CLEANING MACHINES ECOLINE. degreasing without water* aqueous cleaning machines. *machines for degreasing in solvents

Transcription

1 CLEANING MACHINES ECOLINE degreasing without water* 2015 aqueous cleaning machines *machines for degreasing in solvents

2 ECOLINE COMPANY Company Ecoline was founded in Equipment manufactured by the company meets the latest economic and environmental standards. To meet contemporary needs of part cleaning and coating, Ecoline Company offers Waste-free, ecofriendly machines for degreasing in non-flammable solvents as well as Multifunctional machines for surface preparation in aqueous solutions (degreasing, etching, phosphating, immunization, etc.) Only reliable components and materials are used in equipment manufacture.

3 More than 200 industrial enterprises are our customers in different regions of Russia as well as in the cities of Ukraine, Belorussia and Kazakhstan:

4 Processing in water solutions Multifunction machines for product surface preparation with aqueous solutions Company "ECOLINE" offers a range of surface preparation machines with one to five tanks, which can be used in various production schemes for processing various types. Moreover, all machines meet the requirements of surface preparation technology using water: complete tank and related piping isolation. Surface preparation machines running on aqueous solutions perform the following functions: Preparation, storage and display of treatment solutions; Mechanical particles filtration and oil separation; Blasting, immersion treatment, hydrodynamic, mechanical and other impact on the part surface for maximum efficiency. Loading / unloading and part technological transport functions. Machines can have one to five tanks which allows to perform various types of processing. The number of tanks corresponds to the number of processing phases. Operational cycle can have the following surface preparation phases: degreasing; etching; phosphating; immunization; washing with water; drying. The main types of machines running on water Compact spray jet dead-end type machines In these machines washable parts remain stationary while cleaning and other processing solutions are subsequently fed to the processing zone. These types of machines include outfits of "MPP" series. Submersible lines of surface preparation A range of tanks filled with processing solutions and equipped with a transport system. These types of machines include "PM" series. Spray jet belt-type machines Washable parts are moved along the conveyor and consistent processed with washing and other processing media in the relevant zones.

5 Processing in water solutions WASHING MACHINES FOR THE WORKSHOP Automatic washing machine of "SM" series are intended for washing parts with dimensions up to Ш 800 mm, using aqueous detergent composition. Working chamber has a mesh basket made of stainless steel for part loading. During the process, the basket is rotated with the energy of a liquid jet (jet drive). Electric drive is installed upon request. The machine is conventionally equipped with flat jet nozzles produces by the company «Spraying systems». Due to the nozzles located above, sidewards and below the washable parts as well as basket rotation the washing is effective in the entire volume of the process chamber. Technical specifications Units SM-38 SM-80 Max. load kg Basket diameter ММ Max. item height ММ Collecting tanks Tank volume l Heating (option) kwt 2 4 Spray system Pressure at the nozzle outlet bars 2,1 2,3 Pump power kwt 0,55 1,1 Pump delivery L/m Unit dimensions Depth ММ Widght ММ Height ММ Current supply parameters Voltage, 50 Hz V 220/380 V 220/380 V

6 Processing in water solutions Basic configuration of the equipment: Timer 0-60 min. Rotating basket drive: reactive Load basket made of stainless steel Tanks, end fitting, and isolation valves made of stainless steel Lower jet collector Upper jet collector (L-shaped) Coarse filter on the sink outlet of the working chamber Minimum water level gauge Additional options: Heating up to 70 C Basket electric drive Control of operating water level Disk oil separator External thermoinsulation Drainage pump Part blowing with compressed air Vapor recovery fan Operating hour counter Overflow alarm Viewing window

7 Processing in water solutions COMPACT INDUSTRIAL DEAD- END TYPE SPRAY JET MACHINES of MPP-250 MPP-350 TYPE Operating chamber has a retractable platform which allows for loading of products from outside. The automated control system allows to modify the processing parameters depending on product type. The machines can be equipped with the required number of tanks for carrying out the relevant manufacturing operations. Processing fluid handles part surface in three directions at once: High-pressure blasting provides mechanical impact. Liquid atomized to a fine state wets the part surface almost on the entire volume. The process continuity provides a constant update of the solution (or washing water) on the part surfaces. Higher solution temperatures, up to 90 C, promote intensification of processing. The machine conventional versions are equipped with upper and lower (П - shaped) Rotating collectors with nozzles by Spraying Systems Technical specifications Units МPP-250 МPP-350 Max. load kg Loaded container dimensions (platform diameter) ММ Container height ММ Collecting tanks Number of tanks Pcs Tank value l Heating kwt 5 10 Spray system Pressure at the nozzle outlet bar 2,5 2,5 Unit dimensions (item with one tank) Depth ММ Width ММ Height ММ

