Available online at ScienceDirect. Physics Procedia 56 (2014 ) 1 6
|
|
- Augusta Megan Mills
- 6 years ago
- Views:
Transcription
1 Available online at ScienceDirect Physics Procedia 56 (2014 ) 1 6 M. Schmidt, F. Vollertsen, M. Merklein Laser Assisted Net Shape Engineering 8 International Conference on Photonic Technologies Volume 56 Proceedings of the LANE 2014 September 08-11, 2014 Fürth, Germany Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license ( Peer-review under responsibility of the Bayerisches Laserzentrum GmbH doi: /j.phpro
2 2 M. Schmidt et al. / Physics Procedia 56 ( 2014 ) 1 6 Laser Assisted Net Shape Engineering 8 International Conference on Photonic Technologies Proceedings of the 8 th LANE Fürth, September 08-11, 2014 Edited by M. Schmidt, F. Vollertsen, M. Merklein For CIRP, WGP and WLT Volume 56 Elsevier B.V. Amsterdam 2014
3 M. Schmidt et al. / Physics Procedia 56 ( 2014 ) Laser Assisted Net Shape Engineering 8 International Conference on Photonic Technologies Proceedings of the 8 th LANE Fürth, September 08-11, 2014 Edited by M. Schmidt, F. Vollertsen, M. Merklein For CIRP, WGP and WLT Amsterdam: Elsevier B.V., 2014 ISSN of Physics Procedia: This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically those of translation, reprinting, reuse of illustrations, broadcasting, reproduction by photocopying machine or similar means and storage in data banks. Under 54 of the German Copyright Law, where copies are made for other than private use, a fee is payable to Verwertungsgesellschaft Wort, Munich. Elsevier B.V., Radarweg 29, 1043 NX Amsterdam, The Netherlands Copyright by M. Schmidt, F. Vollertsen, M. Merklein, Fürth, Germany, 2014 The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement that such names are exempt from the relevance of protective laws and regulations and therefore free for general use. Layout: Bayerisches Laserzentrum GmbH Publication: Elsevier B.V., Radarweg 29, 1043 NX Amsterdam, The Netherlands
4 4 M. Schmidt et al. / Physics Procedia 56 ( 2014 ) 1 6 Preface Welcome to our 8 th LANE. To meet upcoming global challenges, modern research has to act in a tight cooperation between different disciplines. Therefore, LANE 2014 offers a platform for an international exchange of ideas, opinions, perspectives, results and solutions concerning Photonic Technologies. Traditionally the focus of LANE is on the latest developments in the field of laser material processing. But beside a view on the progress of established technologies, we want to look ahead and identify new processes for manufacturing. Therefore, LANE spotlights especially emerging technologies like precision processing by ultrashort laser pulses, process analysis with sophisticated simulation and sensing tools, additive manufacturing, and innovative system engineering like ultrafast beam deflection. As laser assisted processes become more and more important for the application, they are prominently focussed on in the closing plenary session of the conference. We hope that the proceedings of this year s LANE conference are again a reference book for practical information as well as a source of inspiration for future research and development. Fürth, September 2014 The Editors M. Schmidt F. Vollertsen M. Merklein
5 M. Schmidt et al. / Physics Procedia 56 ( 2014 ) International Scientific Committee C.B. Arnold, Princeton University, USA P. Aubry, Arts et Métiers ParisTech, France G. Dearden, University of Liverpool, United Kingdom D. Drummer, University of Erlangen-Nürnberg, Germany C. Emmelmann, Hamburg University of Technology, Germany R. Fabbro, Arts et Métiers ParisTech, France T. Frick, Technische Hochschule Nürnberg, Germany A. Gebhardt, FH Aachen University of Applied Sciences, Germany M. Geiger, Bayerisches Laserzentrum GmbH, Germany T. Graf, University of Stuttgart, Germany H. Huber, Munich University of Applied Sciences, Germany A.J. Huis in 't Veld, University of Twente, The Netherlands A. Kaplan, Luleå University of Technology, Sweden S. Katayama, Osaka University, Japan A. Leipertz, University of Erlangen-Nürnberg, Germany G. Levy, CDRsp, Switzerland W. Meiners, Fraunhofer ILT, Germany M. Merklein, University of Erlangen-Nürnberg, Germany I. Miyamoto, Osaka University, Japan B. Neuenschwander, Bern Univ. of Applied Sciences, Switzerland A. Ostendorf, Ruhr-Universität Bochum, Germany A. Otto, Vienna University of Technology, Austria L. Overmeyer, Laser Zentrum Hannover e.v., Germany D. Petring, Fraunhofer ILT, Germany A. Piqué, Naval Research Laboratory, USA J.M. Pou, University of Vigo, Spain G.-W. Römer, University of Twente, The Netherlands M. Schmidt, University of Erlangen-Nürnberg, Germany K. Sugioka, RIKEN Advanced Science Institute, Japan G. Turichin, St. Petersburg State Polytechnic University, Russia R. Vallée, Université Laval, Canada F. Vollertsen, BIAS GmbH, Germany W.L. Weingärtner, Universidade Federal de Santa Catarina, Brazil Y. Wu, Shanghai Jiao Tong University, China M.F. Zaeh, Technische Universität München, Germany
