The term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013.
|
|
- Kenneth Roberts
- 6 years ago
- Views:
Transcription
1 ISO/TC 135 N 476 Non-destructive testing Our Date: Number of Pages:9 (Incl. this page.) To: Cc : ISO Central Secretariat P-members and O-members of ISO/TC 135 Chairmen and Secretaries of ISO/TC 135/SCs Organizations in Liaison with ISO/TC 135 Participants of Durban Meetings From: Secretary of ISO/TC 135 Subject: Chairpersonship of ISO/TC 135/SC 3 Dear Sir or Madam: The term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year The secretariat of ISO/TC 135/SC 3 has re-nominated him for a new mandate for 3 years starting from , which was ratified by the SC 3 members as attached. In accordance with Clause of the ISO/IEC Directives, this proposal is sent to the ISO/TC 135 members for approval. A draft resolution per correspondence is circulated via the ISO Committee Internal Balloting system. In order for the TC 135 to resolve this re-nomination, you are asked to vote at the ISO s electronic balloting portal, no later than Please note that the official balloting is for internal ballotters only. Experts and delegates have to submit their votes and comments to the relevant national member body. Best regards, Yuji Ogino Secretary ISO/TC 135 Encl: Attachment A: ISO/TC 135/SC 3 N 87 (Result of voting at SC 3) Attachment B: Professional background in relation to ultrasonic testing and its standardization Attachment C: Activities in ISO/TC 135/SC 3 since 2007 Secretariat address: Japanese Society for Non-Destructive Inspection (JSNDI) MBR99 bldg. 67 Kanda-sakumagashi, Chiyoda-ku, Tokyo , Japan Phone: FAX: iso@jsndi.or.jp 1
2 ISO/TC 135 N 476 Annex ISO/TC 135 Draft Resolution per Correspondence ISO/TC 135/SC 3 Chairperson s new mandate, 3 years ISO/TC considering the ISO/IEC Directives, Clause 1.8.1, which lays down the rules for successive nomination of Chairperson, - noting the re-nomination by the ISO/TC 135/SC 3 Secretariat, which was ratified by the SC 3 members, - re-appoints Mr.Udo Schlengermann as Chairperson of ISO/TC 135/SC 3 for a period of 3 years ( ). Secretariat address: Japanese Society for Non-Destructive Inspection (JSNDI) MBR99 bldg. 67 Kanda-sakumagashi, Chiyoda-ku, Tokyo , Japan Phone: FAX: iso@jsndi.or.jp 2
3 ISO/TC 135/SC 3 N 87 REPLACES: ISO/TC 135/SC 3 N 84 ISO/TC 135/SC 3 Ultrasonic testing Secretariat: DIN Chairmanship of ISO/TC 135/SC 3 "Ultrasonic testing" Date of document Expected action Info Background Dear members of ISO/TC 135/SC 3, According to the result of voting ISO/TC 135/SC 3 will nominate Mr Schlengermann as Chairman for a 3-year-period from the January 2014 to December Your sincerly DIN Deutsches Institut für Normung e. V. Materials Testing Standards Committee (NMP) Dipl.-Ing. (FH) Martin Sengebusch Project manager 3
4 Result of voting Ballot Information Ballot reference Re-appointment of Chairman ( ) Ballot type Ballot title CIB Opening date Closing date Note According to ISO/IEC Directives Part 1, clause Member responses: Votes cast (22) Comments submitted (0) Votes not cast (3) Argentina (IRAM) Brazil (ABNT) Bulgaria (BDS) Canada (SCC) China (SAC) Czech Republic (UNMZ) France (AFNOR) Germany (DIN) India (BIS) Indonesia (BSN) Iran, Islamic Republic of (ISIRI) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Malaysia (DSM) Netherlands (NEN) Poland (PKN) Romania (ASRO) South Africa (SABS) Sweden (SIS) Ukraine (DTR) United Kingdom (BSI) Austria (ASI) Kazakhstan (KAZMEMST) Russian Federation (GOST R) Questions: Q.1 "Do you agree with the re-appointment of Mr. Udo Schlengermann as ISO/TC 135/SC 3 Chairman for a 3-year-period (January 2014 to December 2016)?" Votes by members Q.1 Argentina (IRAM) 4
5 Brazil (ABNT) Bulgaria (BDS) Canada (SCC) China (SAC) Czech Republic (UNMZ) France (AFNOR) Germany (DIN) India (BIS) Indonesia (BSN) Iran, Islamic Republic of (ISIRI) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Malaysia (DSM) Netherlands (NEN) Poland (PKN) Romania (ASRO) South Africa (SABS) Sweden (SIS) Ukraine (DTR) United Kingdom (BSI) I abstain. I abstain. Answers to Q.1: "Do you agree with the re-appointment of Mr. Udo Schlengermann as ISO/TC 135/SC 3 Chairman for a 3-year-period (January 2014 to December 2016)?" 20 x Argentina (IRAM) Brazil (ABNT) Bulgaria (BDS) Canada (SCC) Czech Republic (UNMZ) France (AFNOR) Germany (DIN) India (BIS) Iran, Islamic Republic of (ISIRI) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Malaysia (DSM) Netherlands (NEN) Poland (PKN) Romania (ASRO) South Africa (SABS) Sweden (SIS) Ukraine (DTR) 5
