Include on new sites facilities servicing the entire community as attractors Maintain and strengthen existing mix of uses Add other uses into existing mono-functional areas > Strive for fine-meshed mixed use structures at building, block or neighbourhood level Promote a small scale mix of uses Offer basic facilities (e.g. groceries, kindergarten, primary school, tavern) within walking distance to living and working environments Strive for variability and flexibility of urban and building structures to facilitate changes of use Offer differentiated areas with different meshes of mixed structures and different ratios of uses PUBLIC SPACE > Provide attractive and liveable public space for everyday life Allocate sufficient public spaces (squares, streets, green zones) close to living and working environments Maximise possibilities of interchange and create opportunities for communication and encounter by planning for communicative open spaces Strive for a multi-functionality (avoid mono-functionality) and a strong identity of public spaces Orientate buildings to the public space (windows, entrances, attractive ground floor facades supported by appropriate uses) Organise open space elements and architecture in a high aesthetic quality (water design, surfaces in streets and squares, facades, urban furniture, etc.) Consider the exposure of public spaces to bioclimatic conditions (wind, sun, rain, snow, etc.) permitting the use of public spaces all along the day and all along the year Minimise disturbance of public spaces by motor traffic especially regarding safety and noise conditions Create public spaces appropriate for sensual experience > Consider liveability, legibility and connectivity of public space patterns Integrate different fabric types and building typologies into the urban structures for vivid neighbourhoods Plan a interconnected system of public space with maximised pedestrian networking of public spaces, changing attractions along spatial sequences and avoiding of architectural barriers Create neighbourhood centres as places to meet people and for the strengthening of the neighbourhood identity Strive for a genius loci by creating an urban fabric of open spaces, building structures and landscape elements with a special and distinctive identity Diversify public spaces to various types with a hierarchical structure (squares, parks, streetscapes) Promote the multifunctional character of roads as liveable public spaces with mixed use of transport area wherever appropriate IUW 13

14 LANDSCAPE / GREEN > Integrate natural elements and cycles into the urban tissue Maximise landscaping area (ground, facades, roofs) Create and conserve habitats for various animals and plants Create and conserve habitat networks (use linear elements to connect open spaces, avoid barriers, create stepping-stone habitats, consider ecological bridges) Create, maintain or reconstruct green and water elements within the city (trees, hedges, grassland, urban furniture, watercourses, fountains, etc.) Maintain and conserve bioclimatic important green elements and areas Create and maintain green corridors connecting green zones in the city and connecting them with the surrounding landscape Minimise sealed surfaces (footprint of buildings, treatment of pavements, parking spaces, etc.) > Create landscape patterns for a high social usability Offer recreation areas as attractive green zones next to neighbourhoods within the city (also to avoid weekend recreation away from home) Strive for a social structuring of outdoor area seeking for a balance and hierarchy between public, semipublic, private spaces Offer spaces for children's personal experience and the conscious perception of the natural environment Integrate urban agriculture (city farms, gardening) and seek for new tasks of the urban agriculture URBAN COMFORT > Strive for a high outdoor comfort daily, seasonally and annually Maintain or improve the urban ventilation on the city level (maintain and create green open spaces and water surfaces as connected open space patterns, maintain and create cold air source areas and cold air corridors Develop the geometry of quarters and neighbourhoods according to requirements of urban ventilation (choose climatic favourable forms of building layouts and materials for green spaces, blocks and buildings) Improve the air quality by reducing emissions of traffic, of commercial uses and industry, of households, of energy plants and heating systems at the source Increase filtering and absorption capacity of urban land by planning or maintaining trees and other vegetation, constructing green roofs and by leaving wide areas with no paving Reduce the impact of mobile telecommunication, electricity, traffic installations (electrified railway systems) and other technical devices on men s health and well-being (avoiding of electric and electromagnetic radiation, keeping sufficient distances and using screening materials and constructions) Plan green roofs for an improvement of the microclimate Consider water surfaces (e.g. part of rainwater management systems) to improve the urban comfort and to contribute to natural ventilation on the block or building level > Minimise noise pollution Avoid noise emissions at the source by taking active measures reducing the noise emissions of traffic, of commercial uses, of leisure and sports activities Control the noise with passive measures (sufficient distances, noise protection walls/embankments, protection plantings, shields of buildings, layout of buildings and floors) Minimise impact of construction works on urban comfort IUW 14

