Operating instructions

Transcription

1 Operating instructions Vacuum cleaner S 4002 To prevent accidents en - US, CA and appliance damage, read these instructions before installation and use. M.-Nr

2 Contents IMPORTANT SAFETY INSTRUCTIONS Guide to the machine Before using the vacuum cleaner Using the included accessories Operation Power cord Turning the vacuum on and off...16 Adjusting the suction...18 Opening the air inlet valve...20 Transport and storage Maintenance and care Purchasing new dustbags and filters...22 Which dustbags and filters are the right ones?...22 When to change the dustbag...23 Replacing the dustbag...24 Replacing the exhaust filter...25 Exhaust filter change indicator...26 Replacing the "Air Clean" filter Replacing the "ActiveAirClean" filter and the "Active HEPA" filter Exchanging exhaust filters When to change the dust compartment filter (motor protection) Replacing the dust compartment filter (motor protection) When to change the radio handpiece battery...30 How to change the radio handpiece battery...30 When to change the thread catcher pads of the SBD floor tool and upholstery tool...31 Replacing the thread catchers...31 Servicing the floor roller of the SBD floor tool...31 Cleaning and care Frequently asked questions Optional accessories Caring for the environment

3 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING- To reduce the risk of fire, electric shock or injury: Before using Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet. Your power source should correspond with the voltage rating plate located on the underside of the vacuum. Use only household AC outlets. Never use DC power sources. If you are not sure of your home s voltage supply, consult a qualified electrician. Connecting the vacuum cleaner to a higher voltage than indicated in these instructions may result in damage to the vacuum cleaner or injury. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not alter the plug in any way. A damaged vacuum cleaner can be dangerous. Check the packaging, vacuum cleaner and accessories for any signs of damage. Do not use a damaged appliance. Do not use with a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors or submerged in water, bring it to a service center. The electrical outlet must be fitted with a 15 A fuse. 3

4 IMPORTANT SAFETY INSTRUCTIONS Use Do not use on people or animals. Do not use outdoors or on wet surfaces. Only dry surfaces should be vacuumed. Use only as described in this manual with Miele recommended accessories. This appliance is intended strictly for household use only. Do not allow the vacuum cleaner to be used as a toy. Close attention is necessary when used near children. Never use the vacuum cleaner without the dustbag or filters in place. Otherwise it could be damaged. If a dustbag is not inserted, the dust compartment lid will not close. Do not force it shut. Do not leave the vacuum plugged in. Unplug it from the outlet when not in use and before servicing. On the underside of the vacuum handpiece is a metal insert designed to absorb static electricity. Please make certain that your hand remains around this metal insert when vacuuming. Persons which lack physical, sensory or mental abilities or experience with the machine should not use it without supervision or instruction by a responsible person. Unwind the cord completely to aid the vacuum in dissipating heat. This vacuum should not be used to entrap or retain any hazardous materials. Do not use the vacuum cleaner to pick up liquids or damp dirt. This could impair the electrical safety of the vacuum cleaner. Wait for freshly shampooed carpets to dry. Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes. The vacuum cleaner could catch fire. Do not vacuum toner dust. Toner, such as that used in printers and photocopiers can conduct electricity. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present. The vacuum cleaner could explode. Do not vacuum items which are heavy, hard or have sharp edges. They could cause a blockage and damage the appliance. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces. 4

5 IMPORTANT SAFETY INSTRUCTIONS Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. Do not handle the plug or vacuum with wet hands. Keep the power cord, hair, loose clothing, fingers and all parts of the body away from openings and moving parts. Do not place anything into the openings of the vacuum cleaner. Do not use if any openings are blocked; keep them free of dust, lint, hair, or anything that may reduce air flow. This appliance is equipped with a power cord reel. Hold the plug when rewinding onto cord reel. Do not allow the plug to whip when rewinding. Turn off all controls before unplugging. Use extra care when cleaning on stairs. Floor attachments, accessories and wands must not be used at head level to avoid injury to eyes and ears. Monitor the dustbag change indicator and inspect all filters regularly. For best performance, the dustbag and filters should be replaced when necessary. A full bag or blocked filter will reduce the vacuum cleaner s suction power. A temperature limiter automatically switches the vacuum cleaner off if it gets too hot, see "Frequently asked questions". Using accessories The hose and the telescopic wand contain electrical wires. Do not use the vacuum cleaner if these parts are damaged, cut or punctured. Avoid picking up sharp objects. Danger of electric shock! Unplug the vacuum when changing accessories, especially the Turbobrush, and Powerbrush. To avoid the risk of injury when vacuuming with a Miele Power or Turbobrush do not touch the rotating roller brush. Danger of injury. 5