6 United Kingdom (BSI) 0 x No, I do not agree. 2 x I abstain. China (SAC) Indonesia (BSN) Comments from Voters Member: Comment: Date: Comments from Commenters Member: Comment: Date: 6
7 Professional background in relation to ultrasonic testing and its standardisation, Udo Schlengermann Engaged as a researcher (physicist) on ultrasonic applications and on interaction of ultrasound with all kind of materials and discontinuities by the companies Krautkramer, Agfa NDT and General Electric Inspection Technologies, Huerth, Germany for more than 40 years. Special fields are UT on rolled, forged and cast metal products, UT of joints and UT of railway equipment, rolling stock and permanent way. Chairman of German standards committee for ultrasonic testing since 1993 (DIN NA AA); Convener of European standards committee for ultrasonic testing since 2004 (CEN/TC 138/WG 2), Liaison officer to the European Committee for Iron and Steel Standardization (ECISS); Convener of European standards committee for ultrasonic testing of welds since 2005 (CEN/TC 121/SC 5/WG 2); Convener of International standards committee for ultrasonic testing of welds since 2012 (ISO/TC 44/SC 5/WG 2); Chairman of International standards committee for ultrasonic testing since 2007 (ISO/TC 135/SC 3). Member of the German Society for Non-destructive Testing (DGZfP), including membership in its technical committees and sub-committees for UT and for railway maintenance; Member of the German Society for Materials (DGM); Member of the German Welding Society (DVS). 7
8 Attachment C to ISO/TC 135 N 476 Activities in ISO/TC 135/SC3 since 2007 Secretariat DIN Germany Chairman Mr Udo Schlengermann; Secretary Ms Michaela Treige, DIN until 2008; Mr Lars Gallasch, DIN, from 2008 until 2011; Mr Martin Sengebusch, DIN since Meetings of ISO/TC135/SC3 October 2007, Buenos Aires, Argentina; June 2010, Moscow, Russia; April 2013, Durban, South Africa. Treated Standards ISO/FDIS 2400 Non-destructive testing - Ultrasonic examination -Specification for calibration block No. 1 ISO 5577:2000 Non-destructive testing - Ultrasonic inspection Vocabulary ISO 7963:2006 Non-destructive testing - Ultrasonic testing -Specification for calibration block No. 2 ISO 10375:1997 Non-destructive testing - Ultrasonic inspection -Characterization of search unit and sound field ISO 12710:2002 Non-destructive testing- Ultrasonic inspection -Evaluating electronic characteristics of ultrasonic test instruments ISO 12715:1999 Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles ISO Non-destructive testing - Ultrasonic thickness measurement ISO 16810:2012 Non-destructive testing - Ultrasonic testing -General principles ISO 16811:2012 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting ISO 16823:2012 Non-destructive testing - Ultrasonic testing Transmission technique ISO 16826:2012 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface 8
9 ISO 16827:2012 Non-destructive testing - Ultrasonic testing -Characterization and sizing of discontinuities ISO 16828:2012 Non-destructive testing - Ultrasonic testing -Time-of-flight diffraction technique as a method for detection and sizing of discontinuities ISO/TR Non-destructive testing - Automated ultrasonic testing - Selection and application of systems ISO 16831:2012 Non-destructive testing - Ultrasonic testing -Characterization and verification of ultrasonic thickness measuring equipment ISO Non-destructive testing - Ultrasonic testing -Specification for step wedge calibration block ISO Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion ISO 18175:2004 Non-destructive testing - Evaluating performance characteristics of ultrasonic pulseecho testing systems without the use of electronic measurement instruments ISO :2012 Non-destructive testing - Characterization and verification of ultrasonic phased array systems - Part 1: Instruments ISO :2013 Non-destructive testing - Characterization and verification of ultrasonic phased array systems - Part 3: Complete systems 9
Latest Developments in Condition Monitoring Standards
Latest Developments in Condition Monitoring Standards Presented by: Simon Mills Chair of BSI GME21/7 Condition monitoring of machines Past Chair ISO TC108/SC5 Condition monitoring of machine systems Member
