Product Specifications NEW OPTION AVAILABLE: AUTOSPEED 24V CONTROL PACKAGE

Transcription

1 NOW AVAILABLE WITH AUTOSPEED V CONTROL Product Specifications MB Series MBE Series W Series Vertical / Horizontal Direct Drive Hydronic Fan Coils 00 0 CFM NEW OPTION AVAILABLE: AUTOSPEED V CONTROL PACKAGE (With V, Automatic speed fan selection) MB Series (pipe, cooling and heating) (replaces the MH Series) W Series (pipe, cooling and heating) (replaces the MHHW Series) MBE Series (pipe, cooling with electric heat) (replaces the MHE Series) FIRST CO. P.O. Box 7099 Dallas, Texas 77 Ph. (1) 71 Fax (1)

2 Table of contents DESCRIPTION PAGE General Construction Features... Model Number Nomenclature... MB Series ing / Heating (pipe)... W Series ing / Heating (pipe)... MBE Series ing / Electric Heat... ing Capacities (all models)... 7 Valves... 7 WAY AIRFLOW (MB, MBE, W)

3 General Construction Features Basic Unit All models are manufactured with heavy gauge galvanized steel to resist corrosion. Each cabinet is fully insulated. Coil connections are stubbed out the cabinet for easier installation. Coils Coils have / inch copper tubing expanded to high efficiency aluminum fins. Manual air vents are provided and all coils are pressure tested to 0 psig. Drain Pans All fan coils can be installed vertically or horizontally (righttoleft airflow) with no modification. Horizontal drain pans can be repositioned within the cabinet to allow horizontal installation with lefttoright airflow. Each drain pan is coated with a mastic material to reduce corrosion. Threaded primary and secondary drain connections are also provided. Motors Standard motors are PSC type with internal thermal overload protection and are mounted with rubber isolation bushings. Blower wheels are centrifugal, forward curved, and dynamically balanced. Filters One inch throw away filters are factory installed. Agency Listing All standard models are ETL Listed. Additional Features Optional Autospeed V control: (see P.) The MB and W models are available with an optional V speed control board and a V speed digital wall thermostat. This option, called the Autospeed V, provides maximum comfort and efficiency by automatically selecting the appropriate, ium, or fan speed, depending on room temperature and thermostat temperature setting. MB Series The MB Series pipe fan coil comes with a row cooling / heating coil and a V multispeed motor. No controls are furnished. MBE Series (0V) The MBE Series pipe fan coil comes with a row cooling coil, 0V multispeed motor, 0/ transformer, and up to kw of factory installed electric heat. Models with more than kw also include a circuit breaker for branch circuit protection. Control voltage is V. MBE Series (77V) This fan coil comes with a row cooling coil, 77V multispeed motor, and up to kw of factory installed electric heat. All models are ETL Listed. W Series The W Series pipe fan coil includes a row cooling coil, a,, or row heating coil installed in the reheat position, and a V multispeed motor. No controls are furnished. Model Number Nomenclature NOM. CFM (0 s) 00 CFM 00 CFM (pipe only) 1 CFM 1 CFM CFM 1 MB E1 Basic Unit Options E # E designates electric heat # is kw of electric heat HW row hot water coil HW row hot water coil HW row hot water coil Basic Unit In keeping with its policy of continuous progress and product improvement, First Operations reserves the right to make changes without notice. Maintenance for all First Co. products is available under Product Maintenance at www. firstco.com.

4 MB Series ing / Heating (pipe) PHYSICAL DIMENSIONS A B C D E F G H COIL CONNECTIONS FILTER SIZE SHIP WT. (LBS) MB / / SWEAT 1 X 0 X MB 0 11/ / SWEAT 0 X X 1 1/0MB 11/ 1/ 171/ 191/ 1 11/ SWEAT 0 X X 1 NOTE: See Page 7 for cooling capacities and hand/motorized valves In keeping with its policy of continuous progress and product improvement, First Operations reserves the right to make changes without notice. Maintenance for all First Co. products is available under Product Maintenance at www. firstco.com. HEATING DATA o F EWT, 70 o F EAT MB 1MB 1MB 0MB CFM GPM P.D. (FT. WTR.) HEAT BTUH (00) LVG AIR of LVG WTR o F BLOWER DATA Features: 1. row cooling / heating coil. V multispeed motor. Vertical / Horizontal drain pan (righttoleft and leftto right airflow). Manual air vent. Throw away filter NOM. COOL TONS HPAMP (V) MB 1/.0 1MB 1/ 1MB 1/ 0MB /. SPEED Hi Hi CFM vs. EXTERNAL STATIC PRESSURE NOTE: Discharge air temperature must not exceed degrees.

