In addition, all of out customers can rely on the support of our own technical service, in a modern,

Size: px

Start display at page:

Download "In addition, all of out customers can rely on the support of our own technical service, in a modern,"

Frank Eaton
5 years ago
Views:

VERTISA Environmental Technologies develops complete sterilization related solutions for hospitals, laboratories, research centres and medical industries in general.

rubber vulcanizing, wood treating and many other applications.

2 VERTISA Environmental Technologies develops complete sterilization related solutions for hospitals, laboratories, research centres and medical industries in general. We are a full service company providing autoclave, system, waste shredders, steam boilers for technical industries such as infectious medical waste treatment, aerospace composites, glass lamination, rubber vulcanizing, wood treating and many other applications. VERTISA Environmental Technologies is global provider to the hospital sector, offering solutions for all hospital departments, sterilization centres, surgical areas and medical sterilization area. could only be developed by a sterilization expert. In addition, all of out customers can rely on the support of our own technical service, in a modern, operation of the equipments. and our products are produced according to PED (97/23/EEC) ad EN 285 directives. Our brand PROMED and AXL systems are is the most widely used solution for the sterilization and decreasing of volume of waste originating from public health establishments. medical waste disposal and has been designed by Research and Development department engineers using ground breaking new features developed by the well accepted sterilizers experts. Our company developed two different approaches for medical waste sterilizations and divided it into two different product lines:

3 (Compact) (20 Kg/h) (35 Kg/h) (55 Kg/h) (100 Kg/h) (150 Kg/h) (250 Kg/h) (450 Kg/h) (75 Kg/h) (150 Kg/h) (300 Kg/h) (500 Kg/h) (1000 Kg/h)

complete air tight pressure vessel that does not open until sterilization is achieved.

automatically by the control and supervision of the specially programmed PLC unit.

well as complex medical waste treatment facilities. RELIABILITY The equipment may be used safely.

INTEGRATED SHREDDER The main part of the system is the shredder unit.

4 complete air tight pressure vessel that does not open until sterilization is achieved. This solution requires minimum intervention by the operator as the complete cycle carried out automatically by the control and supervision of the specially programmed PLC unit. This way steam The Pre-Shredding equipment can be used indoors in hospitals or laboratories as well as complex medical waste treatment facilities. RELIABILITY The equipment may be used safely. Special trained operators are not required and only 8 hours operator training is enough for complete operation.all in all the operation is fully automatic and is equipped with such safety systems, that eliminates all manual operation. Several safety precautions are implemented by the PLC control unit. INTEGRATED SHREDDER The main part of the system is the shredder unit. Our special solution consists of a double shaft mechanism, which has a PLC controlled motion, that changes rotating direction in case the shaft meets a certain amount of resistance.the shredder is designed and manufactured to withstand the high loads while shredding very hard materials like surgical stainless steel instruments and hard ceramics.

PRE-SHREDDING CYCLE STAGES 1 2 3 4 5 1. LOADING: At the beginning of the cycle, once the upper lid opens, the automatic elevator empties the waste in the loading chamber.

Our special design shredder is capable of grinding very hard material like surgical stainless steel instruments and hard ceramics.

HEATING AND STERILIZATION: Heating is achieved by injecting saturated steam until the homogeneous temperature in the upper and lower chamber reaches 134 C (274 F).

5 PRE-SHREDDING CYCLE STAGES LOADING: At the beginning of the cycle, once the upper lid opens, the automatic elevator empties the waste in the loading chamber. As the upper closes shredding starts. 2. SHREDDING: The shredder, controlled by PLC, changes rotation direction due to the anti blocking capability that prevents the blades to get jammed. Our special design shredder is capable of grinding very hard material like surgical stainless steel instruments and hard ceramics. The mixing device in the upper chamber will provide the continuous feeding of the shredder. 3. HEATING AND STERILIZATION: Heating is achieved by injecting saturated steam until the homogeneous temperature in the upper and lower chamber reaches 134 C (274 F). Sterilization is reached by maintaining 134 C (274 F) C (280 F) temperature equivalent pressure for a period of 10 to 15 minutes. These factors provide the possibility to decrease the pathogenic contamination level in the medical waste by 8 Log 10 value. 4. COOLING AND DRAINING OF CONDENSED WATER: Excess steam in the chamber is removed during cooling phase and the temperature of the grinded sterilized waste is lowered to by injecting bold air in the chamber of the autoclave. The condensed water, that sterile and can be safely discharged into sewage system is drained with the help of positive pressure of vacuum (Patent Pending System). 5. UNLOADING: Once the unloading lid opens and a container is placed below the chamber, the waste trap opens to discharge the sterilized material. As the container is pulled away, the lower lid closes and the sterilizer automatically starts the next cycle. TECHNICAL SPECIFICATIONS TECHNICAL FEATURES P 2000 P 1000 PROMED 500 PROMED 300 PROMED 150 PROMED 100 PROMED 50 -Size ( L x W x H ) (mm) 3000 x 3000 x x 2500 x x 2250 x x 2000 x x 1300 x x 1300 x x 1300 x1600 -Weight - Emty (kg) Air Pressure (bar max) Electrical connec on required 35 KW 20 KW 19 KW 15 KW 10 KW 9 KW 7 KW WORKING CHARACTERISTICS - -Sterilizing Capacity (Kg/ Hour) Process Volume Capacity (Lt.) Average Waste Density (Kg/m3) Average Cycle Time (Min.) Maximum Steam Flow (Kg/Hour) Steriliza E ciency (SAL) 8 Log 10 8 Log 10 8 Log 10 8 Log 10 8 Log 10 8 Log 10 8 Log 10 CONSUMPTION /CYCLE - -Steam (Kg) Electricity (Kw/Hour) Water (Lt.) none none none none none none none -Special Consumables none none none none none none none

