International Markets. Product Catalogue. complementary items

Transcription

1 International Markets Product Catalogue complementary items

2 COMPLEMENTARY SOLAR THERMAL HEAT PUMPS MODULAR CONDENSING WATER HEATERS FLUES AND ACCESSORIES COMPLEMENTARY STANDARD-EFFICIENCY CONDENSING SMART SYSTEMS 135 SYSTEM DIAGRAMS

3 Fan coils and radiant fan coils Tivano - with DC Inverter Technology NEW Fan coils and radiant fan coils for heating / cooling, dehumidification and air filtration. High efficiency DC-Inverter Technology range. Five sizes of capacity (heating from 2,35 kw to 9,36 kw; cooling from 1,06 kw to 4,42 kw). Wall-mounted installation (vertical). Feet kit available as option for floor-standing installations. Highly silent. Tangential fan with DC-inverter Brushless motor. The fan speed is continuously modulated by the temperature controller. 150 mm depth. Wilde range of complementary accessories. White color, flat design. Fan coils for heating, cooling and dehumidification CODE DESCRIPTION HEATING CAPACITY 70 C WATER INLET (W) HEATING CAPACITY 50 C WATER INLET (W) TOTAL COOLING* CAPACITY (W) MAXIMUM AIRFLOW (m 3 /h) TIVANO x 723 x TIVANO x 923 x TIVANO x 1123 x TIVANO x 1323 x TIVANO x 1523 x * Coil inlet water temperature 7 C, coil outlet water temperature 12 C. Fan coils with front radiant panel for heating, cooling and dehumidification CODE DESCRIPTION HEATING CAPACITY 70 C WATER INLET (W) HEATING CAPACITY 50 C WATER INLET (W) TOTAL COOLING* CAPACITY (W) MAXIMUM AIRFLOW (m 3 /h) TIVANO R x 723 x TIVANO R x 923 x TIVANO R x 1123 x TIVANO R x 1323 x TIVANO R x 1523 x * Coil inlet water temperature 7 C, coil outlet water temperature 12 C. Note: For the operation of the fan coils TIVANO and TIVANO R, it is necessary to buy the interface board ALPHA TIVANO REMOTO (code ) to be used with a common three-speed control, or the control ALPHA TIVANO 20 IN (code ) to operate the fan coil on board. 136 = NEW (the green rectangle identifies a new code)

4 Fan coils and radiant fan coils Tivano - with DC Inverter Technology SMART SYSTEMS Accessories CODE DESCRIPTION * Control not included. ALPHA TIVANO REMOTO - interface board for three-speed control* ALPHA TIVANO 20 IN - control for on board installation with speed selector 2-way solenoid valve kit (for circulators at variable flow) 3-way solenoid valve kit for circulators at fixed flow) CODE DESCRIPTION way taps kit White feet kit L coupling 90 kit Fitting spacer kit CONDENSING STANDARD-EFFICIENCY Technical data DESCRIPTION TIVANO 23 / R23 TIVANO 45 / R45 TIVANO 64 / R64 TIVANO 76 / R76 TIVANO 94 / R94 Performance Total cooling capacity W Heating capacity with 50 C inlet water W Heating capacity with 70 C inlet water W Hydraulic features Water coil content 0,47 0,8 1,13 1,46 1,8 I Maximum operating pressure bar Hydraulic connections EK 3/4 EK 3/4 EK 3/4 EK 3/4 EK 3/4 Aeraulic data Airflow at Performance m 3 /h Maximum airflow m 3 /h Airflow at medium speed (AUTO mode) m 3 /h Airflow at minimum ventilation speed m 3 /h Maximum static pressure available bar Electrical data Power supply 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 V/ph/Hz Maximum power consumption 15,1 23, ,3 W Maximum current input 0,14 0,21 26,4 0,35 0,38 A Absorbed power at maximum speed 11,9 17,6 0,24 20,5 29,7 W Maximum current input at maximum speed 0,11 0,24 19,8 0,26 0,27 A Absorbed power at minimum speed , W Sound level Sound pressure at Performance 43,6 44, ,5 48,7 db (A) Sound pressure at maximum airflow 40,8 41,5 46,9 43,9 45,2 db (A) Sound pressure at medium airflow 34,4 35,3 43,4 36,2 38,9 db (A) Sound pressure at minimum airflow 25,3 26,5 35,7 27,4 28,7 db (A) Sound pressure at temperature setpoint 19,8 20,5 26,6 23,8 24,7 db (A) Dimensions Width mm Height mm Depth mm Weight Net weight kg UOM WATER HEATERS FLUES AND ACCESSORIES COMPLEMENTARY MODULAR CONDENSING HEAT PUMPS SOLAR THERMAL 137 SYSTEM DIAGRAMS

5 Hydraulic separators - with vertical separator and direct zones CONNECT LE Can be matched with all Beretta condensing and standard-efficiency wall-hung and floor-standing boilers. Low Energy auto-modulating pumps (EEI 0,20). Limit thermostat for low temperature installations supplied as standard. Specifically designed only for in-box installations (INDOOR and OUTOOR). IPX4D electrical protection. Possibility to connect the zones thermostats. Connect LE - Low Energy with direct zones CODE MODEL ZONES CONNECT LOW ENERGY 1D LE (*) 1 direct zone (high head) see BOX CONNECT LOW ENERGY 2D LE (*) 2 direct zones see BOX CONNECT LOW ENERGY 3D LE (*) 3 direct zones see BOX (*) For the installation it is neccessary to purchase the BOX (code ) Box for Connect CODE description BOX for CONNECT 720 x 400 x

6 Hydraulic separators - with vertical separator and direct zones CONNECT LE SMART SYSTEMS Accessories CODE description Insulation kit CONNECT LE (*) OTBus interface board for EXCLUSIVE GREEN e and EXCLUSIVE BOILER GREEN he (*) To be installed before introducing the CONNECT into the BOX. CONDENSING STANDARD-EFFICIENCY FLUES AND ACCESSORIES COMPLEMENTARY MODULAR CONDENSING HEAT PUMPS SOLAR THERMAL WATER HEATERS Connect LE with direct zones Circulator head (m) PP3 PP2 Residual head available to the system for CONNECT 1D LE PP1 PP1 PP2 PP3 CP1 CP2 CP3 CP2 CP1 CP3 Flow rate (m 3 /h) CC2 CC1 LOW proportional head curve AVERAGE proportional head curve HIGH proportional head curve LOW constant head curve AVERAGE constant head curve HIGH constant head curve CC3 CC4 Circulator head (m) CC4 CC3 CC2 CC1 PP2 Residual head available to the system for CONNECT 3D LE / CONNECT 2D LE CC1 CC2 CC3 CC4 PP1 PP3 CP1 CP2 CP3 Flow rate (m 3 /h) Curve 1 = 4 metres Curve 2 = 5 metres Curve 3 = 6 metres Curve 4 MAX = 7 metres 139 SYSTEM DIAGRAMS

7 Hydraulic separators - with vertical separator and motorized mixed zones CONNECT LE Can be matched with all Beretta condensing and standard-efficiency wall-hung and floor-standing boilers. Low Energy auto-modulating pumps (EEI 0,20). 3-ways motorized mixing valve. Independent climatic bends setting for each zone. Electronic management board supplied as standard. Limit thermostat for low temperature installations supplied as standard. Specifically designed only for in-box installations (INDOOR and OUTOOR). IPX4D electrical protection. Possibility to connect the zones thermostats. Connect LE - Low Energy with motorized mixed zones CODE MODEL ZONES CONNECT LOW ENERGY AT/BT LE (*) 1AT+1BT see BOX CONNECT LOW ENERGY AT/2BT LE (*) 1AT+2BT see BOX (*) For the installation it is neccessary to purchase the BOX (code ) Box for Connect CODE description BOX for CONNECT 720 x 400 x

8 Hydraulic separators - with vertical separator and motorized mixed zones CONNECT LE SMART SYSTEMS Accessories CODE description CONDENSING Insulation kit CONNECT LE (*) OTBus interface board for EXCLUSIVE GREEN e and EXCLUSIVE BOILER GREEN he (*) To be installed before introducing the CONNECT into the BOX. SOLAR THERMAL WATER HEATERS STANDARD-EFFICIENCY Connect LE with mixed zones Residual head available at HIGH TEMPERATURE system Residual head available at LOW TEMPERATURE system FLUES AND ACCESSORIES Circulator head (m) CC4 CC3 CC2 CC1 PP2 PP1 PP2 PP3 CP1 CP2 CP3 PP1 PP3 CP1 COMPLEMENTARY MODULAR CONDENSING HEAT PUMPS CP2 CP3 Flow rate (m 3 /h) LOW proportional head curve AVERAGE proportional head curve HIGH proportional head curve LOW constant head curve AVERAGE constant head curve HIGH constant head curve Circulator head (m) CC4 CC3 CC2 PP3 PP2 CP3 CP2 PP1 CC1 CC1 CC2 CC3 CC4 CP1 Flow rate (m 3 /h) Curve 1 = 4 metres Curve 2 = 5 metres Curve 3 = 6 metres Curve 4 MAX = 7 metres 141 SYSTEM DIAGRAMS

9 Hydraulic separators - with vertical separator and thermostatic mixed zones CONNECT BASE LE Can be matched with all Beretta condensing and standard-efficiency wall-hung and floor-standing boilers. Thermostatic mixing valve on BT zones. Low Energy auto-modulating pumps (EEI 0,20). Limit thermostat for low temperature installations supplied as standard. Specifically designed only for in-box installations (INDOOR and OUTOOR). IPX4D electrical protection. Connect BASE LE - Low Energy with thermostatic BT zones CODE MODEL CONNECT BASE LE MIX1 1AT+1BT (thermostatic) (*) see BOX CONNECT BASE LE MIX2 1AT+2BT (thermostatic) (*) see BOX (*) For the installation it is neccessary to purchase the BOX (code ) Box for Connect CODE description BOX for CONNECT (for installation) 720 x 400 x

10 Hydraulic separators - with vertical separator and thermostatic mixed zones CONNECT BASE LE SMART SYSTEMS Accessories CODE description Insulation kit for CONNECT LE (*) (*) To be installed before introducing the CONNECT into the BOX. SOLAR THERMAL CONDENSING WATER HEATERS STANDARD-EFFICIENCY Connect Base LE - Low Energy Residual head available at HIGH TEMPERATURE system Residual head available at LOW TEMPERATURE system FLUES AND ACCESSORIES Circulator head (m) CC4 CC3 CC2 CC1 PP2 PP1 PP3 CP1 CP2 CP ,5 1 1,5 2 2,5 3 Flow rate (m 3 /h) PP1 LOW proportional head curve PP2 AVERAGE proportional head curve PP3 HIGH proportional head curve CP1 LOW constant head curve CP2 AVERAGE constant head curve CP3 HIGH constant head curve Circulator head (m) CC4 CC3 COMPLEMENTARY CC2 MODULAR CONDENSING HEAT PUMPS PP3 CP3 PP2 CP2 0,2 0,4 0,6 0,8 1 1,2 1,4 1,6 1,8 Flow rate (m 3 /h) CC1 CC2 CC3 CC4 CP1 CC1 PP1 Curve 1 = 4 metres Curve 2 = 5 metres Curve 3 = 6 metres Curve 4 MAX = 7 metres 143 SYSTEM DIAGRAMS

11 Hydraulic separators - with horizontal separator CONNECT AT/BT LE To be matched only with Beretta condensing boilers Exclusive Green e and Exclusive Boiler Green he. 3-ways motorized mixing valve. Low Energy auto-modulating pumps (EEI 0,20). Independent climatic bends setting for each zone. Electronic management board supplied as standard. Limit thermostat for low temperature installations supplied as standard. Specifically designed only for in-box installations (INDOOR and OUTOOR). IPX4D electrical protection. Box supplied as standard. Connect LE - Low energy CODE MODEL CONNECT AT/BT LE (BT with motorized mixing valve) 616 x 440 x

12 DHW tanks for wall-hung boilers IDRA BV SMART SYSTEMS Enamelled DHW tank, ideal to be matched with Beretta wall-hung boilers R.A.I./R.S.I. ( only heating models). Supplied with high thermal-exchange coil. Wide range to meet all DHW needs. Magnesium anode supplied as standard. Double magnesium anode supplied as standard on BV 1000 model. CONDENSING STANDARD-EFFICIENCY WATER HEATERS Single coil DHW tank CODE MODEL H x Ø DHW TANK CAPACITY (litres) HEAT LOSS (W) ENERGY CLASS FLUES AND ACCESSORIES IDRA BV x IDRA BV x IDRA BV x IDRA BV x IDRA BV x IDRA BV x (enamelled) 304 (enamelled) 444 (enamelled) 556 (enamelled) 735 (enamelled) 890 (enamelled) ,5-142,5 - COMPLEMENTARY MODULAR CONDENSING Accessories HEAT PUMPS CODE description Socket probe for DHW tank ¾ Mixing valve Mixing valve (with ¾ adapter) SOLAR THERMAL DHW expansion vessel 18 litres DHW expansion vessel 24 litres DHW expansion vessel 35 litres 145 SYSTEM DIAGRAMS

13 DHW tanks for wall-hung boilers BV 120 Enamelled DHW tank, ideal to be matched with Beretta wall-hung boilers R.A.I./R.S.I. ( only heating models). Supplied with high thermal-exchange coil. Magnesium anode supplied as standard. DHW safety-valve supplied as standard. DHW expansion vessel available as optional. DHW connections and filling tap kit available as optional. Control board with thermostat available as optional. Single coil DHW tank CODE MODEL H X Ø DHW TANK CAPACITY (litres) HEAT LOSS (W) ENERGY CLASS BV x BV x (enamelled) 150 (enamelled) Specific accessories CODE description * Socket probe for DHW tank * DHW expansion vessel 4 litres * DHW connections and filling tap kit Control board kit with thermostat Vertical hydraulic connection Remote hydraulic connection * Beretta recommended accessories with BV tanks. 146

14 DHW tanks for wall-hung boilers IDRA M 60 SMART SYSTEMS Stailess-steel DHW tank, capacity 60 litres, ideal to be matched with the wall-hung boilers R.S.I and R.A.I. ( only heating models). Designed for wall-hung installation. Supplied with high thermal transfer coil. Magnesium anode supplied as standard. Tank probe supplied as standard. CONDENSING SOLAR THERMAL COMPLEMENTARY STANDARD-EFFICIENCY WATER HEATERS DHW tanks According to the European Directive ErP, the following product are not allowed to be placed on the European market by manufacturer since 01/08/2015 CODE MODEL DHW TANK CAPACITY (litres) ENERGY CLASS FLUES AND ACCESSORIES IDRA M x 450 x (stainless steel) G Specific accessories CODE description DHW expansion vessel kit MODULAR CONDENSING DHW recirculation kit HEAT PUMPS Solar diverter mixing valve (including flexible stainless steel connection pipes) 147 SYSTEM DIAGRAMS

15 Hydraulic devices SOLAR DIVERTER MIXING VALVE Can be used with instantaneous combi boilers. Suitable for DHW pre-heated by solar collectors. Selectable temperature (from 30 C to 56 C). Fixing brackets and gaskets supplied as standard. Hydraulic accessories CODE description Solar diverter mixing valve kit (including flexible stainless steel connection pipes) Solar diverter mixing valve 148

16 Hydraulic devices SOLAR DIVERTER MIXING VALVE SMART SYSTEMS The following diagram shows the application of Beretta solar diverter valve in a natural circolation system. Natural circulation solar system with integration combi boiler CONDENSING key: 1 - natural circulation system 2 - condensing combi boiler 3 - DHW solar diverter mixing valve STANDARD-EFFICIENCY 1 2 SOLAR THERMAL COMPLEMENTARY WATER HEATERS FLUES AND ACCESSORIES MODULAR CONDENSING HEAT PUMPS DCW DHW 3 this system diagram has only an indication purpose 149 SYSTEM DIAGRAMS

17 Devices for the systems management CONTROL SYSTEM V3 Management of cascade, system and solar thermal. Management of cascades up to 8 boilers. Management of 2 zones. Management of solar thermal. Can be installed in the plant room. Remote control function. Operation mode display. Can be matched with external temperature probe for the activation of climatic thermoregulation. Management of systems without heat pump CODE DESCRIPTION Control System V3 for cascade and solar thermal (MERLIN V3) Accessories CODE description Advanced programmable room thermostat Room thermostat Control box for management of 2 additional zones Interface board kit for 1 boiler External probe kit Zones/tank probe kit Solar probe kit 150

18 Devices for the systems management CONTROL SYSTEM V4 SMART SYSTEMS Management of cascade, system, solar thermal and heat pump. Management of cascades up to 8 boilers. Management of 2 zones. Management of solar thermal. Management of 4 heat pumps in cascade configuration. Can be installed in the plant room. Integrated and detachable room thermostat. Operation mode display. Can be matched with external temperature probe for the activation of climatic thermoregulation. CONDENSING STANDARD-EFFICIENCY Management of systems with heat pump CODE DESCRIPTION WATER HEATERS Control System V4 for cascade, solar thermal and heat pump (MERLIN V4) FLUES AND ACCESSORIES Accessories CODE description Advanced programmable room thermostat Room thermostat Control box for management of 2 additional zones COMPLEMENTARY MODULAR CONDENSING Interface board kit for 1 boiler HEAT PUMPS External probe kit Zones/tank probe kit Solar probe kit SOLAR THERMAL 151 SYSTEM DIAGRAMS

19 Programmable digital room thermostat Alpha 7D/Alpha 7D Wireless 7-day programmable room thermostat (in 60-minutes steps). Built-in heating programme. 3 C 35 C selectable temperature range with 0,2 C increments. 4 modes of operation: auto, advance, off, party. 3-temperature selections comfort, economy, frost. Display boiler ON. Selectable ON/OFF hysteresis. Low battery indicator. Summer function for cooling mode (separator relay needed). Included in the package: 1,5V batteries (type AAA), screws and wall plugs, double side adhesive. Additional features on Alpha 7D Wireless Wireless for a flexible installation (pre-cabled). 40-metre range. Receiver can be mounted to wall (screws and plugs included) or mounted to the side of the boiler (magnetic strips included). 7-day programmable room thermostat CODE MODEL TYPE CLASS ErP CONTRIBUTION ALPHA 7D 7-day digital room-thermostat I - 1% ALPHA 7D WIRELESS 7-day digital room-thermostat wireless I - 1%

20 Digital room thermostat Alpha DGT/Alpha DGT Wireless SMART SYSTEMS Digital room thermostat. 5 C 35 C selectable temperature range with 0,2 C increments. Easy to read digital display. Tactile and easy to rotate selector dial. Simple installation. Selectable ON/OFF hysteresis. Included in the package: 1,5V batteries (type AAA), screws and wall plugs, double side adhesive. Additional features on Alpha DGT Wireless Wireless for a flexible installation (pre-cabled). 40-metre range. Receiver can be mounted to wall (screws and plugs included) or mounted to the side of the boiler (magnetic strips included). CONDENSING STANDARD-EFFICIENCY WATER HEATERS Digital room thermostat CODE MODEL TYPE CLASS ErP CONTRIBUTION ALPHA DGT Digital room-thermostat I - 1% ALPHA DGT WIRELESS Digital room-thermostat wireless I - 1% FLUES AND ACCESSORIES COMPLEMENTARY SOLAR THERMAL HEAT PUMPS MODULAR CONDENSING 153 SYSTEM DIAGRAMS

21 01/2017 EN-INT Rev. 0 SCAN AND DISCOVER Trading Address: Via Risorgimento, 23/A LECCO (LC) Italy Tel Fax info@berettaboilers.com In order to improve its products, Beretta reserves the right to modify the characteristics and information contained in this catalogue at any time and without prior notice. This catalogue, therefore, cannot be considered as contractually binding on third parties.