AD-360X2 Parts Manual

Transcription

1 AD-360X2 Parts Manual Phase 7 American Dryer Corporation 88 Currant Road Fall River MA USA Telephone: +1 (508) / Fax: +1 (508) techsupport@amdry.com ADC Part No

2 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following FOR YOUR SAFETY caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. POUR VOTRE SÉCURITÉ Ne pas entreposer ni utiliser d essence ni d autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE RESELLER S NAME AD-360X2 MODEL NO. Serial Number(s) Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) or telephone your order directly to the ADC Parts Department at (508) Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. IMPORTANT NOTE TO PURCHASER Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. 2 American Dryer Corporation

3 Quick Reference Diagram For Detailed Information See The Table Of Contents On Next Page

4 Table of Contents Coin Front Panel Assembly... 5 Non-Coin Front Panel Assembly... 6 Right Coin Computer Panel Assembly... 7 Left Coin Computer Panel Assembly... 8 Non-Coin Computer Panel Assembly... 9 Coin Chute Assembly Easy Debit Card Coin Chute Assembly Coin Box / Vault Assembly (Left and Right) Main Door Steel Assembly Main Door Switch Assembly Tumbler / Support Assemblies Top Locking Lint Basket Assembly Bottom Locking Lint Basket Assembly Top Lint Basket Assembly Bottom Lint Basket Assembly Separator Assembly Rotational Sensor / Sail Switch and Teflon Backup Washer Plate Lint Coop and Adjustment Wheel Bracket Assembly Left Rear Wheel Bracket (3-Bolt) Right Rear Wheel Bracket (3-Bolt) Microprocessor Temperature Sensor Bracket Assembly Top Burner Box Assembly Bottom Burner Box Assembly Blower Motor Assembly Rear Electrical Panel (Top and Bottom) Drive Motor / Motor Mount Assemblies Exhaust Duct Assembly Rear Back Guard Assembly Wrapper Gasket American Dryer Corporation

5 Coin Front Panel Assembly White Right-Hand Coin Front Panel Assembly (includes illus. nos. 1 through 3 and 7) Bisque Right-Hand Coin Front Panel Assembly (includes illus. nos. 1 through 3 and 7) Stainless Steel Right-Hand Coin Front Panel Assembly (includes illus. nos. 1 through 3 and 7) Friction Door Latch Kit (includes illus. nos. 2 and 3) /32 x 1/4 Rivet 4 1 Top Hinge Block Assembly (refer to Main Door Steel Assembly on page 13) 5 1 Main Door Switch (refer to Main Door Switch Assembly on page 14) 6 1 Bottom Hinge Block Assembly (refer to Main Door Steel Assembly on page 13) Arrow Backup Plate #10-16 x 1-1/2 Hex Head TEK Screw Black Kick Plate #10-16 x 3/4 Hex Head TEK Crimptite Screw #10-16 x 1/2 Hex Head TEK Crimptite Screw

6 Non-Coin Front Panel Assembly White Right-Hand Front Panel Assembly (includes illus. nos. 1 through 3 and 7) Bisque Right-Hand Front Panel Assembly (includes illus. nos. 1 through 3 and 7) Friction Door Latch Kit (includes illus. nos. 2 and 3) /32 x 1/4 Rivet 4 1 Top Hinge Block Assembly (refer to Main Door Steel Assembly on page 13) 5 1 Main Door Switch (refer to Main Door Switch Assembly on page 14) 6 1 Bottom Hinge Block Assembly (refer to Main Door Steel Assembly on page 13) Arrow Backup Plate #10-16 x 1-1/2 Hex Head TEK Screw Black Kick Plate #10-16 x 3/4 Hex Head TEK Crimptite Screw #10-16 x 1/2 Hex Head TEK Crimptite Screw 6 American Dryer Corporation

7 Right Coin Computer Panel Assembly Computer Cover x 1 Large Character Display Phase 7 Coin Board (for models mfd. as of February 1, 2004) Phase 7 Coin Board (for models mfd. prior to February 1, 2004) Phase 7 Keypad #10-32 x 1/4 Phillips Pan Head Tap Screw M3 Metric Hex Nut /8 x 9/16 Noise Suppressor Tape #6 Internal / External Star Washer #6-32 x 1/4 Phillips Round Head Machine Screw Optic Switch Protector #8-32 Pal Nut Phase 7 25 Coin Acceptor Assembly Control Panel Lock Assembly Phase 7 Coin Control Panel (panel only) Hanke Phase 7 Optic Switch Assembly

