Since 1960 we have produced your hot water

Size: px
Start display at page:

Download "Since 1960 we have produced your hot water"

Transcription

1 VERTICAL ELECTRIC WALL HANG WATER HEATERS ENERGY SAVING Pages 3-8 ELECTRIC WATER HEATERS Pages 9-25 WOOD WATER HEATERS Pages MULTIGAS WATER HEATERS Pages HEAT PUMP WATER HEATERS AND TREATMENT UNITS Pages BOILERS WITH DOUBLE WALLED EXCHANGER Pages BOILERS WITH WELDED COIL Pages Pages TANKS Catalogue 0/206

2 Evolution Founded in 960, Boschetti Industrie Meccaniche is a prime exponent of Italy s finest traditions of technical excellence in the heating and hot water sector. The continuous efforts of the firm in use of the most advanced technologies and in the constant search of a careful production for the environement and energy saving, allowed to Boschetti to produce a wide range of products according to the European standard. The company was founded and grew in the hardworking area of north-east Italy, thanks to the passion and resourcefulness of a family that has been able to conquer a place of honour as one of the most appreciated brands in its sector, and Boschetti is proud to offer all the values of production quality, technological brilliance and Italian style associated with its name. Design and production Advanced technical skills, experience, operative flexibility and a passion for innovation are the cornerstones of Boschetti s long and highly successful presence on the Italian and international heating and hot water market, coupled with an intense interest in the themes of sustainable energy and environmental protection. Every products processing cycle is executed inside the factory. It allows to verify the quality of the materials and components and check every steps of production. All items are tested by qualified staff. Boschetti is able to produce new models for the most different requests. Certification and approval Boschetti Industrie Meccaniche collaborates with important corporate of certification for technical advice. All products are guaranteed in compliance with applicable standards and CE certification requirements. Since 960 we have produced your hot water Made in Italy The company s versatile range of products, which includes gas, electric and wood-fired storage heaters and boilers for both domestic and industrial use, guaranteeing high performance and renowned for their robustness and reliability, is the result of an integrated philosophy developed entirely within the company, the hallmark of Made-in-Italy distinction with the indispensable objective of the maximum standards of safety and efficiency. The selection of materials, the development and the creativity of new projects and production technology, labour force and national services allows to safeguard the product quality and the wellness of the complete production chain. Boschetti for the environment Boschetti has always looked towards the future with technological innovations driven by a philosophy inspired by respect for the environment and the rational use of energy resources. It is also for this reason that a 200 kw photovoltaic system is used to power the factory and offices of the entire company, allowing vital energy to be produced from renewable sources. Page

3 Welding plant for domestic use tanks Tanks pressure test Press plant Welding plant for industrial use tanks Sandblasting plant Painting plant Functional test of products Page 2

4 VERTICAL ELECTRIC WALL HANG WATER HEATERS ENERGY SAVING BSEGOLD Vertical electric wall hang water heater energy saving BSETGOLD Vertical electric wall hang water heater energy saving - Thermo version BSETRONIC Vertical electric wall hang water heater energy saving Page 3

5 BSEGOLD VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING DESCRIPTION This electric water heater, designed to enhance its energy efficiency characteristics, is suitable in particular for domestic users, where energy savings are required. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and double insulation characteristics of this model, available in several versions (from 56 to 00 litres, also in a thermo version), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSEGOLD brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The thermo version is also pre-fitted for a temperature probe. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated Thermostat adjustment knob The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years Page 4

6 TECHNICAL DATA AND DIMENSIONS D BSEGOLD VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING h H G Cold water inlet g i Hot water outlet Heating element and thermostat unit DIMENSIONS BSEGOLD 50 BSEGOLD 80 BSEGOLD 00 D mm H mm h mm G mm g mm i mm Ø /2" /2" /2" TECHNICAL DATA BSEGOLD 50 BSEGOLD 80 BSEGOLD 00 Capacity L Storage tank Pmax bar Power W Voltage V Single drawn at 40 C () L Efficiency ΔT 45 C (2) L/h h consumption to mantain temperature kw 0,77,0,37 Weight Kg ERP BSEGOLD 50 BSEGOLD 80 BSEGOLD 00 Energy class C C C Load profile M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 5

7 TECHNICAL DATA AND DIMENSIONS D BSETGOLD VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING - THERMO VERSION h H MT RT MT RT h3 h2 3* Cold water inlet g * Sheath for temperature probe is not supplied. Lenght has to be 270 mm. i 2 G MT RT 2 Hot water outlet Thermo flow Thermo return Heating element and thermostat unit Thermic sensor connection /2" 3 Thermic sensor sheath DIMENSIONS BSETGOLD 50 BSETGOLD 80 BSETGOLD 00 D mm H mm h mm h2 mm h3 mm G mm g mm i mm Ø /2" /2" /2" MT - RT Ø 3/4 3/4" 3/4 TECHNICAL DATA BSETGOLD 50 BSETGOLD 80 BSETGOLD 00 Capacity L Storage tank Pmax bar Power W Voltage V Single drawn at 40 C () L Efficiency ΔT 45 C (2) L/h h consumption to mantain temperature kw 0,85,2,5 Exchanger surface m² 0,33 0,33 0,33 THERMO Exchanger efficiency ΔT 45 C (3) L/h EXCHANGER Weight Kg ERP BSETGOLD 50 BSETGOLD 80 BSETGOLD 00 Energy class C C C Load profile M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 6

8 BSETRONIC VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING DESCRIPTION This electric water heater, designed to enhance its energy efficiency characteristics, is suitable in particular for domestic users, where drastic energy savings are required. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and double insulation characteristics of this model, available in several versions (from 56 to 00 litres), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. BSETRONIC is equipped with IQuaFlex technology, which intuitively manages energy resources based on user preferences. Over the first two weeks of use, this thermostat records all the moments of greatest use of hot water. Subsequently, taking this consumption to be typical of the user's needs, this system automatically heats water at the moment of effective use, regulating water temperature and obtaining significant energy savings. The thermostat is also fitted with an automatic anti-legionella and antifreezing device. A digital display mounted externally allows all functions to be monitored and controlled. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSETRONIC brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated Externally adjustable thermostat with digital display. Settings: holiday, IQuaFlex smart and manual The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years Page 7

9 TECHNICAL DATA AND DIMENSIONS D BSETRONIC VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING h H 2 G g i Cold water inlet Hot water outlet Heating element and thermostat unit 2 Display DIMENSIONS BSETRONIC 50 BSETRONIC 80 BSETRONIC 00 D mm H mm h mm G mm g mm i mm Ø /2" /2" /2" TECHNICAL DATA BSETRONIC 50 BSETRONIC 80 BSETRONIC 00 Capacity L Storage tank Pmax bar Power W Voltage V Single drawn at 40 C () L Efficiency ΔT 45 C (2) L/h h consumption to mantain temperature kw 0,77,0,37 Weight Kg ERP BSETRONIC 50 BSETRONIC 80 BSETRONIC 00 Energy class B B B Load profile M M M () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 8

10 ELECTRIC WATER HEATERS BSE Vertical electric wall hang water heater BSET Vertical electric wall hang water heater - Thermo version BSER/Q Point of use wall hang water heater square over sink version BSER/SQ Point of use wall hang water heater square under sink version BSEF Vertical electric wall hang water heater BSER/R Point of use wall hang water heater round over sink version BSER/SR Point of use wall hang water heater round under sink version OBSE Horizontal electric wall hang water heater OBSET Horizontal electric wall hang water heater - Thermo version BSEBD Electric water heater stand on domestic BSEBC Storage electric water heater stand on commercial BSETBC Storage electric water heater stand on commercial - Thermo version Page 9

11 BSE VERTICAL ELECTRIC WALL HANG WATER HEATER DESCRIPTION This electric water heater, designed to give long-lasting service, is suitable for domestic users and for the needs of small businesses. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (from 56 to 200 litres, also in a thermo version), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSE brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The thermo version is also prefitted for a temperature probe. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee from 3 to 5 years according to version Page 0

12 TECHNICAL DATA AND DIMENSIONS D BSE VERTICAL ELECTRIC WALL HANG WATER HEATER h H G Cold water inlet Hot water outlet Heating element and thermostat unit i g DIMENSIONS BSE 50 BSE 80 BSE 00 BSE 20 BSE 50 BSE 200 D mm H mm h mm G mm g mm i mm Ø /2" /2" /2" /2" /2" /2" Ø /2" /2" /2" /2" 3/4" 3/4" TECHNICAL DATA BSE 50 BSE 80 BSE 00 BSE 20 BSE 50 BSE 200 Capacity L Storage tank Pmax bar Power W Voltage V Single drawn at 40 C () L Efficiency ΔT 45 C (2) L/h Weight Kg ERP BSE 50 BSE 80 BSE 00 BSE 20 BSE 50 BSE 200 Energy class D D D D Load profile M M L L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page

13 TECHNICAL DATA AND DIMENSIONS D BSET VERTICAL ELECTRIC WALL HANG WATER HEATER - THERMO VERSION h H MT MT h3 h2 RT RT Cold water inlet 3 * MT Hot water outlet Thermo flow G RT 2 Thermo return Heating element and thermostat unit Thermic sensor connection /2" 3 Thermic sensor sheath 2 i g * Sheath for temperature probe is not supplied. Lenght has to be 270 mm. DIMENSIONS BSET 50 BSET 80 BSET 00 BSET 20 BSET 50 BSET 200 D mm H mm h mm h2 mm h3 mm G mm g mm i mm Ø /2" /2" /2" /2" /2" /2" Ø /2" /2" /2" /2" 3/4 3/4" MT - RT Ø 3/4 3/4" 3/4 3/4" 3/4 3/4" TECHNICAL DATA BSET 50 BSET 80 BSET 00 BSET 20 BSET 50 BSET 200 Capacity L Storage tank Pmax bar Power W Voltage V Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Exchanger surface m² 0,33 0,33 0,33 0,33 0,87 0,87 THERMO Exchanger efficiency ΔT 45 C (3) L/h EXCHANGER Weight Kg ERP BSET 50 BSET 80 BSET 00 BSET 20 BSET 50 BSET 200 Energy class D D D D Load profile M M L L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 2

14 BSEF VERTICAL ELECTRIC WALL HANG WATER HEATER DESCRIPTION This electric water heater, is suitable for domestic users and for the needs of small businesses. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions ( litres), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect perfect application of protective resin finishes (vitreous enamel) inside the tank. BSEF brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating IP 23. Electrical operation with single-phase V Insulation consists in rigid polyurethane foam The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an anode in magnesium alloy External knob for temperature regulation Flange with 5 bolts for coupling the heating unit Guarantee 3 years Page 3

15 TECHNICAL DATA AND DIMENSIONS D h2 BSEF VERTICAL ELECTRIC WALL HANG WATER HEATER h H G Cold water inlet Hot water outlet Heating element and thermostat unit i g DIMENSIONS BSEF 50 BSEF 80 BSEF 00 D mm H mm h mm h2 mm G mm g mm i mm Ø /2" /2" /2" Ø /2" /2" /2" TECHNICAL DATA BSEF 50 BSEF 80 BSEF 00 Capacity L Storage tank Pmax bar Power W Voltage V Frequency Hz 50/60 50/60 50/60 Heating time ΔT45 C hh:mm 02:0 03:30 03:30 Protection rating IP 23 IP 23 IP 23 Weight Kg ERP BSEF 50 BSEF 80 BSEF 00 Energy class D D D Load profile M M L NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 4

16 OBSE HORIZONTAL ELECTRIC WALL HANG WATER HEATER DESCRIPTION This electric water heater, designed to give long-lasting service, is suitable for domestic users and for the needs of small businesses. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power, due above all to the position of the heating element, which allows a higher efficiency to be obtained, together with easier maintenance. The position of hot water joints also ensures great versatility in adapting the heater to any system. On the OBSE model, available in several versions (from 56 to 200 litres, also in a thermo version), the attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. OBSE brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat. The thermo version is also pre-fitted for a temperature probe. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on the right Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years Page 5

17 TECHNICAL DATA AND DIMENSIONS d2 OBSE HORIZONTAL ELECTRIC WALL HANG WATER HEATER D d = i = L = L = Cold water inlet Hot water outlet Heating element and thermostat unit DIMENSIONS OBSE 50 OBSE 80 OBSE 00 OBSE 20 OBSE 50 OBSE 200 D mm L mm L mm d mm d2 mm i mm Ø /2" /2" /2" /2" /2" /2" Ø /2" /2" /2" /2" 3/4" 3/4" TECHNICAL DATA OBSE 50 OBSE 80 OBSE 00 OBSE 20 OBSE 50 OBSE 200 Capacity L Storage tank Pmax bar Power W Voltage V Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Weight Kg ERP OBSE 50 OBSE 80 OBSE 00 OBSE 20 OBSE 50 OBSE 200 Energy class D D D D Load profile M M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 6

18 TECHNICAL DATA AND DIMENSIONS d2 MT Since 960 we have produced your hot water OBSET HORIZONTAL ELECTRIC WALL HANG WATER HEATER - THERMO VERSION D 2 3 d = i = RT L = L = MT RT 2 Cold water inlet Hot water outlet Thermo flow Thermo return Heating element and thermostat unit Thermic sensor connection "¼ 3 Thermic sensor sheath L2 * Sheath for temperature probe is not supplied. Lenght has to be 270 mm. DIMENSIONS OBSET 80 OBSET 00 OBSET 20 OBSET 50 OBSET 200 D mm L mm L mm L2 mm d mm d2 mm i mm Ø /2" /2" /2" /2" /2" Ø /2" /2" /2" 3/4 3/4" MT - RT Ø 3/4" 3/4 3/4" 3/4 3/4" TECHNICAL DATA OBSET 80 OBSET 00 OBSET 20 OBSET 50 OBSET 200 Capacity L Storage tank Pmax bar Power W Voltage V Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Exchanger surface m² 0,2 0,33 0,33 0,35 0,60 THERMO Exchanger efficiency ΔT45 C (3) L/h EXCHANGER Weight Kg ERP OBSET 80 OBSET 00 OBSET 20 OBSET 50 OBSET 200 Energy class D D D Load profile M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 7

19 BSER POINT OF USE WALL HANG WATER HEATER DESCRIPTION This type of electric water heater (available from 0 to 5 and 30 litres, in a round or square version, with joints suitable for installation above or below a sink) is suitable for the limited supplies of hot water typical of kitchens, bathrooms or showers. It is the ideal solution in situations where hot water is needed rapidly, reaching full operating temperature in a very short time (for example, just 30 minutes for a shower with an average flow). The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSER brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" According to the version, the carefully designed and constructed external housing is made in impact-resistant hotmoulded polystyrene for square models, and for round models, in sheet metal coated with white resins stove-fired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee from 3 to 5 years according to version Page 8

