PUMPS AND CONTROLS. Submittal #1 Pumps. Project Torrance Memorial Medical Center Storm Lift Sation Project #
|
|
- Sara Nash
- 6 years ago
- Views:
Transcription
1 PUMPS AND CONTROLS Submittal #1 Pumps Project Torrance Memorial Medical Center Storm Lift Sation Project # Owner Torrance Memorial Medical Center City of Torrance Contractor Bali Construction, Inc. Equipment Manufacturer ESSCO Pumps and Controls 4935 Telegraph Road L.A. CA (323) Job# 10091B
2 ESSCO Pumps & Controls 4935 Telegraph Rd. Los Angeles, Ca (323) Fax (323) Thursday, April 22, 2010 Submittal: Job No Ref: Torrance Memorial Medical Center Storm Lift Station Project # Two -ESSCO model torque fluid submersible vortex pump with a 100% recessed vortex style 7 vane impeller, dynamically balanced in two planes, capable of passing 2" diameter and long length solids. Each unit shall be constructed of heavy duty engineered Cast Iron with Ductile Iron impeller, Cast Iron volute, Cast Iron wear plate, assembled with Stainless Steel hardware. The pump shall be painted with standard factory paint. Each pump shall be equipped with a Cool Agivent device which shall vent the pump case, cool the motor and agitate the wet well. The Cool Agivent shall provide enough cooling to dissipate any excess heat generated by the motor in the event of prolonged operation with the motor exposed. Reliance 1 HP, 17 RPM, 115Volts/1Phase/60hz., 180TY frame, U.L. listed submersible explosion proof motor, rated Class 1, Division 1, Groups C & D for hazardous locations, with Buna-N O-rings, Carbon/Ceramic upper mechanical seal with Buna-N elastomers and Carbon/Ceramic lower mechanical seal with Buna-N elastomers, 416 Stainless Steel shaft, Class F insulation, oil buffer zone, moisture sensing probes, built-in thermal overload protection, 25 ft. motor leads, and ESSCO/Reliance five year warranty. The exterior of the motor shall be coated with standard factory paint. Approximate shipping weight: 300 lbs. Two -Hose fitting set consisting of (2) Plated Steel nipples, 10' of 2" hose and bolted hose clamps. Shipment: 8-10 week(s) upon receipt of written purchase order, approved submittal, and approved credit. As always, if I can be of further service please feel free to contact me. Respectfully, John L. Ivins
3 Reliable Long-Term Solutions For Your Toughest Pump Problems Municipal Raw Sewage Grit Handling Sludge Recirculation Digester Cleaning Thickened Sludge Storm Water Sump Pump (Pipe Gallery) Head Works STYLES Horizontal with Power Frame Horizontal Close Coupled Vertical with Power Frame Vertical Close Coupled Vertical Dry Pit with Submersible Motor Submersible Column SIZES 1 Thru 6 Vortex 3 Thru 12 Non-Clog Industrial Coal Wash Coal Pile Runoff Coal Slurry Citrus Waste Handling Sugar Waste Handling Leather Tannery Waste Rendering Plant Wash Down Clarifier Under Flow Stone Washed Jeans Industrial Laundries Automobile Shredding MATERIALS Cast Iron Stainless Steel Ni-Hard High Chrome Iron (HCI) 20+ Other Alloys U.L. LISTED CUSTOM CONTROL PANELS Air Bubbler Pressure Switch Air BubblerTransducer Float Switch Variable Speed Drive Systems Sonic Level Controllers Motor Control Centers PLC Controls Calibration Test Benches Custom NEMA Enclosures in Epoxy Coated Steel and Stainless Steel ESSCO Pumps & Controls 4935 Telegraph Rd Los Angeles, Ca (323) Fax (323) sales@esscopumps.com Member of the Hydraulic Institute Form: G-01a Distributed By:
4 FEATURES AND BENEFITS Features Benefits Recessed Impeller 5 Year Wear Warranty for recessed impeller pumps for Industrial and Municipal applications. Virtually no radial thrust loads on pump and motor bearings. The impeller is completely out of the liquid flow path which make it ideal for handling liquids that contain large diameter solids, long stringy solids or a combination of them. Whatever goes into the suction of the pump and is smaller that the discharge pipe diameter will come out. Substantial savings for replacement parts (no other pump company offers this). Can operate anywhere on the pump curve. Low flow and high heads, pumping solids. Wear Plates (behind the impeller) for Recessed Impeller and Non Clog Impeller pumps. Substantially longer life (3-4 times) on motor bracket and mechanical seals! Mechanical Seal Spring Protector Hard Irion Impellers that can be trimmer to a specific design point on the pump curve. No expensive mechanical seals. Protects the mechanical seal s spring from ragging up and premature failure. ESSCO offers Carbon Ceramic seal faces as well as Tungsten Carbide and Silicon Carbide as standard options. Eliminates the high cost of belt drives and VFD. ESSCO manufactures pumps in over 20 different alloys. The pumped media can be matched to a specific metallurgy that will provide extended life even in the most demanding applications. ESSCO Pumps & Controls 4935 Telegraph Rd. Los Angeles, Ca (323) Fax (323) Website: sales@esscopumps.com Member of the Hydraulic Institute Form: G-01a
