HD3D Forced-Air Heater
|
|
- Timothy Ball
- 5 years ago
- Views:
Transcription
1 Installation, Operation and Maintenance Instructions HD3D Forced-Air Heater Corrosion Resistant/Hose Down PF July 207
2 Table of Contents Section Page. Warnings Optional Equipment Package Contents Mounting Instructions Standard L Bracket Installation Wiring Operation Maintenance
3 Warnings Failure to understand and follow these instructions and the WARNING notes therein may result in serious personal injury from electrical shock, or from the heater falling due to faulty installation. This heater is not intended for use in hazardous atmospheres where flammable vapors, gases, liquids or other combustible atmospheres are present as defined in the National Electrical Code. Failure to comply can result in explosion or fire. For these applications see Product Data Sheet PDS CXH-EP (PF305). ELECTRIC SHOCK HAZARD. Any installation involving electric heaters must be performed by a qualified person and must be effectively grounded in accordance with the National Electrical Code to eliminate shock hazard. Do not mount mercury type thermostat directly on unit. Vibration could cause heater to malfunction. Fan blade rotation must be checked. If airflow is not moving out through the louvers, interchange any two of the three customer power leads on three-phase units only. ELECTRIC SHOCK HAZARD. Disconnect all power before installing or servicing heater. Failure to do so could result in personal injury or property damage. Heater must be installed by a qualified person in accordance with the National Electrical Code, NFPA 70. FIRE HAZARD. To prevent personal injury or property damage, do not operate heater near combustible objects, restrict aiflow or use for purposes other than described. Chromalox does not guarantee its products against corrosion. To ensure proper operation and service life, contact your local Chromalox sales office for application assistance. General Information Dimensions HD3D Hose Down Heater Code Heating Element Rating (kw) Code Heating Element Rating (kw) Code Option L Low-Voltage 24V Control PS Epoxy Painted Case T Thermostat S Summer Fan Switch P On Pilot Light D Disconnect Switch M Manual Reset Overtemperature Cutout E Monel Elements HD3D LPSTSPDME Typical Model Number B A C Dimensions in Inches (cm) kw A B C /2 (34) 24-/2 (62) 5 (38) /4 (44) 28 (7) 5-/8 (38) /4 (54) 32-/4 (82) 9-/2 (50) 3
4 Optional Equipment Universal Swivel Bracket - Field installed (See PF929 for installation instructions) Drip Shield - Field installed (See PF927 for installation instructions) Built-in Thermostat - Factory installed (bulb and capillary type) for automatic temperature control. The thermostat controls the heating elements and fan simultaneously to achieve set temperature. The Lo setting of the thermostat is approximately 40 F (4 C) and the Hi setting is approximately 00 F (38 C). Heat-Cool Switch - Factory installed (heater on, heater off, fan only) to permit air flow with or without energizing the heating elements. The switch is accessible from outside the NEMA 4X enclosure. On Pilot Light - Factory installed to indicate when power is on. Internal Fusing - Factory installed Manual Reset Cutout - Factory installed Disconnect Switch - Field/Factory installed See document PF928 for installation instructions For wiring diagram containing options, see label on inside cover of terminal box Package Contents Item Quantity Description A HD3D Unit Heater B 3 Standard Mountng Bracket Aside from mounting brackets, unit heaters with factory installed accessories are shipped fully assembled. A. B. 4
5 Mounting Instructions Heater Location Instructions: Arrange units so their discharge air streams: A. Are subjected to minimum interference from columns, machinery and partitions. B. Wipe exposed walls without blowing directly at them. C. Are directed away from room occupants in comfort heating. D. Are directed along the windward side when installed in a building exposed to a prevailing wind. Locate thermostat on interior partition walls or posts away from cold drafts, internal heat sources and away from heater discharge air streams. Small rooms can be heated by one unit heater. Where two walls are exposed, the heater should be mounted as shown in Figure A. Large rooms require multi-unit installations. Number and capacity of units will be determined by volume of building and square feet of floor area to be heated. Arrange units to provide perimeter air circulation where each unit supports the air stream from another. 9" (23 cm) Min. Ceiling 7 (24 cm) Min. Wall EXPOSED EXPOSED EXPOSED Floor Figure : Horizontal Mounting EXPOSED EXPOSED EXPOSED Ceiling Figure A Minimum Clearances A. The heater must be mounted at least 7 above the floor to avoid accidental contact with the heating elements or fan blade which could cause injury. B. Keep at least 5 clearance in front of the heater. Refer to figures and 2 for side, top and back clearance requirements. C. The ceiling mounting structure and the anchoring provisions must be of sufficient strength to support the combined weight of the heater and mounting bracket. D. The wall or mounting surface, and the anchoring provisions must be capable of supporting the combined weight of the heater and the mounting brackets cantilevered from the mounting surface. 2" (30 cm) Min. 8" (46 cm) Min. 0' (305 cm) Min. Wall Floor Figure 2: Vertical Mounting 5
