MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS

Size: px
Start display at page:

Download "MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS"

Transcription

1 MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision Manual Part# 67 Caution: Read all safety and operating instructions before using this equipment. This parts list MUST accompany the equipment at all times.

2 EXPLODED VIEW Manta III 4096 combo fixed p/n VALVE INCLUDED WITH MOTOR USE P/N 48 FOR SERVICE REPLACEMENT FITTING INCLUDED WITH MOTOR USE P/N 555 FOR SERVICE REPLACEMENT Drill Part# Motor Substitution Table Motor Description 5845 W/O motor, pump and control box Motor Part# N/A 5869 Milwaukee Milwaukee Milwaukee Milwaukee

3 PARTS LIST Manta III 4096 combo fixed p/n SCREW, SOC HD CAP, /4-0 X SCREW, /4-0 X /4 SOCKET HEAD CAP 5587 GASKET, NEOPRENE SPONGE FITTING, /4 MNPT X /8 BARB KEY, SQR, /8 X MTR, 0 AMP 4096-MIL W/CLUTCH PLATE, AIR SEAL GASKET, AIR SEAL TAG, SERIAL NUMBER, BLANK RW 0 ASSY, DRILL STAND, FIXED, COMBO ASSY, CONTROL BOX DUAL SWITCH 0V 5848 ASSY, VACUUM PUMP 0V

4 EXPLODED VIEW Manta III 4096 combo TILT p/n VALVE INCLUDED WITH MOTOR USE P/N 48 FOR SERVICE REPLACEMENT FITTING INCLUDED WITH MOTOR USE P/N 555 FOR SERVICE REPLACEMENT Drill Part# Motor Substitution Table Motor Description 5846 W/O motor, pump and control box Motor Part# N/A Milwaukee Milwaukee Milwaukee Milwaukee

5 PARTS LIST Manta III 4096 combo TILT p/n SCREW, SOC HD CAP, /4-0 X SCREW, /4-0 X /4 SOCKET HEAD CAP 5587 GASKET, NEOPRENE SPONGE FITTING, /4 MNPT X /8 BARB KEY, SQR, /8 X MTR, 0 AMP 4096-MIL W/CLUTCH PLATE, AIR SEAL GASKET, AIR SEAL TAG, SERIAL NUMBER, BLANK RW 0 ASSY, DRILL STAND, TILT, COMBO ASSY, CONTROL BOX DUAL SWITCH 0V 5848 ASSY, VACUUM PUMP 0V 5850

6 EXPLODED VIEW Manta III 4096 ANCHOR fixed p/n VALVE INCLUDED WITH MOTOR USE P/N 48 FOR SERVICE REPLACEMENT FITTING INCLUDED WITH MOTOR USE P/N 555 FOR SERVICE REPLACEMENT 5 6 Drill Part# Motor Substitution Table Motor Description 5844 W/O motor, pump and control box Motor Part# N/A 674 Milwaukee Milwaukee Milwaukee

7 PARTS LIST Manta III 4096 ANCHOR fixed p/n 676 SCREW, SOC HD CAP, /4-0 X SCREW, /4-0 X /4 SOCKET HEAD CAP 5587 KEY, SQR, /8 X MTR, 0 AMP 4096-MIL W/CLUTCH TAG, SERIAL NUMBER, BLANK RW 6 ASSY, DRILL STAND, FIXED, ANCHOR ASSY, CONTROL BOX SINGLE SWITCH 0V 5840

8 EXPLODED VIEW & PARTS LIST Manta III 4096 ANCHOR TILT p/n VALVE INCLUDED WITH MOTOR USE P/N 48 FOR SERVICE REPLACEMENT FITTING INCLUDED WITH MOTOR USE P/N 555 FOR SERVICE REPLACEMENT 5 6 Drill Part# Motor Substitution Table Motor Description 5847 W/O motor, pump and control box Motor Part# N/A Milwaukee Milwaukee Milwaukee

9 EXPLODED VIEW & PARTS LIST Manta III 4096 ANCHOR TILT p/n 5865 SCREW, SOC HD CAP, /4-0 X SCREW, /4-0 X /4 SOCKET HEAD CAP 5587 KEY, SQR, /8 X MTR, 0 AMP 4096-MIL W/CLUTCH TAG, SERIAL NUMBER, BLANK RW 6 ASSY, DRILL STAND, TILT, ANCHOR ASSY, CONTROL BOX SINGLE SWITCH 0V

10 EXPLODED VIEW Manta III CORE DRILL ASSY, DRILL STAND, FIXED, COMBO p/n

11 PARTS LIST Manta III CORE DRILL ASSY, DRILL STAND, FIXED, COMBO p/n WASHER, / SAE FLAT 5094 NUT, /- HEX 58 4 WASHER, / SPLIT LOCK LABEL, WARNING, READ MANUAL SCREW, /- X -/ HEX HEAD CAP SCREW, FLAT HD, /4-0 X / LABEL, INFORMATION ON SERVICE LABEL, NOTICE, MOTOR PROBLEMS LEVEL, CIRCULAR BUBBLE, /4 DIA WHEEL, ROLLER 5744 CAP, PUSH / STAINLESS STEEL 5745 KNOB, KNURLED HD, /4-0 X -/ 5746 PAD, TOGGLE, /4-0 (9/6 X 5/8) SCREW, JACK COLLAR, MANTA, / X X 7/ KEY, /8 SQR X SCREW, SOC HD, CAP, /8-6 X -/ SCREW, HEX HD, TAP, /- X -/ BRACKET, WHEEL & VAC 58 0 BASE, M VAC TILT (COMP) 589 ASSY, COLUMN W/MK GEAR RACK ASSY, CARRIAGE ASSY, CORE DRILL HUB ASSY, CORE DRILL SPOKE LABEL, WARNING, SILICA, PROP LABEL, QR CODE MOUNT, MOTOR, MIL 78 7

12 EXPLODED VIEW Manta III CORE DRILL ASSY, DRILL STAND, TILT, COMBO p/n

13 PARTS LIST Manta III CORE DRILL ASSY, DRILL STAND, TILT, COMBO p/n WASHER, / SAE FLAT NUT, /- HEX 58 5 KNOB, DAVIES, 5/6-8 X WASHER, / SPLIT LOCK LABEL, WARNING, READ MANUAL SCREW, /- X -/ HEX HEAD CAP SCREW, FLAT HD, /4-0 X / LABEL, INFORMATION ON SERVICE LABEL, NOTICE, MOTOR PROBLEMS LEVEL, CIRCULAR BUBBLE, /4 DIA 5749 WHEEL, ROLLER 5744 CAP, PUSH / STAINLESS STEEL 5745 KNOB, KNURLED HD, /4-0 X -/ PAD, TOGGLE, /4-0 (9/6 X 5/8) SCREW, JACK COLLAR, MANTA, / X X 7/ KEY, /8 SQR X SCREW, SOC HD, CAP, /8-6 X -/ SCREW, HEX HD, TAP, /- X -/ BRACKET, WHEEL & VAC 58 TUBE, TELESCOPING BRACE, MNT 5840 ROD, TELESCOPING SUPPORT 584 BRACKET, TELESCOPING ROD SUPRT BASE, M VAC TILT (COMP) SCREW, HEX HD, CAP, /- X 4-/ ASSY, COLUMN W/MK GEAR RACK ASSY, CARRIAGE ASSY, CORE DRILL HUB ASSY, CORE DRILL SPOKE PIN, COTTER, /6 X 5/ PIN, CLEVIS, /4 X -/ PIN, CLEVIS, /4 X -5/ WASHER, FLAT, M NUT, HEX M LABEL, WARNING, SILICA, PROP LABEL, QR CODE MOUNT, MOTOR, MIL 78 9