6 IMPORTANT SAFETY INSTRUCTIONS The socket on the vacuum cleaner (depending on model) must only be used for the Miele Powerbrush specified for use with this appliance. Danger of injury. The Miele Powerbrush is a motor driven accessory for use only with Miele vacuum cleaners. The vacuum cleaner must not be used with another manufacturer s powerbrush. Do not use the vacuum without an accessory attached. The rim could be damaged and injuries could result from sharp edges. Miele dust bags are disposable and intended to be used only once. Do not attempt to reuse. An over stuffed dustbag will reduce the efficiency of the vacuum cleaner. Only use genuine Miele dustbags with the Miele quality signet and original Miele filters and accessories. Only then will the manufacturer guarantee its safety. Cleaning, maintenance and repairs Turn the vacuum cleaner off after each use and before every cleaning / maintenance. Pull the plug from the outlet. Never submerge the vacuum cleaner in water. Clean only with a dry cloth or slightly damp cloth when disconnected from the mains supply. If moisture gets into the appliance there is a risk of electric shock. Monitor the dustbag change indicator and inspect all filters regularly. For best performance, the dustbag and filters should be replaced when necessary. A full bag or blocked filter will reduce the vacuum cleaner s suction power. A temperature limiter automatically switches the vacuum cleaner off if it gets too hot, see "Frequently asked questions". Repairs must only be performed by an authorized service agent in accordance with national and local safety regulations. Unauthorized repairs could cause injury or machine damage. The manufacturer cannot be held responsible for unauthorized work. If the power cord is damaged it should be replaced along with a new cable reel by Miele Technical Service. Disposal Remove the battery from the radio handpiece and recycle it. Before discarding an old vacuum cleaner, please cut off the power cord and render the plug useless. Ensure the appliance presents no danger to children while being stored for disposal. 6

7 IMPORTANT SAFETY INSTRUCTIONS FCC and Industry Canada information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. SAVE THESE INSTRUCTIONS 7

8 Guide to the machine Some models come standard with a Turbobrush, which is not shown in this figure. A separate Operating manual is supplied with the vacuum. 8

9 Handpiece (some models may include an air inlet valve) * Suction power buttons + / * Standby switch * LED * Locking button Accessory clip Telescopic wand release button * Dust compartment lid release Telescopic wand * Dustbag Carrying handle Floor tool * Transport/storage holder Dust compartment filter (motor protection) Exhaust filter * Suction power selector * Standby indicator * Thermo indicator * Exhaust filter change indicator (Reset button) * Power cord with plug Cord rewind switch Park-System On / Off switch Airflow indicator Elbow Suction hose Guide to the machine The features marked * may vary or not be available depending on your model. 9

10 Attaching the suction hose Insert the elbow into the suction socket until it clicks. Use the inlet guides to direct insertion. Before using the vacuum cleaner Removing the suction hose Press the release buttons at the sides of the elbow and lift the hose from the socket. Connecting the handpiece and telescopic wand Insert the handpiece into the telescopic wand until it clicks. Use the inlet guides to direct insertion. To release the handpiece from the telescopic wand press the locking button (see arrow) and pull the handpiece away from the telescopic wand. 10

11 Depending on your model, the vacuum will include one of the following telescopic wands: Fitted wand (CDN only) Telescopic wand XXL telescopic wand Inserting the fitted wand Both sections of the telescopic wand have locating arrows to guide insertion. Before using the vacuum cleaner Adjusting the telescopic wand One section of the telescopic wand is inside the other and can be adjusted for comfortable vacuuming. Press the telescopic wand release button (see arrow) to release the tubes and adjust to the desired height. Adjusting the XXL telescopic wand This telescopic wand consists of three sections which are height-adjustable. Pull and extend the lower section of the wand,, until it clicks. Press the release button if you want to retract the lower section again. Press the adjustment button,, to release the tubes and adjust to the desired height. 11

