Buderus Oil Boilers. Buderus G115 & G215.

Transcription

1 Bders Oil Boilers Bders G115 & G215 Bders residential oil boilers are designed to extract and deliver more heat from every fel dollar, and are available in higher otpts at less cost per BTU.

2 Comfortable, Efficient & Intelligent Heating. Meet the Bders G115 & G215 Keeping yor home comfortable and warm is a high priority bt it doesn t have to come at a high cost. Whether yo heat by baseboard, panel radiators, hydro-air systems or radiant flooring, or advanced heating systems will provide many years of exceptional comfort and savings. A conventional boiler heats and circlates water at only one temperatre typically 170 to 180 F ntil the thermostat signals it to stop. A Bders boiler, especially when paired with the Logamatic control, eliminates these room temperatre swings by adjsting the boiler water temperatre to the crrent conditions, saving fel while keeping yo warm and comfortable. Bders G215 Featres Bders G115 Designed to operate at any retrn water temperatre Fll swing brner door for easy & qick, thorogh cleaning No refractory parts for redced maintenance Boiler flly serviced and cleaned from the front Cast iron breaching for long life Thermostream design increases efficiency & reliability High efficiency throgh fll three-pass boiler design

3 The Three-Pass Boiler Design Optimized combstion with positive pressre-fired boilers and tailored chamber geometry no need for a heat-consming refractory or target wall eliminating the need for costly repairs Minimal stack losses with the modified three-pass fle design s large heat transfer areas Low standby losses with a fll 3½" to 4" jacket of thermal inslation arond the entire block even nderneath the boiler How It Works The flame fires into the first chamber. Then the fle prodcts flow throgh the second pass to the front of the boiler. From there they reverse direction again moving throgh the third pass to the back, and finally exiting via the fle connection into the chimney. Becase the gases are held in the boiler longer this allows the cast iron to absorb the maximm amont of heat, reslting in a lower stack temperatre and a higher efficiency. Ptting Energy To Work Bders developed a fll three-pass system which increases the efficiency of the boilers. With single-pass boilers, the fle prodcts have only one chance to heat the water. Bders three-pass boilers triple this opportnity. The niqe way heat flows throgh the G115 and G215 boilers allows the water to be heated three separate times. The fll 3" thick thermal inslation helps to maintain a higher water temperatre even after the boiler has gone into standby mode.

4 Bders G115 The Bders G115WS boiler is based on the highly sccessfl G115, the world s best selling boiler. The G115WS has been redesigned and reengineered to extract and deliver more heat from every fel dollar, and now has higher otpts at less cost per BTU. Acknowledged as the leader in high-efficiency, low emission hydronic heating, Bders offers innovative design and qality manfactring. A G115WS cast iron oil boiler is ideal for new installations or as a replacement for virtally any make or model of boiler. They are compatible with most hot water tanks. Constrcted with sperior materials and designed by the indstry s leading engineers, the G115WS boiler is raising the standard for the indstry. With two ETL approved venting options, either into a chimney or directly throgh the wall, the G115WS allows a wide range of installation possibilities. Featres Improved Efficiency - 87% AFUE Engineered to extract and deliver more heat from every fel dollar Special componds provide a gas-tight seal for safe and efficient operation Optimized combstion with positive pressre-fired boilers and tailored chamber geometry Minimal stack losses with the modified three-pass fle design s large heat transfer areas Low standby losses with a fll 3" jacket of thermal inslation arond the entire block even nderneath the boiler Model G115WS/3 G115WS/4 G115WS/5 Performance Data Chimney Vent Direct Vent Chimney Vent Direct Vent Chimney Vent Direct Vent Gross Otpt (BTU/Hr) 85,000 74, ,000 98, , ,000 Net IBR (BTU/Hr) 74,000 64,000 95,000 85, , ,000 Firing Rate (GPH) AFUE (%) 87 Nmber of Sections Piping Connections Vent Connection Size 5 Spply, in 1 1/4 Retrn, in 1 Physical Dimensions Overall Boiler Length, in 23 5/8 28 5/8 33 3/8 Boiler Block Length, in 21 1/8 25 3/4 30 1/2 Minimm Boiler Block Width, in 18 Boiler Width, in 23 1/2 Minimm Boiler Height, in 33 1/2 Boiler Height, in 34 1/2 Boiler Feet Spacing, in 10 3/8 16 1/8 20 7/8 Fire Box Depth, in /2 25 1/4 Fire Box Volme (c. ft.) Dry Weight (lbs.) Approx. Water Content (gal.) Recommendended Clearances for Ease of Serviceability Side, in 15 Rear, in 20