20 TECHNICAL DATA AND DIMENSIONS L = a = P BSER POINT OF USE WALL HANG WATER HEATER H h SQUARE OVER SINK VERSION BSER/Q i Cold water inlet i Hot water outlet Heating element and thermostat unit H SQUARE UNDER SINK VERSION BSER/SQ h = a = L P DIMENSIONS BSER/Q 0 BSER/SQ 0 L mm H mm h mm a mm P mm i mm Ø /2" /2" Ø /2" /2" TECHNICAL DATA BSER/Q 0 BSER/SQ 0 Capacity L 0 0 Storage tank Pmax bar 8 8 Power W Voltage V Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Weight Kg 6,5 6,5 ERP BSER/Q 0 BSER/SQ 0 Energy class A B Load profile XXS XXS () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 9

21 TECHNICAL DATA AND DIMENSIONS D = a = P BSER POINT OF USE WALL HANG WATER HEATER h ROUND OVER SINK VERSION BSER/R i i Cold water inlet Hot water outlet Heating element and thermostat unit 0-5 h ROUND UNDER SINK VERSION BSER/SR 30 = a = D P DIMENSIONS BSER/R 0 BSER/R 5 BSER/R 30 BSER/SR 0 BSER/SR 5 D mm h mm a mm P mm i mm Ø /2" /2" /2" /2" /2" Ø /2" /2" /2" /2" /2 TECHNICAL DATA BSER/R 0 BSER/R 5 BSER/R 30 BSER/SR 0 BSER/SR 5 Capacity L Storage tank Pmax bar Power W Voltage V Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Weight Kg 7,5 8 0,5 7,5 8 ERP BSER/R 0 BSER/R 5 BSER/R 30 BSER/SR 0 BSER/SR 5 Energy class A A B B B Load profile XXS XXS S XXS XXS () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 20

22 BSEBD ELECTRIC WATER HEATER STAND ON DOMESTIC DESCRIPTION This electric water heater, designed to give long-lasting service, is suitable in particular for domestic users. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (from 50 and 200 litres), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. BSEBD brings domestic users all the necessary comfort and safety thanks to a bipolar safety thermostat. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. Electrical operation with single-phase 220 V Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 2

23 TECHNICAL DATA AND DIMENSIONS BSEBD i D ELECTRIC WATER HEATER STAND ON DOMESTIC H h S g G S Cold water inlet Hot water outlet Water drain Heating element and thermostat unit DIMENSIONS BSEBD 50 BSEBD 200 D mm H mm h mm G mm g mm i mm Ø /2" /2" S Ø 3/4" 3/4" TECHNICAL DATA BSEBD 50 BSEBD 200 Capacity L Storage tank Pmax bar 8 8 Power W Voltage V Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Weight Kg Energy class Load profile ERP BSEBD 50 BSEBD 200 () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 22

24 BSEBC STORAGE ELECTRIC WATER HEATER STAND ON COMMERCIAL DESCRIPTION This electric water heater, designed to give long-lasting service, is suitable for prevalently commercial users. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (from 200 to 000 litres, and also in a thermo version), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective resin finishes (vitreous enamel on versions up to 500 litres, and galvanization on radiator versions and for 800-litre and 000-litre models), inside the tank. Electrical fittings consist in single-phase electrical heating elements of excellent quality and appropriate length and power, positioned to guarantee optimal operation, energy savings and the complete heating of all water in the tank. Suitably connected, these heating elements can operate with single-phase 220 V power, or with triple-phase 220 V or 380 V power, coordinated by a bipolar safety thermostat. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 2 years Page 23

25 TECHNICAL DATA AND DIMENSIONS BSEBC D BSEBC BSEBC STORAGE ELECTRIC WATER HEATER STAND ON COMMERCIAL R R H h S S i g Cold water inlet G G Hot water outlet S Water drain R Recirculation Heating element and thermostat unit Safety valve H2O is not included for the models BSEBC DIMENSIONS BSEBC 200 BSEBC 300 BSEBC 400 BSEBC 500 BSEBC 800 BSEBC 000 D mm H mm h mm G mm g mm i mm S Ø 2 2 R Ø 3/4" 3/4" 3/4" 3/4" ¼ ¼ Ø 3/4" 3/4" " " 2" 2" Ø 3/4" 3/4" " " 2" 2" TECHNICAL DATA BSEBC 200 BSEBC 300 BSEBC 400 BSEBC 500 BSEBC 800 BSEBC 000 Capacity L Storage tank Pmax bar Power W 3 x x x x x x 500 Voltage V / / / / / /380 Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Weight Kg Energy class Load profile ERP BSEBC 200 BSEBC 300 BSEBC 400 BSEBC 500 BSEBC 800 BSEBC 000 D XL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 24

26 TECHNICAL DATA AND DIMENSIONS D BSETBC BSETBC BSETBC STORAGE ELECTRIC WATER HEATER STAND ON COMMERCIAL - THERMO VERSION R R H h h3 MT h3 MT RT S h2 S h2 RT i Cold water inlet Hot water outlet g MT Thermo flow G G RT Thermo return S R Water drain Recirculation Heating element and thermostat unit Safety valve H2O is not included for the models BSEBC DIMENSIONS BSETBC 200 BSETBC 300 BSETBC 400 BSETBC 500 BSETBC 800 BSETBC 000 D mm H mm h mm h2 mm h3 mm G mm g mm i mm S Ø 2 2 R Ø 3/4" 3/4" 3/4" 3/4" ¼ ¼ - Ø 3/4" 3/4" " " 2" 2" MT - RT Ø " " " " " " TECHNICAL DATA BSETBC 200 BSETBC 300 BSETBC 400 BSETBC 500 BSETBC 800 BSETBC 000 Capacity L Storage tank Pmax bar Power W 3 x x x x x x 500 Voltage V / / / / / /380 Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Exchanger surface m² 0,5,2,2,7,7 THERMO Exchanger efficiency ΔT 45 C (3) L/h EXCHANGER Weight Kg Energy class Load profile ERP BSETBC 200 BSETBC 300 BSETBC 400 BSETBC 500 BSETBC 800 BSETBC 000 D XL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 25

27 WOOD WATER HEATERS BL Wood water heater BLE Wood-electric water heater BLET Wood-electric water heater - Thermo version Page 26

28 BL WOOD WATER HEATER DESCRIPTION This water heater with zero costs for gas or electricity bills is designed for domestic users wishing to reduce their energy costs for the production of hot water. This model therefore offers characteristics of sustainability, a factor of primary importance for Boschetti. Easy installation, practical operation and safety are also guaranteed in the BLE version (with an electrical heating element to ensure the hot water supply if wood is not available) and the BLET version (where in addition to the electrical heating element, secondary heat sources can also be used). With a combustion chamber with a refractory lining and insulation in high-density glass wool, this water heater is able to generate a hot water supply suitable for the needs of entire families. The tank is finished in vitreous enamel on BL 5/50 and BLE 5/50 versions, and galvanized for 80-litre and BLET 5/50 versions. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. All models have the grate stove-enamelled at 830 C, guaranteeing shininess and resistance to impacts, scratches and heat. On BLET versions, the heat exchangers have a cavity with joints on two sides on 5 and 50 litre versions and a double pipe with rear joints on 80 litre versions The water heater is provided with a suitable coupling /2" for the installation of the safety combined temperature and pressure valve (TP), which controls and limits the temperature and pressure of the hot water inside the product. The combined temperature and pressure valve (TP) is a PED safety device Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 27

29 TECHNICAL DATA AND DIMENSIONS BL - BLE D WOOD VERSION BL WOOD-ELECTRIC VERSION BLE D WOOD WATER HEATER WOOD-ELECTRIC WATER HEATER 2 2 H h h H S S i i G G Cold water inlet Hot water outlet S Water drain 3 Connection for exhaust pipe 2 Connection for TP valve 3 Heating element and thermostat lenght mm 760 DIMENSIONS BL 80 BLE 80 BLE 5 BLE 50 D mm H mm h mm G mm i mm Ø /2" /2" /2" /2" S Ø Ø Ø /2" /2" /2" /2" TECHNICAL DATA BL 80 BLE 80 BLE 5 BLE 50 Capacity L Storage tank Pmax bar Power W Voltage V Efficiency ΔT45 C L/h Weight Kg NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 28

30 TECHNICAL DATA AND DIMENSIONS BLET 80 BLET 5-50 D D BLET WOOD-ELECTRIC WATER HEATER - THERMO VERSION 2 MT H h h3 RT H h3 MT h S S RT h2 h2 i 2 i G G 3 3 MT RT Cold water inlet Hot water outlet Thermo flow Thermo return S Water drain Connection for exhaust pipe 2 Connection for TP valve 3 Heating element and thermostat lenght mm 760 DIMENSIONS BLET 80 BLET 5 BLET 50 D mm H mm h mm h2 mm h3 mm G mm i mm Ø /2" /2" /2" MT - RT Ø 3/4" 3/4" 3/4" S Ø Ø Ø /2" /2" /2" TECHNICAL DATA BLET 80 BLET 5 BLET 50 Capacity L Storage tank Pmax bar Power W Voltage V Efficiency ΔT45 C L/h Exchanger surface m² 0,4 0,60 0,60 THERMO Exchanger efficiency ΔT45 C L/h EXCHANGER Weight Kg NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 29

31 MULTIGAS WATER HEATERS BGM Wall hang multigas storage water heater BGMT Wall hang multigas storage water heater - Thermo version BGM/BI Storage multigas water heater stand on industrial BGMT/BI Storage multigas water heater stand on industrial - Thermo version BGM/CSTF Wall hang multigas water heater sealed chamber forced flow BGM/CS Storage multigas water heater sealed chamber BGM/T/CS Storage multigas water heater sealed chamber - Thermo version BGM/BD Storage multigas water heater stand on domestic BGM/BA Storage multigas water heater stand on commercial BGM/T/BA Storage multigas water heater stand on commercial - Thermo version Page 30

32 BGM WALL HANG MULTIGAS STORAGE WATER HEATER DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed for domestic needs. With its ample combustion chamber, a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. Also available in a thermo version, BGM brings the home a water heating efficiency of 86%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner and internal deflectors are made in stainless steel, to guarantee maximum efficiency and safety over time. The special non-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber. The advantages of the BGM model include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 3

33 TECHNICAL DATA AND DIMENSIONS g2 D df BGM WALL HANG MULTIGAS STORAGE WATER HEATER h H EG G Cold water inlet Natural Gas On demand LPG (BGM/ GPL) Hot water outlet g EG Gas inlet connection i DIMENSIONS BGM/5Q BGM/8Q BGM/0Q BGM/2Q BGM/5Q D mm H mm h mm df mm G mm g mm g2 mm i mm Ø /2" /2" /2" /2" /2" EG Ø /2" /2" /2" /2" /2" TECHNICAL DATA BGM/5Q BGM/8Q BGM/0Q BGM/2Q BGM/5Q Capacity L Storage tank Pmax bar Heat capacity kw 4,6 5,3 5,3 5,3 5,3 Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Consumption Natural Gas m³/h 0,49 0,56 0,56 0,56 0,56 Consumption LPG kg/h 0,36 0,42 0,42 0,42 0,42 Weight Kg ERP BGM/5Q BGM/8Q BGM/0Q BGM/2Q BGM/5Q Energy class B B B B B Load profile M M M L L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 32

34 TECHNICAL DATA AND DIMENSIONS g2 D df BGMT WALL HANG MULTIGAS STORAGE WATER HEATER - THERMO VERSION h H MT h2 EG RT h3 G Cold water inlet Natural Gas On demand LPG (BGMT/ GPL) g MT Hot water outlet Thermo flow i RT Thermo return EG Gas inlet connection DIMENSIONS BGMT/8Q BGMT/0Q BGMT/5Q D mm H mm h mm h2 mm h3 mm df mm G mm g mm g2 mm i mm Ø /2" /2" /2" EG Ø /2" /2" /2" TECHNICAL DATA BGMT/8Q BGMT/0Q BGMT/5Q Capacity L Storage tank Pmax bar Heat capacity kw 5,3 5,3 5,3 Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Consumption Natural Gas m³/h 0,56 0,56 0,56 Consumption LPG kg/h 0,42 0,42 0,42 Exchanger surface m² 0,33 0,33 0,33 THERMO Exchanger efficiency ΔT45 C (3) L/h EXCHANGER Weight Kg ERP BGMT/8Q BGMT/0Q BGMT/5Q Energy class B B B Load profile M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 33

35 BGM/CSTF WALL HANG MULTIGAS WATER HEATER SEALED CHAMBER FORCED FLOW DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed for domestic users, ensuring savings, easy installation, practical operation and safety. With its ample sealed combustion chamber, a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/CSTF brings domestic users a water heating efficiency up to two times higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner and internal deflectors are made in stainless steel, to guarantee maximum efficiency and safety over time. The advantages of the BGM/CSTF model, available in two versions (from 75 to 5 litres, see chart below), include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). Designed from the outset with a coaxial discharge, combustion fumes are expelled from the top by a fan, combined with an air intake with a specific connector on the heater. In addition, the sealed combustion chamber eliminates the "chimney effect", which is the circulation of cold air through the outlet flue for fumes when the burner is turned off. Specific kits are available for conversion into a version with double discharge. The heater is equipped with an electronic control unit, an electric gas valve and electronic ignition. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated Flange for inspection and limescale removal Combustion, ignition and turn-off controls on electronic panel Electronic ignition with ionization flame detection The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 2 years Page 34

36 TECHNICAL DATA AND DIMENSIONS BGM/CSTF WALL HANG MULTIGAS WATER HEATER SEALED CHAMBER FORCED FLOW 20 h H h2 EG Natural Gas On demand LPG (BGM/CSTF GPL) EG Cold water inlet Hot water outlet Gas inlet connection 2 Outer diameter air inlet Inner diameter exhaust fumes DIMENSIONS BGM/8Q/CSTF BGM/2Q/CSTF H mm h mm h2 mm Ø /2" /2" EG Ø 3/8" 3/8" Ø Ø TECHNICAL DATA BGM/8Q/CSTF BGM/2Q/CSTF Capacity L 75 5 Storage tank Pmax bar 6 6 Heat capacity kw 5,0 5,0 Water yeld kw 4,7 4,7 Single drawn at 25 C () L Efficiency ΔT45 C L/h Voltage V Frequency Hz Power consumption W Weight Kg ERP BGM/8Q/CSTF BGM/2Q/CSTF Energy class B B Load profile M L () Thermostat at 70 C. Flow water temperature 0 C. NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 35