6 Standard L Bracket Installation. While securing bottom set of lock nuts, completely remove top set. Figure 4 shows typical installation dimensions meeting minimum requirements. Standard Non-Swivel Brackets A Typ Figure 3 2. Install L bracket so that the slot is oriented toward the back (inlet) of the heater and secure using top set of lock nuts. To aviod damaging case, secure bottom set of lock nuts while tightening. Dimensions kw A Radius Inches (cm) Bolt Size Inches (mm) /4 (20) 3/8 to 7/6 (0 to ) /2 (24) 3/8 to 7/6 (0 to ) /2 (29) 3/8 to 7/6 (0 to ) Ceiling Ceiling C 3. Repeat steps and 2 to install remaining two L Brackets. A Wall Wall B D Floor Figure 4 Floor Dimensions in Inches (cm) Notes: Recommended bolt and threaded rod sizes for installation (to be supplied by installer) are located in figure 3. kw A B C D /2 (85) 6-/2 (42) 25-/2 (65) 33 (84) (94) 6-5/8 (42) 29-/4 (78) 33-/8 (84) /4 (05) 2 (53) 33-/4 (84) 37-/2 (80) 6
7 Wiring Instructions Note: All electrical wiring must be done according to National Electrical and local codes by a qualified person. ELECTRIC SHOCK HAZARD. Any installation involving electric heaters must be performed by a qualified person and must be effectively grounded in accordance with the National Electrical Code to eliminate shock hazard. The system designer is responsible for the safety of this equipment and should install adequate back-up controls and safety devices with their electric heating equipment. Where the consequences of failure could result in personal injury or property damage, back-up controls are essential.. Check all factory wiring for loose connections. It is possible for connections to become loose during shipping. 2. Connect heater according to the voltage and frequency specified on the nameplate. 3. Heaters are not provided with a control switch and may be controlled by a wall-mounted thermostat. 4. All units are provided with control and power terminal blocks for customer s connection. 5. Protection against overheating is provided by an internal automatic thermal cutout (manual reset cutout optional) which opens the electric circuit if the normal air-flow is restricted or stopped. Cutout automatically energizes heater on removal of the obstruction. If optional manual reset is tripped, determine cause before re-energizing. 6. Heaters rated 5kW - 39kW are equipped with fan delay control. This control continues fan operation for a short time after elements are de-energized to dissipate residual heat. 7. Follow wiring diagram label located on door inside control panel. Control Panel Layout J E D Letter Description A Thermostat A C F B C D E F Power Contactor Fan Relay Terminal Block Motor Contactor Grounding Lug B G H I Conduit Opening Fan Only Switch Pilot Light I G H J Transformer (Hidden) The Transformer (J) is located below the motor contactor (E), therefore it is not seen in photo. 7
8 C C2 Wiring Diagrams REMOVE JUMPER WHEN THERMOSTAT IS USED M HEATER THRU BULKHEAD T3 LOCATED IN HEATER T3 AUTOMATIC OVERHEAT CUTOUT BUILT IN OR WALL MOUNTED THERMOSTAT C C2 TERMINAL BLOCK (CONTROL) POWER CONTACTOR L T T2 L2 M T T2 RED BUILT IN OR REMOTE THERMOSTAT IN HEATER BLK BRN BLK AR CUTOUT REMOVE JUMPER WHEN THERMOSTAT IS USED TERMINAL BLOCK (CONTROL) L TERMINAL BLOCK L L L L 20V PHASE T3 C THRU BULKHEAD FITTING HD3D-200 & HD3D V Ø X SEC X2 TRANSFORMER 40VA H H2 PRIMARY FOR VOLTAGE SEE HEATER HD3D-200 and HD3D V Ø REFER TO NAMEPLATE FOR XFMR PRIMARY (INPUT) AND SECONDARY (CONTROL) VOLTAGE. PH ELEMENT WIRING T T T2 T2 3PH ELEMENT WIRING M PH ELEMENT WIRING BUILT IN OR REMOTE THERMOSTAT T T T2 T3 T3 T2 2T 6T 4T T T T T2 T2 T2 IN HEATER REMOVE JUMPER WHEN THERMOSTAT IS USED POWER T T2 T3 2T 4T2 6T3 A2 CONTACTOR L L2 L3 L 3L2 5L3 A MOTOR CONTACTOR BLACK BLACK BLACK OMIT FOR Ø RED ORANGE BLUE YELLOW WHITE BLK X TRANSFORMER 40VA H SEC PRIMARY AR CUTOUT NC NO C 6 2 X2 H2 BLK TIME DELAY RELAY BRN PINK C C2 BROWN REFER TO NAMEPLATE FOR XFMR PRIMARY (INPUT) AND SECONDARY (CONTROL) VOLTAGE. TERMINAL BLOCK (CONTROL) FOR VOLTAGE AND PHASE SEE HEATER NAMEPLATE HD3D-500 thru HD3D 4000 XFMR Color Code Tabulation Pri. Volt. Pri. XFMR Lead Clrs. 20V Sec. Lead Clrs. 24V Sec. Lead Clrs. 230V Sec. Lead Clrs. H H2 X X2 X X2 X X2 208 BLK RED BLK WHT YEL BLU BLK ORG BLK WHT YEL BLU BLK BRN BLK WHT YEL BLU BLK BLK/RED BLK WHT YEL BLU BLK GRY BLK WHT YEL BLU BLK GRY BLK WHT 8
9 3PH ELEMENT WIRING M PH ELEMENT WIRING BUILT IN THERMOSTAT G T T T2 T3 T3 T2 T T T T2 T2 T2 GREEN RED ORANGE 2T 6T3 4T2 GRN/YEL FAN ONLY 2 OFF HEAT 2 AR CUTOUT IN HEATER BRN C C2 CONTROL TERMINAL BLOCK BLK/WHITE POWER CONTACTOR T T2 T3 L L2 L3 2T 4T 6T3 A L 3L2 5L3 A YELLOW MOTOR CONTACTOR 3 3 PURPLE WHITE NC NO C 6 2 BRN BLACK BLACK BLACK X SEC X2 TIME DELAY RELAY PINK OMIT FOR Ø TRANSFORMER 40VA H PRIMARY H2 REFER TO NAMEPLATE FOR XFMR PRIMARY (INPUT) AND SECONDARY (CONTROL) VOLTAGE. LIGHT BLUE FOR VOLTAGE AND PHASE SEE HEATER NAMEPLATE HD3D-500TSP thru HD3DTSP-4000 XFMR Color Code Tabulation Pri. Volt. Pri. XFMR Lead Clrs. 20V Sec. Lead Clrs. 24V Sec. Lead Clrs. H H2 X X2 X X2 208 BLK RED BLK WHT YEL BLU 240 BLK ORG BLK WHT YEL BLU 277 BLK BRN BLK WHT YEL BLU 480 BLK BLK/RED BLK WHT YEL BLU 575 BLK GRY BLK WHT YEL BLU Operation With proper installation this heater will provide efficient and dependable service. Please read the following guidelines to ensure reliable operation.. Do not allow objects such as fabric or other combustible materials to restrict the airflow through the heater. 