14 EXPLODED VIEW Manta III CORE DRILL ASSY, DRILL STAND, FIXED, ANCHOR p/n

15 PARTS LIST Manta III CORE DRILL ASSY, DRILL STAND, FIXED, ANCHOR p/n WASHER, / SAE FLAT 5094 NUT, /- HEX 58 4 SCREW, HEX HD, 5/6-8 X WASHER, SPLIT LOCK, 5/ WASHER, FLAT, SAE, 5/ WASHER, / SPLIT LOCK LABEL, WARNING, READ MANUAL SCREW, /- X -/ HEX HEAD CAP LABEL, INFORMATION ON SERVICE LABEL, NOTICE, MOTOR PROBLEMS 5567 LEVEL, CIRCULAR BUBBLE, /4 DIA 5749 BRACKET, WHEEL MANTA 574 WHEEL, ROLLER CAP, PUSH / STAINLESS STEEL SCREW, JACK COLLAR, MANTA, / X X 7/ KEY, /8 SQR X SCREW, SOC HD, CAP, /8-6 X -/ SCREW, HEX HD, TAP, /- X -/ BASE, M ANCHOR (COMP) 5840 ASSY, COLUMN W/MK GEAR RACK ASSY, CARRIAGE ASSY, CORE DRILL HUB ASSY, CORE DRILL SPOKE LABEL, WARNING, SILICA, PROP LABEL, QR CODE MOUNT, MOTOR, MIL 78

16 EXPLODED VIEW Manta III CORE DRILL ASSY, DRILL STAND, TILT, anchor p/n

17 PARTS LIST Manta III CORE DRILL ASSY, DRILL STAND, TILT, anchor p/n WASHER, / SAE FLAT NUT, /- HEX 58 6 KNOB, DAVIES, 5/6-8 X SCREW, HEX HD, 5/6-8 X WASHER, LOCK, SPLIT, 5/ WASHER, FLAT, SAE, 5/ WASHER, / SPLIT LOCK LABEL, WARNING, READ MANUAL SCREW, /- X -/ HEX HEAD CAP LABEL, INFORMATION ON SERVICE 5508 LABEL, NOTICE, MOTOR PROBLEMS 5567 BASE, M ANCHOR TILT (COMP) 574 LEVEL, CIRCULAR BUBBLE, /4 DIA BRACKET, WHEEL MANTA WHEEL, ROLLER CAP, PUSH / STAINLESS STEEL SCREW, JACK COLLAR, MANTA, / X X 7/ KEY, /8 SQR X SCREW, SOC HD, CAP, /8-6 X -/ SCREW, HEX HD, TAP, /- X -/ TUBE, TELESCOPING BRACE, MNT 5840 ROD, TELESCOPING SUPPORT BRACKET, TELESCOPING ROD SUPRT SCREW, HEX HD, CAP, /- X 4-/ ASSY, COLUMN W/MK GEAR RACK ASSY, CARRIAGE ASSY, CORE DRILL HUB ASSY, CORE DRILL SPOKE PIN, COTTER, /6 X 5/ PIN, CLEVIS, /4 X -/ PIN, CLEVIS, /4 X -5/ WASHER, FLAT, M NUT, HEX M LABEL, WARNING, SILICA, PROP LABEL, QR CODE MOUNT, MOTOR, MIL 78

18 EXPLODED VIEW & PARTS LIST ASSY. COLUMN W/MK GEAR RACK p/n WASHER, #0 SPLIT LOCK COLUMN, MANTA SCREW, 0- X / SOCKET HEAD SET GEAR RACK / X /4 X

19 EXPLODED VIEW & PARTS LIST ASSY. CARRIAGE p/n BEARING, BALL, 7 X 40 X MM 77 SCREW, SOC HD CAP, /4-0 X KNOB, DAVIES, 5/6-8 X SCREW, SET, CPU PT. /4-0 X 5/ SCREW, FLAT HD, #6- X / BODY, CARRIAGE, COMP PLATE, ADJUSTMENT SLIDE, CARRIAGE BACK, CARRIAGE (COMP) HANDLE, CARRIAGE (COMP) NUT, HEX NYLOK SCREW, FLAT HD, #6- X / SCREW, PAN HD, /4-0 X / SHAFT, GEAR, SHORT SCREW, SOC HD CAP, /4-0 X -/

20 EXPLODED VIEW & PARTS LIST ASSY. CORE DRILL HUB p/n PLUG, HOLE PLASTIC /4 566 HUB, SLIP HANDLE 57 SCREW, SET, /4-0X/ KNOB, RUBBER, /4-0 X /4 LONG

21 EXPLODED VIEW & PARTS LIST ASSY. CORE DRILL SPOKE p/n KNOB, / - 0 FEM BALL SPOKE, SLIP HANDLE 57 7

22 EXPLODED VIEW & PARTS LIST ASSY. VACUUM PUMP 0V p/n NIPPLER, /4 NPT X CLOSE GALV 5598 PUMP, VACUUM MANTA CORE DRILL FILTER, WATER GAUGE, VACUUM valve, petcock /4 mip fitting, t /4 x /4 x /4 npt elbow, /4mnpt street brakcet, pump hold down screw, truss 0- x / screw, flat hd 0- x 5/ assy, vacuum hose

23 EXPLODED VIEW & PARTS LIST ASSY. control BOX, DUAL SWITCH 0V p/n SCREW, PAN HD, #0-4 X / CONNECTOR, CORD / 507 SCREW, #6- X / PAN HEAD SELF TAPPING SCREW, PHILP SELF TAP 0-4 X 5/ COVER, SWITCH RECEPTACLE, FLANGED 5A 5V AMMETER, MANTA CORE DRILL 0V TRANSFORMER, 0V AC SWITCH, TOGGLE 0 AMP CORD, ELEC, / SOOW, YELLOW, PLUG, 0V, L5-0P HARNES, WIRE, DUAL SWITCH 5475 RECEPTACLE, FLANGED TWIST-LOCK AMP BOX, SINGLE (COMP) COVER, CONTROL BOX (COMP)

24 EXPLODED VIEW & PARTS LIST ASSY. control BOX, SINGLE SWITCH 0V p/n SCREW, PAN HD, #0-4 X / CONNECTOR, CORD / 507 SCREW, #6- X / PAN HEAD SELF TAPPING SCREW, PHILP SELF TAP 0-4 X 5/ COVER, SWITCH AMMETER, MANTA CORE DRILL 0V TRANSFORMER, 0V AC SWITCH, TOGGLE 0 AMP CORD, ELEC, / SOOW, YELLOW, PLUG, 0V, L5-0P HARNES, WIRE, SINGLE SWITCH RECEPTACLE, FLANGED TWIST-LOCK 5775 CON. BOX, SINGLE (COMP) COVER, CON. BOX SINGLE COMP

