High spin. Maximum efficiency, energy saving and environmentally friendly. G FACTOR = 350 / 450 SOFT MOUNTED

Transcription

1 G FACTOR = 350 / 450 SOFT MOUNTED High spin Maximum efficiency, energy saving and environmentally friendly. Especially designed for those laundries where the quality of the process and the energy and water saving are a priority. The new high spin washer extractors offer a top performance and a renovated look to meet the needs of the most demanding customers. Its advanced design and technology, together with its wide range of options and accessories, have an important effect on the energetic efficiency and on water and chemicals saving, reducing its production costs and increasing the business productivity. This type of high spin washer extractors (G-Factor: 350 to 450) drastically reduce the residual moisture after the washing process, thus allowing important savings in the process that follows such as drying and ironing. The simple and quick installation and the minimum space required for its use and maintenance are a key advantage compared to other ranges. The new high spin washer extractors offer models in 11, 14, 18, 25, 35, 45, 60 and 120 kg. FEATURES High spin soft mounted washer extractors, G Factor: 350 to 450 and spinning speeds between 680 and 1245 rpm depending on model. Easy installation, no need of anchoring to the floor and reduced costs. External case, jacket and drum made in stainless steel. Traceability storage of data. OPTIONS Double drain kit allows the recovery of the water, with important savings. Feet (for models 11 to 25 kg). Drain pump kit (11 and 14 kg). Bottom cover for 45, 60 and 120 kg washers and plinth for 11, 14, 18 and 25 kg models. Double heating electric-steam kit. Tilting System both forwards and backwards for an easy loading. unloading in 60 and 120 kg models. Weighing sensor System on feet. 6 extra signals for automatic liquid dosing. Ship voltage: III without neutral - 50 / 60 Hz. Remote controle module for external management. STAINLESS STEEL DESIGN EFFICIENT MIX BALANCE CONTROL TOUCH PLUS CONTROL MULTI- CHOICE INLET AUTO WEIGHT WET CLEANING MAINT. CARE OPTIMIZED DRUM OPTIMAL CONSUMP. 19

2 Laundry Washing Washing Drying Ironing Finishing Accessories Professional laundry Self-service High spin / kg G FACTOR = 450 LA-18 TP E Microprocessor Touch Plus Control with display. 26 pre-set programs (4 economic programs). Possibility of programming, export and import programs through USB memory, without limite. WASH CONTROL management software included. Digital sequence display. 8 signals for automatic liquid dosing, programmable in time and delay. Possibility to install an automatic detergent doser on the rear of the machine. Detergent dispenser with 4 compartments (pre-wash, wash, bleachers and softeners). Water levels completely modifiable. 3 water inlets (Hot water, Cold water, Soft water). Safety switch for door opening. Wash and spin speeds are configurable.. These machines have electronic control of imbalance with frequency variator, that detects the load uncentered before spinning. Standard frequency: Hz. No need to be fixed to the floor. WRAS approved product. Optional version for ETL certified product. Model Code Capacity kg Drum Vol. Door Spin speed Power (*) Dimensions (#) (1:9) (1:10) Ø x Depth litres Ø r.p.m. G kw Volt mm LA-11 TP E x ,25 T 692x788x1.158 LA-11 TP HW x ,75 M 692x788x1.158 LA-11 TP S x ,75 M 692x788x1.158 LA-14 TP E x ,50 T 788x869x1.301 LA-14 TP HW x ,50 M 788x869x1.301 LA-14 TP S x ,50 M 788x869x1.301 LA-18 TP E x ,75 T 884x913x1.409 LA-18 TP HW x ,20 M 884x913x1.409 LA-18 TP S x ,20 M 884x913x1.409 LA-25 TP E x ,00 V 979x1.041x1.548 LA-25 TP HW x ,00 M 979x1.041x1.548 LA-25 TP S x ,00 M 979x1.041x1.548 LA-35 TP E x ,00 X 1.095x1.184x1.598 LA-35 TP HW x ,00 X 1.095x1.184x1.598 LA-35 TP S x ,00 X 1.095x1.184x1.598 (#) : Heating systems for washer extractors kg (*) : Standard Voltages for models kg : E : Electrical heating Heated by heating elements T : Code for 400 V III +N / 230 V III (THREE PHASE) Valid also for 230 V I+N (Single phase) HW : Hot water Washing process with hot water. M : Code for 230 V I+N (SINGLE PHASE) Valid for 400 V III +N / 230 V III (Three-phase) S : Heating by steam in an external generator. Inlet pressure: 4 bar. V : X : Code for 400 V III +N (Three-phase) - Valid also for 230 V III Code for 400 V III +N (Three-phase) - (Optional 230 V III) 20