5 EXPLOSION-PROOF SUBMERSIBLE SUMP PUMP ESSCO utilizes a single piece volute design with extra material in high wear areas. IMPELLER: ESSCO pumps are available with various impeller designs to allow for high capacity low head or low capacity high head applications. ESSCO utilizes investment cast impellers for higher casting density and thicker vanes and back shrouds which allow for maximum life. By use of the JLI manufacturing techniques ESSCO offers trimmed impellers in extremely hard and difficult to handle alloys. By use of this production technique, impellers can be machined to act as a shredder (for solids coming in contact with the eye of the impeller) or machined to handle solids more delicate in nature. ESSCO heavy duty submersible explosionproof sump pumps are of the 100% recessed impeller design. Each unit is capable of handling long stringy material, large size solids and slurries within maximum solids handling efficiency. The ESSCO pump incorporates the vortex pumping action along with unique pump design, allowing the greatest flexibility in the submersible pump field. VOLUTE: Each volute is engineered for maximum life in "sump pump" duties. WEAR PLATE: The ESSCO MODEL 252 comes standard with a wear plate located behind the impeller. The wear plate is designed to protect the motor bracket and mechanical seal from particle erosion. The wear plate can also act as a barrier for a seal flushing fluid when a simple wear plate is not sufficient protection against wear created by the pumped media. Again ESSCO utilizes the JLI production method for manufacturing this pump component to ensure the best possible casting quality and material density. COOL AGIVENT: Each ESSCO submersible pump includes a Cool Agivent apparatus which is for venting pump case and cooling external surface of the motor. This patented ESSCO Pumps & Controls Distributed By: 4935 Telegraph Rd. Los Angeles, Ca (323) Fax (323) sales@esscopumps.com
6 EXPLOSION-PROOF SUBMERSIBLE SUMP PUMP device will allow a more shallow wet well design, as well as keeping the motor cool when not submerged. All ESSCO submersible pumps are capable of running dry continuously. (consult factory for specific applications). MOTOR: ESSCO offers U.L. listed explosion- proof motors for Class 1, Division 1, group D hazardous locations. The motor is manufactured by Reliance Electric Co. and includes moisture detection and thermal protection as standard features. Heavy duty bearings and dual mechanical seals are standard for both motor designs and on special request high temperature and energy e f- ficient designs are available. (Not all motor options are available on U.L. listed motors.) In addition to the above listed standard items ESSCO offers the following options: ~ 316 S.S. motor shaft ~ Nitronic acid resistant stainless steel ~ Tungsten carbide lower mechanical seal with stainless steel metal components and Buna-N elastomer ~ Silicon carbide lower mechanical seal with stainless steel metal components and Viton elastomers ~ Mechanical seal flush ~ 316 S.S. motor mounting bracket ~ 2-part epoxy coating ~ Steel motor jacket ~ 316 S.S. motor jacket ~ Motor jacket flush connection (for cooling in hot liquid applications) ~ Viton motor "O" rings ~ Teflon coated Viton "O" rings OPTIONAL LIQUID END MATERIALS: ~ Ni Hard 5 Brn ~ Ni Hard 6+ Brn ~ HCI 5 Brn ~ HCI 6+ Brn ~ CD4MCu ~ 316 S.S. ~ 304 S.S. ~ Hastalloy ~ Alloy 20 ~ Navy Bronze ~ Other ADDITIONAL OPTIONS: ~ Certified Performance Test * ~ Certified Hydrostatic Test * ~ Certified Motor Test ~ Explosion-proof Slide Rail Assembly ~ U.L. Listed Control Panels * All tests are conducted as per Hydraulic Institute Standards. ESSCO maintains a large stock of complete pump units and spare parts for quick shipment. For special alloy parts ESSCO has a quick shipment program to ensure customer a minimum of down time. ESSCO Pumps & Controls 4935 Telegraph Rd. Los Angeles, Ca (323) Fax (323) Website: sales@esscopumps.com Member of the Hydraulic Institute Form: Tufsub Brochure
7 Pumps 4935 Telegraph Rd L.A., Ca FAX Pump Model: 252 Impeller No.: 10 RPM: 17 Sphere Size: 2" Type: Submersible Impeller Type: Vortex 7 Vane Impeller Dia: Condition Point: 0 GPM 0 TDH Condition Point: 0 GPM 0 TDH Condition Point: 0 GPM 0 TDH "- 7 Vanes.5 HP HP TDH in Feet "- 10 Vanes US GPM d:\data\xlcurves\252-4p Page 1 Curve Date 11/91
8
9
10 Plicord Versiflo 125 APPLICATION: For medium-duty water discharge service where the hose does not encounter severe handling. CONSTRUCTION: TUBE: Black Versigard synthetic rubber COVER: Black Versigard (wrapped finish) REINFORCEMENT: Spiral-plied synthetic fabric TEMPERATURE: -25 F to 180 F (-32 C to 82 C) PACKAGING: 100' lengths, coiled and polywrapped BRANDING: Continuous spiral brand example Goodyear Versiflo 125 Water Discharge. COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure. NON-STOCK/SIZES: Refer to page 300 for special production run minimum requirements. ORDER CODES: ID NOM. OD MAX. WP WEIGHT in. mm. in. mm. psi. Mpa. lb./ft. kg./m. 1 1/ / / The GOODYEAR (and Winged Foot Design) trademark is used by Veyance Technologies, Inc. under license from The Goodyear Tire & Rubber Company. Goodyear Engineered Products are manufactured and sourced exclusively by Veyance Technologies, Inc. or its affiliates Veyance Technologies, Inc. All Rights Reserved.
