T6572A, T6573A,B, T6992A,B, T6993B Digital Fan-Coil Thermostats XE88/XE100 SERIES
|
|
- Owen Stanley
- 6 years ago
- Views:
Transcription
1 T7A, T7A,B, TA,B, TB Digital Fan-Coil Thermostats XE/XE00 SERES FEATURES PRODUCT DATA Attractive modern styling with digital display makes the thermostat ideal for offices or hotels. Hotel card key input overrides the temperature setting to installer-defined heating and cooling temperatures. All models have proportional plus integral control that controls temperature to within 0.7 C in both heating and cooling. Thermostat mounts directly onto a wall, a in. x in. horizontal junction box, or a mm x mm standard European junction box. Switches allow manual control of system operation and fan speed. APPCATO The T7 and T7 Thermostats are designed for on/off control of the valve, or the valve and fan in -pipe fan-coil applications and also one-stage compressors in DX-type equipment. The T and T Thermostats are designed for series 0 floating control of the valve and fan in -pipe fan-coil applications, and also variable air volume (VAV) equipment (M, M). The thermostat operates an on/off or Series 0 valve to provide control at the desired setpoint temperature. Heat/cool models are available with constant or cycled fan operation. The fan is wired to run continuously on cool only models. Models are available with either a three-speed fan selector switch with low, medium and high settings, or onespeed only. On models with a system on/off switch, the fan can be powered off. Digital display of room ambient temperature in C. Digital display of user selected temperature setting on demand. Capability to display temperature sensor failure for easier troubleshooting. Capability to select minimum relay off-times for compressor short cycle protection (only T7 and T7). EEPROM permanently retains user settings in the event of power loss. Direct line voltage, 0 to 0 Vac, 0/0 Hz power input (only T7 and T7). Controls Honeywell V0 and VC000 Series Valves, M and M damper actuators, and compressor starters/relays up to A full load rating (only T and T). Contents Application... Features... Specifications... Ordering nformation... nstallation... Operation... 7 Checkout
2 T7A, T7A,B, TA,B, TB DGTA -CO THERMOSTATS SPECFCATOS MPORTAT The specifications given in this publication do not include normal manufacturing tolerances. Therefore, this unit may not exactly match listed specifications. This product is tested and calibrated under closely controlled conditions, and some minor differences in performance can be expected if those conditions are changed. Models: See Table. Enclosure: Two-piece plastic housing. Dimensions: See Fig.. Setpoint Range: 0 C to 0 C. Humidity Range: % to % RH, non-condensing. System Switches and Fan Speeds: See Table. nput Voltage: T7, T7: 0 to 0 Vac, ±0%, 0/0 Hz. T, T: to 0 Vac (Heat/Cool Thermostat). 0 to 0 Vac (Fan). Operational ife: Thermostat Contacts (at 0 to 0V): Greater than 00,000 cycles (all loads). Manually-Operated Switches: Greater than 0,000 operations. Mounting (Direct): Wall-mount. in. x in. junction box. mm x mm standard European junction box. Table. Model Specifications. Switches Series OS umber Application a Fan Operation Card Key System On/Off Fan Speed Heat/Cool XE T7A00 Cool constant o Yes -speed o T7A0 Cool constant o o -speed o T7A0 Cool constant Yes Yes -speed o T7A007 Cool constant o Yes -speed o T7A0 Cool constant Yes Yes -speed o T7A0 Cool constant o o -speed o T7B00 Heat/Cool cycled Yes Yes -speed Yes T7B0 Heat/Cool cycled o Yes -speed Yes T7B0 Heat/Cool cycled o o -speed Yes T7B0 Heat/Cool constant Yes Yes -speed Yes T7B07 Heat/Cool constant o Yes -speed Yes T7B0 Heat/Cool constant o o -speed Yes XE00 TA000 Cool b constant Yes Yes -speed o TB00 Heat/Cool b constant Yes Yes -speed Yes TB007 Heat/Cool b constant Yes Yes -speed Yes a Controls V0 and VC000 Series Valves or On/Off relays. b Series 0 modulating output. ORDERG FORMATO When purchasing replacement and modernization products from your TRADEE wholesaler or distributor, refer to the TRADEE Catalog or price sheets for complete ordering number. f you have additional questions, need further information, or would like to comment on our products or services, please write or phone:. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).. Honeywell Customer Care Douglas Drive orth Minneapolis, Minnesota - n Canada Honeywell imited/honeywell imitée, Dynamic Drive, Scarborough, Ontario MV Z. nternational Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, Germany, Japan, Mexico, etherlands, Spain, Taiwan, United Kingdom, U.S.A. -07
3 T7A, T7A,B, TA,B, TB DGTA -CO THERMOSTATS Wiring: Up to ten screw-in terminals per unit. Accepts two. mm wires per terminal. Temperature Ratings: Ambient: C to C. Shipping and Storage: -0 C to C. OTE: A display of SF indicates space temperature outside of the operating range. The device ceases to operate. Hotel Card Key nput: Temperature Setpoint Range: C to 0 C. Dry Contact: Vdc, 000 ohms maximum contact resistance. Performance: Control Temperature: ±0.7 C at C with 0% load. Output Ratings: T7, T7: 0 to 0 Vac, A run, A inrush. T, T: Vac, A run, A inrush (Heat/Cool Thermostat). 0 to 0 Vac, A run, A inrush (Fan). System Components: V0, VC0, VC0 Fan-Coil Valves (on/off models). VC Fan-Coil Valves (Series 0 models). M, M Damper Actuators (Series 0 models). STAATO When nstalling this Product.... Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.. Check the ratings given in the instructions and on the product to make sure the product is suitable for your application.. nstaller must be a trained, experienced service technician.. After installation is complete, check out product operation as provided in these instructions. CAUTO Electrical Shock or Equipment Damage Hazard. ow voltage can shock individuals or short equipment circuitry. Disconnect power supply before installation. OTE: O evel only for appearance. The thermostat functions normally even when not level. O YES FEET [. METERS] O MPORTAT All wiring must agree with applicable codes, ordinances and regulations. This thermostat is a precision instrument and was adjusted at the factory. Handle it carefully. Select Thermostat ocation Select a location for the thermostat about ft (.m) above the floor in an area with good air circulation at average temperature. See Fig.. Fig.. Select thermostat location. M Do not install the thermostat where it can be affected by: Drafts or dead spots behind doors and in corners. Hot or cold air from ducts. Radiant heat from sun or appliances. Concealed pipes and chimneys. Unheated (uncooled) areas such as an outside wall behind the thermostat. -/ () -7/ (7) -/ () -/ (0) -/ () -/ () M0A Fig.. T7, T7, T, and T dimensions (in mm). -07