37 EXAMPLE OF WATER SUPPLY SYSTEM - COLD WATER INLET - HOT WATER OUTLET HYDRAULIC SETY DEVICE 2 EXPANSION VESSEL 3 WATER SOFTENER OR PURIFIER 4 FILTER 5 PRESSURE-REDUCING VALVE 6 SHUT-OFF VALVE 7 SHUT-OFF VALVE BGM/CSTF WALL HANG MULTIGAS WATER HEATER SEALED CHAMBER FORCED FLOW DISCHARGE EXAMPLES HORIZONTAL KIT VERTICAL KIT SPLIT KIT LENGTH OF CONNECTIONS AIR DISCHARGE MAX 3 Mt without elbow junction MAX 2 Mt with elbow junction 90 MAX Mt with 2 elbow junctions 90 LENGTH OF CONNECTIONS AIR DISCHARGE MAX 2 Mt with elbow junction 90 LENGTH OF CONNECTIONS AIR DISCHARGE MAX 6 Mt without elbow junction MAX 5 Mt with elbow junction 90 MAX 4 Mt with 2 elbow junctions 90 MAX 3 Mt with 3 elbow junctions 90 MAX 2 Mt with 4 elbow junctions 90 MAX Mt with 5 elbow junctions 90 Page 36

38 BGM/BD STORAGE MULTIGAS WATER HEATER STAND ON DOMESTIC DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed for domestic needs. With its ample combustion chamber, a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/BD brings domestic users a water heating efficiency of 86%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner and internal deflectors are made in stainless steel, to guarantee maximum efficiency and safety over time. The special non-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber. The advantages of the BGM/BD model include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 37

39 TECHNICAL DATA AND DIMENSIONS BGM/BD D df STORAGE MULTIGAS WATER HEATER STAND ON DOMESTIC R H EG S Cold water inlet Hot water outlet 45 i g Natural Gas On demand LPG (BGM/BD GPL) EG S Gas inlet connection Water drain G R Recirculation DIMENSIONS BGM/Q/BD BGM/5Q/BD BGM/20Q/BD D mm H mm df mm G mm g mm i mm Ø 3/4" 3/4" 3/4" EG Ø /2" /2" /2" S Ø R Ø 3/4" 3/4" 3/4" TECHNICAL DATA BGM/Q/BD BGM/5Q/BD BGM/20Q/BD Capacity L Storage tank Pmax bar Heat capacity kw 8,2 8,2 8,2 Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Consumption Natural Gas m³/h 0,87 0,87 0,87 Consumption LPG kg/h 0,65 0,65 0,65 Weight Kg ERP BGM/Q/BD BGM/5Q/BD BGM/20Q/BD Energy class B B B Load profile L L L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 38

40 BGM/BA STORAGE MULTIGAS WATER HEATER STAND ON COMMERCIAL DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed to supply large quantities of hot water. With its ample combustion chamber (from 6 to 2 flues), a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. Also available in a thermo version, BGM/BA brings businesses, apartment blocks and communities a water heating efficiency of 87%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner is made in stainless steel, to guarantee maximum efficiency and safety over time. The special double anti-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber and increases the efficiency of the water heater. The advantages of the BGM/BA model include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel, for versions up to 600 litres, and galvanization for all other models). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 2 years Page 39

41 TECHNICAL DATA AND DIMENSIONS D BGM5Q-60Q/BA df BGM80Q-200Q/BA BGM/BA STORAGE MULTIGAS WATER HEATER STAND ON COMMERCIAL R R H S EG EG S i Cold water inlet Hot water outlet G G EG S R Gas inlet connection Water drain Recirculation Natural Gas On demand LPG (BGM/BA GPL) The following models the H2O safety valve is not included: BGM80Q-00Q-50Q-200Q/BA DIMENSIONS BGM5Q/BA BGM20Q/BA BGM30Q/BA BGM40Q/BA BGM50Q/BA BGM60Q/BA BGM80Q/BA BGM00Q/BA BGM50Q/BA BGM200Q/BA D mm Df mm H mm G mm i mm Ø 3/4 3/ EG Ø /2" /2" /2" /2" /2" /2" /2" /2" /2" /2" S Ø /2" /2" /2" /2" /2" /2" ½ 2 ½ R Ø 3/4" 3/4" 3/4" 3/4" " " ½ 2 ½ TECHNICAL DATA BGM5Q/BA BGM20Q/BA BGM30Q/BA BGM40Q/BA BGM50Q/BA BGM60Q/BA BGM80Q/BA BGM00Q/BA BGM50Q/BA BGM200Q/BA Capacity L Storage tank Pmax bar Heat capacity kw ,2 23,2 29,5 29, Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Burner surface m² 0,82,,7 2,2 2,3 2,8 3,3 3,3 3,3 3,3 Consumption Natural Gas m³/h,48,48 2,45 2,45 3,2 3,2 3,6 3,6 3,6 3,6 Consumption LPG kg/h,0,0,83,83 2,32 2,32 2,68 2,68 2,68 2,68 Weight Kg ERP BGM5Q/BA BGM20Q/BA BGM30Q/BA BGM40Q/BA BGM50Q/BA BGM60Q/BA BGM80Q/BA BGM00Q/BA BGM50Q/BA BGM200Q/BA Energy class B B B B C C D D Load profile L XL XL XL XXL XXL XXL XXL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 40

42 TECHNICAL DATA AND DIMENSIONS D df BGM/T/BA STORAGE MULTIGAS WATER HEATER STAND ON COMMERCIAL - THERMO VERSION R H MT h2 RT EG S h i Cold water inlet Hot water outlet MT RT EG Thermo flow Thermo return Gas inlet connection G Natural Gas On demand LPG (BGM/T/BA GPL) S Water drain R Recirculation DIMENSIONS BGM/T/20Q/BA BGM/T/30Q/BA BGM/T/50Q/BA BGM/T/60Q/BA D mm Df mm H mm G mm i mm h mm h2 mm Ø 3/4 MT - RT Ø EG - S Ø /2" /2" /2" /2" R Ø 3/4" 3/4" " " TECHNICAL DATA BGM/T/20Q/BA BGM/T/30Q/BA BGM/T/50Q/BA BGM/T/60Q/BA Capacity L Storage tank Pmax bar Heat capacity kw 4 23,2 29,5 29,5 Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Burner surface m²,,7 2,3 2,8 Consumption Natural Gas m³/h,48 2,45 3,2 3,2 Consumption LPG kg/h,0,83 2,32 2,32 Exchanger surface m² 0,77, 2,03 2,25 THERMO Exchanger efficiency ΔT45 C (3) L/h EXCHANGER Weight Kg ERP BGM/T/20Q/BA BGM/T/30Q/BA BGM/T/50Q/BA BGM/T/60Q/BA Energy class B B C C Load profile XL XL XXL XXL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 4

43 BGM/BI STORAGE MULTIGAS WATER HEATER STAND ON INDUSTRIAL WATER HEATER SUITABLE FOR INDUSTRIAL USE ONLY DESCRIPTION This multigas model (pre-fitted for use with both LPG and methane) has been designed exclusively for use in industrial installations. With its ample combustion chamber (from 22 to 26 flues), a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/BI brings multiple users and industrial buildings a water heating efficiency up to two times higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner is made in stainless steel, to guarantee maximum efficiency and safety over time. The special non-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber. The BGM/BI model is available in several versions (from 800 to 2000 litres, and also with thermo version). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee year Page 42

44 TECHNICAL DATA AND DIMENSIONS D df BGM/BI STORAGE MULTIGAS WATER HEATER STAND ON INDUSTRIAL R H EG S G EG S R Cold water inlet Hot water outlet Gas inlet connection Water drain Recirculation Natural Gas On demand LPG (BGM/BI GPL) DIMENSIONS BGM/800/BI BGM/000/BI BGM/500/BI BGM/2000/BI D mm H mm df mm G mm Ø ½ 2 ½ EG Ø /2 /2 /2 /2 S - R Ø ½ 2 ½ TECHNICAL DATA BGM/800/BI BGM/000/BI BGM/500/BI BGM/2000/BI Capacity L Storage tank Pmax bar Heat capacity kw 47,4 53, Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Burner surface m² 4,5 5,5 7,2 7,8 Consumption Natural Gas m³/h 5 5,6 8,4 8,4 Consumption LPG kg/h 3,7 4,2 6,3 6,3 Weight Kg () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 43

45 TECHNICAL DATA AND DIMENSIONS D df BGMT/BI STORAGE MULTIGAS WATER HEATER STAND ON INDUSTRIAL - THERMO VERSION R MT H h2 RT EG S h G MT RT EG S R Cold water inlet Hot water outlet Thermo flow Thermo return Gas inlet connection Water drain Recirculation Natural Gas On demand LPG (BGMT/BI GPL) DIMENSIONS BGMT/800/BI BGMT/000/BI BGMT/500/BI BGMT/2000/BI D mm H mm df mm G mm h mm h2 mm Ø ½ 2 ½ EG Ø /2 /2 /2 /2 MT - RT Ø S - R Ø ½ 2 ½ TECHNICAL DATA BGMT/800/BI BGMT/000/BI BGMT/500/BI BGMT/2000/BI Capacity L Storage tank Pmax bar Heat capacity kw 47,4 53, Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Burner surface m² 4,5 5,5 7,2 7,8 Consumption Natural Gas m³/h 5 5,6 8,4 8,4 Consumption LPG kg/h 3,7 4,2 6,3 6,3 Exchanger surface m² 2 2,65 3,3 4,9 THERMO Exchanger efficiency ΔT45 C (3) L/h EXCHANGER Weight Kg () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 44

46 BGM/CS STORAGE MULTIGAS WATER HEATER SEALED CHAMBER DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed for industrial users, apartment blocks, communities and homes with multiple services. With its ample sealed combustion chamber (from 6 to 0 flues), a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/CS brings businesses, apartment blocks and large communities a water heating efficiency of 87%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner is made in stainless steel, to guarantee maximum efficiency and safety over time. Designed from the outset with a double discharge, combustion fumes are expelled from the top by a fan, and the air intake at the bottom has a specific connector on the heater. In addition, the sealed combustion chamber eliminates the "chimney effect", which is the circulation of cold air through the outlet flue for fumes when the burner is turned off. Specific kits are available for conversion into a coaxial version. The heater is equipped with an electronic control unit, an electric gas valve and electronic ignition. The advantages of the BGM/CS model, available in several versions (from 200 to 590 litres, and also with thermo version), include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated Electronic ignition with ionization flame detection Combustion, ignition and turn-off controls on electronic panel The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 2 years Page 45

47 TECHNICAL DATA AND DIMENSIONS 2 6 D Since 960 we have produced your hot water BGM/CS STORAGE MULTIGAS WATER HEATER SEALED CHAMBER R H 3 5 S EG i Air suction 2 Flue exhaust 3 Control panel EG Cold water inlet Hot water outlet Gas inlet connection Solenoid gas valve 5 6 Electronic control panel Adjustable flue exhaust fan S R Water drain Recirculation Natural Gas On demand LPG (BGM/CS GPL) DIMENSIONS BGM20Q/CS BGM30Q/CS BGM40Q/CS BGM50Q/CS BGM60Q/CS D mm H mm i mm Ø 3/4" EG Ø 3/4" 3/4" 3/4" 3/4" 3/4" S Ø /2" /2" /2" /2" /2" R Ø 3/4 3/4" 3/4 Ø Ø TECHNICAL DATA BGM20Q/CS BGM30Q/CS BGM40Q/CS BGM50Q/CS BGM60Q/CS Capacity L Storage tank Pmax bar Heat capacity kw 4 23,2 23,2 29,5 29,5 Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Burner surface m²,,7 2,2 2,3 2,8 Consumption Natural Gas m³/h,48 2,45 2,45 3,2 3,2 Consumption LPG kg/h,0,83,83 2,32 2,32 Weight Kg ERP BGM20Q/CS BGM30Q/CS BGM40Q/CS BGM50Q/CS BGM60Q/CS Energy class B B B C C Load profile XL XL XL XXL XXL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 46

48 TECHNICAL DATA AND DIMENSIONS 2 6 D Since 960 we have produced your hot water BGM/T/CS STORAGE MULTIGAS WATER HEATER SEALED CHAMBER - THERMO VERSION R h2 5 MT H 3 h S EG 4 RT 300 i Air suction 2 Flue exhaust Cold water inlet Hot water outlet 3 Control panel MT Thermo flow Solenoid gas valve 5 6 Electronic control panel Adjustable flue exhaust fan RT EG S R Thermo return Gas inlet connection Water drain Recirculation Natural Gas On demand LPG (BGM/T/CS GPL) DIMENSIONS BGM/T/20Q/CS BGM/T/30Q/CS BGM/T/50Q/CS BGM/T/60Q/CS D mm H mm h mm h2 mm i mm Ø 3/4" MT - RT Ø EG Ø 3/4" 3/4" 3/4" 3/4" S Ø /2" /2" /2" /2" R Ø 3/4 Ø Ø TECHNICAL DATA BGM/T/20Q/CS BGM/T/30Q/CS BGM/T/50Q/CS BGM/T/60Q/CS Capacity L Storage tank Pmax bar Heat capacity kw 4 23,2 29,5 29,5 Single drawn at 40 C () L Efficiency ΔT45 C (2) L/h Burner surface m²,,7 2,3 2,8 Consumption Natural Gas m³/h,48 2,45 3,2 3,2 Consumption LPG kg/h,0,83 2,32 2,32 Exchanger surface m² 0,77, 2,03 2,25 THERMO Exchanger efficiency ΔT45 C (3) L/h EXCHANGER Weight Kg ERP BGM/T/20Q/CS BGM/T/30Q/CS BGM/T/50Q/CS BGM/T/60Q/CS Energy class B B C C Load profile XL XL XXL XXL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 47

49 EXAMPLES OF AIR DRAWING PIPES AND SMOKES DISCHARGE BGM/CS STORAGE MULTIGAS WATER HEATER SEALED CHAMBER L L L L SPLIT KIT LENGHT OF SMOKES DISCHARGE (L) MAX 6 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt LENGHT OF AIR DRAWING PIPES (L) MAX 6 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt L 600 PARALLEL SPLIT KIT LENGHT OF SMOKES DISCHARGE (L) MAX 5 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt LENGHT OF AIR DRAWING PIPES (L) MAX 5 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt L L COAXIAL KIT LENGHT OF SMOKES DISCHARGE (L) MAX 3 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt LENGHT OF AIR DRAWING PIPES (L) MAX 3 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt Page 48

50 HEAT PUMP WATER HEATERS AND TREATMENT UNITS BSMPC Wall hang heat pump water heater BSBPC Floor standing heat pump water heater BUTPC Heat pump treatment unit Page 49

51 BSMPC WALL HANG HEAT PUMP WATER HEATER DESCRIPTION This heat pump water heater is designed to exploit the heat of the air as an energy source for the heating of water. In this specific case, it allows much of the heat in the surrounding space to be recovered, thereby becoming an energy source for the production of hot water. Air is compressed inside the machine, where the greater pressure increases its temperature to values that can reach 90 C. In the condenser, made in a double layer of copper to ensure higher efficiency, this heat energy is transferred to the water, which can be heated up to about 60 C. When it passes through the expansion valve at the end of the cycle, the fluid returns to a state of low pressure, and is ready to start the thermodynamic cycle again. BSMPC is the wall-hung water heater that suits well to different applications, maintaining high range functionality. The advantages of this system, which is both ecological and economic, include easy operation, silent operation and low maintenance requirements. It has top performances for what concerns energy savings so that it is labelled with A+ class according to Erp classification which will become effective in 207. COMPT SIZE HIGH EFFICIENCY ROTARY COMPRESSOR ENVIRONMENTAL FRIENDLY GAS ANTI-LEGIONELLA CYCLE LOW NOISE EASY INSTALLATION GUARANTEE 5 YEARS Page 50

52 TECHNICAL DATA BSMPC WALL HANG HEAT PUMP WATER HEATER BSMPC 90 TECHNICAL DATA BSMPC 90 Capacity L 90 Number of tanks nr Average electrical power input Wel 20 Thermal power output Wth 005 Integrated heating element power Wel 200 Net weight (empty/loaded) kg 46 / 36 Maximum water pressure bar 7 Maximum air temperature C 43 Minimum air temperature C 4 Nominal air flow m³/h 30 Requested room value m³ 5 Electrical parameters V - Hz 230V - 50Hz Ingress protection rating Legionella prevention system (at 70 C) Modes Type of gas IPX4 automatic Auto Eco Boost R34a Gas quantity gr 530 Total heating time (according to EN 647)(*) hh:mm 05:30 Heating time in BOOST mode (*) hh:mm 02:25 Heating coil wrapped around the tank nr Energy class Load profile ERP BSMPC 90 A M (*) Inlet air temperature 20 C (5 C max), 20 C at the storage, heating of water from 0 C to 55 C. NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. Page 5

53 DIMENSIONS BSMPC WALL HANG HEAT PUMP WATER HEATER h H A D C B E A A2 S i AE F DIMENSIONS BSMPC 90 Ø /2" Ø /2" S Ø /2" A Ø mm 25 A2 Ø mm 25 A mm 248 B mm 542 C mm 259 D mm 550 E mm 87 F mm 280 H mm 392 h mm 652 i mm 30 A A2 S AE Cold water inlet Hot water outlet Air inlet Air outlet Condensate drain Power supply wire EXAMPLE OF WATER SUPPLY SYSTEM Heat pump Cold water inlet Hot water outlet 7-bar safety valve NOTICE. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 52

54 INSTALLATION The heat pump product range is designed to answer the needs of small, medium and big utilities, adapting to different living environments where the water heater can be installed. BSMPC is the water heater for indoor installation that recovers heat from air with positive temperatures from 4 C to 43 C. During the summer, the fresh air produced by the device can be used to create a pleasant heat reduction inside the installation room while during the winter the outlet air can be ducted outside. BSMPC WALL HANG HEAT PUMP WATER HEATER EXAMPLES OF INSTALLATION WINTER LENGTH OF CONNECTIONS AIR DISCHARGE MAX 8 Mt with elbow junction 90 MAX 6 Mt with 2 elbow junctions 90 Connection type A Connection type B SUMMER Outdoor Outdoor Page 53

55 BSBPC FLOOR STANDING HEAT PUMP WATER HEATER DESCRIPTION This heat pump water heater is designed to exploit the heat of the air as an energy source for the heating of water. In this specific case, it allows much of the heat in the surrounding space to be recovered, thereby becoming an energy source for the production of hot water. Air is compressed inside the machine, where the greater pressure increases its temperature to values that can reach 90 C. In the condenser, made in a double layer of copper to ensure higher efficiency, this heat energy is transferred to the water, which can be heated up to about 60 C. When it passes through the expansion valve at the end of the cycle, the fluid returns to a state of low pressure, and is ready to start the thermodynamic cycle again. BSBPC series is the range of floorstanding heat pump water heaters. With a distinctive design and different models, this series answers the most different needs concerning operating modes and connection to the net, thanks to the additional coils available in the versions. The advantages of this system, which is both ecological and economic, include easy operation, silent operation and low maintenance requirements. On demand for the cold areas it is also available a special version (L version). COMPT SIZE HIGH EFFICIENCY ROTARY COMPRESSOR ENVIRONMENTAL FRIENDLY GAS ANTI-LEGIONELLA CYCLE LOW NOISE EASY INSTALLATION GUARANTEE 5 YEARS Page 54

56 TECHNICAL DATA BSBPC FLOOR STANDING HEAT PUMP WATER HEATER BSBPC 60A BSBPC 200A BSBPC 200AS BSBPC 260A BSBPC 260AS BSBPC 260AST L L L XL XL XL 986 kwh/annum 986 kwh/annum 986 kwh/annum 929 kwh/annum 929 kwh/annum 929 kwh/annum 929 kwh/annum 929 kwh/annum 929 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 59 db 59 db 59 db 59 db 59 db 59 db 57 db 57 db 57 db 57 db 57 db 57 db BSBPC BSBPC BSBPC BSBPC BSBPC BSBPC TECHNICAL DATA 60A 200A 200AS 260A 260AS 260AST Capacity L Average electrical power input Wel Thermal power output Wth Integrated heating element power Wel Net weight (empty/loaded) kg 70 / / / / / / 383 Maximum water pressure bar Maximum air temperature C Minimum air temperature C Nominal air florw m³/h Electrical parameters V - Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz Ingress protection rating IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 Legionella prevention system (at 70 C) automatic automatic automatic automatic automatic automatic Modes Auto Eco Boost Auto Eco Boost Auto Eco Boost Auto Eco Boost Auto Eco Boost Auto Eco Boost Type of gas R34a R34a R34a R34a R34a R34a Gas quantity gr Total heating time (according to EN 647)(*) hh:mm 06:4 07:6 07:6 09:44 09:44 09:44 Heating coil wrapped around the tank nr Heating coil for solar panel nr Additional heating coil nr BSBPC BSBPC BSBPC BSBPC BSBPC BSBPC ERP 60A 200A 200AS 260A 260AS 260AST Energy class A A A A A A Load profile L L L XL XL XL (*) Inlet air temperature 20 C (5 C max), 20 C at the storage, heating of water from 0 C to 55 C. NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. Page 55

57 DIMENSIONS D2 Since 960 we have produced your hot water BSBPC FLOOR STANDING HEAT PUMP WATER HEATER H 3 2 R 2 h2 S 3 h D A A2 S R A Cold water inlet Hot water outlet Condensate drain Recirculation Air inlet 2 3 Coil for solar thermal power Coil for auxiliary heat source Probe immersion sleeve (only in models provided with it) A A2 Air outlet BSBPC BSBPC BSBPC BSBPC BSBPC BSBPC DIMENSIONS 60A 200A 200AS 260A 260AS 260AST Ø Ø S Ø /2" /2" /2" /2" /2" /2" R Ø 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" A Ø mm A2 Ø mm Ø ¼ ¼ ¼ ¼ ¼ ¼ 2 Ø ¼ ¼ ¼ ¼ ¼ ¼ 3 Ø /2" /2" /2" /2" /2" /2" D Ø mm D2 Ø mm H mm h mm h2 mm A mm NOTICE. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 56

58 EXAMPLE OF WATER SUPPLY SYSTEM BSBPC FLOOR STANDING HEAT PUMP WATER HEATER WATER INLET PIPE 2 SHUT-OFF VALVE 3 AUTOMATIC THERMOSTAT MIXING EQUIPMENT 4 HEAT PUMP 5 RICIRCULATION PUMP 6 SPRING CHECK VALVE 7 HOT WATER OUTLET 8 SETY VALVE 9 INSPECTIONABLE END OF DISCHARGE PIPE 0 DRAIN TAP EXPANSION VESSEL INSTALLATION The heat pump product range is designed to answer the needs of small, medium and big utilities, adapting to different living environments where the water heater can be installed. BSBPC series is perfect for the technical room where converges with other systems for the utilization of renewable energy sources: solar thermal, photovoltaic, biomass or geothermal. This range is composed by different models according to the installation requirements of the thermal system. The standard models (A series) work with positive air taken and then released inside (or outside, depending on the season). L series models (for cold areas) instead take the heat from air with either positive or negative temperature and can therefore be installed with single or double duct. STANDARD MODELS (A SERIES) MODELS FOR COLD AREAS (L SERIES) Page 57

59 EXAMPLES OF INSTALLATION In the summer the outlet fresh air, with thermal load from to BTU, can be used to produce a pleasant heat reduction inside the installation room while during the winter it can be ducted and released outside. BSBPC FLOOR STANDING HEAT PUMP WATER HEATER WINTER SUMMER LENGTH OF CONNECTIONS AIR DISCHARGE MAX 8 Mt with elbow junction 90 MAX 6 Mt with 2 elbow junctions 90 PREPARATION OF THE INSTALLATION SITE MINIMUM SPE Outdoor X 650 X2 650 X3 200 Y 300 Page 58

60 REMOTE CONNECTIONS The water heater is configured to be connected to other remote systems, especially the photovoltaic and solar thermal systems. The user interface has two digital inputs that can control the heat pump functioning in order to optimize the performance of the solar thermal system and use the electric energy overproduction of the photovoltaic system to produce DHW even without any demand from the water circuit. In this case it is possible to transform electrical energy into thermal energy raising the water temperature up to the value set by the user (70 C default temperature). The S and ST models are provided with one or two additional coils that allow the connection to other thermal sources, such as the boiler or a geothermal source to maximize the connectivity of the thermal system and to allow a better energy management. BSBPC FLOOR STANDING HEAT PUMP WATER HEATER EXAMPLES OF REMOTE CONNECTIONS Example of connection between a photovoltaic panel and a BSBPC water heater. The inverter manages the electrical energy flow that feeds the water heater. Example of connection between a solar collector and a BSBPC water heater. The heat transferred by the sun heats the water inside the tank through the additional coil of the S and ST versions. Integration between an hybrid panel PV-T (photovoltaic and thermal) and a BSBPC water heater. The control electronics manages the electrical and thermal flows between panel and water heater. Solution available for models S and ST. Integration composed by a solar thermal collector, a heat generator (gas or biomass) and a BSBPC water heater with ST version. Page 59

61 BUTPC HEAT PUMP TREATMENT UNIT DESCRIPTION This heat pump treatment unit is designed to exploit the heat of the air as an energy source for the heating of water. In this specific case, it allows much of the heat in the surrounding space to be recovered, thereby becoming an energy source for the production of hot water. Air is compressed inside the machine, where the greater pressure increases its temperature to values that can reach 90 C. In the condenser, made in a double layer of copper to ensure higher efficiency, this heat energy is transferred to the water, which can be heated up to about 60 C. When it passes through the expansion valve at the end of the cycle, the fluid returns to a state of low pressure, and is ready to start the thermodynamic cycle again. BUTPC is the innovate unit to be combined with an external water storage for the renewal of the sanitary water heater, ideal for renovation projects. It is equipped with two temperature probes to be installed into the remote water storage. Furthermore, the electronic control of BUTPC is programmed to drive a circulation pump and an heating element (both external, not included). The advantages of this system, which is both ecological and economic, include easy operation, silent operation and low maintenance requirements. COMPT SIZE HIGH EFFICIENCY ROTARY COMPRESSOR ENVIRONMENTAL FRIENDLY GAS AUTO-DEFROSTING SYSTEM LOW NOISE EASY INSTALLATION GUARANTEE 5 YEARS Page 60

62 TECHNICAL DATA BUTPC HEAT PUMP TREATMENT UNIT BUTPC V XL BUTPC V2 XL 460 kwh/annum 460 kwh/annum 460 kwh/annum 49 kwh/annum 49 kwh/annum 49 kwh/annum 60 db 60 db 55 db 60 db TECHNICAL DATA BUTPC V BUTPC V2 Average electrical power input Wel Thermal power output Wth Heating element power Wel 500 (not included) 500 (not included) Net weight kg Maximum water pressure bar - - Maximum air temperature C Minimum air temperature C -7-7 Nominal air florw m³/h 350/ /700 Electrical parameters V - Hz 230V - 50Hz 230V - 50Hz Ingress protection rating IPX4 IPX4 Legionella prevention system (at 70 C) automatic automatic Modes Auto Eco Boost Auto Eco Boost Type of gas R34a R34a Gas quantity gr Total heating time (according to EN 647)(*) hh:mm 08:29 05:44 Condenser type Plate Plate Cycle inversion No No Circulation pump Not included Not included Temperature probes for remote tank N 2, included N 2, included ERP BUTPC V BUTPC V2 Energy class A A Load profile XL XL (*) Inlet air temperature 20 C (5 C max), 20 C at the storage, heating of water from 0 C to 55 C. Page 6

63 DIMENSIONS BUTPC HEAT PUMP TREATMENT UNIT D G E S F B Cold water inlet S Hot water outlet Condensate drain C A A2 Air inlet Air outlet A2 A A EXAMPLE OF WATER SUPPLY SYSTEM DIMENSIONS BUTPC V BUTPC V2 Ø 3/4" 3/4" Ø 3/4" 3/4" S Ø /2" /2" A Ø mm A2 Ø mm A mm B mm C mm D mm E mm F mm G mm WATER INLET 2 SHUT-OFF VALVE 3 SETY VALVE 4 HYDRAULIC CIRCUIT EXPANSION VESSEL 5 AUTOMATIC MIXING VALVE 6 HOT WATER OUTLET 7 PRESSURE STABILISER 8 INSPECTABLE DRAIN COLLECTOR 9 RECIRCULATION PUMP 0 HEAT PUMP EXPANSION VESSEL (0,5/ L) TECHNICAL WATER CIRCUIT 2 AUTOMATIC AIR VENT VALVE 3 BOILER 4 NTC HIGHER PROBE (RED MARK) 5 NTC LOWER PROBE (BLUE MARK) 6 ELECTRICAL HEATING ELEMENT (IF PRESENT) 7 CONDENSATE DRAIN A TECHNICAL COLD WATER OUTLET B TECHNICAL HOT WATER INLET NOTICE. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 62

64 INSTALLATION The heat pump product range is designed to answer the needs of small, medium and big utilities, adapting to different living environments where the water heater can be installed. The external unity BUTPC can be connected to tanks with vertical installation and capacity up to 500 liters, provided with a coil with a minimum surface of m². Depending on the season, the outlet air can be ducted outside or spread inside the house creating a pleasant heat reduction. BUTPC HEAT PUMP TREATMENT UNIT PREPARATION OF THE INSTALLATION SITE MINIMUM SPE Boiler MODEL BUTPC V BUTPC V2 X 2000 mm 2000 mm X2 (min) 300 mm 300 mm X3 28 kg 36 kg EXAMPLES OF INSTALLATION LENGTH OF CONNECTIONS AIR DISCHARGE/AIR INTAKE MAX 8 Mt with elbow junction 90 MAX 6 Mt with 2 elbow junctions 90 INSTALLING A SINGLE CHANNEL INSTALLING DUAL CHANNEL REMOTE CONNECTIONS BUTPC can aslo be connected to other remote energy systems. The user interface has two digital inputs that can control the heat pump functioning in order to optimize the performance of the solar thermal system and use the electric energy overproduction of the photovoltaic system to produce DHW even without any demand from the water circuit. Page 63