11 Shank Fittings King Combination Nipples Combination nipples are recommended for low-pressure discharge and suction service for compatible liquids. They are not for compressible products such as air or nitrogen on sizes 1¼" and above. King Combination Nipples are not recommended for steam. The working pressure may vary with the construction of the hose, the type of clamping system used and the application. Consult the factory for recommendations. In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1½ times the working pressure and held for fifteen minutes without leaking or coupling movement. For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook. NPT threaded end with knurled wrench grip Size ½" ¾" 1" 1¼" 1½" 2" Unplated Steel Opt Plated Steel Opt Brass Aluminum Opt Part # Price/E Qty Part # Price/E Qty Part # Price/E Part # Price/E Qty ST1 ST5 ST10 ST15 ST20 ST25 $ STC1 STC5 STC10 STC15 STC20 STC25 $ BST1 BST $ AST1 AST $ knurled wrench grip F Shank NPT threaded end no knurl Size ½" ¾" 1" 1¼" 1½" 2" 316 Stainless Brass Aluminum Opt Steel Opt Hastelloy Qty Qty Part # Price/E Part # Price/E Part # Price/E Part # Price/E - - BST10 BST15 BST20 BST25 * made from casting $ AST10 AST15 AST20 AST25 $ RST1 * RST5 * RST10 RST15 RST20 RST25 $ HST25 $ Size 2½" 3" 4" 5" 6" 8" 10" 12" Unplated Steel Opt Plated Steel Opt Brass Part # Price/E Qty Part # Price/E Qty Part # Price/E ST30 ST35 ST40 ST ST60 ST80 ST100 ST120 $ STC30 STC35 STC40 STC STC60 STC80 STC100 STC120 $ BST30 BST35 BST $ no knurl Size 2½" 3" 4" 5" 6" 8" Aluminum Opt 316 Stainless Steel Opt Hastelloy Part # Price/E Qty Part # Price/E Qty Part # Price/E AST30 AST35 AST40 AST AST60 - $ RST30 RST35 RST40 RST RST60 RST80 $ HST $ DPL
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Reliable Long-Term Solutions For Your Toughest Pump
Reliable Long-Term Solutions For Your Toughest Pump Municipal Raw Sewage Grit Handling Sludge Recirculation Digester Cleaning Thickened Sludge Storm Water Sump Pump (Pipe Gallery) Head Works Industrial
More informationFamily Curve. Submersible Grinder Pumps 1¼" and 2" Discharge. Effluent/Grinder Pumps.
Family Curve Submersible Grinder Pumps 1¼" and 2" Discharge 7 11/0 Submersible Vortex Grinder Pumps SGV, 2HP, Double Seal, Oil-Filled Word File FILE: SPEC4 SCOPE: Furnish and install submersible grinder
More informationKEENER GRINDER PUMPS
KEENER GRINDER PUMPS RDSGP1-2021-50Hz 2 HP Grinder Pump Replacement Grinder Pump Direct Interchangeability Double Mechanical Seal Silicon Carbide (Main) - Grit Resistant Carbon Ceramic (Secondary) Dual
More informationK4RB(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location)
Solids-Handling Pumps K4RB(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location) HIGH OPERATING PRESSURES Up to 275 Total Dynamic Head Strong Pumping Capacities to 1400
More informationFamily Curve. Submersible Grinder Pumps 1¼" and 3" Discharge. Effluent/Grinder Pumps.
Family Curve Submersible Grinder Pumps 1¼" and " Discharge 7 12/18 Specifications Submersible Vortex Grinder Pumps SGV, 2HP, Double Seal, Oil-Filled FILE: SPEC4 SCOPE: Furnish and install submersible grinder
More informationEBARA. Submersible Non-clog Pump Model DLFU Model DVFU Model DDLFU
EBARA Submersible Non-clog Pump Model DLFU Model DVFU Model DDLFU water wastewater EBARA International Corporation Standard Pump Division S ubmersible Non-clog Pump Model DLFU DVFU DDLFU Features Watertight
More informationKGP(X) Grinder Pumps HP Grinder Pump, 3 Phase (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve.
Grinder Pumps KGP(X) 7.5-15HP Grinder Pump, 3 Phase (Class 1, Div. 1, Groups C & D Hazardous Location) (PENDING) The KEEN PUMP KGP(X) series centrifugal grinder pumps are designed for municipal, commercial
More informationSubmersible A Series Wastewater Pumps AMX, AV and AK Hydraulic Ranges
Submersible A Series Wastewater Pumps AMX, AV and AK Hydraulic Ranges TM High Performance in Wastewater Pumping HOMA submersible water and wastewater pumps operate worldwide in numerous domestic, municipal
More informationDUPLEX CONDENSATE TANK SYSTEM
DUPLEX CONDENSATE TANK SYSTEM PROJECT NAME: 7 EAST 54TH STREET CONTRACTOR: PRO PUMP CORP ENGINEER: KEVAN WOODWORTH SUBMITTED BY: NISSIM ISAACSON DATE: 2.20.205 DESIGN DATA Model GPM TDH HP Volt Phase RPM
More informationK4RH(X) Solids-Handling Pumps
Solids-Handling Pumps K4RH(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location) RECESSED IMPELLER Handles Stringy and Fibrous Materials Passes Large Solids Pumps Heavier
More information4VH and 4VHX. 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction
4VH and 4VHX 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE Oil-filled motor for maximum heat dissipation
More informationDLKF. EBARA Submersible Sewage Pumps Specifications Project: Model: Chk d: Date:
DLKF A. General: Provide submersible sewage pumps suitable for continuous duty operation underwater without loss of watertight integrity to a depth of 65 feet. Pump system design shall include a guide
More informationHOMA Pump, Ansonia Connecticut
TM High Performance in HOMA began as a submersible motor manufacturer more than fifty years ago. We expanded into full pump production in the 1960s. Every product we design and manufacture has always exceeded
More informationOTHER BJM PRODUCTS SUBMERSIBLE PUMP CAPABILITIES. PERFECTA SERIES SLIDE RAILS CONTROL PANELS THE RIGHT PUMP FOR TOUGH JOBS
BJM PUMPS THE RIGHT PUMP FOR TOUGH JOBS Non-Metallic (NORYL) pump body for handling chemically aggressive liquids XP MOTORS FOR HAZARDOUS LOCATIONS FM approved Class I, Division 1 Groups C & D locations
More informationPOULTRY MARKET CATALOG
POULTRY MARKET CATALOG FW0134 0518 Supersedes 0714 Evaporative Cooling Pumps: 1-1/2 or 2 in. discharge Centrifugal Booster Pumps Pressure Booster Pumps Engineered Poultry Pumping Systems One year limited
More informationOTHER BJM PRODUCTS SUBMERSIBLE PUMP CAPABILITIES PERFECTA SERIES SLIDE RAILS CONTROL PANELS. THE RIGHT PUMP FOR TOUGH JOBS
PERFECTA SERIES Pumps liquids to 135 F (57 C) Oil filled motor SLIDE RAILS 2 through 6 slide rail assemblies BJM adapters to fit others or existing slide rail systems Flows to 900 GPM (3400 L / Min) Solids
More informationGoulds Trash Hog. Self-Priming Solids Handling Pumps
Goulds Trash Hog Self-Priming Solids Handling Pumps Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6000 GPM (1363 m 3 /h) Heads to 140 feet (43 m) Temperatures
More informationSELF-PRIMING PUMPS CORNELL PUMP COMPANY STX & STL SERIES INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL SYSTEM EFFICIENT BY DESIGN FIVE-YEAR WARRANTY
CORNELL SELF-PRIMING PUMPS STX & STL SERIES INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL SYSTEM FIVE-YEAR WARRANTY SELF-PRIMING PUMPS CORNELL Efficient, durable, innovative and dependable are all words that
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationSeries SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec
WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec Series SR Compact Centrifugal Mag-Drive Pumps Providing environmentally safe sealless, magnetic pumps of the highest quality for over 30
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationVertical Heavy Duty Pumps
Vertical Heavy Duty 7550 Series Vertical End Suction 7600 Series Top Pull Out Enclosed Column Centrifugal Vortex Non Clog Slurry Cantilever TM Vertical? For all process services and applications, the Gusher
More informationWilo IL Vertical Split-Coupled Inline Pumps
Wilo IL Vertical Split-Coupled Inline Pumps Vertical Inline Split-Coupled, Single Stage Pumps March, 2013 Marcos D. Roimicher, Product Manager BS Market Segment, Product Management Department 120-08-002-0313
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Standard Pumps Manufacturing Plants Today Ruhrpumpen is a worldwide company, with a network of global manufacturing plants in different countries and
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationGoulds HSU, HSUL & JCU. Submersible Pumps
Goulds HSU, HSUL & JCU Submersible Pumps Goulds HSU, HSUL, JCU Model HSU Hydro-solids pumps. Recessed impeller easily accommodates large, stringy and fibrous solids without clogging. Because it is completely
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
0 Third Street Piqua, Ohio 6-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G--/ G6--/ SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM - 60Hz.