4 T7A, T7A,B, TA,B, TB DGTA -CO THERMOSTATS Mounting The XE/XE00 Thermostats can be mounted directly on the wall, or horizontally on either a in. x in. junction box, or a mm x mm standard European junction box. Mounting screws and draw nuts are provided. Flush Mount To mount the thermostat to the wall surface or to a junction box flush with the wall:. nsert screws through the mounting holes. See Fig... Tighten the screws. Removing the Thermostat (Fig. ) MPORTAT mproper removal of the thermostat from the subbase can damage the device. To remove the thermostat from the base, proceed as follows:. Pry the left side of the thermostat away from the base.. Pry the right side of the thermostat away from the base.. Use both hands to pull the thermostat straight away from the base. Recessed Mount To mount the thermostat to a recessed junction box:. nsert screws through the mounting holes. See Fig... Position the draw nut between the junction box and the subbase and tighten it. M Fig.. Removing thermostat from subbase. M0A Fig.. Mounting thermostat. Wiring CAUTO Electrical Shock or Equipment Damage Hazard. ow voltage can shock individuals or short equipment circuitry. Disconnect power supply before installation. MPORTAT Use a. mm gauge maximum wire for wiring the T7, T7, T, and T Thermostats. Wire the thermostat as follows:. Wire the subbase through the center entrance hole. OTE: Wiring terminals are straight-in screw type and are designed to accept two. mm wires per terminal.. When wiring is complete, attach the thermostat to the subbase: a. ocate the two center side holes on the back of the thermostat. b. Align the holes with the two subbase side tabs. c. Press down firmly and snap the thermostat into place. OTE: Refer to Fig. through for typical wiring diagrams. T7A007 / T7A0 O/OFF REAY O OFF VAVE PROVDE DSCOECT MEAS AD OVEROAD PROTECTO AS REQURED. PROVDED O T7A0. COTACT COSURE AT TERMAS 0, RETURS THERMOSTAT TO EERGY SAVGS SETTG. M0 Fig.. T7A007 and T7A0 cool-off wiring diagram with three-speed fan. 7 0 VC V -07
5 T7A, T7A,B, TA,B, TB DGTA -CO THERMOSTATS T7A V T7A00 / T7A V REAY VC0XX 7 0 O/OFF REAY O OFF VAVE 7 0 VC0 PROVDE DSCOECT MEAS AD OVEROAD PROTECTO AS REQURED. M0A Fig.. T7A0 cool-continuous on wiring diagram with three-speed fan. T7A0 REAY PROVDE DSCOECT MEAS AD OVEROAD PROTECTO AS REQURED. Fig. 7. T7A0 cool-continuous on wiring diagram with single-speed fan. 7 0 VC0XX 0...0V M0A PROVDE DSCOECT MEAS AD OVEROAD PROTECTO AS REQURED. PROVDED O T7A0. COTACT COSURE AT TERMAS 0, RETURS THERMOSTAT TO EERGY SAVGS SETTG. M0 Fig.. T7A00 and T7A0 cool-off wiring diagram with single-speed fan. T7B00/T7B0/T7B0/T7B07 PROVDE DSCOECT MEAS AD OVEROAD PROTECTO AS REQURED. HEAT HEAT/ O/OFF O OFF REAY /HEAT VAVE PROVDED O T7B00 AD T7B0. COTACT COSURE AT TERMAS 0, RETURS THERMOSTAT TO EERGY SAVGS SETTG. T7B00 AD T7B0 CYCE WTH HEAT/ SYSTEM. OTHER MODES RU COSTATY. 7 0 VC0XX 0...0V M07A Fig.. T7B00 and T7B0 cool-heat-off wiring diagram with three-speed cycled fan. -07
6 T7A, T7A,B, TA,B, TB DGTA -CO THERMOSTATS T7B0/T7B V TB HEAT HEAT/ REAY /HEAT VC0XX 7 HEAT HEAT/ REAY REAY /HEAT VAC VC 0...0V 0 O 7 PROVDE DSCOECT MEAS AD OVEROAD PROTECTO AS REQURED. T7B0 CYCES WTH HEAT/ SYSTEM. T7B0 RUS COSTATY. M0A Fig. 0. T7B0 cool-heat wiring diagram with three-speed cycled fan. TA A WRG MUST COMPY WTH OCA WRG AD ORDACES. O/OFF REAY REAY O PROVDED O SOME MODES. COTACT COSURE AT TERMAS 0, RETURS THERMOSTAT TO EERGY SAVGS SETTG. Fig.. TA000 cool-off wiring diagram with single-speed fan. /HEAT 7 0 VAC 0...0V VC M7A A WRG MUST COMPY WTH OCA WRG AD ORDACES. O/OFF PROVDED O SOME MODES. COTACT COSURE AT TERMAS 0, RETURS THERMOSTAT TO EERGY SAVGS SETTG. Fig.. TB00 cool-heat-off wiring diagram with single-speed fan. TB HEAT HEAT/ O/OFF REAY O REAY /HEAT VAC M0A 0...0V VC A WRG MUST COMPY WTH OCA WRG AD ORDACES. PROVDED O SOME MODES. COTACT COSURE AT TERMAS 0, RETURS THERMOSTAT TO EERGY SAVGS SETTG. M7A Fig.. TB007 cool-heat-off wiring diagram with three-speed fan. -07
7 T7A, T7A,B, TA,B, TB DGTA -CO THERMOSTATS OPERATO Proportional Plus ntegral Control The XE/XE00 Digital Fan-Coil Thermostats actually control closer to the setpoint than a conventional control, because the heat anticipator is replaced by proportional plus integral control. Proportional plus integral action eliminates the difference between the temperature setting and effective control point by adjusting the on-time of the cooling output until the control point matches the setpoint. The XE/XE00 Thermostats maintain the space temperature within 0.7 C of the setpoint. This control performance accuracy provides improved occupant comfort and energy savings. On/Off Models These models are intended for use in -pipe fan-coil and - pipe compressor applications with line voltage actuators. These models provide on/off control. They have a fixed cycle rate of cycles per hour (cph) at 0 percent load. Series 0 Models These models are intended for use in fan-coil applications with Vac series 0 actuators. These models provide modulating control of valves or dampers. The Vac series 0 actuator can have timings between 7 and 7 seconds. They have a fixed cycle rate of cph at 0 percent load. OTE: The control algorithm is optimized for 7 seconds. Settings Temperature (Comfort) Setpoint The temperature setpoint for desired room comfort can be adjusted between 0 C and 0 C by using the! and " keys. The temperature setpoint can be changed by pressing the! key to increase the setpoint, or pressing the " key to decrease the setpoint. The temperature setpoint indicated on the display is based on the / (heat /cool) switch position. Hotel Card Key Setting and Operation The XE/XE00 Thermostats accept an external card key input that overrides the temperature setting to a user/installer defined heating and cooling temperature for increased energy savings. The thermostat default operation is with the comfort setting. f a card key input is connected to terminals 0 and, the XE/XE00 Thermostats control to the comfort (occupied) or energy saving (unoccupied) setting based on a contact closure. Contact closure at terminals 0 and results in control to the energy saving (unoccupied) setting. See Fig.. 0 Switches M0 Fan Switch / / (ow/medium/high): Fan speed switch on three-speed models allows selection of three different settings. Single-speed fan models with system on/off switch can be switched off. System Switch / (Off/On): Fan-Coil equipment is powered off or on. When in the position, terminal five is powered to close the VC000 Valve (on/off models only). Heat/Cool Switch / (Heat/Cool): Thermostat switches between heat setpoint and cool setpoint. Fan-coil equipment provides heating or cooling. Fig.. Hotel card key input. The default settings for both comfort and energy savings are shown in Table. System Operation Table. Thermostat Default Settings. Comfort Setpoint Heating 0 C C Cooling C C Energy Savings Setpoint The installer can adjust the energy saving settings between º and 0 C. Settings are described in the nstaller Setup Mode section. Minimum Off-Time (T7 and T7 only) The T7 and T7 provide minimum relay off-times for compressor short cycle protection. This prevents the relay from energizing the load for the installer selected time. o minimum off-time is provided as the default setting (default time is zero minutes). The minimum off-time duration can be adjusted by the installer for 0,,, or minutes. Adjustment is described in the nstaller Setup Mode section. 7-07
8 T7A, T7A,B, TA,B, TB DGTA -CO THERMOSTATS nstaller Setup Mode Use the installer setup mode to make adjustments to the hotel card key input heating and cooling setpoints and the minimum off-time settings. OTE: When a parameter setting is changed and no additional entries are made for five seconds, the parameter (c, c, c) displays again. f no activity is detected for another five seconds, the device exits from the installer setup mode. To enter the installer setup mode:. Press " to change the temperature setpoint to C.. Wait until the room temperature is displayed.. Press "! simultaneously and hold approximately three seconds until c is displayed.. Press " to display c to override the high setpoint for cooling.. Press "! simultaneously.. Press " or! to change the high setpoint. 7. Wait five seconds until c is displayed.. Press! to display c to override the low setpoint for heating.. Press "! simultaneously. 0. Press " or! to change the low setpoint.. Wait five seconds until c is displayed.. Press! to display c to change the minimum off-time.. Press "! simultaneously.. Press " or! to change the minimum off-time. CHECKOUT CAUTO Equipment Damage Hazard. Operation at low temperatures can cause fan coil damage. This thermostat is not a safety device. Do not use it where the space temperature is outside of the device operating range. A display of SF indicates a space temperature outside of the thermostat operating range ( C to C). With SF displayed, the thermostat ceases to operate. CAUTO Equipment Damage Hazard. mproper operation can cause compressor damage. Do not operate cooling if outdoor temperature is below 0ºF (0 C). Refer to manufacturer recommendations. To avoid compressor damage, allow the compressor to remain off for five minutes before restarting. MPORTAT Ensure all equipment responds to the thermostat. Cooling On models with cool-only, or heat ( ) and cool ( ):. f the device has a system switch, slide it to on ( ).. f the device has a heat/cool switch, slide it to cool ( ).. Press the " key to lower the temperature setting several degrees below the room temperature. After approximately ten seconds, the cooling equipment should start.. Press the! key to raise the temperature setting above the room temperature. The cooling system should shut down. Heating On models with heat ( ) and cool ( ):. f the device has a system switch, slide it to on ( ).. Slide the heat/cool switch to heat ( ).. Press and hold the! key to raise the temperature setting several degrees above the room temperature. After approximately ten seconds, the heating equipment should start.. Press the " key to lower the temperature setting below the room temperature. Heating equipment should stop. Automation and Control Solutions Honeywell nternational nc. Honeywell imited-honeywell imitée Douglas Drive orth Dynamic Drive Golden Valley, M Scarborough, Ontario MV Z customer.honeywell.com U.S. Registered Trademark 00 Honeywell nternational nc. -07 S.A. Rev. 0-0
T6572A, T6573A,B, T6992A,B, T6993B Digital Fan-Coil Thermostats
TA, TA,B, TA,B, TB Digital Fan-Coil Thermostats XE/XE00 SERES FEATURES PRODUCT DATA Attractive modern styling with digital display makes the thermostat ideal for offices or hotels. Hotel card key input
More informationT7984 A,B,C Electronic Modulating Control Thermostats
T7984 A,B,C Electronic Modulating Control Thermostats FEATURES PRODUCT DATA APPLICATION These microprocessor-based thermostats provide proportional - integral (PI) individual room temperature control in
More informationT6984F,G Electronic Floating Control Thermostats
T6984F,G Electronic Floating Control Thermostats FEATURES PRODUCT DATA P+I control action provides accurate, stable room temperature control. Used with ML644 Series 60 Direct Coupled Damper Actuators.