6 6 M. Schmidt et al. / Physics Procedia 56 ( 2014 ) 1 6 Conference Organization M. Schmidt, Universität Erlangen-Nürnberg, Germany S. Roth, Bayerisches Laserzentrum GmbH, Germany H.-J. Krauß, Bayerisches Laserzentrum GmbH, Germany P. Bechthold, Universität Erlangen-Nürnberg, Germany K. Meyerhöfer, Bayerisches Laserzentrum GmbH, Germany The 8 th international conference LANE 2014 is organized by the Bayerisches Laserzentrum GmbH (blz) in cooperation with the Institute of Photonic Technologies (LPT), Universität Erlangen-Nürnberg LANE 2014 is supported by the German Research Foundation (DFG) and sponsored by The International Academy for Production Engineering The Erlangen Graduate School in Advanced Optical Technologies German Academic Society for Production Engineering German Scientific Laser Society
Available online at ScienceDirect. Physics Procedia 67 (2015 )
Available online at www.sciencedirect.com ScienceDirect Physics Procedia 67 (2015 ) 111 115 25th International Cryogenic Engineering Conference and the International Cryogenic Materials Conference in 2014,
More informationScienceDirect. Development progress of critical equipment in the CSNS cryogenic hydrogen system
Available online at www.sciencedirect.com ScienceDirect Physics Procedia 67 (2015 ) 233 238 25th International Cryogenic Engineering Conference and the International Cryogenic Materials Conference in 2014,
More informationAvailable online at ScienceDirect. Energy Procedia 91 (2016 ) 35 41
Available online at www.sciencedirect.com ScienceDirect Energy Procedia 91 (216 ) 35 41 SHC 215, International Conference on Solar Heating and Cooling for Buildings and Industry Butane heat pipes for stagnation
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif
More informationThe Effect of Quantity of Salt on the Drying Characteristics of Fresh Noodles
Available online at www.sciencedirect.com ScienceDirect Agriculture and Agricultural Science Procedia 2 ( 2014 ) 207 211 ST26943, 2nd International Conference on Agricultural and Food Engineering, CAFEi2014
More informationTHE LEADING LIGHT SENSORS, TEST AND MEASUREMENT/ OPTICAL MEASUREMENT SYSTEMS JUNE 24 27, 2019, MESSE MÜNCHEN
Connecting Global Competence THE LEADING LIGHT SENSORS, TEST AND MEASUREMENT/ OPTICAL MEASUREMENT SYSTEMS JUNE 24 27, 2019, MESSE MÜNCHEN 24th World s Leading Trade Fair with Congress for Photonics Components,
More informationIMS Global Partnerships with Academia, Research Institutions & Industry*
IMS Global Partnerships with Academia, Research Institutions & Industry* *As of January 13, 2011 UNITED KINGDOM Cranfield University Univ. of Manchester CANADA University of Toronto Global Partnerships
More informationProcedia - Social and Behavioral Sciences 195 ( 2015 ) World Conference on Technology, Innovation and Entrepreneurship
Available online at www.sciencedirect.com ScienceDirect Procedia - Social and Behavioral Sciences 195 ( 2015 ) 1846 1850 World Conference on Technology, Innovation and Entrepreneurship Fire Detection Systems
More information3 RD GAS BEARING WORKSHOP
Program www.gas-bearing-workshop.com 3 RD GAS BEARING WORKSHOP March 25, 2019 COURTYARD HOTEL DÜSSELDORF LECTURES POSTERS TABLE TOPS ORGANIZING INSTITUTIONS Copyright Photo: Phúc Vuong 3 RD GAS BEARING
More informationA study of Transient Performance of A Cascade Heat Pump System
Available online at www.sciencedirect.com ScienceDirect Energy Procedia 79 (2015 ) 131 136 2015 International Conference on Alternative Energy in Developing Countries and Emerging Economies A study of
More informationISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed
INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique
More informationISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting
INTERNATIONAL STANDARD ISO 1806 Second edition 2002-12-01 Fishing nets Determination of mesh breaking force of netting Filets de pêche Détermination de la force de rupture de la maille de nappe de filet
More informationCLEANROOMS AND ASSOCIATED
STANDARD I.S. EN ISO 14698-1:2003 ICS 13.040.35 CLEANROOMS AND ASSOCIATED National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 CONTROLLED ENVIRONMENTS - BIOCONTAMINATION