8 Processing in water solutions COMPACT INDUSTRIAL DEAD-END TYPE SPRAY JET MACHINES of MPP-500 MPP-1000 TYPE Operating chamber has a retractable platform which allows for loading of products from outside. The automated control system allows to modify the processing parameters depending on product type. The machines can be equipped with the required number of tanks for carrying out the relevant manufacturing operations. High-pressure blasting provides mechanical impact. Liquid atomized to a fine state wets the part surface almost on the entire volume. The process continuity provides a constant update of the solution (or washing water) on the part surfaces. Higher solution temperatures, up to 90 C, promote intensification of processing. The machine conventional versions are equipped with upper and lower (П - shaped) Rotating collectors with nozzles by Spraying Systems. Technical specifications Units МPP-500 МPP-1000 Max. load kg Loaded container dimensions (platform diameter) ММ Container height ММ Collect ing tanks Number of tanks pcs/ Tank value l Heating kwt Spray system Pressure at the nozzle outlet bar 4,5 4,5 Unit dimensions (item with one tank) Depth ММ Width ММ Height ММ

9 Processing in water solutions IMMERSION SPRAY JET MACHINES WITH ROTATING (TILTING) BASKET Washing machines are designed for immersion and spray washing of parts in the Basket. Washing (processing) camera has a sliding door with the electric drive. The machine can be equipped with a loading table with roller conveyor. Upon request, the machine may have 1 to 5 storage tanks for various processing operations (degreasing, phosphating, etching, immunization, water rinsing). For each processing step an operator may assign the following automatic processing modes: Blasting; Blasting with immersion in the washing medium; Basket rotation with immersion of the parts into the washing medium; Basket tilting (tilt angle may be adjusted) with immersion into the washing medium; Basket is in a fixed position. Washing machine MSP-50 MSP-100 MSP-150 Loading basket dimensions 500Х250Х х350х х500х500 Machine dimensions (mm) 1600X1000X x1600x x1200x2100 Height of washing chamber delivery board (мм) Weight of simultaneously washed parts (max) (kg) Number of washing cycles per hour Washing medium pressure at spray jet washing washing regime (bar), Collecting tank volume Х250 Х400 Х500 Heating (per one collecting volume) 5 КВТ 7,5 КВТ 10 КВТ

10 Processing in water solutions Advantages of washers series MSP: Maximum efficiency there are all possible types of treatment installed in the unit jet spray, immersion type, basket rotation, basket tilting, combination possibility. Processing of parts is performed in the same chamber without moving parts from step to step, automatically, without operator intervention; Easy maintenance - convenient sliding door of the washing chamber with electric drive, easily accessible mud filters (coarse filtration), bottom of the working chamber and storage tanks has a significant inclination for cleaning; High-quality materials and accessories - stainless steel AISI , automatics SIEMENS, pumps Grundfoss, nozzles Spraying Systems, ultrasound equipment Telsonic Ultrasonic; The machine must be used with peat-oil mixture of low foaming.

11 Processing in water solutions IMMERSION WASHERS WITH PNEUMATIC LIFT SERIES PM The washer is designed for immersion washing and part surface preparation. The machine is a reservoir equipped with a lift platform with pneumatic drive. Platform vertical movements during processing provide constant renewal of solutions on the part surfaces. For reloading parts the platform is lifted in the level of chamber upper square, thus making it easy to reload and transport parts. The machine is manufactured of stainless steel AISI304, 3 mm thick, and equipped with sockets for draining and connection to water supply system. The upper machine square has a hermetic cover with rubber sealing. Washers PM can be installed in a line for making subsequent steps of surface preparation. Basic equipment Made of stainless steel AISI304; Cover with a rubber seal; Air Lift; Grid platform Filling socket G0,5 Drainage nipple G1,25 Level gauge Solution heating Timer, automatic lift control Additional options Made of stainless steel AISI316 for acid solutions; Ultrasonic washing Fine filter Oil separator Roller on the lifting platform Roller for loading Roller conveyor for unloading Baskets for details Drying chamber Technical specifications Unit PM-150 PM-300 PM-500 Max. load kg Work part dimensions ММ 650х х х700 Work part height ММ Washing medium heating Unit dimensions, LxWxH ШТ. 700х900х х950х х1400х2300

