ecolor Graze Powercore Linear LED surface light for wall washing and grazing

Transcription

1 Linear LED surface light for wall washing and grazing

2 Linear LED surface light for wall washing and grazing linear LED lighting fixtures are ideal for surface grazing and wall-washing applications that require high-quality solid red, green, blue, or amber light. Featuring Powercore technology, processes power directly from line voltage, eliminating the need for external power supplies. A space-efficient, low-profile extruded aluminum housing and flexible mounting options allow discreet placement within architectural niches of many different shapes and sizes. Tailor light output to specific applications is available in standard 1 ft and 4 ft exterior-rated housings, and standard 10º x 60º and 30º x 60º beam angles. High-performance illumination and beam quality Superior beam quality offers striation-free saturation as close as 6 in (152 mm) from fixture placement with no visible light scalloping between fixtures. Universal power input range ecolor Graze Powercore accepts line voltage input of 100, 120, , and 277 VAC. Support for installations requiring conduit to fixtures Conduit fixtures have flying leads and threaded openings for 1/2 in NPT conduit to support installations in North America where conduit is required. Dimming capability Patented DIMand technology offers smooth dimming capability with selected commercially available reverse-phase ELV-type dimmers. Wide range of custom configurations Additional fixture lengths and beam angles are available as custom configurations. See the Ordering Information specification sheet for complete details. Versatile installation options Constant torque locking hinges offer simple position control from various angles without special tools. 2 Product Guide

3 E For help estimating the light output and distribution of ecolor lighting fixtures, please contact Philips Color Kinetics Applications Engineering Services at support@colorkinetics.com. E To calculate the number of fixtures your specific installation can support, download the Configuration Calculator from Specifications Due to continuous improvements and innovations, specifications may change without notice. Item Specification 1 ft (305 mm) 4 ft (1.2 m) Output Beam Angle 10 x 16 / 30 x 60 Electrical Control Physical Certification and Safety Input Voltage Power Consumption Dimming Dimensions (Height x Width x Depth) 120 / / 277 VAC, 50 / 60 Hz 15 W maximum at full output, steady state 60 W maximum at full output, steady state Compatible with selected commercially available reverse-phase ELV-type dimmers* 2.7 x 12 x 2.8 in (69 x 305 x 71 mm) 2.7 x 48 x 2.8 in (69 x 1219 x 71 mm) Weight 2.7 lb (1.2 kg) 10.8 lb (4.9 kg) Housing Lens Fixture Connectors Mounting Temperature Ranges Humidity Fixture Run Lengths Certification Environment Extruded anodized aluminum Clear polycarbonate Integral male / female waterproof connectors Multi-positional, constant torque locking hinges F ( C) Operating F ( C) Startup F ( C) Storage 0 95%, non-condensing 110 VAC 120 VAC 220 VAC 240 VAC UL / cul, FCC (120 VAC only), CE, CCC Dry / Damp / Wet Location, IP66 Configuration: 1 ft (305 mm) fixtures installed end-to-end, 20 A circuit, standard 50 ft (15.2 m) Leader Cable * Refer to for specific details. These figures, provided as a guideline, are accurate for this configuration only. Changing the configuration can affect the fixture run lengths. 2.8 in (71 mm) 12 in (305 mm) / 48 in (1219 mm) 3.3 in (84 mm) 5.4 in (137 mm) / 41.4 in (1052 mm) 2.1 in (53 mm) 2.7 in (69 mm) 1.75 in (44 mm) 2.25 in (57 mm).88 in (22 mm) 1.94 in (49 mm) 1.38 in (35 mm).38 in (9.5 mm) 2.36 in (60 mm).28 in (7.2 mm) x4 Substrate 1.4 in (39 mm).38 in (9.5 mm).38 in (9.5 mm).88 in (22 mm) 2.36 in (60 mm) 1.38 in (35 mm).22 in (5.5 mm) x6 Fixture.813 in (21 mm) Product Guide 3