8 Left Coin Computer Panel Assembly Computer Cover x 1 Large Character Display Phase 7 Coin Board (for models mfd. as of February 1, 2004) Phase 7 Coin Board (for models mfd. prior to February 1, 2004) Phase 7 Keypad #10-32 x 1/4 Phillips Pan Head Tap Screw M3 Metric Hex Nut /8 x 9/16 Noise Suppressor Tape #6 Internal / External Star Washer #6-32 x 1/4 Phillips Round Head Machine Screw Optic Switch Protector #8-32 Pal Nut Phase 7 Coin Control Panel (panel only) Phase 7 25 Coin Acceptor Assembly Control Panel Lock Assembly Hanke Phase 7 Optic Switch Assembly 8 American Dryer Corporation

9 Non-Coin Computer Panel Assembly Computer Cover x 1 Large Character Display Phase 7 Coin Board (for models mfd. as of February 1, 2004) Phase 7 Coin Board (for models mfd. prior to February 1, 2004) Phase 7 Keypad #10-32 x 1/4 Phillips Pan Head Tap Screw #6-32 x 1/4 Phillips Round Head Machine Screw #6 Internal / External Star Washer /8 x 9/16 Noise Suppressor Tape Control Panel Lock Assembly Phase 7.3 Non-Coin Computer Panel

10 Coin Chute Assembly Coin Chute Assembly Complete (includes illus. nos. 1 through 5) Control Panel Lock Plate Easy Card Lock Bracket /4-20 Hex Nut /4-20 Free Spin Wash Nut 10 American Dryer Corporation

11 Easy Debit Card Coin Chute Assembly Coin Chute Plate /16-18 Clinch Nut /4 x 3/4 Clinch Stud Control Panel Slide Clip Control Panel Lock Plate /4 x 1/2 Clinch Stud /4-20 Hex Nut /4-20 Free Spin Wash Nut Easy Card Lock Bracket Easy Debit Card Coin Chute Assembly

12 Coin Box / Vault Assembly (Left and Right) Black Left / Right Coin Box Face Plate ONLY Left Coin Box with Black Face Plate (less lock) Coin Box Lock Kit (includes 2 locks keyed alike ) * 1 Coin Box Lock Key ONLY Black Left Coin Vault ONLY Black Left / Right Coin Box Face Plate ONLY Right Coin Box with Black Face Plate (less lock) Black Right Coin Vault ONLY * Specify key number when ordering. 12 American Dryer Corporation

13 Main Door Steel Assembly Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Stainless Steel Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) Stainless Steel Top Hinge Block Assembly /4-20 x 3/4 Black Cap Head Setscrew /4 Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) Stainless Steel Bottom Hinge Block Assembly /4-20 x 3/4 Black Cap Head Setscrew /4-20 x 3/4 Stainless Steel Cap Head Setscrew /4-20 x 5/8 Black Carriage Bolt /4-20 x 5/8 Stainless Steel Carriage Bolt (for models with stainless steel doors) /4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut #10-32 Stainless Steel Hex Acorn Nut Door Latch Screw /4-20 x 5/8 Black Carriage Bolt /4-20 x 5/8 Stainless Steel Carriage Bolt (for models with stainless steel doors) /4-20 Free Spin Wash Nut Black Main Door Handle ONLY Stainless Steel Main Handle ONLY Door Glass

14 Main Door Switch Assembly #6-32 x 7/8 Clinch Stud #6-32 Hex Nut #6 Internal / External Star Washer Door Switch Flag Terminal Black Main Door Switch Housing ONLY Stainless Steel Main Door Switch Housing ONLY Black Main Door Switch Housing Complete (includes illus. nos. 1 through 4 and 6) Stainless Steel Main Door Switch Housing Complete (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16 Phillips Pan Head TEK Screw 14 American Dryer Corporation

15 Tumbler / Support Assemblies /32 x 3/16 Pop Rivet Spacer Plate Inner Friction Teflon Pad x 2-1/2 x 1/8 Felt Collar One Arm Tumbler Support Assembly (includes illus. nos. 2, 3, and 5) Tumbler Assembly for One Arm Tumbler Support (includes illus. nos. 1, 4, and 9) /32 x 3/16 Pop Rivet Rib 105 Long (J) High Temperature Belt Inner Ring Felt Collar #847 Adhesive for Felt Collar (5 oz. tube)

16 Top Locking Lint Basket Assembly Lint Basket Felt /32 x 3/16 Pop Rivet Key ONLY for XX /16 Offset x 1-1/8 Long Cam /4 x 3/8 Neoprene Sponge Tape (sold by the foot) Top Locking Lint Basket with Lock (white) (includes illus. nos. 1 through 7) Lint Basket Lock with Cam (no key) Lint Basket Lock (no cam and key) for Stainless Steel ONLY 16 American Dryer Corporation

17 Bottom Locking Lint Basket Assembly Lint Basket Felt /32 x 3/16 Pop Rivet Key ONLY for XX /16 Offset x 1-1/8 Long Cam /8 x 3/8 Neoprene Sponge Tape (sold by the foot) Bottom Locking Lint Basket Assembly with Lock (black) (includes illus. nos. 1 through 7) Lint Basket Lock with Cam (no key)

18 Top Lint Basket Assembly Lint Basket Felt /32 x 3/16 Pop Rivet /4 x 3/8 Neoprene Sponge Tape (sold by the foot) White Lint Basket Assembly (includes illus. nos. 1 through 4) 18 American Dryer Corporation

19 Bottom Lint Basket Assembly Lint Basket Felt /32 x 3/16 Pop Rivet /4 x 3/8 Neoprene Sponge Tape (sold by the foot) Black Lint Basket Assembly (includes illus. nos. 1 through 4)

20 Separator Assembly /4-20 Free Spin Wash Nut Inner Ring Separator Bracket Inner Ring Separator Assembly (includes illus. nos. 1 through 3) Tumbler Separation Felt 20 American Dryer Corporation

21 Rotational Sensor / Sail Switch and Teflon Backup Washer Plate Rotational Sensor Bracket Sail Switch Flat Damper Tinnerman Twin Speed Nut /8 Push-On Fastener /32 x 1/2 Self-Clinching Stud /4-20 Free Spin Wash Nut Phillips Pan Head Screw Sail Switch Sail Switch Rod Teflon Backup Washer and Magnet Assembly (includes illus. nos. 10 through 12, 17, and 18) Thrust Bearing Backup Washer Backup Washer Rivet Spacer /8 Diameter Aluminum Rivet /16 Lock Washer /16-18 x 7/8 Hex Bolt Plate Spacer Inner Friction Pad Outer Teflon Friction Pad x 3/4 x Door Magnet Phase 7 Rotational Sensor Switch

22 Lint Coop and Adjustment Wheel Bracket Assembly Thrust Wheel Mount /4-20 x 5/8 Stainless Steel Carriage Bolt Tumbler Wheel Spacer M10 x 25 mm Shoulder Screw M8 Hex Nut /16 Split Lock Washer Duratred Idler Wheel Arcolectric Door Switch #10-16 x 1/2 Hex Head TEK Crimptite Screw Lint Switch Bracket /4-20 Free Spin Wash Nut /32 x 3/16 Pop Rivet Lint Coop #8-32 x 3/8 Hex Nut Harness Stiffener 22 American Dryer Corporation

23 Left Rear Wheel Bracket (3-Bolt) /8-24 Hex Nut /4-20 x 3/4 Hex Head Machine Bolt /4 Split Lock Washer Left Rear Roller Wheel Bracket ONLY (3-bolt) Left Rear Roller Wheel Bracket Assembly with Hardware (3-bolt) Thruster Wheel

24 Right Rear Wheel Bracket (3-Bolt) Right Rear Roller Wheel Bracket ONLY (3-bolt) Right Rear Roller Wheel Bracket Assembly with Hardware (3-bolt) /8-24 Hex Nut /4-20 x 3/4 Hex Head Machine Bolt /4 Split Lock Washer Thruster Wheel 24 American Dryer Corporation

25 Microprocessor Temperature Sensor Bracket Assembly Temperature Sensor Bracket Assembly Complete (includes illus. nos. 1 through 6, 8, and 12 through 14) Sensor Bracket ONLY #6-32 Hex Nut #6 Star Washer #6-32 x 1/4 Phillips Round Head Machine Screw Microprocessor Temperature Sensor Probe Assembly (includes illus. nos. 5, 6, and 12 through 14) /4 Push-On Fastener /4-20 Free Spin Wash Nut Temperature Sensor /16 Push Mount Wire Tie Pin Terminal ONLY Position Connectors (male) /4 Push-On Terminal Socket Terminal ONLY Pin / Socket Extraction Tool Not Illustrated Position Connectors (female)

26 Top Burner Box Assembly Two Port Burner Manifold /2 24 VAC (natural gas) Gas Valve /4 x 4 Black Nipple Bottom Burner Baffle /4-20 x 1/2 Hex Head Machine Bolt Burner Hi Limit Direct Spark Ignition Module Mounting Panel Pipe Bracket /4 x 1/2 x 1/2 Tee /2 Close Nipple Direct Spark Ignition Johnson Control Open / Closed Bushing Ignition with Flame Probe Orange Stainless Steel Burner Tube #10 x 1 Hex Washer TEK Screw /8 Universal Bushing Ignition Cable H.V. Wiring (gray) with Spade Connector Burner Orifice Gas Valve Mounting Bracket Manifold Support Burner Tube Hood /4 Flat Washer Small Burner Tube Bracket #6-32 x 3/4 Black Self-Clinching Stud #6-32 Hex Nut #10-16 x 1/2 Hex Head TEK Crimptite Screw Green Ground Screw /4-20 Hex Nut /4 Split Lock Washer /4 Black Union Phase 7 Burner Box 26 American Dryer Corporation