More informationC7232A,B Sensor and Controller CARBON DIOXIDE SENSOR
C7232A,B Sensor and Controller CARBON DIOXIDE SENSOR PRODUCT DATA C7232A C7232B FEATURES Used for CO 2 based ventilation control. Models available with LCD that provides sensor readings and status information.
More informationT7079A,B Solid State Remote Temperature Controllers
T7079A,B Solid State Remote Temperature Controllers FEATURES PRODUCT DATA Switch selection of heat or cool mode. Temperature sensing up to 400 feet. Does not require field calibration. 0K NTC temperature
More informationT6984 A,D,E Electronic Floating Control Thermostats
T6984 A,D,E Electronic Floating Control Thermostats FEATURES PRODUCT DATA PI (proportional and integral) control action provides accurate, stable room temperature control. T6984 models are used with Series
More informationT4398A,B High Performance Electric Heat Thermostats
T498A,B High Performance Electric Heat Thermostats FEATURES PRODUCT DATA Controls both fan-forced and baseboard electric heaters. Temperature-responsive, vapor-filled dual diaphragm sensing element provides
More informationT8411R Electronic Heat Pump Thermostat
T84R Electronic Heat Pump Thermostat INSTALLATION INSTRUCTIONS The T84R Heat Pump Thermostat provides 24V control of two-stage heating and one-stage cooling heat pump system with manual changeover from
More informationT4098A,B Deluxe Electric Heat Thermostats
T4098A,B Deluxe Electric Heat Thermostats FEATURES PRODUCT DATA Controls both fan-forced and baseboard electric heaters. Temperature-responsive, vapor-filled dual diaphragm sensing element provides 2 F
More informationXE99 SERIES FAN-COIL THERMOSTATS 2-PIPE & 4-PIPE FAN-COIL CONTROL FEATURES APPLICATION PRODUCT SPECIFICATION SHEET
XE SERIES FA-COI THERMOSTATS -PIPE & -PIPE FA-COI COTRO APPICATIO The XE range of digital thermostats is designed for control of the fan, valves, compressor or auxiliary electric heater in fan-coil and
More informationT6590 Series FAN-COIL CONTROLLER
T6590 Series FANCOIL CONTROLLER PRODUCT DATA FEATURES APPLICATIONS The T6590 range of digital thermostats is designed to control the valves, fan and auxiliary electric heater within fancoil systems. Modern,
More informationT6590 Series FAN-COIL CONTROLLER FEATURES APPLICATIONS PRODUCT DATA
T6590 Series FANCOIL CONTROLLER PRODUCT DATA FEATURES APPLICATIONS The T6590 range of digital thermostats is designed to control the valves, fan and auxiliary electric heater within fancoil systems. Modern,
More informationT8011R Programmable Heat Pump Thermostat
T8011R Programmable Heat Pump Thermostat FEATURES PRODUCT DATA APPLICATION The T8011R Heat Pump Thermostat provides 24 Vac control of a two-stage heating and one-stage cooling heat pump system with manual
More informationThe T6140A,B Remote Bulb Temperature Controller
T640A,B Remote Bulb Temperature Controller The T640A,B Remote Bulb Temperature Controller is used as a unit mount temperature controller in electric heat, fan coil, room air conditioner applications, cold
More informationC7232A,B Sensor and Controller
C7232A,B Sensor and Controller CARBON DIOXIDE SENSOR FEATURES PRODUCT DATA C7232A C7232B Used for CO 2 based ventilation control. Models available with LCD that provides sensor readings and status information.
More informationCR7075 Two-Stage Lighting Controller
CR707 Two-Stage Lighting Controller FEATURES PRODUCT DATA Light intensity threshold levels field-adjustable by user. Independent Time of Day (TOD) override inputs. Optimum start/stop of lighting loads.