12 Before using the vacuum cleaner Attaching the floor tool/brush Insert the wand into the floor brush and twist until it locks with a click. To release the floor brush from the telescopic wand, press the locking button (see arrow) and pull the wand out of the floor brush. Observe the cleaning instructions of the floor manufacturer. SBB Floor brush The floor brush is suitable for cleaning all hard flooring. SBD Floor tool The floor tool is suitable for cleaning carpets, rugs, and hard surfaces. For flooring susceptible to scratches, use one of the special Miele floor brushes (see "Optional accessories"). To clean carpets and area rugs Press the foot switch marked. To clean hard flooring Press the foot switch marked. Turbobrush Some models come with a Turbobrush as an accessory. Please refer to the separate operating instructions for instruction on use and maintenance. 12

13 The following accessories are included Dusting brush Upholstery tool Crevice nozzle Accessory clip for the respective included accessories Symbols on the holder show where to attach the different accessories. Using the included accessories Accessory clip Attach the accessory clip to the telescopic wand. 13

14 Floor brush SBB (depending on model) For cleaning all hard flooring. Especially suitable for vacuuming niches and tight spaces. Using the included accessories Floor tool SBD (depending on model) The standard floor brush can be used for normal cleaning of carpets, rugs, hard surfaces, carpeted stairs, etc. 14

15 Crevice nozzle For cleaning in folds, crevices and corners. Using the included accessories Upholstery nozzle For cleaning upholstery, mattresses, cushions, curtains, covers, etc. Dust brush with natural bristles For cleaning moldings, decorative or carved items, etc. The head of the dusting brush can be swivelled to attain the best cleaning position. For dusting particularly delicate objects. 15

16 Operation Power cord Unwind the cable completely to aid the vacuum in dissipating heat. Unwinding Hold the plug and pull the power cord out to the required length (maximum 18 ft / 5.5 m). To reduce the risk of electric shock, the vacuum has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not alter the plug in any way. Danger of overheating and damage. Rewinding Unplug the vacuum from the outlet. Press the rewind switch briefly and the power cord will rewind automatically. Press the rewind switch again to stop the rewinding. Hold the plug so that it does not whip around when rewinding. Turning the vacuum on and off Press the On/Off switch. 16

17 Operation Models with radio frequency controls The operating state is shown by the Standby indicator on the vacuum. The vacuum can be switched to a standby mode during pauses. Press the Standby button on the handpiece. To turn the vacuum on again: Press the Standby button on the handpiece. The vacuum cleaner turns on to the last selected power level. Press to turn the vacuum cleaner on at the lowest power level. Press + to turn the vacuum cleaner on at the highest power level. Every push of a button on the radio handpiece is displayed by the indicator light. The vacuum can still be used if the battery in the radio handpiece is weak or not inserted at all. Turn the vacuum on with the foot switch. Press the Reset button. The vacuum will operate continuously on the maximum suction power. Turn the vacuum off with the foot switch. Only use the Standby mode for short pauses during vacuuming. Do not leave the vacuum in Standby mode, there is a danger of overheating and damage. 17

18 Operation While vacuuming The vacuum cleaner can also stand on its end for vacuuming stairs, drapes etc. To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum handpiece. Be certain to continuously touch this inlay when vacuuming fine dust, flour or sawdust as these materials are more likely to create a static discharge. To further prevent static discharge while vacuuming, pull the vacuum along by the hose with one hand while continuing to hold the handpiece in the other hand. Adjusting the suction The symbols on the controls indicate what each setting is suitable for. curtains, lightweight fabrics upholstery, cushions thick pile carpets, rugs and runners energy-saving, daily use lightly soiled textured carpets textured hard flooring, and intensive cleaning of carpets 18

19 Operation The controls vary from model to model, and are described as follows. Rotary selector Turn the rotary selector to the desired suction power setting. + / controls Press the controls until the light bar above the desired suction power setting is illuminated. Press the + control to select a higher setting. Press the control to select a lower setting. +/ at the radio handpiece Press the controls until the desired suction power is shown in the vacuum display on the canister. Press the + control to select a higher setting. Press the control to select a lower setting. Every push of a button at the handpiece is displayed by the indicator light. 19

