CROSS TRAINING MAGNETIC RECUMBENT BIKE
|
|
- Deborah Nicholson
- 6 years ago
- Views:
Transcription
1 CROSS TRAINING MAGNETIC RECUMBENT BIKE SF-RB4708 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
2 IMPORTANT SAFETY NOTICE Note the following precaution before assembling and operating the machine. 1. Assemble the machine exactly as described in the instruction manual. 2. Check all the bolts, nuts and other connections before using the machine for the first time to ensure the machine is in the safe condition. 3. Set up the machine in a dry level place and keep it away from moisture and water. 4. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the machine in the area of assembly to avoid dirt. 5. Before beginning exercise, remove all objects within a radius of 4 feet from the machine. 6. Do not use aggressive cleaning articles to clean the machine. Only use the supplied tools or suitable tools of your own to assemble the machine or repair any parts of machine. Remove drops of sweat from the machine immediately after finishing training. 7. Your health can be affected by incorrect or excessive training. Consult a doctor before beginning the training program. This machine is not suitable for therapeutic purpose. 8. Only use the elliptical when it is working correctly. Use only original spare parts for any necessary repairs. 9. This machine can be used by one person at a time. 10. Wear training clothes and shoes that are suitable for fitness training with the machine. Do not wear clothing that could get tangled in the machine. 11. If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop training and consult a doctor immediately. 12. This elliptical is intended for adult use only. Keep children away from the elliptical. 13. Do not put fingers or objects in the moving parts of the machine. 14.Maximum user s weight is 350 LBS. WARNING: This product can expose you to one or more chemicals known to the State of California to cause cancer and birth defects or reproductive harm. For more information go to 1
3 EXPLODED DIAGRAM 2
4 HARDWARE DRAWING & TOOLS Most of the listed assembly hardware have been packaged separately, but some hardware parts have been preassembled. In these instances, simply remove and reinstall the hardware as required. 3
5 PARTS LIST NO. DESCRIPTION QTY NO. DESCRIPTION QTY 1 Main frame 1 37 Back rest 1 2 Seat tube 1 38 Cross pan head screw 4 3L/R Swing tube 1.pr 39 Flat washer D13*2*Ф Slide rail 1 40L/R Crank 1.pr 5L/R Handlebar 1.pr 41 Cap S Front stabilizer 1 42 Cap S Rear stabilizer 1 43 Sensor wire 1 8 Adjustment Handle 1 44 Hex bolt M8* Square neck bolt M8*L73*120* Square plug 60*30* Connecting board 2 46 Cross pan head screw ST4.2* Ball cap nut M Alloy bushing Arc washer Ф 8.2*2*Ф 19*R Nylon nut M Computer tube 4 49 Extension wire Hex pan head screw M8* Hex pan head screw M8* Washer D8*1.5*Ф Spring washer 2 16 Spring stop collar D Flat washer D8*Ф 30* Spring stop collar D Axle glove 6 18 Eccentric gear 1 54 Wave washer 2 19 Axle 1 55 Plug 4 20 Small alloy bushing 1 56 Plug 1 21 Big alloy bushing 1 57 Long axle 1 22 Hex socket cap screw M6* Square bolt M8* Located handlebar glove 1 59 Arc washer Ф 20*d8.5dR Simple bearing 2 60 Pulse wire 2 25 End cap 2 61 Foam grip 2 26 End cap 2 62 Cross screw M6* L/R Pedal 1.pr 63 Fixed bracket 1 28 Adjusting pad 1 64 Hex screw M8* Alloy bushing Extension wire Spacer 2 66 Sensor wire 1 31 Computer 1 67 Nylon nut M Square plug 2 68 Alloy bushing 2 33 Square plug 2 69 Round end cap 1 34 Bushing 2 70 Round end cap 4 35 Block 1 71 Flat washer 4 36 Seat 1 4
6 ASSEMBLY INSTRUCTION STEP 1 1. Attach the Front Stabilizer (6) and the Rear Stabilizer (7) to the Main Frame (1) with the Square Neck Bolts (9), Arc Washers (12) and Ball Cap Nuts (11). 2. Attach the Adjustable Pad (28) to the Main Frame (1). STEP 2 1. Attach the Slide Rail (4) to the Main Frame (1) with Hex Pan Head Screws (14), Washers (15). 2. Attach the Adjustment Handle (8) to the Axle (19), and lock them with Hex Socket Cap Screws (22). 5