More informationT7200D,E Series 2000 Commercial Microelectronic Thermostats
T7200D,E Series 2000 Commercial Microelectronic Thermostats INSTALLATION INSTRUCTIONS APPLICATION The T7200D,E Thermostats provide electronic control of 24 Vac commercial single-zone heating, ventilating
More informationT874 Multistage Thermostat and Q674 Subbase
SUPER TRADELINE T874 Multistage Thermostat and Q674 Subbase Application The T874D Thermostat and Q674E Subbase provide 4 to 30 Vac control of standard stage heating and stage cooling systems. The Y594D
More informationC7031D,G,J C7041B,C,D,F,J,K,P,R Series 2000 Electronic Temperature Sensors
C703D,G,J C70B,C,D,F,J,K,P,R Series 2000 Electronic Temperature Sensors PRODUCT DATA C703D, C70D C70B,C C70R C703G, C70F C70P FEATURES C703D, C70D for immersion mounting sense water temperature. C703G,
More informationT8600D Chronotherm IV Deluxe Programmable Thermostats
T8600D Chronotherm IV Deluxe mable Thermostats APPLICATION INSTALLATION INSTRUCTIONS The T8600 Chronotherm IV Deluxe mable Thermostat provides electronic control of 24 Vac singlestage heating and cooling
More informationL8005A,B; LS8005A,C,D Electronic Pool and Spa Controllers
Electronic Pool and Spa Controllers The L8005A,B and LS8005A,C,D Electronic Pool and Spa Controllers are used in pool, spa, and hot tub applications to control water temperature. Remote Potentiometer L8005A,B
More informationDeluxe Programmable Heat Pump Thermostat T8611M
APPLICATION Deluxe mable Heat Pump Thermostat T8611M INSTALLATION INSTRUCTIONS The T8611M Deluxe mable Heat Pump Thermostat provides electronic control of 24 Vac single-zone two compressor or two speed
More informationC554A Cadmium Sulfide Flame Detector
C554A Cadmium Sulfide Flame Detector FEATURES PRODUCT DATA Cadmium sulfide sensing element provides faster response than bimetal sensors. On flame failure, the cad cell causes the oil primary control to
More informationDeluxe Programmable Thermostats
Deluxe mable Thermostats T8602D INSTALLATION INSTRUCTIONS APPLICATION The T8602D IV Deluxe mable Thermostat provides electronic control of 24 Vac single-stage heating and cooling systems or 750 mv heating
More informationT8611M Deluxe Programmable Heat Pump Thermostats
T8611M Deluxe mable Heat Pump Thermostats INSTALLATION INSTRUCTIONS APPLICATION The T8611M Deluxe mable Heat Pump Thermostat provides electronic control of 24 Vac single-zone two compressor or two speed
More informationT8624D Chronotherm IV Deluxe Programmable Multistage Thermostats
T8624D Chronotherm IV Deluxe mable Multistage Thermostats INSTALLATION INSTRUCTIONS APPLICATION The T8624D Chronotherm IV Deluxe mable Multistage Thermostats provides electronic control of 24 Vac single-zone
More informationT8602C Chronotherm IV Deluxe Programmable Thermostats
T8602C Chronotherm IV Deluxe mable Thermostats INSTALLATION INSTRUCTIONS APPLICATION The T8602 Chronotherm IV Deluxe mable Thermostat provides electronic control of 24 Vac single-stage heating and cooling
More informationT834C Heating-Cooling Thermostat
M3375 M3375 TRADELINE T834C Heating-Cooling Thermostat Application T834C Thermostats control 4 to 30 Vac single-stage heating-cooling systems. See Table for specific models and applications. An spdt mercury
More informationT8401C Electronic Thermostats
T8401C Electronic Thermostats INSTALLATION INSTRUCTIONS APPLICATION The T8401C Thermostat provides single-stage, nonprogrammable temperature control for 24 Vac heating cooling systems with manual changeover
More informationT8611G Chronotherm Deluxe Zoning Heat Pump Thermostat
T8611G Chronotherm Deluxe Zoning Heat Pump Thermostat INSTALLATION INSTRUCTIONS APPLICATION The T8611G Chronotherm Deluxe Zoning Heat Pump Thermostat provides electronic control of 24 Vac zoned heat pump
More informationT8524 Deluxe Electronic Thermostat
T8524 Deluxe Electronic Thermostat PRODUCT DATA T8524 FEATURES AND BENEFITS APPLICATION The T8524 Deluxe Electronic Thermostat provides electronic control of 18 to 30 Vac multistage heating and cooling
More informationCommercial/Industrial Combustion Control Level Three Announcement
Commercial/Industrial Combustion Control Level Three Announcement SUBJECT: C6097 requiring venting Model Numbers Affected: C6097A and B Ref. Number L3-08-006 Issue Date 12/9/08 Author P.Yuen/L.Ziller Date
More informationCommercial Touchscreen Thermostat
55,13M 1/27 Supersedes 12/25 Commercial Touchscreen Thermostat 25 Lennox Industries, Inc. Dallas, Texas, USA APPLICATION Page 1 INSTALLATION INSTRUCTIONS The Lennox Commercial Touchscreen Thermostat provides
More informationT8190A/191108AJ Heating or Cooling Thermostat/Wallplate; T8190A/Q682B Heating/Cooling Thermostat/Subbase
M3375 M3375 T890A/908AJ Heating or Cooling Thermostat/Wallplate; T890A/Q68B Heating/Cooling Thermostat/Subbase Installation Instructions for the Trained Service Technician. Preparation NOTE: Order Q68B
More informationSolid Core and Split Core 4-20 ma Output Current Sensors CTS-20; CTP-20
Solid Core and Split Core 4-20 ma Output Current Sensors CTS-20; CTP-20 PRODUCT DATA FEATURES Solid or split core loop-powered current transmitters Fast response time Integral DIN rail mounting flange
More informationSolid Core and Split Core Fixed Current Status Switches CSS-O,C; CSP-O,C -F (FIXED) SERIES
Solid Core and Split Core Fixed Current Status Switches CSS-O,C; CSP-O,C -F (FIXED) SERIES PRODUCT DATA FEATURES Solid and Split Core, Fixed Current go/no go switches. Very low operating trip points. LED
More informationT4360G, T6360D, T6360E Line Voltage Thermostat
T4360G, T6360D, T6360E ine Voltage Thermostat PRODUCT DATA FEATURES Models available for heat only, cool only and heat pump systems. Fan models for air circulation. Three-speed fan model to improve circulation
More informationT6865 Series Large LCD Digital Thermostat 24 VAC 2-pipe fan coil control
T6865 Series Large LCD Digital Thermostat 24 VAC 2-pipe fan coil control Application Data sheet T6865 digital thermostats are designed for application of 3-speed fan and modulating valves in fan coil system.
