TECHNICAL SPECIFICATIONS B6VMMX

Transcription

1 TECHNICAL SPECIFICATIONS BVMM Series Air Handler with TV, -, Btuh (Heat Pump & Air Conditioner) R-4A Refrigerant The BVMM Series of air handlers, when combined with our heat pump or air conditioner, offers a full line of quality, split system heating and cooling equipment. FEATURES and BENEFITS Energy Efficient Variable Speed ECM Motor: Advanced technology provides field-selectable cooling airflows and automatically sets heating airflows based on the amount of installed heat. Quiet Blower Operation: Extra quiet and smooth blower on and off cycles. Constant airflow: Motor automatically adjusts to different static loads. Reduced air stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities. Multi-poised: Can be used in horizontal, upflow, downflow and vertical applications. Built in Filter Rack: makes the air handler easy to service. Plug-in Heater Kit: Available in kw through 3 kw (Not for use in Volt units) Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Breaker Accessibility: Breaker accessible from the front of the unit when heater is applied. Plastic Drain Pan: Provides corrosion resistance. Durable Cabinet: Galvanized steel with a polyurethane finish. The finish will endure 9 hours of salt spray and resist corrosion % better than comparable units. Designed to meet the requirements.2.a.2: Meets Florida building code requirements for air leakage. Thermal Expansion Valve: Factory installed externally equalized thermal expansion valve provides precise refrigerant control under varying load conditions. Cabinet Insulation: " insulation with an R-value of 4.2 contributes to quiet operation and prevents cabinet sweating in difficult applications. Anteater MCTM Micro-Channel Coil Technology: All aluminum coil provides high corrosion resistance.

2 MODEL IDENTIFICATION CODE B V M M 3 K B Indoor Air Handler Cabinet Identifier A = 4 /4" Width B = 9 " Width C = 22 /2" Width Design Series Motor: V = Variable Speed Electrical Code K = 2/ Configuration: M = Multipoise Anteater MCTM Micro-Channel Coil Technology Nominal Capacity () Btuh = TV ACCESSORIES Cabinet Size Accessory Kit Description A B Part Number C 9342 Downflow Adaptor Kit Single Circuit Adaptor for 2 Circuit Breakers 934 Single Circuit Adaptor for 3 Circuit Breakers 93 24v Single-Phase Electric Heater Kits Nominal KW Matched Units Part Number 24K-A 24K-B 3K-A 3K-B 3K-B 42K-B 4K-C K-C With Circuit Without Circuit Breakers Breakers v Three-Phase Electric Heater Kits Nominal KW 2 Matched Units Part Number 24K-A 24K-B 3K-A 3K-B 3K-B 42K-B 4K-C K-C With Circuit Without Circuit Breakers Breakers

3 SPECIFICATIONS Model BVMM 24K-A 24K-B 3K-A 3K-B 3K-B 42K-B 4K-C K-C TV TV TV TV TV TV TV TV Maximum Available Auxiliary Heat (kw) Nominal Blower Size (D W) x x x x x x x x /2 /2 /2 /2 /2 /2 2 x 2 x x 2 x x 2 x x 2 x 2 x 2 x 2 x 2 x Refrigerant Flow Control Variable Speed Motor HP 2 x 2 x 2 x x Filter Size Approximate Shipping Weight (lbs.) 93 NOTES: See current AHRI Directory for certified combinations and ratings. DIMENSIONS Models BVMM Height Width 24K-A 43 /2 24K-B Refrigerant Connections Filter Size Supply Air Duct Dimensions Suction Dia. Liquid Dia. 4 /4 3/ 2 x 2 x 2 / x 2 43 /2 9 / 3/ x 2 x 2 / x /4 3K-A 43 /2 4 /4 3/ 2 x 2 x 2 / x 2 3K-B 43 /2 9 3/ x 2 x 2 / x /4 3K-B 49 /2 9 / 3/ x 2 x 2 / x /4 42K-B 49 /2 9 / 3/ x 2 x 2 / x /4 4K-C 22 /2 / 3/ 2 x 2 x 2 / x 2 K-C 22 /2 / 3/ 2 x 2 x 2 / x 2 3

4 DIMENSIONS 3 / K.O. (typ.) A /" K.O. /4 / / 2 / / / 3 / /4 3 /4 / /" K.O. / K.O. (typ.) / K.O. (typ.) DETAIL D H 3 /4 2 /4 SUCTION LIQUID /4 3 W 22" 4

5 ELECTRICAL DATA

6 AIRFLOW SELECTION FOR VARIABLE SPEED MODELS Cooling = OFF, = ON BVM A-cabinet Heating COOL Switch Setting = OFF, = ON = OFF, = ON Heater Kit Installed (KW) Cooling = OFF, = ON BVM B-cabinet Heating COOL Switch Setting = OFF, = ON = OFF, = ON Heater Kit Installed (KW) Cooling ( = either or ) BVM C-cabinet Heating COOL Switch Setting = OFF, = ON ( = either or ) Heater Kit Installed (KW) NOTES: values listed are for 24V operation. For 2V operation, multiply A & B cabinet values by.9; for C-cabinet values multiply by.9 When matched with two-stage outdoor units the airflow on low (Y or W) input only will be % of the values shown in this table.

7 COOLING AIRFLOW SETTINGS A-Cabinet Switch Settings ( = ON, = OFF) TON 2. TON 2 TON 2 Nominal Capacity. TON CFM CFM Switch Settings ( = ON, = OFF) TON TON 4 TON 3. TON 3 TON TON Nomical Capacity TON Nominal Capacity 4 TON Switch Settings ( = ON, = OFF) 3 TON CFM C-Cabinet 3. TON B-Cabinet

8 GENERAL TERMS OF LIMITED WARRANTY Nortek Global HVAC LLC will furnish a replacement for any part of this product which fails in normal use and service within the terms and conditions of the warranty. For complete details of the Limited Warranty, including applicable terms and conditions, see your local installer or contact the Nortek Global HVAC LLC warranty department for a copy. Before purchasing this appliance, read important energy cost and efficiency information available from your retailer. Specifications and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A ( /2) 3E-4 (Replaces 3E-3) Powered by TCPDF ( Trademark Frigidaire is a registered trademark used under license from Frigidaire International Company, U.S.A. Nortek Global HVAC LLC. All Rights Reserved.