DUAL FUNCTION MAGNETIC ROWING MACHINE

Transcription

1 DUAL FUNCTION MAGNETIC ROWING MACHINE SF-RW5622 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or SUNNY ( ).

2 IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician s advice is essential if you are taking medication that affects your heart rate, blood pressure or cholesterol level. 2. Be aware of your body s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program. 3. Keep children and pets away from the equipment. The equipment is designed for adult use only. 4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 4 feet (1.2 M) of free space all around it. 5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear. 6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified. 7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment. 8. Do not place fingers or objects into the moving parts of the equipment 9. The maximum weight capacity of this unit is 275 pounds (125 KG). 10. The equipment is not suitable for therapeutic use. 11. To avoid bodily injury and/ or damage to the product or property, proper lifting and moving is required. 12. Your product is intended for use in cool, dry conditions. You should avoid storage in extreme cold, hot or damp areas as this may lead to corrosion and other related problems. 13. This equipment is designed for indoor and home use only! It is not intended for commercial use! 1

3 EXPLODED DIAGRAM 2

4 PARTS LIST No. Description Spec. Qty No. Description Spec. Qty 1 Main Frame 1 39 Magnet 1 2 Large Knob M10X Cap 4 3 End Cap 2 41 Bearing Foam Grip 2 42 PU Wheel 4 5 Handlebar 1 43 Sleeve Computer 1 44 Plate 1 7 Tension Control 1 45 Screw M Flat Washer D Connection Wire 1 9 Nylon Nut M Sensor 1 10 Flat Washer D Bracket 2 11 Pedal 1pr 49 Bolt 2 12 Hex Bolt M Flywheel 1 13 Seat 1 51 Flywheel Plate 1 14 Hex Bolt M Axle Spring Washer D8 4 15L/R Foot Plate 1pr 53 Bearing 4 16 Nylon Nut M Wheel 2 17 Flat Washer D Hex Bolt 6 18 Seat Bracket 1 56 Spring Washer 6 19 Hex Bolt M Flat Washer 6 20 Sleeve Wheel 1 21 Wheel 2 59 Screw St4.2x Slide Rail 1 60L/R Cover 1pr 23 Eva Cushion 2 61 Flange Nut 1 24 Stopper 4 62 Hex Nut 3 25 Hex Bolt M Belt 1 26 Screw M Spring 1 27 Small Knob M8X Axle 1 28 Support Frame 1 66 Screw St4.2x Rear End Cap 2 67 Bearing 2 30 Carriage Bolt M Screw 3 31 Arc Washer D8 2 Φ Flywheel Plate Cover 1 32 Cap Nut M Sleeve Front Stabilizer 1 71 Sleeve Front End Cap 2 72 Housing Seat 1 35 Flat Washer D Axle Spring Washer D Sensor Wire 1 74 Wrench S=17, Screw ST Wrench S=13, Square End Cap 1 76 Spanner S=13,14,

5 HARDWARE PACKAGE #30 M8X73 2PCS #31D8 2 Φ25 2PCS #32 M8 2PCS #35 D10 1PC #14 M10X108 2PCS #8 D10 4PCS #9 M10 2PCS #17 D8 3PCS #12 M12X155 4PCS #10 D13 2PCS #25 M8X80 1PC #16 M8 1PC #2 M10X25 1PC #27 M8X25 1PC #44 1PC #74 S=17,19 2PCS #75 S=13,14 1PC #76 S=13,14,15 1PC Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: The model number (found on cover of manual) The product name (found on cover of manual) The part number found on the EXPLODED DIAGRAM and PARTS LIST (found near the front of the manual) Please contact us at support@sunnyhealthfitness.com or SUNNY( ). 4

6 ASSEMBLY INSTRUCTIONS STEP 1: Remove the pre-assembled 2 Carriage Bolts (No. 30), Shipping Tubes (A), 2 Arc Washers (No. 31), and 2 Cap Nuts (No. 32) from the Main Frame (No. 1) using Wrench (No. 74). Attach the Front Stabilizer (No. 33) to the Main Frame (No. 1) with 2 Carriage Bolts (No. 30), 2 Arc Washers (No. 31), and 2 Cap Nuts (No. 32) using Wrench (No. 74). STEP 2: Remove 2 Stoppers (No. 24) and 2 Screws (No. 45) from the Slide Rail (No. 22), then insert the Seat Bracket (No.18) onto the Slide Rail (No. 22), and tighten 2 Stoppers (No. 24) to the Slide Rail (No. 22). Attach the Plate (No. 44) to the Slide Rail (No. 22) with 2 Screws (No. 45) using Spanner (No. 76). 5