More informationVisionPRO 8000 with Wi-Fi
VisionPRO 8000 with Wi-Fi FEATURES PRODUCT DATA Thermostat acquires weather data through either a wired sensor or an Internet connection, making for a truly universal installation. U1 Terminals One set
More informationM6063A Compact Rotary Mixing Valve Actuator
M6063A Compact Rotary Mixing Valve Actuator PRODUC DAA FEAURES: 24 Vac floating input for automatic control. Single screw attachment to V5442 valve body. Multi-poise mounting. Color-coded position indicator.
More informationSolid Core and Split Core 0-5, 0-10 Vdc Output Current Sensors CTS-05,10; CTP-05,-10
Solid Core and Split Core 0-5, 0-10 Vdc Output Current Sensors CTS-05,10; CTP-05,-10 DESCRIPTION FEATURES PRODUCT DATA Solid and Split Core Vdc Output Current Transmitters. Fast Response Time. Integral
More informationT7100D Microelectronic Conventional Thermostat
T7100D Microelectronic Conventional Thermostat INSTALLATION INSTRUCTIONS APPLICATION A. ENGAGE TABS AT TOP OF THERMOSTAT AND SUBBASE. The T7100D Microelectronic Thermostat provides electronic control of
More informationT7300F Series 2000 Commercial Microelectronic Conventional or Heat Pump Thermostat
T7300F Series 2000 Commercial Microelectronic Conventional or Heat Pump Thermostat INSTALLATION INSTRUCTIONS APPLICATION The T7300F Thermostat provides electronic control of 24 Vac commercial single zone
More informationL8151A Triple Aquastat Relay
L85A riple Aquastat Relay he L85A is a remote bulb controller for use with hydronic heating systems that include domestic hot water service. Provides high limit, low limit, and circulator control for maintaining
More informationF150E Media Air Cleaner
whole-house air quality system FEATURES F150E Media Air Cleaner PRODUCT DATA APPLICATION F150E W8600A AIRWATCH W8600A AIRWATCH filter change indicator. High efficiency media filter captures particles as
More informationTable 1. Serie of Digital Room Thermostats.
Digital Room Thermostats INSTALLATION MANUAL APPLICATION DR is a serie of Digital Room Thermostats, provides a single stage, temperature control. Table 1 shows all the available models. All models can
More informationTG509, TG510, TG511, TG512 Versaguard Universal Thermostat Guards
TG509, TG510, TG511, TG512 Versaguard Universal Thermostat Guards FEATURES PRODUCT DATA TG509 TG511D TG510A TG512B Available in four sizes: mini, small, medium and large, to fit virtually all thermostats.
More informationC6097A,B Pressure Switches
C6097A,B Pressure Switches FEATURES PRODUCT DATA APPLICATION The C6097 Pressure Switches are safety devices used in positive-pressure or differential-pressure systems to sense gas or air pressure changes.
More informationtcu.z Commercial Programmable Thermostat Installation Instructions
Application Mercury Notice Installation The tcu.z Commercial Programmable Thermostat controls 24-VAC commercial single-zone heating, ventilating, and air conditioning (HVAC) equipment. It consists of a
More informationT4031A,B,P; T6031A,B Refrigeration Temperature Controllers
T4031A,B,P; T6031A,B Refrigeration Temperature Controllers FEATURES PRODUCT DATA Wide control temperature range is suitable for controlling ducts, tanks, freezers, coolers, display cases. and defrost termination.
More informationEL7611A/EL7612A Ultrasonic Occupancy Sensors and EL7621A Power Pack PRODUCT DATA
EL7611A/EL7612A Ultrasonic Occupancy Sensors and PRODUCT DATA Proven 30% to 60% utility cost savings because lights are on only when needed. Low initial cost allows fast payback. Models available for 1000
More informationCT500 Electronic Thermostat
CT500 Electronic Thermostat OWNER'S GUIDE MERCURY NOTICE If this control is replacing a control that contains mercury in a sealed tube, do not place your old control in the trash. Dispose of it properly.
More informationHTW-% Series Large LCD Digital Thermostat 110VAC/220 VAC 2-pipe/4-pipe fan coil control. Features
HOTOWE HTW-%-000 Series arge CD Digital Thermostat 0VAC/0 VAC -pipe/-pipe fan coil control Data sheet Application This digital thermostats are designed for application of -speed fan and valves in fan coil
More informationQ7300L Series 2000 Commercial Thermostat Subbases
Q700L Series 2000 Commercial hermostat Subbases INSALLAION INSRUCIONS APPLICAION he Q700L hermostat Subbase is used with the 700D,F hermostat to provide electronic control of commercial 24 Vac single zone
More informationR7824, R7847, R7848, R7849, R7851, R7852, R7861, R7886 Amplifiers for 7800 SERIES and R7140 Relay Modules
R7824, R7847, R7848, R7849, R7851, R7852, R7861, R7886 Amplifiers for 7800 SERIES and R7140 Relay Modules PRODUCT DATA indicate the presence of flame when used with 7800 SERIES and R7140 Relay Modules.
More informationC7007A, C7008A, C7009A Flame Rod Holder & Flame Rod Assemblies
Flame Rod Holder & Flame Rod Assemblies The small size of these devices enable their application to flame detection in installations where space is limited. The holder and flame rod assemblies facilitate
More informationF25F Media Air Cleaner
F25F Media Air Cleaner FEATURES PRODUCT DATA High efficiency media filter captures particles as small as 1.0 micron. Efficiency and arrestance ratings based on the American Society of Heating, Refrigerating
More informationRA889A Switching Relay
Switching Relay FEATURES PRODUT DATA High load switching capability. Troubleshooting LED. Push-to-test button. Replaceable transformer fuse. Long-life D relay drive control technology. Relay for use with
More informationH1008A,D Automatic Humidity Controls
H00A,D Automatic Humidity Controls FEATURES PRODUCT DATA The H00A,D provides automatic control for by-pass flow-through, powered flow-through, steam and drum humidifiers in central heating systems. The
More informationCAUTION: ELECTRICAL HAZARD
R R Installation Guide 53DF50-HW hermostat System ypes Cool Only (single stage) Heat Pump (with electric heat) CAUION: ELECRICAL HAZARD Can cause electrical shock or equipment damage. Disconnect power
More informationT6861 Series Large LCD Digital Thermostat Two stage Cool Control. Product specification sheet. Features. Application.
T6861 Series Large LCD Digital Thermostat Two stage Cool Control Product specification sheet Application T6861Series digital thermostats are designed for application of 3-speed fan and valves in fan coil
More informationT6862 Series Large LCD Digital Thermostat Time Programmable 2-pipe/4-pipe fan coil control
T Series arge CD Digital Thermostat Time Programmable -pipe/-pipe fan coil control Data sheet Application T digital thermostats are designed for application of -speed fan and s in fan coil system. Including:
More informationQ7300H Series 2000 Commercial Thermostat Subbases
Q700H Series 000 Commercial hermostat Subbases INSALLAION INSRUCIONS APPLICAION he Q700H hermostat Subbases are used with 700F hermostats to provide electronic control of commercial Vac single or multistage
More informationT8400C and T8401C Electronic Thermostats
T8400 and T840 Electronic Thermostats INSTALLATION INSTUTIONS The T8400 and T840 Thermostats provide singlestage, non-programmable temperature control for 4V heating-cooling systems with manual changeover
More informationF200E Charged-Media Air Cleaner
whole-house air quality system F200E Charged-Media Air Cleaner PRODUCT DATA FEATURES APPLICATION The F200E Charged-Media Air Cleaner captures a significant amount of the air-borne particles from the air
More informationT7351 Programmable Thermostat FOR CONVENTIONAL/HEAT PUMP SYSTEMS
T7351 Programmable Thermostat FOR CONVENTIONAL/HEAT PUMP SYSTEMS 63-2652 FEATURES Typically used in buildings (including: restaurants, shopping malls, office buildings and banks) under 55,000 square feet.
More informationT8400C Universal Electronic Thermostats
T8400C Universal Electronic Thermostats INSTALLATIN INSTUCTINS APPLICATIN The T8400C Universal Thermostat provides single-stage, non-programmable temperature control for 24 Vac heating-cooling systems
More informationT8000C Programmable Thermostat
T8000C Programmable Thermostat APPLICATIN The T8000C Thermostat provides single-stage, programmable temperature control for 24 Vac heating-cooling systems with manual changeover from heat to cool. Heating
More informationINSTALLATION MANUAL. Need Help? This manual covers the following models: T755. Power Type. Thermostat Applications Guide. Page.
INSTALLATION MANUAL This manual covers the following models: T755 Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux. or
More informationR7824, R7847, R7848, R7849, R7851, R7852, R7861, R7886 Amplifiers for 7800 SERIES and R7140 Relay Modules
R7824, R7847, R7848, R7849, R7851, R7852, R7861, R7886 Amplifiers for 7800 SERIES and R7140 Relay Modules PRODUCT DATA indicate the presence of flame when used with 7800 SERIES and R7140 Relay Modules.
More informationINSTALLATION MANUAL. This manual covers TopTech models: TT-N-851. Need Help? Power Type. Thermostat Applications Guide. Page.
INSTALLATION MANUAL This manual covers TopTech models: TT-N-851 Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux. or
More informationINSTALLATION MANUAL. Need Help? This manual covers TopTech models: TT-N-721 and T721. Power Type. Thermostat Applications Guide.
INSTALLATION MANUAL This manual covers TopTech models: TT-N-721 and T721 Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump ( Aux. or Emergency Heat) Heat Pump (with Aux.
More informationT8112 Programmable Thermostat
T8112 Programmable Thermostat FEATUES PODUCT DATA HEAT-OFF-COOL system switch. AUTO-ON fan switch. Separate programs for weekdays and weekends (5 day/2 day). Digital LCD display. Easy to program and install.
More informationAQ255 and AQ257 Series Expansion Zoning Panels
AQ55 and AQ57 Series Expansion Zoning Panels PRODUCT DATA AQ574B AQ558B FEATURES The AQ55/AQ57 Series Expansion Zoning Panels have the following features: Availability of 4 Expansion Zoning Panels. Zone
More informationINSTALLATION MANUAL. This manual covers TopTech models: TT-S-755H. Need Help? Thermostat Applications Guide. Power Type. Table of Contents.
INSTALLATION MANUAL This manual covers TopTech models: TT-S-755H Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux. or
More informationONX908PIT-V1-S1-F1/B Modulating Digital Thermostat
ONX908PIT-V1-S1-F1/B Modulating Digital Thermostat Installation and operation instructions The ONX908PIT-V1-S1-F1 modulating digital thermostats are designed to provide Proportional-Integral (PI) modulating
More informationAQ475A Aquatrol Outdoor Temperature Compensator for Boilers
A Aquatrol Temperature Compensator for s Features PRODUCT DATA Adjustable settings for boiler maximum temperature, boiler minimum temperature and outdoor low (design) temperature. Selectable Warm Weather
More informationCT2700 An Electronic Round Programmable Thermostat
CT2700 An Electronic Round Programmable Thermostat USER S GUIDE MERCURY SWITCH TYPICAL LOCATION OF A MERCURY SWITCH IN A THERMOSTAT M064 RECYCLING THERMOSTAT If this thermostat is replacing a control that
More informationINSTALLATION MANUAL. Need Help? This manual covers the following models: T725. Power Type. Thermostat Applications Guide. Page.