OPERATING PRINCIPLES Medical waste collected in buns or plastic bags are in transfered into stainless steel autoclave carts.

The autoclave is heated up with steam to 138 C and 3,8 bar atmospheric pressure.

The process is repeated until 8 lof 10 is vacuumed and dried by our uniquely developed air cooling system, then removed from the autoclave.

The system is very easy to operate, can be managed by one operator that passed the 8 hour training programme.

6 OPERATING PRINCIPLES Medical waste collected in buns or plastic bags are in transfered into stainless steel autoclave carts. The carts are pushed into the autoclave where a repeated pre-vacuum and pre-heating process ensures that all air is removed from the waste. The autoclave is heated up with steam to 138 C and 3,8 bar atmospheric pressure. Sterilization is done by keeping the waste for a given time (10-15 mins) under the above conditions. The process is repeated until 8 lof 10 is vacuumed and dried by our uniquely developed air cooling system, then removed from the autoclave. All parameters can be programmed according to customer needs. The system is very easy to operate, can be managed by one operator that passed the 8 hour training programme. PROMED sterilization system are manufactured completely from stainless steel and can withstand up to 10 BAR atmospheric pressure. Estimated life cycle: 10 years if used 24 Hours/Day The control device is a full automatic PLC unit that controls the whole system including the shredder unit and steam boiler unit (Optional) VSB SERIES Steam Boilers are also manufactured by our company.

POST-SHREDDING PL TECHNICAL FEATURES 1000 A 500 A 300 A 150 A 75 A TECHNICAL SPECIFICATIONS

Pressure (bar max) -Electrical connec on required 6000 x 2500 x 2500 5500 x 2250 x 2250 3000

5 5 5 -Air Pressure (bar max) 8 8 8 8 8 WORKING CHARACTERISTICS 35 KW (Shredder incl.

only) 3500 (net vol. only) 2000 (net vol.only) 870 (net vol. only) 400 (net vol.

7 POST-SHREDDING PL TECHNICAL FEATURES 1000 A 500 A 300 A 150 A 75 A TECHNICAL SPECIFICATIONS -Size ( L x W x H ) (mm) -Weight - Emty (kg) -Weight - Filled with water (kg) -Steam Pressure (bar max) -Electrical connec on required 6000 x 2500 x x 2250 x x 2000 x x 1500 x x 1500 x NA NA NA NA Air Pressure (bar max) WORKING CHARACTERISTICS 35 KW (Shredder incl.) 33 KW (Shredder incl.) 19 KW (Shredder incl.) 17 KW (Shredder incl.) 17 KW (Shredder incl.) Sterilizing Capacity Kg/ Hour Capacity - Volume (Lt.) 7500 (net vol. only) 3500 (net vol. only) 2000 (net vol.only) 870 (net vol. only) 400 (net vol. only) -Average Waste Density kg/m Average Cycle Time (Min.) Maximum Steam Flow (Kg/Hour) Steriliza on E iency (SAL) 8 Log 10 8 Log 10 8 Log 10 8 Log 10 8 Log CONSUMPTION/CYCLE -Steam (kg) -Electricity (Kw) Water (Lt.) None None None None None -Steam RECYCLING UNIT used (kg) NA

8 1 Cold Chamber (4 C) 2 Transport 3 Container Weight 4 Autoclave Filling 5 Automated Container Lift 6 Container Waste Transfer to the Autoclave 7 Control Panel Touch Screen 8 Cycle Parameters View 9 Container Unloading 10 Treated Waste Residues Appearance 11 Waste Load Weight

9 FACILITIES DESIGNED AND BUILT BY MEDICAL WASTE STERILIZATION AND TREATMENT FACILITY

10 COMPACT & MODULAR SYSTEMS

12 CONTACT INFO 3956 TOWN CENTER BLVD. STE ORLANDO, FL 32837, USA

AZTECA A LITRE STERILISER

AZTECA A LITRE STERILISER Product Description Azteca A-6615 is a fully automatic high-speed pre & post vacuum steam sterilizer. This model is an electrically heated sterilizer, which operates with saturated steam as a sterilizing