More informationISO/TC 30 Standards. Dr Michael Reader-Harris, NEL and Dr David Michael International Secretariats, BSI
Dr Michael Reader-Harris, NEL and Dr David Michael International Secretariats, BSI Slide 1 Benefits of standards Contributed to about 13 per cent of the growth in labour productivity in the UK over 1948-2002,
More informationISO/TC 215 N RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2. Date of document: Expected action: Background:
ISO/TC 215 N 2473 ISO/TC 215 Health informatics Email of secretary: Diana.warner@ahima.org Secretariat: ANSI (United States) RESOLUTIONS ISO TC215 Liverpool 10 Nov 2017 v2 Document type: Resolution Date
More informationInternational standards used locally worldwide ISO/TC 67
/ International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie
More informationISO/TC 249: past, present and future
ISO/TC 249: past, present and future Mr David Graham Chair of ISO/TC 249 6 December 2012 THE PAST History of ISO/TC 249 ISO/TC proposed by SAC at 45 th TMB, June 2009 Preliminary meeting August 2009, Beijing
More informationTransformasjonen fra en analog til en digital byggeindustri har startet
Øivind Rooth Chair CEN/TC 442 Building Information Modelling 08.11.2017 Transformasjonen fra en analog til en digital byggeindustri har startet BARE DE SOM ER I FRONT VIL HA EN FREMTID, OM KORT TID KAN
More informationContact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status:
Date 2007-11-26 Supersedes document Reference number ISO/TC 224 N 360 This document is still under study and subject to change. It should not be used for reference purposes. ISO/TC 224 Title: Service activities
More informationISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Tällberg, Sweden
ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Tällberg, Sweden By jouko.vaskimo@aalto.fi ISO/TC 258, the Technical Committee (TC) of the International
More informationCEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
More informationSTANDARDISATION OF SRF (ISO/TC 300)
STANDARDISATION OF SRF (ISO/TC 300) Mikko Talola Chairman of CEN/TC 343 & ISO/TC 300 Workshop Production and utilisation options for Solid Recovered Fuels EUBCE 2018 Copenhagen, Denmark May 17, 2018 SRF
More informationThe Addressing project by the International Organization for Standardization (ISO) by Serena Coetzee at Addressing the Future,
UPUAddressing Conference including S42 Recognition Ceremony Berne, Switzerland, 9 November 2010 presented by Antony Cooper acooper@csir.co.za Convenor: Working Group 7, Information Communities,, ISO/TC211
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More informationCEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved
CEN/TC 256 Overview Presentation to ISCC January 2017 C Cork Chair CEN/TC 256 Overview of presentation CEN/TC 256 Organisation Developments in 2016 Key outputs Activities for 2017 2 CEN/TC 256 Committee
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system Resistance welding - Welding current measurement for resistance
More informationCEN/TC 186 ISO/TC 244
SAFETY & STANDARDS Industrial Thermoprocessing Equipment (IThE) CEN/TC 186 ISO/TC 244 IEC/TC 27 Standardisation for IThE in Europe Basis of European Standardization on Machinery and Thermoprocessing Equipment
More informationInternational Standards Health Informatics. Audrey Dickerson, RN, MS ISO/TC 215 Secretary
International Standards Health Informatics Audrey Dickerson, RN, MS ISO/TC 215 Secretary Objectives To appreciate the global role of standards in our lives To understand the role of international HIT standards
More informationYoshikazu Tanabe On behalf of Mr.Shigeo AIBA
ESF-International Spring Makers Conference Report of ISO/TC 227 April 6 th 2016 Yoshikazu Tanabe On behalf of Mr.Shigeo AIBA President of Toyoshima Co.,Ltd Chairman of Mirror committee (JSMA) 1 / 10 Contents
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment Non-destructive testing - Ultrasonic testing
More informationDoc. Number: N Report of CEN/TC 267 Secretariat "Industrial piping and pipelines" for the 30 th Plenary Meeting 27 October 2016 (Paris)
«Industrial piping and pipelines» CEN/TC 67 Date: 016-09-7 Assistant: Patricia DUFOUR Direct line: + (0)1 7 17 67 8 p.dufour@unm.fr Doc. Number: N 1069 Your contact: Patrick AMESLON Direct line: + (0)1
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10306:2002 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams EESTI
More informationStandardisation activities in the field of HMI for road vehicles