4 Fixtures and Accessories For standard fixtures, a complete system includes Leader Cables to connect the first fixture in a series to power or a junction box; optional Jumper Cables to add space between fixtures in a series; and 3-conductor copper wire to connect junction boxes to power if installing in parallel. For Conduit fixtures, a complete system includes 1/2 in NPT conduit, 3-conductor copper wire, and junction boxes as needed. You can control all fixtures with commercially available on / off switches and selected commercially available reverse-phase ELV-type dimmers. Build-to-Order Configurations In addition to the standard configurations listed here, build-toorder configurations are also available with non-standard options. See the Ordering Information sheet at for complete information. Component Available Non-Standard Options Color Royal Blue Length 2 ft, 3 ft Beam Angle 9 x 9, 15 x 30, 60 x 30, 90 x 60 Fixtures Fixture Length Red Green Blue Amber Item Number Philips 12NC Item Number Philips 12NC Item Number Philips 12NC Item Number Philips 12NC 10 x 60 Beam Angle 120 VAC VAC 277 VAC Conduit / 120 VAC Conduit / 277 VAC 120 VAC VAC 277 VAC Conduit / 120 VAC Conduit / 277 VAC 1 ft (305 mm) ft (1.2 m) ft (305 mm) ft (1.2 m) ft (305 mm) ft (1.2 m) ft (305 mm) ft (1.2 m) ft (305 mm) ft (1.2 m) x 60 Beam Angle 1 ft (305 mm) ft (1.2 m) ft (305 mm) ft (1.2 m) ft (305 mm) ft (1.2 m) ft (305 mm) ft (1.2 m) ft (305 mm) ft (1.2 m) Accessories Use Item Number when ordering in North America. Item Type Size Item Number Philips 12NC Leader Cable Jumper Cable UL / cul ft (15.2 m) CE End-to-End UL / cul 1 ft (305 mm) ft (1.5 m) End-to-End CE 1 ft (305 mm) ft (1.5 m) ft (305 mm) Glare Shield 2 ft (610 mm) ft (914 mm) ft (1.2 m) Additional Terminators Quantity Additional Hinges Quantity Use Item Number when ordering in North America. 4 Product Guide

5 Installation offers dimmable, high-quality solid color LED illumination for surface grazing and wall-washing applications, both indoors and outdoors. Patented Powercore technology integrates LED power and data management within the fixtures and eases installation by eliminating the need for external power supplies. E Refer to the ew / ecolor Graze Powercore Installation Instructions for specific warning and caution statements. Owner / User Responsibilities It is the responsibility of the contractor, installer, purchaser, owner, and user to install, maintain, and operate fixtures in such a manner as to comply with all applicable codes, state and local laws, ordinances, and regulations. Consult with the appropriate electrical inspector to ensure compliance. Installing in Damp or Wet Locations When installing in damp or wet locations, seal all fixtures and all junction boxes with electronics-grade RTV silicone sealant so that water or moisture cannot enter or accumulate in wiring compartments, cables, fixtures, or other electrical parts. Use suitable outdoor-rated junction boxes when installing in damp or wet locations. Additionally, use gaskets, clamps, and other parts required for installation to comply with all applicable local and national codes. Fixture run lengths 110 VAC 120 VAC 220 VAC 240 VAC assuming 1 ft (305 mm) fixtures installed end-to-end on a 20 A circuit, using a standard 50 ft (15.2 m) Leader Cable E For help calculating the number of fixtures your specific installation can support, download the Configuration Calculator from or consult Application Engineering Services at support@colorkinetics.com. Planning Your Installation Regardless of the size and complexity of your installation, the time you spend planning can help minimize installation and configuration issues later. Well-designed lighting brightens an area, highlights architectural features or products, and enhances the ways you perform tasks. Keep the following in mind as you plan your installation: Refer to the lighting design plan, architectural diagram, or other diagram that shows the physical layout of the installation to identify the locations of all switches, fixtures, and cables. fixtures can be installed in series or in parallel (wired to a common junction box).the maximum number of fixtures each circuit can support depends on specific configuration details such as fixture length, fixture spacing, circuit size, line voltage, and leader cable length. As an example, the table to the left lists the maximum number of fixtures in a single run at various voltages, assuming 1 ft (305 mm) fixtures installed end-to-end on a 20 A circuit, using a standard 50 ft (15.2 m) Leader Cable. Keep in mind that these figures, provided as a guideline, are accurate for the specified configuration only. Changing the configuration can affect the fixture run lengths. Conduit fixtures can be connected in a run using the fixtures 6 ft (1.2 m) 3-conductor flying leads and junction boxes. Ensure that all junction boxes are suitable for the environment and sealed if necessary, and that all wiring between junction boxes complies with local codes. For high-contrast surface grazing for example, to highlight unique textures or features place 10º x 60º fixtures within 4 in (102 mm) of a wall or other surface, with each fixture s light beam parallel with the wall or surface. For smooth, wall-washing light that reflects a glare-free ambient glow into the surrounding area, use 30º x 60º fixtures, and place them at a greater distance from the wall or surface, with each fixture projecting its light beam parallel or at an angle with the wall or surface. All fixtures offer a 60º horizontal beam angle. The 60º beam angle lets you add space between fixtures without visible light scalloping. Product Guide 5