2. Heater should not be operated unattended unless adequate controls and safety devices have been installed. 3. The ambient operating temperature limits are -20 F to 04 F (-29 C to 40 C). 4. Thermostat : Unit mounted thermostats are nonindicating. The thermostat dial can be rotated 270, with a low setting of 40 F (4 C) when turned fully in the counter clockwise direction and 00 F (38 C) when fully turned in the clockwise direction. The dial is equipped with a position indicator for finer adjustments. The setting of 0 represents 40 F (4 C) and 8 Represents 00 F (38 C). 5. Disconnect: To disconnect the heater, turn lever in the clockwise direction until you hear a click. It is recommended that a remote thermostat be used when ceiling height exceeds 20 feet. 9
10 Maintenance Turn off power to service heater. Do not attempt to service or clean heater while unit is operating as there is hazard of electric shock, injury from operating fan, and burns from hot heating elements. ELECTRIC SHOCK HAZARD. Disconnect all power before installing or servicing heater. Failure to do so could result in personal injury or property damage. In order to optimize heater operating life and prevent unexpected down time, preventative maintenance should be preformed at least once per year, preferably before start of heating season.. Turn off heater and allow to cool before performing these maintenance procedures. 2. Fan motors in these heaters are provided with sealed ball bearings, factory lubricated, requiring no further lubrication under normal service conditions. 3. Vacuum or hose off heater with water (at city pressure) before activating for next heating season to remove accumulated dust or lint which otherwise may smoke or incinerate on initial heat up. 4. Check internal and external wiring connections to ensure they have not become loose. 5. Check motor hardware, including fan hub set screw to ensure nothing has become loose. Do not overtighten. Torque value on set screw should be 35 inlbs. (3.95 N.m) Note: Do not use high pressure cleaning systems. Renewal Parts Identification DETAIL OF UNIVERSAL MOUNTING BRACKET ELEMENT CONFIGURATION FOR 25 THRU 39 KW HEATERS ELEMENT CONFIGURATION FOR 5 THRU 20 KW HEATERS 23 ELEMENT 8 CONFIGURATION FOR 2 THRU 2.5 KW HEATERS 0
11 Figure Elements Heater kw 20 Volt 208 Volt 240 Volt 277 Volt 480 Volt 575 Volt Not Available Not Available Not Available Not Available Not Available Not Available Not Available 30 Not Available Not Available Notes:. All heaters have three (3) elements except for 2kw heaters which have two (2). 2. Specified voltages are heater voltages. See heater nameplate for heater voltage V Heaters - contact factory for replacement parts.
12 Mechanical Parts and Cutout kw Dependent Heater kw Fan (9) Cutout (0) Fitting Kit (3) Mounting Bracket (22) Louver (23) Louver Stop (24) Grille (25) 2 & & & , 30, 35 & Notes:. See heater nameplate for heater kw 2. Fitting kit (3) includes fitting, gasket, screws and heat shrink tubing. 3. Cutout Kit (0) includes cutout, heat shrink and hardware. Electrical Parts Htr. Line Htr. Ctrl. Htr. Motor Relay Time Delay Transformer Terminal Heater kw Voltage Voltage Phase Contactor (3) (4) Relay (5) (6) Block (7) Motor (8) Plug (2) 2 & Not Used Not Used Not Used Not Used & Not Used Not Used & Not Used Not Used , 7.5, 0, 2.5, 5 & or , 7.5, 0, 2.5, 5 & , 7.5, 0, 2.5, 5 & or , 7.5, 0, 2.5, 5 & or , 30, 35 & , 30, 35 & & Not Used Not Used & Not Used Not Used , 7.5, 0, 2.5, 5 & or , 7.5, 0, 2.5, 5 & , 7.5, 0, 2.5, 5 & or , 7.5, 0, 2.5, 5 & or , 30, 35, & , 30, 35, & Electrical Parts Heater Htr. Line Htr. Ctrl Htr. Thermostat Man. Reset Disconnect 3 Position kw Voltage Volt. Phase (30) Cutout (40) Switch (50) Switch (60) 2 & & & , 7.5, 0, 2.5, 5 & or , 7.5, 0, 2.5, 5 & to 00 F , 7.5, 0, 2.5, 5 & or 3 (4 to 38 C) , 7.5, 0, 2.5, 5 & or , 30, 35 & , 30, 35 & & & , 7.5, 0, 2.5, 5 & or , 7.5, 0, 2.5, 5 & to 00 F 5, 7.5, 0, 2.5, 5 & or 3 (4 to 38 C) , 7.5, 0, 2.5, 5 & or , 30, 35, & , 30, 35, & Notes:. See heater nameplate for heater kw, line voltage, control voltage and phase. 2. Thermostat includes compression fitting, knob, indicator label, seal, bulb strap and mounting hardware. 3. Manual reset includes compression fitting, bulb mounting bracket and mounting hardware. 4. Disconnect switch includes handle, face plate, gasket and mounting hardware V Heaters - contact factory for replacement parts. Pilot Light GREEN (70) (LED Replacement Lamp Per ) (LED Replacement Lamp Per ) Pilot Light AMBER (75) (LED Replacement Lamp Per ) (LED Replacement Lamp Per ) Pilot Light RED (76) (LED Replacement Lamp Per ) (LED Replacement Lamp Per ) 204 Chromalox, Inc. Limited Warranty: Please refer to the Chromalox limited warranty applicable to this product at Chromalox, Inc. 347 Heil Quaker Boulevard Lavergne, TN (65)
Type UB-2502A and UB-3002A Forced-Air Heater
Installation, Operation and RENEWAL PARTS IDENTIFICATION 4 (Supersedes PF423-3) JULY, 2002 Type UB-2502A and UB-3002A Forced-Air Heater UB PF423-4 161-027048-001 Figure 1 (Wall Mounted) Figure 2 (Ceiling
More informationInstallation, Operation and
Installation, Operation and RENEWAL PARTS IDENTIFICATION DIVISION 4 SALES REFERENCE DATE SERVICE REFERENCE (Supersedes PF417-13) July, 2002 SECTION UB PF417-14 161-048445-001 Type UB-1002E, UB-1252E, UB-1502E,
More informationCXH-A Forced-Air Heater
Installation and Operation Instructions CXH-A Forced-Air Heater CXH-A-0 EP to CXH-A-5 EP Class I - Groups C & D, Div. & 2 Class II - Groups E, F & G TB - 65 C (29 F) PF490-6-0242-004 July 20 Table A -
More informationX Series (Model B) Explosion Proof Heater
SALES REFERENCE DATE MAY, 2002 5200-2474-000 161-302421-006 INSTALLATION, OPERATION RENEWAL PARTS IDENTIFICATION X Series (Model B) Explosion Proof Heater 2 2 E D Class I Group C & D, Div. 1 & 2 Class
More informationChromalox. Installation, Operation. Portable Industrial Unit Blower Air Heater Types SDRA and SDRA-RG RENEWAL PARTS IDENTIFICATION
Chromalox Installation, Operation and RENEWAL PARTS IDENTIFICATION DIVISION SALES REFERENCE DATE (Supersedes PF99-1) AUGUST, 2010 Portable Industrial Unit Blower Air Types SDRA and SDRA-RG SECTION SDRA
More informationUHIR Series. Horizontal or Vertical Mounting Industrial / Commercial Electric Unit Heater. Owner s Manual
UHIR Series Horizontal or Vertical Mounting Industrial / Commercial Electric Unit Heater Owner s Manual This manual covers installation, maintenance and repair parts. Read carefully before attempting to
More information238 Series. Industrial/Commercial Electric Unit Heater. Owner s Manual
238 Series Industrial/Commercial Electric Unit Heater Owner s Manual This manual covers installation, operation and maintenance. Read carefully before attempting to install, operate or service the 238
More informationRENEWAL PARTS IDENTIFICATION. Type TTUH and TTUH-CO URN Heaters. Dimensions (In.) Extends. Model Volts kw W/In 2 A B C D
Chromalox Installation, Operation and RENEWAL PARTS IDENTIFICATION DIVISION DATE SALES REFERENCE (Supersedes PD00-1) OCTOBER, 000 SECTION TTUH PD00-15 161-0815-001 Type TTUH and TTUH-CO URN Heaters TTUH-0A
More informationInstallation Instructions Type XPMC Air Heater for Hazardous Locations
Installation Instructions Type XPMC Air for Hazardous Locations 1 PF500-1 161-302639-005 May 2017 XPMC Air for Hazardous Locations 12", 2 Heat Sinks with Fixed Thermostat 12", 2 Heat Sinks with Adjustable
More informationLUH HORIZONTAL FAN-FORCED UNIT HEATER
LUH HORIZONTAL FAN-FORCED UNIT HEATER VERSATILE, FAN-FORCED HEATING FOR COMMERCIAL AND INDUSTRIAL COMFORT HEAT APPLICATIONS Horizontal airflow Wall or ceiling mounting Self-contained Totally enclosed fan
More informationInstallation Instructions U-RAD-LT Electric Radiant Heaters
Installation Instructions U-RAD-LT Electric Radiant Heaters 1 PG421-2 161-058006-001 May 2016 2 U-RAD-LT Electric Radiant Heaters The Safety Alert Symbol is used to indicate a risk of personal injury.
More informationInstallation & Maintenance Instructions
Portable High Temperature Blower Attention: Do not operate this heater in explosive areas. Installation & Maintenance Instructions Dear Owner, Congratulations! Thank you for purchasing this new heater
More informationDescription. Construction
LUH LUH PDS Horizontal Unit Heater 2.6 to 45 kw 208, 240, 277 480, 600 Volts Single or 3-Phase 8,900 to 153,600 BTU/Hour Wall or Ceiling Mounting Meets UL and CSA Requirements (600V CSA Certified Only)
More informationKUH. Horizontal Unit Heater. Applications. Description
KUH KUH PDS Horizontal Unit Heater 2.6 kw to 45 kw 208, 240, 277 480, 600 Volts Single or 3-Phase 8,900 to 153,600 BTU/Hour Wall or Ceiling Mounting Meets UL and CSA Requirements (600V CSA Certified Only)
More informationLTFX Electric Tank Immersion Heaters Installation Instructions
LTFX Electric Tank Immersion Heaters Installation Instructions 1 PN403-5 161-049178-101 March 2017 LTFX Electric Tank Immersion Heater Installation Instructions General The Chromalox Electric Tank Immersion
More informationElectric Space Heater
The Choice of Professionals Model No. FUH Series Electric Space Heater Installation & Maintenance Instructions SPECIFICATIONS: FUH 54B Heater Rating and Voltage 5000 W @ 40V 465W @ 40V 333W @ 40V 500W
More informationInstallation and Operation Instructions. Versa. Screw Plug Oil & Water Immersion Heater. PD January 2018
Installation and Operation Instructions Versa TM Screw Plug Oil & Water Immersion Heater 1 PD449-2 161-306451-003 January 2018 B 6" 1-13/16 Cold (Ref.) 9-1/8" 2-3/4 Min. Hole Size 6" 7-7/8" Thermowell
More informationSAVE THESE INSTRUCTIONS
HUHAA Series Modular Unit Heaters Dear Owner, FILE #E21609 Installation & Maintenance Instructions Congratulations! Thank you for purchasing this new heater manufactured by a division of Marley Engineered
More informationType STAR Radiant Heater For Portable Installations
Chromalox Specifications Table 1 DIVISION SALES REFERENCE DATE Type STAR Radiant Heater For Portable Installations 4 SECTION VTS (Supersedes ) PG433-1) PG433-2 161-304901-001 SEPTEMBER, 2012 Model Figure
More informationIMPORTANT INSTRUCTIONS READ & SAVE
5000W Ceiling/Wall Mounted Garage Heater OWNER S MANUAL Model: PH-950N IMPORTANT INSTRUCTIONS READ & SAVE PET OWNERS WARNING: The health of some small pets including birds are extremely sensitive to the
More informationFES - Series Portable Electric Heaters. YES - Series Suspended Electric Heaters CONTENTS
FOSTORIA INDUSTRIES, INC. A DIVISION OF FES - Series Portable Electric Heaters YES - Series Suspended Electric Heaters (FES-1524-3E shown) IMPORTANT SAFETY INFORMATION INSIDE Serious injury or death possible.
More informationWATLOW IND. WATROD Modular Duct Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date:6/11/2008 Rev: 2
I&M NUMBER: 316-42-15-1 Page: 1 _ Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to
More informationChromalox Electric Airduct Heaters with Fintube Heating Elements. Conduit Entrance Plate. DHRF Remote Controls Flanged Type Figure 4
Chromalox DIVISION SALES REFERENCE DATE 4 (Supersedes PF455-2) FEBRUARY, 2001 SECTION Chromalox Electric Airduct eaters with Fintube eating Elements D PF455-3 161-562766-001 Conduit Entrance Plate DII
More informationChromalox. Installation, Operation. Circulation Heaters for Oil or Water Heating RENEWAL PARTS IDENTIFICATION PE GENERAL NWH
Dimensions (Inches) Rotatable Terminal Cover 1" Conduit Opening Outlet 1" FNPT Inlet 1" FNPT 1" FNPT Pipe Plug (or Inlet) Chromalox Installation, Operation and RENEWAL PARTS IDENTIFICATION 6" 4" E1 4 (Supersedes
More informationSERVICE AND INSTALLATION MANUAL MODELS HDO(H) OIL FOR YOUR SAFETY
Bousquet Technologies Inc. 2121, Nobel, Ste Julie, Quebec, Canada, J3E1Z9 SERVICE AND INSTALLATION MANUAL MODELS HDO(H) OIL Oil-Fired air heater for industrial and commercial use. FOR YOUR SAFETY Do not
More informationDescription. Applications
CVEP PDS CVEP Convection for Hazardous Heater For Locations Hazardous Locations Convection Heater 1.8 to 9.0kW (T-2A) 280 C (536 F) 1.6 to 4.0kW (T-3A) 180 C (356 F) 1.8 to 9.0kW (T-2) 1.8 300 C to 9.0kW
More informationFLCH4R Garage and Utility Electric Heater
FLCH4R Garage and Utility Electric Heater Installation, Operation & Maintenance Instructions Model No. Volts Amps Watts BTU/HR Phase High Low High Low High Low Min Fuse Size* FLCH4R 208 17.3 8.66 3600
More informationHI Industrial Utility Heater HI Soleus Air International
HI1-50-03 Industrial Utility Heater HI1-50-03 2010 Soleus Air International Thank you for choosing a Soleus Air Utility Heater. This owner s manual will provide you with valuable information necessary
More informationCAUTION WARNING INSTALLATION INSTRUCTIONS FOR HEALTHY CLIMATE WHOLE HOME DEHUMIDIFIER MODEL HCWH-065 (Y3013) DEHUMIDIFIERS
DEHUMIDIFIERS 506451-01 04/2012 HEALTHY CLIMATE WHOLE HOME DEHUMIDIFIER INSTALLATION INSTRUCTIONS FOR HEALTHY CLIMATE WHOLE HOME DEHUMIDIFIER MODEL HCWH-065 (Y3013) FRONT VIEW (with alternate outlet location
More informationChromalox. Installation, Operation. Screw Plug Heating Solution Control Panel Assembly for Screw Plug Heaters RENEWAL PARTS IDENTIFICATION
Chromalox Installation, Operation and RENEWAL PARTS IDENTIFICATION DIVISION SALES REFERENCE DATE 4 (Supersedes PG422-) DECEMBER, 2000 SECTION RAD PE440 6-058074-002 Screw Plug Heating Solution Control
More informationInstallation and Maintenance Manual Please retain this manual for future reference.
342 N. Co. Rd. 400 East Valparaiso, IN 46383 219-464-8818 Fax 219-462-7985 www.heatwagon.com Installation and Maintenance Manual Please retain this manual for future reference. Electric Construction Heaters
More informationBrasch Hazardous Location Unit Heaters
Brasch Hazardous Location Unit Heaters BHUH Features Designed for rugged industrial applications in hazardous locations where the possibility of explosion or fire exists due to the presence of certain
More informationWATLOW IND. WATROD Circulation Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date: 6/11/2008 Rev: 2.00
I&M NUMBER: 316-42-5-1 Page: 1 Pre Installation Check to make sure that heater received is the same as that ordered. Watlow heaters are built to comply with UL and CSA dielectric requirements, it may be
More informationG Series SAVE THESE INSTRUCTIONS. (Model B) Convector Heater for Hazardous Locations GENERAL! INSTALLATION
G Series (Model B) Convector Heater for Hazardous Locations Type G-Series Convection Heaters are designed for use in Class I, Div. I hazardous environments. Units without control options are suitable for
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 11/06/2018
SECTION 26 2913 - ENCLOSED CONTROLLERS GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationGARAGE HEATER WITH REMOTE INSTRUCTION MANUAL MODEL: HA24-100E HA24-150E. Figure 1
GARAGE HEATER WITH REMOTE INSTRUCTION MANUAL MODEL: HA24-100E HA24-150E Figure 1 PET OWNERS WARNING: Health warning for some small pets, including birds, as they are extremely sensitive to the fumes produced
More informationInstallation & Maintenance Instructions
B2451 & B2452 Series Wall Heaters SPECIFICATIONS MODEL VOLTS HZ AMPS WATTS BTUH B2451 120 60 12.5 1500 5120 B2452 240 60 8.3 2000 6826 208 60 7.2 1500 5120 DIMENSIONS OVERALL Height - 14 1/4 Width - 11
More informationELECTRIC UNIT HEATER REGULAR DUTY
ELECTRIC UNIT HEATER REGULAR DUTY Installation Form RGM 428 (MI500 Revision 0) APPLIES TO: Model EGE INDEX (by page number) Clearance to Combustibles... 3 Dimensions... 4 Electrical... 4 Fan Motor... 4
More informationMASTER PRESSRE MAINTANENCE CONTROLLER. Models PMCE INSTRUCTION MANUAL. C 2018 Master Control Systems, Inc
MASTER PRESSRE MAINTANENCE CONTROLLER Models PMCE INSTRUCTION MANUAL C 2018 Master Control Systems, Inc TABLE OF CONTENTS Important Safety Information. Page 3 General Description and Installation.. Page
More informationCR1 Triton Series. Owner's Manual. Model Coding IMPORTANT INSTRUCTIONS - SAVE THESE INSTRUCTIONS. Corrosion-Resistant Washdown Unit Heaters
