The paper machine is constituted by equipment manufactured by the following companies:
|
|
- Johnathan Gordon
- 6 years ago
- Views:
Transcription
1 1) PAPER MACHINE The paper machine is constituted by equipment manufactured by the following companies: Based on following project data: - CARCANO KMW - OMMA - DE PRETTO-ESCHER-WYSS - VOITH - VALMET COMO - SONOTEC - Effective width 3800 mm - Weight range gsm - Machine speed 600 m/min - Production 130 t/d We have started with a Voith paper machine built in 1932 that we bought from Cartiere Sottrici Binda, Besozzo mill. As first and immediate step, the whole press section and the fourdrinier have been replaced. As second step, we have replaced the drying rolls, the headbox and the reel. Today, of the original machine, only the shoulders of the pre-drying section and some wire rolls remain. The drive arrangement of the machine has been partially recovered from Besozzo s machine, but later on it has been almost completely replaced. Steam system and hood were made new in 1992/93 and then again upgraded and modified in subsequent years. 4.1) HEAD BOX AND FOURDRINIER Headbox: by Valmet como, installed in Output width 4050 mm and 150 t/d production. Fourdriner: by OMMA, year 1992, in stainless steel and carbon steel lined with stainless steel sheet. Length mm, width 4200 mm. Upgraded by Valmet Como in 2001: the wire roll has been modified from stationary into swiveling and the pick up press has been modified into stationary. The suction roll, bought from Cartiera del Garda in 1992, is Carcano and has 762 mm diameter. 1
2 Picture n 28 Valmet headbox 4.2) PRESS SECTION Picture n 29 Fourdrinier Originally, the first press was a pick up assembly from Carcano with suction press roll dia. 812 and granite counter roll dia. 875 mm. In 2001 it has been upgraded by Valmet Como. 2
3 This press was bought originally from Cartiera del Garda in The second press was bought new in 1992 from De Pretto Escher-Wyss and it is constituted by a Nipco roll dia. 545 mm and by a 955 mm dia cylinder. From our data, we can say that dryness at the presses outlet was between 45 and 48 %. In the area under the first press and the wire roll there is the vat for the wet trimmings. The vat is in concrete lined with stainless steel sheet. The horizontal axes agitator is by Omma and it is complete of drive arrangement by motor and reducer. Picture n 30 Suction roll 1 st suction press 3
4 Picture n 31 2nd press with Nipco roll DP-EW Picture n 32 2 nd press hydraulic station (Nipco) DP-EW 4
5 4.3) PRE- AND POST-DRYING SECTION, SIZE-PRESS The drying section was rebuilt in 1995 by Valmet Como and is constituted by pre- and post-drying sections. The pre-drying section includes 17 drying rolls dia mm, face 3950 mm, operating pressure 4,9 bar (Valmet Como). The pre-drying section is divided into 3 batteries, the first one is unirun type, the second and the third have top and bottom wires. The drying section shoulders have never been replaced but they have been reinforced. The post-drying section was also rebuilt in 1995 and it is formed by 10 drying rolls dia mm, face 3950 mm, operating pressure 4,9 bar (Valmet Como). The first 2 dryers after the size press are Teflon coated and have no drying wire. The rest of the driers form a battery with two wires, top and bottom. The tail threading is performed by ropes. The groove for the ropes on the dryers is on the shell and not on the free pulley. In the end part of the post-drying section there is a Sonotec tail cutter (its operation to be verified). The drive arrangement of the drying batteries is by sectional motors and gears on the last driers of each battery. Because of the breakage of the toothed wheel of the 4 th battery (post-size dryers), CVR has eliminated the pertaining drive and has moved the two driers from the ropes of the rope run inserting them into the loop of the 5 th battery. Of course, the drive of the 4 th battery must be reassembled as per its original arrangement. The drying section is equipped with centralized lubrication system (Safematic) for the bearings supports, with single adjustment of the flows and alarm for lack of flow. picture n 33 Pre-drying section The size press was manufactured by Sonotec recovering the existing press rolls of the Voith machine of Besozzo mill, which rubber covering has been replaced. 5
6 Both the rolls are driven. Under the size-press there is no broke pulper, so the broke and the tail falling under the machine must be manually removed. In case of breakage of the sheet at the size press, it is necessary to thread the tail from the wire section. Picture n 34 Sonotec Size-press Picture n 35 Post-drying section 6
7 Pre and post-drying sections and size press are equipped with: # 1 open hood on the size press approx. dimensions 3 x 7 4,65 mt. # 1 closed hood thermo insulated on pre- and post-drying sections Approx.. dimensions: Pre-drying s. 18,5 x 7 x 4,6 Post-drying s. 8,5 x 7 x 4,65 Covering of the under the machine area appr. dim. 27 x 10 x 3,35 on three sides. Exhaust suction system, ventilation system in drying section, pre-heating coils, heat exchanger 1400 sqm. Room air ventilation Suspended ceilings system by aluminum corrugated metal sheet under hood lightning plant. The tube heat exchangers for hood ventilation require important cleaning operations. STEAM CONDENSATE, SATURATION AND MEASUREMENT SYSTEM Manufacturer: LANGBEIN ENGELBRACHT Including: Pumps Exchangers Electronic adjustments The control panel of the steam system is located in the control room. The instrumentation seems in god conditions. Supplier suggests to replace the membrane elements of the actuators and to check the regulations of the valves. 4.4) CALENDER, QUALITY CONTROL AND REEL Le calender was bought in 1992 from De Pretto Escher-Wyss; it is equipped with a Nipco roll dia. 500 mm and with an Equiterm roll dia. 660 mm. The hydraulic unit and the thermal unit of the calender are located in the basement under the machine. Also the driving motor of the top roll must be replaced. After the calender there are the fault detection system and the bridge measurement system (ABB) for the weight range and dryness with radio isotopes at low intensity (complying with safety rules, see report of Prof. Castello, qualified expert from the University of Genoa). The reel, manufactured by Valmet Como, was installed in Automatic type with spools parking. Equipped with 5 reel spools dia. 400 mm and dual joint. At the end part of the dying section, close to the reel, there is the broke pulper. The vat is Sonotec construction, the rotating unit is by De Pretto Escher-Wyss. Including drive arrangement by gearbox and motor. The two Nipco rolls and related machines (2 nd press and calender) are controlled by dedicated PLC. The reel is controlled by dedicated PLC. 7
8 Picture n 36 Calender with Nipco roll DP-EW 8
9 Picture n 37 Valmet reel Picture n 38 Control panel 9
10 5) REWINDER AND LOGS PACKAGING SYSTEM Le rewinder is located in front of the reel and the spools transfer from the machine to the unwinder is performed by bridge crane (15 tons capacity). 5.1) REWINDER Jagenberg rewinder type Vari Step TR 43 having effective trimmed width 3800 mm, max. speed 2000 mpm, 10 blades, max. dia. at inlet 2400 mm, max. dia. at outlet 1525 mm, complete of unwinder and devices for the complete control by PLC. Drive arrangement by Siemens, constituted by 3 motors in CC of which one is regenerative brake having 135 kw for the unwinder and two having each 120 kw for the drums. Draw adjustment by weighing cells. Trimming suction system with fan-tearing unit by IM-CO, compacting unit and separator located in the raw materials shed. By a pipe deviation, it is possible to send the trimmings to the broke pulper. The system has been bought new in Special fans for electrostatic discharge have been installed. Picture n 39 Jagenberg rewinder 10
11 5.2) LOGS PACKAGING The system was bought in 1993 from Sicma and includes a system by flappers to control the logs discharge and a rotating platform for winding with plastic film. A belt conveyor is installed at the inlet and at the outlet, for logs handling. A the end of the second conveyor there is an ejector pushing the packed logs in the picking up area, where they are picked by forklifts equipped with grippers. The plastic film winder is by Fis Impianti. Picture n 40 Packing system by Sicma/Fis Picture n 41 Packing system 11
ITEM No TPD 4,0 m PM for graphic papers
ITEM No. 5-130 TPD 4,0 m PM for graphic papers 1. General information Location Europe Status of the PM Stopped in 2011, completely assembled, in very good mechanical conditions (repair of some parts required)
More informationTWO PAPER MACHINES 8500mm Reel Width
TWO PAPER MACHINES 8500mm Reel Width These machines will only be sold for the production of brown grade papers. Mill voltage is 525 volts and incoming voltage is 10,000 volts, 3phase and 50 cycles. Number
More informationRECYCLED CARTONBOARD MILL. May 2009
SPECIFICATIONS OF RECYCLED CARTONBOARD MILL May 2009 MAIN DETAILS: RECYCLED TRIPLEX. COATED CARTONBOARD Trim width: 2.180 mm. Working speed: 50-220 mpm Basis weight range: 150-650 g/m2 Production: 45.000
More informationPAPER MILL MANUFACTURER OF SEVERAL TYPES OF BOARDS AND PACKAGING GRADES
PAPER MILL MANUFACTURER OF SEVERAL TYPES OF BOARDS AND PACKAGING GRADES The paper mill produces papers and boards made with wood pulp and with recycled fibers. Production includes file folder grades and
More informationItem No.16. The Corrugating plant is no longer part of the paper mill.
Item No.16 1. General information The Swiss owned company Bell has been erecting, installing and starting paper machinery up as new since 1965 and to date many reconstructions have been performed. The
More informationFollum Mill Hønefoss Norway. Two TMP Plants, Three Paper Machines and Converting Equipment
Follum Mill Hønefoss Norway Two TMP Plants, Three Paper Machines and Converting Equipment Please note the paper machines can only be sold in parts and not as complete papermaking machines. TMP1 Year 1981
More informationPaper Machine N 4, 1530mm Deckle
Paper Machine N 4, 1530mm Deckle Paper Machine for fine and coloured papers, art and security papers Drive is on the left from flow-box, deckle is 1530 mm, speed 210 m/mn, grammage 70 to 450 gsm and production
More informationJohn Wilkie Paper Mill Services Ltd
Knauf Danogips GmbH Inland Kartongbruk Inland Kartongbruk is located at Lilla Edet in Sweden, north of Gothenburg. The nearest airports are Gothenburg. Maps are available showing the mill location. The
More informationfolding boxboard, GT, GD, Tesliner I, II, III, Chipboard, Tube board Substance: g/m tpd ( tons/year)
OFFER FOR SECOND-HAND EQUIPMENT: COATED BOARD MACHINE General information: Products: folding boxboard, GT, GD, Tesliner I, II, III, Chipboard, Tube board Substance: 140 650 g/m 2 Capacity: 80 100 tpd (25
More informationSWASTIK ESTABLISHED 1937 KNIT FABRIC COMPACTORS SWASTIK TEXTILE ENGINEERS PVT. LTD.
SWASTIK ESTABLISHED 1937 KNIT FABRIC COMPACTORS SWASTIK TEXTILE ENGINEERS PVT. LTD. Swastik Premises, Amraiwadi, Ahmedabad - 380 026. INDIA Tel. : (+91)(79) 6543 5017, 2274 3553, 2274 9068, 2274 8551,
More informationEvolution of OptiConcept Entering a
Entering a New Era Executive Summary The OptiConcept launch in 1999 introduced groundbreaking technology in machine efficiency, availability and industrial design all factors that have had a great impact
More information2 x Paper Making Lines for producing liner and white top paper 4TPH De-Inking line. Online Auction. Sale Closes from 12 noon, Wednesday 14th November
MAJOR ASSET DISPOSAL Instructed by the new owners of Hollins Paper Mill PRIVATE TREATY SALE 2 paper making lines 2 x Paper Making Lines for producing liner and white top paper 4TPH De-Inking line Voith
More informationTecnoClean Coatings. Benefits
TecnoClean Coatings Non Stick / Good Release Coatings Targets Dryers, usually made in the paper machine Dryer fabric rolls Paper guide (lead) rolls, usually made in work shop Cooling cylinders Work description
More informationCOMPLETE LINE FOR NON SINTERED PTFE TAPE. 1-Mixing tumbler
COMPLETE LINE FOR NON SINTERED PTFE TAPE 1-Mixing tumbler This machine is used for mixing powders and additives to obtain after a certain amount of time, an amalgamated product with a pasty consistency.
More informationJohn Wilkie Paper Mill Services Ltd. Paper machine R1
Tullis Russell Papermakers Ltd (In Administration) By Order of Blair Nimmo and Tony Friar of KPMG LLP Joint Administrators For sale by Private Treaty Roll grinding Farrel roll grinder for grinding all
More informationPaper machine dryer sections. Technology solutions for every need
Paper machine dryer sections Technology solutions for every need Paper grade features influenced through the dryer section Metso Paper has great experience in developing and supplying dryer sections for
More informationThe 1970 s and 1980 s were a booming time in the
Upgrade Considerations for Older Lightweight Paper Machines Increasing an older machine s speed and efficiency may be just an upgrade away. By Craig Shaver The 1970 s and 1980 s were a booming time in
More informationChE 441: Paper Manufacture
ChE 441: Paper Manufacture Lecture # 13 by Kazi Bayzid Kabir Introduction Paper consists of a web of pulp fibers usually formed from an aqueous slurry on a wire or screen, and held together by hydrogen
More informationPAPER INDUSTRY PROCESS DESCRIPTION
PAPER INDUSTRY PROCESS DESCRIPTION Paper Industry PROCESS DESCRIPTION SUMMARY- PART 1. PAPER PASTE GENERATION 1. Raw material 2. First paper separation 3. Second paper separation 2 Paper Industry PROCESS
More informationMadison Paper Industries
Complete 550,000 sq ft Paper Mill Across 12 Acres Madison Paper Industries 1 Main Street, Madison, Maine 7.2M 1,387 MPM METSO SW800 SCANNER 37-59 GSM VALMET PAPER MACHINE Upgraded 2012 Auction: Ends Tuesday
More informationMfg For : FOIL, PAPER & FLEXIBLE PACKAGING MACHINERY
Mfg For : FOIL, PAPER & FLEXIBLE PACKAGING MACHINERY Shed No. 2708/A/1, G.I.D.C Phase - 4, Nr. Shri Ram Ice Factory, B/S Gayatri We Bridge, Vatva, Ahmedabad- 382445 Guj. (India) M.: +91 7405528044, 9638608123
More informationTechnical Description. DT Laboratory Calender
Technical Description DT Laboratory Calender 1. GENERAL 2. DESCRIPTION OF THE MAIN UNITS 2.1 Calender Unit 2.1.1 Backing roll 2.1.1.1 Supercalendering 2.1.1.2 Softcalendering 2.1.2 Hot roll 2.2 Functional
More informationMARUTI ENGINEERING WORKS
MARUTI ENGINEERING WORKS 940-KATARGAM G.I.D.C, ASHWINIKUMAR ROAD, KATARGAM, SURAT-395004 (GUJARAT) MO.:- (0) 98790 51244 E-MAIL:-dharmesh_mech2008@yahoo.co.in About Us: Established in the year2010, Maruti
More informationHakki Pilke Raven spare parts manual
1 ENGLISH Hakki Pilke Raven spare parts manual Valimotie 1, FI-85800 Haapajärvi, FINLAND Tel. +358 8 772 7300, Fax +358 8 772 732 info@maaselankone.fi, www.maaselankone.fi 2 Table of contents 1 Upper section
More informationPUMPKIN SEED HARVESTING TECHNOLOGY 2019
PUMPKIN SEED HARVESTING TECHNOLOGY 2019 Moty GmbH Piesing 20, AT 4846 Redlham office@moty.at www.moty.at Engineering changes, literal mistakes and prices are subjects to change Your reliable partner for
More informationPLASMAC Ltd. Units 11&12 Aylesbury Business Centre Chamberlain Road Aylesbury Bucks. HP19 8DY. UK
PLASMAC Ltd. Units 11&12 Aylesbury Business Centre Chamberlain Road Aylesbury Bucks. HP19 8DY. UK Phone +44 (0)1296 398 698 Fax +44 (0)1296 395 110 Web www.plasmac.co.uk E-Mail sales@plasmac.co.uk Plasmac
More informationPELLET MILL. developed properly for pellet production and all technologies and mechanical solutions are chosen to
PELLET MILL N-ECO pellet mill machine is projected and manufactured in accordance with CE norm about construction s prescriptions and safety. With N-ECO you will save money and get lower pellet production
More informationASPHALT PLANT. AtlasTechnologiesIndia.com
ASPHALT PLANT Available as stationary and semi-mobile. VARIANTS: ABP 80 (80 tph), ABP 120 (120 tph), ABP 160 (160 tph) Capacities above 160 tph are tailor made. AtlasTechnologiesIndia.com AGGREGATE FEEDER
More informationReliability and Satisfaction
Truck Manufacturing Reliability and Satisfaction Eclipse Wireline designs and manufactures custom wireline trucks for the oil and gas industry. Product reliability, customer satisfaction, integrity, honesty,
More informationASPHALT PLANT. atlastechnologiesindia.com. MOBILE VARIANTS: MDM 45 (40-60 tph), MDM 50 (60-90 tph), MDM 60 ( tph)
ASPHALT PLANT Available as stationary and mobile. STATIONARY VARIANTS: DM 45 (40-60 tph), DM 50 (60-90 tph), DM 60 (90-120 tph) MOBILE VARIANTS: MDM 45 (40-60 tph), MDM 50 (60-90 tph), MDM 60 (90-120 tph)
More informationJethwa Automatic Can Equip. Co. An Export Award Winning ISO 9001 Quality Certified Company
200-220 LITRES DRUM BARREL PLANT MACHINES INTRODUCTION The complete range of semi-automatic machinery and equipments for producing drum barrel and buckets in various ranges for packing edible oil, paint,
More informationWe are offering subject to prior sale: PICANOL RAPIER LOOMS. Item
We are offering subject to prior sale: PICANOL RAPIER LOOMS Item 004666 22 Picanol GTM -AS looms, 1992/93, 190 cm, 4 colours, with Stäubli electronic dobby type 2612, microprocessor controlled, each loom
More informationFläkt Dryer World leading pulp drying technology We accept the challenge!
www.andritz.com Fläkt Dryer World leading pulp drying technology We accept the challenge! The Fläkt Dryer for High Quality Pulp The Fläkt Dryer is the result of expericence gained from more than 500 pulp
More informationTechnical Description
Technical Description DT Laboratory Coater KALTEC SCIENTIFIC, INC. 22425 Heslip Drive Novi, Michigan 48375-4138 t: 248.349.8100 f: 248-349-8909 1. GENERAL 2. DESCRIPTION OF THE MAIN UNITS 2.1 BLADE COATING
More informationBiomass Drum Dryer LMK 2000 Model
Biomass Drum Dryer LMK 2000 Model Drum dryer of sawdust and biomass SPB5, SPB10, SPB20, SPB30 versions The equipment is designed to dry material of vegetable and biological origin e.g. wood sawdust, wood
More informationPELLET MILL. construction s prescriptions and safety. Besides, Nova Pellet S.r.l. has obtained in 2007 the Italian
PELLET MILL N-MIDI pellet mill machine is projected and manufactured in accordance with CE norm about construction s prescriptions and safety. Besides, Nova Pellet S.r.l. has obtained in 2007 the Italian
More informationLUCART LAVAL PM10 paper machine speed up project including doctoring system replacement
1 LUCART LAVAL PM10 paper machine speed up project including doctoring system replacement Day 3 - Wednesday, 12 April 2017 MORNING SESSION: 8:50 a.m. - 1:20 p.m. 3 LUCART GROUP AT A GLANCE 319,000 Tons
More informationASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS COLD AGGREGATE FEEDER
ASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS ROAD BUILDING COLD AGGREGATE FEEDER 2 x 2 bin aggregate feeder unit is with total capacity of 20 T. Gathering cum slinger conveyor
More informationASPHALT PLANT. atlasindustries.in
ASPHALT PLANT Available as stationary and mobile. STATIONARY VARIANTS: DM 45 (40-60 tph), DM 50 (60-90 tph), DM 60 (90-120 tph) MOBILE VARIANTS: MDM 45 (40-60 tph), MDM 50 (60-90 tph), MDM 60 (90-120 tph)
More informationTOS-002-US Gear Hobbing Machine TH 350 CNC
TOS-002-US-02-2018 1 Gear Hobbing Machine TH 350 CNC 1. MAIN FEATURES Gear hobbing machine TH 350 CNC is numeric controlled machine with seven CNC controlled axis designed for high speed hobbing of spur
More informationDM 45 (40-60 TPH) ASPHALT DRUM MIX PLANT - DM 50 (60-90 TPH) I TECHNICAL SPECIFICATIONS DM 60 ( TPH) COLD AGGREGATE FEEDER.
DM 45 (40-60 TPH) ASPHALT DRUM MIX PLANT - DM 50 (60-90 TPH) I TECHNICAL SPECIFICATIONS DM 60 (90-120 TPH) ROAD BUILDING COLD AGGREGATE FEEDER Stationary four bin cold aggregate feeder unit is with each
More informationASPHALT PLANT. atlastechnologiesindia.com. MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 ( tph)
ASPHALT PLANT Available as stationary and mobile. STATIONARY VARIANTS: DDM 45 (40-60 tph), DDM 50 (60-90 tph), DDM 60 (90-120 tph) MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 (90-120
More informationThe specification for the equipment supplied complies with the standards of INNOPLANA UMWELTTECHNIK AG and its sub-contractors.
4. LIST OF EQUIPMENT SUPPLIED The specification for the equipment supplied complies with the standards of INNOPLANA UMWELTTECHNIK AG and its sub-contractors. The item numbers sown correspond to the operating
More informationSolid biofuel solutions
Solid biofuel solutions Clean heat with locally produced fuel Solid biofuels are the individually most important component in the conversion to a sustainable energy mix. Heat production from wood based
More informationBid Specifications for Thermo-Lay model UD /4 yard truck mounted machine with hydraulic bins & roller DIMENSIONS: Body:
DIMENSIONS: Body: 142" long, 78" wide, 43" high Total Height above ground: 98" Cab to trunion required: 138" Wheel base required: 204" on Freightliner FL 70 Turning radius: 55' curb to curb on Freightliner
More informationcontinuous ribbon dyeing and finishing ranges
continuous ribbon dyeing and finishing ranges type mtf-b description Production ranges for continuous dyeing and finishing of up to 16 elastic or rigid ribbons and tapes. Produces upt to 20.000 meter per
More informationImproving press performance step by step. Sami Remmi Vice President, Rolls & Workshop Services
Improving press performance step by step Sami Remmi Vice President, Rolls & Workshop Services Improving press performance step by step Case: Thai Cane Paper PM 2, Thailand On this Shared Journey Forward,
More informationTECCON. 2,5 to 10,0 t / H Water evaporation RATE
TECCON BELT DRYER 2,5 to 10,0 t / H Water evaporation RATE Installation of belt dryer 2 TECCON belt dryer Belt dryer 2,5 to 10,0 t / H Water evaporation RATE 1 Zentrales Element im Pelletswerk Norica ist
More informationDrive Power and Torque in Paper Machine Dryers
Drive Power and Torque in Paper Machine Dryers 2 nd Edition Gregory L. Wedel President Kadant Johnson Inc. Gerald L. Timm Vice President, Research & Development Kadant Johnson Inc. Technical White Paper
More informationRunEco Vacuum Systems
Runtech Systems offers high quality availability and energy saving components Runtech Systems Oy, a highly innovative company, was founded in 1997. The companys' products and services aim to significantly
More informationTRS 292, ST ST-97
Floor cleaner 12 High pressure nozzles 292, 285 Mosmatic cleaning head TRS 297 Mosmatic floor cleaner 297 Mosmatic rotor arms 297 Mosmatic surface cleaner with air recovery system and integrated gum remover
More informationB. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes).
Guide Specifications PART 1 GENERAL 1.01 SYSTEM DESCRIPTION Microprocessor controlled, air-cooled liquid chiller utilizing scroll compressors, low sound fans, hydronic pump system and optional fluid storage
More informationModule 7: Air Supply System
Terms and Definitions Components of the Air Supply System Basic Functions of the Air Supply System Parts of a Compressor Characteristics of Compressors Loading and Unloading Process Characteristics of
More informationA/C-HEATER SYSTEM - MANUAL
A/C-HEATER SYSTEM - MANUAL 1986 Isuzu Trooper II 1986 A/C-HEATER SYSTEM Isuzu A/C-Heater Systems - Manual P UP, Trooper II * PLEASE READ THIS FIRST * CAUTION: When discharging air conditioning system,
More informationEN l JENSEN Transfer Dryer WR JENSEN Transfer Dryer WR Highest Performance with Minimal Use of Energy
EN l JENSEN Transfer Dryer WR 60 120 JENSEN Transfer Dryer WR 60 120 Highest Performance with Minimal Use of Energy WR 120 with integrated, easily accessible heat exchangers JENSEN Transfer Dryer WR 60
More informationSmart Comfort Solutions HIGH VELOCITY DRUM FANS
Smart Comfort Solutions HIGH VELOCITY DRUM FANS Direct Drive Drum Fans Direct Drive drum fans are great for heavy duty air circulation in light duty commercial applications where an economical solution
More informationPRE-BATCHER UNIT DRYER UNIT. Model: RM 350. Year of construction: Composed of:
Asphalt Plant INTRAME 350 RM Alicante, 24.10.2017 Asphalt Plant INTRAME 350 RM Offer number: A-160509-1994-01 Brand: INTRAME Model: RM 350 Capacity: 350 t/h Year of construction: 1994 Refurbished: 2004
More informationASPHALT PLANT. MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 ( tph) atlasindustries.in
ASPHALT PLANT Available as stationary and mobile. STATIONARY VARIANTS: DDM 45 (40-60 tph), DDM 50 (60-90 tph), DDM 60 (90-120 tph) MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 (90-120
More informationSingle-Felt Dryer Sections
Single-Felt Dryer Sections Gregory L. Wedel President Kadant Johnson Inc. Gerald L. Timm Vice President, Research & Development Kadant Johnson Inc. Kenneth C. Hill President Kadant Johnson Systems Division
More informationMachines for adhesive tapes
Coating and laminating lines Machines for adhesive tapes The GUZZETTI GROUP owes its constant development to precise production and marketing planning that have enabled it to be recognized internationally
More informationShort test of strength for production waste
Short test of strength for production waste High-performance shredder for the paper, packaging and corrugated board industry EN PAPER AND CORRUGATED BOARD Making short work High-performance shredders by
More informationSierra Europe SRLU Technical Specification Sierra PN2700 Baler Logger
Sierra PN2700 Baler Logger General description of the Sierra mobile or stationary 2700 baler In the world of scrap metal processing, equipment value and capability are essential to a profitable business,
More information(12) United States Patent
(12) United States Patent Demers USOO6648198B2 (10) Patent No.: (45) Date of Patent: Nov. 18, 2003 (54) VACUUM BELT CONVEYOR (75) Inventor: Sylvain Demers, St. Louis de France (CA) (73) Assignee: Voith
More informationASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS COLD AGGREGATE FEEDER. Gathering cum slinger conveyor 500 mm x 7.
ASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS ROAD BUILDING COLD AGGREGATE FEEDER 2 x 2 bin aggregate feeder unit is with total capacity of 20 T. Gathering cum slinger conveyor
More informationTechnical features. Features» Compact design» Status light» Top filled chemical unit» Automatic door lock» Galvanized chassis» Conical drum opening
TWE20 Washer extractor Drum volume Capacity Heating System Processing time Motor power Heating element power Steam consumption Extraction force Width Depth Height 204 lt 20 kg 30 kg/h Steam and/or electrical
More informationOSSBERGER Trash Rack Cleaners program:
Trash Rack Cleaner OSSBERGER Trash Rack Cleaners program: Trash rack cleaners are designed with one specific task in mind: Removal of all kinds of debris suspended in the water, entering a trash rack intake,
More informationBest warranty!! Bale chamber bearing warranty 5 years or bales.
AGRONIC Best warranty!! Bale chamber bearing warranty 5 years or 50 000 bales. AGRONIC, Finland's best selling integrated baler wrapper - now improved. The AGRONIC did not get its second R for nothing.
More information1. STANDARD CONTINUOUS LAMINATING MACHINE FOR THE PRODUCTION OF FLAT WALL PANELS
Proposal and Specification for the supply of continuous Caterpillar Laminating Press to manufacture insulated Wall and DPR Roof panels from Mineral Wool and Expanded Polystyrene (EPS) and PIR/PUR (PU BLOCK)
More informationSmart Comfort Solutions HIGH VELOCITY DRUM FANS
Smart Comfort Solutions HIGH VELOCITY DRUM FANS Direct Drive Drum Fans Direct Drive drum fans are great for heavy duty air circulation in light duty commercial applications where an economical solution
More informationTechnical description
Rail profile grinding machine NRG Technical description Nencki Ltd Railway Technology Gaswerkstrasse 27 4901 Langenthal Switzerland Tel. +41 62 919 93 93 Fax +41 62 919 93 90 railway@nencki.ch www.nencki.ch
More informationOCEANO BOTTLE WASHER
OCEANO BOTTLE WASHER OCEANO In the effort to reduce the environmental impact of waste from industrial production, there is an increasingly deeplyfelt need to recover empty containers, such as glass or
More informationCAUTION. Machine: SHRINK LABEL AUTOMATIC APLICATOR. Model: SLEEVEPRO 450AB. Input Voltage: 400 VAC, 3PH, 50Hz. Contact:
CAUTION Read carefully all the instructions of this manual before start any operation on this machine. Do not put your hands close to any moving part of the machine. Do not make any adjustment when the
More informationPneumatic Pumps and Diaphragm Pumps. pneumato Pneumatic Oil Pumps. Pneumatic Double Diaphragm Pump DP-60
Price recommendation without obligation Pneumatic Pumps and Diaphragm Pumps pneumato Pneumatic Oil Pumps Pressure ratios 1:1, 1:3 and 1:5, includes 2" BSP drum adaptor, item does not include further accessories.
More informationSR10. Rotative blowing for large mass productionof packagings from 0,1 L to 0,75 L
SR10 Rotative blowing for large mass productionof packagings from 0,1 L to 0,75 L SR10 PRODUCTION : Maxi Dimensions : Closing force : 0,7 T Volume : 750 cm3 Height : 195 mm Diameter : 100 mm MAXIMUM USUAL
More informationMIXER TYPE MAZ-550/CD
MIXER TYPE MAZ-550/CD Atmospheric version (no vacuum) Capacity: 550 lt. 2 blades ZZ C/1, fixed speed scraping inner wall. Double jacketed vessel for water recirculation. Dumping vessel. Full cover hydraulic
More informationAir Flow Technology and Paper Waste Disposal Systems. for the paper industry PAPER AND CORRUGATED BOARD
Air Flow Technology and Paper Waste Disposal Systems for the paper industry EN PAPER AND CORRUGATED BOARD competing in the real world Today s business has to excel in a world that is just as competitive
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 233423 - HVAC POWER VENTILATORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 PERFORMANCE REQUIREMENTS A. Operating
More informationRotary Die-cut System RD series. RD series. Rotary Die-cut System RD-4055 / RD-4055DM / RD Simple, high quality, compact rotary Die-cut system.
Rotary Die-cut System RD series RD series Rotary Die-cut System / DM / RD-3346 Simple, high quality, compact rotary Die-cut system. Improve your die cutting process! Quick, easy change over and simple
More informationTender No. B1 Two Stage Continuous Bleaching Range (CBR)
Tender No. B1 Two Stage Continuous Bleaching Range (CBR) Machine Specification Fabric quality :100 to 350 GSM Cotton shirting & Bottom weight(avg GSM=200) Capacity : 90000mtrs per day Roller width : 2000
More informationSR4. Rotative blowing for large mass productionof packagings from 0,1 L to 1 L
SR4 Rotative blowing for large mass productionof packagings from 0,1 L to 1 L SR4 PRODUCTION : Maxi Dimensions : Closing force : 1 T Volume : 2000 cm3 Height : 320 mm Diameter : 100 mm MAXIMUM USUAL DIMENSIONS
More informationChocolate Cooling Tunnel
Chocolate Cooling Tunnel Instruction Manual AMC-CT600 AMC SYSTEM TECHNOLOGY USA, INC. 1. Equipment Application AMC cooling tunnel is mainly used for cooling food industry. Such as the chocolate,candy,biscuit,
More informationMC-V Vacuum Cleaner. Specifications are subject to change without notice for further improvement.
Order Number MAC0506027C1 Vacuum Cleaner MC-V7314-01 Specifications are subject to change without notice for further improvement. 2005 PANASONIC CONSUMER ELEC- TRONICS COMPANY, DIVISION OF PANA- SONIC
More informationPROJECT REPORT. HYT 4 Color Flexo graphic Printing Machine
RADIANCE INDIA 115 B Empire State Building, Ring Road Surat-395002 (Guj) INDIA Mobil :- 919687611676, 02616642006 Email id :-info@radianceindia.co Web site:- www.radianceindia.co PROJECT REPORT HYT 4 Color
More informationIndustrial Processing Solutions
Industrial Processing Solutions Fluid power, filtration, and roll cleaning products. Innovative products and technologies. Rotating Unions & Accessories Rotary unions for water and air service ( 3 8 to
More informationSCR ROTARY SCREW AIR COMPRESSORS
SCR ROTARY SCREW AIR COMPRESSORS WESTAIR AIR COMPRESSORS WESTAIR COMPANY PROFILE Westair was founded in 1982 as a family business and has expanded to become one of the most reputable brands in the compressed
More informationPLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.
Machinery Listings Complete Plant Benninger Seizing Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 10775 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/10775.zip
More informationTechnical Documentation G.Mondini S.p.A. Tray Sealer TRAVE-384
Tool size: 330 mm wide x 840 mm long; the number of trays per tool is calculated using actual tray dimensions and tray orientation. Sealing tool driving system and sealing force generator consist in a
More informationPresentation for SPE PAM 2016 Conference Latest Developments in underwater pelletizing David Bargery Global Project Manager
Nordson BKG Presentation for SPE PAM 2016 Conference Latest Developments in underwater pelletizing David Bargery Global Project Manager 1 Content Company Profile: Nordson BKG Company Profile: Nordson Corporation
More informationProcess Engineering Valmet As Your Drying Partner
Process Engineering Valmet As Your Drying Partner Executive Summary Valmet has acquired substantial benchmarking data on energy and machine efficiency in the drying process from decades of studies and
More informationMachines and plant for tube and profile production
Gummi Fasern Kunststoffe, No. 10, 2007, pp. 659 663 Machines and plant for tube and profile production T. Pohl and F. Podzelny Process Development, Rubber Machines and Plant, Troester GmbH & Co. KG, Hanover,
More informationANNEXURE-A SPECIFICATIONS FOR HOT MIX PLANT
ANNEXURE-A SPECIFICATIONS FOR HOT MIX PLANT COLD AGGREGATE BIN FEEDER FEEDING HOPPERS Four Nos. Cold aggregates hopper with a heaped capacity of approx. 52 T. Wide opening bin width to accommodate different
More informationDUCTED SPLIT AIR CONDITIONERS GCUN-A/GDS-A SERIES
DUCTED SPLIT AIR CONDITIONERS GCUN-A/GDS-A SERIES Range 3.6 To 36.5 Tons 50Hz R22 TABLE OF CONTENT General features Page 3 Components features Pages 3 to 5 Compressors Condensers Condenser fans Evaporators
More informationCoe Press Equipment Corporation. Power Straighteners. Coe Press Equipment Corporation. The Company That Feeds an Industry
Coe Press Equipment Corporation Power Straighteners Coe Press Equipment Corporation The Company That Feeds an Industry POWER STRAIGHTENERS 175 Series Straighteners The 175 Series of power straighteners
More informationProduct range storage technology
POTATO TECHNOLOGY BEET TECHNOLOGY VEGETABLE TECHNOLOGY Product range storage technology Gentle storing harvesting success! Only crop that is stored in a healthy condition will also be in a healthy state
More informationGroup-1 Agitators. Group-2 Air Conditioning Plant. Group-3 Air Handling Plant / Air Pressurisation System. Group-4 Belts (Conveyor, V & Wedge Belts)
Group-1 Agitators Group-2 Air Conditioning Plant Group-3 Air Handling Plant / Air Pressurisation System Group-4 Belts (Conveyor, V & Wedge Belts) Group-5 Boiler Pressure Parts / Bowl Mills Parts (Developed
More informationComplete Waste Tire Recycling Line
Complete Waste Tire Recycling Line Manufactured new in 2009 and started operation in 2010 and has less than three years in service. This line is designed to handle 1.5millon 2millon tires per year. This
More informationBALE BREAKER AND OPENERS
BALE BREAKER AND OPENERS 13 Automatic Bale Plucker is used to mechanically strip fibres from pressed bales and automatically drop the fibre on to the feed table of the opening machinery at the beginning
More informationIN THE PULP AND PAPER INDUSTRY
H E A T E X C H A N G E R S BULLETIN NO. TIS-105A PRIME SURFACE PLATE & FRAME ALL-WELDED PLATE IN THE PULP AND PAPER INDUSTRY THE heat transfer people H E A T E X C H A N G E R S 2 TRANTER BRINGS EFFICIENCY
More informationPUMPS AND PROP AGITATORS
PUMPS AND PROP AGITATORS Shown with optional telescoping legs. MAGNUM LAGOON PUMPS Balzer Magnum Lagoon Pump features the Balzer vertical positioned Super 150 Impeller, 19 horizontal prop, patented chopping
More informationPet blow Molding Machine 4KVT
Pet blow Molding Machine 4KVT 1. TECHANICAL SPECIFICATION 2. SCOPE OF SUPPLY 3. TECHANICAL SPECIFICATIONS OF EQUIPMENTS 4. ADDITIONAL FEATURES 5. MATERIAL USED APPLICATION- PET BOTTLES FOR WATER, JUICE,
More information