25 ACCESSORIES accessories ITEM NUMBER DESCRIPTION Core Bits MK-Black- Supreme Grade for Concrete & Asphalt Excellent performance in applications associated with moderate to high steel reinforcement. Available Diameters / - 6 Core Bits MK-Orange- Premium Grade for Concrete & Asphalt MK-Orange is a premium bit designed for wet drilling applications that include light to moderate steel reinforcement. Available Diameters - 6 Core Bits MK-Yellow- Standard Grade for Concrete & Asphalt MK-Yellow is an excellent choice for all types of general wet drilling. Available Diameters Core Bits MK-Blue Turbo - Professional Grade for Concrete with Steel MK-Blue is an excellent choice for all types of general wet drilling. Available Diameters - 6 Core Bits MK-Black Turbo - Supreme Grade for Concrete & Asphalt MK-Black is an excellent choice for all types of general wet drilling. Available Diameters - 6 Core Bit Extensions Multiple tube extensions may be used extending the drilling depth in increments of. Available Diameters - /4 to 6 /4 For Use with MK-Turbo Bits Only Shaft Extensions easily attach to the core bit and allow for a deeper drilling capacity. Length 5/8 - Male / 5/8 Female - /4-7 Male / - /4-7 Female Motor Spacer kit for Manta IIII core drill rigs with Milwaukee motors. Allows rigs to use 6 bits. 4

26 ORDERING, RETURN, & PACKAGING ORDERING INFORMATION You may order MK Diamond products through your local MK Diamond distributor or, you may order direct from MK Diamond. When ordering direct from MK Diamond, please have the following information ready before calling: The Model Number of the saw The Serial Number of the saw Where the saw was purchased and when The Part Number for the part(s) being ordered The Part Description for the part(s) being ordered NOTE: Standard orders are $50.00 or more when ordering direct from MK Diamond. A $6.00 charge will be added to orders having a net billing value under $ A nominal handling fee of $5.00 may apply to some orders. All parts may be ordered by calling toll free to or and asking for Customer Service. For technical questions, call RETURN MATERIALS POLICY To expedite the service relative to the return of a product purchased through MK Diamond, please observe the following: NOTE: When returning all items, they must have been purchased within the previous twelve () months. Have the Model Number of the saw Have the Serial Number of the saw Have the location of where the saw was purchased Have the date when the saw was purchased Contact Customer Service for approval to return the item(s) Obtain a Returned Goods Number (RGA) authorizing the return Follow the packaging instructions in the following section Ensure the RGA number is on the outside of the returned package Ensure your item(s) are prepaid to the destination For returned items, call toll free to or and ask for Customer Service. PACKAGING INSTRUCTIONS Remove the motor and Support Assembly Dry the drill before shipping When packing, include the following: Core Drill, Vacuum Pump and Accessory Pack Package the unit in its original container or one of comparable size (do not ship the unit partially exposed) Ensure all parts are secured in the packaging to prevent moving AUTHORIZED SERVICE CENTERS For quicker repair time, you may contact MK Diamond Customer Service, toll free, at or for the Authorized Service Center closest too you or visit our web site at For technical questions, call

27 CONTACT & LIMITED WARRANTY CONTACT Please contact MK Diamond Products, Inc. Customer Service Department with any questions you might have regarding distributors, parts or service. Telephone: (800) Fax: (0) Customer Service Hours: Monday through Friday, 6AM-4PM PST MK Diamond Products, Inc. 5 Storm Parkway Torrance, CA 9050 MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in material and workmanship for () one year from date of purchase. The obligation of MK DIAMOND PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which, under normal use, prove to be defective in material or workmanship. The parts involved or the unit in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us, transportation prepaid. This warranty does not obligate us to bear the cost of labor or transportation charges in connection with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has been repaired or altered outside our factory. This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and warranties. We shall in no event be liable for consequential damages or contingent liabilities arising out of failure of any equipment or parts to operate properly. COPYRIGHT 07, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED. The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission. MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual property right covering this product in this document. This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold. The information and specifications included in this publication were in effect at the time of approval for printing. 4

28 MK-MANTA CORE DRILL III OWNER'S MANUAL & OPERATING INSTRUCTIONS MK Diamond Products, Inc. 5 Storm Parkway Torrance, CA 9050 Toll-Free: (800) Phone: (0) 59-5 Fax: (0)

MK-1080 PAVER SAW OWNER S MANUAL & PARTS MANUAL

MK-1080 PAVER SAW OWNER S MANUAL & PARTS MANUAL www.mkdiamond.com OWNER S MANUAL & PARTS MANUAL Revision 106 03.2019 Manual Part No. 166894 Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the

More information

MK-660 tile saw OWNER'S MANUAL PARTS LIST & OPERATING INSTRUCTIONS

MK-660 tile saw OWNER'S MANUAL PARTS LIST & OPERATING INSTRUCTIONS www.mkdiamond.com MK-660 tile saw OWNER'S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 06 03.207 Manual Part# 5346 Caution: Read all safety and operating instructions before using this equipment.

More information

MK-SINGLE DISC GRINDER OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS

MK-SINGLE DISC GRINDER OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS www.mkdiamond.com MK-SINGLE DISC GRINDER OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS SDG-3 Revision 202 11.2011 SDG-11 Manual 158273 Caution: Read all safety and operating instructions before using

More information

MK-1605 Electric Concrete Saw EXPLODED VIEW & PARTS LIST

MK-1605 Electric Concrete Saw EXPLODED VIEW & PARTS LIST www.mkdiamond.com MK-0 Electric Concrete Saw EXPLODED VIEW & PARTS LIST MK-0B Premium Part# 8099 Revision 0 0.08 Manual Part# 79 Caution: Read all safety and operating instructions before using this equipment.

More information

MK-2000 GAS SERIES MASONRY SAW

MK-2000 GAS SERIES MASONRY SAW www.mkdiamond.com MK-000 GAS SERIES MASONRY SAW Parts List MODELS part # MK-00H MK-00V MK-00K MK-00G Revision 0 0.0 Manual Part No. 0-PM Caution: Read all safety and operating instructions before using

More information

MK-100 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:

MK-100 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER: MK-00 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space

More information

E-CDR48-PL-0413 REVISED STARTING SERIAL # PARTS LIST MANUAL 48 CORE DRILL RIGS. EdcoParts.com

E-CDR48-PL-0413 REVISED STARTING SERIAL # PARTS LIST MANUAL 48 CORE DRILL RIGS. EdcoParts.com E-CDR48-PL-0413 PARTS LIST MANUAL 48 CORE DRILL RIGS REVISED STARTING SERIAL # 130410266 EdcoParts.com SKU # MODEL # VACUUM PUMP DRILL MOTOR SPEED/RPM 97100EV 4820 INCLUDED MILWAUKEE DYMO DRILL 2 SPEED

More information

GP-6 Cabmaker Owner s Manual and Operating Instructions

GP-6 Cabmaker Owner s Manual and Operating Instructions GP- Cabmaker Owner s Manual and Operating Instructions Belts Model: Part# 80008 Diamond Pads Model: Part# 80005 Carbide Wheel Model: Part# 8000 Revision 05 0.08 Manual Part No. 597 Caution: Read all safety

More information

Operator s Manual. Stripping Solution Applicator

Operator s Manual. Stripping Solution Applicator Operator s Manual Stripping Solution Applicator Record this Important Information Date of Purchase Purchased From Address City State Zip Phone Contact Serial Number Emergency Contacts Medical Emergency

More information

TX-3 TILE SAW OPERATION & PARTS MANUAL

TX-3 TILE SAW OPERATION & PARTS MANUAL www.mkdiamond.com TX-3 TILE SAW OPERATION & PARTS MANUAL Revision 104 05.2011 Manual Part No. 165808 Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany

More information

CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts.

CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts. CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll Free: 1- (800) 8-617 Fax: 1- (71) 89-11 Service Replacement Parts Undercounter High Temperature Dishwasher Model: UC6e M Machine Serial No.

More information

ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL

ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL EFFECTIVE MAY, 0 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that items specified are

More information

An ibuy Stores Company

An ibuy Stores Company REVISED STARTING SERIAL NO. 060604 PARTS MANUAL Model SK-4 4 DOWNCUT CONCRETE/ASPHALT WALK BEHIND SAWS SKU NO. MODEL POWER OPTION 45400D SK4-9H HONDA ENGINE 9 HP GX0 45600D SK4-H HONDA ENGINE HP GX40 4800D

More information

99105A Series - F Brush Lift Assembly Model :99105A 20" EZ BD Floorkeeper (w/ 2-12 V Batteries) - Series F

99105A Series - F Brush Lift Assembly Model :99105A 20 EZ BD Floorkeeper (w/ 2-12 V Batteries) - Series F 9905A Series - F Brush Lift Assembly Model :9905A 0" EZ BD Floorkeeper (w/ - V Batteries) - Series F Page- 5 7 8 9 5 7 8 0 5 7 8 9 0 5 7 8 9 0 0589 NUT, LOCK W/ LOCTITE 070 RING, RETAINING 0 WASHER, PLAIN

More information

CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY

CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Trailer Assembly 01 190331 Frame Assembly w/plugs 02 180741 Bracket, Axle, Trailer 03 180751 Axle, Trailer 04 180641 Washer,.8" ID, 1.5"

More information

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com

More information

OWNER'S MANUAL IMPORTANT: READ OWNER'S MANUAL CAREFULLY MODEL : CHEETAH DC2000 FOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL:

OWNER'S MANUAL IMPORTANT: READ OWNER'S MANUAL CAREFULLY MODEL : CHEETAH DC2000 FOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL: OWNER'S MANUAL IMPORTANT: READ OWNER'S MANUAL CAREFULLY MODEL : CHEETAH DC2000 FOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL: SERIAL NUMBER:-------- DATE PURCHASED: PURCHASED FROM:

More information

DIGITAL CLAM THE MAXX PRESS OPERATOR S MANUAL. Available models: MAXX Clam 11" x 15", 16" x 16", 16" x 20" (shown)

DIGITAL CLAM THE MAXX PRESS OPERATOR S MANUAL. Available models: MAXX Clam 11 x 15, 16 x 16, 16 x 20 (shown) DIGITAL CLAM OPERATOR S MANUAL Available models: MAXX Clam 11" x 15", 16" x 16", 16" x 20" (shown) HOTRONIX Safety Instructions When using your heat press, basic precautions should always be followed,

More information

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com

More information

Spare Parts List (Kits) Model Ref.:- HM35 SERIES A Spare Parts List (Kits) Issue 8 Dated 10-February-2015 Reference Drawing 09-1108-0000 Issue B Dated 07-January 2014 Drawing Ref. Part Number DESCRIPTION

More information

User s Manual and Operating Instructions

User s Manual and Operating Instructions User s Manual and Operating Instructions Model Numbers: PT-18W-DDF-A, PT-20F-DDF-A, PT-20S-DDF, PT-24O-DDF, PT-24-DDF, PT-24-DDF-F, PT-30-DDF, PT-30P-DDF-A, PT-30P-DDF-AF READ AND SAVE THESE INSTRUCTIONS

More information

Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base

Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base 22 Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base Parts List - Model J-7020M/J-7040M Miter Cut-off Saw Base 1 J-5507591 Base, Machine 1 1-1 5512197 Plug, Drain (3/8in, PT) 2 5507592 Screw,

More information

BUNN CWT-CS CWTF-CS BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217)

BUNN CWT-CS CWTF-CS BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) BUNN CWT-CS CWTF-CS ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION

More information

2454 RETRO POP Popcorn Machine Instruction Manual Model #2454

2454 RETRO POP Popcorn Machine Instruction Manual Model #2454 2454 RETRO POP Popcorn Machine Instruction Manual Model #2454 Part No. 59415 Revised: June 2005 Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS Popcorn Machines INSTALLATION INSTRUCTIONS INSTALLATION

More information

Parts Manual Vermeer/McLaughlin V500LTHD Vacuum Machine Part #E (SERIAL # 5DHDLT _5DHDLT )

Parts Manual Vermeer/McLaughlin V500LTHD Vacuum Machine Part #E (SERIAL # 5DHDLT _5DHDLT ) 006 Perimeter Road. Greenville, SC 9605 Toll Free: 800/5-90 - Phone: 86/77-5870 Fax: 86/5-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual Vermeer/McLaughlin

More information

BUNN H5E H5M H5X BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217)

BUNN H5E H5M H5X BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) ! BUNN DISCONNECT FROM POWER SOURCE BEFORE REMOVAL OF ANY PANEL OR REPLACEMENT OF ANY COMPONENT! WARNING H5E H5M H5X WARNING Very Hot Water Use With Care!! ILLUSTRATED PARTS CATALOG Designs, materials,

More information

DISCARD DECANTER IF: FAILURE TO COMPLY RISKS INJURY FUNNEL CONTENTS ARE HOT ILLUSTRATED PARTS CATALOG

DISCARD DECANTER IF: FAILURE TO COMPLY RISKS INJURY FUNNEL CONTENTS ARE HOT ILLUSTRATED PARTS CATALOG ! GMB-PS WARNING Disconnect from power source before removal of any panel or replacement of any component! FUNNEL CONTENTS ARE HOT CAUTION DISCARD DECANTER IF:. CRACKED. SCRATCHED. BOILED DRY. HEATED WHEN

More information

DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG

DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG BUNN CWT-CS CWTF-CS DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or

More information

6 oz. Kettle Poppers With / Love My Popper Kettle Popcorn Machine Instruction Manual Models: 1871,2660,2661

6 oz. Kettle Poppers With / Love My Popper Kettle Popcorn Machine Instruction Manual Models: 1871,2660,2661 Part No. 49217 Revised: June 2004 With / Love My Popper Kettle Popcorn Machine Instruction Manual Models: 1871,2660,2661 Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS 2 Models: 1871,2660,2661 INSTALLATION