12 Processing in water solutions Flow type part washing machines Spray jet flow type washer is designed to wash parts in mass production. Parts arrive into the treatment zone by conveyor. Conveyor speed is 1-6 m / min. The number of processing steps (washing, rinsing, immunization, drying) depends on the machine configuration and characteristics of applied solutions. All the mechanical components and machine parts that come into contact with water and detergent solutions are made of stainless steel. Technical specifications AP-25 AP-50 AP-150 Square dimensions, WxH, mm 250х х х250 Conveyor speed, m/min Part loading height, mm Conveyor length in the loading zone, mm Conveyor length in the unloading zone, mm Washing (rinsing section) with recirculation Collecting tank volume, l Collecting tank heating, kwt Pressure at the nozzle outlet at rinsing, bar 3,0 3,0 3,0 Pump, kwt 2,2 3,0 4,5 Section dimensions 1200х1250х х1560х х1560х2500 Water supply rinsing section with a separate drainage Collecting tank volume, l Water supply from the shop (customer s), pressure, bar/consummation, l/m 2,5/15 2,5/20 2,5/50 Section dimensions 1200х1250х х1560х х1560х2500 Drying section with air heating Air heating, kwt Air pump, kwt 2,2 4,5 5,5 Section dimensions 1200х1250х х1560х х1560х2500

13 Processing in water solutions Conveyor Made of durable stainless chain supported by rollers to withstand the load of at least 100 kg / m. The speed of conveyor is adjustable. Jet washing chamber The bottom of the working chamber and storage tanks is gradient across the plane for good solution draining and to prevent formation of deposits; Double entrance area prevents solution from getting into the adjacent chamber and work area; Special stainless steel nozzles with a flat jet by the company Spaying systems are applied; Tanks with detergent solution Each part-washing section is equipped with a storage tank; The filter basket is made of stainless mesh and is easily accessible for regular cleaning; Heaters and sensors are fixed above the liquid level for easy maintenance; Vertical no-stuffing GRUNDFOS pumps of stainless steel; Hot air drying of parts Air is forced under pressure The temperature is adjusted. Machine control system Based on the industrial controller and operator panel. Includes pump protection from dry run, power drops and failures.

14 Processing Solvents NON-WASTE MACHINES FOR DEGREASING WITH NON-INFLAMMABLE SOLVENTS Dirty parts Oil Clean parts Features: Degreasing process is performed in the sealed operating chamber; The system of solvent steams condensation prevents solvent waste at drying; The solvent works without change due to regeneration (distillation) system ; Water rinsing after degreasing not required, i.e. no expensive construction, use of disposal facilities and water preparation equipment is required; Process low cost: the solvent works in a closed cycle (i.e. without change) Degreasing quality. Perchloroethylene has a high permeating ability. Oil solvability in perchloroethylene is several times higher than in petrol. Due to these properties even closely put parts and parts of complex configuration can be well degreased. Compactness and high performance are achieved due to part washing and drying in the same chamber, i.e. no multiple reloading and part movement during the processing is needed. Versatility. ECOLINE equipment allows to degrease items made of different metals (iron and alloys, aluminum, magnum, zinc, copper, brass alloys, etc.) as well as products made of glass, polyethylene, polyurethane, PVC, etc. Fire safety. Perchloroethylene is flame- and explosion-free. Environment-friendliness. The equipment is sealed for environment and work area.

15 Processing Solvents MACHINES FOR DEGREASING SMALL AND LONG PARTS WITH FRONT LOADING. SPECIAL MT SERIES Regimes/series Filling Spray jet processing Rotation* Rinsing Part drying Solvent regeneration МТ *Additional option Designed for degreasing long parts as well as metal ware parts and accessories in a container. Machine operation tank is loaded through a sealed hatch located on its face (face loading). The working tank may be equipped with a perforated cylinder drive - rotation system. Machine loading / unloading is done manually from the loading table. Metal ware parts and accessories are pre-loaded into the containers, which are sequentially retracted into the machine operation tank. The weight of container with the details is kg. Unit type МТ-35 МТ-75 МТ-150 Operation chamber dimensions, mm Ø 300х500 or 270х270х500 мм Ø 300х1000 or 270х270х1000 мм Ø 300х2000 or 270х270х2000 мм Processing time, min Max. load, kg Productivity, kg/hour Backup tank volume, l Operating voltage, V Max. Power supply, kwt Unit dimensions, mm 850х1300х х1300х х1150х1800

16 Processing Solvents MACHINES WITH UPPER LOADING FOR DEGREASING VARIOUS PARTS. UNIVERSAL SERIES MR Regimes/series Filling Spray jet processing Rotation* Rinsing Part drying Solvent regeneration МR * Additional option Universal machine is designed for degreasing various parts, including metal ware parts and accessories in the container. Machine operating tank is rectangular in shape and is loaded through the top opening of the working tank sealed with a lid (top loading). The operating tank may be equipped with a perforated cylinder drive - rotation system. Loading / unloading of the machines is done by hand in perforated baskets or using a hoist. The weight of the container with the details in manual loading is kg. Unit type MR-150 MR-500 MR-1000 Operation chamber dimensions, mm 840х420х х700х х700х550 Processing time, min Max. load, kg Max. productivity, kg/hour Backup tank volume, l Hatch-opening drive РУЧНОЙ ПНЕВМОПРИВОД ПНЕВМОПРИВОД Operating voltage, V Max. Power supply, kwt Unit dimensions, mm 1580х1470х х2200х х2200х2300