ISO 9001 IMPORTANT INSTRUCTIONS - SAVE THESE INSTRUCTIONS Read all instructions before installing or using the heater. Please adhere to instructions published in this manual. Failure to do so may be dangerous
More information5700 SERIES CONFINED SPACE UNIT HEATER Horizontal or Vertical Mounting
5700 SERIES CONFINED SPACE UNIT EATER orizontal or Vertical Mounting MAINTENANCE MANUAL & INSTALLATION INSTRUCTIONS ATTENTION: Read carefully before attempting to install or operate Unit eater. I NTERTEK
More informationOPERATING AND MAINTENANCE MANUAL FOR ELECTRIC STAINLESS STEEL HEATER FOR DEIONIZED (DI) WATER ELECTRIC HEATER COMPANY BASE MODEL D
OPERATING AND MAINTENANCE MANUAL FOR ELECTRIC STAINLESS STEEL HEATER FOR DEIONIZED (DI) WATER ELECTRIC HEATER COMPANY BASE MODEL D HUBBELL ELECTRIC HEATER COMPANY P.O. BOX 288 STRATFORD, CT 06615 PHONE:
More informationWATLOW ELECTRIC MFG CO. WATROD Duct Heater (module only) I& M Manual I&M NUMBER: Page: 1 Date: 11/25/2013 Rev: 4.00
I&M NUMBER: 316-42-16-1 Page: 1 Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to
More informationWATLOW IND. WATROD Flange Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date:6/11/2008 Rev: 2.00
I&M NUMBER: 316-42-8-1 Page: 1 _ Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to
More informationXGB Unit Heater. Certification. Model Coding XGB 038 T3B 3 1 T TEMPERATURE CODE T3B (165 C) T3A (180 C) T2D (215 C) T2C (230 C)
The Norseman Series hazardous environment heater is designed to accommodate your requirements with flexibility and ease of maintenance, even under the toughest conditions. Norseman unit heaters are available
More informationIMPORTANT INSTRUCTIONS READ & SAVE
WALL/CEILING MOUNT HEATER OWNER S MANUAL Model No.: DR-966 6000W 240V 60HZ IMPORTANT INSTRUCTIONS READ & SAVE 1 TABLE OF CONTENTS Important Instructions.. 3 Specifications and Wiring Diagram 5 Parts of
More informationInstallation, Operation, Maintenance Instructions and RENEWAL PARTS IDENTIFICATION
Chromalox Installation, Operation, Maintenance Instructions and RENEWAL PARTS IDENTIFICATION DIVISION 4 SALES REFERENCE DATE SERVICE REFERENCE (Supersedes PD411-9) AUGUST, 2008 SECTION TL PD411-10 161-048529-001
More informationWATLOW IND. FIREBAR Flange Heater Installation & Maintenance Manual I&M NUMBER: Page: 1 Date: 6/11/2008 Rev: 2.00
I&M NUMBER: 316-42-2-1 Page: 1 Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to elements
More informationGallery Electric Fireplaces
Gallery Electric Fireplaces Homeowner s Installation Instructions & Operating Manual Model: GBI-34, GBI-41 Only use this heater as described in this manual. Any other use is not recommended by the manufacturer,
More informationExplosion Resistant Unit Heater Owner s Manual This manual covers installation, maintenance, repair, and replacement parts.
EXUB Explosion Resistant Unit Heater Owner s Manual This manual covers installation, maintenance, repair, and replacement parts. Forced-Air Heater for Hazardous Locations Class I, Divisions 1 & 2, Groups
More informationToll-Free: TPI CORPORATION Hazardous Location Fan Forced Unit Heater
Toll-Free: 1-800-462-4983 Hazardous Location Fan Forced Unit Heater 3-25KW for Class I, Group C & D, Division 1 & 2 and Class II, Groups E, F & G, Divisions 1 & 2. Designed for rugged industrial applications
More information40E ELECTRIC FAN HEATER
40E ELECTRIC FAN HEATER PRODUCT MANUAL IMPORTANT READ AND UNDERSTAND THIS MANUAL BEFORE ASSEM- BLING, STARTING OR SERVICING THE HEATER. IMPROPER USE OF HEATER CAN CAUSE SERIOUS INJURY. KEEP THIS MANUAL
More informationIMPORTANT SAFETY INFORMATION
OPERATION INSTALLATION PARTS MANUAL www.fostoriaindustries.com Made in U.S.A. ELECTRIC PORTABLE HEATER FES-1024-1CA 08860010 YES-1024-1CA 08861510 FES-1520-3A 08860110 YES-1520-3A 08860810 FES-1524-1A
More informationINSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS FOR 350 SERIES CIRCULATION HEATERS
INDEECO Circulation Heaters are designed to provide years of trouble free operation if properly installed and maintained. Please read and follow these instructions for installing and maintaining the heater.
More informationExplosion-Proof Forced Air Unit Heater - XGB
Explosion-Proof Forced Air Unit Heater - XGB The XGB Series hazardous environment heater is designed to accommodate your requirements with flexibility and ease of maintenance, even under the toughest conditions.
More informationMASTER JOCKEY PUMP CONTROLLER. Model JPCE INSTRUCTION MANUAL. C 2018 Master Control Systems, Inc
MASTER JOCKEY PUMP CONTROLLER Model JPCE INSTRUCTION MANUAL C 2018 Master Control Systems, Inc TABLE OF CONTENTS Important Safety Information. Page 3 General Description and Installation.. Page 4 Model
More informationIMPORTANT SAFETY INFORMATION:
Owner s Manual Model CUH05B31T IMPORTANT SAFETY INFORMATION: Always read this manual first before attempting to install or use this heater. For your safety, always comply with all warnings and safety instructions
More informationIMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS W Fan Force Electric Space Heater DANGER ELECTRIC SHOCK OR FIRE HAZARD Figure 1 Covers all W Series models WARNING Read Carefully - These instructions are written in an effort to
More informationWATLOW ELECTRIC MFG CO. FIREBAR Screw Plug Installation & Maintenance Manual I&M NUMBER: Page: 1 Date: 11/25/2013 Rev: 4.
