Heating with wood pellets kw

Transcription

1 Heating with wood pellets 0-60 kw

2 Competence is our success... HERZ FACTS: 60 companies Group headquarter in Austria Research & development in Austria Austrian owner employees in over 00 countries 24 production sites HERZ Armaturen GmbH - The company Founded in 896, HERZ has been continuously active in the market for more than 20 years. With 8 sites within Austria, another 6 in Europe and more than employees at home and abroad, HERZ is the only Austrian manufacturer that produces equipment for the entire heating and installation industry and is one of the most important internationally. GEMÄSS EN 303-5:202 HÖCHSTE KESSELKLASSE HIGHEST BOILER CLASS ACCORDING TO EN 303-5:202 HERZ Energietechnik GmbH HERZ Energietechnik employs more than 230 staff in production and sales. At the company sites in Pinkafeld/Burgenland and Sebersdorf/Styria, there is state-of-the-art production as well as a research institute for new, innovative products. As a result, proven cooperations with research and educational institutions can be intensified. Over the years, HERZ has established itself as a specialist in renewable energy systems. HERZ places a great importance on modern, cost-effective and environmentally friendly heating systems with the highest level of convenience and user-friendliness. HERZ for the environment All HERZ biomass systems fall below the strictest emission regulations. Numerous environmental endorsements bear witness to this. HERZ quality Our HERZ design engineers are in permanent contact with acknowledged research institutions in order to improve the very high standards continuously. 2

3 Convenient heating... Decades of experience Internal development and test centre Austrian quality with world-wide sales Comprehensive service ISO 900 certification FMEA approved boiler production The great advantages of HERZ pelletstar: Highest efficiency Automatic heating operation Full automatic heat exchanger cleaning Full automatic combustion grate cleaning, thereby highest comfort is given Infinitely variable control Optimum operation safety Efficient heat insulation Smallest dimensions and thus little space is required Automatic pellet discharge with different systems Wood pellets according to EN ISO : Property class A ENplus, ÖNORM M735, DINplus or Swisspellet 3

4 Easy, modern and comfortable with the... With the user-friendly VGA color touch-screen controller, the burning-process, as well as heating circuits, a hot water tank, buffer tank and a solar system can be controlled. A central control unit for: Buffer management Back flow elevation (pump and mixer valve) Domestic hot water preparation Controlled heating circuits (pump and mixer valve) Solar circuit control Frost protection The convenient menu and simple screen layout with schematic 3D-representation ensures maximum user-friendliness. The modular operation of the T-CONTROL offers extension possibilities up to 55 modules. As a result, the central control unit can optimally coordinate the processes of the combustion control (lambda probe control), buffer management, back flow elevation, heating circuit, hot water preparation, solar and more. 4

5 ... central control unit T-CONTROL Remote access to the control via the myherz-portal As an additional option, the T-CONTROL offers the possibility for remote visualization and remote maintenance via smartphone, PC or tablet PC. The handling is the same as in the Touch-Control directly on the boiler. The processes and parameters can be read and modified any time from anywhere. Further advantages of the T-CONTROL: power-saving standby mode status and error messages via data transfer and software updates via USB stick possibility of Modbus-communication easy and clear presentation of the functions from various components (heating circuit pump, hot water tank loading pump, circulation pump, mixing valve, switching valve, actuator motors etc.) Cascade switching With the HERZ T-CONTROL up to 8 boilers can be switched in cascade. That means, several boilers are merged in order to achieve a higher performance. A special advantage of the cascade arrangement is the efficient utilization of the boiler at lower heat consumption (eg in the transitional period). 5

6 Benefits and details... T-CONTROL - the user-friendly control with touch display Central control unit as standard for: Buffer management Back flow elevation (pump and mixer valve) Domestic hot water preparation Controlled heating circuit (pump and mixer valve) Frost protection Simple screen design and convenient menu guide. Extension modules up to 55 modules possible (heating circuits, solar-use, second buffer etc.) 2 Made of high heat-resistant steel - for longest lifetime High heat resistant stainless steelcombustion chamber Automatic cleaning via tipping grate. T-CONTROL central control unit Complete cleaning of the grate due to automatical tipping on a cleaning device. No manual cleaning requirement. Due to the clean combustion grate an optimum air supply is guaranteed. The ash from the combustion chamber is dropped into the large ash bin below. The HERZ pelletstar is depending on the fuel quality several weeks maintenance-free. 2. High heat resistant stainless steel combustion chamber 3. Automatic tipping grate for complete cleaning 6