17 Processing Solvents SPRAY JET IMMERSION MACHINES WITH ROTATING (TILTING) BASKET FOR WORK WITH SOLVENTS Solvent distillation system Automatic washing machine is designed for part immersion and spray washing in mesh baskets in the sealed operating chamber in perchloroethylene. Installation of baskets with parts in the machine washing chamber and removing them after washing cycle is done manually. The machine can be equipped with a loading table with roller conveyor. Upon request, the machine may have one or two collecting tanks providing the required purity for the parts. The solution being drained from the operating chamber flows through a coarse filter of the corresponding collecting tank. The filters are easily accessible and can be cleaned by the operator when needed. Advantages of MKS machines Part rotation / tilting system is included in the standard equipment; The machine is equipped with a clamping basket with a hold-down cover, height-adjustable and excluding collision of parts during rotation; Mechanical fine filters prevent pollution beginning with 1 micron; More convenient loading when the machine is equipped with a loading table with roller conveyor. The unit implements all possible treatments - blasting, immersion, basket rotation, basket tilting, possibility of combination. There is an innovative heat recovery system during regeneration used for the first time in the machine series MKS which reduces energy costs by 30% compared to earlier machine series and increases regenerator performance by 25%. Parameters MKS-50 MKS-100 MKS-150 Loading basket dimensions, mm 500х250х х350х х500х500 Machine dimensions*, (mm) 1600х1000х x1600x х1200х2100 Part weight in loading (max) (kg) Number of washing cycles per hour Pressure at jet washing, bar Collecting tank volumes, l Heating (per one tank) 10 kwt 10 kwt 15 kwt

18 processing solvents MACHINES FOR DEGREASING LARGE PARTS. SERIES SA Regimes/series Filling Spray jet processing Rotation* Rinsing* Part drying Solvent regeneration Universal machine designed for degreasing various parts. SA * Additional option Working chamber of a rectangular shape with a sealed loading hatch on the front surface. The camera has a sliding platform and a loading table that allows you to load or hang the products from outside. Machines for degreasing large parts and hanging parts. Series SA Unit type SA-1000 SА-3000 SА-5000 Operating chamber dimensions (LxWxD), mm Under request** Under request ** Under request ** Chamber volume, l Processing time, min Backup tank volume, l Power voltage, V Max. Power supply, kwt ** Operating chamber dimensions are defined by the customer according to the volume correspondent to unit type with the manufacturer s approval.

19 SPECIFICATIONS OF PART SURFACE POLLUTION Group Examples Physical and chemical features Pollution source Non-organic polluting substances Metals Swarf and dust of simple metals Non-soluble in water and organic solvents. Soluble in acids and more seldom in alkaloids. Machine-building products Non-metals Graphite Non-soluble in water, organic solvents, acids and alkaloids. Disintegrates only under influence of active oxidants. Graphite-containing lubricant or metal mine Metal oxides and hydroxides AI(OH)3, Fe2O3 Non-soluble or slightly soluble in water with disintegration. Soluble in the acids. Metal parts Sulphur, phosphor, silica compounds CuS, FeP, etc. Partly soluble in water with disintegration. Soluble in acids. Metal parts Salts FeCI3, Fe2(SO4), NaCI Usually soluble in water. Intensify corrosion. Etching traces Organic polluting substances Hydrocarbons Paraffin Non-soluble in water and mineral oils. Soluble in organic solvents. Lubricants, anti-corrosion agents and lubricants, etc. Inferior aliphatic acids Lactic acid, oleic (butyric) acid Accelerate corrosion, forming salts. Non-soluble in water but soluble in solvents. Human body evaporation products Fatty acids and their glycerides Oleic acid, stearin acid, oxidation products Prevent tissue adhesion. Non-soluble in water and slightly soluble in organic solvents. Soluble in alkali solutions. Traces of cleaning pastes and any oils Amorphous carbon Organic substances carbonization Very sticky substance. Soluble in water and solvents. Different pollution sources

20 Notes

21 Notes

22

23 ООО «ЭКОЛАЙН-ТЕХНО» г. Москва, Электролитный пр-д, д. 1А тел.: (495) тел./факс: (499)