I&M NUMBER: 316-42-3-1 Page: 1 Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to elements
More informationExplosion-Proof Forced Air Unit Heater - XGB
Explosion-Proof Forced Air Unit Heater - XGB The XGB Series hazardous environment heater is designed to accommodate your requirements with flexibility and ease of maintenance, even under the toughest conditions.
More information961 SERIES CONFINED SPACE UNIT HEATER Horizontal or Vertical Mounting
961 SERIES CONFINED SPACE UNIT EATER orizontal or Vertical Mounting ATTENTION: Read carefully before attempting to install or operate Unit eater. FEATURES: Forced air electric unit heater available in:
More informationD Built-in door interlocking disconnect switch E Monel elements 1st Generation. Heater Kilowatts kw kw kw kw kw
IMPORTANT INSTRUCTIONS - SAVE THESE INSTRUCTIONS Read all instructions before installing or using the heater. Please adhere to instructions published in this manual. Failure to do so may be dangerous and
More information18E ELECTRIC FAN HEATER
18E ELECTRIC FAN HEATER MODEL 18E-1 (Single Phase) MODEL 18E-3 (Three Phase) PRODUCT MANUAL IMPORTANT READ AND UNDERSTAND THIS MANUAL BEFORE ASSEM- BLING, STARTING OR SERVICING THE HEATER. IMPROPER USE
More informationINSTRUCTION MANUAL Heavy Electric Utility Heater Model HA24-50E HA24-75E
INSTRUCTION MANUAL Heavy Electric Utility Heater Model HA24-50E HA24-75E Figure 1 PET OWNERS WARNING: The health of some small pets including birds are extremely sensitive to the fumes produced during
More informationIMPORTANT INSTRUCTIONS READ & SAVE
5,000W/240V WALL / CEILING MOUNTED GARAGE HEATER WITH ELECTRONIC CONTROLLER AND REMOTE OWNER S MANUAL IMPORTANT INSTRUCTIONS READ & SAVE Model: PH-950NR PET OWNERS WARNING: The health of some small pets
More information! The Caution Symbol (exclamation point) alerts you to a "CAUTION", a safety or
I&M NUMBER: 316-42-10-1 Page: 1 Pre Installation Check to make sure that heater received is the same as that ordered. Elements may come in contact with each other during shipment. Minor adjustments to
More information5KW ELECTRIC FAN HEATER
5KW ELECTRIC FAN HEATER MODEL NO: DEVIL 7005 PART NO: 6935452 OPERATION & MAINTENANCE INSTRUCTIONS LS0615 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,
More informationCR1 Series Triton Corrosion Resistant Washdown Heaters
CR1 Series Triton Corrosion Resistant Washdown Heaters Ruffneck CR1 Triton Series is a new generation of NEMA 4X corrosion-resistant washdown heaters. The first UL listed Type 4X heater with models ranging
More informationELECTRIC UNIT HEATER UH SERIES
ELECTRIC UNIT HEATER UH SERIES 3KW THRU 15KW INSTALLATION INSTRUCTIONS MODEL DESIGNATION SYSTEM EXAMPLE: H 1 H UH 15 C A 1 000 Volts Phase Motor Voltage Model Series Heater Wattage Mfg. Code Control Volts
More information3480/RCH SERIES INSTALLATION INSTRUCTIONS
3480/RCH SERIES INSTALLATION INSTRUCTIONS NOTE: If plaster frame is required for installation order it as an option. ATTENTION: Read carefully before attempting to install or operate the heater. GENERAL
More informationE1.5 ELECTRIC FAN HEATER
E1.5 ELECTRIC FAN HEATER PRODUCT MANUAL IMPORTANT READ AND UNDERSTAND THIS MANUAL BEFORE ASSEM- BLING, STARTING OR SERVICING THE HEATER. IMPROPER USE OF HEATER CAN CAUSE SERIOUS INJURY. KEEP THIS MANUAL
More informationHardwired Electric Garage Heater
Hardwired Electric Garage Heater G73 OWNERS MANUAL v1.0 Read and save these instructions. Manual v1.1 2 A Name You Can Trust Trust should be earned and we will earn yours. Customer happiness is the focus
More information30KW ELECTRIC FAN HEATER
30KW ELECTRIC FAN HEATER MODEL NO: DEVIL 7030 PART NO: 6935458 OPERATION & MAINTENANCE INSTRUCTIONS LS0615 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,
More informationElectric Garage Heater
Electric Garage Heater G73 OWNERS MANUAL Read and save these instructions. A Name You Can Trust Trust has to be earned and we will earn yours. Customer happiness is the focus of our business. 2 From the
More informationDR-180 Through the Wall Exhaust Fan PRODUCT MANUAL & INSTALLATION GUIDE
DR-180 Through the Exhaust Fan PRODUCT MANUAL & INSTALLATION GUIDE READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT
More informationInstallation Instructions
50ZPB, C, 50ZHB, C, PA3Z ---A, PH3Z ---A, PA4Z, PH4Z, PAJ4,PHJ4,WJA4,WJH4 SMALL PACKAGED PRODUCTS (SPP) Accessory Electric Heaters 5---20 kw For 14 SEER, R---410A Manufactured Home Installation Instructions
More informationThermal Devices, Inc. Mount Airy, Maryland USA
Unit Heater 2.6-50 kw 8,900 170,600 Btuh 208, 240, 277, 480, and 600 volt 1 or 3 phase Wall or Ceiling Mounted Canadian Standards Standards Description The Chromalox self-contained blower heater provides
More informationUSER S INFORMATION MANUAL
USER S INFORMATION MANUAL UPFLOW, DOWNFLOW, UPFLOW/HORIZONTAL & HORIZONTAL ONLY INDUCED DRAFT GAS FURNACES Recognize this symbol as an indication of Important Safety Information If the information in this
More informationInstruction Manual HWR MODEL RESISTO-FLO ELECTRIC BOILER
Page 1 of 16 Instruction Manual HWR MODEL RESISTO-FLO ELECTRIC BOILER Page 2 of 16 FOREWORD The HWR Resisto-Flo Electric Hot Water Boiler is designed to provide a compact packaged unit requiring a minimum
More informationIndirect gas-fired air heater
Indirect gas-fired air heater SERIES HD INSTALLATION AND SERVICE MANUAL MANUFACTURED BY : BROTHERS LIMITED WARNING Improper installation, modification, adjustment or maintenance may cause damage, injury
More informationIMPORTANT INSTRUCTIONS READ & SAVE
7,500W/240V WALL / CEILING MOUNTED GARAGE HEATER OWNER S MANUAL Model: DR-975 7500W 240V 60Hz IMPORTANT INSTRUCTIONS READ & SAVE 1 TABLE OF CONTENTS Important Instructions. 3 Installation Instructions...