More informationINDUSTRIAL AND MARINE PUMPING SOLUTIONS
INDUSTRIAL AND MARINE PUMPING SOLUTIONS WHEN THE GOING GETS TOUGH THE TOUGH KEEP GOING AND GOING AND GOING AND GOING AND GOING... GILKES PUMPING SYSTEMS PUMPING SYSTEMS INDUSTRIAL AND MARINE PUMPING SOLUTIONS
More informationCORNELL PUMP COMPANY MINE DEWATERING WHEN RELIABILITY MATTERS
CORNELL PUMP COMPANY MINE DEWATERING WHEN RELIABILITY MATTERS MINE DEWATERING high efficiency SETTING THE STANDARD Cornell s Redi-Prime pumps are designed and engineered for the most rugged and demanding
More informationUnequaled I Unrivaled I Performance
Unequaled I Unrivaled I Performance Peerless Pump - 2005 Dr Martin Luther King Jr Street, Indianapolis, IN 46202 Ph: (317) 925-9661 fax: (317) 924-7388 www.peerlesspump.com www.epumpdoctor.com VERTICAL
More informationSUBMERSIBLE SOLIDS HANDLING PUMPS Features and Benefits:
SUBMERSIBLE SOLIDS HANDLING PUMPS Features and Benefits: Oil Filled Motors Cooler operating than air filled motors and continuous lubrication of the bearings for longer life Slip Fit Stators For easy of
More information- Sewage and Sludge Pumps
- Sewage and Sludge Pumps Technology redefined range of Submersible Sewage and Sludge Pumps are designed to perform impecably in the worst of conditions. Global Approach Keeping in mind the causes of blockage
More informationbrands you trust. The Next Generation of SH Series Pumps BARNES SH SERIES PUMPS
brands you trust. The Next Generation of SH Series Pumps BARNES SH SERIES PUMPS Model SH Series Clogging Resistance Treatment plant operators and utility customers biggest problem continues to be clogging
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog Ruhrpumpen offers a wide range of standard pump designs and sizes providing energy efficient solutions for the vast majority
More informationIndustrial. Solutions brands you trust. Product Overview
Industrial Solutions brands you trust. Product Overview Industrial Pump Applications Crane & Systems design s the most efficient and economical pumps to serve the large diversity of industrial applications
More informationMARLOW PUMPS RECIRCULATION
End suction centrifugal pump line available in both close coupled and frame mounted configurations allow users to meet exactly most flow conditions on commercial pool and waterpark applications. Features
More informationFLANGE-MOUNT CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES GV6 SECTION E PAGE ISSUED /0 REPLACES /0 FLANGE-MOUNT CENTRIFUGAL PUMPS Idel for OEM applications
More informationMODEL 664A MODEL 662A MODEL 663A MODEL 661A AURORA. 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS
MODEL 662A MODEL 664A MODEL 661A MODEL 663A AURORA 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS WWW.AURORAPUMP.COM 2 AURORA 660 Series Single Stage Solids Handling Vortex Pumps Capacities to 2600
More informationSubmersible and Immersible Pumps
Submersible and Immersible Pumps for sewage & sludges A range of quality pumps featuring the unique Hidrostal Screw Centrifugal Impeller. Models are available for fully, partially submerged or dry installation
More informationNJWEA TECH TRANSFER MARCH 1, 2016
Applications Immersible Dry Pit Design Considerations Scott Hansen & Andrew Stein Dave Heiner Associates Always submerged Immersible Can be submerged for a finite amount of times. Dry Pit submersible Located
More informationSERIES 1600 Quality Design Features Assure Long, Trouble-Free Service
Vortex End Suction SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Food Processing Solids Waste Water Treatment Pollution Control Slurries Industrial Process
More informationHASSLE FREE SUBMERSIBLE DL
HASSLE FREE SUBMERSIBLE DL Run dry capable, standard cooling jacket and high chrome wear parts means this rugged submersible slurry pump is the last thing you ll need to worry about in your busy day Hassle
More informationSeries 4XSHV 18 Frame Driver 76mm Spherical Solids Handling
18 Frame Driver 76mm Spherical Solids Handling Specifications: DISCHARGE...4", 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE...104 F (40 C) Continuous VOLUTE...Cast
More informationENGINE DRIVEN PUMPS PRODUCTS