65 BOILERS WITH DOUBLE WALLED EXCHANGER BDPO3R Insulated horizontal boiler with double walled 3 years Page 64

66 BDPO3R INSULATED HORIZONTAL BOILER WITH DOUBLE WALLED 3 YEARS DESCRIPTION This horizontal boiler has an internal cavity that transfers the thermal energy of the hot water provided by external sources, like a heating appliance or solar panels, to the water in the main tank, making extra supplies of hot water available. Available in seven versions (from 80 to 500 litres), this model has a variety of applications ranging from domestic to commercial applications. The advantages of the BDPO3R model include the large heat exchange surface of the cavity, which surrounds more than two-thirds of the hot water tank. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective resin finishes (polymerized at high temperatures), enhancing the quality of the final product. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the models from 200 to 500 litres the insulation is in soft thick polyurethane (30 mm), finished externally in Skay pvc cover Housing in white-painted sheet metal for models up to 50 litres The exchanger can work with heated or solar water Teflon treatment tank The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 65

67 TECHNICAL DATA AND DIMENSIONS L L L2 L3 L6 L5 MT BDPO3R INSULATED HORIZONTAL BOILER WITH DOUBLE WALLED 3 YEARS D AN L7 L4 RT h G Cold water inlet Hot water outlet MT Thermo flow RT Thermo return AN Magnesium anode ¼ Sensor ¼ DIMENSIONS BDPO3R 80 BDPO3R 00 BDPO3R 25 BDPO3R 50 BDPO3R 200 BDPO3R 300 BDPO3R 500 D Ø L mm L mm , ,5 452,5 482,5 442,5 L2 mm L3 mm , ,5 452,5 482,5 442,5 L4 mm L5 mm L6 mm L7 mm h mm ,5 32,5 82,5 G mm Ø 3/4" 3/4" 3/4" ¼ ¼ ¼ ¼ MT - RT Ø ¼ ¼ ¼ ¼ ¼ ½ ½ TECHNICAL DATA BDPO3R 80 BDPO3R 00 BDPO3R 25 BDPO3R 50 BDPO3R 200 BDPO3R 300 BDPO3R 500 Capacity L Storage tank Tmax C Storage tank Pmax bar Exchanger Pmax bar Fluid heating flow L/h Surface m² 0,4 0,55 0,86 0,9,7,68 2,42 Capacity L 4,9 6,7 0,5 4,2 20,3 30,3 Efficiency Kcal/h Efficiency ΔT45 C L/h Weight Kg THERMO EXCHANGER Heating fluid 80 C ERP BDPO3R 80 BDPO3R 00 BDPO3R 25 BDPO3R 50 BDPO3R 200 BDPO3R 300 BDPO3R 500 Energy class E E E NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 66

68 BOILERS WITH WELDED COIL BSSV Vertical boiler with welded coil BSSV PLUS Vertical boiler with welded coil Plus (for solar panels) B2SSV Vertical boiler with 2 welded coils B2SSV PLUS Vertical boiler with 2 welded coils Plus (for solar panels) BSSMV Vertical boiler with high power welded coil (for heat pump) Page 67

69 BSSV VERTICAL BOILER WITH WELDED COIL DESCRIPTION This vertical boiler with a fixed heat exchanger has an internal coil that transfers the thermal energy of the hot water provided by external sources, like a heating appliance or solar panels, to the water in the tank, making extra supplies of hot water available. Available in seven versions (from 50 to 000 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of BSSV include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the 750-litre and 000-litre versions, insulation is in soft thick polyurethane (00 mm), finished externally in Skay pvc cover The exchanger can work with heated water or solar Glass lined tank Boilers up to 500 litres are supplied complete with a magnesium alloy anode. 750-litre and 000-litre boilers are supplied complete with an electronic anode Guarantee 5 years Page 68

70 TECHNICAL DATA AND DIMENSIONS BSSV BSSV BSSV VERTICAL BOILER WITH WELDED COIL Sensor Ø20 (BSSV ) Sensor /2 (BSSV ) 2 Recirculation 3 Sensor Ø20 (BSSV ) Sensor /2 (BSSV ) 4 Electrical heating resistance ½ 5 Thermometer /2 6 Magnesium anode ½ 7 Security vent valve ½ 8 Drainage 3/4 (BSSV ) Drainage ½ (BSSV ) AN Electronic anode /2" AS Solar flow RS Solar return FL Inspection flange Ø80 Cold water inlet (BSSV ) Cold water inlet ¼ (BSSV ) Hot water outlet (BSSV ) Hot water outlet ¼ (BSSV ) DIMENSIONS BSSV 50 BSSV 200 BSSV 300 BSSV 400 BSSV 500 BSSV 750 BSSV 000 D Ø D2 Ø Height mm mm mm FL mm RS mm AS mm TECHNICAL DATA BSSV 50 BSSV 200 BSSV 300 BSSV 400 BSSV 500 BSSV 750 BSSV 000 Capacity L Storage tank Tmax C Storage tank Pmax bar Exchanger surface m² 0,6,0,4,5,8 2,4 3,0 Exchanger capacity L 4,0 7,0 9,0 9,5 2,0 5,9 9,8 Exchanger Pmax bar Weight Kg SOLAR EXCHANGER ERP BSSV 50 BSSV 200 BSSV 300 BSSV 400 BSSV 500 BSSV 750 BSSV 000 Energy class B B B C C C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 69

71 EXAMPLE OF WATER SUPPLY SYSTEM BSSV VERTICAL BOILER WITH WELDED COIL FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 70

72 B2SSV VERTICAL BOILER WITH 2 WELDED COILS DESCRIPTION This vertical boiler with two welded heat exchangers has a pair of internal coils that transfer the thermal energy of the hot water provided by external sources, like a heating appliance or solar panels, to the water in the tank, making extra supplies of hot water available. Available in six versions (from 200 to 000 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of B2SSV include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the 750-litre and 000-litre versions, insulation is in soft thick polyurethane (00 mm), finished externally in Skay pvc cover The exchangers can work with heated water or solar Glass lined tank Boilers up to 500 litres are supplied complete with a magnesium alloy anode. 750-litre and 000-litre boilers are supplied complete with an electronic anode Guarantee 5 years Page 7

73 TECHNICAL DATA AND DIMENSIONS B2SSV B2SSV B2SSV VERTICAL BOILER WITH 2 WELDED COILS Sensor Ø20 (B2SSV ) Sensor /2 (B2SSV ) 2 Recirculation 3 Sensor Ø20 (B2SSV ) Sensor /2 (B2SSV ) 4 Electrical heating resistance ½ 5 Thermometer /2 6 Magnesium anode ½ 7 Security vent valve ½ 8 Drainage 3/4 (B2SSV ) Drainage ½ (B2SSV ) AN Electronic anode /2" AS Solar flow RS Solar return AS2 Thermo flow RS2 Thermo return FL Inspection flange Ø80 Cold water inlet (B2SSV ) Cold water inlet ¼ (B2SSV ) Hot water outlet (B2SSV ) Hot water outlet ¼ (B2SSV ) DIMENSIONS B2SSV 200 B2SSV 300 B2SSV 400 B2SSV 500 B2SSV 750 B2SSV 000 D Ø D2 Ø Height mm mm mm FL mm RS mm AS mm RS2 mm AS2 mm TECHNICAL DATA B2SSV 200 B2SSV 300 B2SSV 400 B2SSV 500 B2SSV 750 B2SSV 000 Capacity L Storage tank Tmax C Storage tank Pmax bar Higher exchanger surface m² 0,6,0,0,2,8 2,4 Higher exchanger capacity L 4,0 7,0 7,0 8,0,9 5,9 Higher exchanger Pmax bar Lower exchanger surface m²,0,4,5,8 2,4 3,0 Lower exchanger capacity L 7,0 9,0 9,5 2,0 5,9 9,8 Lower exchanger Pmax bar Weight Kg ERP B2SSV 200 B2SSV 300 B2SSV 400 B2SSV 500 B2SSV 750 B2SSV 000 Energy class B B C C C C HIGHER THERMO EXCHANGER LOWER SOLAR EXCHANGER NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 72

74 EXAMPLE OF WATER SUPPLY SYSTEM B2SSV VERTICAL BOILER WITH 2 WELDED COILS FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 73

75 BSSV PLUS VERTICAL BOILER WITH WELDED COIL PLUS (FOR SOLAR PANELS) DESCRIPTION This vertical boiler with a fixed heat exchanger has an internal coil that transfers the thermal energy of the hot water provided by external sources, and in particular by solar panels, to the water in the tank, making extra supplies of hot water available. Available in four versions (from 200 to 500 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of BSSV PLUS include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. This boiler also has a solar electronic control unit and an electric pump that communicate with the solar panel using a sensor, allowing the circulation of hot water in the heat exchanger to be optimized. The BSSV PLUS pre-fitted for the connection of a solar expansion tank if desired. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The exchanger can work with heated water or solar Glass lined tank The boiler is equipped with a pre-mounted two lines solar station and an electrically connected solar control unit Furthermore the boiler provides the possibility for fixing the solar expansion vessel The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years (boiler) and 2 years (control unit and solar assembly) Page 74

76 TECHNICAL DATA AND DIMENSIONS BSSV PLUS VERTICAL BOILER WITH WELDED COIL PLUS (FOR SOLAR PANELS) Sensor socket Ø20 2 Recirculation 3 Sensor socket Ø20 4 Electrical heating resistance ½ 5 Connection for thermometer /2 6 Magnesium anode ½ 7 Drainage 3/4 AS Solar flow RS Solar return FL FVE Inspection flange Ø80 Fixing for expansion kit 2 x M8 Cold water inlet Hot water outlet DIMENSIONS BSSV PLUS 200 BSSV PLUS 300 BSSV PLUS 400 BSSV PLUS 500 D Ø D2 Ø Height mm mm mm FL mm RS mm AS mm TECHNICAL DATA BSSV PLUS 200 BSSV PLUS 300 BSSV PLUS 400 BSSV PLUS 500 Capacity L Storage tank Tmax C Storage tank Pmax bar Exchanger surface m²,0,4,5,8 Exchanger capacity L 7,0 9,0 9,5 2,0 Exchanger Pmax bar Weight Kg SOLAR EXCHANGER ERP BSSV PLUS 200 BSSV PLUS 300 BSSV PLUS 400 BSSV PLUS 500 Energy class B B C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 75

77 EXAMPLE OF WATER SUPPLY SYSTEM BSSV PLUS VERTICAL BOILER WITH WELDED COIL PLUS (FOR SOLAR PANELS) FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 76

78 B2SSV PLUS VERTICAL BOILER WITH 2 WELDED COILS PLUS (FOR SOLAR PANELS) DESCRIPTION This vertical boiler with two welded heat exchangers has a pair of internal coils that transfer the thermal energy of the hot water provided by secondary sources, and in particular, for this model, by solar panels, to the water in the tank, making extra supplies of hot water available. Available in four versions (from 200 to 500 litres), this model can provide the ideal solution for the hot water needs of domestic and small commercial users. The advantages of B2SSV Plus include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. This boiler has a solar electronic control unit and an electric pump that communicate with the solar panel using a sensor, allowing the circulation of hot water in the heat exchanger to be optimized. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The exchangers can work with heated water or solar Glass lined tank The boiler is equipped with a pre-mounted two lines solar station and an electrically connected solar control unit Furthermore the boiler provides the possibility for fixing the solar expansion vessel The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years (boiler) and 2 years (control unit and solar assembly) Page 77

79 TECHNICAL DATA AND DIMENSIONS B2SSV PLUS VERTICAL BOILER WITH 2 WELDED COILS PLUS (FOR SOLAR PANELS) Sensor socket Ø20 2 Recirculation 3 Sensor socket Ø20 4 Electrical heating resistance ½ 5 Connection for thermometer /2 6 Magnesium anode ½ 7 Drainage 3/4 AS Solar flow RS Solar return AS2 Thermo flow RS2 Thermo return FL FVE Flange inspection Ø80 Fixing for expansion kit 2 x M8 Cold water inlet Hot water outlet DIMENSIONS B2SSV PLUS 200 B2SSV PLUS 300 B2SSV PLUS 400 B2SSV PLUS 500 D Ø D2 Ø Height mm mm mm FL mm RS mm AS mm RS2 mm AS2 mm TECHNICAL DATA B2SSV PLUS 200 B2SSV PLUS 300 B2SSV PLUS 400 B2SSV PLUS 500 Capacity L Storage tank Tmax C Storage tank Pmax bar Higher exchanger surface m² 0,6,0,0,2 Higher exchanger capacity L 4,0 7,0 7,0 8,0 Higher exchanger Pmax bar Lower exchanger surface m²,0,4,5,8 Lower exchanger capacity L 7,0 9,0 9,5 2,0 Lower exchanger Pmax bar Weight Kg HIGHER THERMO EXCHANGER LOWER SOLAR EXCHANGER ERP B2SSV PLUS 200 B2SSV PLUS 300 B2SSV PLUS 400 B2SSV PLUS 500 Energy class B B C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 78

80 EXAMPLE OF WATER SUPPLY SYSTEM B2SSV PLUS VERTICAL BOILER WITH 2 WELDED COILS PLUS (FOR SOLAR PANELS) FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 79

81 BSSMV VERTICAL BOILER WITH HIGH POWER WELDED COIL (FOR HEAT PUMP) DESCRIPTION This vertical boiler with a welded heat exchanger has an internal coil that transfers the thermal energy of the hot water provided by external sources, like a heating appliance, solar panels or a heat pump, to the water in the tank, making extra supplies of hot water available. Available in four versions (from 200 to 500 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of BSSMV include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. One of the important technological components is the coil, made with a special oval crosssection to increase turbulence and ensure high-efficiency heat exchange. The vast area of its heat-exchange surface makes it possible to produce large quantities of water even at low temperatures. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The exchangers can work with heated water or solar Glass lined tank The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years Page 80

82 TECHNICAL DATA AND DIMENSIONS BSSMV VERTICAL BOILER WITH HIGH POWER WELDED COIL (FOR HEAT PUMP) Sensor Ø20 2 Recirculation 3 Sensor Ø20 4 Electrical heating resistance ½ 5 Thermometer /2" 6 Magnesium anode ½ 7 Drainage 3/4 AS2 Thermo flow RS2 Thermo return FL Flange inspection Ø80 Cold water inlet Hot water outlet DIMENSIONS BSSMV 200 BSSMV 300 BSSMV 400 BSSMV 500 D Ø D2 Ø Height mm mm mm FL mm RS2 mm AS2 mm TECHNICAL DATA BSSMV 200 BSSMV 300 BSSMV 400 BSSMV 500 Capacity L Storage tank Tmax C Storage tank Pmax bar Exchanger surface m² 2,8 3,7 4,7 5,8 Exchanger capacity L 4,0 8,0 30,0 37,0 Exchanger Pmax bar Weight Kg THERMO EXCHANGER ERP BSSMV 200 BSSMV 300 BSSMV 400 BSSMV 500 Energy class B B C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 8

