CLPS66e DISHWASHER DISHWASHER STANDARD FEATURES MODEL OPTIONS AT EXTRA COST ACCESSORIES DIRECTION OF OPERATION VOLTAGE

Transcription

1 Item # Quantity C.S.I. Section DISHWASHER STANDARD FEATURES 202 racks per hour Opti-RinSe system Rapid Return Conveyor Drive Mechanism Insulated hinged double doors with door interlock switches 19.5 inch chamber height opening Top mounted micro-processer control module Energy saver mode Dirty water indicator Low temperature alert Conveyor dwell Delime notification Service diagnostics NAFEM Data Protocol compliant Computational Fluid Dynamic Designed Self- Aligning Wash Manifolds Stainless steel debossed anti-clogging wash arms Removable Integrated Pump Intake Screen Stainless steel self-draining pumps and impellers Single, sloping scrap screen and deep basket Stainless panels enclose perimeter and bottom Door actuated drain closure Single point electrical connection (three phase only), does not include the booster heater Convertible hot water or low temp final rinse Vent fan and booster heater control DIRECTION OF OPERATION Right to Left Left to Right VOLTAGE 208/60/1 240/60/1 380/60/3 208/60/3 240/60/3 480/60/3 600/60/3 MODEL Dishwasher OPTIONS AT EXTRA COST Stainless steel pressure-less 15/30 KW booster heater Higher than standard chamber ACCESSORIES Stainless steel vent hoods Direct drive unloader Side loader Blower-dryer Drain water tempering kit Flanged feet kit (requires 3 kits) Specifications, Details and Dimensions on Inside and Back. Shown with optional vent hoods DISHWASHER F40211 Dishwasher Page 1 of 12

2 DISHWASHER THE CLe WAREWASHER IS NOW STANDARD WITH MORE EFFICIENT FEATURES THAN EVER... Inside and out the CLe warewashers by Hobart are packed with standard components and patented design innovations that make them the biggest value in the dishwasher industry. The insulated hinged inspection doors provide easy access in the chamber. Exterior wash pipes and reduced interior baffles reduce clean-up time. The Rapid Return drive allows for a wide separation between the wash and the rinse zone. Wash Manifolds. Patent pending Computational Fluid Dynamic designed wash manifolds are selfaligning and come with Hobart s signature debossed anti-clogging nozzles for superior result. The Hobart exclusive microprocessor control module offers a choice of many features, such as an exclusive Energy Saver Mode, Low Temperature Alerts, and Dirty Water Indicator. It also displays pertinent machine status and has a Delime Notification. The controls have built-in Service Diagnostics and are NAFEM Data Protocol Compliant. Soil Management System. Screen design sheds soil more easily than flat screens, reduces frequency of cleaning easy to empty large soil particles... Just lift out the scrap basket. Page 2 of 12 Opti-RinSe. Hobart s exclusive Opti-RinSe significantly reduces operating cost by reducing rinse water and the energy required to heat the water. The unique spray pattern uses large droplets to more efficiently sanitize the ware. OTHER STANDARD FEATURES... Thermal Layer Curtains help keep the heat inside the machine. Ball Detent Clutch Conveyor Drive for maximum protection against conveyor Jams Integrated Removable Pump Intake Screen to offer the ultimate guard of keeping debris from entering the pump. Hinged Door Seals and stainless steel labyrinth seal for drip-free operation Low-Temp Convertibility In Field. All machines shipped hot. Change software in field at set up to low temperature if desired then, if requirements change, convert from one mode to the other in the field. An exclusive feature standard from Hobart. Door Actuated Drain Closure. Closing the door automatically actuates drain closure, eliminates extra manual steps, ensures that closure is in the correct position. F40211 Dishwasher