More informationScienceDirect. Investigation of Priority Directions of Rail Baltica Extension from Warsaw
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 187 (2017 ) 40 45 10th International Scientific Conference Transbaltica 2017: Transportation Science and Technology Investigation
More informationAvailable online at ScienceDirect. Procedia Engineering 135 (2016 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 135 (2016 ) 439 444 Study of Grid Ceiling on Parametric Optimization Design of Automatic Sprinkler System Xiang-yu Qu a,*, Hai-yan
More information15 th International Conference on Automatic Fire Detection PROCEEDINGS. October 14-16, 2014 Universität Duisburg-Essen Duisburg, Germany
15 th International Conference on Automatic Fire Detection PROCEEDINGS October 14-16, 2014 Universität Duisburg-Essen Duisburg, Germany ii Proceedings Vol. 1 and Vol. 2 of the 15 th International Conference
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives
INTERNATIONAL STANDARD ISO 15908 First edition 2002-12-01 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives Adhésifs pour réseaux de tuyauteries
More informationAnnex 31: Country presentation DE. Trends in the supermarket sector Characteristic quantities. Presentation: First results. Rainer M.
Annex 31: Country presentation DE Trends in the supermarket sector Characteristic quantities Presentation: First results Rainer M. Jakobs, Breuberg 1 Contents Introduction Objectives Grocery Retailing
More informationISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods
INTERNATIONAL STANDARD ISO 7458 Second edition 2004-03-01 Glass containers Internal pressure resistance Test methods Récipients en verre Résistance à la pression interne Méthodes d'essai Reference number
More informationLABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code
IRISH STANDARD I.S. EN ISO 4788:2005 ICS 17.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie LABORATORY GLASSWARE - GRADUATED
More informationISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion
INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l
More informationPISTON-OPERATED VOLUMETRIC
IRISH STANDARD I.S. EN ISO 8655-7:2005 ICS 17.060 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF National Standards Authority of Ireland Glasnevin, Dublin
More informationThermodynamic analysis of air cycle refrigeration system for Chinese train air conditioning
Available online at www.sciencedirect.com Systems Engineering Procedia () 6 International Conference on Risk and Engineering Management (REM) Thermodynamic analysis of air cycle refrigeration system for
More informationHeinz Lux. Director, KNX
Heinz Lux Director, KNX 234 KNX Manufacturers in 30 countries The worldwide STANDARD for Home and Building Control KNX is the STANDARD CENELEC EN 50090 the only European Standard for Home and Building
More informationISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts
INTERNATIONAL STANDARD ISO 505 Second edition 1999-11-15 Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts Courroies transporteuses Méthode de détermination
More informationSimulation of Full-scale Smoke Control in Atrium
Available online at www.sciencedirect.com Procedia Engineering 11 (2011) 608 613 The 5 th Conference on Performance-based Fire and Fire Protection Engineering Simulation of Full-scale Smoke Control in
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationPLASTICS - DETERMINATION OF THE MELT
IRISH STANDARD I.S. EN ISO 1133:2005 ICS 83.080.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT Tel: +353 1
More informationISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General
INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Récipients en verre Bagues à crans pour bouchage sous vide Partie 1: Généralités Reference
More informationAvailable online at ScienceDirect. Procedia Engineering 84 (2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 84 (2014 ) 553 557 2014ISSST, 2014 International Symposium on Safety Science and Technology Research on fire endurance of tempered
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 15902:2005 Optics and optical instruments - Diffractive optics - Vocabulary Optics and optical instruments - Diffractive optics - Vocabulary EESTI STANDARDIKESKUS EESTI STANDARDI
More informationHEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code
IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800
More informationFoodstuffs - Determination of vitamin C by HPLC
Irish Standard I.S. EN 14130:2003 Foodstuffs - Determination of vitamin C by HPLC NSAI 2003 No copying without NSAI permission except as permitted by copyright law. This document was published under the
