VIESMANN VITOLADENS 300-T Oil Unit condensing boiler 35.4 to 53.7 kw

Transcription

1 VIESMANN VITOLADENS 00-T Oil Unit condensing boiler 5.4 to 5.7 kw Datasheet Part no. and prices: see pricelist VITOLADENS 00-T Type VWB Ultra-low temperature oil boiler with condensing heat exchanger With Vitoflame 00 blue flame oil burner (5.4 to 5.7 kw). For open and balanced flue operation and for operation with fuel oil DIN EL Standard, low sulphur fuel oil DIN EL and fuel oil DIN EL A Bio 10: Suitable for low sulphur fuel oil EL with up to 10 % bio-components (FAME). 5/201

2 Vitoladens 00-T, type VWB The Vitoladens 00-T is the world's most widely sold oil condensing boiler, and comes at a particularly attractive price. In the output range 5.4 to 5.7 kw the Vitoladens 00-T offers an ideal opportunity for incorporating oil condensing technology in modernisation projects. The use of high quality materials and proven components ensures that the Vitoladens 00-T is very economical and reliable. The Vitoflame 00 Unit blue flame burner stands for particularly clean, environmentally responsible and efficient combustion. The two-stage heat recovery of the Vitoladens 00-T comprises the proven biferral composite heating surface and the corrosion-resistant stainless steel Inox-Radial heat exchanger, installed downstream of the boiler. This principle ensures that combustion and condensation occur in physically separate locations, so the combustion gases condense in an area that is free from deposits. In practice, this means longer-than-average service intervals for combustion chamber cleaning and significantly lower maintenance costs. A Highly effective thermal insulation B Inox-Radial heat exchanger C Integral silencer D Biferral cast iron and steel composite heating surface E Vitotronic control unit F Vitoflame 00 Unit oil burner Standard seasonal efficiency [to DIN]: up to 97 % (H s ) [gross cv] / 10 % (H i ) [net cv] Most widely sold oil condensing boiler worldwide Durable stainless steel biferral composite heating surface, proven in millions of boilers Corrosion-resistant stainless steel Inox-Radial heat exchanger Easy access to the heat exchanger surfaces for cleaning Quiet operation thanks to integral silencer Flexible siting with choice of open or balanced flue operation Easy-to-operate Vitotronic control unit with plain text and graphic display All commercially available EL-type fuel oils can be used. Also for fuel oil DIN EL A Bio 10: Low sulphur fuel oil EL with up to 10 % bio-components (FAME) 2 VIESMANN VITOLADENS 00-T

3 Specification Rated heating output T F /T R = 50/0 C kw T F /T R = 80/60 C kw Product ID CE-005BO107 Boiler body dimensions Length g mm Width d mm Height k mm Overall dimensions Total length h incl. flue gas heat exchanger mm Total width e mm Total height b (when operational) mm Height a (control unit in operating position) mm Height f (control unit in maintenance position) mm Plinth height *1 mm Height s (DHW cylinder below the boiler) Capacity 10 to 200 l mm Capacity 50 l mm Weight, boiler body kg Total weight kg 242 Boiler with thermal insulation, heat exchanger, burner and boiler control unit Power consumption *2-100 % of rated heating output W % of rated heating output W Appliance in standby mode W Boiler water content (Boiler and heat exchanger) l Permiss. operating pressure bar MPa Boiler connections Boiler flow and return G 1½ 1½ 1½ Safety connection (safety valve) G 1½ 1½ 1½ Drain R ¾ ¾ ¾ Filling R ½ ½ ½ Condensate drain/connection Ø mm Flue gas parameters Temperature At 0 C return temperature C At 60 C return temperature C Mass flow rate for fuel oil EL kg/h Standard seasonal efficiency [to DIN] At heating system temp. 50/0 C % 97 (H s ) [gross cv] / 10 (H i ) [net cv] Flue gas connection Ø mm Ventilation air connection Ø mm Available draught Pa mbar Sound power level (To EN ISO ) In balanced flue operation db(a) In open flue operation db(a) *1 When operating the boiler with a neutralising system and without a cylinder below the boiler, order the plinth separately. *2 Standard parameter. VITOLADENS 00-T VIESMANN

4 f i k Specification (cont.) KTS SA KV 120 AGA KR l m BH c b a A d e 55 9 g KOA h 19 E RLU 250 n A Plinth AGA Flue outlet E Drain and diaphragm expansion vessel connection BH Fill valve KOA Condensate drain KR Boiler return KTS KV RLU SA Boiler water temperature sensor Boiler flow Ventilation air connection for balanced flue operation. The heat exchanger can be installed so that the left or right connectors can be used for the boiler return and boiler flow. Safety connection (safety valve) l m KV/KR RLU p q r o s B B Vitocell 100-H or Vitocell 00-H (for specification see chapter "DHW cylinders") KR Boiler return KV Boiler flow RLU Ventilation air connection for balanced flue operation. The heat exchanger can be installed so that the left or right connectors can be used for the boiler return and boiler flow. 4 VIESMANN VITOLADENS 00-T

5 Specification (cont.) Dimensions Rated heating output (T F /T R =50/0 C) kw a mm b mm c mm d mm e mm f mm g mm h mm i mm k mm l mm m mm n mm With DHW cylinder below the litre 160 and boiler o mm p mm q mm r mm s mm Pressure drop on the heating water side 00 0 The Vitoladens 00-T is only suitable for fully pumped hot water heating systems Pressure drop mbar kpa Flow rate in m³/h VITOLADENS 00-T VIESMANN 5

6 Specification (cont.) Minimum clearances c Rated heating output (T F /T R =50/0 C) kw a mm b mm c mm d mm a b d Dim. a: Maintain this space in front of the boiler to enable the removal of the combustion chamber with silencer. Dim. c: Without DHW cylinder below the boiler. Dim. d: With DHW cylinder below the boiler (50 litre capacity). A Combustion chamber B Boiler C DHW cylinder D DHW cylinder sensor well (only for 50 litre capacity) Subject to technical modifications. Viessmann Werke GmbH&Co KG D-5107 Allendorf Telephone: Fax: Viessmann Limited Hortonwood 0, Telford Shropshire, TF1 7YP, GB Telephone: Fax: info-uk@viessmann.com 6 VIESMANN VITOLADENS 00-T