7 STEP 3 1. Attach the Seat Rest (37) to the Seat Tube (2) with Hex Pan Head Screws (14) and Washers (15). 2. Attach the Seat (36) to the Seat Tube (2) with Hex Pan Head Screws (14) and Washers (15). STEP 4 1. Attach the Swing Tube (3L/R) to the Main Frame (1) with Hex Pan Head Screws (50), Spring Washers (51), Flat Washers (52), Wave Washers (54) and Long Axle (57). 2. Attach the Connecting Board (10) to the Crank (40L/R) with Pedal (27L/R), Simple Bearings (24), Alloy Bushings 2 (29), Spacers (30) and Flat Washers (39). NOTE: Make sure to attach Right Pedal, marked (R), to the Right Crank (R). It should be tightened clockwise. Attach the Left Pedal, marked (L), to the Left Crank (L). It should be tightened counterclockwise. Attaching the Pedal to the wrong Crank or turning it the wrong direction will damage the Crank. 6
8 STEP 5 1. Attach the Handlebar (5L/R) to the Swing Tube (3L/R) with Square Bolts (58), Arc Washers (59) and Ball Cap Nuts (11). Connect the Pulse Wire (60) with Extension Wire (49). 2. Lift up the Computer Tube (13), and lock the Hex Screw (64) to the Fixed bracket (63) by the bottom holes of the Computer Tube (13). 3. Connect the Extension Wire (65), Sensor Wire (66) with the wires of the Computer (31). Lock the Computer (31) to the Computer Tube (13) with Cross Pan Head Screws (38) and Flat Washers (71). Assembly is now complete! 7
9 Adjusting the Saddle Position To move the saddle forward or backward, while seated on the bike, pull the Adjustment Handle (8) towards you. Move the saddle. Push the Adjustment Handle (8) forward to secure. Adjusting the Level If the bike is not level, adjust the End Caps (26). 8
10 Moving the Bike Lift the bike by the Rear Stabilizer (7) until the wheels on the Front Stabilizer (6) touch the floor. Now you can move the bike. 9
11 EXERCISE COMPUTER INSTRUCTIONS BUTTONS 1. MODE i. Press this button to change display or choose the window needs to be set. ii. In monitor status, hold this button for 3 seconds to reset all value to zero. 2. SET iii. To set value of Time, Distance, Calorie and Pulse when not in scan mode 3. RESET iv. Press to reset Time, Distance, Calorie and Pulse. v. In monitor status, hold this button for 3 seconds to reset all values to zero. FUNCTIONS 1.SCAN i:press MODE button until SCAN appears, and computer will rotate through all 6 functions: Time, Calorie, Speed, Distance,Total Distance and Pulse. Each will be displayed for 6 seconds. 2.SPEED(SPD) Displays speed, range is 0.0~999.9 Mile/H. 3.TIME(TMR) Counts the total time from exercise start to the end, range is 0 ~ 99 Minute 4.DISTANCE(DST) Counts the total distance from exercise start to the end and the range is 0.0 ~ 999.9Mile. 5. CALORIES(CAL) Counts the total calories consumed from exercise start to the end, range is 0.0 ~ KCAL. 6. TOTAL DISTANCE(ODO) Count the total distance since installing the batteries. 7. PULSE Hold the pulse sensors to read your heart rate per minute. The range is 40 ~ 240bpm. 8.AUTO START/STOP ALARM Computer will turn on when you press any key or start exercise. After 4 minutes in inactivity, computer will turn off. The functions of Time, Distance and Calorie can be set to countdown. When the countdown value goes to zero, the computer will alarm for 6 seconds. Press MODE to select the function, then press SET to adjust the value. Start pedaling to start the countdown. OPERATION PULSE RATE Remark: During the process of pulse measurement, the measurement value may be higher during the first 2~3 seconds, then will return to normal level. The measurement value cannot be regarded as the basis of medical treatment. This meter use 2 AA batteries. If there is a problem with the display, try changing the batteries. When changing the batteries, change both of them. Do not mix battery types or old and new batteries. Dispose of batteries according to your regional guidelines. 10
12 SPECIFICATIONS FUNCTION Auto Scan Running Time Current Speed Trip Distance Calories Every 6seconds 00:00~ 99:00(Minute: Second) The max pick-up signal is MILE/H 0.0 ~ MILE 0 ~ Kcal Total Distance 0 ~ 9999 MILE Pulse Rate BPM Battery Type 2 pcs of SIZE-AAAand UM-4 Operating Temperature 0 ~ +40 (32 ~ 104 ) Storage Temperature -10 ~ +60 (14 ~ 140 ) 11 Version 1.1
Elliptical Stepper Bike (100942)
Elliptical Stepper Bike (1009) IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference IMPORTANT SAFETY INFORMATION We thank you for choosing our
More informationPink Magnetic Elliptical Bike
Pink Magnetic Elliptical Bike Model No. P8300 IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE. For Customer Service, please contact: support@sunnyhealthfitness.com IMPORTANT SAFETY INFORMATION
More informationMAGNETIC ELLIPTICAL TRAINER SF-E3416 USER MANUAL
MAGNETIC ELLIPTICAL TRAINER SF-E3416 USER MANUAL IMPORTANT: Please read this manual carefully before using the product. Retain owner s manual for future reference. For Customer Service, please contact:
More informationMAGNETIC ELLIPTICAL TRAINER
MAGNETIC ELLIPTICAL TRAINER SF-E3609 USER MANUAL IMPORTANT: Please read this manual carefully before using the product. Retain owner s manual for future reference. For Customer Service, please contact:
More informationPINK MAGNETIC RECUMBENT BIKE
PINK MAGNETIC RECUMBENT BIKE P8400 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL
More informationMAGNETIC ROWING MACHINE SF-RW5634 USER MANUAL
MAGNETIC ROWING MACHINE SF-RW634 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
More informationIndoor Cycling Exercise Bike
Indoor Cycling Exercise Bike Model No. P8100 & SF-B1203 IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE. For Customer Service, please contact: support@sunnyhealthfitness.com IMPORTANT
More informationDUAL FUNCTION MAGNETIC ROWING MACHINE
DUAL FUNCTION MAGNETIC ROWING MACHINE SF-RW5622 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT
More informationMAGNETIC ROWING MACHINE SF-RW5515 USER MANUAL
MAGNETIC ROWING MACHINE SF-RW5515 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
More informationMAGNETIC UPRIGHT BIKE WITH TABLET HOLDER SF-B2511H USER MANUAL
MAGNETIC UPRIGHT BIKE WITH TABLET HOLDER SF-B2511H USER MANUAL IMPORTANT: Please read this manual carefully before using the product. Retain owner s manual for future reference. For Customer Service, please
More informationELASTIC CORD ROWING MACHINE SF-RW5606 USER MANUAL
ELASTIC CORD ROWING MACHINE SF-RW5606 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact:
More informationMAG Rowing Machine. Art No. GK713. Owner s Manual
MAG Rowing Machine Art No. GK713 Owner s Manual Safety Instructions To ensure the best safety of the exerciser, regularly check it on damages and worn parts. If you pass on this exerciser to another person
More informationMAGNETIC ELLIPTICAL TRAINER
MAGNETIC ELLIPTICAL TRAINER SF-RW5864 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL
More informationDUAL FUNCTION ROWING MACHINE SF-RW5612 USER MANUAL
DUAL FUNCTION ROWING MACHINE SF-RW5612 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL
More informationR-1 ROWING MACHINE OWNER S MANUAL
R-1 ROWING MACHINE OWNER S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner s manual for future
More informationFULL MOTION MAGNETIC ROWING MACHINE SF-RW5624 USER MANUAL
FULL MOTION MAGNETIC ROWING MACHINE SF-RW5624 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please
More informationFront Drive Elliptical Model No: E750
BODY WORX Front Drive Elliptical Model No: E750 Retain this owner s manual for future reference Read and follow all instructions in this owner s manual Version A 1 Safety Instructions To ensure the best
More informationSafety Instructions. Do not work out immediately after meals!
Safety Instructions To ensure the best safety of the exerciser, regularly check it for damage and worn parts. If you pass on this exerciser to another person or if you allow another person to use it, make
More informationUSER S MANUAL Taurus Racing Bike Z9 Pro TF-Z9-PRO
USER S MANUAL Taurus Racing Bike Z9 Pro TF-Z9-PRO 1 Safety Instructions To ensure the best safety of the exerciser, regularly check it on damages and worn parts. If you pass on this exerciser to another
More informationIRONMAN Recumbent Bike with Bluetooth
OWNER S MANUAL IRONMAN Recumbent Bike with Bluetooth Model 6155 The specifications of this product may vary from this photo and are subject to change without notice. IRONMAN, IRONMAN TRIATHLON and M-DOT
More informationERG400 ROWER OWNER S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW ROWER
ERG400 ROWER OWNER S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW ROWER Congratulations On Your New Rower and Welcome to the XTERRA Fitness Family! Table Of Contents XTERRA
More informationIronman X- Class 410 Recumbent Bike with Bluetooth
OWNER S MANUAL Ironman X- Class 410 Recumbent Bike with Bluetooth Model 6152 The specifications of this product may vary from this photo and are subject to change without notice. IRONMAN, IRONMAN TRIATHLON
More informationOperator and Parts Manual Nu-1600 Burnisher, Belt Drive Nu-2000 Burnisher, Belt Drive
Operator and Parts Manual Nu-1600 Burnisher, Belt Drive Nu-2000 Burnisher, Belt Drive NuSource Enterprises, LLC; A 4699 61 st St. Suite C; Holland, MI 49423 Length 33.75 in. Width 21 in. Height 50 in.