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13938-1 First edition 1999-08-01 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Textiles Propriétés
More informationAvailable online at ScienceDirect. Procedia Engineering 121 (2015 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 121 (2015 ) 1238 1244 9th International Symposium on Heating, Ventilation and Air Conditioning (ISHVAC) and the 3rd International
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties
INTERNATIONAL STANDARD ISO 9311-1 First edition 2005-08-15 Adhesives for thermoplastic piping systems Part 1: Determination of film properties Adhésifs pour réseaux de tuyauteries en matières thermoplastiques
More informationEurope AG. Czech s.r.o. Panasonic Electric Works Company Presentation 1
Europe AG Czech s.r.o. Company Presentation 1 Matsushita History 1918 Foundation of Matsushita Electric by Konosuke Matsushita 1933 Divisional concept (first of its kind in Japan) 1935 Matsushita Electric
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés
More informationSTEELS MICROGRAPHIC DETERMINATION THE APPARENT GRAIN SIZE (ISO 643:2003) IRISH STANDARD I.S. EN ISO 643:2003. Price Code
IRISH STANDARD I.S. EN ISO 643:2003 ICS 77.040.99 National Standards Authority of Ireland Dublin 9 Ireland STEELS MICROGRAPHIC DETERMINATION Tel: (01) 807 3800 Tel: (01) 807 3838 OF THE APPARENT GRAIN
More informationBasics, Methods and Case Studies
Geobotany Studies Basics, Methods and Case Studies Editor Franco Pedrotti University of Camerino Camerino Italy Editorial Board S. Bartha, Vacratot, Hungary F. Bioret, University of Brest, France E.O.
More informationThe Future of PMRs: Towards a European PMR Network
The Future of PMRs: Towards a European PMR Network 21 Costas KADIS 1, Costas A. THANOS 2 and Emilio LAGUNA 3 1 Frederick University, 7, Y. Frederickou str., Pallouriotissa, 1036 Nicosia, Cyprus 2 Department
More informationA Study into the Standardization of Using Fire Detectors in Rail Vehicles for China
Available online at www.sciencedirect.com Procedia Engineering 52 ( 2013 ) 240 244 A Study into the Standardization of Using Fire Detectors in Rail Vehicles for China LIU Xiao-lu *, WANG Wen-qing Shenyang
More informationCONFORMITY ASSESSMENT - SUPPLIER'S
STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY
More informationBUILD the clinic you ve always imagined.
BUILD the clinic you ve always imagined. With the Varian VitalBeam radiotherapy system, now you can affordably take your treatment capabilities further. Discover how you can build upon the technology itself
More informationINDOOR HUMAN THERMAL COMFORT OPTIMAL CONTROL WITH DESICCANT WHEEL COOLING SYSTEM
Available online at www.sciencedirect.com ScienceDirect Energy Procedia 61 (2014 ) 882 886 The 6 th International Conference on Applied Energy ICAE2014 INDOOR HUMAN THERMAL COMFORT OPTIMAL CONTROL WITH
More informationCONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS (IEC 60375:2003) IRISH STANDARD I.S. EN 60375:2003. Price Code
IRISH STANDARD I.S. EN 60375:2003 ICS National Standards Authority of Ireland Dublin 9 Ireland CONVENTIONS CONCERNING ELECTRIC AND Tel: (01) 807 3800 Tel: (01) 807 3838 MAGNETIC CIRCUITS (IEC 60375:2003)
More informationEN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)
ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités
More informationISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints
INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies
More informationSýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test
INTERNATIONAL STANDARD ISO 22476-3 First edition 2005-01-15 Geotechnical investigation and testing Field testing Part 3: Standard penetration test Reconnaissance et essais géotechniques Essais en place
More informationWATER QUALITY - CRITERIA FOR
STANDARD I.S. EN ISO 17994:2004 ICS 07.100.20 13.060.70 National Standards Authority of Ireland Dublin 9 Ireland WATER QUALITY - CRITERIA FOR Tel: (01) 807 3800 Fax: (01) 807 3838 ESTABLISHING EQUIVALENCE
More informationAir distribution systems. Air distribution systems for assembly rooms
Air distribution systems Air distribution systems for assembly rooms Air distribution systems for assembly rooms 1) Seat outlet M-DJ 20 db(a) Fixed desk outlet M-HP 26 db(a) Adjustable desk outlet M-LT
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation
INTERNATIONAL STANDARD ISO 22654 First edition 2002-06-15 Footwear Test methods for outsoles Tensile strength and elongation Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la
More informationResilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.