International Telecommunication Union Standardisation activities in the field of HMI for road vehicles Dr. Christhard Gelau Bundesanstalt für Straßenwesen/Federal Highway Research Institute (BASt) Department
More informationISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed
INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines
More informationPaper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
More informationISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Athens, Greece
ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Athens, Greece By jouko.vaskimo@aalto.fi ISO/TC 258, the Technical Committee (TC) of the International Organization
More informationCEN System Delegated Decisions Dispatch 33:2016
2016-08-16 Page 1 CEN System Delegated Decisions Dispatch 33:2016 1 CEN/TC 127 Correspondence... 1 2 CEN/TC 147 Correspondence... 9 3 CEN/TC 160 Correspondence... 10 4 CEN/TC 182 Correspondence... 12 5
More informationRubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
BRITISH STANDARD BS EN ISO 1307:2008 Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses ICS 23.040.70 National foreword This British Standard
More informationFounding - Magnetic particle testing
Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif
More informationISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints
INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies
More informationMetallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
Irish Standard I.S. EN ISO 376:2011 Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) NSAI 2011 No copying without NSAI
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 16148:2006 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection Gas cylinders - Refillable seamless steel gas cylinders
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values Metallic materials - Vickers hardness test - Part 4: Tables and hardness values EESTI
More informationIntermediate report of the Secretariat on activities of CEN/TC 305 "Potentially explosive atmospheres Explosion prevention and protection"
2012-01-27 305 N 926 "Potentially explosive atmospheres Explosion prevention and protection" Intermediate report of the Secretariat on activities of 305 "Potentially explosive atmospheres Explosion prevention
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique
More informationGlass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)
Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except
More informationStatus report to ISO/TC204 October 2012
[CEN/TC278/WG1 N1658] CEN/TC278/WG1 & ISO/TC204/WG5 Status report to ISO/TC204 October 2012 Jesper Engdahl Jesper Engdahl, WG Convenor Rapp Trans AG Hochstrasse 100 CH-4018 Basel, Switzerland Phone: +41
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15693 April 2007 AGREEMENT ICS 27.010 English version Saving lifetimes of Energy Efficiency Improvement Measures in bottom-up calculations This CEN Workshop Agreement has been drafted
More informationEur Ing Keith J Hawken Technical and Standards Director ISO/TC 23/SC 7 Chairman
Eur Ing Keith J Hawken Technical and Standards Director ISO/TC 23/SC 7 Chairman AEA (Agricultural Engineers Association) (Established 1875) Trade Association (member companies) Economic, Export, Legal,
More informationEN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)
ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités
More informationILNAS-EN ISO 2692:2006
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische
More informationDocuments for Prague Meetings
ISO/TC 135 N 492 Non-destructive testing 2014-09-26 Documents for Prague Meetings ISO/TC 135 Prague Meetings Monday 6th - Saturday 11th, October 2014 Contents page N485 Full Info-----------------------------------------------------------------
More informationISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des
More informationIrish Standard I.S. EN :2011
Irish Standard Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) NSAI 2011 No copying
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 2884-1:2006 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear Paints and varnishes
More informationBIOLOGICAL EVALUATION OF MEDICAL
IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353
More informationSýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015
ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun
More informationCamping tents (ISO 5912:2011)
Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based
More informationPETROLEUM AND NATURAL GAS
IRISH STANDARD I.S. EN ISO 10432:2005 ICS 75.180.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - Tel: +353 1 807 3800
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationResilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.
More informationPetroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012)
Irish Standard I.S. EN ISO 12212:2012 Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012) NSAI 2012 No copying without NSAI permission except as permitted
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12680-3:2011 Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 12680-3:2011 sisaldab
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16411 December 2014 ICS 97.190 Supersedes CEN/TR 16411:2014 English Version Child use and care articles - 2014 compiled interpretations of
More informationInternational 3691 lap, 4
This is a preview of "ISO 3691:1980". Click here to purchase the full 0 version from the ANSI store. International Standard @) 3691 lap, 4 INTERNATIONAL ORGANIZATION FOR STANDARDlZATlON*ME~YHAPO~HAR OP~AHM3AUtlR
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15627 December 2007 AGREEMENT ICS 77.040.10 Supersedes CWA 15627:2006 English version Small Punch Test Method for Metallic Materials This CEN Workshop Agreement has been drafted and approved
More informationEuropean Standardization for the Natural Gas Infrastructure
European Standardization for the Natural Gas Infrastructure The benefits of participation Arie Krijgsman Gasunie The Netherlands Madrid - 18th and 19th June 2009 Content The standards framework Benefits
More informationISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts
INTERNATIONAL STANDARD ISO 505 Second edition 1999-11-15 Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts Courroies transporteuses Méthode de détermination
More informationSpring-type straight pins Coiled, light duty
BRITISH STANDARD BS EN ISO 8751:2007 Spring-type straight pins Coiled, light duty The European Standard EN ISO 8751:2007 has the status of a British Standard ICS 21.060.50 BS EN ISO 8751:2007 National
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14420-4:2005+A1:2007 Hose fittings with clamp units - Part 4: Flange connections Hose fittings with clamp units - Part 4: Flange connections EESTI STANDARDIKESKUS EESTI STANDARDI
More informationSýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment
ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications
More informationBUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
More informationNational foreword. Text affected
PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 534:2005 Paper and board - Determination of thickness, density and specific volume Paper and board - Determination of thickness, density and specific volume EESTI STANDARDIKESKUS
More informationISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General
INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Récipients en verre Bagues à crans pour bouchage sous vide Partie 1: Généralités Reference
More informationISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods
INTERNATIONAL STANDARD ISO 7458 Second edition 2004-03-01 Glass containers Internal pressure resistance Test methods Récipients en verre Résistance à la pression interne Méthodes d'essai Reference number
More informationISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion
INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l
More informationPersonal protective equipment - Safety footwear (ISO 20345:2011)
Irish Standard Personal protective equipment - Safety footwear (ISO 20345:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification
More informationFINAL DRAFT FprEN
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM FINAL DRAFT FprEN 16510-2-2 January 2016 ICS 97.100.30 Will supersede EN 13229:2001 English Version Residential solid fuel burning s - Part 2-2: Inset
More informationISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular
INTERNATIONAL STANDARD ISO 9100-12 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 12: 89 regular Récipients en verre Bagues à crans pour bouchage sous vide Partie 12: 89 regular Reference
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 10863:2011 Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011) EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationNon-destructive testing of welds Magnetic particle testing of welds Acceptance levels (ISO 23278:2006)
