ST-602-WS-E / ST-603-WS-E

Size: px

Start display at page:

Download "ST-602-WS-E / ST-603-WS-E"

Roy McKinney
6 years ago
Views:

1 ST-602-WS-E / ST-603-WS-E Workshop Electric Fan Heater

2 ENGLISH Read The Instruction manual: When this symbol is marked on a product, it means that the instruction manual must be read. In order to avoid overheating, do not cover the heater.

3 ST-602-WS-E POWER CABLE 3. HANDLE 4. THERMOSTAT KNOB 5. CAUTION LIGHT 6. POWER LIGHT 7. FRONT GUARD 1. CORDON D ALIMENTATION 2. SÉLECTEUR DE FONCTIONS 3. POIGNÉE 4. SELECTEUR DE THERMOSTAT 5. ATTENTION LA LUMIÉRE 6. PUISSANCE DE LA LAMPE 7. PROTECTION AVANT 1. ELEKTRICITEITSSNOER 2. FUNCTIEKEUZEKNOP 3. HANDVANT 4. THERMOSTAATKNOP 5. LET OP LICHT 6. LAMPJE 7. BESCHERMING VOORZIJDE 1. CABLE DE ALIMENTACIÓN 2. SELECTOR DE FUNCIÓN 3. ASA 4. BOTÓN DEL TERMOSTATO 5. ATENCIÓN LUZ 6. POTENCIA LUZ 7. PROTECTOR FRONTAL 1. Power Cable 2. Function Selector 3. Handle 4. Thermostat Knob 5. Caution Light 6. Power Light 7. Front Guard 1. NÄTSLADD 2. FUNKTIONSVÄLJARE 3. HANDTAG 4. TERMOSTATVRED 5. FÖRSIKTIGHET LJUS 6. STRÖMLAMPA 7. FRÄMRE SKYDD 1. STRØMKABEL 3. HÅNDTAK 4. TERMOSTATKNAPP 5. FORSIKTIG LYS 6. LAMPEN 7. FRONTVERN 1. WTYCZKA 2. WYBÓR FUNKCJI 3. UCHWYT 4. TERMOSTAT 5. KONTROLKA OSTRZEGAW 6. KONTROLKA ZASILANIA 7. OSŁONA PRZEDNIA ST-603-WS-E POWER CABLE 3. HANDLE 4. THERMOSTAT KNOB 5. CAUTION LIGHT 6. POWER LIGHT 7. FRONT GUARD 8. HEATER STAND 1. CORDON D ALIMENTATION 2. SÉLECTEUR DE FONCTIONS 3. POIGNÉE 4. SELECTEUR DE THERMOSTAT 5. ATTENTION LA LUMIÉRE 6. PUISSANCE DE LA LAMPE 7. PROTECTION AVANT 8. SUPPORT DE L'APPAREIL DE CHAUFFAGE 1. ELEKTRICITEITSSNOER 2. FUNCTIEKEUZEKNOP 3. HANDVANT 4. THERMOSTAATKNOP 5. LET OP LICHT3. Handle 6. LAMPJE 7. BESCHERMING VOORZIJDE 8. KACHELVOET 1. Power Cable 2. Function Selector 4. Thermostat Knob 5. Caution Light 6. Power Light 7. Front Guard 8. Heater Stand 1. CABLE DE ALIMENTACIÓN 2. SELECTOR DE FUNCIÓN 3. ASA 4. BOTÓN DEL TERMOSTATO 5. ATENCIÓN LUZ 6. POTENCIA LUZ 7. PROTECTOR FRONTAL 8. SOPORTE DEL CALEFACTOR 1. NÄTSLADD 2. FUNKTIONSVÄLJARE 3. HANDTAG 4. TERMOSTATVRED 5. FÖRSIKTIGHET LJUS 6. STRÖMLAMPA 7. FRÄMRE SKYDD 8. STÄLL FÖR VÄRMEELEMENT 1. STRØMKABEL 3. HÅNDTAK 4. TERMOSTATKNAPP 5. FORSIKTIG LYS 6. LAMPEN 7. FRONTVERN 8. APPARATSTATIV 1. WTYCZKA 2. WYBÓR FUNKCJI 3. UCHWYT 4. TERMOSTAT 5. KONTROLKA OSTRZEGAW 6. KONTROLKA ZASILANIA 7. OSŁONA PRZEDNIA 8. STOJAK GRZEJNIKA

4 SPECIFICATIONS ST-602-WS-E ST-603-WS-E THERMAL POWER (kw) THERMAL POWER (Btu) 6,828 6,828 AIR FLOW (CMH) HEATING AREA (cu. m) 6 6 POWER (Volt / Hz) 220V - 240V / 50Hz 220V - 240V / 50Hz HEAT SETTINGS 2 2 INGRESS PROTECTION RATING (IP) IP44 IP44

5 NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE Safety Features AUTOMATIC TIP-OVER SAFETY SWITCH The tip-over switch is located inside the cabinet housing. The tip-over safety switch allows the unit to operate only when the heater is placed on a level surface. If the heater is tipped or tilted while in operation, it will automatically shut off. AUTOMATIC OVERHEAT SAFETY CONTROL This heater is equipped with safety internal heat limiting thermostat and overheat protection circuit. When a potential overheat temperature is reached, the system will automatically shut the heater off and turn the alert light on. ALERT INDICATOR LIGHT The alert light will turn on when the heater internal temperature rises to an unsafe level. If this situation occurs, make sure the heater is on a level surface and clear of all obstructions. Unplug the heater and allow it to cool down before restarting. Operation Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet environments and flammable objects. Connect the fan heater to the electrical power. Set the thermostat dial to the maximum temperature. The fan heater will switch on when the function selector dial is set to one of the two power settings. Once the room reaches the desired temperature, turn the thermostat dial back until heating element turns off. The fan will still continue to run. The thermostat is now set at your desired temperature, and the heater will continue to maintain a constant temperature. Cleaning and Maintenance Before cleaning the appliance, disconnect it from the outlet and let it cool down. The enclosure is easy to get dirty. Wipe it often with a soft sponge. For very dirty parts, wipe with a sponge dipped in < 50 C water and mild detergent, then dry the heater enclosure with a clean cloth. Be careful not to let the water enter the inside of the appliance Clean the coupler, dry and pack it in a plastic bag. In order to protect the enclosure, don t splash water onto the heater, and never use a solvent like gasoline, isoamyl acetate, toluene, etc. to clean the heater. When you store the heater, let it cool down first and, keep it dry. Then cover it with a plastic bag, put it in the packing box and store it in a dry, ventilated place. + Figure 1: ST-602-WS-E Thermostat Thermostat + Power Light Figure 2: ST-603-WS-E Power Light O Caution Light Function Selector 2000 Caution Light Function Selector

6 WARNING Plug Replacement RISK OF ELECTRIC SHOCK! DISCONNECT FROM POWER BEFORE MAINTENANCE. NOTE: This section only applies to heaters sold or used in Great Britain. This appliance is supplied with a BS pin replacement, it must be replaced with a fuse with the proper amp rating. (see Technical In the event the mains plug has to be removed/ replaced for any reason, please note: IMPORTANT: The wires in the mains lead are colored in accordance with the following code: Blue Neutral Brown Live Green/Yellow Earth As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows: NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE The blue wire must be connected to the terminal marked with an N or colored black. The brown wire must be connected to the terminal marked with an L or colored red. The green/ yellow wire must be connected to the earthing terminal which is marked with an E or with the earth symbol. WARNING the plug. Never connect live or neutral wires to the earth terminal of be removed take great care in disposing of the plug and severed cable, it must be destroyed to prevent engaging into a socket. Plug Replacement Wiring Diagram GREEN / YELLOW Earth BROWN Live BLUE Neutral FUSE 13 Amps Figure 3 CORD CLAMP

ST E /ST E / ST E / ST E ST E / ST E / ST E

ST E /ST E / ST E / ST E ST E / ST E / ST E ST-5-3-E /ST-5-4-E / ST-53-3-E / ST-53-4-E ST-533-40-E / ST-55-40-E / ST-59-40-E Turbo Electric Heater 800083-4 ENGLISH...-0 Read The Instruction manual: When this symbol is marked on a product, it means