INSTALLATION MANUAL This manual covers the following models: T725 Thermostat Applications Guide Des cription Gas or Oil Heat Electric Furnace Heat Pump ( Aux. or Emergency Heat) Heat Pump (with Aux. or
More informationT4398A,B Precision Electric Heating Thermostat
T398A,B Precision Electric Heating Thermostat FEATURES PRODUCT DATA APPLICATION The T398 Electric Heating Thermostat provides precise, accurate line voltage control of electric heating equipment. A snap
More informationINSTALLATION MANUAL. Need Help? This manual covers the following models: T915. Power Type. Thermostat Applications Guide. Page.
INSTALLATION MANUAL This manual covers the following models: T915 Thermostat Applications Guide Des cription Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency Heat) Heat Pump (with Aux.
More informationT874A-F Multistage Thermostats; Q674A-G Subbases by Honeywell
M3375 M3375 T874A-F Multistage Thermostats; Q674A- Subbases by Honeywell Installation Instructions for the Trained Service Technician Application The T874A-F Thermostats provide 4 to 30 Vac control for
More informationT8400C Electronic Thermostat
T8400 Electronic Thermostat INSTALLATION INSTUTIONS The T8400 provides single-stage, non-programmable temperature control for 24V heating-cooling systems with manual changeover from heat to cool. Heating
More informationIS Series Pressure Sensing Switches
IS Series Pressure Sensing Switches FEATURES INSTALLATION INSTRUCTIONS IS3 PRESSURE SWITCH APPLICATION IS2 PRESSURE SWITCH The IS Series of pressure sensing switches offers the same proven compression
More informationONX908FCT-4B/220V/RC FAN COIL THERMOSTAT
X0FCT-B/0V/RC FA COI THERMOSTAT Application: Heat/cool, speed fan, -pipe fan coil unit Installation and operation instructions SPECIFICATI: Electrical Rating 0VAC Terminal oad.0 A per terminal Set point
More informationT7300F Multistage Conventional or Heat Pump Programmable Commercial Thermostat
T7300F Multistage Conventional or Heat Pump Programmable Commercial Thermostat 1.0 GENERAL 1.1 Overview GUIDE SPECIFICATION The contractor shall furnish, install, and place in operating condition an HVAC
More informationCR Series Command Relays
CR Series Command Relays FEATURES INSTALLATION INSTRUCTIONS Patented 35mm Din-rail mounting flange (US Patent 7,416,421) SPDT Form 1C Relay contacts Pilot duty rated LED status indication Stackable for
More informationZoning System Design Manual
Zoning Made Effortless 70-2321-03 Introduction The Concept of Zoning The basic principle of forced air zoning is to allow one HVAC system to be controlled by multiple thermostats, heating and cooling a
More informationHE365A,B Powered Flow-Through Humidifier
HE65A,B Powered Flow-Through Humidifier whole-house air quality system FEATURES/BENEFITS PRODUCT DATA Antimicrobial coating on pad prevents the surface growth and migration of bacteria, mold, fungus and
More informationInstructions For A and Flame Simulators
Instructions For 123514A and 203659 Flame Simulators Application Flame simulators are devices that simulate a flame by reproducing ultraviolet resistance or rectification characteristics of an actual flame.
More informationT8034C Heating/Cooling Thermostats
T8034C Heating/Cooling Thermostats INSTALLATI INSTUCTIS APPLICATI These T8034C Thermostats control 4 to 30 Vac singlestage heating-cooling systems. An spdt mercury switch makes (H) to on temperature fall
More informationINSTALLATION MANUAL. * If using remote sensors the thermostat must be hardwired. Need Help?
INSTALLATION MANUAL This manual covers the following models: T955W Master Thermostat Base Module Thermostat Applications Guide Description Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency
More informationSafety & Installation Instructions
Model 8800 Universal Communicating Thermostat Safety & Installation Instructions READ AND SAVE THESE INSTRUCTIONS Table of contents Installation Installation location recommendations... 2 Thermostat mounting...
More informationHE420A Steam Power Humidifier
READ AND SAVE THESE INSTRUCTIONS HE420A Steam Power Humidifier OWNER S GUIDE 69-1112-2 HE420A STEAM POWER HUMIDIFIER WELCOME... to the comfortable world of humidified air. With your Honeywell humidifier
More informationT-32-TS Touchscreen Thermostat. Installation Manual
T-32-TS Touchscreen Thermostat Installation Manual TABLE OF CONTENTS Introduction...4 Getting Started...5 Installing the Thermostat...6, 8 Disassembly...6 Thermostat Location...6 Mounting the Subbase...6,
More informationOutdoor Reset IQ Option Card, p/n
Outdoor Reset IQ Option Card, p/n 102723-01 Instruction Sheet CONTENTS Application... 1 General... 2 How it Works... 3 Installation.... 5 Wiring... 7 User Interface... 10 Using IQ Option Panel Display...
More informationHome and Building Control Home and Building Control Helping You Control Your World
M3375 Home and Building Control Home and Building Control Helping You Control Your World Honeywell Inc. Honeywell Limited/Honeywell Limitée 1985 Douglas Drive No. 740 Ellesmere Road Golden Valley, MN 55422
More informationAQ250 Series Hydronic Control Panels
AQ50 Series Hydronic Control Panels PRODUCT DATA Need new photo of AQ50 PRODUCT DESCRIPTION The AQ50 easily converts a single-zone heating system into a room-by-room comfort control system, or upgrades
More informationT8112C,DElectronic ProgrammableThermostats
Honeywell T8112C,DElectronic ProgrammableThermostats APPLICATION The T8112C,D thermostats provide electronic programmable control for 24 to 30 Vac heating and cooling systems. @ RECYCLING NOTICE if this
More informationC7004B Flame Rod Holder
Honeywell These Flame Rod Holders facilitate the use of flame rods for flame proving on gas burners or gas-pilot ignited oil burners controlled by electronic flame safeguard control systems. C7004B Flame
More information