7 ...of the HERZ pelletstar 0-60 Energy saving combustion due to the lambda probe 9 8 A built in lambda probe, which monitors continuously the fl ue gas values, detects fuel quality changes and ensures optimum combustion and low emission values. The lambda probe controls the air supply and ensures a complete combustion, even in part load operation. The results are low fuel consumption and lower emission values even with different fuel qualities. 0 7 Automatic cleaning of the heat exchanger 6 The heat exchanger surfaces are automatically cleaned via the integrated turbulators, even during heating operation and therefore no manual cleaning is necessary. A consistently high level of effi ciency by purifi ed heat exchanger surfaces means low fuel consumption. The integrated, extractable ash boxes allow an easy ash disposal. 4. Automatic ignition via hot air fan 5. Ash-bins for combustion and fly-ash are easy accessible from the front, easy to handle 6. Certified back fire protection flap (BFP) 7. Pipe heat exchanger with turbulators and automatic cleaning 8. Lambda probe control Automatic fl ue gas and combustion monitoring 9. ID fan speed controlled and monitored for the highest operating safety 0. Efficient heat insulation for the lowest radiation losses 7

8 Full automatic pellets discharge systems HERZ offers a variety of solutions to store the wood pellets and to discharge the fuel via various systems to the boiler. Whether a room discharge with fl exible screw, suction system, agitator or with a rigid pellet screw: Due to the wide range of discharge variants HERZ has the optimal solution for each room and space situation. If there is no pellet storage room available, there is also the possibility of an underground tank outside of the building or a bag silo, which can be placed for example, directly in the boiler room. Discharge via fl exible screw The room discharge with a fl exible screw is an easy and energy saving solution to empty the storage room in an effi cient way Filling nozzle The pellets are blown via a fi lling nozzle into the storage room. At least fi lling nozzle and suction nozzle are required because parallel to the blowing operation the produced dust and the necessary conveying air are sucked away. 2. Impact mat An impact mat serves to protect the pellets during the blow in and is mounted opposite of the fi lling nozzle. 3. Slide ramps In order to empty the storage room completely a sloping fl oor is recommended. 4. Flexible screw The fl exible discharge screw consists of a screw spiral which gently transports the pellets to the boiler. 5. Screw system in the storage room Screw pipe end piece The big advantages Inexpensive to buy and during operation Extremely quiet operation Gentle transport of the pellets Wall duct piece Pellets stirrer Pressure release 5 8

9 Discharge via flexible screw - chute pipe system 2 The storage room is located one floor higher than the boiler room or in the attic? This is no problem with the flexible screw discharge with chute pipe system! 3. Filling nozzles 2. Impact mat 3. Slide ramps 4. Flexible screw 5. Chute pipe 4 5 Chute pipe system direct The pellets are transported via the chute pipe directly to the boiler. Chute pipe system with transfer The pellets are transported after the chute pipe via a transfer station with an additional flexible screw to the boiler. This results in even more flexibility and the system can be optimally adapted to the local conditions. 9

10 Full automatic pellets discharge systems Discharge via flexible screw - transfer system Room discharge with flexible screw and transfer hopper (with 2 flexible screws): even more flexible and suitable for longer distances. Filling nozzles 2. Impact mat 3. Slide ramps 4. Transfer hopper 5. Flexible screw Transfer system fixed: The transfer unit is located immediately after the storage room. Transfer system: The pellets are transported after the storage room via 2 flexible screws with intermediate transfer unit to the boiler. Thereby longer distances can be realized. 0

11 Discharge via agitator & rigid screw Efficient storage room utilization with an agitator For an efficient utilization of the storage room without slide ramps the system with spring arm agitator is recommended Filling nozzles 2. Impact mat 3. Agitator system Discharge via rigid pellets screw The pellets are transported via a rigid pellets screw directly to the boiler.