6 Assemble Additional Parts and Tools Ensure that all additional parts and tools are available, including: The included mounting hinges and hardware 2 mm, 2.5 mm, and 4 mm hex key wrenches 1/4 in (5 mm) socket cap fasteners, anchors, or screws for surface mounting Conduit as needed 3-conductor copper wire, as needed. Standard 12 AWG (2.05 mm) stranded wire is recommended. Junction boxes, as needed, rated for your application. (Refer to the manufacturer s literature for additional items required for mounting or sealing.) Electronics-grade room temperature vulcanizing (RTV) silicone sealant, as needed E Clean the lens with water and mild detergent using a soft cleaning cloth, and wipe dry. Because they will scratch, soften, pit, haze, yellow, mar, or crack the lens, do not use paper towels, abrasive cleaning products, window cleaners, or cleaning solutions containing chemicals such as ammonia, sodium hydroxide, and isopropyl alcohol. Included in the box fixture (1) or (2) Mounting hinges (2) or (4) M5, 15 mm stainless steel hex bolts for hinge installation Installation Instructions Mount and Connect Fixtures Make sure the power is OFF before mounting and connecting ecolor Graze Powercore fixtures. Standard fixtures offer bulkhead connectors that accept the pre-configured Leader and Jumper Cables. Because they have a male connector on one end of the fixture and a female connector on the other end, fixtures are directional, and must all be oriented in the same direction. Use Conduit in installations where local electrical codes require you to run conduit to the fixtures. Conduit fixtures have threaded openings that accept 1/2 in NPT conduit. Because both ends are the same, Conduit fixtures can be oriented in either direction. Mount Fixtures 1. Using the included 4 mm hex hardware, attach two hinges to each fixture. There are three possible methods for attaching hinges to the fixtures, each method offering differing degrees of swing radius and space-efficiency. Select the method most suitable for your application in (100 mm) Swing radius 3.62 in (92 mm) Swing radius 1.16 in (29 mm) 1.16 in (29 mm) in (85 mm) Swing radius 2. If installing Conduit fixtures, or ecolor Graze Powercore fixtures in parallel, mount junction boxes in accordance with the lighting design plan. 6 Product Guide

7 Conduit fixtures require a junction box to make connections between each pair of fixtures in a series. Each end of the fixture has integrated 6 ft (1.8 m) flying leads on each end for junction box connections. 3. When installing a linear series of ecolor Powercore fixtures, make sure that all fixtures are oriented in the same direction. The Leader Cable connects to the male bulkhead connector on the first fixture in each series. fixtures Leader Cable 50 ft (15.2 m) To line voltage Terminator Jumper Cable 1 ft (305 m) or 5 ft (1.5 m) Jumper Cable End-to-End C Because both ends of the fixture are the same, Conduit fixtures can be oriented in either direction. Conduit fixtures To line voltage Minimum distance between fixtures Junction box for termination Junction box for connecting 6 ft (1.8 m) fixture flying leads Junction box for connecting 6 ft (1.8 m) fixture flying leads Fixture flying leads.125 in (3 mm) Minimum Using 1/4 in (5 mm) socket cap screws, bolts, or anchors, mount the fixtures with hinge assemblies directly to a wall or other mounting surface. Make sure the mounting surface is flat, suitable for the mounting hardware, and clear of debris and other obstructions. 4. Rotate the fixture hinge assemblies into the desired positions. For consistent position control, use the indicators on the side of each hinge knuckle for reference. Use a 2 mm hex key wrench to loosen the set screws, as needed. 5. To accommodate installation from various angles, each hinge has four set screws designed to lock the hinge position. All four, or only two, of the set screws may be used, depending on the mounting method and swing radius you select for the hinge. For example, if the hinge leaves are to be fully closed, the interior set screws may not be accessible. Do not lock the hinge position at this time; the hinges have a built-in constant torque feature that allows temporary positioning. For optimal light output performance, aim and lock the hinges after mounting fixtures. Product Guide 7