3 WET CLEANING «WET CLEANING» system incorporated: - Control of temperature - Control of the time - Water levels completely modifiable - Possible manual dosing for every 8 signals - Minimum washing speed: 15 r.p.m. - Minimum rhythm ON-OF: 1 second Options for LA washer extractors / kg Model Code Description KDD Kit double drainage for 14 and 18 kg KDD Kit double drainage for 25 Kg KP Kit feet for LA-11, LA-14, LA-18, LA-25 and LA-35 KBD Kit drain pump for LA-11 and LA-14 KZ Plinth to put the machines at the same level - For 11 kg machines - H=505 mm KZ Plinth to put the machines at the same level - For 14 kg machines - H=363 mm KZ Plinth to put the machines at the same level - For 18 kg machines - H=255 mm KZ Plinth to put the machines at the same level - For 25 kg machines - H=116 mm KH Plinth to align the door at 850 mm - For 11 kg machines KH Plinth to align the door at 850 mm - For 14 kg machines KH Plinth to align the door at 850 mm - For 18 kg machines KH Plinth to align the door at 850 mm - For 25 kg machines KV Kit to transform an E or HW machine (11, 14 or 18 kg) to Steam version KV Kit to transform an E or HW machine 25 kg to Steam version KV Kit to transform an E or HW machine 35 kg to Steam version AUTO WEIGHT Weighing sensor System on feet. Includes RL-6. RL extra signals for automatic liquid dosing. LA WIFI Voltage 230 V /60 Hz for LA-35 REMOTE CONTROLE MODULE FOR EXTERNAL MANAGEMENT Transformation to ship voltage Only for electrical heating. Kit transformation ship voltage V - III - 50/60 Hz Extra price transformation ship voltage for: Washer extractor LA-11 T`P Washer extractor LA-14 T`P Washer extractor LA-18 T`P Washer extractor LA-25 T`P Washer extractor LA-35 T`P 21

4 Laundry Washing Washing Drying Ironing Finishing Accessories Professional laundry Self-service High spin / kg G FACTOR = 350 Microprocessor Touch Plus Control with display. 26 pre-set programs (4 economic programs). Possibility of programming, export and import programs through USB memory, without limite. WASH CONTROL management software included. Digital sequence display. 8 signals for automatic liquid dosing, programmable in time and delay. Possibility to install an automatic detergent doser on the rear of the machine. Detergent dispenser with 5 compartments (pre-wash, wash, bleachers and softeners). Water levels completely modifiable. 3 water inlets (Hot water, Cold water, Soft water). Safety switch for door opening. Wash and spin speeds are configurable.. These machines have electronic control of imbalance with frequency variator, that detects the load uncentered before spinning. Standard frequency: Hz. No need to be fixed to the floor. LA-60 TP E WRAS approved product. Model Code Capacity kg Drum Vol. Door Spin speed Power (*) Dimensions (#) (1:9) (1:10) Ø x Depth litres Ø r.p.m. G kw Volt mm LA-45 TP E x ,30 X 1.478x1.444x1.905 LA-45 TP HW x ,50 X 1.478x1.444x1.905 LA-45 TP S x ,50 X 1.478x1.444x1.905 LA-60 TP E x ,00 X 1.478x1.444x1.905 LA-60 TP HW x ,00 X 1.478x1.444x1.905 LA-60 TP S x ,00 X 1.478x1.444x1.905 LA-120 TP HW X ,00 X 1.836x1.863x2.245 LA-120 TP S X ,00 X 1.836x1.863x2.245 (#) : Heating systems for washer extractors kg: (*) : Standard Voltages for models kg: E : Electrical heating Heated by heating elements X : Code for 400 V III +N (Three-phase) - (Optional 230 V III) HW : Hot water Washing process with hot water. S : Heating by steam in an external generator. Inlet pressure: 4 bar. Transformation to ship voltage Only for electrical heating. Kit transformation ship voltage V - III - 50/60 Hz 22

5 WET CLEANING «WET CLEANING» system incorporated: - Control of temperature - Control of the time - Water levels completely modifiable - Possible manual dosing for every 8 signals - Minimum washing speed: 15 r.p.m. - Minimum rhythm ON-OF: 1 second Options for LA washer extractors kg Model Code Description KDD Kit double drainage for LA-45 MP, LA-60 MP KME Kit water inlet hose 1 for LA-45, LA-60 KV Kit to transform an E or HW machine (45, or 60 kg) to Steam version KEV KB KBF Kit DOUBLE HEATING SYSTEM (Electric + Steam) for electric washer extractors 45 or 60 kg. Reduces 1/3 of the electric power Kit COMPLETE tilting system (REAR and FRONTAL) for LA-60. Includes RL-6. Kit FRONTAL tilting system for LA-60. Includes RL-6. KZ Panel to cover the low space for 45 and 60 kg KDD Kit double drainage for LA-120 KB KBF AUTO WEIGHT Kit COMPLETE tilting system (REAR and FRONTAL) for LA-120. Includes RL-6. Kit FRONTAL tilting system for LA-120. Includes RL-6. Weighing sensor System on feet. Includes RL-6. INCONSISTENT WITH THE VERSIONS KB and KBF RL extra signals for automatic liquid dosing. LA LA LA Voltage 230 V /60 Hz for LA-45 Voltage 230 V /60 Hz for LA-60 Voltage 230 V /60 Hz for LA-120 WIFI REMOTE CONTROLE MODULE FOR EXTERNAL MANAGEMENT KB-120 Tilting System Washer Extractor LA-120 TP - Tilting sequence using KB-120 tilting system Back: loading the clothes Vertical: working Forward: discharge of the clothes 23