More informationEZ STRIDE MOTORIZED ELLIPTICAL
EZ STRIDE MOTORIZED ELLIPTICAL SF-E3626 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN
More informationDeluxe Welding Tool Chest
Deluxe Welding Tool Chest Item# 9002166 OPERATOR S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety
More informationOperator s Manual. Stripping Solution Applicator
Operator s Manual Stripping Solution Applicator Record this Important Information Date of Purchase Purchased From Address City State Zip Phone Contact Serial Number Emergency Contacts Medical Emergency
More informationGroup Exercise Lifecycle Bike Base GEC-ALLLX-02
Group Exercise Lifecycle Bike Base GEC-ALLLX-0 Parts Manual /9/07 5:53:9 PM GEC-ALLLX-0 - GROUP EXERCISE Table of Contents Base Electronics...3 Cable Management... Drive System - Drive Belt, Crankshaft,
More informationMulti-Angle Utility Bench
Multi-Angle Utility Bench MPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product may vary from this photo
More informationHEAVY-DUTY WELDING CART USER S MANUAL
HEAVY-DUTY WELDING CART USER S MANUAL WARNING: Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions
More informationAUTO OPEN SERIES CLAM/HOVER PRESS OPERATOR S MANUAL
AUTO OPEN SERIES CLAM/HOVER PRESS OPERATOR S MANUAL HOTRONIX CLAM PRESS Safety Instructions When using your heat press, basic precautions should always be followed, including the following: 1. Read all
More informationSC250X FLOOR GRINDER OPERATIONS MANUAL
Unit 4/1 Rocklea Drive Port Melbourne Vic 3207 1300 109 108 www.traxxcp.com.au SC250X FLOOR GRINDER OPERATIONS MANUAL The contents of this Operations Manual are the copyright of the publisher and may not
More informationDEUTSCH Bio-Master Bio-Max
DEUTSCH D 8217-3029-02 Bio-Master Bio-Max SVENSKA S 4. 2. 1. 3. 4. 5. 3 S SVENSKA 7. 6. 8. 9. 10. 4 SVENSKA S 11. 12. 4. 13. 4. 15. 14. 5 GB ENGLISH SAFETY PRECAUTIONS GENERAL This symbol means WARNING.
More informationHeater with Air Conditioning. E-Series Ford Aeromaster
Service Guide Heater with Air Conditioning E-Series Ford Aeromaster Contents Blower Motor...2 Plenum Removal...3 Control Module...6 Servo Motors...8 Coolant Valve and Servo Motor...8 Evaporator Recirculation
More informationTRW-17 READ PRIOR TO UNPACKAGING COMPONENTS
Rotary Woofer Setup & Installation Guide for the Eminent Technology Model TRW-17 READ PRIOR TO UNPACKAGING COMPONENTS Contents: 1) Removing Rotary Woofer Stand (optional) from Shipping Crate 2) Removing
More informationVIPER VENOM HIGH SPEEDS OWNERS MANUAL. IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! VN1500 SERIAL# MODEL#
VIPER VENOM HIGH SPEEDS www.usviper.com OWNERS MANUAL IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! MODEL# VN1500 SERIAL# VIPER...exceptional value REV.06(2014-9)
More information4 TON HYDRAULIC FLOOR PRESS INSTRUCTION MANUEL
4 TON HYDRAULIC FLOOR PRESS INSTRUCTION MANUEL Make sure read and fully understand the instruction manual before using the product IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS
More informationPANEL FAN SERIES OPERATORS MANUAL (Galvanized and Polymer)
PANEL FAN SERIES OPERATORS MANUAL (Galvanized and Polymer) Galvanized Panel Fan IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before attempting to assemble, install, operate
More informationSuperKlean Washdown Products
DURAREEL DR8 & DR8S INSTALLATION AND MAINTENANCE INSTRUCTIONS **DO NOT THROW AWAY AFTER INSTALLATION** **SAVE AND DISPLAY PROMINENTLY WHERE THIS EQUIPMENT IS USED** GENERAL WARNINGS High pressure and hot
More informationNilfisk Inc Winnetka Avenue North Minneapolis, MN REV.03( ) VF80189
