OIL FREE WATER INJECTED SCREW COMPRESSOR WIS 40-75

Transcription

1 OIL FREE WATER INJECTED SCREW COMPRESSOR WIS LABORATORY INDUSTRY CUSTOMER SERVICE PURE AIR

2 WHY Due to constant evolution of compressed air tools, machineries and processes, some applications require the use of compressed air totally free of oil. Food and beverage industry, white rooms, laboratories, hospitals are typical exemples; WIS can fulfi ll these oil free requirements and can also basically replace any oil lubricated installation with extra benefi ts: Peace of mind: no contamination risk by oil. Low maintenance: no line filters regular exchange required. Energy saving: no extra consumption linked to pressure drop through the fi ltration installation. Protection of the environment: no polluted condensate and no cost for their treatment. WIS are class 0 certified and ensure you the best quality of air. PURE AIR WIS Technology WIS compressors, thanks to water lubrication properties have a low air temperature increase that allows high energy effi ciency. They integrate a standard Reverse Osmosis system, which plugged to tap water, refi lls the main water fl ow when required with a water free of mineral, sediments and bacteria. Specific components also equipped the WIS to avoid premature wear linked to water aggressivity: stainless steel water tank and fi lter housing, brass couplings and connections, Aluminium/Bronze alloy screw element housing, and polymerised ceramic rotors. All WIS are controlled with a sophisticated electronic controller that allows extended communication capability, including room control of up to 4 WIS (optional).

3 WIS AIR COOLED oil free air 3 pressures ( bar). Drive effi ciency. Integrated coolers. Quiet operation. Easy installation. Easy maintenance. DIMENSION cm. Length Width Height From 40 to 75 HP, direct driven air cooled, are fi tted with a high effi ciency IP55 main motor and include a turbine and air-air / air-water stainless steel coolers that insure low compressed air outlet temperature. The element is fi tted with hydrodynamic bearings, implying no grease is required at all. WATER COOLED oil free air 3 pressures ( bar). Drive effi ciency. Quiet operation. Easy maintenance. DIMENSION cm. Length Width Height Cooling apart, WIS water cooled share the same dimensions and technology as air cooled WIS. Generously sized water-water cooler allows low compressed air temperature, even in maximum ambient conditions, without using any extra water-air cooler: pressure drop is hence minimum and efficiency improved.

4 VARIABLE SPEED MODELS (50-75 HP) WIS is also available in two power sizes. WIS 50V and 75V are direct driven (1:1). The inverter fitted and ventilated in the cubicle adapts the speed of the motor to the air demand. The energy used for compressed air production, is directly linked to your real need. As most of the installations have a fluctuating demand, variable speed solution can bring tremendous energy savings and quick payback. Soft Start up. No current peaks, no mechanical stress. Share same service components as fix speed. Constant pressure. Up to 30% energy savings. Electrical Consumption 50% Investment 17% Maintenance 9% Installation 2% Savings 22%

5 INTEGRATED DRYER OPTION Any WIS compressor of the range, can be fitted with an integrated dryer for an optimal air treatment solution: Easy installation on the work place. Space saving. Appropriate dryer dimensioning. Low dew point (3 C at reference conditions). Low power consumption and low pressure drop. Optimized connection to the compressor.

6 TECHNICAL DATA Type kg FIX SPEED DIRECT DRIVEN WIS 40 WIS 50 WIS 60 WIS 75 VARIABLE SPEED DIRECT DRIVEN WIS 50 V WIS 75 V Water cooled Air cooled With dryer bar psi HP kw m 3 /1 m 3 /h cfm db (A) kg/kg with dryer m 3 /1 m 3 /h cfm db (A) kg/kg with dryer gas 4,5 7, ,5 7, ,100 4,100 3,183 6,117 5,183 4,150 7,283 5,883 4,933 8,350 7,083 5,900 2,7-6, 2,52-6,48 3,12-5,52 3,9-4,44 2,71-9,79 2,51-9,65 3,11-8, ,1 144,8 112,4 216,0 183,0 146,6 257,2 207,8 174,2 294,9 250,1 208,4 95,4-235, ,8 110,2-194,9 137,7-156,8 95,6-345,8 88,8-340,9 110,0-301, / / / / / / ,92-7, ,4-247,9 Unit performance measured according to ISO 1217, Ed.3, Annex C Mean noise level measured according to ISO 2151/Pneurop/Cagi PN8NTC2 test code; tolerance 3 db(a). 5,317 4,267 3,300 6,433 5,467 4,367 7,717 6,483 5,400 9,167 7,867 6,533 2,76-6,48 2,52-6,24 3,06-5,34 3,-4,26 2,73-9,61 2,54-9,29 3,10-8,11 3,64-6, ,8 150,7 116,5 227,2 193,1 154,2 2,5 229,0 190,7 323,7 277,8 230,7 97,5-288, ,4 108,1-188,6 131,4-150,4 96,4-339,4 89,6-328,2 109,5-286,5 128,4-231, / / / / / / TECHNE