ENGINE DRIVEN PUMPS PRODUCTS Red Lion Pumps With over 80 years of experience, Red Lion is the leader in water transfer pumps. Count on Red Lion to help you select the best well pump for your needs. What
More informationTYPE VSM/VSMS VERTICAL SPACE MISER PUMPS
PACO VSM/VSMS TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS Close and Split Coupled VERTICAL SPACE MISER Type VSM (Close Coupled) Type VSMS (Split Coupled) SMALL FOOTPRINT FOR TIGHT SPACES > Vertically mounted
More informationSECTION STEAM CONDENSATE PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
More informationMinerals. WARMAN Centrifugal Slurry Pumps SHW Submersible Slurry Pump
Minerals WRMN entrifugal Slurry s SHW Submersible Slurry The Warman SHW submersible slurry pump offers exceptional wear life and reliability, with low ownership costs. uilt to last The design process of
More informationPumps SELECTION OF A PUMP
Pumps SELECTION OF A PUMP A water system needs to move the water produced from the source to its customers. In almost all cases in Minnesota, the source is at a lower elevation than the user so the water
More informationSUMP PUMPS, EFFLUENT PUMPS AND SEWAGE PUMPS
SUMP PUMPS, EFFLUENT PUMPS AND SEWAGE PUMPS FW19 17 Supersedes 11 FOR WATER REMOVAL vortex impeller on submersible models SE Premium vertical switch Thermal overload protected Cast iron or thermoplastic
More informationSECTION PLUMBING EQUIPMENT Piping (Plumbing). 2. Division 16 - Electrical Wiring and Connections.
SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15410 - Piping (Plumbing). 2. Division 16 - Electrical Wiring and Connections. 1.02 SUBMITTALS A. Submit properly identified
More informationSTAINLESS STEEL UNITS
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationB. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationKTV DEWATERING PUMPS
www.tsurumi-global.com DEWATERING PUMPS Submersible Lightweight Compact Dewatering Pumps Tsurumi -series features submersible pumps of lightweight compact design. The pump body is made of die-casted aluminium
More informationGoulds Trash Hog. Self-Priming Solids Handling Pump
Goulds Trash Hog Self-Priming Solids Handling Pump Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6,000 GPM (1,363 m3/h) Heads to 140 feet (43 m) Temperatures
More informationFull-line Product Overview
Full-line Product Overview End Suction Centrifugal Pumps This general purpose pump can be configured in frame-mounted and close-coupled, semi-open and enclosed impeller configurations. They are available
More informationDS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP
DS series Industrial End Suction Pumps ISO/DP 5199 www.sterlingpumps.com.au DS series Capacities from: Heads from: 340 to 5,680 m3/h (1,500 to 25,000 USPGM) 21 to 106 metres (70 to 350 feet) Power range
More informationCPVC Horizontal. Series HV. Centrifugal Pump. Flows to 132 GPM Pressure to 81 Ft. TDH. Model HV-1 1/2DV
Series HV Flows to 132 GPM Pressure to 81 Ft. TDH Model HV-1 1/2DV CPVC Horizontal Centrifugal Pump Features: True Volute Design High Efficiency Energy Saving Higher Flow vs. Pressure No Metal Contact
More informationTECHNICAL. Series 18. Pump Packages
TECHNICAL S Y S T E M S Series 18 Pump Packages Series 18 Pump Packages Standard Features Close-coupled, end-suction, centrifugal pumps Mounted and wired pump starters Hand-Off-Auto switch for each pump
More informationFAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS.
FAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS www.fairbanksnijhuis.com FAIRBANKS NIJHUIS History and Development Since the early part of this century, Fairbanks Nijhuis Pump has set industry standards in innovative
More informationExcellent Engineering Solutions. Solids Handling Pumps. Recessed Vortex Impeller Pumps CLEAR LIQUID
Solids Handling Pumps Excellent Engineering Solutions Recessed Vortex Impeller Pumps CLEAR LIQUID The Vortex Principle The VORTEX technique developed by WEMCO is based on the principle of a whirlpool :
More informationElectric Submersible Pumps
Electric Submersible Pumps Versatile pumps with a wide variety of applications www.multiquip.com Electric Submersible Pumps Bolt-on discharge port allows easy replacement Cast aluminum housing for light
More informationC. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers.