20 Operation Opening the air inlet valve (not available in models with radio handpiece) The air inlet valve is designed to provide a quick, convenient reduction of suction power, e.g. when moving from a carpet to an area rug. Open the air inlet valve far enough to reduce the power. Opening the air inlet valve reduces the power to the tool being used. 20

21 Park-System A Park-System has been designed to conveniently park the telescopic wand at the vacuum cleaner during pauses. A special parking attachment is fitted to all floor brushes. Insert the lower clip of the floor brush into the slot on the end of the vacuum cleaner from above. Transport and storage Transport and storage For easier transportation and storage stand the vacuum cleaner vertically. insert both clips of the floor brush into the two point holder on the side of the vacuum. insert one part of the telescopic wand into the other (depending on model). 21

22 Maintenance and care Turn off and unplug the vacuum cleaner before performing any maintenance work. The Miele filter system consists of the following three components. Dustbag Exhaust filter Dust compartment filter Each of these components must be changed periodically to maintain the vacuum cleaner s efficiency. Only use Miele dustbags, filters and accessories with the "Original Miele" logo. Only then can the suction power of the vacuum cleaner reach its optimum potential creating the best possible cleaning results. The use of dustbags made of paper or a similar material, or dustbags with a cardboard retaining plate can lead to serious damage to the vacuum cleaner and possibly voiding the warranty, just as with the use of dustbags without the "Original Miele" logo. Purchasing new dustbags and filters Original Miele dustbags and filters can be purchased from an authorized Miele vacuum dealer or by visiting the Miele store at Which dustbags and filters are the right ones? This vacuum cleaner uses Original Miele dustbags Type F/J/M and an Original Miele filters, the "Original Miele" Logo will appear on the packaging or directly on the dustbag. An "Air clean" exhaust filter and a dust compartment filter are supplied with every box of Miele dustbags. If you would like to purchase additional Miele filters separately, contact your vacuum dealer or Miele, please quote the model number of your Miele vacuum cleaner to ensure correct parts are ordered. These parts are also available to order from the online Miele store. The exhaust filter supplied with the vacuum cleaner can be exchanged with another type of Original Miele filter (see "Exchanging exhaust filters"). 22

23 When to change the dustbag Change the dustbag when the colored marker in the airflow indicator fills the display. The dust bags are disposable and intended to be used only once. Do not attempt to reuse. Checking the airflow indicator Maintenance and care Perform this test with the SBD floor tool only, since other attachments can affect the function of the airflow indicator. If your vacuum cleaner is equipped with the SBB 300-3, the test cannot be performed. Attach the floor tool to the vacuum cleaner. Turn the vacuum cleaner on and select the highest power setting. Lift the floor tool slightly off the floor. If the marker completely fills the indicator window, the dust bag needs to be changed. How the airflow indicator works The airflow indicator is designed to show when the bag is full of common household dust and to measure the amount of air flow through the dustbag. Normal household dust is a mixture of dust, hair, carpet fluff, threads, sand, etc. However, if fine dust, such as drill dust, sand, plaster or flour is vacuumed, the pores of the dustbag will become blocked. The marker will indicate that the bag is "full" even when it is not. The dustbag should be changed because the suction power is greatly reduced. If the bag is bulging with pet fur, hair, carpet fluff, etc., the indicator may not register "full". This is because the air flow of the dustbag may still be high enough not to activate the marker to show maximum. The dustbag should still be changed. 23

24 Maintenance and care Replacing the dustbag Open the dust compartment lid. The dustbag has a closing flap which closes automatically when the dust compartment lid is raised to prevent any dust from escaping. Grasp the collar and remove the dustbag from the holder. Insert the new dust bag as far as it will go into the dustbag holder. Do not unfold the dustbag when taking it out of the box. Unfold the dustbag in the dust compartment. Close the dust compartment lid until it clicks into place. Take care not to catch the dust bag in the lid. A empty-operation-barrier will block the dust compartment lid from closing if no dustbag is inserted or if it is not inserted all the way. Do Not Use Force! 24

25 Replacing the exhaust filter Depending on model, the vacuum cleaner will be equipped with one of the following exhaust filters: a Air Clean filter b ActiveAirClean filter c Active HEPA filter "Air Clean" filter An "Air Clean" filter is supplied with every box of Miele dustbags. It should be replaced each time a new box of bags is started. "ActiveAirClean" or the "Active HEPA" filter An "ActiveAirClean" or "Active HEPA" filter should be changed approximately once a year. Change the filter sooner if it is obviously soiled or no longer effective. It is helpful to note the date directly on the filter as a reminder for when to next change it. See "Optional Accessories" for filter descriptions. Maintenance and care 25