Nilfisk Inc. 9435 Winnetka Avenue North Minneapolis, MN 55445 www.usviper.com REV.03(05-) VF8089 SAFETY PRECAUTIONS This machine is intended for commercial use. It is constructed for use in an indoor
More informationATTENTION TROUBLESHOOTING. Before using. Preparation. How to Operate. Other materials CONTENT OTHER MATERIALS
CONTENT OTHER MATERIALS TROUBLESHOOTING Before using Name of Parts...2 S.N Fault How to solve the problem How to Use the Power Switch...2 Preparation Assembly Drawing of Electrically Operated Running Machine...3
More informationMTC-Series Manual Trash Compactors Instruction Manual
Vestil Manufacturing Co. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 Website: www.vestilmfg.com e-mail: info@vestil.com
More informationDIGITAL CAP THE MAXX PRESS OPERATOR S MANUAL
DIGITAL CAP OPERATOR S MANUAL HOTRONIX Safety Instructions When using your heat press, basic precautions should always be followed, including the following: 1. Read all instructions. 2. Use heat press
More informationCREWMAN 20 ORB CREWMAN 28 ORB
E88066-00 E88068-00 E88070-00 CREWMAN 20 ORB CREWMAN 28 ORB 20, 28 Orbital Strip Machines Operator and Parts Manual 400 Van Camp Road Bowling Green, Ohio 43402 Customer Service: 888-GO-BETCO Fax: 800-445-5056
More informationParts and Service Manual
Section II Parts and Service Manual (70241A) CLARKE TECHNOLOGY Operator's Manual - MINI MAX Page -29- Frame and Front Cover Assembly Drawing 2/01 Page -30- CLARKE TECHNOLOGY Operator's Manual -MINI MAX
More informationOWNER S MANUAL IMPORTANT: READ OWNER S MANUAL CAREFULLY
Floor Burnisher OWNER S MANUAL IMPORTANT: READ OWNER S MANUAL CAREFULLY Please fill out and return your warranty card MODEL 261120 031811 TABLE OF CONTENTS CONGRATULATIONS on your purchase of a Global
More informationDIGITAL CLAM THE MAXX PRESS OPERATOR S MANUAL. Available models: MAXX Clam 11" x 15", 16" x 16", 16" x 20" (shown)
DIGITAL CLAM OPERATOR S MANUAL Available models: MAXX Clam 11" x 15", 16" x 16", 16" x 20" (shown) HOTRONIX Safety Instructions When using your heat press, basic precautions should always be followed,
More informationFES - Series Portable Electric Heaters. YES - Series Suspended Electric Heaters CONTENTS
FOSTORIA INDUSTRIES, INC. A DIVISION OF FES - Series Portable Electric Heaters YES - Series Suspended Electric Heaters (FES-1524-3E shown) IMPORTANT SAFETY INFORMATION INSIDE Serious injury or death possible.
More informationOperator s Manual MODEL 400A Hydra-Lift, 60, Air Power Lift & Manual Tilt. for Morse Hydra-Lift Drum Karrier Model 400A
Contents Page Receiving Procedures................. 1 Warranty............................... 1 Safety Information..................... 1-2 Machine Description................... 3-4 Operating Instructions...................
More informationSection - A Vacuum Feed Attachment
Tray Box Former 1.0 Section - A Vacuum Feed Attachment A-1 Table of Contents SECTION NO. PAGE SECTION NO. PAGE A.0 INTRODUCTION PURPOSE... A-3 A.1 SET-UP AND ADJUSTMENTS FIGURE A-1 VACUUM FEED MOUNTING
More informationIMAGE V. Parts and Service Manual
IMAGE 0V Section II Parts and Service Manual (88B) CLARKE TECHNOLOGY Image Operator's Manual Page AUTHORIZED PERSONNEL MAINTENANCE To Access Pump Motor. Remove brush housing from machine. See "Brush Motor
More informationTABLE OF CONTENTS
TABLE OF CONTENTS Safety Precautions Machine Operation Machine Maintenance & Storage Handle Release Assembly Instructions Parts Lists Wiring Diagram Warranty Policy 3 4 4 5 6-10 11 12-2- SAFETY PRECAUTIONS!!!