More informationPaper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
More informationPaints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)
Irish Standard Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) NSAI 2011 No copying without NSAI permission except as permitted
More informationKNX The worldwide STANDARD for home and building control. KNX Association International
KNX The worldwide STANDARD for home and building control KNX Association International KNX is the Standard CENELEC EN 50090 the only European Standard for Home and Building Electronic Systems (HBES) based
More informationISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular
INTERNATIONAL STANDARD ISO 9100-12 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 12: 89 regular Récipients en verre Bagues à crans pour bouchage sous vide Partie 12: 89 regular Reference
More informationBRITISH STANDARD AEROSPACE SERIES BS EN 3506:2001 Hot rolled sheets and plates in heat resisting alloys Thickness 2,0 mm a 100mm Dimensions The European Standard EN 3506:2001 has the status of a British
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing
INTERNATIONAL STANDARD ISO 22777 First edition 2004-12-15 Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing Chaussures Méthodes d'essai pour
More informationISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 17892-6 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Reconnaissance et
More informationPAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code
IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF
More informationCOMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :
IRISH STANDARD I.S. EN 13757-2:2005 ICS 33.200 35.100.10 35.100.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: Tel:
More informationPress Release. Short profile Beckhoff. Short profile February 2009 Page 1 of 6
Page 1 of 6 Short profile Beckhoff Beckhoff implements open automation systems based on PC Control technology. The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 9100-2:2005 Glass containers - Vacuum lug finishes - Part 2: 33 medium Glass containers - Vacuum lug finishes - Part 2: 33 medium EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine
INTERNATIONAL STANDARD ISO 19954 First edition 2003-10-01 Footwear Test methods for whole shoe Washability in a domestic washing machine Chaussures Méthodes d'essai s'appliquant à la chaussure entière
More informationPETROLEUM AND NATURAL GAS
IRISH STANDARD I.S. EN ISO 10432:2005 ICS 75.180.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - Tel: +353 1 807 3800
More informationISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests
INTERNATIONAL STANDARD ISO 7439 Second edition 2002-03-15 Copper-bearing intra-uterine contraceptive devices Requirements, tests Dispositifs intra-utérins contenant du cuivre Spécifications, essais Reference
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 20127:2005 Dentistry - Powered toothbrushes - General requirements and test methods Dentistry - Powered toothbrushes - General requirements and test methods EESTI STANDARDIKESKUS
More informationBIOLOGICAL EVALUATION OF MEDICAL
IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353
More informationBeckhoff short profile
Beckhoff short profile Beckhoff implements open automation systems based on PC Control technology The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and automation software
More informationGlass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)
Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except
More informationPRODUCT INFORMATION. SureSense THE SURE WAY TO DETECT ANY OBJECT. Photoelectric Sensors
PRODUCT INFORMATION SureSense THE SURE WAY TO DETECT ANY OBJECT Photoelectric Sensors SureSense PHOTOELECTRIC SENSORS A FAMILY BUILT TO SOLVE ALL YOUR SENSING NEEDS Solving a wide range of sensing applications
More informationISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences
INTERNATIONAL STANDARD ISO 11683 Second edition 1997-10-01 Corrected and reprinted 1998-09-01 Packaging Tactile warnings of danger Requirements Emballages Indications tactiles de danger Exigences A Reference
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés
More informationELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code
IRISH STANDARD I.S. EN 62382:2007 ICS 25.040.01 ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance
INTERNATIONAL STANDARD ISO 17707 First edition 2005-07-01 Footwear Test methods for outsoles Flex resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la flexion Reference
More informationISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies
INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en
More informationISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method