83 EXAMPLE OF WATER SUPPLY SYSTEM BSSMV VERTICAL BOILER WITH HIGH POWER WELDED COIL (FOR HEAT PUMP) FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 82

84 TANKS SPUSV Floor standing vertical tank (with coil) Puffer SPUV Floor standing vertical tank (no coil) Puffer SAR Tank for cooled and hot water Page 83

85 SPUSV FLOOR STANDING VERTICAL TANK (WITH COIL) PUFFER" DESCRIPTION This tank is designed to supply a reserve of heating water to support secondary sources, such as appliances fired with gas, oil or wood, kitchen ranges, fireplaces and other sources of secondary energy. The tank is fitted with a fixed welded-coil heat exchanger for the use of water from solar panels. Available in several versions (from 300 to 2000 litres), this model is guaranteed for operating pressures of 3 bar. The tank, made in thick sheet metal, is rough-finished internally and treated externally with rust-resistant paint. For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the models from 800 to 2000 litres, insulation is in soft thick polyurethane (00 mm), finished externally in Skay pvc cover The exchanger can work with heated water or solar Steel tank with any internal anti-corrosion treatment with external protection paint only Guarantee 5 years Page 84

86 TECHNICAL DATA AND DIMENSIONS SPUSV FLOOR STANDING VERTICAL TANK (WITH COIL) PUFFER Boiler flow ½ 2 Heating system flow ½ 3 Free disposal ½ 4 Return of heating system ½ 5 Heating flow high temperature ½ 6 Heating flow low temperature ½ 7 Gas, fuel or pellet boiler return ½ 8 Wood boiler return ½ SD Sensor for heating and solar systems /2 AS Solar flow RS Solar return DIMENSIONS SPUSV 300 SPUSV 500 SPUSV 800 SPUSV 000 SPUSV 250 SPUSV 500 SPUSV 2000 D Ø D2 Ø Height mm RS mm AS mm TECHNICAL DATA SPUSV 300 SPUSV 500 SPUSV 800 SPUSV 000 SPUSV 250 SPUSV 500 SPUSV 2000 Capacity L Storage tank Tmax C Storage tank Pmax bar Exchanger surface m²,2,8 2,4 3,0 3,0 3,6 4,2 Exchanger capacity L 7,9,9 5,9 9,8 9,8 23,7 27,7 Exchanger Pmax bar Weight Kg SOLAR EXCHANGER ERP SPUSV 300 SPUSV 500 SPUSV 800 SPUSV 000 SPUSV 250 SPUSV 500 SPUSV 2000 Energy class B C C C C C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 85

87 SPUV FLOOR STANDING VERTICAL TANK (NO COIL) PUFFER DESCRIPTION This tank is designed to supply a reserve of heating water to support secondary sources, such as appliances fired with gas, oil or wood, kitchen ranges, fireplaces and other sources of secondary energy. Available in several versions (from 300 to 2000 litres), this model is guaranteed for operating pressures of 3 bar. The tank, made in thick sheet metal, is rough-finished internally and treated externally with rust-resistant paint. For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the models from 800 to 2000 litres, insulation is in soft thick polyurethane (00 mm), finished externally in Skay pvc cover Steel tank with any internal anti-corrosion treatment with external protection paint only Guarantee 5 years Page 86

88 TECHNICAL DATA AND DIMENSIONS SPUV FLOOR STANDING VERTICAL TANK (NO COIL) PUFFER Boiler flow ½ 2 Heating system flow ½ 3 Free disposal ½ 4 Return of heating system ½ 5 Heating flow high temperature ½ 6 Heating flow low temperature ½ 7 Gas, fuel or pellet boiler return ½ 8 Wood boiler return ½ SD Sensor for heating system /2 DIMENSIONS SPUV 300 SPUV 500 SPUV 800 SPUV 000 SPUV 250 SPUV 500 SPUV 2000 D Ø D2 Ø Height mm TECHNICAL DATA SPUV 300 SPUV 500 SPUV 800 SPUV 000 SPUV 250 SPUV 500 SPUV 2000 Capacity L Storage tank Tmax C Storage tank Pmax bar Weight Kg ERP SPUV 300 SPUV 500 SPUV 800 SPUV 000 SPUV 250 SPUV 500 SPUV 2000 Energy class B C C C C C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 87

89 SAR TANK FOR COOLED AND HOT WATER DESCRIPTION This tank is designed to provide a reserve of cooled water to support secondary sources, such as an air-conditioning system, but it can also be used to store hot water for sanitary purposes. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Exclusive pressing and assembly methods and attentive preliminary treatments of all our tanks ensure that galvanization is carried out accurately. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" External finishes are available in Skay pvc cover (SAR/SKAY version) or aluminium plate cover (SAR/AL version) Galvanized steel tank Guarantee 2 years Page 88

CITY OPEN - CITY BOX from 25 to 35 kw

CITY OPEN - CITY BOX from 25 to 35 kw CITY OPEN - CITY BOX from 25 to 35 kw Technology and automotive innovation, resistance to sun, rain, frost and salt IPX5-10 C Born to resist IPX5-10 C City Open - City Box STAINLESS STEEL COMBUSTION GROUP

More information

Electric Water Heaters. The STRENGTHS of the product range in detail:

Electric Water Heaters. The STRENGTHS of the product range in detail: Electric Water Heaters The Styleboiler range of electric storage water heaters offers an extensive array of models for the production of domestic hot water (D.H.W.) with a capacity ranging from 10 to 1000

More information

High performances NEW ELECTRIC STORAGE WATER HEATERS

High performances NEW ELECTRIC STORAGE WATER HEATERS High performances NEW ELECTRIC STORAGE S Ariston trusts you. So we listen to you. Every year, millions of customers all over the world choose Ariston products. From this immense trust springs a significant

More information

1 VICTRIX ZEUS Superior kw I features

1 VICTRIX ZEUS Superior kw I features Wall-hung condensing VICTRIX ZEUS Superior kw I is the new range of wall-hung condensing boilers with 54 litre stainless steel storage tank available in two versions with nominal heat output of 26 kw and

More information

Ciao Green Condensing Wall-Hung Boilers

Ciao Green Condensing Wall-Hung Boilers Ciao Green Condensing Wall-Hung Boilers Residential Heating Ciao Green A cost-consciuos condensing boiler CIAO GREEN is one of the condensing boilers with the best price-quality ratio on the matket. Kitchen

More information

Mynute Green k. Condensing Wall-Hung Boilers. Residential Heating

Mynute Green k. Condensing Wall-Hung Boilers. Residential Heating Mynute Green k Condensing Wall-Hung Boilers Residential Heating Mynute Green k The right choice for any installation requirements The high flexibility of installation makes MYNUTE GREEN K the condensing

More information

Divacondens D Plus Atmospheric condensation wall-mounted boilers, with instant domestic hot water production

Divacondens D Plus Atmospheric condensation wall-mounted boilers, with instant domestic hot water production Divacondens D Plus Atmospheric condensation wall-mounted boilers, with instant domestic hot water production THE SIMPLEST SOLUTION FOR A CONDENSING BOILER DIVACONDENS D PLUS is the generator of condensation

More information

AVIO kw Export 1 FEATURES. Wall-mounted with storage tank

AVIO kw Export 1 FEATURES. Wall-mounted with storage tank 1 FEATURES Wall-mounted with storage tank Compact wall-mounted open chamber boiler with conventional flue and 45 litre stainless steel storage tank and nominal heat output of 23.7 kw (20,382 kcal/h). AVIO

More information

Condensing, pre-mixed, wall-hung gas boilers with water tank

Condensing, pre-mixed, wall-hung gas boilers with water tank C 271-01 made in Italy Nias condensing Condensing, pre-mixed, wall-hung gas boilers with water tank Life-enhancing heat GB Condensing, pre-mixed, wall-hung boilers with water tank Nias CONDENSING HIGH

More information

Fonte Lx NEW. Instantaneus Gas Water Heaters, conventional flue, low NOx. Residential Heating. compliant. Fonte Lx 14. Fonte Lx 11

Fonte Lx NEW. Instantaneus Gas Water Heaters, conventional flue, low NOx. Residential Heating. compliant. Fonte Lx 14. Fonte Lx 11 Fonte Lx Instantaneus Gas Water Heaters, conventional flue, low NOx NEW Residential Heating XL M compliant Fonte Lx 14 Fonte Lx 11 FONTE Lx / Gas Water Heaters, conventional flue, low NOx THE RANGE FONTE

More information

WATER HEATERS. Simplicity, performance, comfort... Hydraflo. Unvented Cylinders. 125 to 300 litres, directly or indirectly heated.

WATER HEATERS. Simplicity, performance, comfort... Hydraflo. Unvented Cylinders. 125 to 300 litres, directly or indirectly heated. WATER HEATERS Simplicity, performance, comfort... Hydraflo Unvented Cylinders 125 to 300 litres, directly or indirectly heated. Unvented Hot Water Supply Systems Our unvented cylinders make life easier,

More information

SPECIFICATIONS - NIKE

SPECIFICATIONS - NIKE Wall-mounted instant boilers NIKE Mini kw Special is the ideal Immergas solution for modern building and wherever space is limited and has to be made the most of. Simple to use and easy to install, thanks

More information

C Tahiti. condensing

C Tahiti. condensing C 227-01 m a d e i n I ta ly Tahiti condensing Condensing, pre-mixed, wall-hung boilers KC 24 KC 28 - KC 32 indoor, instantaneous, combination boilers KR 24 KR 38 - KR 32 indoor, central heating only boilers

More information

HIGH POWER. VICTRIX PRO 2 ErP. High power, wall-hung condensation boiler

HIGH POWER. VICTRIX PRO 2 ErP. High power, wall-hung condensation boiler HIGH POWER VICTRIX PRO 2 ErP High power, wall-hung condensation boiler MAIN INDEX INDEX 1 VICTRIX PRO 35-55 2 ErP SPECIFICATIONS...5 2 VICTRIX PRO 80-100-120 2 ErP SPECIFICATIONS...6 3 VICTRIX PRO 35-55

More information

Hamworthy. Dorchester DR-SA & DR-SE Fully Automatic and Permanent Pilot Direct Gas-Fired Storage Water Heaters. Exceeds Minimum Requirements

Hamworthy. Dorchester DR-SA & DR-SE Fully Automatic and Permanent Pilot Direct Gas-Fired Storage Water Heaters. Exceeds Minimum Requirements Exceeds Minimum Requirements Hamworthy Dorchester DR-SA & DR-SE Fully Automatic and Permanent Pilot Direct Gas-Fired Storage Water Heaters 18.9 kw to 20.1 kw, Natural Gas or LPG Continuous outputs 369

More information

Gas Storage Water Heaters CONVENTIONAL FLUE FAN FLUED BALANCED FLUE DIRECT STORAGE TANKS

Gas Storage Water Heaters CONVENTIONAL FLUE FAN FLUED BALANCED FLUE DIRECT STORAGE TANKS Gas Storage Water Heaters CONVENTIONAL FLUE FAN FLUED BALANCED FLUE DIRECT STORAGE TANKS Andrews Storage Water Heaters For the continuous production of hot water in domestic, commercial and industrial

More information

ALKON CARGO. A precise and fast delivery rate. A very high specific flow rate (20 litres per minute with Dt 25)

ALKON CARGO. A precise and fast delivery rate. A very high specific flow rate (20 litres per minute with Dt 25) ALKON CARGO ALKON CARGO model Max/min nominal output Heat input condensing Non-condensing η condensation at 30 part load 35 7,4 35,1 6,7 33,5 34,8 106,3 Efficiency class (directive 92/42) ALKON CARGO is

More information

ACCUMULATION OF EUROPEAN CLASS

ACCUMULATION OF EUROPEAN CLASS ACCUMULATION OF EUROPEAN CLASS Total comfort MODEL nominal output kw minimum output kw DUA PLUS B TN DUA PLUS B TFS natural draught room sealed forced draught 28 12.4 28 12.4 DUA PLUS B was born from the

More information

=Classic range= Classic range technologies. Magnesium anode. Sheathed heating element

=Classic range= Classic range technologies. Magnesium anode. Sheathed heating element =Classic range= Classic range technologies Magnesium anode The magnesium anode is located in the centre of the enamelled tank and provides excellent protection against corrosion; this anode is consumed

More information

Since 1983 Nuova COTERM has developed a wide range of water heaters.

Since 1983 Nuova COTERM has developed a wide range of water heaters. Since 1983 Nuova COTERM has developed a wide range of water heaters. Thank to careful attention to market demands and continuous research towards new solutions, Nuova COTERM is able to offer clients the

More information

Exclusive Green E Condensing Wall-Hung Boilers

Exclusive Green E Condensing Wall-Hung Boilers Exclusive Green E Condensing Wall-Hung Boilers BERETTA HIGH-EFFICIENCY Residential Heating compliant XL Exclusive Green E Energy efficiency at its best EXCLUSIVE GREEN E is Beretta top of the range condensing

More information

Mynute Green Condensing Wall-Hung Boilers

Mynute Green Condensing Wall-Hung Boilers Mynute Green Condensing Wall-Hung Boilers Residential Heating Mynute Green The right choice for any installation requirements WIDE RANGE Mynute is available in a wide range of models and outputs, to meet

More information

EXPLORER HEAT PUMP WATER HEATER. A+ in READY Smart heat pump

EXPLORER HEAT PUMP WATER HEATER. A+ in READY Smart heat pump HEAT PUMP WATER HEATER EXPLORER 7% energy savings * Wide temperature range of use (- to + C) ACI hybrid anti-corrosion protection Smart energy consumption control Remote piloting with Cozytouch technology

More information

2.1 BOILER ROOM BOILER ROOM DIMENSIONS 2.3 CONNECTING UP SYSTEM 2.4 CONNECTING UP FLUE 2.5 ELECTRICAL CONNECTION

2.1 BOILER ROOM BOILER ROOM DIMENSIONS 2.3 CONNECTING UP SYSTEM 2.4 CONNECTING UP FLUE 2.5 ELECTRICAL CONNECTION FONDERIE SIME S.p.A. of Via Garbo 27 - Legnago (VR) - Italy declares that its diesel-burning boilers are produced in accordance with the requirements of article 3 paragraph 3 of Directive PED 97/23/EEC

More information

VICTRIX Superior kw Export VICTRIX Superior kw X Export

VICTRIX Superior kw Export VICTRIX Superior kw X Export Wall-hung condensing VICTRIX Superior kw is the instantaneous sealed chamber wallhung boiler with power of 32 kw which, thanks to condensation technology, is characterised for its high efficiency and guarantees

More information

AGUAdens TM 100% residential condensing D.H.W. wall-mounted water heaters ( litres) AISI 316 D.H.W. WORKING PRESSURE TITANIUM CONDENSING