More information

Dirt Dragon. Operator and Parts Manual WOOD FLOOR CLEANING MACHINE

Dirt Dragon. Operator and Parts Manual WOOD FLOOR CLEANING MACHINE Dirt Dragon WOOD FLOOR CLEANING MACHINE Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 800-441-1934 Fax: 800-942-2007 Technical Service: 877-856-5954 www.basicoatings.com

More information

Revised 9/05. Model X-750 Subassembly Parts List

Revised 9/05. Model X-750 Subassembly Parts List Revised /0 Model Subassembly Parts List Blade Belt Tensioner 0 PART NUMBER DESCRIPTION QTY. -G0-0-0 SHSB, / x / -G0-0-0 SHSB, / x / -X-0-00 Arm, Belt Tensioner -G0-0-00 Washer, Flat /" -0-0-0 Washer, Split

More information

TS-49 PART # DPEC DATE: REVISED:

TS-49 PART # DPEC DATE: REVISED: 36-6022 COMPACT PORTABLE TABLE SAW - w/mobile STAND 38 73 325 176 x2 x4 x2 324 326 323 x2 P1 36-6022 COMPACT PORTABLE TABLE SAW - w/mobile STAND 116 191 P2 36-6022 COMPACT PORTABLE TABLE SAW - w/mobile

More information

DISCARD DECANTER IF: FUNNEL CONTENTS ARE HOT FAILURE TO COMPLY RISKS INJURY

DISCARD DECANTER IF: FUNNEL CONTENTS ARE HOT FAILURE TO COMPLY RISKS INJURY ! BUNN GMB-PS WARNING Disconnect from power source before removal of any panel or replacement of any component! FUNNEL CONTENTS ARE HOT CAUTION DISCARD DECANTER IF:. CRACKED. SCRATCHED. BOILED DRY. HEATED

More information

AUTO OPEN SERIES CLAM/HOVER PRESS OPERATOR S MANUAL

AUTO OPEN SERIES CLAM/HOVER PRESS OPERATOR S MANUAL AUTO OPEN SERIES CLAM/HOVER PRESS OPERATOR S MANUAL HOTRONIX CLAM PRESS Safety Instructions When using your heat press, basic precautions should always be followed, including the following: 1. Read all

More information

CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO

CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN HSROG ML-111148 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43003 (June 2001) HOT SECTION 26 OVEN TOP SECTION

More information

Owner s Manual. Keep with machine for reference PKC24 INSTALLATION & OPERATION REV Perlick Corporation 8300 W Good Hope Rd Milwaukee, WI 53223

Owner s Manual. Keep with machine for reference PKC24 INSTALLATION & OPERATION REV Perlick Corporation 8300 W Good Hope Rd Milwaukee, WI 53223 Owner s Manual Keep with machine for reference PKC24 INSTALLATION & OPERATION REV.11.09 Perlick Corporation 8300 W Good Hope Rd Milwaukee, WI 53223 800-558- 5592 FAX 414-353- 7069 perlick.com TABLE OF

More information

MKDX BULLNOSE & SHAPING MACHINE OPERATION & PARTS MANUAL Revision 105. Manual Part#

MKDX BULLNOSE & SHAPING MACHINE OPERATION & PARTS MANUAL Revision 105. Manual Part# www.mkdiamond.com MKDX BULLNOSE & SHAPING MACHINE OPERATION & PARTS MANUAL Revision 105 03.2010 Manual Part# 166106 Caution: Read all safety and operating instructions before using this equipment. This

More information

VENTURI AIR SPRAYERS

VENTURI AIR SPRAYERS VENTURI AIR SPRAYERS Parts Manual For Model P45N1-400-G 3-Point Mount Form: P45N400GBookRev2012.indd June 2012 (Rev.) TABLE OF CONTENTS SECTION DESCRIPTION... PAGE 1 Introduction... 1 1.1 Purchaser s Responsibility...

More information

FCT-CE SERIES ELECTRIC TILTING KETTLE W/HAND CRANK PARTS AND SERVICE MANUAL

FCT-CE SERIES ELECTRIC TILTING KETTLE W/HAND CRANK PARTS AND SERVICE MANUAL FCT-CE SERIES ELECTRIC TILTING KETTLE W/HAND CRANK PARTS AND SERVICE MANUAL EFFECTIVE SEPTEMBER 12, 2014 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the

More information

PACER 30 VACUUM IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE

PACER 30 VACUUM IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE DANGER! PACER 30 VACUUM IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE Failure to Observe These Instructions Can Cause Fire, Electrical Burn, Shock

More information

WAV-26 UPRIGHT WIDE AREA VACUUM

WAV-26 UPRIGHT WIDE AREA VACUUM PARTS & OPERATING MANUAL WAV-26 UPRIGHT WIDE AREA VACUUM PLEASE READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this book carefully before

More information

FES - Series Portable Electric Heaters. YES - Series Suspended Electric Heaters CONTENTS

FES - Series Portable Electric Heaters. YES - Series Suspended Electric Heaters CONTENTS FOSTORIA INDUSTRIES, INC. A DIVISION OF FES - Series Portable Electric Heaters YES - Series Suspended Electric Heaters (FES-1524-3E shown) IMPORTANT SAFETY INFORMATION INSIDE Serious injury or death possible.

More information

Parts and Service Manual

Parts and Service Manual Section II Parts and Service Manual (70241A) CLARKE TECHNOLOGY Operator's Manual - MINI MAX Page -29- Frame and Front Cover Assembly Drawing 2/01 Page -30- CLARKE TECHNOLOGY Operator's Manual -MINI MAX

More information

DIGITAL CAP THE MAXX PRESS OPERATOR S MANUAL

DIGITAL CAP THE MAXX PRESS OPERATOR S MANUAL DIGITAL CAP OPERATOR S MANUAL HOTRONIX Safety Instructions When using your heat press, basic precautions should always be followed, including the following: 1. Read all instructions. 2. Use heat press

More information

MODEL CMA-180UC PARTS MANUAL Rev 1.18

MODEL CMA-180UC PARTS MANUAL Rev 1.18 MODEL CMA-180UC PARTS MANUAL Rev 1.18 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS

More information

Parts Manual. Spray Unit Easy Spray-H. Issue /07/17 Ref. NR ENG

Parts Manual. Spray Unit Easy Spray-H. Issue /07/17 Ref. NR ENG Parts Manual Spray Unit Easy Spray-H Issue 2.5 27/07/17 Ref. NR-00087-ENG Before installing the unit and starting it up, please take the time to read all the technical and safety instructions in the Service

More information

TSX70. SMT Reflow Vacuum Workstation. ï COMPLIES WITH MIL-S-45743E, MIL-STD-2000, DOD-STD B, WS6536E AND ESD SPEC, DOD-STD-1686, DOD-HDBK-263

TSX70. SMT Reflow Vacuum Workstation. ï COMPLIES WITH MIL-S-45743E, MIL-STD-2000, DOD-STD B, WS6536E AND ESD SPEC, DOD-STD-1686, DOD-HDBK-263 TSX70 SMT Reflow Vacuum Workstation ï COMPLIES WITH MIL-S-45743E, MIL-STD-2000, DOD-STD-2000-1B, WS6536E AND ESD SPEC, DOD-STD-1686, DOD-HDBK-263 MADE IN U.S.A. Hot Gas + Hot Tip Desoldering EDSYNÆ INC.