INTERNATIONAL STANDARD ISO 16032 First edition 2004-09-15 Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method Acoustique Mesurage du niveau de pression
More informationDECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -
More informationISO INTERNATIONAL STANDARD. Geosynthetics Determination of friction characteristics Part 2: Inclined plane test
INTERNATIONAL STANDARD ISO 12957-2 First edition 2005-02-15 Geosynthetics Determination of friction characteristics Part 2: Inclined plane test Géosynthétiques Détermination des caractéristiques de frottement
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60410 First edition 1973 Sampling plans and procedures for inspection by attributes This English-language version is derived from the original bilingual publication by leaving
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationKNX The worldwide STANDARD for home and building control. KNX Association International
KNX The worldwide STANDARD for home and building control KNX Association International KNX is the Standard CENELEC EN 50090 the only European Standard for Home and Building Electronic Systems (HBES) based
More informationAvailable online at ScienceDirect. Energy Procedia 70 (2015 ) Yanjun Dai*, Xian Li, Ruzhu Wang
Available online at www.sciencedirect.com ScienceDirect Energy Procedia 7 (215 ) 418 426 International Conference on Solar Heating and Cooling for Buildings and Industry, SHC 214 Theoretical analysis and
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 14688-1:2003 Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description Geotechnical investigation and testing
More informationAvailable online at ScienceDirect. Procedia Engineering 135 (2016 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 135 (2016 ) 170 174 Evacuation Strategy of Ultra-tall Towers among Stairs and Elevators Juan-juan Chen a,b, *, Xiao-gang Wang
More informationAvailable online at ScienceDirect. Procedia Economics and Finance 18 ( 2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Economics and Finance 18 ( 2014 ) 157 164 4th International Conference on Building Resilience, Building Resilience 2014, 8-10 September
More informationQualitative Studies in Quality of Life
Qualitative Studies in Quality of Life Social Indicators Research Series Volume 55 Series Editor: ALex C. MichaLos Faculty of Arts Office, Brandon University, Brandon, Manitoba, Canada Editors: ED DIENER
More informationISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests
TECHNICAL SPECIFICATION ISO/TS 17892-10 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests Reconnaissance et essais géotechniques Essais
More informationCLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005
IRISH STANDARD I.S. EN ISO 4630-1:2005 ICS 87.060.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: Tel:
More informationBiological evaluation of medical devices
BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 534:2005 Paper and board - Determination of thickness, density and specific volume Paper and board - Determination of thickness, density and specific volume EESTI STANDARDIKESKUS
More informationNATURAL GAS - CALCULATION OF
IRISH STANDARD I.S. EN ISO 12213-2:2005 ICS 75.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: Tel: +353 1 807 3800 Fax:
More informationJOB FAIR AT DSS. Gain visibility with hiring companies. Discuss career options with employers. Build your professional network
SPONSORED BY SPIE CAREER CENTER JOB FAIR AT DSS Discuss career options with employers Build your professional network Gain visibility with hiring companies Baltimore Convention Center Baltimore, Maryland,
More informationValves Materials for bodies, bonnets and covers
BRITISH STANDARD Valves Materials for bodies, bonnets and covers Part 3: Cast irons specified in European Standards The European Standard EN 1503-3:2000 has the status of a British Standard ICS 23.060.01;
More informationISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 11442:2006 Toote tehniline dokumentatsioon. Arvutil põhineva tehnilise informatsiooni töötlemine. Osa 1: Andmekaitsenõuded Technical product documentation - Document management
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for uppers and lining Water vapour permeability and absorption
INTERNATIONAL STANDARD ISO 17699 First edition 2003-10-15 Footwear Test methods for uppers and lining Water vapour permeability and absorption Chaussures Méthodes d'essai des tiges et des doublures Perméabilité
More informationSTT 3000 Series STT250 /150 Surge Protection Device Specifications
STT 3000 Series STT250 /150 Surge Protection Device Specifications Part Number: 46188660-501 EN2I-6061 June 2011 Introduction This device is designed to give the Smart Temperature Transmitter maximum protection
More information