5 Bders G215 Bders boiler sections are assembled with beveled, srface profiled psh nipples for long, troble-free watertight operation. Fleways of Bders boilers are sealed gas tight with tonge and groove section design and elastic high temperatre resistant sealing rope. This seal is flly pressed into the groove dring assembly to allow positive pressre operation. A permanent dry door gasket ensres repeated positive sealing off of the fll swing brner door, prodcing a proven gas tight seal. Bders Developed a fll three-pass system which increases the efficiency of the boilers. With single-pass boilers, the fle prodcts have only one chance to heat the water. Bders three-pass boilers triple this opportnity. The niqe way heat flows throgh the G215 boilers allows the water to be heated three separate times. The fll 3" thick thermal inslation helps to maintain a higher water temperatre even after the boiler has gone into standby mode. Featres Improved Efficiency - 86% AFUE 5 models with otpts from 134 MBH to 294 MBH Rear tappings and fle connection to streamline appearance Baffles and clips for adjsting stack temperatres Heavy gage ble enameled jacket for drability and attractiveness Fll swing brner door hinged on either side allowing for easy access Front access plgs permit flshing of the boiler s interior Balances water flow throgh all boiler sections Operates at low retrn water temperatres Model G215/3 G215/4 G215/5 G215/6 G215/7 Performance Data D.O.E Heating Capacity (MBH) Net IBR Rating (MBH) Oil Firing Rate (GPH) AFUE (%) Nmber of Sections Piping Connections Vent Connection Size 6 Spply, in 1 1/2 Retrn, in 1 1/2 Physical Dimensions Overall Boiler Length, in 26 1/ /4 40 1/2 45 1/4 Boiler Block Length, in /4 31 1/2 36 1/4 41 Minimm Boiler Block Width, in 18 Boiler Width, in 23 1/2 Minimm Boiler Height, in 33 1/2 Boiler Height, in 34 1/2 Boiler Feet Spacing, in 13 1/ /4 27 1/4 32 Fire Box Depth, in 163/4 2/12 361/ /4 Fire Box Volme (c. ft.) Dry Weight (lbs.) Approx. Water Content (gal.) Recommendended Clearances for Ease of Serviceability Side, in 15 Rear, in 20

6 Abot Bosch Bosch Grop The Bosch Grop is a leading global spplier of technology and services in the areas of Atomotive, Indstrial Technology, Consmer Goods and Bilding Technology. The company was fonded in Stttgart, Germany, in 1886 and presently has more than 440 sbsidiaries and is represented in over 150 contries. In the U.S., Canada and Mexico, the Bosch Grop manfactres and markets atomotive original eqipment and aftermarket soltions, indstrial drives and control technology, power tools, secrity and commnication systems, packaging technology, thermotechnology, hosehold appliances and software soltions. The Bosch Grop s prodcts and services are designed to improving qality of life by providing innovative and beneficial soltions. In this way, the company offers technology worldwide that is Invented for life. Additional information is available online at boschheatingandcooling.com and bosch.ca. Bosch Thermotechnology in North America Bosch Thermotechnology is a leading sorce of high qality water heating and comfort systems. The company offers gas tankless, electric whole hose and point-of-se water heaters, Bosch and Bders floor-standing and wall monted boilers, Bosch and FHP geothermal, water-sorce and air-sorce systems as well as controls and accessories for all prodct lines. Bosch Thermotechnology is committed to being Simply Smart by offering prodcts that work together as integrated systems that enhance qality of life in an ltra-efficient and environmentally friendly manner. For more information, visit boschheatingandcooling.com. Bosch Water-Sorce Heat Pmps: Made in the U.S.A. Bosch and FHP water-sorce and geothermal heat pmps are made by highly trained and skilled workers in or factory based in Fort Laderdale, Florida. They are manfactred with rigoros standards and factory testing ensring high efficient operation over the life of the nit. Bosch s ISO 9001 and ISO certified facilities provide consistent qality in every nit bilt. Bosch Thermotechnology Corp. Watertown, MA Londonderry, NH Ft. Laderdale, FL General Inqiries: Heating Cooling Hot Water Controls Copyright 2018 Bosch Thermotechnology Corp. All rights reserved. Sbject to change withot notice. 75H991838A 7-18