More information

CREWMAN 20 ORB CREWMAN 28 ORB

CREWMAN 20 ORB CREWMAN 28 ORB E88066-00 E88068-00 E88070-00 CREWMAN 20 ORB CREWMAN 28 ORB 20, 28 Orbital Strip Machines Operator and Parts Manual 400 Van Camp Road Bowling Green, Ohio 43402 Customer Service: 888-GO-BETCO Fax: 800-445-5056

More information

Model 2016, 2025, 2025BN, 2025ST Staging Cabinets Instruction Manual

Model 2016, 2025, 2025BN, 2025ST Staging Cabinets Instruction Manual Model, 2025BN, 2025ST Staging Cabinets Instruction Manual Part No 53021 Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS DANGER Machine must be properly grounded to prevent electrical shock to personnel.

More information

CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY

CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Trailer Assembly 01 180721 Frame Assembly 02 188671 Bushing, 1.02" ID x 1.25" OD x.75l 03 188781 Support, Axle, 1" 04 188381 Plate, Axle

More information

TX-4 TILE SAW OWNER S MANUAL, OPERATION MANUAL & PARTS LIST

TX-4 TILE SAW OWNER S MANUAL, OPERATION MANUAL & PARTS LIST www.mkdiamond.com TX-4 TILE SAW OWNER S MANUAL, OPERATI MANUAL & PARTS LIST Revision 102 03.2017 Manual Part No. 171353 Caution: Read all safety and operating instructions before using this equipment.

More information

Instruction Manual. Astro Staging Cabinet

Instruction Manual. Astro Staging Cabinet Instruction Manual Astro Staging Cabinet 10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA 2017 Gold Medal Products Co. Part No. 40269 SAFETY PRECAUTIONS DANGER Machine must be properly grounded to

More information

Operating Instructions for the BBO-1 and BBO-2 Basket Blasters

Operating Instructions for the BBO-1 and BBO-2 Basket Blasters Operating Instructions for the BBO-1 and BBO-2 Basket Blasters 2101 West Cabot Boulevard Langhorne, PA 19047-1893 www.empire-airblast.com Page 2 Model Number: Serial Number: Date of Purchase: Date of Installation:

More information

DISCARD DECANTER CAUTION . CRACKED . BOILED DRY. HEATED WHEN EMPTY. USED ON HIGH FLAME FAILURE TO COMPLY RISKS INJURY FUNNEL CONTENTS ARE HOT PN: 658

DISCARD DECANTER CAUTION . CRACKED . BOILED DRY. HEATED WHEN EMPTY. USED ON HIGH FLAME FAILURE TO COMPLY RISKS INJURY FUNNEL CONTENTS ARE HOT PN: 658 PN: 658 IF: PN: 658! IF: PN: 658! IF: BUNN C, CT & CTF! CAUTION WARMERS AND SURFACES ARE HOT C SERIES READY CAUTION DISCARD DECANTER. CRACKED. SCRATCHED. BOILED DRY. HEATED WHEN EMPTY. USED ON HIGH FLAME.

More information

NHR-25 Feed Hopper with Agitator

NHR-25 Feed Hopper with Agitator Instruction Sheet P/N 0920-02 Description This instruction sheet provides specifications, installation instructions, and parts lists for the NHR-25 Powder Feed Hopper with Agitator. This hopper is used

More information

SINGLE BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217)

SINGLE BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) ! SINGLE WARNING DISCONNECT FROM POWER SOURCE BEFORE REMOVAL OF ANY PANEL OR REPLACEMENT OF ANY COMPONENT! PRIOR TO S/N SNG000000 gal gal gal START ON / WARMER SELECTOR READY! BUNN MANUFACTURED BY BUNN-O-MATIC

More information

FMU-1500 High-Speed Burnisher

FMU-1500 High-Speed Burnisher New Equipment Warranty Limited Warranty The manufacturer gives you the following limited warranty for this product if it was originally purchased for use, not resale, from BISSELL BigGreen Commercial or

More information

BR-6 Rotary Rock Tumbler Owner s Manual

BR-6 Rotary Rock Tumbler Owner s Manual Rotary Rock Tumbler Owner s Manual Revision 104 10.2018 Manual Part# 168148 Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at

More information

EX20. Parts List Models: (100C) (cold), (100H) (heated), (100SC) (single cord, heated) Form No /2015 REV A

EX20. Parts List Models: (100C) (cold), (100H) (heated), (100SC) (single cord, heated) Form No /2015 REV A EX0 Parts List Models: 560588 (00C) (cold), 560589 (00H) (heated), 560590 (00SC) (single cord, heated) Form No. 56065 5/05 REV A GENERAL VIEW Item Ref. No. Qty Description Base System Recovery System Solution

More information

Harvey Chemiclave EC Series Sterilizers

Harvey Chemiclave EC Series Sterilizers BARNSTEAD THERMOLYNE CORPORATION CHEMICLAVE EC SERIES STERILIZERS Harvey Chemiclave EC Series Sterilizers PARTS CATALOG LT1121x 12/10/98 1 Final Assembly - Refer to Figure 1 Figure Page 1 Final Assembly

More information

BUNN A10 & A10-A BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217)

BUNN A10 & A10-A BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS PHONE: (217) FAX: (217) BUNN A0 & A0-A ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST

More information

THE EASTMAN On-Line Marking System Service Manual. Please read completely before attempting to operate your new On-Line Marking System.

THE EASTMAN On-Line Marking System Service Manual. Please read completely before attempting to operate your new On-Line Marking System. THE EASTMAN On-Line Marking System Service Manual 68-26186 Patent Pending Please read completely before attempting to operate your new On-Line Marking System. WARNING This machine is equipped with a very

More information

Getz Equipment Innovators 450 lb Dual Portable Dry Chemical Fill System

Getz Equipment Innovators 450 lb Dual Portable Dry Chemical Fill System Getz Equipment Innovators 450 lb Dual Portable Dry Chemical Fill System 1 Revised 11/18/10 2320 Lakecrest Drive, Pekin IL 61554 PH. (888) 747-4389 Fax (309) 495-0625 Website: www.getzequipment.com LIMITED

More information

MTC-Series Manual Trash Compactors Instruction Manual

MTC-Series Manual Trash Compactors Instruction Manual Vestil Manufacturing Co. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 Website: www.vestilmfg.com e-mail: info@vestil.com

More information

STAND ALONE DRYER BASE. Parts Manual

STAND ALONE DRYER BASE. Parts Manual STAND ALONE DRYER BASE Parts Manual TABLE OF CONTENTS DRYER BASE SYSTEM DRYER BASE SYSTEM ASSEMBLY (FIG. 1) 3 FRAME ASSEMBLY (FIG. 2). 5 CONVEYOR DRIVE ASSEMBLY (FIG. 3)...7 IDLER SHAFT / TENSIONER ASSEMBLY