12 Full automatic pellets discharge systems Discharge via suction system The suction systems of HERZ are the ideal solution for longer distances from the storage room to the boiler. Modular discharge screw in the storage room in combination with suction system: Optimum emptying of the storage room and individual positioning of the boiler. The big advantages Clean and dust-free pellets transport also for long distances from storage room to boiler room. Flexible, individual installation and guidance of the suction and reverse air tube (depending on local conditions) Filling nozzle The pellets are blown via a filling nozzle into the storage room. At least filling nozzle and suction nozzle are required because parallel to the blowing operation the produced dust and the necessary conveying air are sucked away. 2. Impact mat An impact mat serves to protect the pellets during the blow in and is mounted opposite of the filling nozzle Slide ramps In order to empty the storage room completely a sloping floor is recommended. 4. Modular screw discharge The transport of pellets from the storage room is done via a modular screw discharge. 5. Suction- and reverse air tube The suction- and reverse air tubes can be installed flexible and individually adapted to the local conditions. Thereby long distances between the storage room and the boiler room can be realized. 6. Suction hopper incl. suction turbine The suction hopper with the integrated suction turbine is available in 3 sizes and can be positioned flexible next to the boiler (Details see page 6).

13 Discharge via suction system Modular screw in combination with suction system The screw system in the storage room is modular, that means the system consists of elements which can be combined according to the room situation or the room size. Rigid screw in combination with suction system The transport of the pellets is done via a rigid pellets screw. max. length: 4 m max. length: 8 m 4-point suction system The position of the 4 suction points is individually selectable. The system can be installed easily and is an adaptable, universal solution to each storage room situation Discharge system with suction probe: ideal for small storage rooms and less pellets demand 4 6. Filling nozzle 2. Impact mat 3. Slide ramps 4. Suction probe 5. Suction and reverse air tube 6. Suction hopper incl. suction turbine Pellets agitator in the storage room in combination with suction system This discharge system is especially suitable for square or round storage rooms and long distances from storage room to boiler room.. Filling nozzle 2. Impact mat 3. Agitator 4. Suction and reverse air tube 5. Suction hopper incl. suction turbine 3

14 Storage systems from HERZ System bag silo Room discharge with flexible screw from a bag silo If no pellet storage room is available, there is the possibility of a bag silo. The bag silo can be placed directly in the boiler room (depending on national regulations). If the bag silo is placed a floor higher the pellets transport is done via a flexible discharge screw with chute pipe system. Suction discharge from a bag silo 4

15 The silo The advantages in detail Easy and fast assembly The bag silo can be installed & assembled easy and fast. If the silo is not on the right place after installation, it can be easily rearranged. Clean The special antistatic polyester fabric prevents that dust escapes from the silo, whereby a clean filling and a dust-free operation is possible. Careful pellet storage The pellets are protected during filling by the integrated impact mat inside of the bag silo. In addition, the silo provides an optimal environment for the careful storage of the fuel. Individual positioning The place of installation of the silo can be selected individually. Due to the variety of the pellets discharge systems HERZ offers for each place and room situation the optimum solution. The HERZ bag silo is available in different sizes with storage capacities from. up to.7 m³. User-friendly The filling level of the pellets is due to the transparent fabric easy to read from the outside. Additionally, the system offers the cost-effective acquisition and full automatic & maintenance-friendly operation. System ground storage If there is not enough space to store the pellets inside the building, there is the possibility of a ground storage outside of the building. The fuel is transported to the boiler via suction system. 5

16 Opportunities & combinations Suction hopper for room discharge via suction system The pelletstar suction hopper (with integrated suction turbine) is available in 3 different sizes. 240 litre C 86 litre 09 litre C4 R A B The suction hopper can be placed variably beside or behind the boiler. Following 2 examples of the possibilities of containerpositioning are shown: P P2 Q Q2 Dimensions hopper (mm) Dimensions boiler with hopper (mm) Type hopper pelletstar Suction hopper 86 litre / 56 kg A Length 440 P / P2 Length 400 / / / 930 B Width 440 Q / Q2 Width 035 / / / 660 C Height 50 R Height C4 Minimum ceiling height Suction hopper 09 litre / 7 kg A Length 440 P / P2 Length 400 / / / / / 220 B Width 440 Q / Q2 Width 035 / / / / / 660 C Height 755 R Height C4 Minimum ceiling height Suction hopper BIG 240 litre / 56 kg A Length 600 P / P2 Length 400 / / / / / 2370 B Width 600 Q / Q 2 Width 95 / / / / / 740 C Height 969 R Height C4 Minimum ceiling height