3 DISHWASHER AVAILABLE OPTIONS AND ACCESSORIES... Flexibility is synonymous with Hobart CLe dishwash - ers. If your operation demands a dishwasher with a vent hood, an extended hood... a power scrapper, just specify the combination of options that suit your needs. Machine Ratings (Mechanical) Racks per hour (19 3 4" x ") 202 Conveyor Speed - feet per minute 5.6 max. Dishes per Hour (Average 25 per rack) 5,025 Glasses per Hour (Average 45 per rack) 9,045 Floor Space Table to Table (Inches) 66 Overall Dimensions H x W x D (Inches) x x Motor H.P. Power Scrapper 2 Wash 2 Built-in Pressureless Stainless Steel Booster Heater. Interwired and interplumbed. Saves on installation and saves floor space. Simplifies operation with just one switch to power dishmachine and booster. Side Loader. Save up to 20 square feet in the dishroom layout with an optional C-Line Side Loader. Racks are indexed 90 into the dishwasher automatically a feature that cuts space and reduces labor dramatically. Your dishroom team will appreciate this feature. OTHER AVAILABLE ACCESSORIES... Blower-dryer, steam booster heater, and a singlepoint electrical connection to include electric booster heater. Conveyor Drive H.P. 1 6 Number of Wash Tanks 2 Tank Capacity Gallons Power Scrapper 23 Wash 23 Pump Capacity Gallons per Minute - Weir Test 165 Heating Equipment (For keeping power wash hot) Gas Burners (with Natural Gas) Electric Heating Unit Size Used Optional Booster Heater / Final Rinse 78,000 BTU per hr. 15 KW 15 KW / 30 KW Rinse Minutes operated during hour of maximum operation 60 Final Rinse Flow Gals. per min. At 15 PSI Flow Pressure 1.8 At 20 PSI Flow Pressure 2.1 Final Rinse Flow Gals. per hr. MAXIMUM At 15 PSI Flow Pressure 108 At 20 PSI Flow Pressure 126 Rinse 20 PSI Flow Pressure Gal./Rack Hot Water Sanitizing - Chemical Sanitizing F F Steam Consumption Pounds per hr. - MAXIMUM Approx. 30 lbs. per hr. = 1 boiler H.P. (BHP) Dishwasher, based on 20 PSI steam and on customer supplying final rinse water at 180 F maximum 65 Steam Booster, if used on 20 PSI steam - 20 PSI water flowing F entering water raised to 180 F min. 60 Exhaust Requirements Cubic Feet per minute Entrance End 200 Discharge End 400 Peak Rate of Drain Flow Gallons per minute. (Initial rate with full tank) 38 Shipping Weight Crated Approximate lbs. 613 F40211 Dishwasher Page 3 of 12

