KTZ data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet

Transcription

1 KTZ data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str Düsseldorf Germany Tel.: Fax:

2 Data Sheet KTZ Total Head m Efficiency % Output kw C.W.L. C.W.L. = Continuous running water level Classification Electric submersible pump Protection class IP68 Depth of submersion max. 50m Open type impeller Max. solid handling 8,5mm Suitable for spring water, rain water, ground water, sand carrying water Electric Motor Dry-type submersible induction motor, Insulation class F, 2 poles, 2850 r.p.m. Direct on line start Voltage: 400V, 50Hz, 3-phase Power input: 3,kW Power output: 2,2kW Nominal current: 4,9A Start current: 34,0A Electric Cable 20m H07RN-F 4Cx,5mm 2 Motor Protection Circle thermal protector (snap-action bi-metal device) Shaft Seal Double mechanical seal in oil bath additional lubrication by oil lifting device Primary Seal: silicon carbide on silicon carbide Secondary Seal: silicon carbide on silicon carbide Bearings Shielded ball bearings, maintenance-free Materials Impeller: Casing: Suction Cover: Motor frame: Shaft: Chromium iron casting FC200 (EN-GJL-200) FCD500 (EN-GJS-500-7) FC50 (EN-GJL-50) SUS420J2 (EN-X30Cr3) Discharge Connection 2 (50mm) BS-Coupling (threaded flange) Weight 34 kg (dry weight of the pump without cable) Heltorfer Str Düsseldorf Germany Tel.: Fax:

3 Heltorfer Str Düsseldorf Germany Tel.: Fax: KTZ Control No. KTZ ITEM CODE No. DESCRIPTION Q'TY SIZE MATERIAL WEIGHT kg REMARKS Hex.Bolt 2 M0x20 SUS Handle KTZ2.5/32.2( w/shackle) SPC+NBR Cable Clip Rubber HS2 NBR Cable Clip SB SPC Hex.Bolt M5x5 SWRM Hex.Nut M5 SWRM Hex.Bolt (w/plain Washer) 2 M5x5 SUS Gland LB Cabtyre Cable Set 20m H07RN4Cx,5mm²(CEE) LBT(HAR) Hex.Bolt 4 M0x30 SUS Plain Washer 4 M0 SPC Hose Coupling 50mm(5H) ADC BS-Coupling (outside thread) FC Packing KT-5 NBR 0.02 * Hex.Bolt (w/spring Washer) 4 M8x30 SUS Motor Bracket FC 4, O-Ring G-45 NBR 0.00 * Motor Protector V-50HZ KA33-GQXL04 (T.C) Pan Screw (w/spring Washer/Plain Was 2 M4x2 SWRM Earth Terminal Set.25mmx40L Pan Screw (w/spring Washer) M4x6 BSBM Wave Washer #6204 SK Bearing 6204ZZC O-Ring 47xd3. NBR * Slinger d20xd27x2t SPC Lead Wire Protection Plate d6xd36x2t Resin Rotor Set 3, Impeller Key 5x5x20l SUS Stator V-50HZ V-60HZ Set Bearing 6305ZZC Packing (Water Way, Upp.) KTZ2.5/32.2 NBR 0.00 * Motor Frame FC 9, Hex.Bolt (w/spring Washer) 4 M8x30 SUS Packing d0.3xd6x2t PE 0.00 * Oil Plug M0x6L SUS Oil Plug (old version) M0x20(B=3) SUS old Version Mechanical Seal H-20T SiC+CCBN 0.09 OIL ISO VG32 740ml Pan Screw 2 M5x6 SWRM Oil Lifter H-20(A)(T) Resin Pan Screw 4 M5x6 SWRM Seal Stopper H-20T SPCC O-Ring G-40 NBR 0.00 * Packing (Water Way, Low.) KTZ2.5/22.2 NBR * Pump Casing KTZ2.5/32.2 FC 5, Pump Casing (old version) KTZ2.5/32.2 FC 5,00 old Version Oil Seal TC NBR Oil Seal (old version) TC NBR old Version Shaft Sleeve d20xd25x6l SUS Impeller Shim d8.2xd29x0.3t SUS K94-8 Impeller (50Hz) KTZ HiCrFC, Impeller (60Hz) KTZ HiCrFC 0, Impeller Thread Protect.Cover No.3A(3.5) SUS Spring Washer M2 SUS Hex.Cap Nut M2 SUS Packing (S.Cover) d50xd86x0.3t PE Suction Cover KTZ2.5/22.2 FCD 2, Suction Cover (old version) KTZ2.5/22.2 FCD 2,00 old Version Plain Washer 3 M8 SPC Stud Bolt 3 M8x85(2/30) SUS Strainer Stand KTZ2.5/32.2 SPCC Plain Washer 3 M8 SPC Hex.Nut 3 M8 SWRM 0.00 <Packing O-Ring Set> Packing O-Ring Set Set (*) page of

4 Exploded View KTZ Heltorfer Str Düsseldorf Germany Tel.: Fax:

5 Dimensional Drawing KTZ C.W.L. CWL: Continuous Running Water Level Heltorfer Str Düsseldorf Germany Tel.: Fax:

6 Sectional Drawing KTZ No A 52B Description Cabtyre Cable Pump Casing Impeller Suction Cover Strainer Stand Mechanical Seal Oil Seal Oil Lifter Hose Coupling Oil Plug Lubricant Motor Bracket Upper Bearing Lower Bearing Qty. Remarks H07RN-F FC200 (EN-GJL-200) Chromium Iron Casting HiCrFC FCD500 (EN-GJS-500-7) Steel Plate SPCC H-20T DD25388 Plastic Aluminium Alloy Casting ADC2 SUS304 (EN-X5CrNi8-0) Turbine Oil (ISO VG32) FC50 (EN-GJL-50) 6204ZZC3 6305ZZC3 No Description Motor Protector Shaft Rotor Stator complete Motor Frame Handle Shaft Sleeve Qty. Remarks SUS420J2 (EN-X30Cr3) FC50 (EN-GJL-50) Steel Plate SPCC + Rubber NBR SUS304 (EN-X5CrNi8-0) Heltorfer Str Düsseldorf Germany Tel.: Fax:

7 Pump Performance Curve KTZ Discharge Bore Total Head Capacity Motor Output Motor Input Phase Voltage Frequency Rated Current Starting Current Poles Revolution Starting Method Insulation Class ,30 2,20 3, , S.S direct on line F mm m m 3 /min kw kw V Hz A A r.p.m. Total Head m Pump Eff. % Output kw Heltorfer Str Düsseldorf Germany Tel.: Fax: