All Valve Industries. General Product Overview. Distributed by All Valve Industries. Ph: Fax:

Transcription

1 All Valve Industries General Product Overview Distributed by All Valve Industries Ph: Fax:

2 Manufacturer Introduction All Valve Industries has aligned itself to leading manufacturers who have a proven history of reliable products, innovative thinking, and a total commitment to quality Caleffi is the leading Italian manufacturer of high-quality components for heating, cooling and plumbing systems and a supplier of high performance hydronic solutions. This Italian company is at the heart of an international group which employs approximately 1,000 people in its various sales offices and representative branches throughout the world. The success of Caleffi is based on total quality, which depends on the quality of every single operation involved in the whole production process. Therefore, all the actions of the staff (from design through production to after-sales service) are important. In light of the vital role played by alternative energy in social responsibility and the development of market opportunities, Caleffi decided to devote its new research laboratory to the development of components for solar energy and geothermal plants using energy created to power a percentage of the office needs, among other things. The main role of the centre consists of research into enhancing products already in the catalogue and tests on standard components with an emphasis on energy-saving features and top quality. Cimberio is amongst the very first company in its field to achieve BSI Certification to BS EN ISO 9002 in 1989, which is a historical step in their overall quality strategy. Since then, Cimberio has achieved certification to ISO9001:2008, OHSAS 18001:2007, ISO 14001:2004 and SA 8000:2008 which shows their commitment to quality, ethics, environment and safety. In the year 2000, records show returned goods to have been just 0,007% of the total number of Cimberio units produced. Bearing in mind that most of these returns will be attributable to indirect causes e.g. installation defects, Cimberio can state that despite the huge number of items produced annually, their aim of zero defects has been substantially achieved. Cimberio s contribution can be summarised in just three words commitment to quality. Those who work with us, those who seek a new, higher standard for our industry can be sure of it. When a Cimberio valve is installed, everyone can relax in the knowledge that nothing will go wrong. Behind this peace of mind promise lies the history of a company which has always been dedicated to the aims of value and quality.

3 Pressure Reducing / Backflow Pressure Reducing Valves The 5335 series pressure reducing valve is specially designed for small domestic systems for example houses and units to protect water storage heaters, to reduce water hammer and to comply with AS3500 water pressure restrictions. 15mm mm Max. pressure: 1,600kPa Adj. pressure: kPa. Preset pressure: 500kPa Max. temp: 65 C. The 535 series pressure reducing valve is designed to reduce pressure in multi-dwelling and high rise buildings. It features union ends and a pressure setting indicator for easy adjustment. 15mm mm mm mm mm mm Max. pressure: 2,500kPa Adj. pressure: kPa. Preset pressure: 300kPa Max. temp: 60 C. Backflow Prevention Valves The 574 series RPZ backflow device is a plumbing protection valve designed to prevent polluted water from flowing back into the mains supply. The Caleffi RPZ features minimal head loss and excellent flow rates. 15mm mm mm mm mm mm Max. pressure: 1,000kPa Max. temp: 65 C. Filter Mesh: 0.8 mm Male Union Ends Optional no-splash tundish Designed for maximum flow The 573 vented dual check valve is suitable for use on medium hazard systems such as on underground rainwater tanks. 20mm Max. pressure: 1,000kPa Max. temp: 65 C. Filter Mesh: 0.8 mm Female Union Ends

4 Mixing Valves TMV and Tempering Valves The Caleffi 5213TM series provides water at a safe and usable temperature in situation where the control of the temperature of the water discharging from an outlet is of the utmost importance, i.e. within hospitals, schools, nursing homes, etc Adjust. Range: 30 C - 50 C Cold Inlet Temp: 5 C - 30 C Hot Inlet Temp: 55 C - 85 C Accuracy: +/- 2 C 15mm IN mm IN Max static pressure: 1400 kpa Minimum pressure: 20 kpa Max unbalanced pressure: 6:1 Min flow rate 4 L p/m The Caleffi 252 series solar TMV will be available in from 15mm - 25mm. This high performance, high flow mixing valve is able to reduce the temperature of solar hot water to a usable temperature in health care applications i.e. within hospitals, schools and nursing homes as well as larger commercial solar installations. Available late 2011 Tempering Valves are designed to protect people from scalding by hot water in domestic situations and is a legal requirement in new homes. Caleffi tempering valves are available in either a grey cap for storage hot water, or a yellow cap for high performance and solar applications where high operating temperatures or fluctuating supply conditions are common. 15mm 20mm 15mm 20mm (grey) (grey) HP (yellow) HP (yellow) BMS Temperature Monitoring All Valve Industries temperature monitoring system has been developed with leading BMS providers to electronically monitor the mixed water temperature supplied by the TMV via a calibrated temperature sensor. It was specifically designed to integrate with a clients BMS systems, thereby providing a cost efficient method of monitoring warm water temperatures without the need for separate, and expensive monitoring software. The system will automatically provide a constant temperature reading and reporting system to identify the risk in the unlikely event that a TMV should fail. Cost savings are achieved by alleviating the need for taking manual measuring temperature readings and enabling personnel to focus on other activities. 24H Monitoring Auto Logging Temp Alerts BMS Integration

5 All Valve Industries Valve Control Groups Valve Control Groups All Valve Industries offers a range of different stainless steel enclosures fully plumbed with valves, fittings and pipework ready for installation. The recessed enclosure is Australia made and is a robust quality product. The design allows for maximum space, thereby allowing for easy access and maintenance. It features a flush fitting flat clip-in lid or hinged lid with key lock to prevent unauthorised access. The valve is supported by a stainless steel bracket and a test point is standard on the mixed outlet supply. Available with a TMV or with a tempering valve. Hot In Cold In The 3 pipe enclosure is the most basic and common configuration made. It is available with the hot and cold intlets from the top for when the plumbing pipe work is brought down from the slab of the floor above, or from the bottom of the box when the pipework needs to come up from the floor. The dimensions of the 3 pipe box is 300x300mm TOP ENTRY 15mm SS521312T 20mm SS521319T BOTTOM ENTRY 15mm SS521312B 20mm SS521319B Mixed Out Hot In Cold In The bypass feature in a valve control group allows the cold water be isolated and locked away in a convenient location should the need arise for maintenance in the bathroom or other ablutionary area. TOP ENTRY 15mm SSBPC521312T 20mm SSBPC521319T BOTTOM ENTRY The top entry inlet as shown to the left is available in a 300x300mm box, whereas the bottom inlet configuration is a 350x350mm enclosure. 15mm 20mm SSBPC521312B SSBPC521319B Mixed Out Cold Out Custom configurations available for projects Enclosure Options The stainless steel enclosure, pipework and fittings are all made in Australia. This means that there is complete control over the production process and enables us to offer an excellent variety of options as well as a quick turn around time. Some of the options we offer are; - Powder coated lids to Dulux colour range - Hinged lid or flat clip-in lid - Identification plates for easy valve identification

6 Balancing Valves Manual Balancing Valves Cim 787series variable orifice balancing valve is suitable for flow control in heating or cooling systems. These valves are usually installed on the return line to regulate the flow thus achieving balance between the various circuits of the system. The 787 series balancing valves are excellent Italian quality and are equivalent to the STAT type balancing valves. The valve features a thread locking mechanism so that valve settings can be accurately locked enabling the valve to be closed and re-opened to its exact pre-set position, as well as a setting indicator scale which can be read from any angle. Cim 747 series balancing valve is a fixed orifice style balancing valve and is suitable for flow control in heating or cooling systems. The fixed orifice double regulating valve utilises a separate fixed orifice for flow measurement and was designed specifically to overcome the accuracy problems associated with flow measurements across variable orifice valves. The 747 series balancing valves is the only watermarked balancing valve in Australia and feature excellent flow rates, +/-5% flow accuracy across the setting range, easy to read scale, and locking mechanism to enable the valve to be closed and opened to its exact pre-set location. Cim 3739B is a flanged balancing valve with variable orifice, used where an accurate flow measurement in large heating or cooling systems is needed. It is manufactured in dimensions from DN50 up to DN300. CIM 3739B flanged balancing valve is made of cast iron, with DIN16 flanges and it is suitable at working pressure up to 16 bar, within the temperature range of - 10 C and +120 C. This valve has the same dimensions, flange drilling and performance specifications as other brands in the market. Automatic Balancing Valves The 790 series is an automatic balancing valve which achieves constant flow by means of a cartridge. The wide selection of cartridges allows to match every flow requirement from a minimum of 0,007 l/s up to a maximum of 3,154 l/s. Cim 790 can be used either in constant flow or variable flow systems, assuring that specified flow would not be exceeded, even under fluctuating supply conditions. The automatic function eliminates manual balancing and commissioning, thereby significantly reducing the labour cost of balancing and the issues of improperly commissioned systems which in turn saves on energy from excessive flows.

7 All Valve Industries Product Guide And much much more... HIGH PRESSURE VALVES Carbon steel and stainless steel 3-piece high pressure ball valves for use in mining, petroleum and other industrial applications. Optional firesafe to API607 and spring return handles for OH&S applications AUTOMATIC AIR VENT Automatic air vents eliminate air in HVAC systems without the need for manual intervention. This prevents undesired noise, wear of devices circuits and inefficient performance of heating units. DEADMAN BALL VALVE The spring return handle provides a positive shut-off unless manually held open. This is useful where there is a risk of the valve being left open by the operator, or where the valve must automatically close for safety. LOCKABLE BALL VALVE This B12 series locking cap offers total security from tampering. It is unique in that it allows a ball valve to be locked in any position to allow a certain flow. This is especially useful for water authorities and councils. AGA APPROVED VALVE These European quality gas approved flanged ball valves are available from 25mm - 200mm. There are optional underground adaptors and actuator adaptors for these valves. FLOW RESTRICTORS Flow restrictors are available in various flow rates, configurations and sizes. These are particularly useful in irrigation, rainwater tanks, pumps and other similar applications. PVC TRUE UNION VALVES The Effast brand from Italy includes quality PVC products such as double union ball valves, check valves (with optional PTFE coated springs), butterfly valves, diaphragm valves and much more. THERMAL BALANCING Thermal balancing is used for automatic balancing of hot water recirculation systems. The return temperature is set on the valve and the flow is automatically restricted to achieve balancing in the system. For more information visit

8 The San Maurizio d Opaglio plant at its inception in ALL VALVE INDUSTRIES PTY LTD 30 / 205 PORT HACKING RD MIRANDA NSW 2228 PH: FAX: