SCREW COMPRESSORS - ELECTRIC

Transcription

1 SERIES RS - ROTOR SCREW The Pneutech Rotor Screw unit is directly coupled to the electric motor, which gives an efficient 100% power transfer for optimum performances and low running costs. With fewer transmission parts, maintenance costs are also reduced. The large air end rotates at a slow 2900rpm which ensures longevity and extra quiet operation. This makes these units ideally suited for factory units and other areas where noise is critical. Unlike other screw compressors, Rotor Screws have the unique ability to run intermittently on a stop/start cycle, or continuously on a 100% duty cycle. Series RS Features Include: Pneutech Rotor Screw Compressors Offer: High Quality Long Life Low Cost

2 SERIES RS PNEUTECH Series RS Screw Compressors embody thirty years of manufacturing experience in the field of compressed air. The PNEUTECH Series RS range consists of single and three phase direct drive electric screw compressors from 2.2 kw to 37 kw supplied as either base mounted or tank mounted units, with or without refrigerated dryers. PNEUTECH RS screw compressors are modern innovative products combining quality, reliability and special attention to user needs. Features of the PNEUTECH RS range are:- Large, direct driven, slow running screw units Compact modular designs. Better efficiency and performance. Cheaper operation from lower energy consumption. Minimum maintenance requirements. High cost effectiveness. Manufactured in Italy. Other PNEUTECH electric compressor models are available in sizes up to 300kW. RS KW (3.0HP) SILENCING CANOPY AND MOUNTED ON BASE PLATE 300L/min 10.5cfm MAX. PRESS 9bar 130psi 2.2kW 3.0HP 240Volt 1ph 11.8 Amps SOUND LEVEL 62dB(A) 850 x 450 x 510mm 45kg : DOL starting Pressure switch stop / start control.

3 RS0300-T 2.2KW (3.0HP) SCREW CANOPY AND MOUNTED ON HORIZONTAL AIR RECEIVER 300L/min 10.5cfm MAX. PRESS 9bar 130psi 2.2kW 3.0HP 240Volt 1ph 11.8 Amps SOUND LEVEL 62dB(A) DRYER: - AIR RECEIVER 150 Litres 940 x 550 x 1280mm 80kg Same features as base mounted model RSO300 but mounted on 150lt air receiver. Equipped with flexible receiver delivery line and non-return valve. RS KW (4.0HP) SCREW CANOPY AND MOUNTED ON BASE PLATE 400L/min 14.0cfm 3kW 4.0HP : 415Volt 3ph 6.3 Amps SOUND LEVEL 62dB(A) 850 x 450 x 510mm 46kg DOL starting Pressure switch stop / start control.

4 RS0400-T 3.0KW (4.0HP) SCREW CANOPY AND MOUNTED ON HORIZONTAL AIR RECEIVER 400L/min 14.0cfm 3.0Kw 4.0HP 415Volt 3ph 6.3 Amps SOUND LEVEL 62dB(A) AIR RECEIVER 150lt 940 x 550 x 1280mm 82kg Same features as base mounted model RSO400 but mounted on 150 litre air receiver. Fitted with flexible receiver delivery line and non-return valve. RS KW (5.5HP) SCREW CANOPY AND MOUNTED ON BASE PLATE 550L/min 19.2cfm 4.0kW 5.5HP 415Volt 3ph 8.0 Amps 940 x 550 x 850mm 150kg Electronic controller On/Off operation.

5 RS0550-T 4.0KW (5.5HP) SCREW CANOPY AND MOUNTED ON HORIZONTAL AIR RECEIVER 550L/min 19.2cfm 4.0kW 5.5HP 415Volt 3ph 8.0 Amps AIR RECEIVER 270 Litres 1600 x 550 x 1450mm 200kg Same features as base mounted model RS0550 but mounted on 270 litre air receiver. Fitted with flexible receiver delivery line and non-return valve. RS0550-TR 4.0KW (5.5HP) SILENCING CANOPY AND MOUNTED WITH REFRIGERATED AIR DRYER ON HORIZONTAL AIR RECEIVER 550L/min 19.2cfm 4.0 kw 5.5HP 415Volt 3ph 8.0 Amps DRYER 833Lt/min AIR RECEIVER: 270 Litres AIR OUTLET: ½ BSP ½ BSP 1600 x 550 x 1450mm 242kg Same features as base mounted model RS0550 but mounted with Air Dryer on 270 litre air receiver. Fitted with flexible receiver delivery line, non-return valve and dryer by-pass valve.

6 RS KW (7.5HP) SCREW CANOPY AND MOUNTED ON BASE PLATE 750lt/min 26.2cfm 5.5kW 7.5HP 415Volt 3ph 10.8 Amps 940 x 550 x 850mm 152kg Electronic controller On/off operation. RS0750-TR 5.5KW (7.5HP) SILENCING CANOPY AND MOUNTED WITH REFRIGERATED AIR DRYER ON HORIZONTAL AIR RECEIVER 750L/min 26.2cfm 5.5kW 7.5HP 415Volt 3ph 10.8 Amps DRYER 950Lt/min AIR RECEIVER 270 Litres 1600 x 550 x 1450mm 244kg Same features as base mounted model RS0750 but mounted with Air Dryer on 270 litre air receiver. Fitted with flexible receiver delivery line, non return valve and dryer by-pass valve. NOTE: This model also available without Air Dryer order RS0750-T

7 RS KW (10.0HP) SCREW CANOPY AND MOUNTED ON BASE PLATE 1000L/min 35cfm 7.5kW 10.0HP 415Volt 3ph 14.8 Amps 940 x 550 x 850mm 154kg : Electronic controller On/off operation. RS1000-TR 7.5KW (10.0HP) SILENCING CANOPY AND MOUNTED WITH REFRIGERATED AIR DRYER ON HORIZONTAL AIR RECEIVER 1000L/min 35cfm 7.5kW 10.0HP 415Volt 3ph 14.8 Amps DRYER 1200Lt/min AIR RECEIVER 270 LItres 1600 x 550 x 1450mm 204kg Same features as base mounted model RS1000 but mounted with Air Dryer on 270 litre air receiver. Fitted with flexible receiver delivery line, non-return valve and dryer by-pass valve. NOTE: This model also available without Air Dryer order RS1000-T

8 RS KW (15.0HP) SCREW CANOPY AND MOUNTED ON BASE PLATE 1500L/min 54cfm 11.0kw 15.0HP 415Volt 3ph 20.8 Amps AIR OUTLET ¾ BSP 900 x 680 x 1080mm 180kg : Electronic controller On/off operation. RS1500-TR 11.0KW (15HP) SILENCING CANOPY AND MOUNTED WITH REFRIGERATED AIR DRYER ON HORIZONTAL AIR RECEIVER 1500L/min 54cfm 11.0kW 15.0HP 415Volt 3ph 20.8 Amps DRYER 1800Lt/min AIR RECEIVER 270 Litres AIR OUTLET ¾ BSP 1600 x 550 x 1450mm 270kg Same features as base mounted model RS1500 but mounted with Air Dryer on 270 litre air receiver. Fitted with flexible receiver delivery line, non return valve and dryer by-pass valve. NOTE: This model also available without Air Dryer order RS1500-T

9 RS KW (20.0HP) SCREW CANOPY AND MOUNTED ON BASE PLATE 1850L/min 66cfm 15.0kW 20.0HP 415Volt 3ph 29.0 Amps AIR OUTLET ¾ BSP 900 x 680 x 1080mm 190kg Electronic controller On/off operation. RS2000-TR 15.0KW (20.0HP) SILENCING CANOPY AND MOUNTED WITH REFRIGERATED AIR DRYER ON HORIZONTAL AIR RECEIVER MAX. PRESS SOUND LEVEL DRYER AIR RECEIVER AIR OUTLET 1850L/min 66cfm 10bar 143psi 15.0kW 20.0HP 415Volt 3ph 29.0 Amps 70dB(A) 2500Lt/min 270 Litres ¾ BSP 1600 x 550 x 1450mm 280kg Same features as base mounted model RS2000 but mounted with Air Dryer on 270 litre air receiver. Fitted with flexible receiver delivery line, non-return valve and dryer by-pass valve. NOTE: This model also available without Air Dryer order RS2000-T

10 RS KW (30.0HP) SILENCING CABINET AND MOUNTED ON A BASE FRAME 3000L/min 107cfm 22.0kW 30.0HP 415Volt 3ph 41.7 Amps SOUND LEVEL 67dB(A) AIR OUTLET 1 BSP 1150 x 890 x 1270mm 220kg Load / unload operation with timed shutdown Electronic controller. NOTE: Inverter driven version also available order RS3000-I RS3000-TR 22.0KW (30.0HP) SILENCING CABINET AND MOUNTED WITH REFRIGERATED AIR DRYER ON HORIZONTAL AIR RECEIVER 3000L/min 107cfm 22.0kW 30.0HP 415Volt 3ph 41.7 Amps SOUND LEVEL 67dB(A) DRYER 3200lt/min AIR RECEIVER 500 Litres AIR OUTLET 1 BSP 1960 x 860 x 1980mm 310kg Same features as base mounted model RS3000 but mounted with Air Dryer on 500 Litre Air Receiver. Fitted with receiver delivery line, non return valve and dryer by-pass valve. NOTE: Inverter driven version also available order RS3000-TRI

11 RS KW (40.0HP) SCREW CABINET AND MOUNTED ON A BASE FRAME 4000L/Min 151cfm 30Kw 40.0HP 415V 3ph 54Amps AIR OUTLET: 1½ BSP 1750 x 950 x 1650mm 602kg Spin-on air / oil separator Fan forced air / oil cooling Load / unload operation with timed shutdown Electronic controller NOTE: Inverter driven version also available order RS4000-I RS KW (50.0HP) SCREW CABINET AND MOUNTED ON A BASE FRAME 5200L/min 187cfm 37.0kW 50.0HP 415Volt 3ph 65Amps AIR OUTLET: 1½ BSP 1750 x 950 x 1650mm 650kg Load / unload operation with timed shutdown Electronic controller. NOTE: Inverter driven version also available order RS5000-I

12 SERIES HD PNEUTECH SERIES HD rotary screw compressors are designed for the most demanding industrial applications. Featuring quality components such as German made air ends, Regal Beloit electric motors, Air-Con air valves and Mann oil filters these compressors compare favourably with the world leaders in terms of performance, service life and economy. With well dimensioned silenced steel enclosures, quick release panels for fast access and generously sized filtration units PNEUTECH SERIES HD is also attractive to both business owners and plant maintenance managers alike. Designed to deliver continuous operation in Australian climatic conditions PNEUTECH SERIES HD is ideally suited to heavy duty production situations Australia wide. SERIES HD Features:

13 SERIES HD HD030 HD050 HD060 HD075 / HD100 MODEL MOTOR PRESSURE F.A.D. DIMENSIONS SOUND OUTLET NUMBER kw HP BAR PSI L/MIN CFM W x D x H KG db(a) BSP HD x 850 x 1160mm HD x 1000 x 1360mm ½ HD x 1000 x 1360mm ½ HD x 1360 x 1755mm HD x 1360 x 1755mm