More information

GLC/GW-100 MANUAL INSTALLATION SERVICE PARTS REV.1.01

GLC/GW-100 MANUAL INSTALLATION SERVICE PARTS REV.1.01 Owner s Manual Keep with machine for reference GLC/GW-100 MANUAL INSTALLATION SERVICE PARTS REV.1.01 CMA DISHMACHINES 12700 KNOTT STREET GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 FAX 714-895- 2141 www.cmadishmachines.com

More information

IMPORTANT SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION OPERATION INSTALLATION PARTS MANUAL www.fostoriaindustries.com Made in U.S.A. ELECTRIC PORTABLE HEATER FES-1024-1CA 08860010 YES-1024-1CA 08861510 FES-1520-3A 08860110 YES-1520-3A 08860810 FES-1524-1A

More information

User s Manual and Operating Instructions

User s Manual and Operating Instructions User s Manual and Operating Instructions Model Numbers: CL-30P-DDF, CL-20F-DDF, CL-24O-DDF, CL-30-DDF READ AND SAVE THESE INSTRUCTIONS IMPORTANT: Read and understand all of the directions in this manual

More information

MODEL CMA-180UC PARTS MANUAL Rev 1.16

MODEL CMA-180UC PARTS MANUAL Rev 1.16 MODEL CMA-180UC PARTS MANUAL Rev 1.16 CMA DISHMACHINES 12700 KNOTT STREET GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS

More information

MDT6N SERVICE PARTS TABLE OF CONTENTS. Cabinet PAGE 2. Hopper PAGE 3. Sink PAGE 4. Ice Chute and Dispensing PAGE 5. Air Cooled Refrigeration PAGE 6

MDT6N SERVICE PARTS TABLE OF CONTENTS. Cabinet PAGE 2. Hopper PAGE 3. Sink PAGE 4. Ice Chute and Dispensing PAGE 5. Air Cooled Refrigeration PAGE 6 This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine needing parts to be sure that this is the correct parts list. There have been several

More information

Popcorn Machine Instruction Manual Model #2551EX

Popcorn Machine Instruction Manual Model #2551EX Part No. 49793EX Revised January 2004 Popcorn Machine Instruction Manual Model #2551EX Cincinnati, OH 45214-2089 USA. SAFETY PRECAUTIONS INSTALLATION INSTRUCTIONS SETUP Remove all packing material and

More information

IMPORTANT SAFETY INFORMATION:

IMPORTANT SAFETY INFORMATION: Owner s Manual Model G70 IMPORTANT SAFETY INFORMATION: Always read this manual first before attempting to install or use this heater. For your safety, always comply with all warnings and safety instructions

More information

RX-Express III Owner s Manual

RX-Express III Owner s Manual RX-Express III Owner s Manual RX-Express III Table of Contents Page Machine Specifications... 1 Preparation and Precautions... 2 Operation... 4 Cleaning Instructions... 6 Automatic Scrubber Option and

More information

P-60 and 60 Special. Popcorn Machine Instruction Manual Model #1866, #2085, #2086 and #2656. Cincinnati, OH USA

P-60 and 60 Special. Popcorn Machine Instruction Manual Model #1866, #2085, #2086 and #2656. Cincinnati, OH USA Part No. 49064 Revised: March 2004 P-60 and 60 Special Popcorn Machine Instruction Manual Model #1866, #2085, #2086 and #2656 Models #1866 and #2086 Models #2085 and #2656 Cincinnati, OH 45241-4807 USA

More information

Nilfisk Inc Winnetka Avenue North Minneapolis, MN REV.03( ) VF80189

Nilfisk Inc Winnetka Avenue North Minneapolis, MN REV.03( ) VF80189 Nilfisk Inc. 9435 Winnetka Avenue North Minneapolis, MN 55445 www.usviper.com REV.03(05-) VF8089 SAFETY PRECAUTIONS This machine is intended for commercial use. It is constructed for use in an indoor

More information

Power Eagle 1016/1020. Self Contained Carpet Extractor. Operator and Parts Manual

Power Eagle 1016/1020. Self Contained Carpet Extractor. Operator and Parts Manual Power Eagle 0/00 Self Contained Carpet Extractor Model No.: 080 0 09 0 (Can.) 08 00 09 00 (Can.) 0980 00 (0V/0HZ) Operator and Parts Manual NOBLES 8 RANSOM STREET HOLLAND MI 9 U.S.A. CUSTOMER SERVICE:

More information

E C O L O G I C A L C O O L E R S INTELLIGENT PLUS PARTS CATALOGUE

E C O L O G I C A L C O O L E R S INTELLIGENT PLUS PARTS CATALOGUE E C O L O G I C A L C O O L E R S INTELLIGENT PLUS PARTS CATALOGUE www.viesa.ca / 1-888 438-8444 IMPORTANT Installation requires an experienced mechanic with specific knowledge in the installation of the

More information

UNIVERSAL 750 PRE-MIX DISPENSER

UNIVERSAL 750 PRE-MIX DISPENSER Anoka, MN. 0 - Telephone -00--00 Facsimile -00--0 MODEL NO. xxx xxx Universal 0 of Control Code A Manual Part No. 00 -- Revised: -- ªIMI Cornelius Co., - Anoka, MN. 0 - Telephone -00--00 Facsimile -00--0

More information

AURA WIDE AREA VACUUM Parts Manual

AURA WIDE AREA VACUUM Parts Manual AURA WIDE AREA VACUUM Parts Manual INTRODUCTION OPERATING & MAINTENANCE INSTRUCTIONS READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this

More information

Pro Pop 12/14 oz. Unimaxx Model 2214ST Instruction Manual (2214ST shown, see next page for other models covered)

Pro Pop 12/14 oz. Unimaxx Model 2214ST Instruction Manual (2214ST shown, see next page for other models covered) Part No. 67834 Revised: July 2008 Pro Pop 12/14 oz. Unimaxx Model 2214ST Instruction Manual (2214ST shown, see next page for other models covered) Operator Side Customer Side Cincinnati, OH 45241-4807

More information

The Extraordinaire OWNER S MANUAL. Orbital Ceiling Fan. Model No. OF110** READ AND SAVE THESE INSTRUCTIONS. Net Weight 14.5 lbs. or 6.59 kg.

The Extraordinaire OWNER S MANUAL. Orbital Ceiling Fan. Model No. OF110** READ AND SAVE THESE INSTRUCTIONS. Net Weight 14.5 lbs. or 6.59 kg. The Extraordinaire Orbital Fan WARNING: Support Directly From Building Structure Net Weight 14.5 lbs. or 6.59 kg. Model No. OF110** OWNER S MANUAL READ AND SAVE THESE INSTRUCTIONS Important Safety Instructions

More information

WARNING!! The attached Gold Medal Manual is for reference only and is not intended for any other purpose. The information contained in these on line manuals is subject to change at any time. Improvements

More information

FM-17DS & FM-20DS FLOOR MACHINES

FM-17DS & FM-20DS FLOOR MACHINES PARTS & OPERATING MANUAL FM-17DS & FM-20DS FLOOR MACHINES PLEASE READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this book carefully before

More information

Instruction Manual. Spiral Slicer

Instruction Manual. Spiral Slicer Instruction Manual Spiral Slicer Model No. 5280-00-100 10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA 2017 Gold Medal Products Co. Part No. 82876 Table of Contents... 1 SAFETY PRECAUTIONS... 3

More information

Repair Parts List DRYER MODEL NUMBER MDG30MNAWW. When requesting service or ordering parts, always provide the following information:

Repair Parts List DRYER MODEL NUMBER MDG30MNAWW. When requesting service or ordering parts, always provide the following information: Repair Parts List DRYER MODEL NUMBER MDG30MNAWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005

More information

TABLE OF CONTENTS

TABLE OF CONTENTS TABLE OF CONTENTS Safety Precautions Machine Operation Machine Maintenance & Storage Handle Release Assembly Instructions Parts Lists Wiring Diagram Warranty Policy 3 4 4 5 6-10 11 12-2- SAFETY PRECAUTIONS!!!

