Trees to be preserved. Site conditions 1/32 =1 Final Project - Porto Portugal, Dennis Selke Spring 2016 AR833 John Dobyns, Instructor

Size: px

Start display at page:

Download "Trees to be preserved. Site conditions 1/32 =1 Final Project - Porto Portugal, Dennis Selke Spring 2016 AR833 John Dobyns, Instructor"

Colleen Chase
5 years ago
Views:

1 Porto Studio 21 -Environmental science 3 Dennis Selke Spring 21 John Dobyns Instructor, AR33 Trees to be preserved ReplaceableTrees Site conditions 1/ =1

Electrical room Chases Boiler room Chiller and pump room 2 1 13 12 Sprinkler

2 Electrical room Chases Boiler room Chiller and pump room Sprinkler main and backflow preventer UP 2 UP Mechanical spaces Lowest Basement level -1 1/ =1

3 Sprinkler heads Branches Main Riser 1 DN DN UP Auditorium Auditorium sprinkler plan

Catalog Number Notes Light fixtures, LED flat round ceiling light 2k color temp w 12v FEATURES & SPECIFICATIONS INTENDED USE The adjustable LED Gimbal downlighting module is % more efficient than

Multiple trim finish options are available to pick the style that matches the décor for any office or home.

Retrofits into most existing recessed downlighting installations or new construction and remodel applications.

8 Catalog Number Notes Light fixtures, LED flat round ceiling light 2k color temp w 12v FEATURES & SPECIFICATIONS INTENDED USE The adjustable LED Gimbal downlighting module is % more efficient than incandescent luminaries, performing for 3, hours or more with exceptional energy efficiency and near zero maintenance. Multiple trim finish options are available to pick the style that matches the décor for any office or home. The LED Gimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural features. Retrofits into most existing recessed downlighting installations or new construction and remodel applications. CONSTRUCTION Spun steel gimbal reflectors with 1 of rotation and at least 3 of adjustable tilt in both directions. Driver affixed to a static yoke to allow maximization of LED light engine rotation and pivot movements. OPTICS Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to W incandescent flood lamp. Wide flood beam angle at >9. CRI >9. Equivalent to W incandescent. The LED module maintains at least % light output for 3, hours. ELECTRICAL Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 1%. For compatible dimmers, refer to Compatible Dimmers Chart. INSTALLATION Suitable for installation in standard height rough-in sections. E2 socket adapter and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 2 compliance. Includes three friction clips to ensure easy installation. LISTINGS CSA certified to US and Canadian safety standards. ENERGY STAR certified; California T2 compliant. Damp location listed. WARRANTY -year limited warranty. Complete warranty terms located at Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 2 C. Specifications subject to change without notice. Type G1 IC/Non-IC Retrofit Gimbal DIMMABLE Specifications Aperture: 2-/1 (.1) Ceiling opening: as rough-in Length: 3-/ (9.9) Height: (1.2) Overlap trim: -1/ (13.2) All dimensions are inches (centimeters) unless otherwise indicated. -1/ (13.2) 2-/1 (.1) 3-/ (9.9) (1.2) 3 E2 Adaptor (included) Hardwire Kit (included) ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: G1MW LED 2K 9CRI L3LED T2 G1 LED Series/Finish Lamp CCT/CRI/W/Lumens 2 Voltage Options G1 " Gimbal MW Matte white LED (blank) 3K/3CRI/.9W/3L (blank) 12V L3LED T2 IC/Non-IC rated, new construction module MB Matte black 1 2K 9CRI 2K/91CRI/.3W/L rough-in LED base BN Brush nickel 1 3K 9CRI 3K/93CRI/.W/L L3RLED T2 IC/Non-IC rated, remodel rough-in LED base ORB Oil-rubbed bronze 1 K 9CRI K/9CRI/W/L L3 IC/Non-IC rated, new construction rough-in 3, L3R IC/Non-IC rated, remodel rough-in 3, Notes 1 Available in 3K 3CRI only. 2 Total system delivered lumens. 3 Must be ordered on a separate line. To install LED Gimbal, remove socket and assembly leaving socket wires. Install using hardwire kit provided. DOWNLIGHTING G1 LED 9CRI GIMBAL G1 " LED Gimbal Module G1 " LED Gimbal Module PHOTOMETRICS Distribution Curve Distribution Data Output Data C Illuminance Data at 3 Above Floor for a Single Luminaire Reflected Ceiling Plan - Lighting G1MW LED K 9CRI, K LEDs, input watts:.9, delivered lumens: 2, LM/W=2., test no. LTL23, tested in accordance with IESNA LM G1MW LED 3K 9CRI, 3 K LEDs, input watts:., delivered lumens: 21, LM/W=, test no. LTL2, tested in accordance with IESNA LM G1MW LED 2K 9CRI, 2 K LEDs, input watts:.3, delivered lumens:, LM/W = 9, test no. LTL23, tested in accordance with IESNA LM CP Summary Ave Ave Lumens Lumens Coefficients of Utilization pf 2% pc % % % pw %%3% %3%1% %3%1% RCR Zone Lumens % La mp *1. ency Zone Lumens % Lamp *1. ency Lumens watts.2. LPW CRI Color Temp 2 3 Minimum Starting Temp F (-1 C) F (-1 C) F (-1 C) EMI/RFI FCC Title CFR, Part 1, Class A FCC Title CFR, Part 1, Class A FCC Title CFR, Part 1, Class A Min. Power Factor... C oe ents of Ut ilization f p % 2 pc % % % pw % 3% 1% % 3% 1% % 3% 1% C oe ents of Ut ilization f p % 2 pc % % % pw % 3% 1% % 3% 1% % 3% 1% Input current.a.a.a RC R RC R Zonal Lumen Summary Zone Lumens % Lamp % Fixture % beam % beam Inital FC Mounting C enter Height B eam Diameter FC Di ameter FC % beam % beam - 1. Inital FC Mounting C enter Height B eam Diameter FC Di ameter FC G1 LED 9CRI GIMBAL G1 LED 9CRI GIMBAL DOWNLIGHTING : One Lithonia Way, Conyers, GA Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 1/2/1 DOWNLIGHTING : One Lithonia Way, Conyers, GA Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 1/2/1

Heating and Cooling Systems for Large Buildings: Summary Chart Give Special Consideration to the Systems Indicted if You Want to: Chiller Location Boiler Location Variable air Volume (VAV) [page 1]

Volume (Cave) Reheat [page 11] Multi-zone with Reheat [page 11] Air Water Induction [page 12] Fan-Coil Terminals or Unit Ventilators [page 1] Closed-Loop Heat Pumps [page 1] No Chiller Hydronic

Mass Cooling [page 22] Evaporative Cooling [page 231] No Chiller No Chiller No Chiller No Chiller No Chiller No boiler No Boiler No Boiler No Boiler Not Applicable Required?

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No Cooling Tower No Cooling Tower No Cooling Tower No Cooling Tower Distribution Type Ducts Ducts Ducts Ducts Ducts Ducts Ducts Pipes and Ducts Pipes

Maximize Control of air Velocity and Energy consumption Maximize Individual Control over Temperature Minimize System Noise Minimize Visual Obtrusiveness Maximize Flexibility of Rental Space Minimize

Diffusers VAV Box above Dropped Ceiling Ducts to VAV box to Diffusers VAV Box above Dropped Ceiling Ducts to Diffusers Ducts to Diffusers Ducts to Diffusers Diffusers in Ceiling, Wall, or Floor

9 Heating and Cooling Systems for Large Buildings: Summary Chart Give Special Consideration to the Systems Indicted if You Want to: Chiller Location Boiler Location Variable air Volume (VAV) [page 1] Variable air Volume (VAV) Reheat [page 19] Variable air Volume (VAV) Induction [page 19] Dual-duct Variable air Volume (VAV) [page 19] Single Duct Constant air Volume (CAV) [page 1] Constant air Volume (Cave) Reheat [page 11] Multi-zone with Reheat [page 11] Air Water Induction [page 12] Fan-Coil Terminals or Unit Ventilators [page 1] Closed-Loop Heat Pumps [page 1] No Chiller Hydronic Convectors (heating only) [page 1] No Chiller-- Heating Only Packaged Terminal Units or Through-the-Wall Units [page 1] Passive Solar Heating [page 222] Natural Ventilation cooling [page 22] Thermal Mass Cooling [page 22] Evaporative Cooling [page 231] No Chiller No Chiller No Chiller No Chiller No Chiller No boiler No Boiler No Boiler No Boiler Not Applicable Required? Yes Yes Yes Yes Yes Yes Yes Yes No No No No No Fan No Fan No Fan No Fan Cooling Tower Required? Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No Cooling Tower No Cooling Tower No Cooling Tower No Cooling Tower Distribution Type Ducts Ducts Ducts Ducts Ducts Ducts Ducts Pipes and Ducts Pipes Pipes Pipes None Not applicable Not applicable Not applicable No boiler Return air Delivery System Location of Delivery Unit Minimize First Cost Minimize Operating Cost and Energy Consumption Maximize Control of air Velocity and Energy consumption Maximize Individual Control over Temperature Minimize System Noise Minimize Visual Obtrusiveness Maximize Flexibility of Rental Space Minimize Floor Space Used for the Heating and Cooling Systems Ducts to VAV box to Diffusers VAV Box above Dropped Ceiling Ducts to VAV box to Diffusers VAV Box above Dropped Ceiling Ducts to VAV box to Diffusers VAV Box above Dropped Ceiling Ducts to VAV box to Diffusers VAV Box above Dropped Ceiling Ducts to Diffusers Ducts to Diffusers Ducts to Diffusers Diffusers in Ceiling, Wall, or Floor Diffusers in Ceiling, Wall, or Floor Diffusers in Ceiling, Wall, or Floor Exhaust Fan to Outdoors Ducts to Induction Unit Usually above Ceiling, but Wall & Closets also Return Grill on FCU Ducts to Diffusers Usually above Ceiling, but Wall & Closets also Return Ducts or Plenum Part of Unit, or Ducts to Diffusers Usually above Ceiling, but Wall & Closets also Part of Unit Part of Unit Not applicable Not applicable Not applicable Not applicable Part of Unit Part of Unit Not applicable Not applicable Not applicable Not applicable Floor Through the Wall or Window Passive Systems Not applicable Not applicable Not applicable Not applicable Lighting Calculations Step Calculation 1 Examine the Architectural Objectives Space is an Auditorium and needs lower lighting levels Classroom is x ft., with 1 ft ceilings; Wall and ceiling reflectivity is % 2 Explore the Opportunities for Daylighting Auditorium generally needs darknerss from any openings 3 Determine the Task Lighting Levels 1 foot-candles 3 inches above floor Select and Appropriate Lighting Source LED fixtures Choose Lighting Type Downlights, because ceiling and walls are non-reflective Select Fixtures Lithonia LED adjustable led gimbal, Model g1, lumens, watt input Determine the Number of Fixtures Required round up to1 a Calculate Room Cavity Ratio (RCR) RCR = 2. * Cavity Height * Perimeter / Floor Area Room area (ft 2 ) = 3 Room perimeter (ft) = 22 Cavity Height (ft) = 1 RCR = 2.93 b Look up CU on Lithonia Website for % reflectiviety, and RCR of 3. %!" Estimate Maintenance Factor #$% Number of Required Fixtures d Round-off Number of Fixturres &' Calculate Lighting Output (Lumens), 9 Calculate Energy Consumption (kwh).93 &$ Calulcate Efficacy (Lumens / Watt).2 Minimize Floor-to-Floor Height Minimize System Maintenance Avoid Having a Chimney a b b b b b b b b b b b Maximize the Speed of Construction Based on the Architect's Studio Companion, Rules of Thumb for Preliminary Design, by Edward Allen and Joseph Iano. Page numbers in [brackets] reference the th Edition Frequently Used Less Frequently Used a Condensing Boilers do not require traditional chimneys Chiller Selection and system selection Lighting calculation Copyright 2 Carrier Corporation Product Data 1TJ Single-Effect, Steam Hermetic Absorption Liquid Chiller 1 to Nominal Tons Carrier-Sanyo s 1TJ single-effect hermetic absorption liquid chiller is an efficient and functional alternative to traditional electric driven chillers. The 1TJ absorption chiller uses lowpressure steam as its energy source; as it eliminates the need for high cost electricity, it may qualify for financial incentives as a gas cooling product. The 1TJ absorption chiller offers functional flexibility in a variety of installations: no CFCs; environmentally sound single stage design for simple, dependable operation high reliability with few moving parts nominal full-load steam rate of 1.2 lb/hr-ton quiet, vibration-free operation Direct Digital Controls (DDC) for optimum chiller performance Features/Benefits Single-effect absorption cycle provides efficient, economical water chilling with minimal use of electricity. Cost-effective cooling Alternative-energy chiller The 1TJ chiller is a so lution for building owners who want to avoid high operating costs associated with electric driven chillers. Powered by low-pressure steam, the Carrier-Sanyo 1TJ absorption chiller reduces or eliminates electric demand and/or ratchet charges while allowing the owner to take advantage of gas cooling incentives when offered by local utility companies. Form 1TJ-1PD Physical data UNIT 1TJ NOMINAL COOLING CAPACITY (ton) RIGGING WEIGHT (lb),, 9, 1,2 12, OPERATING WEIGHT (lb), 9,1 11,1 11, 1,2 LITHIUM BROMIDE SOLUTION CHARGE (lb) 9 1,2 1,3 1, REFRIGERANT (WATER) CHARGE (lb) CHILLED WATER Pipe Connection Size (in.) No. of Passes COOLING WATER Pipe Connection Size (in.) No. of Passes Absorber Condenser STEAM Pipe Connection Size (in.) Steam Inlet Drain Outlet UNIT 1TJ NOMINAL COOLING CAPACITY (ton) RIGGING WEIGHT (lb) 12, 1, 1, 19, 2,1 OPERATING WEIGHT (lb) 1, 1,2 1,1 22,3 23,2 LITHIUM BROMIDE SOLUTION CHARGE (lb) 1,9 2,1 2, 2, 2, REFRIGERANT (WATER) CHARGE (lb) CHILLED WATER Pipe Connection Size (in.) No. of Passes COOLING WATER Pipe Connection Size (in.) No. of Passes Absorber Condenser STEAM Pipe Connection Size (in.) Steam Inlet Drain Outlet UNIT 1TJ NOMINAL COOLING CAPACITY (ton) 3 RIGGING WEIGHT (lb) 23,2 23,9, 3,1 3, OPERATING WEIGHT (lb) 2, 2,1 3, 1,, LITHIUM BROMIDE SOLUTION CHARGE (lb) 3, 3,,2,,2 REFRIGERANT (WATER) CHARGE (lb) CHILLED WATER Pipe Connection Size (in.) No. of Passes COOLING WATER Pipe Connection Size (in.) No. of Passes Absorber Condenser STEAM Pipe Connection Size (in.) Steam Inlet Drain Outlet Cooling Water Outlet Chilled Water Outlet Chilled Water Inlet Evaporator Absorber 1TJ ABSORPTION CHILLER COOLING CYCLE Refrigerant Pump Condenser Absorbent Pump Generator Cooling Water Inlet Heat Exchanger Purge Pump Steam Inlet Steam Drain Reclaimer Steam Drain Outlet Peerless Boilers Peerless PUREFIRE High Efficiency Condensing Commercial Gas Boilers 1 Supply / Return Pipes 2 Boiler Status Display 3 Blower 12V Service Outlet (PF-9) PF-9 & PF- NEW SIZE AVAILABLE Top Vent Connections (PF-9) Rear Vent Connection (PF- PF-1) Service Switch Up to 9.% Thermal Efficiency Gas-fired Condensing Boiler for Natural or LP Gas With Addition of LWCO, Boilers are CSD-1 Compliant Direct-vent/Sealed Combustion or Indoor Air Fully Modulating Burner with Maximum 1 to 1 Turndown* ETL Certified for U.S. and Canada Environmentally Friendly LoNOx Operation Sleek, Modern Design with Easy Access to Controls Compact; Small Footprint Cascade Capable up to 1 Boilers MODBUS Communications, Standard BACnet/LonWorks (optional) Unique Design Allows Common Venting of Multiple Boilers* *PF- PF-1 Reliable Dual Flame Sensors 9 Condensate System with Neutralizer 1 Leveling Legs 11 Gas Valve Visit PeerlessBoilers.com for complete details on standard and extended warranty programs available. 1 Turn the PF-9 into a PFW-9 large volume, hot water supply boiler with our new simple conversion kit! See your local dealer for more information Gas Inlet 13 Air Inlet 1 Air Inlet Plenum (PF-1) PF- PF CONTROLS Carton Dimensions & Shipping Weights Boiler Model Number Length Width Height Boiler Ratings Boiler Model Number PF- PF-1 Printed on Recycled Paper Approximate Shipping Weight (lbs.) PF-9 2" " " 2 PF- 2" " " 2 PF- -1/2" " 2" 3 PF-1-1/2" " 2" PF-1 9-1/2" " 2" 9 Dimensions Boiler Dimensions Model Number A B C D E F G H J K L PF-9 2-1/1" 1-3/1" -1/2" 1-1/2" " 3/" 2-3/" -1/" 3-1/2" -3/" -1/" PF- 2-1/1" 1-3/1" -1/2" 1-1/2" " 3/" 2-3/" -1/" 3-1/2" -3/" -1/" PF- 3-1/" 2-1/2" " 2" " 1-1/" 3-3/" -1/" PF-1-1/" 2-1/2" " 2" " 1-1/" 3-3/" -1/" PF-1-3/" 2-1/2" " 2-1/2" " 1-1/2" -1/2" -1/2" PUREFIRE Gas Series Input Gross Net Water Thermal Minimum Maximum Output² Ratings¹ Efficiency² MBH kw MBH kw MBH kw MBH kw % PF % PF % PF % PF , % PF ,. 1, 2.3 1, % Note: Consult factory before selecting a boiler for installations having unusual piping and pickup requirements, such as intermittent system operation, extensive piping systems, etc. 1 Net water ratings are based on an allowance of Gross Output and Thermal Efficiency are in accordance with BTS 2 TESTING STANDARD FOR HEATING BOILERS. Standard Equipment > Built-in Condensate Neutralizer System with Float Switch Protection > State-of-the-Art Control Board with Advanced Features > High Grade Stainless Steel Burner and Heat Exchanger PeerlessBoilers.com Technical Information > Outdoor Reset Capability > Domestic Hot Water Priority > PVC Screened Air Intake and Exhaust > Combination Temperature-Pressure Gauge and 3 PSIG Relief Valve PF-9 & PF- CUT-PFC R (/1-M) Printed in U.S.A. 21 PB Heat, LLC. All rights reserved. Site plan 1/ =1 Boiler Selection

10 HVAC plan

11 Sectional perspectives

4 LED Recessed Adjustable. Energy efficient, stylish downlighting for residential and commercial applications

4 LED Recessed Adjustable. Energy efficient, stylish downlighting for residential and commercial applications 4 LED Recessed Adjustable Energy efficient, stylish downlighting for residential and commercial applications The most efficient, stylish, high-performance downlight is now adjustable Juno Generation 4