8 Make Cable Connections () 1. If installing fixtures in series, run a 50 ft (15.2 m) Leader Cable from a line voltage source to the first fixture in the series. Twist the connector ends to lock the Leader Cable into place. 2. If installing fixtures in parallel, run 3-conductor copper wire from a line voltage source to a common junction box. Run 50 ft (15.2 m) Leader Cables from the common junction box to the first fixture in each series. Twist the connector ends to lock the Leader Cables into place. Within the common junction box, use wire nuts to connect line, neutral, ground, and data wires. Tuck wire connections into the junction box. Secure all junction box covers. If installing in a damp or wet location, seal all junction boxes and points of entry with contractor-grade RTV silicone sealant. Use gaskets, clamps, and other parts and fittings required to comply with local outdoor wiring codes. 3. Connect all Jumper Cables between fixtures. Twist the connector ends to lock. 4. Attach the terminator to the last fixture in each series. Terminators are provided with the Leader Cables. Leader Cable Connector Dimensions UL / cul 14 AWG.07 in (1.85 mm) CE 12 AWG.08 in (2 mm).37 in (9.3 mm).45 in (11.4 mm) 1.88 in (48 mm) 1.88 in (48 mm).91 in (23 mm).91 in (23 mm) 8 Product Guide

9 Make Cable Connections ( Conduit) 1. If installing fixtures in series, run 1/2 in NPT conduit and 3-conductor copper wire from a line voltage source to the first fixture in the series. Use wire nuts to connect line, neutral, ground, and data wires to the fixture s flying leads. 2. If installing fixtures in parallel, run 1/2 in NPT conduit and 3-conductor copper wire from a line voltage source to a common junction box. Run the integrated 6 ft (1.2 m) 3-conductor flying leads and 1/2 in NPT conduit from the first fixture in each series to the common junction box. Within the common junction box, use wire nuts to connect line, neutral, ground, and data wires. Tuck wire connections into the junction box. 3. To make connections between Conduit fixtures in a series, run the integrated 6 ft (1.2 m) 3-conductor flying leads and 1/2 in NPT conduit from the output end of one fixture and input end of the next fixture in the series to a junction box. Within the junction boxes, use wire nuts to connect line, neutral, ground, and data wires. Tuck wire connections into the junction box. 4. Terminate the run by running 1/2 in NPT conduit and the flying leads from the output end of the last Conduit fixture in the series to a junction box. Within the junction box, use wire nuts to connect line, neutral, ground, and data wires. Tuck wire connections into the junction box. 5. Secure all junction box covers. If installing in a damp or wet location, seal all junction boxes and points of entry with contractor-grade RTV silicone sealant. Use gaskets, clamps, and other parts and fittings required to comply with local outdoor wiring codes. Product Guide 9

10 Make Power Connections Once you ve made all fixture and junction box connections, connect the flying leads from a Leader Cable, 3-conductor wire from a common junction box, or the cable from the input end of the first Conduit fixture in a series to the fixture cable to a line circuit by a method that meets all national, regional, and local regulations. E To ensure CE compliance when using a terminal block, the terminal block must conform to EN or EN and meet the specified ratings for the voltage listed in this Product Guide. G N L UL / cul G N L CE 50 ft ( 5.24 m) ( ) 50 ft ( 5.24 m) ( ) Aim and Lock the Fixtures Make sure the power is ON before aiming and locking fixtures. Rotate the fixtures to achieve the optimal angle for light output. For consistent position control, use the indicators on the side of each hinge knuckle as reference. Once satisfied with fixture angles and positioning, use a 2 mm hex key wrench to tighten the hinge position set screws and lock each hinge Product Guide

11 E Do not look directly into beam when aiming and locking. E The hinge position set screws have factory applied thread lock. Confirm the fixture angle and positioning before locking each hinge. Attach Glare Shields (Optional) Glare Shields, in 1 ft (305 mm), 2 ft (610 mm), 3 ft (914 mm), and 4 ft (1.2 m) lengths, can be inserted in the grooves in the housing. Glare Shields block unwanted spill light, and can shield the fixture s LEDs from being directly visible in certain mounting situations. 1. Insert the Glare Shield s triangular tab in the outer groove on the side of the housing. 2. Using a hex wrench, tighten the locking screws to hold the Glare Shield in place. 1.5 mm 3. (Optional) Attach a tether to the knockout in the Glare Shield and affix the tether to a secure anchor point. Product Guide 11

12 Philips Color Kinetics 3 Burlington Woods Drive Burlington, Massachusetts USA Tel Tel Fax Copyright 2011 Philips Solid-State Lighting Solutions, Inc. All rights reserved. Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, ColorBlast, ColorBlaze, ColorBurst, ew Fuse, ColorGraze, ColorPlay, ColorReach, iw Reach, ew Reach, DIMand, EssentialWhite, ew, icolor, icolor Cove, IntelliWhite, iw, iplayer, Optibin, and Powercore are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in the United States and / or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners. Due to continuous improvements and innovations, specifications may change without notice. DAS R