5 W Series ing / Heating (pipe) Features: 1. Separate co oling and heating coils ( row cooling coil). V multispeed motor. Vertical / Horizontal drain pan (righttoleft and lefttoright airflow). Manual air vent. Throw away filter HOT WATER COIL PERFORMANCE DATA W W W 1W 1W 0W CFM GPM P.D. (FT. WTR.) HEATING BTUH (00) AT ENTERING WATER TEMPERATURE (1) o F o F o F (1) Contact factory for capacities at other conditions. PHYSICAL DIMENSIONS A B C D E F G H NOTE: See Page 7 for cooling capacities and accessories FILTER SIZE In keeping with its policy of continuous progress and product improvement, First Operations reserves the right to make changes without notice. Maintenance for all First Co. products is available under Product Maintenance at www. firstco.com. SHIP WT. (LBS) W / X 0 X 1 /1W 0 11/ X X 1 1 1W 11/ 1/ 171/ X X 1 0W 1/ 1/ 11/ BLOWER DATA NOM. COOL TONS HPAMP (V) W 1/ W. 1/ 1W 1/ 1W /. 0W 1. SPEED 1 X X 1 ( required) CFM vs. EXTERNAL STATIC PRESSURE

6 MBE Series ing / Electric Heat PHYSICAL DIMENSIONS A B C D E F G H COIL CONNECTIONS FILTER SIZE SHIP WT. (LBS) MBE / / SWEAT 1 X 0 X MBE 0 11/ / SWEAT 0 X X 1 1/0MBE 11/ 1/ 171/ 191/ 1 11/ SWEAT 0 X X 1 BLOWER DATA NOM. COOL TONS HPAMP (V) SPEED DUTY CFM vs. EXTERNAL STATIC PRESSURE MBE 1/.0 Heat MBE 1/. Heat MBE 1/. Heat MBE /.0 Heat NOTE: 1MBE is factory wired on high speed for cooling. ELECTRICAL DATA (0 / 0V) MBE 1MBE 1MBE 0MBE (1) 1 (1) 1 (1) 0 (1) (1) 1 (1) 0 (1) ELECTRIC HEAT CAPACITY kw BTUH AMPS (1) 1kW and 0kW models require supply circuits. kw models require supply circuits. NOTES: Units suitable for installation with 0 clearance to combustible material. MIN. CIR. AMPACITY MAX. FUSE OR HACR BREAKER 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V ,00 1,00 0,00 7,00,0 7,00,0 1,0 7,00,0 1,0,00,0 7,00 1,0 1,0,00,00 7,700,00 1,000 1,00 0,00,00 1,000 0,00,00,00 1,000 0,00,00,00 1,0,900 1,000 0,00,00,00 1,0, NOTE: See Page 7 for cooling capacities and accessories In keeping with its policy of continuous progress and product improvement, First Operations reserves the right to make changes without notice. Maintenance for all First Co. products is available under Product Maintenance at www. firstco.com Features: 1. Factory installed electric heat. row cooling coil. 0/0V motor. 0/V transformer. Circuit breaker disconnect (above kw) (Except 77V). Manual air vent 7. Throw away filter. Vertical / horizontal drain pan (righttoleft and lefttoright airflow) V models available (kw max) (See below) ELECTRICAL DATA (77V) MBE 1MBE 1MBE 0MBE ELECTRIC HEAT CAPACITY kw HP BTUH / 1/ 1/ /,00 0,00 7,00,0 7,00,0 7,00,0 7,00,0 AMPS MIN. CIR. AMPACITY MAX. FUSE OR HACR BREAKER