15 BUILDINGS > Increase indoor comfort and conserving of resources throughout the life-cycle of buildings Maintain and re-use existing buildings by keeping uses or conversion for new uses Strive for low-energy or passive-house standard in terms of construction and HVAC (Heating, Ventilating and Air-Conditioning) equipment (building services) Use healthy building materials regarding all phases of from production, construction, use and demolition Maximise the durability, detachability and the ability for recycling of materials and constructions Plan for reverse-engineering of HVAC (Heating, Ventilating and Air-Conditioning) equipment (building services) Reduce maintenance needs of buildings Promote the refurbishment of existing buildings (especially regarding the energy demand and supply) > Plan for communicative, flexible and accessible buildings Facilitate change of uses and multiple-shift of uses like living and working, parking and commercial uses Strive for a close connection of buildings to the public space and active frontages (facades, allocation of uses and entrances) Strive for communicative buildings with innovative ideas for living Avoid architectural barriers to accessibility (situation of buildings causing a long way round, steps) Seek for new housing concepts for seniors and elderly people and housing concepts for different generations ( young and old projects) Facilitate transformation and adaptation of inner spaces by the user TRANSPORT SLOW MODES / PUBLIC TRANSPORT > Minimise distances between activities in time and space for reducing travel demand Strive for an appropriate combination of activities in space (mixed use) Develop a compact urban form with sufficient density (necessary for an economically viable public transport system) Create high quality open spaces and architecture (squares, parks, streetscapes) > Give priority for pedestrian- and cycle paths as the main network for the internal neighbourhood traffic Create a sufficiently dense and attractive grid for pedestrians and cyclists and avoid long detours (e.g. around large building blocks or main traffic arteries) Integrate all important destinations (shops, schools, major employment locations) within the neighbourhood and/or close to public transport stops and ensure good connections to external destinations Design public spaces and streetscapes along pathways with a high spatial quality and changing public events (for attractive walking/cycling and for social control) Eliminate danger and disturbances of motorised traffic Provide barrier-free accessibility to transport networks and buildings for everyone Provide infrastructure for pedestrians and cyclists (parking and storage facilities for bikes, benches/seats, weather protection, etc.) IUW 15

16 > Give priority to public transport as the most important part of sustainable transport Integrate direct public transport lines into to the urban structure Develop an integrated system of public transport (railway, light rail, bus) to improve the connections with the municipal and regional networks and provide bike & ride / kiss & ride facilities at stops and interchanges Optimise distances between public transport stops (for economic operation and high coverage of rider catchment) Create dense developments within walking distance around public transport stops (but do not sacrifice high spatial qualities) Allocate stops to uses and vice versa in such a way that a majority of important public facilities is near the stops > Provide Mobility Management measures to support modal shift to environmentally compatible modes Promote mobility centres with comprehensive support of the transportation demands (mobility help-desk, ride-share agency, car-sharing-garage, car hire system, bicycle hire agency, sale of public transport tickets) Facilitate public relations on transport issues and awareness-raising-campaigns Provide a mobility package for households (car sharing, public transport season pass etc.) Provide comprehensive and easily-accessible information on all travel options (internet platform on travel options, PT schedules including inter-modal options etc.) Provide real-time information to passengers on time tables (arrivals, departures and connections) INDIVIDUAL MOTORISED TRAVEL > Reduce volume and speed of individual motorised traffic Reduce speed of motorised traffic (traffic calming, regulations) Strive for a differentiated shape and hierarchy of the road network with parts that are not dominated by motor traffic (lane width, speed, etc.) and with minimum through traffic (i.e. tree-like structures starting from a main collector road) Promote the multifunctional character of roads as liveable public spaces with mixed use of the transportdedicated surfaces wherever appropriate Promote car-free areas which allow experiencing all the advantages of living and moving without a car Minimise land consumption for motorised traffic Promote efficient use of cars (i.e. car-sharing in order to cut back car-ownership, agency for ride-sharing) Restrict access to particular areas for motorised transport (e.g.. to city or neighbourhood centres) > Support the reduction of motorised traffic by parking management Reduce parking spaces, i.e. the required ratio of parking space per dwelling (for car-reduced areas and for car-free areas) Concentrate parking spaces in collective carparks and district parking garages in acceptable distance to dwellings and not directly at the front door or even inside the residential buildings (i.e. district parking lots in the same distribution as public transit stops) Minimise parking spaces in public areas to reduce the impact of private cars on the quality of public spaces Reduce land consumption for parking (reduction of parking spaces, multi-storey parking, mechanical systems) IUW 16

17 TRANSPORT OF GOODS > Facilitate a neighbourhood logistics and delivery concept to minimise need for individual load carrying by car Facilitate a neighbourhood logistic concept including a co-ordinated goods delivery (neighbourhood service centre, shopping boxes, etc.) Use information system technologies including e-commerce solutions management Locate facilities with which generate need for goods transportation preferentially at sites allowing short routes for city logistics Plan for use environmentally compatible modes or alternative fuels for goods delivery > Integrate waste concepts in neighbourhood transport infrastructure Ensure access for collection vehicles to waste collection facilities Integrate locations for interim storage facilities (containers, etc.) in urban and building structure with an attractive design > Plan for efficient construction logistics Promote the use of local materials to minimise construction traffic Organise necessary trips for construction in an effective way FLOWS ENERGY > Optimise energy efficiency of the urban structure Design compact settlements and compact buildings with a low ratio surface to volume Solarise the urban structure: Layout of buildings for passive heating/cooling and for natural day-lighting (orientate buildings to the sun, avoid shading by optimising the heights of buildings in relation to distances between them, use shading while maintaining good day-lighting conditions, design roofs to use solar applications efficiently) Strive for high density developments for the possible economic application of district heating systems or co-generation plants. > Minimise energy demand of buildings Reduce energy losses by striving for a high insulation standard and air-tightness in new and existing buildings (low energy houses, passive-houses) and by striving for a compact design of buildings (clearly defined volumes i.e. avoiding of oriels and dormer windows) Reduce the heat consumption by maximising passive solar energy gains (i.e. high ratio of windows and glass facades on south facades) Reduce energy demand for cooling by reducing solar irradiation into buildings and by reducing the electricity consumption (to avoid additional internal heat generation i.e. of computers, electric devices) Reduce hot water consumption by water saving installations Reduce electricity consumption by layouts of buildings favouring good day-lighting conditions (atriums, avoiding deep buildings, etc.) IUW 17