26 Maintenance and care Exhaust filter change indicator Some models are equipped with an exhaust filter change indicator (Reset button) which is designed to alert the user when to change the "ActiveAirClean" or "Active HEPA" filter. The indicator will light after about 50 hours of operation which is equivalent to about a year of average use. The vacuum cleaner can still be used with the exhaust filter indicator lit. However, the suction power will be reduced as will the effectiveness of the filter if it is not replaced. If an Air Clean filter, a, is being used, the filter change indicator can be disregarded but should be reset when it does light. The indicator goes out when the reset button is pressed. You can replace the exhaust filter supplied with the vacuum cleaner with one of the other types of filters (see "Optional accessories"). 26

27 Replacing the "Air Clean" filter Open the dust compartment lid. Open the filter frame and remove the used "Air Clean" filter with the clean corner (see arrow). Do not use more than one filter at a time. Maintenance and care Insert the new filter. Close the filter frame. If you wish to replace the Air Clean filter with an ActiveAirClean filter or Active HEPA filter see "Maintenance and care - Exchanging exhaust filters". Close the dust compartment lid firmly until it clicks into place. 27

28 Maintenance and care Replacing the "ActiveAirClean" filter and the "Active HEPA" filter Open the dust compartment lid. Do not use more than one filter at a time. Remove the exhaust filter. Insert the new filter. If you wish to replace the ActiveAirClean filter or the Active Hepa filter with an Air Clean filter see "Maintenance and care - Exchanging exhaust filters". Close the dust compartment lid firmly until it clicks into place. Resetting the filter change indicator The filter change indicator (Reset button) must be reset each time the filter is replaced. To do this, the vacuum cleaner must be plugged in. Press and hold the filter change indicator light until it goes out. The display is now reset. 28

29 Exchanging exhaust filters 1. If you wish to replace the an Air Clean filter with the b ActiveAirClean filter or the c Active HEPA filter, you must remove the filter frame before inserting the new filter. 2. If you use an Air Clean filter a you must insert it into a filter frame. * Filter frame - see "Optional accessories". Do not use more than one filter at a time. The ActiveAirClean filter can be used instead of the Active HEPA filter and vice versa without any changes. Remember to reset the filter change indicator with the Reset button after every filter change. The indicator will go out when the reset button is pressed. Maintenance and care 29

30 Maintenance and care When to change the dust compartment filter (motor protection) Replace the dust compartment filter every time you start a new box of dustbags. A dust compartment filter is supplied with each box of Miele dustbags. Replacing the dust compartment filter (motor protection) Open the dust compartment lid. Open the filter frame, remove the old filter and replace with a new one. Close the filter frame. When to change the radio handpiece battery Every 18 months Keep a 3 V lithium (CR 2032) battery handy. How to change the radio handpiece battery Release the battery compartment cover using a suitable tool, e. g. a screwdriver. Remove the cover. Push the battery forward to remove, replace with a new one. Close the battery compartment. 30

31 When to change the thread catcher pads of the SBD floor tool and upholstery tool The thread catcher pads on the bottom of the SBD floor tool and the upholstery tool should be checked occasionally. Replace the pads if they appear worn. Maintenance and care Replacing the thread catchers Use a knife or similar object to remove the thread catchers from the slots. Insert the new thread catchers. Servicing the floor roller of the SBD floor tool Use a coin to release the roller pin and take it out,. Push and take out the roller axle,. Take out the roller,. Remove all threads, hair, etc. and reassemble the parts in the reverse order. Spare parts are available from your Miele dealer or from Miele. 31

32 Cleaning and care Turn off the vacuum and unplug it before performing any maintenance work. Vacuum cleaner and accessories External surfaces of the vacuum cleaner and accessories can be cleaned with a slightly damp cloth or with a cleaner suitable for plastics. Do not use abrasive, glass or all purpose cleaners! They will damage the surface. Dust compartment The dust compartment can, if necessary, be cleaned using a dry cloth, dusting brush or a second vacuum to suck out any Monitor the change dustbag indicator and inspect all filters regularly. Clean or replace them when necessary according to these Operating Instructions. Do not submerge the vacuum in water! If moisture gets into the appliance there is the risk of an electric shock. 32