SECTION 22 10 00 PLUMBING PIPING AND PUMPS PART 1 - GENERAL 1.1 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.
More informationQuick Facts DEC. CUTTING EDGE Cantilevers DEC/ DC
Toyo Pumps North America s DEC (recessed impeller) and DC (closed impeller) series of vertical cantilevers are serious slurry handling machines of true cantilever design, meaning no submerged bearings,
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More information3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet
3020/3120 Series Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet A Crane Co. Company DEMING PUMPS Introducting Deming 3020/3120 Series End-Suction
More informationSUBMERSIBLE SOLIDS HANDLING PUMPS
SUBMERSIBLE SOLIDS HANDLING PUMPS Features and Benefits: Oil Filled Motors Cooler operating than air filled motors and continuous lubrication of the bearings for longer life Slip Fit Stators For easy of
More informationSERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Water and Other.00
More informationTYPE LF/LC/LCV END SUCTION PUMPS
PACO LF/LC/LCV TYPE LF/LC/LCV END SUCTION PUMPS Close Coupled and Frame Mounted END SUCTION PUMPS Type LF (Frame Mounted) Type LC (Close Coupled) Type LCV (Vertically Mounted Close Coupled) Grundfos CBS
More information6-30 Vertical Deep Well. Close Coupled Vertical Turbine Submersible Turbine. Pump Type. Application. Description. Materials
A GORMAN-RUPP COMPANY Pump Type 6-30 Vertical Deep Well Close Coupled Vertical Turbine 6-30 Submersible Turbine Application Agricultural Irrigation, Municipal Water Supply, Industrial Process Water, Golf
More informationModel 6050-Series. PumpAgents.com - buy pumps and parts online SELF-PRIMING PUMPS. Model 6050-Series
PumpAgents.com - Click here for Pricing/Ordering Model 6050-Series SELF-PRIMING PUMPS FEATURES Body: Impeller: Shaft: Wearplate: Shaft Seal: Ports: Motor: Weight: Bronze Construction JABSCO Nitrile 316
More informationEngineered Basins Affordable, effective pressure sewer system Rocky, hilly, wet and flat topography Dependable, reliable and cost effective
brands you trust. Engineered Basins Affordable, effective pressure sewer system Rocky, hilly, wet and flat topography Dependable, reliable and cost effective ENGINEERED BASIN SERIES Barnes Pressure Sewer
More information5. CONDENSATE PUMPS/UNITS
INDEX Condensate Systems/Pumps GENERAL INFORMATION BURKS PARTS I&O MANUALS. CONDENSATE PUMPS/UNITS PUMP TYPES: GV GV6 USA: (937) 778-8947 Canada: (90) 47-6223 International: (937) 61-398 A 7/1 Condensate
More informationSERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WPT SECTION 4C PAGE 5 ISSUED /0 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Perchlorethylene
More informationSERIES ES BASE MOUNTED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES ES PAGE BASE MOUNTED TURBINE PUMPS ES - 75 RPM - 60Hz. ES - 350 RPM - 60Hz. (See Individual curves for symbol number) ES - 900 RPM - 50Hz. (See Individual
More informationJ SERIES. Technical Specifications. Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps. Features
Steam Traps Condensate Boiler Feed Valves Strainers Pumps J SERIES Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps Technical Specifications The Sterlco J Series Centrifugal Pumps are designed
More informationSERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WPT SECTION 4C PAGE 5 ISSUED /0 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Perchlorethylene
More informationPhiloWilke Partnership Addendum No. 2 A/E Project No April 2016
SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.
More informationThe SALA Series of. Vertical & horizontal ST Pumps. Tough, general purpose slurry pumps. ST pumps
The SALA Series of Vertical & horizontal ST Pumps Tough, general purpose slurry pumps ST pumps 1 The Sala-series of ST Pumps The ST-Pump range consists of tough, general purpose slurry pumps particularly
More informationAmpco s Complete Line of AC SERIES PUMPS AC, AC+, IC+
Ampco s Complete Line of AC SERIES PUMPS AC, AC+, IC+ AC/AC+ pumps are in compliance with Standards and offer these additional advantages: Low Cost AC parts are 100% interchangeable with other brands 316L
More informationAmerica s Most Versatile Line of Centrifugal Pumps
America s Most Versatile Line of Centrifugal Pumps OEM Development Price Pump Co. has a storied history of developing products specific to the requirements of many original equipment manufacturers in industry
More informationGH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM
GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM The GH Series The GH is Carver s horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general
More informationDean Pump High Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump High Temperature Chemical Process Inline Pumps Series DL Dean Pump Series DL High Temperature Chemical Process Inline Pumps Capacities to 600 GPM (182 m 3 /hr) Heads to 0 feet
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog More Than 60 Years Developing The Pumping Technology That Drives Progress Engineering Excellence Ruhrpumpen is an innovative
More informationSeries P. Installation & Maintenance. Materials: A - CPVC B - Polypropylene C - PVDF
Series P Installation & Maintenance Models: P-/5 P-/6 P-/4 P-/ P-/-HP P-3/4 P-3/4HP P- P- / P- P-3 P-5 P-7 / Materials: A - CPVC B - Polypropylene C - PVDF Introduction Penguin Pumps are designed to handle
More information316 Stainless Steel Close- Coupled Self-Priming Flexible Impeller Pumps
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationMODEL 652A MODEL 654A MODEL 652A MODEL 653A MODEL 651A AURORA. 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS
MODEL 652A MODEL 654A MODEL 652A MODEL 651A MODEL 653A AURORA 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS WWW.AURORAPUMP.COM 2 AURORA 650 Series Single Stage Solids Handling Pumps Capacities to 2000
More informationD. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationMachine Tool Coolant Units
Machine Tool Coolant Units Drill presses, tool grinders, tapping machines, cut-off saws, bench mills, lathes /5 HP fan-cooled motor Vertical machine coolant VMC- Capacity: GPH @ ' 9 LPH @. m Liquid Temperature:
More informationSHURFLO 316 STAINLESS STEEL CLOSE-COUPLED SELF-PRIMING FLEXIBLE IMPELLER PUMPS OPERATION INSTRUCTIONS, PERFORMANCE, SPECIFICATIONS & PARTS MANUAL
SHURFLO 316 STAINLESS STEEL CLOSE-COUPLED SELF-PRIMING FLEXIBLE IMPELLER PUMPS OPERATION INSTRUCTIONS, PERFORMANCE, SPECIFICATIONS & PARTS MANUAL MODELS MRS9000, MRS9001, MRS9900, MRS9901, MRS15000, MRS15001
More informationSpecifications Information and Repair Parts Manual 316A-95, 316B-95, 393A-95, 393B A-95 thru 394D-95, 399A-95
Specifications Information and Repair Parts Manual 316A-95, 316B-95, 393A-95, 393B-95 394A-95 thru 394D-95, 399A-95 Please read and save this Repair Parts Manual. Read this manual and the General Operating
More informationA. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationMINING EFFICIENT BY DESIGN
MINING MINE DEWATERING HIGH EFFICIENCY SETTING THE STANDARD Cornell s Redi-Prime pumps are designed and engineered for the most rugged and demanding industries; construction, industrial, rental and municipal.
More informationPAPANTONATOS. We supply clean water and remove waste water. P u m p s s e r v ic e & e n g i nee r in g. submersible pumps. s e w a g e p u m p s
PAPANTONATOS P u m p s s e r v ic e & e n g i nee r in g We supply clean water and remove waste water s e w a g e p u m p s submersible pumps The Company QUALITY WHICH REDUCES PUMPING COSTS For over 45
More informationGRUNDFOS PLUMBING & HVAC PRODUCTS
GRUNDFOS PLUMBING & HVAC PRODUCTS SERIES UP CIRCULATORS GRUNDFOS CIRCULATORS FOR HEATING AND HOT WATER RECIRCULATION Quiet, maintenance-free performance Stainless steel construction, corrosion resistant
More informationSTATION MODEL: KPCG21-24x48 PUMP MODEL: KEEN KPCG21 VOLTAGE: 230 PHASE: 1 TANK DIMENSIONS: 24 DIAMETER X 48 DEEP
STATION MODEL: KPCG21-24x48 PUMP MODEL: KEEN KPCG21 VOLTAGE: 230 PHASE: 1 TANK DIMENSIONS: 24 DIAMETER X 48 DEEP PUMP Grinder Pumps KPCG-21 1HP Dual Seal, High Performance Progressive Cavity Grinder Pump,
More informationDNJ SERIES PUMPS END SUCTION CLOSE COUPLED
DNJ SERIES PUMPS END SUCTION CLOSE COUPLED DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards
More information489G DESCRIPTION CAST IRON UNITS BRONZE UNITS 316 STAINLESS STEEL UNITS. Maintenance. General Safety Information for 12 Volt DC Power
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationPatterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationVSA SEWAGE PUMP. Capacities to 1600 gpm, Heads to 120, Horsepower range 3/4 thru 40, 3 thru 6 discharge, 1750 and 1150 operation.
Brochure# 228E 122011 TYPE VSA SEWAGE PUMP Capacities to 100 gpm, Heads to 120, Horsepower range 3/ thru 0, 3 thru discharge, 1750 and 1150 operation. HIGHLIGHTS Wet-Pit Installations Pumps Suspend From
More information