More informationPREMIER SERIES BY P1255RBL-18 P2339RBL-18
PREMIER SERIES BY P1255RBL-18 P2339RBL-18 P2339RBL-18 P1255RBL-18 P2339RBL- P1255RB- P2339RBL- 1. P2339RBL 18 Machine casting components Line Part Number Description Qt. Notes 1 300 1002 Machine
More informationHIGH SPEED BURNISHER OWNERS MANUAL
HIGH SPEED BURNISHER OWNERS MANUAL IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! MODEL# TP1500 SERIAL# REV.00(09-08) VF53023TP TABLE OF CONTENTS Safety Precautions
More information99105A Series - F Brush Lift Assembly Model :99105A 20" EZ BD Floorkeeper (w/ 2-12 V Batteries) - Series F
9905A Series - F Brush Lift Assembly Model :9905A 0" EZ BD Floorkeeper (w/ - V Batteries) - Series F Page- 5 7 8 9 5 7 8 0 5 7 8 9 0 5 7 8 9 0 0589 NUT, LOCK W/ LOCTITE 070 RING, RETAINING 0 WASHER, PLAIN
More informationCOOLING SYSTEM 1. Section V CONTENTS DATA AND SPECIFICATIONS. Page. Fluid Fan Drive (Silent Flite) 3. Water Pump 4. Radiator 5
Section V COOLING SYSTEM CONTENTS Fluid Fan Drive (Silent Flite) 3 Water Pump 4 Radiator 5 Water Temperature Gauge 6 Thermostat 7 Radiator Pressure Cap 7 Service Diagnosis 7 DATA AND SPECIFICATIONS COOLING
More informationMarley X7 Fan USER MANUAL DESIGNED FOR INDUCED-DRAFT COOLING TOWER APPLICATIONS
USER MANUAL Marley X7 Fan DESIGNED FOR INDUCED-DRAFT COOLING TOWER APPLICATIONS M2010-1234A ISSUED 3/2012 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. Fan Components 1
More informationOWNER'S MANUAL IMPORTANT: READ OWNER'S MANUAL CAREFULLY MODEL : CHEETAH DC2000 FOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL:
OWNER'S MANUAL IMPORTANT: READ OWNER'S MANUAL CAREFULLY MODEL : CHEETAH DC2000 FOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL: SERIAL NUMBER:-------- DATE PURCHASED: PURCHASED FROM:
More informationOperating Instructions
Operating Instructions Varioset Standard After-sales service For after-sales service please contact the Veit representative in your country. GmbH & Co. Justus - von - Liebig - Str. 15 D - 86899 Landsberg
More information3HP MOBILE CYCLONE DUST COLLECTOR MANUAL FILTER CLEANING MANUAL
3HP MOBILE CYCLONE DUST COLLECTOR MANUAL FILTER CLEANING MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA
More informationOperator s Manual for Morse Hydra-Lift Drum Karrier
Contents Page Receiving Procedures................. 1 Warranty............................... 1 Safety Information..................... 1-2 Machine Description................... 3-4 Operating Instructions...................
More information57" Fiberglass Exhaust Fan with Cone
OPERATORS MANUAL Fiberglass Exhaust Fan IMPORTANT: READ AND SAVE THESE INSTRUCTIONS Read all instructions carefully before attempting to assemble, install, operate or service the product described. Failure
More informationAltra Series Dampener
Crestline TM Altra Series Dampener Installation Instructions Heidelberg MO X88-66 10/97 Rev-A GENERAL INFORMATION ATTENTION CRESTLINE ALTRA SERIES TM DAMPENER OWNER! Accel Graphic Systems provides parts
More informationElectronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
More informationSD2000 FLOOR BURNISHER
SD2000 FLOOR BURNISHER OPERATION & PARTS MANUAL REV A April 2003 SPECIFICATIONS Length: 33.75 inches Width: 2 inches Height: 50 inches Weight: 69 pounds Pad Speed: 2000 Pad Diameter: 20 inches Drive Motor:.5
More information20 TON AIR/MANUAL SHOP PRESS
20 TON AIR/MANUAL SHOP PRESS Instruction Manual 1 Please read this instruction manual carefully before use. IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS N WARNINGS.
More informationFull Size Canister Service Manual Riccar Models 1700 / 1800 Power Nozzles RPB-100 / RPB-220 / RPB-224 / RPB-250
Full Size Canister Service Manual Riccar Models 1700 / 1800 Power Nozzles RPB-100 / RPB-220 / RPB-224 / RPB-250 Table of Contents I. General Full Size Canister Issues...2 A. Full Bag Indicator...2 1. General
More information20 Automatic Scrubber with Brush Assist
E87030-00 E88062-00 STEALTH ASD20B 20 Automatic Scrubber with Brush Assist Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical
More information14 Upright Vacuum with HEPA Filter & Dual Power
E29990-00 14 Upright Vacuum with HEPA Filter & Dual Power Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954
More information7165 Dust Collector Owner s Manual
7165 Dust Collector Owner s Manual Oliver Machinery M-7165 12/2016 Seattle, WA Copyright 2003-2017 info@olivermachinery.net www.olivermachinery.net CONTENTS IMPORTANT SAFETY RULES----------------------------------------------------------------
More informationPole Mounting System Installation & Certification Manual
Pole Mounting System Installation & Certification Manual IronRidge Pole Mount Installation Guide... 2 IronRidge Certification Letter... 17 IronRidge Wet Stamped Drawing... 18 IronRidge Foundation Addendum...