AGUAdens TM 100% residential condensing D.H.W. wall-mounted water heaters ( litres) AISI 316 D.H.W. WORKING PRESSURE TITANIUM CONDENSING MADE IN ITALY residential condensing D.H.W. up to 10 bar WORKING PRESSURE AISI 316 Ti TITANIUM D.H.W. 100% CONDENSING AGUAdens TM wall-mounted water heaters (16-22 -37 litres) AGUAdensTM INSTANTANEOUS

More information

C Elba Dual. Cast-iron, floor-standing boiler. High quality Italian product. Life-enhancing heat

C Elba Dual. Cast-iron, floor-standing boiler. High quality Italian product. Life-enhancing heat C 146-02 made in Italy Elba Dual Cast-iron, floor-standing boiler High quality Italian product Life-enhancing heat GB Cast-iron, floor-standing boiler Elba Dual RELIABILITY SAFETY QUALITY EASY TO OPERATE

More information

GAS ABSORPTION HEAT PUMP

GAS ABSORPTION HEAT PUMP G A H P VV GAS ABSORPTION HEAT PUMP Water Cooled Gas Fired Absorption Heat Pump > Make a choice to build up the future G A H P VV GAS ABSORPTION HEAT PUMP WATER COOLED GAS FIRED ABSORPTION HEAT T PUMP

More information

ENERGY TOP. Condensing boiler solutions

ENERGY TOP. Condensing boiler solutions ENERGY TOP Condensing boiler solutions 1 ENERGY TOP > ENERGY TOP RANGE A wide array of flexible solutions both for centralised residential application and big commercial plants The increasing need for

More information

HIGH EFFICIENCY POOL DEHUMIDIFIER AND CONDITIONER WITH HIGH HEAT RECOVERY RATES. Air treatment unit. Swimming pool waste air 28 C-65%

HIGH EFFICIENCY POOL DEHUMIDIFIER AND CONDITIONER WITH HIGH HEAT RECOVERY RATES. Air treatment unit. Swimming pool waste air 28 C-65% Dry HIGH EFFICIENCY POOL DEHUMIDIFIER AND CONDITIONER WITH HIGH HEAT RECOVERY RATES Calculation of savings (for illustrative purposes) Operating scheme Note: power rates refer to 10,000 m 3 /h of air and

More information

Power X High Power Condensing Wall-Hung Boilers

Power X High Power Condensing Wall-Hung Boilers Power X High Power Condensing Wall-Hung Boilers NEW Residential Heating/Light Commercial compliant POWER X / High Power Condensing Condensing Wall-Hung Wall-Hung Boilers Boilers Power X: the new high power

More information

INDUSTRIAL / DOMESTIC WATER HEATERS

INDUSTRIAL / DOMESTIC WATER HEATERS INDUSTRIAL / DOMESTIC WATER HEATERS Military hospital Thessaloniki WATER HEATERS ARTEMIS boilers are suitable for use in DOMESTIC, COMMERCIAL and INDUSTRIAL applications for production and storage of the

More information

VICTRIX 90 VICTRIX 115 Wall-hung condensing boilers for high power

VICTRIX 90 VICTRIX 115 Wall-hung condensing boilers for high power VICTRIX 90 VICTRIX 115 Wall-hung condensing boilers for high power VICTRIX 90 is the new wall-hung condensing boiler for room heating only, set-up for independent functioning and for that in cascade mode

More information

STORAGE WATER HEATERS

STORAGE WATER HEATERS Owners Manual STORAG WATR HATRS RBC 200, RBC 300, RBC 400, RBC 500, RBC 500HP, RBC 750, RBC 1000, RBC 1000HP, RBC 1500, RBC 2000, RBC 3000 N v. 1.4 CONTNTS 1 Description... 3 1.1 Models... 3 1.2 Tank protection...

More information

UN-VENTED & VENTED STAINLESS STEEL HOT WATER CYLINDERS

UN-VENTED & VENTED STAINLESS STEEL HOT WATER CYLINDERS UN-VENTED & VENTED STAINLESS STEEL HOT WATER CYLINDERS cyclone key advantages Cyclone... Responding rapidly to changing market expectations we have evolved the Joule Cyclone vented and unvented stainless

More information

Aluminium range of condensing boilers. Works every time. Designed to meet carbon reduction targets. Lifetime service and support

Aluminium range of condensing boilers. Works every time. Designed to meet carbon reduction targets. Lifetime service and support Aluminium range of condensing boilers Outputs from 30kW to 600kW Designed to meet carbon reduction targets Lifetime service and support Works every time. www.pottertoncommercial.co.uk Aluminium range of

More information

VELA COMPACT INSTALLATION USE AND MAINTENANCE

VELA COMPACT INSTALLATION USE AND MAINTENANCE VELA COMPACT GB INSTALLATION USE AND MAINTENANCE IST 04 C 167-04 Dear Customer, Thank you for choosing and buying one of our boilers. Please read these instructions carefully in order to install, operate,

More information

Power X High Power Condensing Wall-Hung Boilers

Power X High Power Condensing Wall-Hung Boilers Power X High Power Condensing Wall-Hung Boilers NEW Residential Heating/Light Commercial compliant POWER X / High Power Condensing Condensing Wall-Hung Wall-Hung Boilers Boilers Power X: the new high power

More information

DOMESTIC HOT WATER AND CENTRAL HEATING SYSTEM

DOMESTIC HOT WATER AND CENTRAL HEATING SYSTEM DOMESTIC HOT WATER AND CENTRAL HEATING SYSTEM S Y S T E M S THE SOURCE OF SUPERIOR SYSTEMS The new Sirrus Radiant wall hung boiler from Sirrus Systems offers good looks, comprehensive safety features and

More information

Recourse to the italian Law - SIENA COURT in case of controversy shall apply.

Recourse to the italian Law - SIENA COURT in case of controversy shall apply. WATER HEATERS 2008 Prices are net from VAT. Recourse to the italian Law - SIENA COURT in case of controversy shall apply. Titanium powered GLASS ENAMELLED made in italy The reason of a choice. Bandini

More information

Capri B Cast iron combination oil-fired boiler with water tank

Capri B Cast iron combination oil-fired boiler with water tank C 151-01 Cast iron combination oil-fired boiler with water tank Life-enhancing heat GB Cast iron combination oil-fired boiler with water tank RELIABILITY SAFETY EASY OPERATION EASE OF MAINTENANCE Life-enhancing

More information

Bluehelix Tech RRT Wall-hung condensing boiler with Ferroli Thermobalance heat cell

Bluehelix Tech RRT Wall-hung condensing boiler with Ferroli Thermobalance heat cell Bluehelix Tech RRT Wall-hung condensing boiler with Ferroli Thermobalance heat cell BLUEHELIX TECH RRT... EVOLUTION GOES ON The generator range comes with the well-tested AISI 304 stainless steel exchanger.

More information

Heat Pump Water Heater Commercial Leaflet 2012

Heat Pump Water Heater Commercial Leaflet 2012 Heat Pump Water Heater Commercial Leaflet 2012 1 Table of contents............... 2 Bosch Group Innovation as a principal Established in 1886 in Stuttgart, Germany, Robert Bosch Corporation has been characterised

More information

CI/Sfb. (53.5) Xh. March Conventional Flue Fan Flued Balanced Flue Direct Storage Tanks

CI/Sfb. (53.5) Xh. March Conventional Flue Fan Flued Balanced Flue Direct Storage Tanks CI/Sfb (5.5) Xh March 200 Conventional Flue Fan Flued Balanced Flue Direct Storage Tanks Standard Range STANDARD RANGE Andrews Model No. 24/9 2/40 40/6 6/62 84/87 SI Metric Imp. SI Metric Imp. SI Metric

More information

NUOS RANGE HEAT PUMP WATER HEATERS

NUOS RANGE HEAT PUMP WATER HEATERS RANGE HEAT PUMP WATER HEATERS 1 HOW TO READ THE SYMBOLS The icons have been designed to facilitate the reading of the features of each product. Ariston makes it possible, from the very beginning, to quickly

More information

SHERPA DHW 75. Th e multifunctional air-water split heat pump. COP > 4 DHW 75 C

SHERPA DHW 75. Th e multifunctional air-water split heat pump. COP > 4 DHW 75 C SHERPA Th e multifunctional air-water split heat pump. PATENTED TECHNOLOGY The combination of an inverter air-water heat pump together with a water-water heat pump allows heating/ and high temperature

More information

Aluminium range of condensing boilers. Works every time. Designed to meet carbon reduction targets. Lifetime service and support

Aluminium range of condensing boilers. Works every time. Designed to meet carbon reduction targets. Lifetime service and support Aluminium range of condensing boilers Outputs from 30kW to 600kW Designed to meet carbon reduction targets Lifetime service and support Works every time. www.pottertoncommercial.co.uk Aluminium range of

More information

COND SYSTEM Condensation boiler outdoor / indoor combined with indoor heaters

COND SYSTEM Condensation boiler outdoor / indoor combined with indoor heaters M 30 RE Heating only for outdoor installation with standard remote control Air heater Aeroclima STYLE 10-15 hot/cold M 50 With stainless steel frame for outdoor installation M 75 - M 100 For outdoor installation

More information

Easyfire Standalone biomass pellet boiler

Easyfire Standalone biomass pellet boiler Easyfire Standalone biomass pellet boiler DESIGN Essential and pleasant AESTETIC, small size If the humanity is in balance with the resources of nature, the respect for the environment will be possible.

More information

CONDOR RAPID CONDOR RAPID/V STEAM FORCED CIRCULATION. Design pressure 11,76 bar Steam production from 45 to Kg/h

CONDOR RAPID CONDOR RAPID/V STEAM FORCED CIRCULATION. Design pressure 11,76 bar Steam production from 45 to Kg/h FORCED CIRCULATION Design pressure 11,76 bar Steam production from 45 to 4.000 Kg/h /V Design pressure 11,76 bar Steam production from 45 to 2.000 Kg/h INDUSTRIAL BOILER ITALY S.R.L. Offices and Production

More information

GFT-060/40/H2. Designed and built According AD-2000 regulation Homologation and branded CE According to the European Directive CE

GFT-060/40/H2. Designed and built According AD-2000 regulation Homologation and branded CE According to the European Directive CE Item 1) TWO THERMAL OIL HEATERS OF 1200 kw EACH 1.1) THERMAL OIL HEATER BODY Brand PIROBLOC Model GFT-060/40/H2 Power 1200 kw Delta Temperature 40 ºC Execution Horizontal Designed and built According AD-2000

More information

WALL HUNG GAS BOILER FOR C.H. AND PREDISPOSTION FOR INSTANTANEOUS D.H.W. PRODUCTION (with optional kit) MODELS 34,8 kw (depotenziata) 50 C

WALL HUNG GAS BOILER FOR C.H. AND PREDISPOSTION FOR INSTANTANEOUS D.H.W. PRODUCTION (with optional kit) MODELS 34,8 kw (depotenziata) 50 C ALKON 50 C ALKON 70 C WALL HUNG GAS BOILER FOR C.H. AND PREDISPOSTION FOR INSTANTANEOUS D.H.W. PRODUCTION (with optional kit) OUTPUT RANGE from 50 to 560 kw (in battery) WORKING TEMPERATURE no limit on

More information

GAS FIRED ATMOSPHERIC ELECTRONIC VERSION kw

GAS FIRED ATMOSPHERIC ELECTRONIC VERSION kw GAS FIRED ATMOSPHERIC ELECTRONIC VERSION 51-102 kw GENERAL DESCRIPTION 900 D a3 1000 762 672 E 222 The PEGASUS F2 range of atmospheric natural gas-fired boilers are constructed of cast iron finned sections

More information

Benefit Cabinets. Performance. Efficiency

Benefit Cabinets. Performance. Efficiency Benefit line Benefit Cabinets The Electrolux Benefit cabinets and counters set the standards of quality, reliability and performance. Designed and tested to work in extremely high temperatures and humid

More information

Technology marries design. The boiler finally becomes a piece of design, emerging as a protagonist in a new domestic environment.

Technology marries design. The boiler finally becomes a piece of design, emerging as a protagonist in a new domestic environment. Technology marries design. The boiler finally becomes a piece of design, emerging as a protagonist in a new domestic environment. Osa S all contained in 18 centimetres SELECTION 2016 the color of your

More information

Benefit Cabinets. Performance. Efficiency

Benefit Cabinets. Performance. Efficiency Benefit line Benefit Cabinets The Electrolux Benefit cabinets and counters set the standards of quality, reliability and performance. Designed and tested to work in extremely high temperatures and humid

More information

SHERPA. Air-water split heat pump. COP > 4 ACS a 60 C

SHERPA. Air-water split heat pump. COP > 4 ACS a 60 C Air-water split heat pump. COP > 4 ACS a 60 C Energy class: 35 55 RENEWALE TECHNOLOGIES Sherpa uses the heat in the air, and transfers it to system terminals in an efficient manner. For each kw of electricity

More information

Solar Thermal Energy

Solar Thermal Energy Solar Thermal Energy INDEX Residential Applications Flat Plate Solar Collectors... 5 SOL 200 and SOL 200 H... 7 Mediterráneo 200... 8 Mediterráneo SLIM 200... 9 Hydraulic fittings and mounting systems...

More information

C Nias Dual. Wall-hung boilers, forced draught, sealed chamber with storage tank. For indoor installation. Life-enhancing heat

C Nias Dual. Wall-hung boilers, forced draught, sealed chamber with storage tank. For indoor installation. Life-enhancing heat C 223-01 made in Italy Nias Dual Wall-hung boilers, forced draught, sealed chamber with storage tank. For indoor installation. Life-enhancing heat GB Wall-hung boilers, forced draught, sealed chamber with

More information

Flue gas condensation...