27 Bottom Burner Box Assembly Two Port Burner Manifold Stainless Steel Burner Tube /2 24 VAC (natural gas) Gas Valve /2 x 1/2 x 60 Stainless Steel Flex Hose Bottom Burner Baffle Ignition with Flame Probe Direct Spark Ignition Johnson Control Direct Spark Ignition Module Mounting Panel /2 x 1/2 Street Elbow Small Burner Tube Bracket Burner Hi-Limit Ignition Cable H.V. Wiring with (gray) Spade Connector Burner Tube Hood Flexible Gas Line Bracket Manifold Support Burner Orifice Gas Valve Mounting Bracket /4-20 x 1/2 Hex Head Machine Bolt Open / Closed Bushing /8 Universal Bushing #10 x 1 Hex Washer TEK Screw #6-32 x 3/4 Black Self-Clinching Stud #6-32 Hex Nut #10-16 x 1/2 Hex Head TEK Crimptite Screw /4 Split Lock Washer /4-20 Hex Nut Green Ground Screw /4 Flat Washer Phase 7 Burner Box

28 Blower Motor Assembly /4 hp 115/230v/60 Hz Blower Motor /2 x 1-1/16 Flat Washer /2-20 Left-Hand Jam Nut /8 x 3/32 x 1-1/8 Key /4 Split Lock Washer /16 Flat Washer /16 Split Lock Washer /16-18 Hex Nut /16-18 x 3/4 Carriage Bolt /8 x 3/8 Neoprene Sponge Tape (sold by the foot) /4-20 x 1/2 Phillips Round Head Machine Screw Blower Motor Mount ONLY /2 Riveted Impellor with 1/2 Bore Blower Motor and Mount Assembly Complete (includes illus. nos. 1 through 13) 28 American Dryer Corporation

29 Rear Electrical Panel (Top and Bottom) Transformer Assembly #6-32 Pal Nut #6-32 x 1 Phillips Round Head Screw #8-32 x 3/4 Phillips Round Head Machine Screw Quick Connect Power Block Double Pole 24v Contactor #8-18 x 7/16 Phillips Pan Head TEK Screw Ground Label Fuse Holder Electrical Service Label L Terminal Lug Green Ground Screw /4 External / Internal Shakeproof Washer /4-20 Hex Nut #8-32 Pal Nut Position Block 250v 25A /4-Amp (Slo-Blo) Fuse R.C. Network Assembly

30 Drive Motor / Motor Mount Assemblies Sheave /8-16 x 2-1/4 Long Spade Bolt /16 Flat Washer /16-18 Hex Nut /16 Split Lock Washer Efson Back Side Idler Assembly /32 x 3/8 I.D. Bronze Bushing /8-16 x 1-1/2 Hex Head Tap Bolt /16-18 x 3/8 x 3/8 Shoulder Screw /4-20 x 1/4 x 5/8 Shoulder Bolt /8-16 Hex Nut /8-16 x 3/4 Hex Machine Bolt /8 Split Lock Washer /8 x 1 O.D. Flat Washer /16-18 x 3/4 Carriage Bolt /8 Extension Spring /4 hp 115v 60 Hz Motor Idler Arm Motor Mount /16-24 x 3/8 Allen Setscrew 30 American Dryer Corporation

31 Exhaust Duct Assembly /32 Pop Rivet Blower Motor Assembly with Riveted Impellor Harness Stiffener /4 Flat Washer /4-20 x 3/4 Hex Head Machine Bolt /4 Split Lock Washer Exhaust Access Plate #10-16 x 1/2 Hex Head TEK Screw /32 x 3/16 Pop Rivet Air Plenum Assembly Lower Blower Housing Upper Blower Housing #8-32 Pal Nut #8-32 x 3/4 Phillips Round Head Machine Screw

32 Rear Back Guard Assembly Leveling Leg Back Guard Short #10-16 x 1/2 TEK Screw Top Pocket Flex Gas Line Bracket Bottom Pocket Flex Gas Line Pivot Support Rear Right Side Panel Support Assembly /2 x 1/2 x 60 Stainless Steel Flex Hose 32 American Dryer Corporation

33 Wrapper Gasket Wrapper Gasket (sold by the foot) M Mastic Left Wrapper Assembly Right Wrapper Assembly Axial Sensor Probe Assembly Inner Back Cover Plate Left Side Air Blockage Plate Right Side Air Blockage Plate

34 ADC Part No /25/14