BRITISH STANDARD BS EN ISO 23278:2009 Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels (ISO 23278:2006) ICS 25.160.40 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED
More informationCEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442
CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin
More informationPaints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)
Irish Standard Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) NSAI 2011 No copying without NSAI permission except as permitted
More informationPlastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010)
Irish Standard I.S. EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) NSAI 2011 No copying without
More informationSýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -
More informationISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method
INTERNATIONAL STANDARD ISO 16032 First edition 2004-09-15 Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method Acoustique Mesurage du niveau de pression
More informationPAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code
IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF
More informationEXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES IRISH STANDARD I.S. EN 14199:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann 93.
IRISH STANDARD I.S. EN 14199:2005 ICS 93.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie EXECUTION OF SPECIAL GEOTECHNICAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 15749-4:2004 Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes Ships and marine technology - Drainage
More informationSýnishorn Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals
ÍSLENSKIR STAÐLAR CEN/TS 16244:2018 Gildistaka 15.5.2018 ICS: 91.04 Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 10664:2005 Hexalobular internal driving feature for bolts and screws Hexalobular internal driving feature for bolts and screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationPersonal protective equipment - Test methods for footwear (ISO 20344:2011)
Irish Standard Personal protective equipment - Test methods for footwear (ISO 20344:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 12693:2008 ICS 23.140 27.080 National Standards Authority of Ireland Northwood, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique
More informationSVENSK STANDARD SS-EN ISO :2007. Motståndssvetsning Mätning av svetsström Del 4: Kalibreringssystem (ISO :2005)
SVENSK STANDARD SS-EN ISO 17657-4:2007 Fastställd 2007-06-28 Utgåva 1 Motståndssvetsning Mätning av svetsström Del 4: Kalibreringssystem (ISO 17657-4:2005) Resistance welding Welding current measurement
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15994 July 2009 AGREEMENT ICS 35.240.60 English version e-tendering Process This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives of interested parties,
More informationCEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action
CEN/TC 151 N 800 CEN/TC 151 Construction equipment and building material machines - Safety E-mail of Secretary: rene.kampmeier_vdma.org@livelink.din.de Secretariat: DIN N 800 CEN TC 396 Activity report
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationÍST EN :2015. Gildistaka ICS: 53.06
ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform
More informationSýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test
INTERNATIONAL STANDARD ISO 22476-3 First edition 2005-01-15 Geotechnical investigation and testing Field testing Part 3: Standard penetration test Reconnaissance et essais géotechniques Essais en place
More informationNon-destructive testing of welds Penetrant testing of welds Acceptance levels (ISO 23277:2006)
BRITISH STANDARD BS EN ISO 23277:2009 Non-destructive testing of welds Penetrant testing of welds Acceptance levels (ISO 23277:2006) ICS 25.160.40 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement Non-destructive testing - Ultrasonic thickness measurement EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 11979-7:2006 Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
TECHNICAL REPORT CLC/TR 62125 RAPPORT TECHNIQUE TECHNISCHER BERICHT April 2008 ICS 13.020.01; 29.060.20 English version Environmental statement specific to TC 20 - Electric cables (IEC/TR 62125:2007) Déclaration
More information