Flue gas condensation... Flue gas condensation... The combustion process occurs when the oxygen in the air, supporting the combustion, and the gas are brought to a temperature such to start a reaction. This reaction is of exothermic

More information

Stainless Steel Unvented Cylinders

Stainless Steel Unvented Cylinders Stainless Steel Unvented Cylinders 1992 Tornado 1 1996 Tornado Elite 1999 Tornado 2 2002 Tornado and Tempest Stainless Steel Modern Day Requirements More people are finding that today s requirements for

More information

BORA BORA. BORA gas: the best suns THE MODELS BORA GAS ALL INNOVATION STRENGTHS

BORA BORA. BORA gas: the best suns THE MODELS BORA GAS ALL INNOVATION STRENGTHS Gas boilers BORA BORA gas: the best suns BORA BORA GAS IS THE NEW GENERATION OF GAS BOILERS. IT REPEATS "THE BEST SUNSHINE" THAT MADE THE BORA FAMILY A SUCCESS: THE SINGLE BLOCK BOILER CONCEPT AND ABOVE

More information

ARIES DUAL MAINTENANCE MADE IN ITALY IST 04 C

ARIES DUAL MAINTENANCE MADE IN ITALY IST 04 C MADE IN ITALY ARIES DUAL Italian high quality GB IST 04 C 210-01 INSTALLA ATION USE AND MAINTENANCE Dear Customer, Thank you for choosing and buying one of our boilers. Please read these instructions carefully

More information

H o t Wa te r Syste m s. Ultrasteel. Unvented Hot Water Cylinders. Exceeding the Standard

H o t Wa te r Syste m s. Ultrasteel. Unvented Hot Water Cylinders. Exceeding the Standard H o t Wa te r Syste m s Unvented Hot Water Cylinders Ultrasteel Exceeding the Standard STEP UP TO... Ultrasteel... is the new Albion unvented hot water storage system. Based on the company s experience

More information

Room sealed circuit appliance sold without the terminal or the combustion air supply and exhausted gas ducts. TYPE C 63 TYPE B TYPE B 23

Room sealed circuit appliance sold without the terminal or the combustion air supply and exhausted gas ducts. TYPE C 63 TYPE B TYPE B 23 Room sealed circuit appliance sold without the terminal or the combustion air supply and exhausted gas ducts. TYPE C 63 TYPE B Type B 23 on the wall Ø 80 duct, available in the following lengths: 1000,

More information

Incident Summary (II )

Incident Summary (II ) Incident Summary (II-636492-2018) Incident Date December 15, 2017 Location Langley SUPPORTING INFORMATION Regulated industry sector Impact Injury Damage Qty injuries 0 Injury description Injury rating

More information

VICTRIX 50 1 SPECIFICATIONS. Wall mounted condensing boilers

VICTRIX 50 1 SPECIFICATIONS. Wall mounted condensing boilers Wall mounted condensing boilers VICTRIX 50 is the new wall-mounted central heating condensing boiler. It is pre-arranged for single and cascade operation (up to 3 appliances connected), with the advantage

More information

Air to water Heat Pump System

Air to water Heat Pump System Air to water Heat Pump System 2 The heating and cooling systems of the future! A step in the right direction of reducing pollution and CO₂ emissions The increase of CO₂ and other green house gases is a

More information

Sweden s leading air source heat pump

Sweden s leading air source heat pump - Since 1939 ExoAir / ExoAir Polaris GreenEnergy Sweden s leading air source heat pump BEST IN TEST The Swedish Energy Council recently scored the Euronom air source heat pump as the leading product of

More information

VERTINOX. AISI 316 stainless steel accumulators with one or two heat exchangers, fixed or removable type

VERTINOX. AISI 316 stainless steel accumulators with one or two heat exchangers, fixed or removable type 27-0514 VERTINOX AISI 316 stainless steel accumulators with one or two heat exchangers, fixed or removable type VERTINOX: THE RELIABLE HEART The boiler for hot sanitary water production is the heart of

More information

Stainless steel range of condensing boilers. Designed to meet carbon reduction targets. Lifetime service and support. Outputs from 50kW to 660kW

Stainless steel range of condensing boilers. Designed to meet carbon reduction targets. Lifetime service and support. Outputs from 50kW to 660kW Stainless steel range of condensing boilers Outputs from 50kW to 660kW Designed to meet carbon reduction targets Lifetime service and support Totally dependable. page 1 www.pottertoncommercial.co.uk Contents

More information

unvented indirect & sealed heating systems unvented direct system & electric space heating Hot and cold water supply to all outlets at mains pressure

unvented indirect & sealed heating systems unvented direct system & electric space heating Hot and cold water supply to all outlets at mains pressure Heating Hot water Renewables UNVENTED CYLINDERS 80-500 LITRES Maximum hot water, minimum fuss Being able to turn on any tap in the home and get hot and cold water at mains pressure is something that we

More information

Rapid. Suspended Warm Air Heater. Caring for the environment!

Rapid. Suspended Warm Air Heater. Caring for the environment! Rapid Suspended Warm Air Heater Caring for the environment! RAPID The QUICK and ECOLOGICAL Suspended Heater Our RAPID heaters were conceived and designed for the heating of industrial and commercial buildings.

More information

Light oil - kerosene burner

Light oil - kerosene burner Installation, use and maintenance instructions Light oil - kerosene burner One stage operation CODE MODEL TYPE 374374 G3B 437T 90 (4) - 05/0 TECHNICAL FEATURES TYPE 437T Thermal power output 9 35 kw.6

More information

Soak in the Sunshine. Solar Hot Water

Soak in the Sunshine. Solar Hot Water Soak in the Sunshine Solar Hot Water Soak in the sunshine, and SAVE with solar hot water from Chromagen USES UP TO 80% LESS ENERGY With a solar hot water system from Chromagen, you can literally soak in

More information

Gas-Fired Condensing Boilers A Green Start To Space & Water Heating

Gas-Fired Condensing Boilers A Green Start To Space & Water Heating Gas-Fired Condensing Boilers A Green Start To Space & Water Heating Residential space and water heating boiler solutions with up to 98.7% efficiency and 57.2 to 151.6 MBH inputs. 1 New! Bosch residential

More information

MYdens T 5WARRANTY 1:20. Ti TITANIUM. commercial gas condensing boilers. boilers from 60 to 280 kw AISI 316 YEARS WORKING PRESSURE HEAT EXCHANGER

MYdens T 5WARRANTY 1:20. Ti TITANIUM. commercial gas condensing boilers. boilers from 60 to 280 kw AISI 316 YEARS WORKING PRESSURE HEAT EXCHANGER MADE IN ITALY commercial gas condensing boilers up to 11 bar WORKING PRESSURE YEARS WARRANTY HEAT EXCHANGER AISI 316 Ti TITANIUM up to 1:20 TURNDOWN RATIO MYdens T boilers from 60 to 280 kw FOREFRONT TECHNOLOGY

More information

Design Manual. Pre-assembled unit (LINK) Heating and Cooling/Heating modular groups. Platform PRO

Design Manual. Pre-assembled unit (LINK) Heating and Cooling/Heating modular groups. Platform PRO Design Manual Pre-assembled unit (LINK) Heating and Cooling/Heating modular groups Platform PRO Revision: A Code: D-MNL033 This manual has been drawn up and printed by Robur S.p.A.; whole or partial reproduction

More information

PICTOR DUAL CTN 24/RTN 24 CTFS 24/RTFS 24 CTFS 28/RTFS 28 INSTALLATION USE AND MAINTENANCE IST 04 C

PICTOR DUAL CTN 24/RTN 24 CTFS 24/RTFS 24 CTFS 28/RTFS 28 INSTALLATION USE AND MAINTENANCE IST 04 C PICTOR CTN 24/RTN 24 CTFS 24/RTFS 24 CTFS 28/RTFS 28 DUAL GB INSTALLATION USE AND MAINTENANCE IST 04 C 161-02 Dear Customer, Thank you for choosing and buying one of our boilers. Please read these instructions

More information

MAX O GAZ. Condensing water heater TECHNICAL MANUAL

MAX O GAZ. Condensing water heater TECHNICAL MANUAL MAX O GAZ Condensing water heater TECHNICAL MANUAL 2 CONTENTS THE COMPONENTS OF THE MAX O GAZ.. 1 4 BALANCED FLUE AND CONVENTIONAL FLUE MAX O GAZ FEATURES. 3 6 INSTALLATION OF THE MAX O GAZ... 5 8 STANDARD

More information

Flamco. Water heaters, storage tanks and accessories DUO WATER HEATER SUPASTOR WATER HEATER LS STORAGE TANKS WATER HEATERS, STORAGE TANKS

Flamco. Water heaters, storage tanks and accessories DUO WATER HEATER SUPASTOR WATER HEATER LS STORAGE TANKS WATER HEATERS, STORAGE TANKS WATER HEATERS, STORAGE TANKS 6 Flamco and accessories DUO WATER HEATER SUPASTOR WATER HEATER LS STORAGE TANKS 2007 edition / UK Flamco glass lined water heaters for potable and heating installations Flamco

More information

BF1 GLASSLINED CYLINDERS WITH REMOVABLE STAINLESS STEEL HEAT EXCHANGER ( LITRES)

BF1 GLASSLINED CYLINDERS WITH REMOVABLE STAINLESS STEEL HEAT EXCHANGER ( LITRES) BF1 GLASSLINED CYLINDERS WITH REMOVABLE STAINLESS STEEL (1.500-5.000 LITRES) VETRIFICATO GLASSLINED BF1 1500-2000 - 3000-5000 KEYWORD 1: Primary fluid inlet (heating side); 2: Primary fluid outlet (heating

More information

Protection and Control of Solid Fuel Boilers

Protection and Control of Solid Fuel Boilers Protection and Control of Solid Fuel Boilers thermal relief valves thermostatic valves and pump stations draft regulators www.regulus.eu BOILER PROTECTION AGAINST OVERHEATING Solid fuel boilers may get

More information

CAST IRON ATMOSPHERIC BOILERS

CAST IRON ATMOSPHERIC BOILERS CST IRON TMOSPHERIC OILERS 006 gas-fired, central heating only, electronic ignition High efficiency boilers designed heating large domestic application. Ideal for installation in any boiler room. Cast-iron

More information

HEATBANK Xcel Thermal Store The solution to multi-fuel heating. Renewable Energy Solutions

HEATBANK Xcel Thermal Store The solution to multi-fuel heating. Renewable Energy Solutions HEATBANK Xcel Thermal Store The solution to multi-fuel heating Renewable Energy Solutions A Leading Supplier of Renewable Heat Products and Flue Systems 0333 999 7974 // www.specflue.com Suitable for simultaneous

More information

New Panasonic Aquarea DHW. Domestic Hot Water Tanks

New Panasonic Aquarea DHW. Domestic Hot Water Tanks New Panasonic Aquarea DHW. Domestic Hot Water Tanks DHW tank with built-in Heat Pump. The Heat Pump is one of the most energy efficient and cost effective methods of water heating. The pump is mounted

More information

RENEWABLE ENERGY THERMAL SOLAR ENERGY. RENEWABLE ENERGY...pag. 05

RENEWABLE ENERGY THERMAL SOLAR ENERGY. RENEWABLE ENERGY...pag. 05 THERMAL SOLAR ENERGY CATALOGUE OCTOBER 2008 INDEX RENEWABLE ENERGY THERMAL SOLAR ENERGY RENEWABLE ENERGY...pag. 05 SISTEMA CS 25 RN TAU... pag. 6 SISTEMA CS 25 RN - CS 25 RN PLUS... pag. 8 SISTEMA CSL

More information

The iqe Boiler Range. Combination and System T Boilers.

The iqe Boiler Range. Combination and System T Boilers. The iqe Boiler Range Combination and System T Boilers www.iqe.co.uk iqe - Max Technology Max Efficiency iqe is a select group of partners that have come together to create a unique product range of highly

More information

WHE 2.24 / WHE 2.24 FF

WHE 2.24 / WHE 2.24 FF EN Wall-hung gas boilers WHE 2.24 WHE 2.24 FF User Guide 300011777-001-C . Contents 1 Introduction.............................................................................3 1.1 Symbols used...........................................................................................3

More information

Main Anthropogenic Sources of Greenhouse Gases Refrigerants

Main Anthropogenic Sources of Greenhouse Gases Refrigerants Main Anthropogenic Sources of Greenhouse Gases Refrigerants Content Refrigerant definition Refrigerants Refrigerants as a source of GHG Refrigerant Definition A refrigerant is a substance or mixture, usually

More information

AIR COOLED HEAT PUMP FOR OUTDOOR INSTALLATION FROM 4,2 TO 35,1 kw

AIR COOLED HEAT PUMP FOR OUTDOOR INSTALLATION FROM 4,2 TO 35,1 kw COMFORT HEAT PUMPS AIR COOLED HEAT PUMP FOR OUTDOOR INSTALLATION FROM 4,2 TO 35,1 kw climaveneta.com COMFORT HEAT PUMPS PERFECT COMFORT AND MAXIMUM EFFICIENCY Air to water heat pump for outdoor installation,

More information

Technology marries design. The boiler finally becomes a piece of design, emerging as a protagonist in a new domestic environment.

Technology marries design. The boiler finally becomes a piece of design, emerging as a protagonist in a new domestic environment. Technology marries design. The boiler finally becomes a piece of design, emerging as a protagonist in a new domestic environment. SELECTION 2016 Osa S all contained in 18 centimetres the color of your

More information

ECO HOT WATER Air-water heat pump for domestic hot water with integrated solar panels and remote control via App GB 02. Ecoenergy.

ECO HOT WATER Air-water heat pump for domestic hot water with integrated solar panels and remote control via App GB 02. Ecoenergy. ECO HOT WTER ir-water heat pump for domestic hot water with integrated solar panels and remote control via pp GB 02 Ecoenergy Ideas to install The Eco Hot Water heat pump The EMMETI heating pumps have

More information

Tower Green HE Hybrid

Tower Green HE Hybrid Tower Green HE Hybrid Condensing Floor-standing Boilers A NEW A NEW Residential Heating plug & play XL TOWER GREEN HE HYBRID / Condensing Floor-standing Boilers Tower Green HE Hybrid: the hybrid technology

More information

maximise the sun s energy with warmflow solar Warmflow Solar

maximise the sun s energy with warmflow solar Warmflow Solar maximise the sun s energy with warmflow solar Warmflow Solar Warmflow Solar warmflow solar - the perfect choice Warmflow has been established as a privately owned company since 1970. During this time we

More information

CONDEXA PRO EXCELLENCE AND VERSATILITY

CONDEXA PRO EXCELLENCE AND VERSATILITY CONDEXA PRO EXCELLENCE AND VERSATILITY CONDEXA PRO Riello Condexa PRO is a condensing pre-mixed, fan-induced, 10:1 modulating wall hung boiler. Designed both for stand-alone and cascade applications up

More information

MySMART Condensing Wall-Hung Boilers

MySMART Condensing Wall-Hung Boilers MySMART Condensing Wall-Hung Boilers NEW Residential Heating INCLUDED compliant XL A + C l a s s s y s t em, w i t h o u t a d di t i o n a l o p t i o n a l s. B e S M A R T W i F i c o n t r o l k i

More information

REMKO HYBRID HEAT PUMPS

REMKO HYBRID HEAT PUMPS REMKO HYBRID HEAT PUMPS Switch over to more efficiency even in old buildings HBW series 1-2014 Quality with systems THE HYBRID TECHNOLOGY Two technologies combined into one innovation "Hybrid comes from

More information

TERMO Combi Cylinder TECHNICAL INFORMATION

TERMO Combi Cylinder TECHNICAL INFORMATION TECHNICAL INFORMATION TERMO Combi Cylinder Tank-In-Tank System using solar energy for hot water and heating support. For integration into the heating circuit as return flow booster or hydraulic compensator.

More information

MASTER VITRO - VITREOUS ENAMELLED STEEL. Models with COILS, production and efficiency! DHW PRODUCTION/STORAGE TANKS

MASTER VITRO - VITREOUS ENAMELLED STEEL. Models with COILS, production and efficiency! DHW PRODUCTION/STORAGE TANKS MASTER VITRO - VITREOUS ENAMELLED STEEL Models with COILS, production and efficiency! Storage tanks that incorporate an exclusive heat exchange system comprising a set of collectors and coils in stainless

More information