More information40E ELECTRIC FAN HEATER
40E ELECTRIC FAN HEATER PRODUCT MANUAL IMPORTANT READ AND UNDERSTAND THIS MANUAL BEFORE ASSEM- BLING, STARTING OR SERVICING THE HEATER. IMPROPER USE OF HEATER CAN CAUSE SERIOUS INJURY. KEEP THIS MANUAL
More informationHumidity and Thermostat control box for Attic Fan
Humidity and Thermostat control box for Attic Fan MODEL: ILG001TH 120VAC, 60Hz Owner s Manual PLEASE READ AND SAVE THESE INSTRUCTIONS 1 TABLE OF CONTENTS Important Instructions. 3 Installing Instructions...
More informationINSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION MODULAR AIR HANDLER MODEL: N*AH CONTENTS GENERAL... 1 INSPECTION... 2 REFERENCE... 2 LIMITATIONS... 2 LOCATION... 2 BLOWER/COIL ASSEMBLY UPFLOW AND HORIZONTAL INSTALLATIONS...
More informationInstallation and Operation Manual For Hunter Ceiling Fans
Installation and Operation Manual For Hunter Ceiling Fans 1 2 CONGRATULATIONS! Your new Hunter ceiling fan is an addition to your home or office that will provide comfort and performance for many years.
More informationSWP. (Models SWP08 through SWP20) IMPORTANT! Read before proceeding! OPERATION & MAINTENANCE MANUAL
SWP (Models SWP08 through SWP20) OPERATION & MAINTENANCE MANUAL IMPORTANT! Read before proceeding! Read carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationInstallation & Maintenance Instructions
IMPORTANT INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS Saving energy and creating healthy, comfortable environments No. II-450 Date July, 2015 DRIVE-THRU UNIT 3 AIR CURTAIN SERIES DTU03 for outdoor use
More informationHomeowner s Installation Instructions & Operating Manual
Homeowner s Installation Instructions & Operating Manual ELECTRIC HEATER WITH REMOTE CONTROL Model: GI-32-ZC IS-36-ZC, IS-42-ZC Insert surrounds READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING
More informationUSER S GUIDE SHU SERIES COMMERCIAL INDUSTRIAL UNIT HEATER REPLACEMENT COMPONENT LIST INCLUDED
USER S GUIDE SHU SERIES COMMERCIAL INDUSTRIAL UNIT HEATER REPLACEMENT COMPONENT LIST INCLUDED This unit complies with the CSA and UL standards SYSTÈME QUALITÉ CERTIFIÉ - REGISTERED QUALITY SYSTEM WARNING
More informationInstallation Instructions
Installation Instructions PAM3 SERIES PACKAGE AIR CONDITIONERS TABLE OF CONTENTS SAFETY LABELING AND SIGNAL WORDS... 2 UNIT DIMENSIONS... 3 SAFE INSTALLATION REQUIREMENTS... 3 LOCATING THE UNIT... 3 CLEARANCES...
More informationInstallation Instructions and Homeowner's Manual
Kozy-World EF5524KD Freestanding Electric Fireplace Installation Instructions and Homeowner's Manual WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY
More informationEF5528RKD Freestanding Electric Fireplace
EF5528RKD Freestanding Electric Fireplace Installation Instructions and Homeowner's Manual WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE,
More informationREAD AND SAVE THESE INSTRUCTIONS
MODELS 170F, 174F & 178F FAN FORCED WALL HEATERS FINISH ASSEMBLIES FOR USE WITH BROAN MODEL 171H ROUGH-IN HOUSING READ AND SAVE THESE INSTRUCTIONS IMPORTANT INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE INSTALLING
More informationREAD AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AN
READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE
More informationIndustrial Air Heaters
HVH Horizontal or Vertical Discharge Fan Forced Unit Heater Industrial Air Heaters 2.6-50 kw 8,900 170,600 Btuh 208, 240, 277, 480, and 600 volt 1 or 3 phase Vertical or Horizontal Airflow Wall or Ceiling
More informationInstallation Instructions Remote Blowers
Installation Instructions Remote Blowers Models: REMP3, REMP16 Suitable for use in a household cooking area. Suitable for use with solid state controls. To complete this blower, a Dacor hood assembly or
More information15KW ELECTRIC FAN HEATER
15KW ELECTRIC FAN HEATER MODEL NO: DEVIL 7015 PART NO: 6935456 OPERATION & MAINTENANCE INSTRUCTIONS LS0615 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,
More informationPLEASE READ AND SAVE THESE INSTRUCTIONS
Metal Gable Fan MODEL: ILG8G14-16TH 120VAC, 60Hz 3.15A 220W With THERMOSTAT / HUMIDISTAT CONTROL Owner s Manual PLEASE READ AND SAVE THESE INSTRUCTIONS 1 TABLE OF CONTENTS Important Instructions. 3 Specifications....
More informationP4000 Construction Heater
342 N. Co. Rd. 400 East Valparaiso, IN 46383 219-464-8818 Fax 219-462-7985 www.heatwagon.com Installation and Maintenance Manual Please retain this manual for future reference. P4000 Construction Heater
More informationW Model 1RKU2 w/optional Wall mount. Unit Model Weight (Lbs) Kilowatts Volts- Phase Amps Fan Output Heat Output
Operating Instructions & Parts Manual 1RKT2, 1RKT3, 1RKT4, 1RKT5, 1RKT9 and 1RKU2 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the
More information