7 STEP 3: Attach the Support Frame (No. 28) to the Slide Rail (No. 22) with Hex Bolt (No. 25), 2 Flat Washers (No. 17),and Nylon Nut (No. 16) using Wrench (No. 75) and Spanner (No. 76).Affix with Small Knob (No.27) and Flat Washer (No. 17). STEP 4: Connect the Connection Wire (No. 46) to Sensor Wire (No. 36), then tighten the Slide Rail (No. 22) and Foot Plate (No. 15L/R) to the Mainframe (No. 1) with 2 Hex Bolts (No. 14), 4 Flat Washers (No. 8), Large Knob (No. 2), Flat Washer (No. 35) and 2 Nylon Nuts (No. 9) using Wrench (No. 74).Finally cover with 4 Caps (No. 40). Attach 4 Hex Bolts (No. 12) through the Pedals (No. 11) and 2 Flat Washers (No. 10) to the Mainframe (No. 1). Tighten with Wrench (No. 74). The assembly is complete! 6

8 ADJUSTMENT GUIDE CAUTION! Moving parts, such as the seat, can crush and cut. Keep hands clear of the sliding rail during use! ADJUSTING THE RESISTANCE Rotate the Tension Control (No.7)clockwise to increase the level of resistance. Rotate the tension control counter-clockwise to decrease the level of resistance. MOVING THE MACHINE To move the machine, lift the rear stabilizer until the transportation wheels on the front stabilizer touch the ground. With the wheels on the ground, you can transport the rower to the desired location with ease. PEDAL STRAP ADJUSTMENT The pedal strap is adjustable and can be personalized to fit the user s foot size. 7

9 FOLDING THE MACHINE Figure A CAUTION! Move with caution when you vertically fold the Slide Rail (No. 22) as your head may touch the Support Frame (No. 28). When not in use, you can save space by folding the Slide Rail (No. 22). Unscrew the Large Knob (No. 2), and the Flat Washer (No. 35). (Figure A) Fold the Sliding Rail (No. 17) to vertical angle. (Figure B) SAFETY NOTE: the Seat (No. 13) will glide down when folding the Slide Rail (No. 22). Hold the seat and then fold the Slide Rail (No. 22) up. Lower the seat all the way down. Insert the Large Knob (No. 2) and Flat Washer (No. 35) into the aligned holes in the Slide Rail (No. 22) and tighten. Figure B CAUTION! The Seat (No. 13) will glide down when folding the Slide Rail (No. 22)! 8

10 USING THE MACHINE The Dual Function Magnetic Rowing Machine lets you work out in multiple ways. You can use it as a traditional rowing machine or use it to do upper body strength exercises. When using it as a rowing machine, make sure to put your feet in the Pedals (No. 11) and use the straps. When using it to do upper body exercises, turn the Pedals (No. 11) forward, so they are out of the way. Move the Seat (No. 13) towards the middle of the Slide Rail (No. 22). Stand on the Foot Plates (No. 15). Pull on the Handlebars (No. 5) to do the exercises. 9

11 METER INSTRUCTIONS The meter will turn on once the rowing machine is in use. MODE - Push to select functions. - Push and hold for 2 seconds to reset all functional value, except total count. FUNCTIONS: 1. SCAN: When in SCAN, the meter will rotate through the following functions: time, count, total count, calorie, and count/min. Each function will display for 6 seconds. 2. DISTANCE: Counts the distance rowed. 3. TIME: Counts the rowing time from exercise start to end. 4. COUNT: Counts the rowing strokes from start to end. 5. TOTAL COUNT: Counts the total rowing strokes from start to end. 6. CALORIES: Counts the total calories from rowing start to end. 7. COUNT/MIN: Displays current rowing strokes per minute, or the frequency per minute. 8. AUTO ON/OFF & AUTO START/STOP: Press the MODE button or start rowing, and the meter will turn on. After 4 minutes of inactivity, the meter will turn off. SPECIFICATIONS: AUTO SCAN Every 6 seconds DISTANCE 0:00~99:59MI TIME 0:00~99:59(Minute:Second) FUNCTION TOTAL COUNT 0~9999 COLORIES 0.0~999.3Kcal COUNT/MIN 0~1200 COUNT 0~9999 PULSE(if have) BPM(beat per minute) BATTERY TYPE 2pcs of SIZE- AA or UM-3 OPERATING TEMPERATURE 0 C~+40 C(32 F~104 F) STORAGE TEMPERATURE -10 C~+60 C(14 F~168 F) 10

12 REPLACE THE BATTERIES Two AA batteries are included in Computer (No.6). To replace the batteries, remove the Computer (No.6) from Main Frame (No. 1), then replace both batteries. Do not mix battery types and do not mix old and new batteries. After the replacement, put Computer (No.6) back onto the Main Frame (No. 1).Dispose or recycle batteries according to your state and local rules. Version