4 DISHWASHER Page 4 of 12 F40211 Dishwasher

5 DISHWASHER F40211 Dishwasher Page 5 of 12

6 ELECTRIC L-R Page 6 of 12 F40211 Dishwasher

7 ELECTRIC R-L F40211 Dishwasher Page 7 of 12

8 GAS L-R Page 8 of 12 F40211 Dishwasher

9 GAS R-L F40211 Dishwasher Page 9 of 12

10 STEAM L-R Page 10 of 12 F40211 Dishwasher

11 STEAM R-L F40211 Dishwasher Page 11 of 12

12 DISHWASHER SPECIFICATIONS: Meets requirements of A.S.S.E. Standard No DESIGN: Semi automatic, high or low temperature single-tank, rack-type dishwasher with flexible thermal layer curtains at the ends of chamber and between wash and final rinse zones. Insulated hinged inspection doors located in front of machine provide easy access to wash arms, rinse arms, strainer, strainer basket, and pump intake screen. Length of machine inside tank (at table connection) 66". Machine designed to clean and sanitize with hot water 160 F wash and 180 F (minimum) final rinse, or low temperature 130 F wash and 120 F final rinse and a chemical sanitizer. Water hardness recommended to be 3 gr. for best results. Automatic interlocks shut off pump and conveyor if door is opened when machine is in operation. CONSTRUCTION: Tanks, chambers, frame, legs, control box, doors, and all panels are constructed of stainless steel. PUMPS: The two recirculating stainless steel pumps and impellers with ceramic seat seals. Easily accessible pump assembly permits quick inspection. The pumps are self-draining. All piping distributing water to the upper and lower wash arms is stainless steel tubing. PUMP MOTORS: Built for Hobart 2 hp grease-packed ball bearings, splash proof, ventilated with manual, resettable inherent overload protection. Available in electrical specifications of /60/1, /60/3, 480/60/3 and 600/60/3. Also available, but not submitted for UL listing are /50/3 and /50/3. CONTROLS: A stainless steel control module with power and start/stop buttons is mounted on top of the machine. Machine control circuitry will be operated from a 120-volt control circuit transformer. Electrical components are completely wired with 105 C, 600V thermoplastic insulated wire with stranded conductors routed through UL listed electrical conduit or covered wire way. CONVEYOR: Rapid Return drive, designed for more even throughput of racks and allows for a 16-inch separation between the wash and the rinse zone. Racks conveyed automatically through wash and rinse zones and onto clean dish table. Ball Detent Clutch drive prevents damage to machine or racks, should movement of racks be obstructed. Rack tracks, conveyor structure, and drive units of stainless steel for " x " racks as standard. Conveyor speed: 5.6 FPM. DRIVE MOTOR: Built for Hobart, 1 6 horsepower gear motor, ventilated with manual, resettable inherent overload protection. Available in electrical specifications of /60/1, /60/3, 480/60/3 and 600/60/3. Also available, but not submitted for UL Listing are /50/3 and /50/3. POWER SCRAPPER: power scrapper is equipped with an upper and lower wash arm with specially shaped nozzles having large openings and arranged to effectively scrap all types of tableware. Power scrapper arms and end caps are easily removable for cleaning without use of tools. Removable perforated stainless steel strainer pans support a deep perforated stainless steel basket. Basket and strainer pans (3) can be removed without lower wash arm removal. POWER WASH: Wash tank is equipped with upper and lower stainless steel CFD Wash Arms which effectively direct water jets to all ware surfaces. Both upper and lower wash arms are selfaligning and have easily removable end caps for cleaning without use of tools. A removable perforated stainless steel strainer pan supports a deep perforated stainless steel basket. FINAL RINSE: Final rinse flow rate: 2.1 gpm,.62 gpr, 126-gph. Stainless steel upper and lower Auto Position Rinse Arms have single rows of nozzles. Racks entering the rinse zone automatically trigger rinse. Final rinse water line is equipped with a vacuum breaker downstream of an electrically operated solenoid valve in common piping system. Rinse agent and Low Temp Final Rinse Sanitizer agent (5.25% sodium hypochlorite bleach) dispenser injection ports provided in final rinse piping above chamber. Caution: Certain materials, including silver, aluminum, and pewter are attacked by sodium hypochlorite (bleach) in the chemical sanitizing dishwasher mode of operation. FILL: Fill water line is equipped with vacuum breaker on downstream side of electrically operated solenoid valve in common piping system, for automatic maintenance of tank level. DRAIN AND OVERFLOW: Large bell-type automatic overflow and drain valve inside power scrapper tank controlled from inside of machine. Power scrapper overflows to drain. Wash tank drain controlled from inside of the machine overflows to power scrapper through large internally mounted stainless steel tubing. Drain seals are large diameter high temperature o-rings. Drain automatically seats by closing inspection doors. Common drain utilizes a removable large diameter stainless steel tube sealed by rubber o-rings at each drain housing. Drain housing can be plumbed from load or unload end of machine. STANDARD EQUIPMENT: Digital display of power scrapper, wash and final rinse temperature. Positive low water protection for tank heat. Thermal Layered Curtains throughout machine are keyed to ensure proper placement. Drains are automatically closed when inspection doors are closed. Stainless steel adjustable feet. Bolted stainless steel enclosure panels around perimeter and underneath machine. Automatic tank fill. Door interlocks. Auto-timer. Vent fan and booster heater controls. Single point electrical connection. Low temperature alerts. Service diagnostics. Dirty water indicator. Delime notification. Conveyor dwell. Energy Saver Mode. NAFEM Data Protocol compliant. WASH TANK HEATING SELECTIONS (must choose one): ELECTRIC: One electric Incoloy sheathed immersion heater (15 KW) removable from inside tank. Tank water temperature is controlled by microprocessor controlled thermostat with positive low-water protection and magnetic contactor. (Disconnect switches not furnished.) A high limit device mounted on the surface of the tank additionally protects heating element. STEAM: One-inch stainless steel steam coil. Tank water temperature controlled by microprocessor controlled thermostat with positive low-water protection. Steam supplied to machine through high temperature steam solenoid valve and line strainer. GAS: Regulated infrared immersion tube gas burner system. Microprocessor controlled thermostat and a blower with a pressure switch control tank water temperature. Positive low water protection is provided. A high limit device mounted on the surface of the tube additionally protects immersion tube. A solid-state igniter board controls the gas valve and provides flame ignition. A transformer steps the control circuit voltage down from 120 volts to 24 volts to power the igniter board and gas valve. For natural gas, gas pressure to burner (customer connection) not to exceed 7" W.C. For LP gas, gas pressure to burner (customer connection) not to exceed 11" W.C. If gas pressure is higher than 7" W.C. natural or 11" W.C. LP pressure regulating valve must be supplied (by others) in the gas line to the dishwasher. OPTIONAL EQUIPMENT AT EXTRA COST: Stainless steel pressureless booster heater. Stainless steel vent hoods with vent stack and locking-type damper. Higher than standard chamber. Side loaders and unloaders. Floor mounted steam booster " x " peg, combination and miscellaneous racks. Table limit switch. Drain water tempering kit. As continued product improvement is a policy of Hobart, specifications are subject to change without notice. Page 12 of 12 F40211 (REV. 10/14) F40211 Dishwasher LITHO IN U.S.A. (H-01)