More informationTornado Operations & Maintenance Manual
TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com Tornado Operations & Maintenance Manual MODEL NO. 99690 BD 22/14, 99720 BD 26/14 L9722
More informationPower sweeper 2+2. Operating instructions
GB Power sweeper 2+2 Operating instructions Congratulations on your new sweeper! Description Dear Customer For your convenience, a description of the machine is provided on the following pages. Technical
More informationRC-54CA RO-50CA RC-54HA RO-50HA. SPLIT TYPE AIR CONDITIONER CASSETTE TYPE (50Hz) Indoor unit Outdoor unit
SPLIT TYPE AIR CONDITIONER CASSETTE TYPE (50Hz) Indoor unit Outdoor unit RCW-54CB RO-50CA RC-54CA RO-50CA RC-54HA RO-50HA CONTENTS SPECIFICATIONS OUTLINE AND DIMENTIONS CIRCUIT DIAGRAM REFRIGERANT SYSTEM
More informationBR3570 REVERSIBLE HYDRAULIC PLATE COMPACTOR PARTS BOOK
BARTELL MORRISON INC. 375 Annagem Blvd., Mississauga, ON L5T 3A7 Telephone: 1-647-953-4100 Fax: 1-647-953-4101 BR3570 REVERSIBLE HYDRAULIC PLATE COMPACTOR www.bartellglobal.com Doc. # Orig. Rel. 10/2013
More informationMANUAL SWEEPER GUIDE. Model 920. Please make sure you read the instruction manual below and clear the operation before you use this sweeper.
MANUAL SWEEPER GUIDE Model 920 Please make sure you read the instruction manual below and clear the operation before you use this sweeper. SPECIFICATION HOW TO USE Working width with two side brushes 920
More informationFloating Pond Pump System 1/2, 3/4 & 1 HP 230V Models FPS05021, FPS07021, FPS10021
Operating Instructions & Parts Manual Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others
More informationrev3 INSTALLATION & OPERATION MANUAL OIL CIRCULATING HEATING SYSTEM MODEL OSM
216279-000 rev3 INSTALLATION & OPERATION MANUAL OIL CIRCULATING HEATING SYSTEM MODEL OSM IDENTIFYING YOUR SYSTEM IOM216279-000 The HOTSTART heating system is designed to heat fluids for use in marine
More informationHIGH SPEED BURNISHER VF53023CP rev.01 ( ) MODE D L E # CPL C 1500H 0 S SERI R AL A #
MODEL# CPL1500HS SERIAL# TABLE OF CONTENTS Safety Precautions Machine Operation Machine Maintenance & Storage Handle Release Assembly Instructions Parts List Wiring Diagram 3 4 4 5 6-10 11 2 SAFETY PRECAUTIONS!!!
More information4NEK5 High Speed Burnisher TABLE OF CONTENTS
Operating Instructions Instructions & Parts & Parts Manual Manual 4NEK5 High Speed Burnisher TABLE OF CONTENTS Safety Precautions 3 Machine Operation 4 Machine Maintenance & Storage 4 Handle Release Assembly
More informationHanson LED C e i l i n g F a n
Hanson LED C e i l i n g F a n model no. 052-8398-2 Toll-free 1-866-827-4985 IMPORTANT: For your safety please read and understand this manual before installing or operating this product. OWNER S MANUAL
More informationVENOM HIGH SPEEDS OWNERS MANUAL. IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! VN1500 MODEL# SERIAL#
VIPER VEM HIGH SPEEDS www.usviper.com OWNERS MANUAL IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! MODEL# SERIAL# VN1500 VIPER RTH AMERICA P.O. BOX 104 HAMILTON, MI
More informationIMPORTANT SAFETY INFORMATION
OPERATION INSTALLATION PARTS MANUAL www.fostoriaindustries.com Made in U.S.A. ELECTRIC PORTABLE HEATER FES-1024-1CA 08860010 YES-1024-1CA 08861510 FES-1520-3A 08860110 YES-1520-3A 08860810 FES-1524-1A
More informationService Manual for X9.5 and Older Models
Service Manual for X9.5 and Older Models I. Common Issues... 2 A. Direct Air Motor... 2 A.1. Direct Air Motor will not run.... 2 A.2. Direct Air Motor is making a squealing sound.... 2 B. Full Bag Indicator
More informationBARRACUDA DUAL MOTOR VACUUM OWNERS MANUAL. IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! CUDA26 MODEL# SERIAL#
www.usviper.com BARRACUDA DUAL MOTOR VACUUM OWNERS MANUAL IMPORTANT: READ OWNERS MANUAL CAREFULLY Please fill out & return your warranty card! MODEL# SERIAL# CUDA26 VIPER NORTH AMERICA P.O. BOX 104 HAMILTON,
More informationUser s Manual and Operating Instructions
User s Manual and Operating Instructions Model Numbers: PT-18W-DDF-A, PT-20F-DDF-A, PT-20S-DDF, PT-24O-DDF, PT-24-DDF, PT-24-DDF-F, PT-30-DDF, PT-30P-DDF-A, PT-30P-DDF-AF READ AND SAVE THESE INSTRUCTIONS
More informationASD20B STEALTH. 20 Automatic Scrubber with Brush Assist. Operator and Parts Manual E E E
E87030-00 E88062-00 E29935-00 STEALTH ASD20B 20 Automatic Scrubber with Brush Assist Scan this QR code to view equipment page Operator and Parts Manual 400 Van Camp Road Bowling Green, Ohio 43402 Customer
More informationSpare Parts List (Kits) Model Ref.:- HM35 SERIES A Spare Parts List (Kits) Issue 8 Dated 10-February-2015 Reference Drawing 09-1108-0000 Issue B Dated 07-January 2014 Drawing Ref. Part Number DESCRIPTION
More information5HP CYCLONE DUST COLLECTOR MANUAL
5HP CYCLONE DUST COLLECTOR MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo are the registered trademarks
More informationOperation Manual DP2000
Operation Manual DP2000 Dual Heat Dough Press Doughpro Stearns Product Development Corp. 20281 Harvill Ave Perris, CA 92570 Phone (951) 657-0379 Toll Free (800) 624-6717 Fax (951) 657-4594 Website: www.doughpro.com
More informationAS20B CREWMAN. 20 Automatic Scrubber with Brush Assist. Operator Manual E E E
E83025-00 E29936-00 E29937-00 CREWMAN AS20B 20 Automatic Scrubber with Brush Assist Operator Manual 400 Van Camp Road Bowling Green, Ohio 43402 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical
More informationDELUXE OPERATIONAL MANUAL
DELUXE OPERATIONAL MANUAL Detail Plus Car Appearance Systems, Inc. P.O. Box 20755 Portland, Oregon 97294 TOLL-FREE: 1-800/284-0123 Phone (503) 251/2955 Fax (503) 251-5975 Website: www.detailplus.com Email:
More informationClosomat Lima Vita installation & user guide
Closomat Lima Vita installation & user guide design manufacture supply install service recycle Technical data The Closomat toilet MUST be installed by a competent or qualified person. Explanation of symbols
More informationGRASS CATCHER. Operator / Parts Manual 42" /
GRASS CATCHER Operator / Parts Manual 42" / 587412401 Please read the operator manual carefully and make sure you understand the instructions before using the machine. CONGRATULATIONS on the purchase of
More informationPME. Series Enclosures. Battery Enclosure (BE) Field Upgrade Installation Instructions. Effective: January, Alpha Technologies
PME Series Enclosures Battery Enclosure (BE) Field Upgrade Installation Instructions Effective: January, 2004 Alpha Technologies Power Alpha Technologies. Protecting The Power in Communications. Preface
More informationFYS-13 FYS-13L POWERFUL SHREDDER OWNER S MANUAL
FYS-13 FYS-13L POWERFUL SHREDDER OWNER S MANUAL 1 To operator: Thank you for buying Shredder Fys-13 and Fys-13 L. This owner s manual is considered a part of shredder and should be always with the shredder.
More informationKC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions
KC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions ASSEMBLY Unpack pump from carton and check for shipping damage. WARNING: Magnetic field hazard. This pump
More informationMSK-8900M Industrial Sewing Machine. Instruction Manual
MSK-8900M Industrial Sewing Machine Instruction Manual CONTENTS Operation instruction. Brief introduction. Main specifications. Main parts name 4. The method of installation 5 5. Pareparation before sewing
More informationRevised 9/05. Model X-750 Subassembly Parts List
Revised /0 Model Subassembly Parts List Blade Belt Tensioner 0 PART NUMBER DESCRIPTION QTY. -G0-0-0 SHSB, / x / -G0-0-0 SHSB, / x / -X-0-00 Arm, Belt Tensioner -G0-0-00 Washer, Flat /" -0-0-0 Washer, Split
More informationDirt Dragon. Operator and Parts Manual WOOD FLOOR CLEANING MACHINE
Dirt Dragon WOOD FLOOR CLEANING MACHINE Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 800-441-1934 Fax: 800-942-2007 Technical Service: 877-856-5954 www.basicoatings.com
More informationDRS21BT STEALTH. 21 MicroRider Automatic Scrubber. Operator Manual E E E
E29961-00 E29962-00 E29963-00 STEALTH DRS21BT 21 MicroRider Automatic Scrubber Operator Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service:
More information