33 Some models have a warning light which comes on to indicate overheating. If the vacuum has overheated the temperature limiter automatically turns the vacuum off. Some models also have a warning light to indicate that the vacuum has overheated. This can occur if, for instance, large articles block the suction tube or when the filter bag is full or contains particles of fine dust. A heavily soiled exhaust or dust compartment filter can also be the cause of overheating. Turn off the vacuum cleaner using the On/Off switch. Unwind the full length of the power cord. Allow the vacuum to cool down for 30 minutes. After sales service In the event of a problem that you can not fix yourself, please contact the Miele Service Department. Frequently asked questions 33

34 Optional accessories Each model may be accessorized with one or several of the following tools. Turbobrush Turbo Comfort - 3 The Turbobrush is intended for cleaning short to medium pile carpeting. It is mechanically driven by the suction power of the vacuum. In addition to dust particles it also removes stubbornly adhered threads, hairs, fluff, etc. Observe the cleaning instructions of the floor manufacturer. Hand Turbobrush Turbo Mini The Hand Turbobrush is intended for vacuuming upholstery, mattresses, car seats, carpeted stairs and other areas inaccessible with the standard Turbobrush. 34

35 Floor brush Hardfloor -3-3 To vacuum sturdy hard floors, e.g. tiles and stone floors. Optional accessories Floor brush Parquet - 3 Special brush with natural bristles intended for cleaning parquet and laminate floors, especially those susceptible to scratching. The parquet floor brush can be cleaned with the vacuum cleaner using the crevice nozzle if necessary. Floor brush - Parquet Twister with swiveling head For cleaning all hard flooring, e.g. parquet and tiles. Especially suitable for vacuuming niches and tight spaces. Floor brush - Parquet Twister XL with swiveling head For cleaning all hard flooring, e.g. parquet and tiles. The wide head makes this brush ideal for cleaning large surfaces. 35

36 Optional accessories Universal brush For dusting books, shelves, etc. Dust brush with natural bristles For dusting particularly delicate objects. Radiator brush (only usable with the crevice nozzle) For cleaning radiators, narrow shelves or crevices. 36

37 Optional accessories Mattress tool For cleaning deep crevices, mattresses and upholstery. Crevice nozzle 12" (300 mm) For cleaning in folds, crevices, corners, etc. 37

38 Optional accessories MicroSet This set is specially designed for cleaning small objects and difficult to reach areas (such as PC keyboards, stereo equipment, carved furniture and ornaments, models, etc). Contents: Micro hose with combi nozzle (crevice nozzle and dust brush) Micro dust brush Micro crevice nozzle Extension CarClean Set Plus Specially designed for cleaning car interiors. Accessory set consists of: Hand Turbobrush Micro-hose with combi nozzle Crevice tool 12" (300 mm) Accessory carrying case, 10 ft (3 m) long suction hose and holder. 38

39 ActiveAirClean filter A special active charcoal filter which absorbs odors from the dust collected in the dustbag. The "ActiveAirClean" filter can be used in place of the "Air Clean" filter. There is no difference in the fine dust performance of the "ActiveAirClean" and the "Air Clean" filter. Active HEPA Filter The "Active HEPA" filter combines activated charcoal and HEPA filtration in one. The active charcoal layer absorbs odors from the dust collected in the dustbag. Vacuum cleaners equipped with this exhaust filter are particularly suitable for allergy sufferers and those concerned with a high level of hygiene because of its ability to trap respirable particles and allergens. Filter frame The filter frame is needed if you would like to exchange an Air Clean filter with an Active air Clean or HEPA filter, see "Maintenance and care - Exchanging exhaust filters". Optional accessories 39

40 Caring for the environment Disposal of the packing materials The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. These items pose a danger of suffocation. Disposing of the dustbag and filters Genuine Miele dustbags and filters are made of environmentally friendly materials. They can be thrown out with the household trash provided the vacuum cleaner has been used only for normal household dust. 40

41 41

42 42

43 43

44 Alteration rights reserved/0410 M.-Nr / 03 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.