17 Hopper for manual filling of the pellets If you want to waive the automatic discharge from a storage room, there is the possibility for manual fi lling of the hopper. The hopper for manual fi lling is available in 4 sizes: C 65 litre 95 litre C 400 litre 480 litre A B A B C4 R C4 R P P2 Q Q2 Dimensions hopper (mm) Dimensions boiler with hopper (mm) Type hopper pelletstar Hopper 65 litre / 07 kg A Length 440 P / P2 Length 400 / / / 930 B Width 440 Q / Q2 Width 035 / / / 655 C Height 50 R Height C4 Minimum ceiling height Hopper 95 litre / 27 kg A Length 440 P / P2 Length 400 / / / / / 220 B Width 440 Q / Q2 Width 035 / / / / / 660 C Height 597 R Height C4 Minimum ceiling height Hopper BIG 400 litre / 260 kg A Length 200 P / P2 Length B Width 600 Q / Q2 Width C Height 34 R Height C4 Minimum ceiling height Hopper BIG 480 litre / 30 kg A Length 200 P / P2 Length B Width 600 Q / Q2 Width C Height 369 R Height C4 Minimum ceiling height

18 HERZ domestic hot water module & buffer tank Buffer tank fresh water module ILLUSTRATION OF FUNCTION cold water The HERZ fresh water module is a domestic hot water preparation unit which is working in continuous fl ow mode. The fresh cold water is heaten up via a plate heat exchanger with water from the buffer tank. The fresh water module is characterized by its compact design, low pressure drop, low water content and easily accessible and clearly arranged connections. THE BENEFITS: Domestic hot water hygienic & fresh Easy to install Very compact (low space required) Useful supplementation for your heating system: HERZ buffer tanks In the use of a buffer tank the generation of energy takes place over a longer period. As a result the number of boiler starts is reduced and the effi ciency of the entire system increases. A buffer tank ensures a constant heat supply for different heating circuits (eg underfl oor heating and radiators) and ensures optimum operating conditions. 8

19 Dimensions and technical data pelletstar 0-60 pelletstar 0-60 Subject to technical modifications! Output range Output range kw 3,5-2,0 6, - 20,0 6, - 30,0 3,0-45 3,0-60 Boiler weight kg Degree of efficiency η F % >93 >94 >93 >95 >95 Permissible operating pressure bar 3,0 3,0 3,0 3,0 3,0 Max. permissible operating temperature C Water capacity ltr Flue gas mass flow rate at full load kg/s 0,0085 0,030 0,09 0,026 0,035 Flue gas mass flow rate at part load kg/s 0,003 0,0050 0,0050 0,0094 0,0094 Dimensions (mm) A Length - total A2 Length boiler plus distance to BFP centre line A3 Length - casing A4 Length boiler plus distance to flue pipe centre line B Width C Height C8 Minimum room height D Flue pipe - diameter E Minimum space at the front E2 Minimum space at the back E3 Minimum space left (without hopper) E3* Minimum space left (with hopper) E4 Minimum space right pelletstar 0/20/30: Flow connection Back flow connection pelletstar 45/60: Flow connection 6/4 Back flow connection 6/4 9

20 HERZ customer-oriented... Advice during the planning phase Planning of the plant and discharge system according to customer requirements and local conditions Comprehensive services >00 countries worldwide HERZ trainings: for the plant operators for planners and technical offi ces for installers and assemblers as well as continuous training of the maintenance staff >2600 employees years of >20 experience We reserve the right of errors, misprint, typographical failures and technical modifi cations! Data about our products are not guaranteed characteristics. Mentioned and illustrated discharge systems are system-dependent and only available as an option. In case of discrepancies between documents with regard to the scope of supply the information in the current offer is valid. All images are representations as a symbol and serve only to illustrate our products. Your partner: d HERZ Energietechnik GmbH Herzstraße, 7423 Pinkafeld Österreich/Austria Tel.: +43(0)3357/ Fax: +43(0)3357/ Mail: offi ce-energie@herz.eu Internet: HERZ Armaturen GmbH Fabrikstraße 76, 7522 Backnang Deutschland/Germany Tel.: +49(0)79/902-0 Fax: +49(0)79/ Mail: zentrale-bk@herz.eu Internet: HERZ biomass systems fall below the strictest emission regulations.