7 CHILLED WATER COOLING CAPACITY ROW (MB, W, MBE SERIES) MB /1MB 1MB 0MB CFM GPM P.D. (FT. WTR.) o DB/7 o F WB ENT. AIR SENS NOTE: 1. All cooling coils have four rows.. Contact factory for capacities at other conditions. o ENTERING WATER o ENTERING WATER TEMP. RISE o DB/ o F WB ENT. AIR SENS TEMP. RISE o DB/7 o F WB ENT. AIR SENS TEMP. RISE o DB/ o F WB ENT. AIR SENS TEMP. RISE E011 E01 E017 E01 E117 E117 E117 E117 CP90 CP90 NOTE: 1. Power head leads are 1. ACCESSORIES: (field installed) MB, W, MBE Series Power Heads: (two power heads required for pipe) For all units V 1V/0Hz V/0Hz 77V 0V/0Hz 0/0Hz Seperate Valve Bodies: (order power heads seperately) / way For (PHYB, 1MB/MBE/W (and 1W htg.coil) / way For (PHYB, 1MB/MBE/W (and 1W htg.coil) 1 way For 1 0MB/MBE/W (and 0W htg. coil) 1 way For 1 0MB/MBE/W (and 0W htg. coil) Hand Valves: (Combination balance / shutoff) ( usually req d per coil) / For 1MB/MBE/W )1W Htg. coil) 1 For 10MB/MBE/W (1 and 0W Htg. coil) Relay Transformer E01 / V for ALL V motors Power Head CP90 E01 7 Valve Body (way)

8 The "Autospeed V TM " Thermostats (Part #'s T00/T01) AUTOMATIC FAN SPEED CONTROL Accurate, Efficient, and Quiet Fan Coil Operation The new Autospeed V thermostat (part's # T00 and T01) provides V AC single stage temperature control of pipe and pipe fan coil applications. The T00/T01 thermostat offers maximum comfort and efficiency by automatically selecting the appropriate, ium, or fan speed, depending on room temperature and thermostat temperature setting. This automatic fan speed control not only brings the room temperature to the desired set point quickly, it maintains the room temperature with the most efficient fan speed selection. Once the desired room temperature is achieved the fan coil operates on low speed for extremely quiet operation. The fan coil control board (which is factory installed in all CW units) is a circuit board that provides control of a speed line voltage fan motor. The control board allows the thermostat to control the fan motor even though, by itself, the thermostat does not have the amperage capability nor the voltage rating capability to control the fan motor. (T00 shown with wall plate) T00/T01 Thermostat Features Compatible with pipe and pipe fan coils: Series HBC/PHBC/RHBC/CHBC, MB/W, HYB/PHYB, and CW/CHHW/ CWE Cycle fan or continuous fan operation T00Manual Heat / changeover switch T01Automatic Heat / changeover switch Large LED digital display Allows less expensive V control wiring from the fan coil to the thermostat, rather than larger, more expensive line voltage wiring. speed fan operation, with speed indicator lights Fan speed determination: If room temperature is degrees (F.) off thermostat set point, fan will operate on speed. If degrees off set point, fan will operate on ium speed. If within degrees of set point, fan will operate on speed. Catalog No. MB09 (Replaces No. MB0) One or hour Auto override Fan speed defaults to Auto mode after 1 hour if the user manually changes it to a particular fan speed. Temperature set range: degrees F. Adjustable high and low temperature set points Selectable Fahrenheit / Centigrade display Power switch turns system off/on Requires 7wire V thermostat wire No batteries required Set points are permanently retained in memory in case of power interruption Simple operation Mercury Free Wall plate included DISPLAY CODES DISPLAY STEADY FLASHING P1 Auto fan timer 1 hour (default) Auto fan timer hour P Continuous fan (default) Cycled fan P o F (default) P Cycled fan standard Cycled fan overdrive (default) P temo limit o F (default) temp limit 7 o F P Hi temp limit o F (default) Hi temp limit o F o C