More information

Model 2016, 2025, 2025BN, 2025ST Staging Cabinets Instruction Manual

Model 2016, 2025, 2025BN, 2025ST Staging Cabinets Instruction Manual Model, 2025BN, 2025ST Staging Cabinets Instruction Manual Part No 53021 Revised: March 2010 Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS Staging Cabinet Installation Instructions Inspection of Shipment:

More information

WAV-30 WIDE AREA VACUUM

WAV-30 WIDE AREA VACUUM PARTS & OPERATING MANUAL WAV-30 WIDE AREA VACUUM PLEASE READ THIS BOOK This operator s book has important information for the use and safe operation of this machine. Read this book carefully before starting

More information

ILLUSTRATIONS ARE FOR REFERENCE ONLY AND ARE SUBJECT TO CHANGE WITHOUT NOTICE ITEM P/N DESCRIPTION

ILLUSTRATIONS ARE FOR REFERENCE ONLY AND ARE SUBJECT TO CHANGE WITHOUT NOTICE ITEM P/N DESCRIPTION TC-0 TURN PLATE TC-0 TURN PLATE 0 0 0 TC-0-000 TURNTABLE TC-0-00 TURNTABLE, TC-0 TC-0-00 SCREW, M X TC-0-00 COVER, TC-0 TC-0-00 RETAINING PIN TC-0-00 CLAMP TC-0-00 CLAMP SEAT TC-0-0 CLAMP SEAT, TC-0 TC-0-00

More information

LOKPRINT. Industrial Apparel Label Station. Operation / Maintenance And Parts List. Users Manual AVERY DENNISON. Manual Edition 5.0.

LOKPRINT. Industrial Apparel Label Station. Operation / Maintenance And Parts List. Users Manual AVERY DENNISON. Manual Edition 5.0. Users Manual LOKPRINT Industrial Apparel Label Station Operation / Maintenance And Parts List AVERY DENNISON Manual Edition 5.0 09 June 2010 Manual Part Number 221398 This page intentionally left blank

More information

HT4700 Heating Jacket Instruction Manual

HT4700 Heating Jacket Instruction Manual HT4700 Heating Jacket Instruction Manual Manual No. 102196632, Revision C Instrument No. 101631160 HT4700 Heating Jacket Instruction Manual 2013 Fann Instrument Company Houston, Texas, USA All rights reserved.

More information

model NO. LSS GALLON SKID MOUNTED HIGH PRESSURE SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS

model NO. LSS GALLON SKID MOUNTED HIGH PRESSURE SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS 000 model NO. LSS- 00 GALLON SKID MOUNTED HIGH PRESSURE SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS Part number and descriptions can be obtained from the illustrated parts list section of this manual.

More information

OPERATION, SERVICE & PARTS MANUAL

OPERATION, SERVICE & PARTS MANUAL OPERATION, SERVICE & PARTS MANUAL BROASTER 620N & 621 EASY BREADER Be sure ALL installers read, understand, and have access to this manual at all times. MODEL 620N MODEL 621 Genuine Broaster Chicken, Broasted,

More information

Page 1 of 18. Part# /5/2013

Page 1 of 18. Part# /5/2013 Part# 1002655-06 8/5/2013 This manual contains important information concerning the installation and operation of the gun washers listed above. Read manual thoroughly and keep for future reference INSTRUCTIONS

More information

SERIES: A REVISION ECN# DESCRIPTION OF CHANGE MOD. BY DATE 3 N/A DRAIN HOSE UPDATED 31/08/2016. Drawing Ref. No. Kit No. Part Description Qty

SERIES: A REVISION ECN# DESCRIPTION OF CHANGE MOD. BY DATE 3 N/A DRAIN HOSE UPDATED 31/08/2016. Drawing Ref. No. Kit No. Part Description Qty Tacony CFC Orbis Scrubber Drier Part Reference: CHASSIS ASSEMBLY MACHINE: OBS80 REF. DWG. #: 0950000 SHEET REVISION ECN# DESCRIPTION OF CHANGE MOD. BY DATE N/A DRAIN HOSE UPDATED /08/06 Drawing Ref. No.

More information

VA175 SOLDAVAC. Air and Vacuum Pick-Up System

VA175 SOLDAVAC. Air and Vacuum Pick-Up System Static Safe VA175 SOLDAVAC Air and Vacuum Pick-Up System A revolutionary pick and place system the uses direct AIR or VACUUM to pick-up and place parts and components. Using shop air, the VA175 uses AIR

More information

Operator and Parts Manual Nu-1600 Burnisher, Belt Drive Nu-2000 Burnisher, Belt Drive

Operator and Parts Manual Nu-1600 Burnisher, Belt Drive Nu-2000 Burnisher, Belt Drive Operator and Parts Manual Nu-1600 Burnisher, Belt Drive Nu-2000 Burnisher, Belt Drive NuSource Enterprises, LLC; A 4699 61 st St. Suite C; Holland, MI 49423 Length 33.75 in. Width 21 in. Height 50 in.

More information

ICE/BEVERAGE DISPENSER

ICE/BEVERAGE DISPENSER Illustrated Parts List ICE/BEVERAGE DISPENSER Model: Enduro-2XX intellicarb Publication Number: 6209956IPL Revision Date: August 3, 200 Release Date: March 26, 204 Revision: B Visit the Cornelius web site

More information

Floor Dot Corp Horizon Parkway Suite 200 Buford, GA Phone: (404) Fax: (404)

Floor Dot Corp Horizon Parkway Suite 200 Buford, GA Phone: (404) Fax: (404) 03-280 Floor Dot Corp. 650 Horizon Parkway Suite 200 Buford, GA 3058 Phone: (0) 592 230 Fax: (0) 592 233 TABLE OF CONTENTS Safety Precautions 3 Machine Operation Machine Maintenance & Storage Parts List

More information

PARTS LIST RALLY 220 SAVE THESE INSTRUCTIONS

PARTS LIST RALLY 220 SAVE THESE INSTRUCTIONS PARTS LIST RALLY 220 SAVE THESE INSTRUCTIONS OVERVIEW OVERVIEW ITEM PART NO. DESCRIPTION QTY 1 4099011 CORD WRAP, (SET FOR ONE CORD, FASTENERS NOT INCLUDED) 1 2 9120935 1/4 WASHER,.268 ID x.5 OD x.060

More information